Knives, collection knife, tactical knives, outdoor knives, pocket knives and tools
-
Kasumi Japan - Sharpening stone - Grain 240/1000 - 80001 - knives accessories
The Kasumi 80001 combination whetstone with rough (240) and medium (1000) grit.
If your knife edge is in poor condition, start sharpening with the rough # 240 grit of the whetstone.
If your knife is in average condition, start with the # 1000 medium grit of the whetstone.
These two grits will keep your knives sharp enough for normal home use.
The whetstone comes with a hard rubber base for use when sharpening.
There is also a small abrasive stone to be used to grind the surface of the stone.
Dimensions:
length 175 x width 60 x height 25 mm - Weight: 635g.
Quality level: very highKJ80001 -
Zwilling - Twin Finishing Stone Pro - sharpening stone grit 3000/8000 - synthetic stone
Stone sharpens knives synthetic, water, double-sided, with non-slip base
The innovative and practical pan plexiglass firmly holds the stone and provides excellent stability and a high level of security during l'affilatura.
Grit: 3000/8000
Stone Size: 17.5x7.5x1cm
Support: Plexiglas with lid and supports slip32505-300 -
Zwilling - Twin Stone Pro - sharpening stone grit 250/1000 - synthetic stone
Stone sharpens knives synthetic, water, double-sided, with non-slip base
The innovative and practical pan plexiglass firmly holds the stone and provides excellent stability and a high level of security during l'affilatura.
Grit: 250/1000
Stone Size: 17.5x7.5x1cm
Support: Plexiglas with lid and supports slip32505-100 -
Zwilling - V-Edge Knife Sharpener Knife sharpeners
Zwilling - V-Edge Knife Sharpener
Knife sharpeners
The ZWILLING V-Edge pull-through knife sharpener quickly, simply and effortlessly sharpens European and Japanese knives at the correct angle to a standard of quality and sharpness comparable only to professional sharpening with a whetstone. The V-Edge combines the advantages of conventional pull-through knife sharpeners and whetstones. Simple to use, it delivers quick and excellent results. The V-shape arranged ceramic sharpening stones evenly sharpen the entire length of the blade without risk of damaging it. The knife sharpener comes with two pairs of ceramic sharpening rods: one set is coarse grain of around 150 grit for re-sharpening dull knives, the other is the medium-fine grain of around 360 grit for maintenance and honing. Spare replacement fine grain rods of around 1000 grit are available for very fine honing.
.Please note, this knife sharpener is not suitable for serrated blades.
Professional knife sharpener
Outstanding and reliable sharpening results
Easy to use
Angle adaptor swaps out for European and Japanese blades
Sharpens at approx. 15° per side for European blades
Sharpens at approx. 10° per side for Japanese blades
Includes pair of coarse grain sharpening rods of 150 grit
Includes pair of medium-fine grain sharpening rods of 360 grit
Diameter: 20 x 8 cm
Height: 21 cm
Weight: 1 kg
32605-000 -
Kasumi Japan - Sharpening stone - Grain 3000/8000 - 80002 - knives accessories
Kasumi 80002 combination sharpening stone with fine (3000) and superfine (8000) grit. Excellent for giving your knives a razor sharpening.
The # 8000 grit was developed specifically for knives and knives made of special steels.
# 8000 grit is nearly the same grain and quality as a natural whetstone used to sharpen Japanese samurai swords.
With the right technique and experience, the # 3000 / # 8000 whetstone combination will give your knives a beautiful mirror edge, just like the edge of a samurai sword.
The whetstone comes with a hard rubber base for use when sharpening.
There is also a small abrasive stone to be used to grind the surface of the stone.
Dimensions:
length 175 x width 60 x height 25 mm - Weight: 635g.
Quality level: very highKJ80002 -
Hardcore Hardware Australia - MFK-04 GEN II - Desert - knife
Intended use: Tactical / Military
Type of production: Industrial
Country of production: Australia
Blade: full tang in steel D2 at 58 / 60HRC
Blade treatment: Teflon coating
Handle: G10
Blade length: 130mm.
Blade thickness: 6mm.
Total length: 267mm.
Balancing: Advanced
Weight: 319g.
Sheath: in Kydex, with Tek-Lok attacks
Packaging: cardboard box
Note: -HH-MFK04D€220.49Out of stock -
Hardcore Hardware Australia - MFK-02 GEN II - Desert - knife
Intended use: Tactical / Military
Type of production: Industrial
Country of production: Australia
Blade: full tang in steel D2 at 58 / 60HRC
Blade treatment: Teflon coating
Handle: G10
Blade length: 128mm.
Blade thickness: 6mm.
Total length: 265mm.
Balancing: Advanced
Weight: 347g.
Sheath: in Kydex, with Tek-Lok attacks
Packaging: cardboard box
Note: -HH-MFK02D€220.49Out of stock