Knives, collection knife, tactical knives, outdoor knives, pocket knives and tools
-
Kasumi Japan - Sharpening stone - Grain 240/1000 - 80001 - knives accessories
The Kasumi 80001 combination whetstone with rough (240) and medium (1000) grit.
If your knife edge is in poor condition, start sharpening with the rough # 240 grit of the whetstone.
If your knife is in average condition, start with the # 1000 medium grit of the whetstone.
These two grits will keep your knives sharp enough for normal home use.
The whetstone comes with a hard rubber base for use when sharpening.
There is also a small abrasive stone to be used to grind the surface of the stone.
Dimensions:
length 175 x width 60 x height 25 mm - Weight: 635g.
Quality level: very highKJ80001 -
Kasumi Japan - Sharpening stone - Grain 3000/8000 - 80002 - knives accessories
Kasumi 80002 combination sharpening stone with fine (3000) and superfine (8000) grit. Excellent for giving your knives a razor sharpening.
The # 8000 grit was developed specifically for knives and knives made of special steels.
# 8000 grit is nearly the same grain and quality as a natural whetstone used to sharpen Japanese samurai swords.
With the right technique and experience, the # 3000 / # 8000 whetstone combination will give your knives a beautiful mirror edge, just like the edge of a samurai sword.
The whetstone comes with a hard rubber base for use when sharpening.
There is also a small abrasive stone to be used to grind the surface of the stone.
Dimensions:
length 175 x width 60 x height 25 mm - Weight: 635g.
Quality level: very highKJ80002 -
Hardcore Hardware Australia - MFK-04 GEN II - Desert - knife
Intended use: Tactical / Military
Type of production: Industrial
Country of production: Australia
Blade: full tang in steel D2 at 58 / 60HRC
Blade treatment: Teflon coating
Handle: G10
Blade length: 130mm.
Blade thickness: 6mm.
Total length: 267mm.
Balancing: Advanced
Weight: 319g.
Sheath: in Kydex, with Tek-Lok attacks
Packaging: cardboard box
Note: -HH-MFK04D€220.49Out of stock -
Hardcore Hardware Australia - MFK-02 GEN II - Desert - knife
Intended use: Tactical / Military
Type of production: Industrial
Country of production: Australia
Blade: full tang in steel D2 at 58 / 60HRC
Blade treatment: Teflon coating
Handle: G10
Blade length: 128mm.
Blade thickness: 6mm.
Total length: 265mm.
Balancing: Advanced
Weight: 347g.
Sheath: in Kydex, with Tek-Lok attacks
Packaging: cardboard box
Note: -HH-MFK02D€220.49Out of stock -
DuStar - Model 1 Arad - Tactical Bowie - knife
The model Arad is the very first industrial knife designed, developed, manufactured, tested and perfected in Israel directly. Exploiting the CNC teconolgie and based on a timeless design such as the Randall Model 14, was designed by Alex Shamgar, Israel and produced by the renowned knifemaker ll'esperto Sherutay Erozia, since 1984 manufacturer of industrial castings lost wax molds.
Intended use: Tactical / Military
Type of production: Industrial
Production Blade: Israel
Blade: Stainless D2 56/57HRC
Treatment Blade: micropallinatura
Handle: FRN in (fiberglass reinforced nylon) with micarta spacers and brass guard
Blade length: 180mm.
Blade thickness: 5.5mm.
Length closed: -
Overall length: 298mm.
Thick when closed: -
Balancing: advanced to 1cm. the branch of guard
Weight: 502G.
Closure: -
Clip: -
Sheath: Nylon, ABS with rigid insert
Packaging: Cardboard box with logos Dustar
Notes: Design by Alex Shamgar10843€311.48Out of stock