Knives, collection knife, tactical knives, outdoor knives, pocket knives and tools
-
Lurisinga - Gallurese Razor Blade - Traditional Gallura Knife - Handcrafted Knife
The "Lurisinca," a traditional knife from Luras in Gallura, owes its name to the Lurese term for a local woman, reflecting the feminine nature of the "razor blade" used. The Gallurese Razor Blade, a typical Sardinian knife resembling a point-less shaving razor, was essential in cork processing, especially for making "quadretti," precursors to cork stoppers. However, this practice has declined due to the economic crisis, forcing many craftsmen to close their shops. The Gallurese Razor Blade, versatile and always at hand, represented an indispensable tool for every daily need.
Type of Production: Handcrafted
Blade Production: Italy
Blade: Stainless steel
Handle: Bovine horn tip
Blade Length: 80mm.
Blade Thickness: 2mm.
Closed Length: 90mm.
Total Length: 185mm.
Weight: 65g.
Lock: No blade lock
Packaging: Cardboard boxLU-GAL€77.87Only 2 left -
Indiana - Miniature knife - Bowie Sitting Bull Black - Blade 5.5 cm - collection knife
Intended use: Collection / Keychain
Type of production: semi-artisanal
Blade: 420 stainless steel
Production Lama: Italy
Handle: brass with unscrewable rear cap
Blade length: 60mm.
Blade thickness: 2mm.
Total length: 94mm.
Balancing: -
Weight: 14g.
Sheath: vinyl sheath
Notes: engraved bladeIN-MIN-B-TSB€23.77Only 1 left -
Indiana - Miniature knife - Bowie Bison - Blade 5.5 cm - collection knife
Intended use: Collection / Keychain
Type of production: semi-artisanal
Blade: 420 stainless steel
Production Lama: Italy
Handle: brass with unscrewable rear cap
Blade length: 60mm.
Blade thickness: 2mm.
Total length: 94mm.
Balancing: -
Weight: 14g.
Sheath: vinyl sheath
Notes: engraved bladeIN-MIN-B-BI€23.77Only 2 left -
Indiana - Miniature knife - Bowie Survival - Blade 5.5 cm - collection knife
Intended use: Collection / Keychain
Type of production: semi-artisanal
Blade: 420 stainless steel
Production Lama: Italy
Handle: brass with unscrewable rear cap
Blade length: 60mm.
Blade thickness: 2mm.
Total length: 94mm.
Balancing: -
Weight: 14g.
Sheath: vinyl sheath
Notes: engraved bladeIN-MIN-B-S€23.77Only 2 left -
Indiana - Miniature knife - Sitting Bull Bowie - Blade 5.5 cm - collection knife
Intended use: Collection / Keychain
Type of production: semi-artisanal
Blade: 420 stainless steel
Production Lama: Italy
Handle: brass with unscrewable rear cap
Blade length: 60mm.
Blade thickness: 2mm.
Total length: 94mm.
Balancing: -
Weight: 14g.
Sheath: vinyl sheath
Notes: engraved bladeIN-MIN-B-TS€23.77Only 4 left -
No brand - Pocket tactical knife vintage - knives
tactical knife made in Taiwan around the early 90's - One-handed ambidextrous opening and back lock blade. Complete with cordura sheath
Type of production: Industrial
Production Lama: Taiwan
Blade: 440 steel
Blade treatment: satin blade
Handle: kraton
Blade length: 75mm.
Blade thickness: 4mm.
Total length: 195mm.
Weight: 142g.
Sheath: in cordura
Note: -NB-1260€57.38Only 2 left -
Roncola gardening made in Italy - steel blade
Robust hatchet work, perfect for gardening or work in the country.
Production Lama: Italy
Blade: stainless steel curve
Handle: Wood
Blade length: 75mm.
Blade Thickness: 3.5 mm.
Closed Length: 115mm.
Thick when closed: 26mm.
Overall length: 195mm.
Weight: 145g.
Closing: bladeless blockron-1€28.69Only 2 left -
Boss - Folder knife by David Winch - coltello sportivo
KNIFE RETIRED FROM PRIVATE COLLECTION
* Type: Previously purchased
* Condition: Overall in very good condition
* Commercially available: No
* Sharpening: YES
* Marks on blade: No
* Marks on handle: No
* Box: wooden
* Sheath: -
* Manuals, Certificates and Warranties: -
* Checked and Certified by our internal laboratoryType of production: Industrial
Blade: 440A steel
Blade Treatment: -
Handle: G10 Black
Blade length: 80mm.
Blade thickness: 3mm.
Total length: 195mm.
Weight: 80g.
Note: -BO-DW€61.48Only 2 left -
Condor - Ascia integrale - coltello
Produttore: Condor - Italy
lunghezza totale: 30 cm
lunghezza lama: 9,5 cm
lunghezza manico: 11,5 cm
peso: 697 gr
tipo acciaio: 420 inox
materiale impugnatura: micarta
note: fodero in cuoio7202€49.18Only 2 left -
Hubertus Solingen - Outdoor knife - Vintage - sports knife
Type of production: industrial
Blade: 440 stainless steel
Blade treatment: -
Blade production: -
Handle: aluminum
Blade length: 11mm.
Blade thickness: 4.5mm.
Closed Length: -
Total length: 225mm.
Balancing: -
Weight: 144g.
Closure:
Clip: -
Sheath: in leather
Note: -HS-V-OUT€45.08Only 2 left -
Wander Tactical - Barracuda Tanto Compound Knife - Raw & Black Micarta - Custom Knife
Use: EDC / Light Utility / All Round
Type of Production: Handcrafted
Country of Production: Italy
Blade: Integral, D2 steel at 59/61HRC
Blade Treatment: -
Handle: Micarta
Blade Length: 100mm
Blade Thickness: 5mm
Total Length: 205mm
Balance: Rearward
Weight: 214g
Sheath: Thermoformed Kydex, with tek-lok attachment
Package: -
Notes: Each knife is unique and handcrafted; there may be slight differences in finishes, colors, and materials compared to the photographed productWT-BARRT-B -
Wander Tactical - Barracuda knife - Raw & Black Micarta - custom knife
Use: EDC / Light Utility / All Round
Type of production: Artisan
Country of production: Italy
Blade: integral, in D2 steel at 59 / 61HRC
Blade treatment: -
Handle: Micarta
Blade length: 100mm.
Blade thickness: 5mm.
Total length: 205mm.
Balancing: set back
Weight: 204g.
Sheath: in Kydex, thermoformed, with tek-lok type attachment
Packaging: -
Notes: Each knife is unique and handcrafted; there may be slight differences in finishes, colors and materials compared to the photographed productWT-BARR-BL -
Artigiano Scarperia - Love Knife Fusetto in Deer - hand-engraved - handmade knife
In some areas of central and southern Italy, it was customary to give knives as engagement or wedding gifts, assigning the knife the task of sanctioning the love bond.
There was a strong identification between man and knife: the lover who gave such a gift to the woman symbolically offered himself, while the gift given to the man could be interpreted as an exhortation to virile valor.
Some specimens of this historical knife also served as protection against the evil eye, featuring the characteristic “dice eyes” on the handle, while the blades were traditionally engraved with decorative and symbolic elements.
The love knives were also indicative of the social class of the family: less wealthy couples, unable to afford very elaborate knives, sanctioned their love with simpler, less worked, and less expensive objects, but identical in values and meanings.
Type of production: artisanal
Blade production: Italy
Blade: Stainless steel C70
Blade treatment: -
Handle: Deer horn with buffalo horn inserts and silver plaque
Blade length: 82mm.
Blade thickness: 2mm.
Closed length: 100mm.
Total length: 183mm.
Weight: 54g.
Closure: without blade lock
Packaging: cardboard packaging with certificatesThe brand Artigiano Scarperia was established in 2007 by two expert knife makers, Fabio Gasparrini and Alessandro Conti. Drawing inspiration from ancient art, they create refined cutlery for the kitchen and table, assortments of personal care items and office supplies, as well as various objects in horn and wood. All products are handcrafted, using traditional techniques without the use of machinery.
For this reason, any variations in material and workmanship are not considered flaws, but distinctive features of a unique product, handcrafted and of high quality.
AP-CAFB€0.00Only -50 leftOut of stock -
Treeman Knives - Recon Hunter Knife - Green G-10 - PRIVATE COLLECTION - knife
KNIFE FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Overall in very good condition
* Commercially available: No longer in production
* Sharpening: Factory
* Marks on blade: No
* Marks on handle: No
* Box: Not present
* Scabbard: In Kydex
* Manuals, Certificates and Warranties: NO
* Checked and certified by our internal laboratoryIntended Use: Tactical/Collection
Production Type: Semi-Industrial
Country of manufacture: USA
Blade: Carbon steel O1
Blade treatment: Grey Cerakote
Handle: G-10 Green
Blade length: 110mm. (100m. cutting edge)
Blade thickness: 4.6mm.
Total length: 230mm.
Balance: set back approx. 3 cm from the edge of the cheek piece
Weight: 260g. (353g. including scabbard)
Sheath: Kydex, with Kydex belt attachment
Packaging: Without box and certificates
Notes: -AP-TREE-RECON€0.00Only -20 leftOut of stock -
Charlton Ltd - Custom Damascus Bob Lum style Tanto - handcrafted knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased - knife dating back to the late 80s
* Condition: excellent condition
* Commercially available: Discontinued since 2018
* Sharpening: Factory
* Marks on blade: No
* Signs on the handle: very small marks
* Box: packaging
* Sheath: in wood
* Manuals, Certificates and Warranties: -
* Checked and Certified by our internal laboratoryIntended use: Collection / Vintage
Type of production: handcrafted
Country of production: USA
Blade: hand forged Damascus steel
Blade treatment: -
Handle: in wood
Blade length: 110mm.
Blade thickness: 5.5mm.
Total length: 230mm.
Weight: 245g.
Scabbard: wooden scabbard
Notes: limited edition 1 of 200AP-CHLTD€0.00Only -50 leftOut of stock -
Wander Tactical - Raptor - Satin SanMai CoS & Paracord - PRIVATE COLLECTION - craft knife
Knife withdrawn from a private collection - Limited edition production in Japanese CoS steel in SanMai dating back to 2018 and no longer available - In like new condition, no marks on the blade (never cut, never resharpened) or on the handle. Supplied with handmade Kydex sheath and Wander Tactical certificate - Checked and certified by our in-house Coltelleria Collini laboratory.
In collaboration with Wander Tactical we have decided to propose their new neck knife, the Raptor model, in an exclusive version with a satin blade that uses the famous Japanese San Mai steel produced by Takefu Steel. Specifically we used, for the central plate, the CoS at 61.5HRC (Cobalt Special, mechanically considered 25% higher than the already highly appreciated VG10) and the 420J2 (at 56 HRC) for the two side plates in order to guarantee a very high cutting capacity, but at the same time a remarkable resistance to abrasion, resilience and resistance to oxidation.
Use: Neck Knife / Collection
Type of production: Artisan
Production Lama: Italy
Blade: integral, in Japanese laminated stainless steel (San Mai) with cutting edge in CoS at 61.5HRC with cryogenic hardening
Blade treatment: Satin
Handle: Paracord
Blade length: 80mm.
