Knives, collection knife, tactical knives, outdoor knives, pocket knives and tools
-
Sandrin knives - Torino knife FC - Recoil Lock - Tungsten Carbide Blade - Carbon Fiber - knife
With the Sandrin knives brand, Turmond manufactures the blades of its knives using tungsten carbide which, through a sophisticated manufacturing process, reach the extraordinary hardness of 71 HRC, while maintaining at the same time a high torsion capacity and resilience.
Sandrin model Torino; innovation and inspiration come together in this EDC knife featuring exceptional blade material, ergonomic handle design and a revolutionary new locking mechanism. The Torino model's ceramic ball bearing action offers an extremely fluid opening and closing experience. What truly makes the Torino a modern marvel is a completely redesigned mechanism called the Recoil Lock. The closing of the knife is obtained by sliding the rear spacer towards the rear, eliminating the accidental release of the blade.
This elegant knife, made with Sandrin's patented tungsten carbide blade with StaySharp Technology ™, keeps a clean and sharp edge longer than traditional steel blades.
Intended use: Sports / Collection
Total length: 174mm
Blade length: 75mm
Blade thickness: 1.20 mm
Blade material: hardness 71 HRC polyhedral tungsten carbide
Finish: mirror polished / DLC coating
Handle length: 98mm
Handle thickness: 6mm
Handle material: Carbon fiber
Color: Black PVD Coating
Weight: 63 grams
Pocket clip: removable - reversible
Pocket Clip Detail: Black PVD Stainless Steel Coating
Lock Type: Recoil Lock
Country of production: ItalySK-TORINO-FC -
Higonokami - Kanekoma knife - Black Small Pocket Knife Japan
Charming knife used by the Japanese farmer.
As is typical for many agricultural tools, this Japanese knife is also extremely simple but the result of a centuries-old improvement that has found the difficult balance between form and function, and between cost and benefit.
The main feature is certainly the quality of the blade, in fact it uses a three-layer San Mai steel, of which the very hard one in the center.
It has a razor wire, as befits a tool created to cut and not just to be displayed in display cases.
Blade: San Mai carbon steel - Yasuki Steel Blue Paper Steel 62hrc in clad
Handle: iron foil
Closing: without blade lock
Length closed: 92mm.
Blade length: 76mm.
Blade thickness: 2.7mm
Open length: 155mm
Weight: 33g.
Note:HIGO-06BL€21.31Only 11 left -
Higonokami - Kanekoma - Miyamoto Musashi M Pocket Knife Japan
Higonokami - Kanekoma - Miyamoto Musashi M Pocket Knife Japan
Blade: Carbon Steel San Mai - Yasuki Steel Blue Paper Steel 60HRC clad in
Handle: iron sheet
Closure: Without lock blade
Closed Length: 97mm.
Blade length: 75mm.
Blade thickness: 3mm
Overall length: 172mm
Weight: 42g.
Notes: Engravings on the handle and the blade. Lubricate the blade otherwise easily subject to oxidation.HIGO07SL€23.77Only 4 left -
Higonokami - Kanekoma - Miyamoto Musashi S Pocket Knife Japan
Higonokami - Kanekoma - Miyamoto Musashi S Pocket Knife Japan
Blade: Carbon Steel San Mai - Yasuki Steel Blue Paper Steel 60HRC clad in
Handle: iron sheet
Closure: Without lock blade
Closed Length: 97mm.
Blade length: 65mm.
Blade thickness: 3mm
Overall length: 153mm
Weight: 46g.
Notes: Engravings on the handle and the blade. Lubricate the blade otherwise easily subject to oxidation.HIGO-06SL€21.31Only 12 left -
Higonokami - Sadakoma Higo in black leather - PRIVATE COLLECTION - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased.
* Condition: Overall in very good condition
* Commercially available: Discontinued
* Sharpening: Factory sharpened
* Marks on blade: None
* Marks on handle: None
* Box: Present
* Scabbard: -
* Manuals, Certificates and Warranties: -
* Checked and Certified by our in-house laboratoryFascinating knife used by the Japanese farmer "Higonokami kanekoma."
As is typical for many agricultural tools, this Japanese knife turns out to be extremely simple but the result of centuries of refinement that has found the difficult balance between form and function, and between cost and benefit.
The main feature definitely turns out to be the quality of the blade, in fact it uses a three-layer San Mai steel of which the one in the center is extremely hard.
