Knives, collection knife, tactical knives, outdoor knives, pocket knives and tools
-
Down Under Knives - The Outback Bowie Eclipse Version - DUK-EC - PRIVATE COLLECTION - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously purchased
* Condition: Overall in good condition, aesthetically marked by some oxidation marks on the blade, guard and pommel; the scabbard leather is also somewhat marked
* Commercially available: Currently in production
* Sharpening: Factory.
* Marks on blade: various oxidation marks.
* Marks on handle: None
* Box: Present and complete with accessories.
* Scabbard: Present
* Manuals, Certificates and Warranties: /
* Checked and Certified by our in-house laboratory
Intended Use: Hunting / OutdoorProduction Type: Industrial
Country of Production: Taiwan
Blade: Made of 1095 carbon steel at 58/59HRC
Blade Treatment: mirror polish
Handle: brass and leather rings
Blade length: 280mm.
Blade thickness: 6mm.
Total length: 405mm.
Weight: 800g.
Scabbard: Black leather
Packaging: cardboard box with Down Under logos, sharpening steel
Notes: the Outback is a clear homage to the knife used by Paul Hogan in the Mr. Crocodile Dundee movies, in fact it faithfully traces its shape and dimensions. - Eclipse version in carbon steel (it is recommended to keep it oiled and stored outside the leather sheath) - Previously purchased knife, from a private collectionL446228-CP -
Horl - 2 PRO - diamond and ceramic disc sharpener - Made in Germany
With HORL ® 2 Pro, Otmar and Timo Horl are making a very personal dream come true. With a high precision internal planetary gear, it triples the grinding motion generated by a simple rolling motion. Therefore, HORL ® 2 Pro sharpens at triple speed. The solid components made of stainless steel and aluminum give it a particularly noble appearance.
TWO DISCS
DIAMOND ABRASIVE The industrial diamonds used are suitable for effectively sharpening all steel for knives of any degree of hardness without water. When used correctly, the HORL ® Diamond Standard never needs to be replaced. The 46 μm grain size sharpens efficiently and precisely. In a short time, a high-quality sharpening result is achieved. The discs of the HORL ® 2 CRUISE are not replaceable
CERAMIC SANDING WHEEL After processing with HORL ® Diamond Standard, the ceramic sanding disc noticeably improves the sanding result. Only a few movements are needed for this. The result is a smooth, clean and filigree sharp knife edge.
SUPERIOR EFFICIENCY
Industrial diamonds are considered to be one of the most durable and effective abrasives on the market. Monocrystalline diamonds are harder than any knife steel. Using a galvanic process, the diamonds in the HORL ® Diamond Standard are set at approx. 55% in a nickel bed. After the first grinding processes, the initially rough surface becomes finer and HORL® Diamond Standard achieves the ideal sanding surface.
HOR-2PRO -
Horl - 2 OAK - sharpener with diamond and ceramic disc - Made in Germany
HORL ® 2 is the latest technological benchmark in the HORL ® family of sharpeners. Two sharpening angles and interchangeable grinding discs ensure greater flexibility. A completely new, play-free rolling sensation is created by the integrated ball bearings. The ceramic coating on the smoothing side guarantees impressive finishing results.
TWO DISCS
DIAMOND ABRASIVE The industrial diamonds used are suitable for effectively sharpening all steel for knives of any degree of hardness without water. When used correctly, the HORL ® Diamond Standard never needs to be replaced. The 46 μm grain size sharpens efficiently and precisely. In a short time, a high-quality sharpening result is achieved. The discs of the HORL ® 2 CRUISE are not replaceable
CERAMIC SANDING WHEEL After processing with HORL ® Diamond Standard, the ceramic sanding disc noticeably improves the sanding result. Only a few movements are needed for this. The result is a smooth, clean and filigree sharp knife edge.