Blade thickness: 6.5mm.
Total length: 175mm.
Balancing: backward
Weight: 156g.
Sheath: in Kydex, thermoformed, with lanyard for Neck Knife use
Packaging: -
Notes: Each knife is unique and handcrafted
As in the ancient Japanese Samurai swords.The rolled steel - imported into Italy by Collini Steel directly from the Japanese Takefu Steel - is based on the ancient Japanese tradition in the creation of the famous Samurai swords. In fact, as early as 1100 the expert Japanese blacksmiths combined different materials together to give the Katana swords incredible cutting capabilities combined with a resistance and flexibility previously unknown. It is thanks to this revolutionary construction technique that Samurai swords have been preserved to this day, becoming one of the most fascinating objects made by man. Following this tradition applied to modern metallurgy, today we are able to have technologically advanced steels already tested and used in cutlery also by famous brands such as Fallkniven, Cold Steel, Mcusta, Kai, Sog, Zwilling, Rockstead, etc.
Characteristics of San Mai steel: These are different types of metals bonded together to create a composite that encloses and intensifies the strengths of the metals individually taken:
- Longer life of the cutting edge
thanks to the use of very high quality steels with high carbon content (VG10, CoS, Shiro) or sintered (SPG2), in the heart of the sheet (Core Steel), the blade, once hardened, achieves decidedly hardness and cutting performance higher than those achieved with the use of traditional steels.- Greater resilience
built with the principle of Japanese swords, multilayer steel is difficult to break thanks to the toughness of the central steel (Core Steel) and the elasticity of the steel used for the side coating (Stainless Steel).- Better corrosion resistance
the steel used for the external layers (Stainless Steel) guarantees the blade a high resistance to corrosion. The combination of the two or more materials used by Takefu Steel generates, at the galvanic level, a structure that improves the corrosion resistance even on the wire.- Easy processing even after heat treatment
although steel normally becomes harder after hardening, the lateral steel used in multilayer processing does not lose its softness and allows easy processing, drilling or welding even after heat treatment. For an optimal performance of the blade, cryogenic treatment is recommended.- Improvement of the aesthetic result
The knives made with multi-state steel or with a damascus pattern at the end of the processing are aesthetically elegant, refined and highly appreciated by collectors all over the world.For more information: collinisteel
AP-WT-COS-RA-W -
Wander Tactical - Barracuda knife - Raw & Black Micarta - custom knife
Use: EDC / Light Utility / All Round
Type of production: Artisan
Country of production: Italy
Blade: integral, in D2 steel at 59 / 61HRC
Blade treatment: -
Handle: Micarta
Blade length: 100mm.
Blade thickness: 5mm.
Total length: 205mm.
Balancing: set back
Weight: 204g.
Sheath: in Kydex, thermoformed, with tek-lok type attachment
Packaging: -
Notes: Each knife is unique and handcrafted; there may be slight differences in finishes, colors and materials compared to the photographed productWT-BARR-B -
Wander Tactical - Prototype - PRIVATE COLLECTION - SanMai V-Toku2 & Desert Paracord - custom knife
Absolutely like new - Comes from a private collection - Unique item made in 2020, prototype, does not correspond to any standard model of Wander Tactical production - Made entirely by hand.
Use: Collection / Utility / Hunting
Production type: Handcrafted
Country of Production: Italy
Blade: integral, japanese rolled steel (San Mai) with V-Toku2 (carbonaceous) cutting edge at 62/63HRC and SUS410 (stainless steel) outer cheeks
Blade finish: satin finish
Handle: Paracord
Blade length: 90mm.
Blade thickness: 6.65mm.
Total length: 200mm.
Balance: backward
Weight: 180g.
Sheath: in kydex
Package: Certificate of authenticity
Notes: Unique piece of 2020 - Prototype: it doesn't correspond to any standard model of Wander Tactical production - Entirely hand made - Absolutely like new, coming from a private collection,Japanese steel merges with Italian excellence
For this 2019/2020 collaboration, exclusive to Coltelleria Collini, we decided to propose a series of best sellers produced by Wander Tactical. Knives made with the famous San Mai steel produced by the Japanese Takefu Steel. Specifically we have used the carbonaceous V-Toku2 at 62/63HRC for the central plate and the stainless SUS410 for the two external plates, in order to guarantee a very high cutting capacity, penetration and edge holding together with an easy resharpening and maintenance. At the same time the blade has a remarkable resistance to corrosion and an important increase of resilience given by the type of extreme steel and the laminated structure.
As in the ancient swords of the Japanese Samurai.
The rolled steel - imported in Italy by Collini Steel directly from the Japanese Takefu Steel - is based on the ancient Japanese tradition in the creation of the famous Samurai swords. As early as 1100, expert Japanese blacksmiths combined different materials to give Katana swords incredible cutting capabilities combined with previously unknown strength and flexibility. It is thanks to this revolutionary construction technique that the Samurai swords have been preserved until our days becoming one of the most fascinating objects made by man. Following this tradition applied to modern metallurgy, we are now able to have technologically advanced steels already tested and used in cutlery by famous brands such as Fallkniven, Cold Steel, Mcusta, Kai, Sog, Zwilling, Rockstead, etc.
Characteristics of San Mai steel: It is made of different types of metals alloyed together to create a composite that contains and intensifies the strengths of the metals taken individually:
- Longer cutting edge life
thanks to the use of high quality steels with a high carbon content (VG10, CoS, Shiro) or sintered (SPG2), in the core steel, the blade, once hardened, reaches hardness and cutting performance decidedly superior to those achieved with the use of traditional steels.- Greater resilience
Built on the principle of Japanese swords, the multilayer steel is difficult to break thanks to the toughness of the central steel (Core Steel) and the elasticity of the steel used for the lateral coating (Stainless Steel).- Improved corrosion resistance
The steel used for the outer layers (Stainless Steel) gives the blade a high resistance to corrosion. The combination of the two or more materials used by Takefu Steel generates, at a galvanic level, a structure that improves corrosion resistance even on the edge.- Easy machining even after heat treatment
Although steel normally becomes harder after hardening, the lateral steel used in multilayer machining does not lose its softness and allows easy machining, drilling or welding even after heat treatment. For optimum blade performance, cryogenic treatment is recommended.- Improved aesthetic performance
Knives made of multi-state steel or damascus pattern at the end of the processing are aesthetically elegant, refined and highly appreciated by collectors all over the world.For further information: collinisteel
WT-PRO-VT -
Wander Tactical - Scrambler knife - Raw Finish & Green Micarta - 6mm - custom knife
Use: EDC / Light Utility / All Round
Type of production: Artisan
Country of production: Italy
Blade: integral, in D2 steel at 59 / 61HRC
Blade treatment: Raw Finish
Handle: Micarta
Blade length: 90mm.
Blade thickness: 6mm.
Total length: 200mm.
Balancing: set back
Weight: 223g.
Sheath: in Kydex, thermoformed, compatible with tek-lok bindings (not supplied) or usable as a neck knife
Packaging: -
Notes: Each knife is unique and handcrafted; there may be slight differences in finishes, colors and materials compared to the photographed productWT-SCR-GM -
Wander Tactical - Scrambler knife - Raw Finish & Black Micarta - craft knife
Use: EDC / Light Utility / All Round
Type of production: Artisan
Country of production: Italy
Blade: integral, in D2 steel at 59 / 61HRC
Blade treatment: Raw Finish
Handle: Micarta
Blade length: 82mm.
Blade thickness: 5mm.
Total length: 200mm.
Balancing: set back
Weight: 205g.
Sheath: in Kydex, thermoformed, compatible with tek-lok bindings (not supplied) or usable as a neck knife
Packaging: -
Notes: Each knife is unique and handcrafted; there may be slight differences in finishes, colors and materials compared to the photographed productWT-SCR-BM -
Wander Tactical - Special Commando knife - Brown Micarta - custom knife
special knife made by Wander Tactical in April 2021
Type of production: Artisan
Production Lama: Italy
Blade: stainless steel Nitro-B 58 / 59HRC
Blade treatment: Proto
Handle: Brown Micarta
Blade length: 115mm.
Blade thickness: 5mm.
Total length: 270mm.
Balancing: on the branch of gurdia
Weight: 284g.
Sheath: in kydex and leather
Packaging: -
Notes: unique pieceWT-SC-BBM -
Wander Tactical - Special Commando knife - Brown Micarta - custom knife
special knife made by Wander Tactical in April 2021
Type of production: Artisan
Production Lama: Italy
Blade: stainless steel Nitro-B 58 / 59HRC
Blade treatment: Proto
Handle: Brown Micarta
Blade length: 115mm.
Blade thickness: 5mm.
Total length: 270mm.
Balancing: on the branch of gurdia
Weight: 284g.
Sheath: in kydex and leather
Packaging: -
Notes: unique pieceWT-USC-BM -
Wander Tactical - Special Commando knife - Brown Micarta - custom knife
special knife made by Wander Tactical in April 2021
Type of production: Artisan
Production Lama: Italy
Blade: stainless steel Nitro-B 58 / 59HRC
Blade treatment: Proto
Handle: Brown Micarta
Blade length: 115mm.
Blade thickness: 5mm.
Total length: 270mm.
Balancing: on the branch of gurdia
Weight: 284g.
Sheath: in kydex and leather
Packaging: -
Notes: unique pieceWT-SC-BM -
E.G. Custom - Hunting knife - horn and briar handle - entirely handmade
handcrafted knife entirely handmade with grinding wheel and file. The blade is made of ledeburitic steel with 2.3% carbon obtained by powder metallurgy and reaches a hardness of 64 HRC. Perfect for hunting and outdoor use.
Intended use: collection / hunting
Type of production: custom
Production Lama: USA
Blade: 64HRC powder steel
Blade treatment: -
Handle: in deer horn and tuya burl with brass guard
Blade length: 100mm.
Blade thickness: 5mm.
Total length: 240mm.
Weight: 172g.
Sheath: in brown leather sewn and handmade
Notes: knife made in Italy in the late 90s - certificate of the craftsmanCUS-1€0.00Only -20 leftOut of stock -
Indiana - Hunting knife Gran Safari - in deer horn - vintage knife
Rare hunting knife produced around the 1980s by the Indian company from Maniago. This extremely innovative knife for the years of production, is characterized by a handle entirely made of aluminum with natural horn insert. Excellent blade geometry for hunting and outdoor use
Intended use: Collection
Type of production: semi-artisanal
Blade: 440 stainless steel
Production Lama: Italy
Handle: aluminum and horn
Blade length: 90mm.
Blade thickness: 3mm.
Closed length: 125mm.
Total length: 220mm.
Balancing: -
Weight: 125g.
Closure: back lock
Clip:
Sheath: -
Note: -IN-HU-CO€172.13Out of stock -
Indiana - Hunting knife Gran Safari - buffalo horn - vintage knife
Rare hunting knife produced around the 1980s by the Indian company from Maniago. This extremely innovative knife for the years of production, is characterized by a handle entirely made of aluminum with natural horn insert. Excellent blade geometry for hunting and outdoor use
Intended use: Collection
Type of production: semi-artisanal
Blade: 440 stainless steel
Production Lama: Italy
Handle: aluminum and horn
Blade length: 90mm.
