Knives, collection knife, tactical knives, outdoor knives, pocket knives and tools
-
Kasumi Japan - Sharpening stone - Grain 240/1000 - 80001 - knives accessories
The Kasumi 80001 combination whetstone with rough (240) and medium (1000) grit.
If your knife edge is in poor condition, start sharpening with the rough # 240 grit of the whetstone.
If your knife is in average condition, start with the # 1000 medium grit of the whetstone.
These two grits will keep your knives sharp enough for normal home use.
The whetstone comes with a hard rubber base for use when sharpening.
There is also a small abrasive stone to be used to grind the surface of the stone.
Dimensions:
length 175 x width 60 x height 25 mm - Weight: 635g.
Quality level: very highKJ80001 -
Mil-Tac / Fox - finisher - FX-MTF5 knife
Intended Use: Tactical / Sports
Type of production: Industrial
Production Blade: Italy
Blade: Stainless steel N690Co
Treatment Lama: PVD
Handle: G-10
Blade length: 95mm.
Blade thickness: 4mm.
Closed Length: 125mm.
Overall Length: 220mm.
Thick when closed: -
Balance: -
Weight: 203g.
Lock: Liner Lock
Clip: Removable and reversible, stainless steel
Sheath: -
Packaging: Cardboard box with logos Fox FKMDFX-MTF5€89.34Only 1 left -
Kasumi Japan - Sharpening stone - Grain 3000/8000 - 80002 - knives accessories
Kasumi 80002 combination sharpening stone with fine (3000) and superfine (8000) grit. Excellent for giving your knives a razor sharpening.
The # 8000 grit was developed specifically for knives and knives made of special steels.
# 8000 grit is nearly the same grain and quality as a natural whetstone used to sharpen Japanese samurai swords.
With the right technique and experience, the # 3000 / # 8000 whetstone combination will give your knives a beautiful mirror edge, just like the edge of a samurai sword.
The whetstone comes with a hard rubber base for use when sharpening.
There is also a small abrasive stone to be used to grind the surface of the stone.
Dimensions:
length 175 x width 60 x height 25 mm - Weight: 635g.
Quality level: very highKJ80002 -
TRC Knives - Splinter 120 - M390 & Black Canvas Micarta - knife
Intended Use: Hunting / Fishing / Sporting
Production type: Industrial
Country of Production: Lithuania
Blade: Full tang stainless steel M390 60/61HRC
Blade Finish: Satin
Handle: Black Canvas Micarta
Blade length: 120mm.
Blade thickness: 3.4mm.
Total length: 242mm.
Balance: on guard branch
Weight: 140g.
Scabbard: leather
Package: cardboard box with TRC knives logos, certificate of production, TRC sticker,
Notes: -TRC-S120 -
TRC Knives - South Pole - Elmax & Black Canvas Micarta - Knife
Intended use: Hiking / Sports / Survival
Type of production: Industrial
Country of production: Lithuania
Blade: full tang in Elmax 60 / 61HRC stainless steel
Blade finish: Satin finish
Handle: Black Canvas Micarta
Blade length: 115mm.
Blade thickness: 4.5mm.
Total length: 235mm.
Balancing: on the guard branch
Weight: 189g.
Sheath: in thermoformed Kydex
Packaging: box with TRC knives logos, manual with signed certificate, TRC sticker, disposable maintenance oil
Notes: each individual copy is numbered - The serial number is stamped on a knife, box and manualTRC-SOP -
TRC Knives - This is Freedom - M390 & Black Canvas Micarta - Knife
Intended use: Hunting / Fishing / Sports
Type of production: Industrial
Country of production: Lithuania
Blade: full tang stainless steel M390 60 / 61HRC
Blade finish: Satin
Handle: Black Canvas Micarta
Blade length: 118mm.
Blade thickness: 3.4mm.
Total length: 240mm.
Balancing: on the guard branch
Weight: 145g.
Sheath: in leather
Packaging: box with TRC knives logos, manual with signed certificate, TRC sticker, disposable maintenance oil
Notes: each individual copy is numbered - The serial number is stamped on a knife, box and manualTRC-TIF -
TRC Knives - Classic Freedom Knife - M390 & Black Canvas Micarta - Knife
Intended use: Hunting / Sports
Type of production: Industrial
Country of production: Lithuania
Blade: full tang in M390 stainless steel 61 / 62HRC
Blade finish: Satin
Handle: Black Canvas Micarta
Blade length: 92mm.
Blade thickness: 2.7mm.
Total length: 205mm.
Balancing: on the guard branch
Weight: 100g.