SUPERIOR EFFICIENCY
Industrial diamonds are considered to be one of the most durable and effective abrasives on the market. Monocrystalline diamonds are harder than any knife steel. Using a galvanic process, the diamonds in the HORL ® Diamond Standard are set at approx. 55% in a nickel bed. After the first grinding processes, the initially rough surface becomes finer and HORL® Diamond Standard achieves the ideal sanding surface.
HOR-2QUERCIA -
Horl - 2 WALNUT - sharpener with diamond and ceramic disc - Made in Germany
HORL ® 2 is the latest technological benchmark in the HORL ® family of sharpeners. Two sharpening angles and interchangeable grinding discs ensure greater flexibility. A completely new, play-free rolling sensation is created by the integrated ball bearings. The ceramic coating on the smoothing side guarantees impressive finishing results.
TWO DISCS
DIAMOND ABRASIVE The industrial diamonds used are suitable for effectively sharpening all steel for knives of any degree of hardness without water. When used correctly, the HORL ® Diamond Standard never needs to be replaced. The 46 μm grain size sharpens efficiently and precisely. In a short time, a high-quality sharpening result is achieved. The discs of the HORL ® 2 CRUISE are not replaceable
CERAMIC SANDING WHEEL After processing with HORL ® Diamond Standard, the ceramic sanding disc noticeably improves the sanding result. Only a few movements are needed for this. The result is a smooth, clean and filigree sharp knife edge.
SUPERIOR EFFICIENCY
Industrial diamonds are considered to be one of the most durable and effective abrasives on the market. Monocrystalline diamonds are harder than any knife steel. Using a galvanic process, the diamonds in the HORL ® Diamond Standard are set at approx. 55% in a nickel bed. After the first grinding processes, the initially rough surface becomes finer and HORL® Diamond Standard achieves the ideal sanding surface.
HOR-2NOCE -
Horl - 2 CRUISE - sharpener with diamond and steel disc - Made in Germany
The HORL ® 2 CRUISE incorporates our state of the art development with a focus on the essential. A constant sharpening angle, our durable diamond coating and a beautiful "chalk" color make HORL ® 2 CRUISE an all-round talent for sharpness in any kitchen. The 20 ° sharpening angle produces fast sharpening results and a stable cutting edge with long-lasting sharpening.
TWO DISCS
DIAMOND ABRASIVE The industrial diamonds used are suitable for effectively sharpening all steel for knives of any degree of hardness without water. When used correctly, the HORL ® Diamond Standard never needs to be replaced. The 46 μm grain size sharpens efficiently and precisely. In a short time, a high-quality sharpening result is achieved. The discs of the HORL ® 2 CRUISE are not replaceable
FOR STAINLESS STEEL SANDING After the sharpening process with the diamond disc, the stainless steel sanding disc smoothes the blade and removes any burrs with the help of its integrated grooves. Only a few movements are needed. The discs of the HORL ® 2 CRUISE are not editable
SUPERIOR EFFICIENCY
Industrial diamonds are considered to be one of the most durable and effective abrasives on the market. Monocrystalline diamonds are harder than any knife steel. Using a galvanic process, the diamonds in the HORL ® Diamond Standard are set at approx. 55% in a nickel bed. After the first grinding processes, the initially rough surface becomes finer and HORL® Diamond Standard achieves the ideal sanding surface.
20 ° SHARPENING ANGLE FOR STABLE SHARPNESS
The 20 ° sharpening angle offers a new sharpness in the shortest possible time. The knife also maintains its sharpness for a long time thanks to the stable cutting edge and is suitable for the widest range of cuts in everyday life in the kitchen. Also excellent for sharpening knives for sports and outdoor use.
THE HORL ® S-PAD FOR CONTINUOUS FLEXIBILITY IN GRINDING
The combination of powerful neodymium magnets and the HORL ® S-Pad ensure that the knife is firmly fixed when sharpening. Reinforced by the non-slip effect of the S-Pad, even small blades can be sharpened correctly by adapting them to the desired height.