Blade thickness: 3mm.
Closed length: 125mm.
Total length: 220mm.
Balancing: -
Weight: 125g.
Closure: back lock
Clip:
Sheath: -
Note: -IN-HU-BU€229.51Out of stock -
Indiana - Set 3 pieces miniature knives - Survival Tanto series - collection knife
Faithful miniature reproduction of survival knives produced in Italy around the 90s
Intended use: Collection / Keychain
Type of production: semi-artisanal
Blade: 420 stainless steel
Production Lama: Italy
Handle: brass with unscrewable rear cap
Sheath: vinyl cordura sheath
Big Knife
Blade length: 75mm.
Blade thickness: 2mm.
Total length: 130mm.
Weight: 36g.Medium Knife
Blade length: 60mm.
Blade thickness: 2mm.
Total length: 90mm.
Weight: 15g.Small Knife
Blade length: 30mm.
Blade thickness: 2mm.
Total length: 50mm.
Weight: 3g.IN-SET1€0.00Only -20 leftOut of stock -
Wander Tactical - Dagger Tool - Limited Edition - craft knife
Use: Tactics / collection
Type of production: Artisan
Production Lama: Italy
Blade: integral, D2 steel
Blade treatment: gun cote heart
Handle: black micarta
Blade length: 110mm.
Blade thickness: 5mm.
Total length: 240mm.
Balancing: set back
Weight: 200g.
Sheath: in Kydex, thermoformed
Packaging: -
Notes: WT Limited Exclusive Project - Single Edge - Wander Tactical CertifiedWT-DA-MI -
Wander Tactical - Raptor knife - SanMai V-Toku2 & Green Paracord - kydex brown - custom knife
Japanese steel blends with Italian excellence
For this 2019/2020 collaboration, exclusive of Collini Cutlery, we have decided to propose a series of best sellers produced by Wander Tactical. Knives made with the famous San Mai steel produced by the Japanese Takefu Steel. Specifically, we used V-Toku2 carbonaceous at 62 / 63HRC for the central plate and SUS410 stainless steel for the two external plates, in order to guarantee a very high cutting capacity, penetration and sealing of the wire together with an easy regrinding and maintenance but at the same time the blade has a remarkable resistance to corrosion and an important increase in resilience given by the type of external steel and by the laminated structure.
RAPTOR model:
Use: Tactical / Utility
Type of production: Artisan
Production Lama: Italy
Blade: integral, laminated Japanese steel (San Mai) with V-Toku2 (carbonaceous) cutting edge at 62 / 63HRC and SUS410 (stainless steel) external scales
Blade finish: satin finish
Handle: Paracord
Blade length: 75mm.
Blade thickness: 6.5mm.
Total length: 178mm.
Balancing: set back
Weight: 149g.
Sheath: in brown kydex
Packaging: -
Notes: Each knife is unique and handcrafted - Wander Tactical certifiedAs in the ancient Japanese Samurai swords.
The rolled steel - imported into Italy by Collini Steel directly from the Japanese Takefu Steel - is based on the ancient Japanese tradition in the creation of the famous Samurai swords. In fact, as early as 1100 the expert Japanese blacksmiths combined different materials together to give the Katana swords incredible cutting abilities combined with a resistance and flexibility previously unknown. It is thanks to this revolutionary construction technique that Samurai swords have been preserved to this day, becoming one of the most fascinating objects made by man. Following this tradition applied to modern metallurgy, today we are able to have technologically advanced steels already tested and used in cutlery also by famous brands such as Fallkniven, Cold Steel, Mcusta, Kai, Sog, Zwilling, Rockstead, etc.
Characteristics of San Mai steel: These are different types of metals bonded together to create a composite that encloses and intensifies the strengths of the metals individually taken:
- Longer life of the cutting edge
thanks to the use of very high quality steels with high carbon content (VG10, CoS, Shiro) or sintered (SPG2), in the heart of the sheet (Core Steel), the blade, once hardened, achieves decidedly hardness and cutting performance higher than those achieved with the use of traditional steels.
- Greater resilience
built on the principle of Japanese swords, multilayer steel is difficult to break thanks to the toughness of the central steel (Core Steel) and the elasticity of the steel used for the side facing (Stainless Steel).- Better corrosion resistance
the steel used for the external layers (Stainless Steel) guarantees the blade a high resistance to corrosion. The combination of the two or more materials used by Takefu Steel generates, on a galvanic level, a structure that improves corrosion resistance even on the wire.- Easy processing even after heat treatment
although the steel normally becomes harder after hardening, the side steel used in multilayer processing does not lose its softness and allows easy processing, drilling or welding even after heat treatment. For an optimal performance of the blade, cryogenic treatment is recommended.- Improvement of the aesthetic result
The knives made with multi-state steel or damascus pattern at the end of the processing are aesthetically elegant, refined and highly appreciated by collectors all over the world.For more information: collinisteel
WT-RAP-VT-B -
Wander Tactical - Prototype X-020 knife - Green paracord - custom knife
special prototype made by Wander Tactical in October 2020
Type of production: Artisan
Production Lama: Italy
Blade: stainless steel Nitro-B 58 / 59HRC
Blade treatment: -
Handle: Green paracord
Blade length: 115mm.
Blade thickness: 5mm.
Total length: 260mm.
Balancing: on the branch of gurdia
Weight: 201g.
Sheath: in kydex
Packaging: -
Notes: unique pieceWT-X020 -
Wander Tactical - Tryceratops knife Clip Point - SanMai V-Toku2 & Black Micarta - custom knife
Japanese steel blends with Italian excellence
For this 2019/2020 collaboration, exclusive of Collini Cutlery, we have decided to propose a series of best sellers produced by Wander Tactical. Knives made with the famous San Mai steel produced by the Japanese Takefu Steel. Specifically, we used V-Toku2 carbonaceous at 62 / 63HRC for the central plate and SUS410 stainless steel for the two external plates, in order to guarantee a very high cutting capacity, penetration and sealing of the wire together with an ease of regrinding. and maintenance but at the same time the blade has a remarkable resistance to corrosion and an important increase in resilience given by the type of extrene steel and by the laminated structure.
Tryceratops model .:
Use: Tactical / Utility
Type of production: Artisan
Production Lama: Italy
Blade: integral, in Japanese laminated steel (San Mai) with V-Toku2 (carbonaceous) cutting edge at 62 / 63HRC and external SUS410 (stainless steel) scales
Blade finish: satin finish
Handle: Micarta
Blade length: 70mm.
Blade thickness: 6.5mm.
Total length: 130mm.
Balancing: set back
Weight: 188g.
Sheath: in kydex black
Packaging: -
Notes: Each knife is unique and handcrafted - Wander Tactical certifiedAs in the ancient Japanese Samurai swords.
The rolled steel - imported into Italy by Collini Steel directly from the Japanese Takefu Steel - is based on the ancient Japanese tradition in the creation of the famous Samurai swords. In fact, as early as 1100 the expert Japanese blacksmiths combined different materials together to give the Katana swords incredible cutting capabilities combined with a resistance and flexibility previously unknown. It is thanks to this revolutionary construction technique that Samurai swords have been preserved to this day, becoming one of the most fascinating objects made by man. Following this tradition applied to modern metallurgy, today we are able to have technologically advanced steels already tested and used in cutlery also by famous brands such as Fallkniven, Cold Steel, Mcusta, Kai, Sog, Zwilling, Rockstead, etc.
Characteristics of San Mai steel: These are different types of metals bonded together to create a composite that encloses and intensifies the strengths of the metals individually taken:
- Longer tool life
thanks to the use of very high quality steels with high carbon content (VG10, CoS, Shiro) or sintered (SPG2), in the heart of the sheet (Core Steel), the blade, once hardened, achieves decidedly hardness and cutting performance higher than those achieved with the use of traditional steels.
- Greater resilience
built on the principle of Japanese swords, multilayer steel is difficult to break thanks to the toughness of the central steel (Core Steel) and the elasticity of the steel used for the side facing (Stainless Steel).- Better corrosion resistance
the steel used for the external layers (Stainless Steel) guarantees the blade a high resistance to corrosion. The combination of the two or more materials used by Takefu Steel generates, on a galvanic level, a structure that improves corrosion resistance even on the wire.- Easy processing even after heat treatment
although the steel normally becomes harder after hardening, the side steel used in multilayer processing does not lose its softness and allows easy processing, drilling or welding even after heat treatment. For an optimal performance of the blade, cryogenic treatment is recommended.- Improvement of the aesthetic result
The knives made with multi-state steel or damascus pattern at the end of the processing are aesthetically elegant, refined and highly appreciated by collectors all over the world.For more information: collinisteel
WT-TRY-C-VT -
Wander Tactical - Primitive Dagger Tool - Limited Edition - custom knife
Use: Tactics / collection
Type of production: Artisan
Production Lama: Italy
Blade: integral, D2 steel
Blade treatment: dual tone
Handle: black micarta
Blade length: 110mm.
Blade thickness: 5mm.
Total length: 240mm.
Balancing: set back
Weight: 200g.
Sheath: in Kydex, thermoformed
Packaging: -
Notes: WT exclusive project limited to 5 pieces - single edge - Wander Tactical certifiedWT-DAG-P -
Wander Tactical - Raptor knife - SanMai V-Toku2 & Green Paracord - custom knife
Japanese steel blends with Italian excellence
For this 2019/2020 collaboration, exclusive of Collini Cutlery, we have decided to propose a series of best sellers produced by Wander Tactical. Knives made with the famous San Mai steel produced by the Japanese Takefu Steel. Specifically, we used V-Toku2 carbonaceous at 62 / 63HRC for the central plate and SUS410 stainless steel for the two external plates, in order to guarantee a very high cutting capacity, penetration and sealing of the wire together with an easy regrinding. and maintenance but at the same time the blade has a remarkable resistance to corrosion and an important increase in resilience given by the type of extrene steel and by the laminated structure.
RAPTOR model:
Use: Tactical / Utility
Type of production: Artisan
Production Lama: Italy
Blade: integral, laminated Japanese steel (San Mai) with V-Toku2 (carbonaceous) cutting edge at 62 / 63HRC and SUS410 (stainless steel) external scales
Blade finish: satin finish
Handle: Paracord
Blade length: 75mm.
Blade thickness: 6.5mm.
Total length: 178mm.
Balancing: set back
Weight: 149g.
Sheath: in green kydex
Packaging: -
Notes: Each knife is unique and handcrafted - Wander Tactical certifiedAs in the ancient Japanese Samurai swords.
The rolled steel - imported into Italy by Collini Steel directly from the Japanese Takefu Steel - is based on the ancient Japanese tradition in the creation of the famous Samurai swords. In fact, as early as 1100 the expert Japanese blacksmiths combined different materials together to give the Katana swords incredible cutting abilities combined with a resistance and flexibility previously unknown. It is thanks to this revolutionary construction technique that Samurai swords have been preserved to this day, becoming one of the most fascinating objects made by man. Following this tradition applied to modern metallurgy, today we are able to have technologically advanced steels already tested and used in cutlery also by famous brands such as Fallkniven, Cold Steel, Mcusta, Kai, Sog, Zwilling, Rockstead, etc.