Production: Japanese craftsmanship
Blade: San Mai carbon steel - Yasuki Steel Blue Paper Steel 62hrc
Handle: brass foil with elegant black leather cover
Closure: without blade lock
Length closed: 120mm.
Blade length: 90mm.
Blade thickness: 3mm
Length open: 210mm
Weight: 72g.
Notes: lubricate the blade well otherwise easily subject to oxidation.
Packaging: elegant and fine wooden box with Japanese ideograms.018208-CP€0.00Only -20 leftOut of stock -
Sandrin knives - Monza Zirconium knife - Recoil Lock - Tungsten Carbide Blade - knife
With the Sandrin knives brand, Turmond manufactures the blades of its knives using tungsten carbide which, through a sophisticated manufacturing process, reach the extraordinary hardness of 71 HRC, while maintaining at the same time a high torsion capacity and resilience.
Intended use: Sports / Collection
Total length: 197mm
Blade length: 78mm
Blade thickness: 1.30 mm
Blade material: hardness 71 HRC polyhedral tungsten carbide
Finish: -
Handle length: 110 mm
Handle material: Zirconium
Color:
Weight: 138 grams
Pocket clip: removable - reversible
Pocket clip detail: -
Lock Type: Recoil Lock
Country of production: ItalySK-MONZA-Z -
Sandrin knives - Monza Titanium knife - Recoil Lock - Tungsten Carbide Blade - knife
With the Sandrin knives brand, Turmond manufactures the blades of its knives using tungsten carbide which, through a sophisticated manufacturing process, reach the extraordinary hardness of 71 HRC, while maintaining at the same time a high torsion capacity and resilience.
Intended use: Sports / Collection
Total length: 197mm
Blade length: 78mm
Blade thickness: 1.30 mm
Blade material: hardness 71 HRC polyhedral tungsten carbide
Finish: mirror polished / DLC coating
Handle length: 110 mm
Handle material: Titanium
Color:
Weight: 98 grams
Pocket clip: removable - reversible
Pocket clip detail: -
Lock Type: Recoil Lock
Country of production: ItalySK-MONZA-T -
Sandrin knives - Torino knife - Recoil Lock - Tungsten Carbide Blade - G-10 Red - knife
With the Sandrin knives brand, Turmond manufactures the blades of its knives using tungsten carbide which, through a sophisticated manufacturing process, reach the extraordinary hardness of 71 HRC, while at the same time maintaining a high torsion capacity and resilience.
Sandrin model Torino; innovation and inspiration come together in this EDC knife featuring exceptional blade material, ergonomic handle design and a revolutionary new locking mechanism. The Torino model's ceramic ball bearing action offers an extremely fluid opening and closing experience. What truly makes the Torino a modern marvel is a completely redesigned mechanism called the Recoil Lock. The closing of the knife is obtained by sliding the rear spacer towards the rear, eliminating the accidental release of the blade.
This elegant knife made with a patented tungsten carbide blade with Sandrin's patented StaySharp Technology ™ keeps a clean and sharp edge for longer than traditional steel blades.
Intended use: Sports / Collection
Total length: 174mm
Blade length: 75mm
Blade thickness: 1.20 mm
Blade material: hardness 71 HRC polyhedral tungsten carbide
Finish: mirror polished / DLC coating
Handle length: 98mm
Handle thickness: 6mm
Handle material: red G10
Color: Black PVD Coating
Weight: 64 grams
Pocket clip: removable - reversible
Pocket Clip Detail: Black PVD Stainless Steel Coating
Lock Type: Recoil Lock
Country of production: ItalySK-TORINO -
Sandrin knives - Sandrin knives - Dellatorre SK-1 Slipjoint knife - Tungsten Carbide Blade - DLC black coating - knife
With the Sandrin knives brand, Turmond manufactures the blades of its knives using tungsten carbide which, through a sophisticated manufacturing process, reach the extraordinary hardness of 71 HRC, while at the same time maintaining a high torsion capacity and resilience.
The Dellatorre is an elegant knife with an innovative design that redefines the classic pocket knife. Its name derives from the Val della Torre, a city located on the picturesque foothills of Piedmont, where Sandrin knives are born and worked.