HOR-2CRUISE -
Horl - premium sharpening set - 3000 and 6000 stones - strop - SET - Made in Germany
Set consisting of two discs of sharpening stones with # 3000 and # 6000 grit and a leather strop to be used at the end to free the blade of all grinding residues and provide the final sharpening.
The set is designed to further refine the result of the sharpening process after using the diamond and ceramic discs, which are standard in HORL ® sharpeners.
The two discs are simply screwed onto the sharpener instead of the stock ones and are intended to refine the edge of the blade of your high-level knives. The stones can be used without water.
Compatible with HORL ® Sharpener 1. Gen, HORL ® 2 and HORL ® 2 PRO.
This item is not compatible with HORL ® 2 CRUISE.
Strop: Measurements: 25 x 5 cm - Thickness: 5mm
HOR-SET -
Horl - strip of cowhide for sharpening - strop - AL-P - Made in Germany
Original HORL ® leather made from vegetable tanned cowhide for a professional finish after sharpening. Thanks to its fine-pored surface, the blade is perfectly freed from even the finest residues on the edge after sharpening on stone.
Measurements: 25 x 5 cm - Thickness: 5mm
HOR-AL-P -
Down Under Knives - The Outback Bowie Eclipse Version - DUK-EC - Knife
ECLIPSE version, in 1095 carbon steel and sheath and handle in black leather
Intended Use: Hunting / Outdoor
Type of production: Industrial
Production Country: Taiwan
Blade: carbon steel in 1095 to 58 / 59HRC
Blade treatment: mirror polishing
Handle: brass and leather rings
Blade length: 280mm.
Blade thickness: 6mm.
Overall length: 405mm.
Weight: 800g.
Sheath: Black Leather
Packaging: cardboard box with Down Under logos, sharpening steel for sharpening
Notes: The Outback is a clear homage to the knife used by Paul Hogan in the movie Crocodile Dundee, it indeed follows closely the shape and size.L446228 -
Down Under Knives - The Arkansas Toothpick Bowie - DUK-TP - knife
Intended use: Sport / Collection
Type of production: Industrial
Blade production: Taiwan
Blade: 440C stainless steel with selective tempering
Blade treatment: -
Handle: Leather rings
Blade length: 285mm.
Blade thickness: 5.5mm.
Closed length: -
Total length: 415mm.
Thickness when closed: -
Balance: -
Weight: 630g.
Lock: -
Clip: -
Sheath: Leather
Packaging: Cardboard box with Down Under Knives logos
Notes: -L446029 -
Down Under Knives - Kookaburra Throwing Knives DUK-KB - Throwing Knives
Set of two throwing knives with sheath
Intended use: Throwing / Outdoor
Type of production: Industrial
Blade production: Taiwan
Blade: 440C stainless steel - 52HRC
Handle: Leather
Blade length: 170mm.
Blade thickness: 6mm.
Total length: 305mm.
Weight: 358g.
Sheath: Leather, crocodile-like
Packaging: Cardboard box with Down Under logosL446017 -
Down Under Knives - Red Rock Raptor Kukri Machete - L446026 - knife
Intended use: Kukri/Heavy Utility
Type of production: Industrial
Blade production: Taiwan
Blade: 440C stainless steel with differential tempering 59/46HRC
Blade Treatment: Mirror polishing
Handle: Brass and leather rings
Blade length: 260mm.
Blade thickness: 5.5mm.
Total length: 395mm.
Weight: 690g.
Sheath: Leather, reptile-likePackaging: Cardboard box with Down Under logos and warranty certificates
L446026 -
Down Under Knives - The Outback Bowie - knife - L446028
Intended use: Hunting / Outdoor
Type of production: Industrial
Production Blade: Taiwan
Blade: 440C stainless steel hardened differentiated 58/45HRC
Treatment Blade: Mirror polishing
Handle: Brass, ebony wood and leather rings
Blade length: 280mm.