Characteristics of San Mai steel: These are different types of metals bonded together to create a composite that encloses and intensifies the strengths of the metals individually taken:
- Longer tool life
thanks to the use of very high quality steels with high carbon content (VG10, CoS, Shiro) or sintered (SPG2), in the heart of the sheet (Core Steel), the blade, once hardened, achieves decidedly hardness and cutting performance higher than those achieved with the use of traditional steels.
- Greater resilience
built on the principle of Japanese swords, multilayer steel is difficult to break thanks to the toughness of the central steel (Core Steel) and the elasticity of the steel used for the side facing (Stainless Steel).- Better corrosion resistance
the steel used for the external layers (Stainless Steel) guarantees the blade a high resistance to corrosion. The combination of the two or more materials used by Takefu Steel generates, on a galvanic level, a structure that improves corrosion resistance even on the wire.- Easy processing even after heat treatment
although the steel normally becomes harder after hardening, the side steel used in multilayer processing does not lose its softness and allows easy processing, drilling or welding even after heat treatment. For an optimal performance of the blade, cryogenic treatment is recommended.- Improvement of the aesthetic result
The knives made with multi-state steel or with a damask pattern at the end of the processing are aesthetically elegant, refined and highly appreciated by collectors all over the world.For more information: collinisteel
WT-RAP-VT -
Wander Tactical - Scrambler knife - SanMai V-Toku2 & Black Micarta - custom knife
In collaboration with Wander Tactical we have decided to propose the Scrambler model, in an exclusive satin-blade version that uses the famous Japanese San Mai steel produced by Takefu Steel.
This time, in the rich catalog of products they offer, we have chosen a particular steel with a carbonaceous edge, but with external stainless steel cheeks. Specifically we used, for the central plate, the carbonaceous V-Toku2 at 62 / 63HRC and the SUS410 for the external lamination in order to guarantee a very high cutting capacity, penetration and sealing of the wire together with an ease of re-sharpening and maintenance; at the same time the blade has a remarkable resistance to corrosion and an important increase in resilience given by the laminated structure.
Use: EDC / Light Utility / All RoundType of production: Artisan
Production Lama: Italy
Blade: integral, laminated Japanese steel (San Mai) with V-Toku2 (carbonaceous) cutting edge at 62 / 63HRC and SUS410 (stainless steel) external scales
Blade treatment: Satin
Handle: Micarta
Blade length: 82mm.
Blade thickness: 6.8mm.
Total length: 200mm.
Balancing: set back
Weight: 229g.
Sheath: in Kydex, thermoformed, with belt loop
Packaging: certificate of authenticity
Notes: unique and exclusive pieceAs in the ancient Japanese Samurai swords.
The rolled steel - imported into Italy by Collini Steel directly from the Japanese Takefu Steel - is based on the ancient Japanese tradition in the creation of the famous Samurai swords. In fact, as early as 1100 the expert Japanese blacksmiths combined different materials together to give the Katana swords incredible cutting abilities combined with a resistance and flexibility previously unknown. It is thanks to this revolutionary construction technique that Samurai swords have been preserved to this day, becoming one of the most fascinating objects made by man. Following this tradition applied to modern metallurgy, today we are able to have technologically advanced steels already tested and used in cutlery also by famous brands such as Fallkniven, Cold Steel, Mcusta, Kai, Sog, Zwilling, Rockstead, etc.
Characteristics of San Mai steel: These are different types of metals bonded together to create a composite that encloses and intensifies the strengths of the metals individually taken:
- Longer tool life
thanks to the use of very high quality steels with high carbon content (VG10, CoS, Shiro) or sintered (SPG2), in the heart of the sheet (Core Steel), the blade, once hardened, achieves decidedly hardness and cutting performance higher than those achieved with the use of traditional steels.
- Greater resilience
built on the principle of Japanese swords, multilayer steel is difficult to break thanks to the toughness of the central steel (Core Steel) and the elasticity of the steel used for the side facing (Stainless Steel).- Better corrosion resistance
the steel used for the external layers (Stainless Steel) guarantees the blade a high resistance to corrosion. The combination of the two or more materials used by Takefu Steel generates, on a galvanic level, a structure that improves corrosion resistance even on the wire.- Easy processing even after heat treatment
although the steel normally becomes harder after hardening, the side steel used in multilayer processing does not lose its softness and allows easy processing, drilling or welding even after heat treatment. For an optimal performance of the blade, cryogenic treatment is recommended.- Improvement of the aesthetic result
The knives made with multi-state steel or with a damask pattern at the end of the processing are aesthetically elegant, refined and highly appreciated by collectors all over the world.For more information: collinisteel
WT-SC-VT -
Wander Tactical - Scrambler knife - SanMai V-Toku2 & Desert Micarta - coltello custom
Japanese steel merges with Italian excellence
For this 2019/2020 collaboration, exclusive to Collini Cutlery, we have decided to offer a series of best sellers produced by Wander Tactical. Knives made with the famous San Mai steel produced by the Japanese Takefu Steel. Specifically, for the central sheet we used the carbonaceous V-Toku2 at 62 / 63HRC and the stainless SUS410 for the two external sheets, in order to guarantee a very high cutting, penetration and sealing capacity of the wire together with an ease of regrinding and maintenance but at the same time the blade has a remarkable resistance to corrosion and an important increase in resilience given by the type of foreign steel and the laminated structure.
SCRAMBLER Model .:
Occupation: Tactical / Utility
Type of production: Artisan
Lama production: Italy
Blade: integral, in Japanese laminated steel (San Mai) with cutting edge in V-Toku2 (carbon) at 62 / 63HRC and external cheeks in SUS410 (stainless steel)
Blade finish: satin finish
Handle: Micarta
Blade length: 95mm.
Blade thickness: 6.5mm.
Total length: 210mm.
Balancing: backward
Weight: 212g.
Sheath: brown kydex
Packaging: -
Notes: Each knife is unique and handcrafted - Wander Tactical certifiedAs in the ancient swords of the Japanese Samurai.
Rolled steel - imported into Italy from Collini Steel directly from the Japanese Takefu Steel - is based on the ancient Japanese tradition in the creation of the famous Samurai swords. Already in 1100 the expert Japanese blacksmiths in fact combined different materials to give the Katana swords incredible cutting capabilities combined with a resistance and flexibility previously unknown. It is thanks to this revolutionary construction technique that the swords from Samurai have been preserved to the present day becoming one of the most fascinating objects made by man. Following this tradition applied to modern metallurgy, we are now able to have technologically advanced steels already tested and used in cutlery also by famous brands such as Fallkniven, Cold Steel, Mcusta, Kai, Sog, Zwilling, Rockstead, etc.
Characteristics of San Mai steel: These are different types of metals bonded together to create a composite that encloses and intensifies the strengths of the metals taken individually:
- Longer tool life
thanks to the use of high quality steel with a high carbon content (VG10, CoS, Shiro) or sintered (SPG2), in the heart of the sheet (Core Steel), the blade once hardened, achieves hardness and cutting performance decidedly higher than those achieved with the use of traditional steels.- Greater resilience
built with the principle of Japanese swords, multilayer steel is difficult to break thanks to the toughness of the central steel (Core Steel) and the elasticity of the steel used for the lateral coating (Stainless Steel).- Better corrosion resistance
the steel used for the external layers (Stainless Steel) guarantees the blade a high resistance to corrosion. The combination of the two or more materials used by Takefu Steel generates, at the galvanic level, a structure that improves the corrosion resistance also on the wire.- Easy processing even after heat treatment
although normally the steel becomes harder after hardening, the lateral steel used in multi-layer processing does not lose its softness and allows easy processing, drilling or welding even after heat treatment. For optimum performance of the blade, cryogenic treatment is recommended.- Improvement of the aesthetic result
The knives made with multistate steel or with a damask pattern at the end of the processing are aesthetically elegant, refined and highly appreciated by collectors all over the world.For more information: collinisteel
WT-SC-VT-D -
Wander Tactical - Tryceratops Compound knife - SanMai V-Toku2 & Brown Micarta - custom knife
Japanese steel blends with Italian excellence
For this 2019/2020 collaboration, exclusive to Collini Cutlery, we have decided to offer a series of best sellers produced by Wander Tactical. Knives made with the famous San Mai steel produced by the Japanese Takefu Steel. Specifically, for the central sheet we used the carbonaceous V-Toku2 at 62 / 63HRC and the stainless SUS410 for the two external sheets, in order to guarantee a very high cutting, penetration and sealing capacity of the wire together with an ease of regrinding and maintenance but at the same time the blade has a remarkable corrosion resistance and an important increase in resilience given by the type of foreign steel and the laminated structure.
Tryceratops Model .:
Occupation: Tactical / Utility
Type of production: Artisan
Lama production: Italy
Blade: integral, in Japanese laminated steel (San Mai) with cutting edge in V-Toku2 (carbonaceous) at 62 / 63HRC and external cheeks in SUS410 (stainless steel)
Blade finish: satin finish
Handle: Micarta
Blade length: 70mm.
Blade thickness: 6.5mm.
Total length: 130mm.
Balancing: backward
Weight: 184g.
Sheath: brown kydex
Packaging: -
Notes: Each knife is unique and handcrafted - Wander Tactical certifiedAs in the ancient swords of the Japanese Samurai.
Rolled steel - imported into Italy from Collini Steel directly from the Japanese Takefu Steel - is based on the ancient Japanese tradition in the creation of the famous Samurai swords. Already in 1100 the expert Japanese blacksmiths in fact combined different materials to give the Katana swords incredible cutting capabilities combined with a resistance and flexibility previously unknown. It is thanks to this revolutionary construction technique that the swords from Samurai have been preserved to the present day becoming one of the most fascinating objects made by man. Following this tradition applied to modern metallurgy, we are now able to have technologically advanced steels already tested and used in cutlery also by famous brands such as Fallkniven, Cold Steel, Mcusta, Kai, Sog, Zwilling, Rockstead, etc.
