Knives, collection knife, tactical knives, outdoor knives, pocket knives and tools
-
Ontario Knife Company - Spec Plus SP-2 Survival Knife - 8680 - knife
Intended Use: Survival / Tactical / Military
Production Type: Industrial
Country of Production: USA
Blade: 1075 carbon steel hidden tang
Blade treatment: Powder coating
Handle: kraton
Blade length: 140mm.
Blade thickness: 4.5mm.
Total length: 269mm.
Balancing: advanced
Weight: 255g.
Scabbard: Belt, nylon, for vertical carrying.
Packaging: Cardboard box with OKC logos
Notes: -ON8680 -
Ontario Knife Company - Bob Dozier Arrow Folder - 9100 - knife
Intended use: Tactical / EDC
Type of production: Industrial
Country of production: Taiwan
Blade: in steel tool D2
Blade treatment: Stonewashed
Handle: G10
Blade length: 92mm.
Blade thickness: 3mm.
Length closed: 115mm.
Total length: 207mm.
Thick when closed: 11.7mm.
Weight: 85g.
Opening: through thumbstood, from right-handed
Washers: teflon
Closure: liner lock
Clip: stainless steel, removable
Packaging: Cardboard box with Ontario Knife Company logos
Notes: Design by Bob DozierON9100 -
Ontario Knife Company - Hunt Plus Skinner - 9716 - knife
Intended use: Hunting / Hiking
Type of production: Industrial
Country of production: USA
Blade: full tang in 440B stainless steel
Blade treatment: satin finish
Handle: in kraton
Blade length: 110mm.
Blade thickness: 4.7mm.
Total length: 230mm.
Balancing: slightly advanced
Weight: 160g.
Sheath: nylon, belt, vertical port
Packaging: Cardboard box with OKC logos
Note: -ON9716 -
Ontario / Utilitac II - JPT-3S Drop by Joe Pardue - PRIVATE COLLECTION - knife
KNIFE RETIRED FROM PRIVATE COLLECTION
* Provenance: Collected by a private individual, previously purchased
* Condition: Overall in very good condition
* Commercially available: Discontinued
* Sharpness: Factory
* Marks on blade: NO
* Marks on handle: NO
* Box: -
* Sheath: /
* Manuals, Certificates and Warranties: -
* Checked and Certified by our internal laboratoryIntended use: Sports / EDC
Type of production: Industrial
Blade production: Taiwan
Blade: AUS-8 58HRC stainless steel
Blade Treatment: -
Handle: Zytel
Blade length: 85mm.
Blade thickness: 3mm.
Closed length: 120mm.
Total length: 205mm.
Closed thickness: 14mm.
Balancing: -
Weight: 152g.
Closure: Liner Lock
Clip: stainless steel
Sheath: -
Packaging: -
Notes: Design by Joe PardueAP-2798 -
Ontario Knife Company - Spec Plus SP-1 Combat Knife - 8679 - tactical knife
Intended Use: Tactical / Military
Production type: Industrial
Country of Production: USA
Blade: hidden tang in 1075 carbon steel
Blade treatment: powder coating
Handle: kraton
Blade length: 178mm.
Blade thickness: 4.5mm.
Total length: 308mm.
Balancing: advanced
Weight: 286g.
Scabbard: Belt, nylon, for vertical carrying.
Package: Cardboard box with OKC logos
Notes: -ON8679 -
Ontario Knife Company - MOD Mark 3 Navy Dive Knife - 6141 - knife
Intended Use: Multirole / Tactical
Production type: Industrial
Country of Production: USA
Blade: hidden tang in 1095 carbon steel
Blade treatment: Phosphated
Handle: Thermoplastic, with steel tang and guard
Blade length: 152mm.
Blade thickness: 4mm.
Total length: 282mm.
Balance: backward
Weight: 294g.
Scabbard: thermoplastic, with steel inner lock and Cordura back loop.