Blade thickness: 6mm.
Total length: 405mm.
Weight: 800g.
Sheath: In leather, crocodile-like
Packaging: cardboard box with logos Down Under, sharpener for sharpening
Notes: The outback is a clear homage to the knife used by Paul Hogan in Crocodile Dundee movie, in fact faithfully reproduces the shape, size and material as the one used for filming.L446128 -
Forge de Laguiole - Philippe Starck - Jojo long legs - coltello formaggio - fuori produzione
Laguiole en Aubrac - Philippe Starck - Jojo long legs - coltello formaggio All'inizio degli anni '80, nel villaggio di Laguiole in Aubrac, l'arte della coltelleria di Laguiole era scomparsa... Nel 1987 la fabbrica Forge de Laguiole rilancia la produzione di mitici coltelli nel suo villaggio d'origine, rispettando l'eredità dell'arte della tradizione. È la rinascita di un coltello cult, referenza del design, sinonimo di qualità e arte di vivere. Ogni coltello è un pezzo unico che può richiedere diversi giorni di produzione! Un solo coltellinaio altamente qualificato realizza, in più di 40 fasi, un coltello d'eccezione, che durerà una vita. Tra tradizione e creazione, Forge de Laguiole apporta un tocco di innovazione, rivolgendosi ai più grandi designer. Questo splendido coltello da formaggio firmato Philippe Starck ha un elegante manico in bachelite nera Presentato all'esposizione universale di Siviglia nel 1992, ha permesso a Forge de Laguiole di ricevere il premio del Design Europeo.
Elegante, le sue linee inimitabili ed essenziali ne fanno un vero capolavoro d'equilibrio ed estetica. La forma del manico è stata semplicemente studiata perchè il coltello possa rimanere in equilibrio sul suo bordo. Philipe Starck, architetto e designer francese ha partecipato al progetto della Forge de Laguiole fin dall'inizio delle sue avvenure. Dopo aver ideato nel 1987 l'edificio della Forge de Laguiole ha ideato i primi negozi del marchio; così, sarà dunque anche il primo a ripensare il coltello di Laguiole. Caratteristiche:
Colore : nero Materiale : Acciaio inossidabile - Bachelite Dimensioni : Lunghezza totale: 30 cm - Lama: lunghezza 15 cm Origini: Coltello originale Laguiole interamente prodotto a Laguiole in Aveyron (più di 40 fasi successive sono necessarie alla sua realizzazione)5551S -
Down Under Knives - Walkabout Bowie - knife - L446021
Down Under Knives - Walkabout Bowie - knife - L446021
Intended Use: Hunting / Outdoor
Type of production: Industrial
Production Lama: Taiwan
Blade: Stainless steel 440C Differentiated hardening 58 / 45HRC
Lama treatment: Mirror polishing
Handle: brass, ebony wood and leather rings
Blade length: 195mm.
Blade thickness: 6mm.
Overall length: 325mm.
Weight: 566g.
Sheath: Leather
Packaging: cardboard box with logos Down Under, sharpening steel for sharpening
Notes:L446021 -
Down Under Knives - The Mistress Bowie - knife
Intended Use: Sport / Collection
Type of production: Industrial
Production Blade: Taiwan
Blade: 440C stainless steel hardened selective
Treatment Blade: -
Handle material: Leather Rings
Blade length: 329mm.
Blade thickness: 5.5mm.
Length closed: -
Overall length: 450mm.
Thick when closed: -
Balancing: -
Weight: 832g.
Closure: -
Clip: -
Sheath: Leather
Packaging: Cardboard box with logos Down Under Knives
Notes: -L446033 -
Down Under Knives - The Bushmate - knife
Intended Use: Light Utility
Type of production: Industrial
Blade: 440C stainless steel hardened differentiated 59/46HRC
Treatment Blade: Mirror polishing
Handle: Brass rings and leather
Blade length: 100mm.
