Knives, collection knife, tactical knives, outdoor knives, pocket knives and tools
-
No brand - Pocket tactical knife vintage - knives
tactical knife made in Taiwan around the early 90's - One-handed ambidextrous opening and back lock blade. Complete with cordura sheath
Type of production: Industrial
Production Lama: Taiwan
Blade: 440 steel
Blade treatment: satin blade
Handle: kraton
Blade length: 75mm.
Blade thickness: 4mm.
Total length: 195mm.
Weight: 142g.
Sheath: in cordura
Note: -NB-1260€57.38Only 2 left -
No brand - Scout knife vintage - knives
Type of production: Industrial
Production Lama: Italy
Blade: 440A steel
Blade treatment: polished blade
Handle: plastic material
Blade length: 120mm.
Blade thickness: 2.5mm.
Total length: 240mm.
Weight: 84g.
Sheath: in leather
Note: -NB-SCOUT€15.57Only 4 left -
Conaz Consigli Scarperia - Zuava ox horn 50075 - 16cm - knife
This model represents an evolution of the traditional zuava in steel, with brass finishes, hard pressed on the plates rather than welded and pin finished on a par with rather than visible as was the case in the old construction.
Regional artisan knife produced in Scarperia, in use throughout Tuscany until the early nineteenth century.
Very robust and suitable for all jobs
Handle: ox horn
Blade: 440A Steel
Total length: 16 cm
Blade length: 7.5 cm50075 -
Boss - Folder knife by David Winch - coltello sportivo
KNIFE RETIRED FROM PRIVATE COLLECTION
* Type: Previously purchased
* Condition: Overall in very good condition
* Commercially available: No
* Sharpening: YES
* Marks on blade: No
* Marks on handle: No
* Box: wooden
* Sheath: -
* Manuals, Certificates and Warranties: -
* Checked and Certified by our internal laboratoryType of production: Industrial
Blade: 440A steel
Blade Treatment: -
Handle: G10 Black
Blade length: 80mm.
Blade thickness: 3mm.
Total length: 195mm.
Weight: 80g.
Note: -BO-DW€61.48Only 2 left -
Conaz Consigli Scarperia - Buffalo horn screed - Kilama 50159 series - knife
The Kilama series of Consigli is a modern interpretation of Italian regional knives. The materials and finishes remain the same as always, but the line has "new" shapes that reflect the classic traditional and regional Italian knives.
Intended use: sports / collection
Type of production: artisan
Lama production: Italy
Blade: X50CrMoV15 stainless steel
Blade treatment: -
Handle: Ox horn
Blade length: 80mm.
Blade thickness: 2.5mm.
Length closed: 105mm.
Total length: 185mm.
Weight: 63g.
Closing: without blade lock
Packaging: elegant box with Recommendations logos
Sheath: fabric case50159 -
Conaz Consigli Scarperia - Arbus knife - Arburese Corone Montone 20cm - 53017 - knife
Characteristic Sardinian knife, typical of the Arbus area; with blade with a characteristic bellied shape, very suitable for leather. Traditional shapes and fine finishes.
The shape reached today derives from ancient styles used in past times.
Lama production: Italy
Blade: X50CrMoV15 stainless steel
Blade treatment: -
Handle: ox wood
Blade length: 85mm.
Blade thickness: 2mm.
Length closed: 115mm.
Total length: 205mm.
Weight: 50g.
Closing: without lock
Packaging: cardboard box
Sheath: fabric caseCraftsmanship is beautiful because it is varied
The colors of the materials with which the handmade products are made may vary from those shown in the images.
Horn, wood and cornotech are raw materials that by their nature have a marked variability from one supply to another: it is the beauty of quality materials. Add craftsmanship, where the craftsman's hand never makes the same gesture: it's the beauty of craftsmanship. Combine all this and you will always have a different and unique product. It is always different from the one and unrepeatable product that we must necessarily photograph if we want you to understand what we are talking about and what we are offering you.
53017M -
Conaz Consigli Scarperia - Bergamasco knife dark ox horn - 50002 - knife
Knife without spring with a very characteristic line, representative of the peasant and pastoral civilization of the Bergamo valleys where it was made with a wooden handle. Practical and light, in its simplicity it is one of the most beautiful knives of the Italian tradition and has long been appreciated well outside its original area. It is proposed by Consiglio in a refined version, a horn tip model with a polished brass band.
Type of production: artisan
Lama production: Italy
Blade: X50CrMoV15 stainless steel
Blade treatment: -
Handle: bovine horn
Blade length: 90mm.