Characteristics of San Mai steel: These are different types of metals bonded together to create a composite that encloses and intensifies the strengths of the metals taken individually:
- Longer tool life
thanks to the use of high quality steel with a high carbon content (VG10, CoS, Shiro) or sintered (SPG2), in the heart of the sheet (Core Steel), the blade once hardened, achieves decidedly hardness and cutting performance higher than those achieved with the use of traditional steels.- Greater resilience
built with the principle of Japanese swords, multilayer steel is difficult to break thanks to the toughness of the central steel (Core Steel) and the elasticity of the steel used for the lateral coating (Stainless Steel).- Better corrosion resistance
the steel used for the external layers (Stainless Steel) guarantees the blade a high resistance to corrosion. The combination of the two or more materials used by Takefu Steel generates, at the galvanic level, a structure that improves corrosion resistance even on the wire.- Easy processing even after heat treatment
although normally the steel becomes harder after hardening, the lateral steel used in multi-layer processing does not lose its softness and allows easy processing, drilling or welding even after heat treatment. For optimum performance of the blade, cryogenic treatment is recommended.- Improvement of the aesthetic result
The knives made with multistate steel or with damask pattern at the end of the processing are aesthetically elegant, refined and highly appreciated by collectors all over the world.WT-TR-VT-C -
Wander Tactical - Raptor compound knife - SanMai V-Toku2 & OD black Paracord - custom knife
Japanese steel merges with Italian excellence
For this 2019/2020 collaboration, exclusive to Collini Cutlery, we have decided to offer a series of best sellers produced by Wander Tactical. Knives made with the famous San Mai steel produced by the Japanese Takefu Steel. Specifically, for the central sheet we used the carbonaceous V-Toku2 at 62 / 63HRC and the stainless SUS410 for the two external sheets, in order to guarantee a very high cutting, penetration and sealing capacity of the wire together with an ease of regrinding and maintenance but at the same time the blade has a remarkable resistance to corrosion and an important increase in resilience given by the type of foreign steel and the laminated structure.
RAPTOR model:
Occupation: Tactical / Utility
Type of production: Artisan
Lama production: Italy
Blade: integral, in Japanese laminated steel (San Mai) with cutting edge in V-Toku2 (carbon) at 62 / 63HRC and external cheeks in SUS410 (stainless steel)
Blade finish: satin finish
Handle: Paracord
Blade length: 75mm.
Blade thickness: 6.5mm.
Total length: 178mm.
Balancing: backward
Weight: 136g.
Sheath: black kydex
Packaging: -
Notes: Each knife is unique and handcrafted - Wander Tactical certifiedAs in the ancient swords of the Japanese Samurai.
Rolled steel - imported into Italy from Collini Steel directly from the Japanese Takefu Steel - is based on the ancient Japanese tradition in the creation of the famous Samurai swords. Already in 1100 the expert Japanese blacksmiths in fact combined different materials to give the Katana swords incredible cutting capabilities combined with a resistance and flexibility previously unknown. It is thanks to this revolutionary construction technique that the swords from Samurai have been preserved to the present day becoming one of the most fascinating objects made by man. Following this tradition applied to modern metallurgy, we are now able to have technologically advanced steels already tested and used in cutlery also by famous brands such as Fallkniven, Cold Steel, Mcusta, Kai, Sog, Zwilling, Rockstead, etc.
Characteristics of San Mai steel: These are different types of metals bonded together to create a composite that encloses and intensifies the strengths of the metals taken individually:
- Longer tool life
thanks to the use of high quality steel with a high carbon content (VG10, CoS, Shiro) or sintered (SPG2), in the heart of the sheet (Core Steel), the blade once hardened, achieves hardness and cutting performance decidedly higher than those achieved with the use of traditional steels.- Greater resilience
built with the principle of Japanese swords, multilayer steel is difficult to break thanks to the toughness of the central steel (Core Steel) and the elasticity of the steel used for the lateral coating (Stainless Steel).- Better corrosion resistance
the steel used for the external layers (Stainless Steel) guarantees the blade a high resistance to corrosion. The combination of the two or more materials used by Takefu Steel generates, at the galvanic level, a structure that improves the corrosion resistance also on the wire.- Easy processing even after heat treatment
although normally the steel becomes harder after hardening, the lateral steel used in multi-layer processing does not lose its softness and allows easy processing, drilling or welding even after heat treatment. For optimum performance of the blade, cryogenic treatment is recommended.- Improvement of the aesthetic result
The knives made with multistate steel or with a damask pattern at the end of the processing are aesthetically elegant, refined and highly appreciated by collectors all over the world.For more information: collinisteel
WT-R-VT-C -
Wander Tactical - Scrambler knife - SanMai V-Toku2 & Black Micarta - custom
In collaboration with Wander Tactical we have decided to offer their heavy duty, the Smilodon model, in an exclusive satin blade version that uses the famous Japanese San Mai steel produced by Takefu Steel.
This time, in the rich catalog of products offered by them, we chose a particular steel with a carbon cutting edge, but with external stainless steel cheeks. Specifically, for the central sheet we used the carbonaceous V-Toku2 at 62 / 63HRC and the SUS410 for external lamination in order to guarantee a very high cutting, penetration and sealing capacity of the wire together with an ease of regrinding and maintenance; at the same time the blade has a remarkable corrosion resistance and an important increase in resilience given by the laminated structure.
Use: EDC / Light Utility / All Round
Type of production: Artisan
Lama production: Italy
Blade: integral, in Japanese laminated steel (San Mai) with cutting edge in V-Toku2 (carbon) at 62 / 63HRC and external cheeks in SUS410 (stainless steel)
Blade treatment: Satin
Handle: Micarta
Blade length: 82mm.
Blade thickness: 6.8mm.
Total length: 200mm.
Balancing: backward
Weight: 215g.
Sheath: Kydex, thermoformed, with belt loop
Packaging: certificate of authenticity
Notes: unique and exclusive pieceWT-SC-VT2B -
Wander Tactical - Scrambler knife - SanMai V-Toku2 & Brown Micarta - custom knife
Japanese steel merges with Italian excellence
For this 2019/2020 collaboration, exclusive to Collini Cutlery, we have decided to offer a series of best sellers produced by Wander Tactical. Knives made with the famous San Mai steel produced by the Japanese Takefu Steel. Specifically, for the central sheet we used the carbonaceous V-Toku2 at 62 / 63HRC and the stainless SUS410 for the two external sheets, in order to guarantee a very high cutting, penetration and sealing capacity of the wire together with an ease of regrinding and maintenance but at the same time the blade has a remarkable resistance to corrosion and an important increase in resilience given by the type of foreign steel and the laminated structure.
SCRAMBLER Model .:
Occupation: Tactical / Utility
Type of production: Artisan
Lama production: Italy
Blade: integral, in Japanese laminated steel (San Mai) with cutting edge in V-Toku2 (carbon) at 62 / 63HRC and external cheeks in SUS410 (stainless steel)
Blade finish: satin finish
Handle: Micarta
Blade length: 95mm.
Blade thickness: 6.5mm.
Total length: 210mm.
Balancing: backward
Weight: 212g.
Sheath: brown kydex
Packaging: -
Notes: Each knife is unique and handcrafted - Wander Tactical certifiedAs in the ancient swords of the Japanese Samurai.
Rolled steel - imported into Italy from Collini Steel directly from the Japanese Takefu Steel - is based on the ancient Japanese tradition in the creation of the famous Samurai swords. Already in 1100 the expert Japanese blacksmiths in fact combined different materials to give the Katana swords incredible cutting capabilities combined with a resistance and flexibility previously unknown. It is thanks to this revolutionary construction technique that the swords from Samurai have been preserved to the present day becoming one of the most fascinating objects made by man. Following this tradition applied to modern metallurgy, we are now able to have technologically advanced steels already tested and used in cutlery also by famous brands such as Fallkniven, Cold Steel, Mcusta, Kai, Sog, Zwilling, Rockstead, etc.
Characteristics of San Mai steel: These are different types of metals bonded together to create a composite that encloses and intensifies the strengths of the metals taken individually:
- Longer tool life
thanks to the use of high quality steel with a high carbon content (VG10, CoS, Shiro) or sintered (SPG2), in the heart of the sheet (Core Steel), the blade once hardened, achieves hardness and cutting performance decidedly higher than those achieved with the use of traditional steels.- Greater resilience
built with the principle of Japanese swords, multilayer steel is difficult to break thanks to the toughness of the central steel (Core Steel) and the elasticity of the steel used for the lateral coating (Stainless Steel).- Better corrosion resistance
the steel used for the external layers (Stainless Steel) guarantees the blade a high resistance to corrosion. The combination of the two or more materials used by Takefu Steel generates, at the galvanic level, a structure that improves the corrosion resistance also on the wire.- Easy processing even after heat treatment
although normally the steel becomes harder after hardening, the lateral steel used in multi-layer processing does not lose its softness and allows easy processing, drilling or welding even after heat treatment. For optimum performance of the blade, cryogenic treatment is recommended.- Improvement of the aesthetic result
The knives made with multistate steel or with a damask pattern at the end of the processing are aesthetically elegant, refined and highly appreciated by collectors all over the world.For more information: collinisteel
WT-TR-VT2 -
Wander Tactical - Raptor knife - SanMai V-Toku2 & OD green Paracord - custom knife
Japanese steel merges with Italian excellence
For this 2019/2020 collaboration, exclusive to Collini Cutlery, we have decided to offer a series of best sellers produced by Wander Tactical. Knives made with the famous San Mai steel produced by the Japanese Takefu Steel. Specifically, for the central sheet we used the carbonaceous V-Toku2 at 62 / 63HRC and the stainless SUS410 for the two external sheets, in order to guarantee a very high cutting, penetration and sealing capacity of the wire together with an ease of regrinding and maintenance but at the same time the blade has a remarkable resistance to corrosion and an important increase in resilience given by the type of foreign steel and the laminated structure.
RAPTOR model:
Occupation: Tactical / Utility
Type of production: Artisan
Lama production: Italy
Blade: integral, in Japanese laminated steel (San Mai) with cutting edge in V-Toku2 (carbon) at 62 / 63HRC and external cheeks in SUS410 (stainless steel)
Blade finish: satin finish
Handle: Paracord
Blade length: 75mm.
Blade thickness: 6.5mm.
Total length: 178mm.
Balancing: backward
Weight: 136g.
Sheath: black kydex
Packaging: -
Notes: Each knife is unique and handcrafted - Wander Tactical certifiedAs in the ancient swords of the Japanese Samurai.
Rolled steel - imported into Italy from Collini Steel directly from the Japanese Takefu Steel - is based on the ancient Japanese tradition in the creation of the famous Samurai swords. Already in 1100 the expert Japanese blacksmiths in fact combined different materials to give the Katana swords incredible cutting capabilities combined with a resistance and flexibility previously unknown. It is thanks to this revolutionary construction technique that the swords from Samurai have been preserved to the present day becoming one of the most fascinating objects made by man. Following this tradition applied to modern metallurgy, we are now able to have technologically advanced steels already tested and used in cutlery also by famous brands such as Fallkniven, Cold Steel, Mcusta, Kai, Sog, Zwilling, Rockstead, etc.