Blade thickness: 5.5mm.
Total length: 270mm.
Weight: 360g.
Sheath: In leather, with bone inserts
Packaging: cardboard box with logos Down Under and warranty certificatesL446010 -
Down Under Knives - The Razorback knife - L446018 - DUK-RB - knife
Intended use: Heavy Utility
Type of production: Industrial
Blade: 440C stainless steel with differential hardening 59/46HRC
Blade Treatment: Mirror polish
Handle: Brass and leather rings
Blade length: 180mm.
Blade thickness: 5.5mm.
Total length: 307mm.
Weight: 465g.
Sheath: Leather, with bone inserts
Packaging: Cardboard box with Down Under logos and warranty certificatesL446018 -
Forge de Laguiole - Munoz Caballero Corno con blocco lama - coltello collezione
Coltello realizzato dal famoso Virgilio Munoz Caballero. Questo artigiano è stato insignito nel 1986 del titolo di Migliore Operario Francese nella categoria dei coltelli da collezione.
Dal 1984 collabora con Forge de Laguiole realizzando pezzi d'eccezione con uno stile personale che associa precisione e tecnica alla finezza delle decorazioni e incisioni.
Lama: in acciaio inox 12C27
Manicatura: corno
Lunghezza lama: 90 mm.
Spessore della lama: 3 mm.
Lunghezza totale: 220 mm.
Peso: 108 g.
Cartelle: Acciaio Inox lucido
Testine: Acciaio Inox lucido
Chiusura: Molla di ritenzione in acciaio Inox lucido
note: uno dei pochi Laguiole con il blocco lama2891 -
Forge de Laguiole - Radica di Ginepro - coltello collezione
Destinazione d'uso: Collezione
Lama: in acciaio inox 12C27
Produzione Lama Laguiole, Francia
Manicatura: Radica
Lunghezza lama: 85mm.
Spessore della lama: 3mm.
Lunghezza chiuso: 110mm.
Lunghezza totale: 205mm.
Bilanciatura: -
Peso: 56g.
Chiusura: Molla di ritenzione
Clip: -
Fodero: -
Note: -2491 -
Forge de Laguiole - Yan Pennor collection - corian bianco - coltello
Creato dal disegnatore Yan Pennor questo coltello ha ottenuto il premio "French Grand Prize"
Lama: in acciaio inox 12C27
Manicatura: corian bianco
Lunghezza lama: 90 mm.
Spessore della lama: 3 mm.
Lunghezza totale: 205 mm.
Peso: 80 g.
Cartelle: Acciaio Inox lucido
Chiusura: Molla di ritenzione in acciaio Inox lucido
Clip: Assente
Fodero: Assente
scatola regalo2892 -
Forge de Laguiole - Yan Pennor collection - fibra di carbonio - coltello
Creato dal disegnatore Yan Pennor questo coltello ha ottenuto il premio "French Grand Prize"
Lama: in acciaio inox 12C27
Manicatura: fibre di carbonio
Lunghezza lama: 90 mm.
Spessore della lama: 3 mm.
Lunghezza totale: 205 mm.
Peso: 80 g.
Cartelle: Acciaio Inox lucido
Chiusura: Molla di ritenzione in acciaio Inox lucido
Clip: Assente
Fodero: Assente
scatola regaloserie numerata2894 -
Forge de Laguiole - Yan Pennor collection knife - corno - coltello collezione
Creato dal disegnatore Yan Pennor questo coltello ha ottenuto il premio "French Grand Prize"
Lama: in acciaio inox 12C27
Manicatura: corno
Lunghezza lama: 90 mm.
Spessore della lama: 3 mm.
Lunghezza totale: 205 mm.
Peso: 80 g.
Cartelle: Acciaio Inox lucido
Chiusura: Molla di ritenzione in acciaio Inox lucido
Clip: Assente
Fodero: Assente
scatola regaloserie numerata2893