Blade thickness: 2.5mm.
Length closed: 110mm.
Total length: 200mm.
Weight: 70g.
Closing: without spring
Packaging: elegant box with Recommendations logos
Sheath: fabric caseCraftsmanship is beautiful because it is varied
The colors of the materials with which the handmade products are made may vary from those shown in the images.
Horn, wood and cornotech are raw materials that by their nature have a marked variability from one supply to another: it is the beauty of quality materials. Add craftsmanship, where the craftsman's hand never makes the same gesture: it's the beauty of craftsmanship. Combine all this and you will always have a different and unique product. It is always different from the one and unrepeatable product that we must necessarily photograph if we want you to understand what we are talking about and what we are offering you.
50002 -
Conaz Consigli Scarperia - Pattada Brotzu knife ox horn - 53143 - 24cm - knife
This Pattada constitutes the now historical interpretation of the Sardinian knife made by Consiglio. The handle formed by two halves fixed with a row of rivets and the absence of a real spring are typical of the original model, but the line, the shape of the surfaces, the use of bovine horn are influenced by the Scarperian tradition. Consigli has long linked its business to supplies for Sardinia, so much so that their Pattada have now become "Sardinian by adoption".
Lama production: Italy
Blade: X50CrMoV15 stainless steel
Blade treatment: -
Handle: ox horn
Blade length: 70mm.
Blade thickness: 3mm.
Length closed: 135mm.
Total length: 243mm.
Weight: 76g.
Closing: without lock
Packaging: cardboard box
Sheath: fabric caseCraftsmanship is beautiful because it is varied
The colors of the materials with which the handmade products are made may vary from those shown in the images.
Horn, wood and cornotech are raw materials that by their nature have a marked variability from one supply to another: it is the beauty of quality materials. Add craftsmanship, where the craftsman's hand never makes the same gesture: it's the beauty of craftsmanship. Combine all this and you will always have a different and unique product. It is always different from the one and unrepeatable product that we must necessarily photograph if we want you to understand what we are talking about and what we are offering you
53143 -
Mondin - 16cm cleaver with Collini blade cover - Kitchen knife
Recommended use: Processing raw meat, bone and cartilage.
Country of manufacture: Italy
Blade: Surgical steel 54-56 HRC
Handle: Non-toxic, non-deformable, impact-resistant Nylon 6/6, perfectly sterilizable up to 180°.
Blade length: 16cm.
Total length: 30cm.
Weight: 519g.
M16€20.49Only 3 left -
Denis Simonutti - Mist - Limited Edition #4 - M390 Black PVD Titanium - Craft Knife
Intended Use: Collection
Type of production: Midtech
Country of Production: Italy
Blade: Stainless steel M390 58/60HRC
Blade Treatment: PVD Blacwashed
Handle: Titanium with PVD Blacwashed treatment and bronze-colored anodized titanium spacers
Blade length: 78mm.
Blade thickness: 3mm.
Length closed: 102mm.
Total length: 180mm.
Weight: 110g.
Closure: FrameLock
Clip: Bronze-colored anodized titanium, machined from solid
Packaging: Denim pouch, warranty certificate, Velcro patch, small 6-sided playing dice
Notes: Designed and made by Denis Simonutti - Specimen number 4 of a micro-production batch of only 10 piecesDS-MIST4€0.00Only -50 leftOut of stock -
Wildrock Gear - Strikeback Tomahawk Desert Camo - D2 steel - ax
Strikeback Tomahawk is designed to work in any condition. Built and designed for heavy use, the Strikeback, thanks to its simple and clean design, manages to perfectly combine balancing and maneuverability characteristics. The body is made of high quality D2 steel and is skeletonized to help reduce weight and improve structural rigidity and balance. The Gun-kote surface coating increases its wear resistance and protects against corrosion.
Intended use: Tactical / Allround
Type of production: industrial
Blade: Bohler D2 steel (56 Hrc)
Blade treatment: Gun-kote
Lama production: Italy
Handle: G-10 Camo
Head length: 199mm.
Blade thickness: 8mm.
Blade length: 101mm.
Total length: 400mm.
Balancing: -
Weight: 1080g.
Closing: -
Clip: -
Sheath: Compatible soft Kydex sheath
Use: Cutting | Hammering | Digging | Breaking | SmashingWRK-TOM-DC€401.64Only 0 leftOut of stock -
Wildrock Gear - Strikeback Tomahawk Camo - D2 steel - ax
Strikeback Tomahawk is designed to work in any condition. Built and designed for heavy use, the Strikeback, thanks to its simple and clean design, manages to perfectly combine balancing and maneuverability characteristics. The body is made of high quality D2 steel and is skeletonized to help reduce weight and improve structural rigidity and balance. The Gun-kote surface coating increases its wear resistance and protects against corrosion.