Characteristics of San Mai steel: These are different types of metals bonded together to create a composite that encloses and intensifies the strengths of the metals taken individually:
- Longer tool life
thanks to the use of high quality steel with a high carbon content (VG10, CoS, Shiro) or sintered (SPG2), in the heart of the sheet (Core Steel), the blade once hardened, achieves hardness and cutting performance decidedly higher than those achieved with the use of traditional steels.- Greater resilience
built with the principle of Japanese swords, multilayer steel is difficult to break thanks to the toughness of the central steel (Core Steel) and the elasticity of the steel used for the lateral coating (Stainless Steel).- Better corrosion resistance
the steel used for the external layers (Stainless Steel) guarantees the blade a high resistance to corrosion. The combination of the two or more materials used by Takefu Steel generates, at the galvanic level, a structure that improves the corrosion resistance also on the wire.- Easy processing even after heat treatment
although normally the steel becomes harder after hardening, the lateral steel used in multi-layer processing does not lose its softness and allows easy processing, drilling or welding even after heat treatment. For optimum performance of the blade, cryogenic treatment is recommended.- Improvement of the aesthetic result
The knives made with multistate steel or with a damask pattern at the end of the processing are aesthetically elegant, refined and highly appreciated by collectors all over the world.For more information: collinisteel
WT-RAP-VT2 -
Wander Tactical - Lynx knife - SanMai V-Toku2 & Brown Micarta - custom knife
Japanese steel merges with Italian excellence
For this 2019/2020 collaboration, exclusive to Collini Cutlery, we have decided to offer a series of best sellers produced by Wander Tactical. Knives made with the famous San Mai steel produced by the Japanese Takefu Steel. Specifically, for the central sheet we used the carbonaceous V-Toku2 at 62 / 63HRC and the stainless SUS410 for the two external sheets, in order to guarantee a very high cutting, penetration and sealing capacity of the wire together with an ease of regrinding and maintenance but at the same time the blade has a remarkable resistance to corrosion and an important increase in resilience given by the type of foreign steel and the laminated structure.
Lynx Model:
Occupation: Tactical / Utility
Type of production: Artisan
Lama production: Italy
Blade: integral, in Japanese laminated steel (San Mai) with cutting edge in V-Toku2 (carbon) at 62 / 63HRC and external cheeks in SUS410 (stainless steel)
Blade finish: satin finish
Handle: Micarta
Blade length: 107mm.
Blade thickness: 6.5mm.
Total length: 237mm.
Balancing: backward
Weight: 310g.
Sheath: brown leather
Packaging: -
Notes: Each knife is unique and handcrafted - Wander Tactical certifiedAs in the ancient swords of the Japanese Samurai.
Rolled steel - imported into Italy from Collini Steel directly from the Japanese Takefu Steel - is based on the ancient Japanese tradition in the creation of the famous Samurai swords. Already in 1100 the expert Japanese blacksmiths in fact combined different materials to give the Katana swords incredible cutting capabilities combined with a resistance and flexibility previously unknown. It is thanks to this revolutionary construction technique that the swords from Samurai have been preserved to the present day becoming one of the most fascinating objects made by man. Following this tradition applied to modern metallurgy, we are now able to have technologically advanced steels already tested and used in cutlery also by famous brands such as Fallkniven, Cold Steel, Mcusta, Kai, Sog, Zwilling, Rockstead, etc.
Characteristics of San Mai steel: These are different types of metals bonded together to create a composite that encloses and intensifies the strengths of the metals taken individually:
- Longer tool life
thanks to the use of high quality steel with a high carbon content (VG10, CoS, Shiro) or sintered (SPG2), in the heart of the sheet (Core Steel), the blade once hardened, achieves hardness and cutting performance decidedly higher than those achieved with the use of traditional steels.- Greater resilience
built with the principle of Japanese swords, multilayer steel is difficult to break thanks to the toughness of the central steel (Core Steel) and the elasticity of the steel used for the lateral coating (Stainless Steel).- Better corrosion resistance
the steel used for the external layers (Stainless Steel) guarantees the blade a high resistance to corrosion. The combination of the two or more materials used by Takefu Steel generates, at the galvanic level, a structure that improves the corrosion resistance also on the wire.- Easy processing even after heat treatment
although normally the steel becomes harder after hardening, the lateral steel used in multi-layer processing does not lose its softness and allows easy processing, drilling or welding even after heat treatment. For optimum performance of the blade, cryogenic treatment is recommended.- Improvement of the aesthetic result
The knives made with multistate steel or with a damask pattern at the end of the processing are aesthetically elegant, refined and highly appreciated by collectors all over the world.For more information: collinisteel
WT-LY-VT2 -
Wander Tactical - Scrambler knife - SanMai V-Toku2 & Brown Micarta - custom knife
Japanese steel merges with Italian excellence
For this 2019/2020 collaboration, exclusive to Collini Cutlery, we have decided to offer a series of best sellers produced by Wander Tactical. Knives made with the famous San Mai steel produced by the Japanese Takefu Steel. Specifically, for the central sheet we used the carbonaceous V-Toku2 at 62 / 63HRC and the stainless SUS410 for the two external sheets, in order to guarantee a very high cutting, penetration and sealing capacity of the wire together with an ease of regrinding and maintenance but at the same time the blade has a remarkable resistance to corrosion and an important increase in resilience given by the type of foreign steel and the laminated structure.
SCRAMBLER Model .:
Occupation: Tactical / Utility
Type of production: Artisan
Lama production: Italy
Blade: integral, in Japanese laminated steel (San Mai) with cutting edge in V-Toku2 (carbon) at 62 / 63HRC and external cheeks in SUS410 (stainless steel)
Blade finish: satin finish
Handle: Micarta
Blade length: 95mm.
Blade thickness: 6.5mm.
Total length: 210mm.
Balancing: backward
Weight: 212g.
Sheath: brown kydex
Packaging: -
Notes: Each knife is unique and handcrafted - Wander Tactical certifiedAs in the ancient swords of the Japanese Samurai.
Rolled steel - imported into Italy from Collini Steel directly from the Japanese Takefu Steel - is based on the ancient Japanese tradition in the creation of the famous Samurai swords. Already in 1100 the expert Japanese blacksmiths in fact combined different materials to give the Katana swords incredible cutting capabilities combined with a resistance and flexibility previously unknown. It is thanks to this revolutionary construction technique that the swords from Samurai have been preserved to the present day becoming one of the most fascinating objects made by man. Following this tradition applied to modern metallurgy, we are now able to have technologically advanced steels already tested and used in cutlery also by famous brands such as Fallkniven, Cold Steel, Mcusta, Kai, Sog, Zwilling, Rockstead, etc.
Characteristics of San Mai steel: These are different types of metals bonded together to create a composite that encloses and intensifies the strengths of the metals taken individually:
- Longer tool life
thanks to the use of high quality steel with a high carbon content (VG10, CoS, Shiro) or sintered (SPG2), in the heart of the sheet (Core Steel), the blade once hardened, achieves hardness and cutting performance decidedly higher than those achieved with the use of traditional steels.- Greater resilience
built with the principle of Japanese swords, multilayer steel is difficult to break thanks to the toughness of the central steel (Core Steel) and the elasticity of the steel used for the lateral coating (Stainless Steel).- Better corrosion resistance
the steel used for the external layers (Stainless Steel) guarantees the blade a high resistance to corrosion. The combination of the two or more materials used by Takefu Steel generates, at the galvanic level, a structure that improves the corrosion resistance also on the wire.- Easy processing even after heat treatment
although normally the steel becomes harder after hardening, the lateral steel used in multi-layer processing does not lose its softness and allows easy processing, drilling or welding even after heat treatment. For optimum performance of the blade, cryogenic treatment is recommended.- Improvement of the aesthetic result
The knives made with multistate steel or with a damask pattern at the end of the processing are aesthetically elegant, refined and highly appreciated by collectors all over the world.For more information: collinisteel
WT-SC-VT2R -
Wander Tactical - Uro knife - SanMai V-Toku2 & Brown Micarta - custom knife
Japanese steel merges with Italian excellence
For this 2019/2020 collaboration, exclusive to Collini Cutlery, we have decided to offer a series of best sellers produced by Wander Tactical. Knives made with the famous San Mai steel produced by the Japanese Takefu Steel. Specifically, for the central sheet we used the carbonaceous V-Toku2 at 62 / 63HRC and the stainless SUS410 for the two external sheets, in order to guarantee a very high cutting, penetration and sealing capacity of the wire together with an ease of regrinding and maintenance but at the same time the blade has a remarkable resistance to corrosion and an important increase in resilience given by the type of foreign steel and the laminated structure.
URO model .:
Occupation: Tactical / Utility
Type of production: Artisan
Lama production: Italy
Blade: integral, in Japanese laminated steel (San Mai) with cutting edge in V-Toku2 (carbon) at 62 / 63HRC and external cheeks in SUS410 (stainless steel)
Blade finish: satin finish
Handle: Micarta
Blade length: 145mm.
Blade thickness: 6.5mm.
Total length: 300mm.
Balancing: backward
Weight: 436g.
Sheath: in black leather
Packaging: -
Notes: Each knife is unique and handcrafted - Wander Tactical certifiedAs in the ancient swords of the Japanese Samurai.
Rolled steel - imported into Italy from Collini Steel directly from the Japanese Takefu Steel - is based on the ancient Japanese tradition in the creation of the famous Samurai swords. Already in 1100 the expert Japanese blacksmiths in fact combined different materials to give the Katana swords incredible cutting capabilities combined with a resistance and flexibility previously unknown. It is thanks to this revolutionary construction technique that the swords from Samurai have been preserved to the present day becoming one of the most fascinating objects made by man. Following this tradition applied to modern metallurgy, we are now able to have technologically advanced steels already tested and used in cutlery also by famous brands such as Fallkniven, Cold Steel, Mcusta, Kai, Sog, Zwilling, Rockstead, etc.
Characteristics of San Mai steel: These are different types of metals bonded together to create a composite that encloses and intensifies the strengths of the metals taken individually:
- Longer tool life
thanks to the use of high quality steel with a high carbon content (VG10, CoS, Shiro) or sintered (SPG2), in the heart of the sheet (Core Steel), the blade once hardened, achieves hardness and cutting performance decidedly higher than those achieved with the use of traditional steels.- Greater resilience
built with the principle of Japanese swords, multilayer steel is difficult to break thanks to the toughness of the central steel (Core Steel) and the elasticity of the steel used for the lateral coating (Stainless Steel).- Better corrosion resistance
the steel used for the external layers (Stainless Steel) guarantees the blade a high resistance to corrosion. The combination of the two or more materials used by Takefu Steel generates, at the galvanic level, a structure that improves corrosion resistance even on the wire.- Easy processing even after heat treatment
although normally the steel becomes harder after hardening, the lateral steel used in multi-layer processing does not lose its softness and allows easy processing, drilling or welding even after heat treatment. For optimum performance of the blade, cryogenic treatment is recommended.- Improvement of the aesthetic result
The knives made with multistate steel or with a damask pattern at the end of the processing are aesthetically elegant, refined and highly appreciated by collectors all over the world.For more information: collinisteel
WT-UR-VT2-BR -
Wander Tactical - Uro knife - SanMai V-Toku2 & Brown Micarta - special custom
Japanese steel merges with Italian excellence
For this 2019/2020 collaboration, exclusive to Collini Cutlery, we have decided to offer a series of best sellers produced by Wander Tactical. Knives made with the famous San Mai steel produced by the Japanese Takefu Steel. Specifically, for the central sheet we used the carbonaceous V-Toku2 at 62 / 63HRC and the stainless SUS410 for the two external sheets, in order to guarantee a very high cutting, penetration and sealing capacity of the wire together with an ease of regrinding and maintenance but at the same time the blade has a remarkable resistance to corrosion and an important increase in resilience given by the type of foreign steel and the laminated structure.