This elegant knife made with a patented tungsten carbide blade with Sandrin's patented StaySharp Technology ™ keeps a clean and sharp edge for longer than traditional steel blades. Slim and elegant, the Lanzo slips gracefully into your pocket until you need it.Intended use: Sports / Collection
Total length: 180mm
Blade length: 80mm
Blade thickness: 0.91mm
Blade material: hardness 71 HRC polyhedral tungsten carbide
Finish: mirror polished / DLC coating
Handle length: 98mm
Handle thickness: 6mm
Handle material: stainless steel
Color: Black PVD Coating
Weight: 74 grams
Pocket clip: removable - reversible
Pocket Clip Detail: Black PVD Stainless Steel Coating
Lock type: Slipjoint
Country of production: ItalySK-1 -
Sandrin knives - TCK 2.0 Slipjoint knife - Tungsten Carbide Blade - DLC black coating - knife
With the Sandrin knives brand, Turmond manufactures the blades of its knives using tungsten carbide which, through a sophisticated manufacturing process, reach the extraordinary hardness of 71 HRC, while at the same time maintaining a high torsion capacity and resilience.
Sharper, thinner and harder than any blade ever made, TCK is an ultra-thin and easily portable folder.
This elegant knife made with a patented tungsten carbide blade with Sandrin's patented StaySharp Technology ™ keeps a clean and sharp edge for longer than traditional steel blades. Slim and elegant, the Lanzo slips gracefully into your pocket until you need it.
Intended use: Sports / Collection
Total length: 198mm
Blade length: 80mm
Blade thickness: 0.91mm
Blade material: hardness 71 HRC polyhedral tungsten carbide
Finish: mirror polished / DLC coating
Handle length: 80mm
Handle thickness: 6 mm
Handle material: stainless steel
Color: Black PVD Coating
Weight: 60 grams
Pocket clip: removable - reversible
Pocket Clip Detail: Black PVD Stainless Steel Coating
Lock type: Slipjoint
Country of production: ItalyTCK2.0 -
Sandrin knives - Lanzo SK-2 knife - Tungsten Carbide Blade - DLC black coating - knife
With the Sandrin knives brand, Turmond manufactures the blades of its knives using tungsten carbide which, through a sophisticated manufacturing process, reach the extraordinary hardness of 71 HRC, while maintaining at the same time a high torsion capacity and resilience.
The Lanzo, with its wave-shaped blade, is designed for cutting and slicing when you are not looking for a tipless knife. It takes its name from the winding "road" located at the foot of Piedmont, Italy, where Sandrin knives are born and made.
This sleek design made from patented tungsten carbide with Sandrin's patented StaySharp Technology ™ keeps a clean, sharp edge longer than traditional steel blades. Slim and elegant, the Lanzo slips gracefully into your pocket until you need it.
Intended use: Sports / CollectionTotal length: 180 mm
Blade length: 79 mm
Blade thickness: 0.0889 mm
Blade material: hardness 71 HRC polyhedral tungsten carbide
Finish: mirror polished / DLC coating
Handle length: 98 mm
Handle thickness: 10.5 mm
Handle material: stainless steel
Color: Black PVD Coating
Weight: 74 grams
Pocket clip: removable - reversible
Pocket Clip Detail: Black PVD Stainless Steel Coating
Lock type: Slip joint
Country of production: ItalySK-2 -
Higonokami - Kanekoma knife - Black Medium Pocket Knife Japan
Charming knife used by the Japanese farmer.
As is typical for many agricultural implements, this Japanese knife is also extremely simple but the result of a centuries-old improvement that has found the difficult balance between form and function, and between cost and benefit.
The main feature is certainly the quality of the blade, in fact it uses a three-layer San Mai steel, of which the very hard one in the center.
It has a razor wire, as befits a tool created to cut and not just to be displayed in display cases.
Blade: San Mai carbon steel - Yasuki Steel Blue Paper Steel 62hrc in clad
Handle: iron foil
Closing: without blade lock
Length closed: 11mm.
Blade length: 72mm.
Blade thickness: 2.7mm
Open length: 170mm
Weight: 42g.
Note:HIGO-07BL€23.77Only 0 leftOut of stock -
Brian Tighe and Friends - Tighe Fighter Large knife Blackwash Grey Aluminum Flipper - 1100-3BG - knife
Intended use: collection
Type of production: mid tech
Country of production: USA
Blade: CPM-154CM stainless steel
Blade treatment: Blackwash
Handle: Aluminum
Blade length: 94mm.
Blade thickness: 5mm.
Length closed: 130m.
Total length: 226mm.
Thick when closed: 16mm.
Weight: 128g.