Package: Cardboard box with OKC logos
Notes: Knife produced and used for many decades by the U.S. naval forces.ON6141 -
Ontario Knife Company - Spec Plus SP-6 Fighting Knife - 8682 - tactical knife
Intended use: Tactical / Military
Type of production: Industrial
Country of production: USA
Blade: 1095 carbon steel hidden tang
Blade treatment: epoxy powders
Handle: in kraton
Blade length: 200mm.
Blade thickness: 5mm.
Total length: 330mm.
Balancing: on the guard branch
Weight: 323g.
Sheath: belt, in cordura and leather, vertical carry
Packaging: Cardboard box with OKC logos
Note: -ON8682 -
Ontario Knife Company - SP53 Bolo Knife - 8689 - knife
Designed by Dan Maragni, the Ontario SP53 Bolo Knife features a 25cm bolo-style blade made of 5160 steel with an epoxy powder coating. The Bolo SP53 knife comes complete with a MOLLE compatible black tactical sheath and is made in the USA.
Intended use: Hard Utility / Survival
Type of production: Industrial
Country of production: USA
Blade: full tang in 5160 Carbon Steel
Blade treatment: epoxy powders
Handle: in kraton
Blade length: 257mm.
Blade thickness: 6.4mm.
Total length: 384mm.
Balancing: advanced
Weight: 940g.
Sheath: nylon, M.O.L.L.E.compatible, with rigid polypropylene insert
Packaging: Cardboard box with OKC logos
Note: -ON8689 -
Ontario Knife Company - SP24 USN-1 Survival Knife - 8688 - knife
The SP24 USN-1 survival knife is one of Ontario Knife Company's Spec Plus series models. Designed for military use but practical enough as a survival knife, camping knife or even hunting knife. In addition to the serrations on both sides, there is also a rope cutter on the blade of the knife. As with all Spec Plus, the SP24 USN-1 survival knife is made in the United States.
Intended use: Tactical / MilitaryType of production: Industrial
Country of production: USA
Blade: 1075 carbon steel hidden tang
Blade treatment: Powder Coat
Handle: in kraton, with steel tang
Blade length: 127mm.
Blade thickness: 4.8mm.
Total length: 245mm.
Balancing: 3cm back
Weight: 225g.
Sheath: nylon, modular, compatible with M.O.L.L.E.
Packaging: Cardboard box with OKC logos
Note:ON8688 -
Ontario Knife Company - Spec Plus SP5 Bowie Survival - 8681 - knife
Intended use: Hard Utility / Survival
Type of production: Industrial
Country of production: USA
Blade: full tang in 1095 carbon steel
Blade treatment: epoxy powders
Handle: in kraton
Blade length: 250mm.
Blade thickness: 6mm.
Total length: 380mm.
Balancing: advanced
Weight: 425g.
Sheath: nylon, M.O.L.L.E.compatible, with rigid polypropylene insert
Packaging: Cardboard box with OKC logos
Note: -ON8681 -
Ontario Knife Company - Bob Dozier Black Arrow Folder knife - 9101 - knife
Intended use: Tactical / EDC
Type of production: Industrial
Country of production: Taiwan
Blade: in tool steel D2
Blade treatment: Black
Handle: G10
Blade length: 92mm.
Blade thickness: 3mm.
Closed length: 115mm.
Total length: 207mm.
Thick when closed: 11.7mm.
Weight: 85g.
Opening: by thumbstood, by right-handed
Washers: teflon
Closure: liner lock
Clip: in stainless steel, removable
Packaging: Cardboard box with Ontario Knife Company logos
Notes: Design by Bob DozierO9101 -
Ontario Knife Company - Hunt Plus Drop Point - 9715 - knife
Intended use: Hunting / Hiking
Type of production: Industrial
Country of production: USA
Blade: full tang in 440B stainless steel
Blade treatment: satin finish
Handle: in kraton
Blade length: 110mm.
Blade thickness: 4.7mm.
Total length: 230mm.