Sheath: in leather
Packaging: box with TRC knives logos, manual with signed certificate, TRC sticker, disposable maintenance oil
Notes: each individual copy is numbered - The serial number is stamped on a knife, box and manualTRC-CFR -
TRC Knives - Speed Demon - Elmax Skeletonized - Knife
Intended use: EDC / Sportivo / Neck Knife
Type of production: Industrial
Country of production: Lithuania
Blade: full tang in Elmax 60 / 61HRC stainless steel
Blade finish: Satin finish
Handle: in Elmax 60 / 61HRC stainless steel
Blade length: 80mm.
Blade thickness: 4.2mm.
Total length: 180mm.
Balancing: set back
Weight: 70g.
Sheath: in thermoformed Kydex with belt loop
Packaging: box with TRC knives logos, manual with signed certificate, TRC sticker, disposable maintenance oil
Notes: each individual copy is numbered - The serial number is stamped on a knife, box and manualTRC-SDE -
TRC Knives - K-1s Sprint Run - RWL34 & Black Canvas Micarta - Knife
Intended use: Collection / Sports
Type of production: Industrial
Country of production: Lithuania
Blade: full tang in RWL34 62HRC stainless steel
Blade finish: Apocalyptic Finish
Handle: Black Canvas Micarta
Blade length: 99mm.
Blade thickness: 3.5mm.
Total length: 214mm.
Balancing: advanced
Weight: 152g.
Sheath: in leather
Packaging: box with TRC knives logos, signed certificate, TRC sticker, disposable maintenance oil
Notes: limited edition of 150 copies - each individual copy is numbered - The serial number is stamped on a knife, box and certificateTRC-K1S -
TRC Knives - Apocalypse Knife - Elmax & Black Canvas Micarta - Knife
Intended use: Excursion / Sport / Survival
Type of production: Industrial
Country of production: Lithuania
Blade: full tang in Elmax 59 / 60HRC stainless steel
Blade finish: Satin
Handle: Black Canvas Micarta
Blade length: 172mm.
Blade thickness: 6.5mm.
Total length: 300mm.
Balancing: advanced
Weight: 398g.
Sheath: in thermoformed Kydex
Packaging: box with TRC knives logos, manual with signed certificate, TRC sticker, disposable maintenance oil
Notes: each individual copy is numbered - The serial number is stamped on a knife, box and manualTRC-APO -
Mil-Tac & Fox - Breeden Bali - FX-MTF4 knife
Mil-Tac & Fox - Breeden Bali - FX-MTF4 knife
Intended use: Tactical / Sport
Type of production: Industrial
Production Blade: Italy
Blade: Stainless steel N690Co
Treatment Blade: Titanium Nitride
Handle: Stainless steel, G10 and Micarta spacers
Blade length: 95mm.
Blade thickness: 3.5mm.
Closed Length: 134mm.
Overall length: 227mm.
Thick when closed: 19mm.
Balancing: -
Weight: 202g.
Closure: Magnetic
Clip: -
Sheath: -
Packaging: Box of aluminum with Fox logos
Note: When closed, it can be used as a sturdy crowbar - the magnets do not allow opening and closing smooth and fast as on common balisong - deign by Jason Breeden7722€72.95Out of stock -
Mil-Tac & Fox - MTF-3 Spear - coltello
Destinazione d'uso: Tattico
Tipo di produzione: Industriale
Produzione Lama: Italia
Lama: In acciaio inox N690Co 58HRC
Trattamento Lama: Teflonato
Manicatura: G10
Lunghezza lama: 100mm.
Spessore lama: 4mm.
Lunghezza chiuso: 125mm.
Lunghezza totale: 225mm.
Spessore da chiuso: 22mm.
Bilanciatura: -
Peso: 182g.
Chiusura: Liner Lock
Clip: acciaio inox
Fodero: -
Confezione: scatola in cartone con loghi Fox
Note: -7735C€112.30Out of stock -
Mil-Tac & Fox - MTF-3 Tanto - coltello
Destinazione d'uso: Tattico
Tipo di produzione: Industriale
Produzione Lama: Italia
Lama: In acciaio inox N690Co 58HRC
Trattamento Lama: Teflonato
Manicatura: G10
Lunghezza lama: 100mm.
Spessore lama: 4mm.
Lunghezza chiuso: 125mm.
Lunghezza totale: 220mm.
Spessore da chiuso: 22mm.
Bilanciatura: -
Peso: 184g.
Chiusura: Liner Lock
Clip: acciaio inox
Fodero: -
Confezione: scatola in cartone con loghi Fox
Note: -7735T€112.30Out of stock