Closing: Plunge Lock
Clip: in steel
Notes: numbered series
Packaging: in cardboard with Brian Tighe and Friends logos, Design by Brian Tighe, opening system on IKBS type ball bearings with Carson Flipper type openingBT-1100-3BG -
Brian Tighe and Friends - Tighe Fighter Large Fixed Carbon Fiber - 1104-1 - knife
Destination of use: collection
Type of production: mid tech / semi-custom
Country of production: USA
Blade: 154CM stainless steel
Blade treatment: Satin
Handle: Carbon fiber
Blade length: 124mm.
Blade thickness: 6.3mm.
Total length: 254mm.
Balancing: on the guard branch
Weight: 220g.
Sheath: Kydex
Packaging: cardboard with logos Brian Tighe and Friends, Design by Brian Tighe
Notes: numbered seriesBT1104-1 -
Brian Tighe and Friends - Tigers Fighter Large knife G10 Flipper - 1100-3 - knife
Destination of use: collection
Type of production: semi-custom
Lama production: USA
Blade: 154CM stainless steel
Lama treatment: Satin
Handle: G10
Blade length: 94mm.
Blade thickness: 5mm.
Length closed: 130m.
Total length: 226mm.
Thick when closed: 16mm.
Balancing: -
Weight: 134g.
Closing: Plunge Lock
Clip: in steel
Notes: numbered series
Packaging: cardboard with logos Brian Tighe and Friends, Design by Brian Tighe, opening system on ball bearings of type IKBS with Carson Flipper openingBT1100-3 -
Brian Tighe and Friends - Tighe Breaker Small Integral Pinball - 1202-1 - knife
Destination of use: collection
Type of production: semi-custom
Lama production: USA
Blade: CPM S30V stainless steel
Lama treatment: Satin
Handle: titanium
Blade length: 84mm.
Blade thickness: 3mm.
Length closed: 115mm.
Total length: 204mm.
Thick when closed: 12mm.
Balancing: -
Weight: 114g.
Closing: Plunge Lock
Clip: titanium
Notes: numbered series
Packaging: cardboard with logos Brian Tighe and Friends, Design by Brian Tighe, opening system on ball bearings of type IKBS with Carson Flipper openingBT1202-1 -
Valyrian Steel - Catspaw VS0102 Blade - Game of Thrones Game of Thrones
A blade of Valyrian steel that Catelyn Stark recovered from the assassin sent to finish her son Bran. It was taken to King’s Landing by Lady Stark and shown to Petyr Baelish, who identified it as belonging to Tyrion Lannister. This adult collectible is officially licensed from HBO®'s hit series Game of Thrones® and is an edition strictly limited to 2500 pieces.
The Game of Thrones® Collection is a series of collectible weapons and armor painstakingly recreated from the actual props used on HBO®’s hit fantasy epic Game of Thrones®. The officially licensed collectibles are made from the highest quality materials and have been crafted with special attention to reproduce the authentic details found on the props.
This item is not a toy, please keep out of the reach of children. This replica is intended solely for display purposes as a collector's item. Official HBO Licensed Product © 2012 Home Box Office, Inc. All Rights Reserved. Game of Thrones is a trademark of Home Box Office, Inc. Produced under License by Jalic Inc.
Overall Length: 19.5"
Blade Length: 10"
Blade Material: High carbon damascus steel
Handle: Faux "dragon bone" grip with 24k gold plated metal parts.
Plaque: Silkscreened wood with Game of Thrones® motif.VS0102€409.02Out of stock -
Kanekoma - Sadakoma Higo traditional Japanese knife - brown leather 018 209 - knife
Kanekoma - Sadakoma Higo traditional Japanese knife - brown leather 018 209 - knife
Charming knife used by the Japanese farmer " Higonokami kanekoma ."
As is typical for many agricultural tools , this Japanese knife is extremely simple but the result of a secular improvement that has found it difficult balance between form and function, and between cost and benefit.
The main feature is definitely the quality of the blade, in fact, uses a steel San Mai to three layers of which the one at the center rough .
It has a razor wire , as is appropriate for a tool to cut and not just born to be displayed in glass cases .
production: Japanese crafts
Blade : carbon steel, San Mai
Handle: black brass plate with elegant brown leather cover
Closure: Without lock blade
Closed Length : 120mm .
Blade length : 90mm .
Blade thickness : 3mm
Length open : 210mm
Weight: 72g .
Notes: lubricate the blade otherwise easily subject to oxidation .
Packing: elegant and fine wooden box with Japanese characters018209€0.00Only -20 leftOut of stock