URO model .:
Occupation: Tactical / Utility
Type of production: Artisan
Lama production: Italy
Blade: integral, in Japanese laminated steel (San Mai) with cutting edge in V-Toku2 (carbon) at 62 / 63HRC and external cheeks in SUS410 (stainless steel)
Blade finish: satin finish
Handle: Micarta
Blade length: 145mm.
Blade thickness: 6.5mm.
Total length: 300mm.
Balancing: backward
Weight: 436g.
Sheath: in black leather
Packaging: -
Notes: Each knife is unique and handcrafted - Wander Tactical certifiedAs in the ancient swords of the Japanese Samurai.
Rolled steel - imported into Italy from Collini Steel directly from the Japanese Takefu Steel - is based on the ancient Japanese tradition in the creation of the famous Samurai swords. Already in 1100 the expert Japanese blacksmiths in fact combined different materials to give the Katana swords incredible cutting capabilities combined with a resistance and flexibility previously unknown. It is thanks to this revolutionary construction technique that the swords from Samurai have been preserved to the present day becoming one of the most fascinating objects made by man. Following this tradition applied to modern metallurgy, we are now able to have technologically advanced steels already tested and used in cutlery also by famous brands such as Fallkniven, Cold Steel, Mcusta, Kai, Sog, Zwilling, Rockstead, etc.
Characteristics of San Mai steel: These are different types of metals bonded together to create a composite that encloses and intensifies the strengths of the metals taken individually:
- Longer tool life
thanks to the use of high quality steel with a high carbon content (VG10, CoS, Shiro) or sintered (SPG2), in the heart of the sheet (Core Steel), the blade once hardened, achieves hardness and cutting performance decidedly higher than those achieved with the use of traditional steels.- Greater resilience
built with the principle of Japanese swords, multilayer steel is difficult to break thanks to the toughness of the central steel (Core Steel) and the elasticity of the steel used for the lateral coating (Stainless Steel).- Better corrosion resistance
the steel used for the external layers (Stainless Steel) guarantees the blade a high resistance to corrosion. The combination of the two or more materials used by Takefu Steel generates, at the galvanic level, a structure that improves corrosion resistance even on the wire.- Easy processing even after heat treatment
although normally the steel becomes harder after hardening, the lateral steel used in multi-layer processing does not lose its softness and allows easy processing, drilling or welding even after heat treatment. For optimum performance of the blade, cryogenic treatment is recommended.- Improvement of the aesthetic result
The knives made with multistate steel or with a damask pattern at the end of the processing are aesthetically elegant, refined and highly appreciated by collectors all over the world.For more information: collinisteel
WT-UR-VT2BRS -
Wander Tactical - Uro knife - SanMai V-Toku2 & Black Micarta - special custom
Japanese steel merges with Italian excellence
For this 2019/2020 collaboration, exclusive to Collini Cutlery, we have decided to offer a series of best sellers produced by Wander Tactical. Knives made with the famous San Mai steel produced by the Japanese Takefu Steel. Specifically, for the central sheet we used the carbonaceous V-Toku2 at 62 / 63HRC and the stainless SUS410 for the two external sheets, in order to guarantee a very high cutting, penetration and sealing capacity of the wire together with an ease of regrinding and maintenance but at the same time the blade has a remarkable resistance to corrosion and an important increase in resilience given by the type of foreign steel and the laminated structure.
URO model .:
Occupation: Tactical / Utility
Type of production: Artisan
Lama production: Italy
Blade: integral, in Japanese laminated steel (San Mai) with cutting edge in V-Toku2 (carbon) at 62 / 63HRC and external cheeks in SUS410 (stainless steel)
Blade finish: satin finish
Handle: Micarta
Blade length: 145mm.
Blade thickness: 6.5mm.
Total length: 300mm.
Balancing: backward
Weight: 436g.
Sheath: in black leather
Packaging: -
Notes: Each knife is unique and handcrafted - Wander Tactical certifiedAs in the ancient swords of the Japanese Samurai.
Rolled steel - imported into Italy from Collini Steel directly from the Japanese Takefu Steel - is based on the ancient Japanese tradition in the creation of the famous Samurai swords. Already in 1100 the expert Japanese blacksmiths in fact combined different materials to give the Katana swords incredible cutting capabilities combined with a resistance and flexibility previously unknown. It is thanks to this revolutionary construction technique that the swords from Samurai have been preserved to the present day becoming one of the most fascinating objects made by man. Following this tradition applied to modern metallurgy, we are now able to have technologically advanced steels already tested and used in cutlery also by famous brands such as Fallkniven, Cold Steel, Mcusta, Kai, Sog, Zwilling, Rockstead, etc.
Characteristics of San Mai steel: These are different types of metals bonded together to create a composite that encloses and intensifies the strengths of the metals taken individually:
- Longer tool life
thanks to the use of high quality steel with a high carbon content (VG10, CoS, Shiro) or sintered (SPG2), in the heart of the sheet (Core Steel), the blade once hardened, achieves hardness and cutting performance decidedly higher than those achieved with the use of traditional steels.- Greater resilience
built with the principle of Japanese swords, multilayer steel is difficult to break thanks to the toughness of the central steel (Core Steel) and the elasticity of the steel used for the lateral coating (Stainless Steel).- Better corrosion resistance
the steel used for the external layers (Stainless Steel) guarantees the blade a high resistance to corrosion. The combination of the two or more materials used by Takefu Steel generates, at the galvanic level, a structure that improves corrosion resistance even on the wire.- Easy processing even after heat treatment
although normally the steel becomes harder after hardening, the lateral steel used in multi-layer processing does not lose its softness and allows easy processing, drilling or welding even after heat treatment. For optimum performance of the blade, cryogenic treatment is recommended.- Improvement of the aesthetic result
The knives made with multistate steel or with a damask pattern at the end of the processing are aesthetically elegant, refined and highly appreciated by collectors all over the world.For more information: collinisteel
WT-UR-VT2BS -
Wander Tactical - Uro knife - SanMai V-Toku2 & Black Micarta - custom knife
Japanese steel merges with Italian excellence
For this 2019/2020 collaboration, exclusive to Collini Cutlery, we have decided to offer a series of best sellers produced by Wander Tactical. Knives made with the famous San Mai steel produced by the Japanese Takefu Steel. Specifically, for the central sheet we used the carbonaceous V-Toku2 at 62 / 63HRC and the stainless SUS410 for the two external sheets, in order to guarantee a very high cutting, penetration and sealing capacity of the wire together with an ease of regrinding and maintenance but at the same time the blade has a remarkable resistance to corrosion and an important increase in resilience given by the type of foreign steel and the laminated structure.
URO model .:
Occupation: Tactical / Utility
Type of production: Artisan
Lama production: Italy
Blade: integral, in Japanese laminated steel (San Mai) with cutting edge in V-Toku2 (carbon) at 62 / 63HRC and external cheeks in SUS410 (stainless steel)
Blade finish: satin finish
Handle: Micarta
Blade length: 145mm.
Blade thickness: 6.5mm.
Total length: 300mm.
Balancing: backward
Weight: 436g.
Sheath: in black leather
Packaging: -
Notes: Each knife is unique and handcrafted - Wander Tactical certifiedAs in the ancient swords of the Japanese Samurai.
Rolled steel - imported into Italy from Collini Steel directly from the Japanese Takefu Steel - is based on the ancient Japanese tradition in the creation of the famous Samurai swords. Already in 1100 the expert Japanese blacksmiths in fact combined different materials to give the Katana swords incredible cutting capabilities combined with a resistance and flexibility previously unknown. It is thanks to this revolutionary construction technique that the swords from Samurai have been preserved to the present day becoming one of the most fascinating objects made by man. Following this tradition applied to modern metallurgy, we are now able to have technologically advanced steels already tested and used in cutlery also by famous brands such as Fallkniven, Cold Steel, Mcusta, Kai, Sog, Zwilling, Rockstead, etc.
Characteristics of San Mai steel: These are different types of metals bonded together to create a composite that encloses and intensifies the strengths of the metals taken individually:
- Longer tool life
thanks to the use of high quality steel with a high carbon content (VG10, CoS, Shiro) or sintered (SPG2), in the heart of the sheet (Core Steel), the blade once hardened, achieves hardness and cutting performance decidedly higher than those achieved with the use of traditional steels.- Greater resilience
built with the principle of Japanese swords, multilayer steel is difficult to break thanks to the toughness of the central steel (Core Steel) and the elasticity of the steel used for the lateral coating (Stainless Steel).- Better corrosion resistance
the steel used for the external layers (Stainless Steel) guarantees the blade a high resistance to corrosion. The combination of the two or more materials used by Takefu Steel generates, at the galvanic level, a structure that improves corrosion resistance even on the wire.- Easy processing even after heat treatment
although normally the steel becomes harder after hardening, the lateral steel used in multi-layer processing does not lose its softness and allows easy processing, drilling or welding even after heat treatment. For optimum performance of the blade, cryogenic treatment is recommended.- Improvement of the aesthetic result
The knives made with multistate steel or with a damask pattern at the end of the processing are aesthetically elegant, refined and highly appreciated by collectors all over the world.For more information: collinisteel
WT-UR-VT2B -
Wander Tactical - Haast Eagle knife - SanMai V-Toku2 & Black Micarta - Unique piece
Japanese steel merges with Italian excellence
For this 2019/2020 collaboration, exclusive to Collini Cutlery, we have decided to offer a series of best sellers produced by Wander Tactical. Knives made with the famous San Mai steel produced by the Japanese Takefu Steel. Specifically, for the central sheet we used the carbonaceous V-Toku2 at 62 / 63HRC and the stainless SUS410 for the two external sheets, in order to guarantee a very high cutting, penetration and sealing capacity of the wire together with an ease of regrinding and maintenance but at the same time the blade has a remarkable resistance to corrosion and an important increase in resilience given by the type of foreign steel and the laminated structure.
Haast Eagle model .: unique piece.
Occupation: Tactical / Utility
Type of production: Artisan
Lama production: Italy
Blade: integral, in Japanese laminated steel (San Mai) with cutting edge in V-Toku2 (carbon) at 62 / 63HRC and external cheeks in SUS410 (stainless steel)
Blade finish: satin finish
Handle: Micarta
Blade length: 135mm.
Blade thickness: 6.5mm.
Total length: 285mm.
Balancing: backward
Weight: 378g.
Sheath: in black leather
Packaging: -
Notes: Each knife is unique and handcrafted - Wander Tactical certifiedAs in the ancient swords of the Japanese Samurai.
Rolled steel - imported into Italy from Collini Steel directly from the Japanese Takefu Steel - is based on the ancient Japanese tradition in the creation of the famous Samurai swords. Already in 1100 the expert Japanese blacksmiths in fact combined different materials to give the Katana swords incredible cutting capabilities combined with a resistance and flexibility previously unknown. It is thanks to this revolutionary construction technique that the swords from Samurai have been preserved to the present day becoming one of the most fascinating objects made by man. Following this tradition applied to modern metallurgy, we are now able to have technologically advanced steels already tested and used in cutlery also by famous brands such as Fallkniven, Cold Steel, Mcusta, Kai, Sog, Zwilling, Rockstead, etc.