Balancing: slightly advanced
Weight: 160g.
Sheath: nylon, belt, vertical port
Packaging: Cardboard box with OKC logos
Note: -ON9715 -
Ontario Knife Company - Spec Plus Alpha Survival - 9710 - knife
Intended use: Tactical / Military
Type of production: Industrial
Country of production: USA
Blade: full tang in 1095 carbon steel
Blade treatment: phosphated
Handle: in kraton
Blade length: 135mm.
Blade thickness: 4.7mm.
Total length: 260mm.
Balancing: slightly advanced
Weight: 184g.
Sheath: nylon, belt, vertical port
Packaging: Cardboard box with OKC logos
Note: -ON9710 -
Ontario Knife Company - FF6 Freedom Fighter - 8106 - knife
Intended use: Tactical / Military
Type of production: Industrial
Country of production: USA
Blade: 1095 carbon steel hidden tang
Blade treatment: epoxy powders
Handle: in kraton, with tang and steel guard
Blade length: 200mm.
Blade thickness: 5mm.
Total length: 330mm.
Balancing: on the guard branch
Weight: 368g.
Sheath: belt, in cordura and leather, vertical port
Packaging: Cardboard box with OKC logos
Note: -ON8106 -
Ontario Knife Company - SP10 Raider Bowie - 8684 - knife
Intended use: Hard Utility / Survival
Type of production: Industrial
Country of production: USA
Blade: full tang in 1095 carbon steel
Blade treatment: epoxy powders
Handle: in kraton with steel guard
Blade length: 245mm.
Blade thickness: 6.8mm.
Total length: 380mm.
Balancing: advanced
Weight: 620g.
Sheath: nylon, M.O.L.L.E compatible, with rigid polypropylene insert
Packaging: Cardboard box with OKC logos
Note: -ON8684 -
Ontario Knife Company - ASEK Survival System - 1400 - knife
ASEK KNIFE
Intended use: Tactical / Military
Type of production: Industrial
Country of production: USA
Blade: 1095 carbon steel hidden tang
Blade treatment: Phosphated
Handle: in kraton, with tang and steel guard
Blade length: 127mm.
Blade thickness: 4.8mm.
Total length: 270mm.
Balancing: set back
Weight: 266g.
Sheath: nylon, modular, M.O.L.L.E compatible, with polypropylene interior and special compartment for the ASK Tool
Packaging: Cardboard box with OKC logos
Note: The survival system consists of a knife and an Asek Rescue Tool emergency toolASEK RESCUE TOOL
Blades: 420j2B stainless steel, HRC 54-56 hardness
Handle: aluminum
Total length: 170 mm
Notes: also equipped with a screwdriver / prybar and ceramic sharpenerON1400 -
Ontario Knife Company - SP8 Survival Machete - 8683 - knife
Intended use: Hard Utility / Survival
Type of production: Industrial
Country of production: USA
Blade: full tang in 1095 carbon steel
Blade treatment: epoxy powders
Handle: in kraton
Blade length: 255mm.
Blade thickness: 6.5mm.
Total length: 385mm.
Balancing: advanced
Weight: 642g.
Sheath: nylon, M.O.L.L.E compatible, with rigid polypropylene insert
Packaging: Cardboard box with Ontario Knife Company logos
Note: -ON8683 -
Ontario Knife Company - Chimera Plain Edge - 6517 - knife
Intended use: Tactical / Military
Type of production: Industrial
Country of production: USA
Blade: 1095 carbon steel hidden tang
Blade treatment: Phosphated
Handle: in rubber, with tang and steel guard
Blade length: 200mm.
Blade thickness: 5.2mm.
Total length: 345mm.
Balancing: set back
Weight: 424g.