Intended use: Tactical / Allround
Type of production: industrial
Blade: Bohler D2 steel (56 Hrc)
Blade treatment: Gun-kote
Lama production: Italy
Handle: G-10 Camo
Head length: 199mm.
Blade thickness: 8mm.
Blade length: 101mm.
Total length: 400mm.
Balancing: -
Weight: 1080g.
Closing: -
Clip: -
Sheath: Compatible soft Kydex sheath
Use: Cutting | Hammering | Digging | Breaking | SmashingWRK-TOM-C€401.64Only 0 leftOut of stock -
Hydra Armaments - Hecate knife tactical stonewashed - craft knife
Type of production: Artisan
Lama production: Italy
Blade: integral, D2 (59-61 HRC) with cryogenic treatment
Blade treatment: satin
Handle: G10 with 3D texture
Blade length: 140mm.
Blade thickness: 6mm.
Total length: 280mm.
Balancing: set back
Weight: 425g.
Sheath: Kydex with belt attachment and MOLLE clip attachment
Package: -
Notes: limited series of 40 pieces.HA-HED2SW€0.00Only -99 leftOut of stock -
Max Salice Sanna - Wave - Steel SPG2 sanmai - craft knife
Craft knife produced by the famous Master cutler Italian Salice Max Sanna.
This model called Wave, uses the Japanese steel sintered SPG2 damask laminated to 69 layers.
Intended Use: Collection / Gentleman
Type of production: Artisan
Production Lama: Italy
Blade: Stainless sintered SPG2 in DAMACO rolled 61/62 HRC
Blade treatment: -
Handle: Canvas Micarta
Blade length: 73mm.
Blade thickness: 3mm.
Closed Length: 90mm.
Overall length: 170mm.
Thick when closed: 15mm.
Balancing: -
Weight: 92g.
Lock: Liner Lock
Clip: -
Sheath: Leather
Notes: ONE PIECE - knife custom crafted by MaxFor more information you can view the site sull'accaio used: www.collinisteel.com
max-wave€0.00Only -50 leftOut of stock -
Consigli Scarperia - Roman Ring with polished horn cattle R-RMC30A - knife
Roman Ring with polished horn cattle R-RMC30A - knife
Antique knife initially in use in the Roman countryside, and then in Rome at the time of the papal city. Often, the rustic character of duels, it was designed primarily as a weapon. The blade is made of carbon steel with locking blade. The cow horn handle. Variable length. These knives are made from "Conaz" only on demand, thereby making each one as unique.
Intended Use: Collection
Type of production: craft
Blade: carbon steel
Treatment Blade: -
Production Blade: Italy
Handle: Horn Cattle Etched
Blade length: 130mm.
Blade Thickness: 2.5mm.
Closed Length: 160mm.
Overall length: 290mm.
Balancing: -
Weight: 106g.
Closure: Without Rear Blade
Clip: -
Sheath: -
Notes: -R-RMC30A -
Pattada - set of 5 knives - vintage knives
Vintage pattada set consisting of five pieces of different sizes with carbon steel blade and plastic handle.
1st - total length 34 cm - blade length 15,50 cm
2nd - total length 30 cm - blade length 14 cm
3rd - total length 27.50 cm - blade length 12 cm
4th - total length 26 cm - blade length 11.50 cm
5th - total length 23.5 cm - blade length 10.50 cmOFFERTA-54€77.87Only 0 leftOut of stock -
Yuna Knives - EQ 2 Fibra di Carbonio - coltello artigianale
Destinazione d'uso: Collezione/Sportivo
Tipo di produzione: Artigianale
Paese di produzione: Indonesia
Lama: in acciaio laminato ZDP-189 e ATS-34
Finitura lama: Satinatura
Manicatura: Titanio 6AL4V e fibra di carbonio
Lunghezza lama: 65mm.
Spessore lama: 3mm.
Lunghezza chiuso: 85mm.
Lunghezza totale: 97mm.
Spessore da chiuso: 11mm.
Peso: 62g.
Chiusura: Frame Lock
Clip: Titanio 6AL4V
Fodero: -
Confezione: -
Note: Realizzati interamente a mano da Yuna Knives9020€0.00Only -99 leftOut of stock