Sheath: in polypropylene, modular, compatible with M.O.L.L.E., with integrated ceramic sharpener
Packaging: Cardboard box with OKC logos
Note: -ON6517 -
Microtech - DOC Black Carbon Fiber - Death on Contact - 153-1T - knife
Microtech DOC Black - Death on Contact - Flipper Knife - Knife
Intended use: Tactical / Collection
Type of production: Industrial
Production Lama USA
Blade: Stainless steel 154CM
Treatment Blade: Black Coating
Handle: Aluminum 6061T6 Aeronautics and Carbon Fiber
Blade length: 80mm.
Blade thickness: 4mm.
Closed Length: 135mm.
Overall length: 230mm.
Thick when closed: -
Balancing: -
Weight: 204g.
Lock: Frame Lock
Clip: Stainless Steel
Sheath: Nylon
Packaging: Cardboard box with logos Microtech
Design: Mick Strider and Anthony MarfioneMCT1531T -
Microtech - Metalmark - Satin Standard - 170-4
The Metalmark from Microtech has uniquely shaped handles that open to reveal a blade shape that simply flows. The channel handles are aluminum, black anodized with Torx pivot screw adjustment and a spring loaded latch. The blade is Elmax steel with a satin finish. The build on the Metalmark balisong is solid. Specifications: Overall Length: 9.125" Blade Length: 3.875" Blade Steel: Elmax Handle Material: 6061-T6 Aluminum Closed Length: 5.25" Weight: 4.8 oz.10050 -
Microtech - Socom Delta - Tanto full Serrated - Black G-10 - 163-12 - coltello
The Microtech Socom Delta knife is the next generation of this classic folder and the winner of the "American Made Knife of the Year" at the 2012 BLADE Show. The Socom Delta features Microtech's titanium sub-lock tab and G10 composite handles, 3D machined with a subtle yet effective texture. The handle has bead blast finished hardware, pocket clip and a titanium back-strap with lanyard hole. Torx T30 pivot adjustment screw. This Socom Delta has a Tanto blade of S35VN steel with a bead blast finish and a partially serrated edge. The blade is deployed with ambidextrous thumb studs. The fit and finish of the Socom Delta Tanto is excellent, just as you'd expect from Microtech. Specifications: Overall Length: 9" Blade Length: 4" Cutting Edge: 3.75" Blade Steel: S35VN Blade Finish: Bead Blast Blade Edge: Partially Serrated Handle Material: Black G10 Closed Length: 5" Weight: 4.6 oz. Made in the USA10043 -
Microtech - Select Black Fire - Carbon Fiber Inserts - knife
Microtech's Select-Fire is their 2011 offering in the D/A (Dual Action) market. While there are numerous Dual Action offerings among manufacturers, this design won the Most Innovative award at the 2011 Blade Show. This model features a button for automatic deployment of the side opening blade, a large liner lock, oversized thumb stud for manual deployement, index choil for higher grip allowing precision cutting, anti-slip thumb grooves, and a pocket clip. Microtech's Select-Fire comes with a tool to lock the knife's automatic capability rendering it a manual only operating knife.
Dimensions
Blade Steel: Sheath: S35-VN
Blade Length: 3.73 inches
Overall Length: 8.9 inches (approx)
Handle Material: 6061-T6 AL w/ CF inlays
Glassbreaker: Tip-Up
Pocket Clip: Yes5656B -
Microtech - SF M / A Stone Washed - knife
Microtech - SF M / A Stone Washed - knife
Type of production: Industrial
Production Lama USA
Blade: stainless steel CPM-S35VN
Blade treatment: Stone Washed
Handle: Aluminium 6061T6 Aviation and Carbon Fiber
Blade length: 95mm.
Blade thickness: 4mm.
Closed Length: 140mm.
Overall length: 225mm.
Thick when closed: -
Balancing: -
Weight: 145g.
Lock: Liner Lock
Clip: Stainless Steel
Sheath: Nylon
Packaging: Cardboard box with Microtech logos
Notes: Awarded to Blade Awards 2011 as the most Innovative Design5656S -
Microtech - Socom Elite Black - 160-1 - coltello
I coltelli della serie Elite Socom vengono ritenuti dalla Microtech il loro più alto standard qualitativo per impiego tattico.
Prodotto per la prima volta nel 1996, negli anni sono state apportate numerose migliorie per rendere il coltello sempre più adattabile ai diversi scenari di utilizzo.
Destinazione d'uso: tattico / collezione
Tipo di produzione: Industriale
Produzione Lama: Usa
Lama: in acciaio CPM-S35VN
Manicatura: Alluminio aueronautico 6061T6 e fibra di carbonio
Lunghezza lama: 105mm.
Spessore lama: 4,5mm.
Lunghezza chiuso: 132mm.
Lunghezza totale: 232mm.
Spessore da chiuso: 20mm.
Peso: 126g.
Chiusura: Liner Lock
Clip: in acciaio
Fodero: in cordura
Confezione: in cartone, con loghi Microtech
Note: -5654 -
Microtech - Socom Elite Satin Serrated - 160-05 - coltello
I coltelli della serie Elite Socom vengono ritenuti dalla Microtech il loro più alto standard qualitativo per impiego tattico.
Prodotto per la prima volta nel 1996, negli anni sono state apportate numerose migliorie per rendere il coltello sempre più adattabile ai diversi scenari di utilizzo.
Destinazione d'uso: tattico / collezione
Tipo di produzione: Industriale
Produzione Lama: Usa
Lama: in acciaio inox CPM-20CV
Manicatura: Alluminio aueronautico 6061T6 ed inserti antiscivolo
Lunghezza lama: 105mm.
Spessore lama: 4,5mm.
Lunghezza chiuso: 132mm.
Lunghezza totale: 232mm.
Spessore da chiuso: 20mm.
Peso: 126g.
Chiusura: Liner Lock
Clip: in acciaio
Fodero: in cordura
Confezione: in cartone, con loghi Microtech
Note: -5653 -
Ontario / Utilitac II - JPT-4R Tanto by Joe Pardue - coltello
Destinazione d'uso: Sportivo / EDC
Tipo di produzione: Industriale
Produzione Lama: Taiwan
Lama: In acciaio inox AUS-8 58HRC
Trattamento Lama: -
Manicatura: Zytel
Lunghezza lama: 85mm.
Spessore lama: 3mm.
Lunghezza chiuso: 120mm.
Lunghezza totale: 200mm.
Spessore da chiuso: 14mm.
Bilanciatura: -
Peso: 158g.
Chiusura: Liner Lock
Clip: in acciaio inox
Fodero: -
Confezione: scatola in cartone con loghi Utilitac II
Note: Design by Joe Pardue2797 -
Ontario Knife Company - 498 Marine Combat knife - knife
This knife is used exclusively by the United States Marine Corps and has been manufactured by the Ontario Knife Company for many years now.
Intended use: military / collection
Type of production: Industrial
Production Lama: America
Blade: 1095C carbon steel
Blade treatment: Phosphates
Handle: Painted leather rings
Blade length: 180mm.
Blade thickness: 4mm.
Closed Length: -
Total length: 305mm.
Thick when closed: -
Balance: set back, at 1cm.
Weight: 284g.
Closing: -
Clip: -
Sheath: Black Leather
Packaging: transparent plastic bag
Note: -ON498 -
Ontario Knife Company - ASEK Rescue Strap Cutter Assembly - 1403 - multipurpose
Originally produced as an accessory to the ASEK survival knife series, this ASEK belt cutter is constructed of anodized aluminum. The ASEK Strap Cutter can also be considered a multi-tool thanks to the ceramic sharpener, the lanyard and the presence of a screwdriver. Click here for replacement blades for the ASEK Belt Cutter. The ASEK cutter blades are made in the USA.
Total length: 16.8 cm
Hardness: 55 HRC
Handle color black
Black blade color
Blade thickness: 0.064 cm
Blade material: 440 stainless steel
Blade length: 2.5 cmON1403