Characteristics of San Mai steel: These are different types of metals bonded together to create a composite that encloses and intensifies the strengths of the metals taken individually:
- Longer tool life
thanks to the use of high quality steel with a high carbon content (VG10, CoS, Shiro) or sintered (SPG2), in the heart of the sheet (Core Steel), the blade once hardened, achieves hardness and cutting performance decidedly higher than those achieved with the use of traditional steels.- Greater resilience
built with the principle of Japanese swords, multilayer steel is difficult to break thanks to the toughness of the central steel (Core Steel) and the elasticity of the steel used for the lateral coating (Stainless Steel).- Better corrosion resistance
the steel used for the external layers (Stainless Steel) guarantees the blade a high resistance to corrosion. The combination of the two or more materials used by Takefu Steel generates, at the galvanic level, a structure that improves the corrosion resistance also on the wire.- Easy processing even after heat treatment
although normally the steel becomes harder after hardening, the lateral steel used in multi-layer processing does not lose its softness and allows easy processing, drilling or welding even after heat treatment. For optimum performance of the blade, cryogenic treatment is recommended.- Improvement of the aesthetic result
The knives made with multistate steel or with a damask pattern at the end of the processing are aesthetically elegant, refined and highly appreciated by collectors all over the world.For more information: collinisteel
Send feedback
History
Saved
CommunityWT-HE-VT2 -
Wander Tactical - Scrambler - Satin sanmai Cos & Brown Micarta - custom knife
In collaboration with "Wander Tactical" We decided to bring their EDC, the Scrambler model, in an exclusive satin-blade version that uses the famous Japanese Steel San Mai produced by Takefu Steel. Specifically, we used, for the central plate, the CoS to 61,5HRC (Cobalt Special, considered mechanically superior by 25% compared to the already much appreciated VG10) and 420J2 (56 HRC) for the two side plates in order to ensure high cutting capacity, but at the same time a remarkable resistance to abrasion, resilience and resistance to oxidation.
Occupation: EDC / Light Utility / All Round
Type of production: Custom
Country of production: Italy
Blade: Full, Japanese-rolled stainless steel (San Mai) with sharp CoS to 61,5HRC in cryogenic tempering
Blade treatment: Satin Raw
Handle: Micarta
Blade length: 82mm.
Blade thickness: 6.8mm.
Overall length: 200mm.
Balancing: backward
Weight: 215g.
Sheath: Kydex, compatible with tek-lok attacks (not supplied) or used as a neck knife
Packaging: -
Notes: Each knife is unique and handmade; may be slight of finishes, colors and material differences with respect to the photographed product.WT-T2-RMB -
Wander Tactical - Smilodon Satin SanMai CoS & Black Green Micarta - craft knife
In collaboration with Wander Tactical we have decided to propose their heavy duty, the Smilodon model, in an exclusive satin blade version that uses the famous Japanese steel San Mai produced by Takefu Steel. Specifically, for the central plate we used the 61.5HRC CoS (Cobalt Special, mechanically considered 25% higher than the already highly appreciated VG10) and the 420J2 (at 56 HRC) for the two side plates in order to guarantee a very high cutting capacity, but at the same time a remarkable resistance to abrasion, resilience and oxidation resistance.
Type of production: Artisan
Lama production: Italy
Blade: integral, in Japanese rolled stainless steel (San Mai) with 61.5HRC CoS cutting in cryogenic quenching
Blade treatment: satin
Handle: Micarta
Blade length: 180mm.
Blade thickness: 6.5mm.
Total length: 340mm.
Balancing: set back
Weight: 605g.
Sheath: Kydex, thermoformed, with Tek-Lok type connection
Package: -
Notes: unique and exclusive piece.WT-T2-SMB -
Bob Dozier - Dagger Liner Lock Folder D2 Steel - Titanium - custom knife
Rare knife handcrafted by Bob Dozier in 2001, made of D2 steel with sandblasted titanium handle and anodized details.
Intended use: Collection
Type of production: handmade
Country of production: USA
Blade: in D2 steel at 61HRC
Blade treatment: satin finish
Handle: in titanium with anodized details
Blade length: 105mm.
Blade thickness: 4mm.
Closed length: 135mm.
Total length: 250mm.
Weight: 170g.
Closure: Liner Lock
Clip: titanium, removable
Notes: made entirely by hand by Bob Dozier in 2001Dozier-SP€0.00Only -20 leftOut of stock -
Wander Tactical - Kobura Kiridashi Knife Green - by TheFence - Limited Edition
Kiridashi knife designed by TheFence and handcrafted by Wander Tactical - Limited edition of 50 pieces
Use: EDC / Light Utility / All Round
Type of production: Artisan
Country of production: Italy
Blade: integral, in D2 steel at 59 / 61HRC
Blade treatment: Raw Finish
Handle: Paracord
Blade length: 60mm.
Blade thickness: 6.5mm.
Total length: 155mm.
Balancing: set back
Weight: 50g.
Sheath: in Kydex, thermoformed
Design: by Claudio Colombo of TheFence
Notes: Each knife is unique and handcrafted; there may be slight differences in finishes, compared to the photographed product - Limited edition of 50 piecesReview by Alessandra De Santi
From collector to author of reviews, to designers: the step was short for Claudio Colombo who, in a short time, decided to put his passion and experience to use by designing his own knife, the Kobura.
Inspired by the kiridashi, the Kobura (cobra in Japanese) revisits the essential lines of what was originally a typical Japanese instrument used to carve wood, but also a small daily utility knife used (especially by children) to tip pencils , cut paper, ropes, etc.The Kobura, an EDC with an aggressive and appealing appearance, is made of D2 steel hardened to 59-61 HRC; the knife is equipped with a short chisel blade (61 mm) and extremely robust (thickness 5.5 mm). On the back there is a practical anti-slip knurling for the thumb. On the side without bevel is the Valknut, a Norse symbol used as the logo of TheFence.
TheFence is a team of shooting instructors with different specialties and experiences. Claudio attended courses with Rob Pincus (of which he is one of the two instructors in Italy), Gabriel Suarez and Scott Reitz (formerly L.A. Swat and instructor); one of the partners is an Active Shooters Response instructor, and another one has deepened Israeli techniques.
WT-KOBURA-G -
Wander Tactical - Kobura Kiridashi Knife Black - by TheFence - Limited Edition
Kiridashi knife designed by TheFence and handcrafted by Wander Tactical - Limited edition of 50 pieces
Use: EDC / Light Utility / All Round
Type of production: Artisan
Country of production: Italy
Blade: integral, in D2 steel at 59 / 61HRC
Blade treatment: Raw Finish
Handle: Paracord
Blade length: 60mm.
Blade thickness: 6.5mm.
Total length: 155mm.
Balancing: set back
Weight: 50g.
Sheath: in Kydex, thermoformed
Design: by Claudio Colombo of TheFence
Notes: Each knife is unique and handcrafted; there may be slight differences in finishes, compared to the photographed product - Limited edition of 50 piecesReview by Alessandra De Santi
From collector to author of reviews, to designers: the step was short for Claudio Colombo who, in a short time, decided to put his passion and experience to use by designing his own knife, the Kobura.
Inspired by the kiridashi, the Kobura (cobra in Japanese) revisits the essential lines of what was originally a typical Japanese instrument used to carve wood, but also a small daily utility knife used (especially by children) to tip pencils , cut paper, ropes, etc.The Kobura, an EDC with an aggressive and appealing appearance, is made of D2 steel hardened to 59-61 HRC; the knife is equipped with a short chisel blade (61 mm) and extremely robust (thickness 5.5 mm). On the back there is a practical anti-slip knurling for the thumb. On the side without bevel is the Valknut, a Norse symbol used as the logo of TheFence.
TheFence is a team of shooting instructors with different specialties and experiences. Claudio attended courses with Rob Pincus (of which he is one of the two instructors in Italy), Gabriel Suarez and Scott Reitz (formerly L.A. Swat and instructor); one of the partners is an Active Shooters Response instructor, and another one has deepened Israeli techniques.
WT-KOBURA-B -
Wander Tactical - Hurricane Folder knife III Generation - Black Aluminum - folding knife
Intended use: Heavy Duty / Hiking / Tactical / Collection
Type of production: industrial
Country of production: Italy
Blade: in D2 steel at 59 / 61HRC with cryogenic tempering
Blade treatment: Stonwash
Handle: titanium folders with aluminum handle
Blade length: 90mm.
Blade thickness: 5mm.
Closed length: 120mm.
Total length: 210mm.
Thick when closed: 13.6mm.
Balancing: -
Weight: 160g.
Opening: Carson Flipper system / ambidextrous opening pins on the blade
Washers: in steel, with ball bearings made in Japan
Closing: Rockers Arm 8.11
Clip: titanium, removable and reversible
Sheath: -
Packaging: Plastic case with Wander Tactical logos
Notes: 3rd generation 2019 productionWT-H3-SW -
Wander Tactical - Mistral Folder knife III Generation - Black Aluminum - folding knife
Intended use: Heavy Duty / Hiking / Tactical / Collection
Type of production: industrial
Country of production: Italy
Blade: in D2 steel at 59 / 61HRC with cryogenic tempering
Blade treatment: Stonwash
Handle: titanium folders with aluminum handle
Blade length: 90mm.
Blade thickness: 5mm.
Closed length: 120mm.
Total length: 210mm.
Thick when closed: 13.6mm.
Balancing: -
Weight: 160g.
Opening: Carson Flipper system / ambidextrous opening pins on the blade
Washers: in steel, with ball bearings made in Japan
Closing: Rockers Arm 8.11
Clip: titanium, removable and reversible
Sheath: -
Packaging: Plastic case with Wander Tactical logos
Notes: 3rd generation 2019 productionWT-M3-SW -
Hydra Armaments - Hecate knife tactical stonewashed - craft knife
Type of production: Artisan
Lama production: Italy
Blade: integral, D2 (59-61 HRC) with cryogenic treatment
Blade treatment: satin
Handle: G10 with 3D texture
Blade length: 140mm.
Blade thickness: 6mm.
Total length: 280mm.
Balancing: set back
Weight: 425g.
Sheath: Kydex with belt attachment and MOLLE clip attachment
Package: -
Notes: limited series of 40 pieces.HA-HED2SW€0.00Only -99 leftOut of stock -
Wander Tactical - Mini Bad Medicine knife - Satin & Green Paracord - Limited Edition
Use: EDC / Light Utility / All Round
Type of production: Artisan
Country of production: Italy
Blade: integral, in steel D2 at 59 / 61HRC
Blade treatment: -
Handle: Paracord
Blade length: 97mm.
Blade thickness: 6.5mm.
Total length: 204mm.
Balancing: set back
Weight: 170g.
Sheath: in Kydex, thermoformed, with tek-lok type connection
Package: -
Notes: Limited edition single pieceWT-MBM -
Wander Tactical - Raptor - Satin CoS SanMai & Green Paracord - custom knife
In collaboration with Wander Tactical we decided to propose their new neck knife, the Raptor, in an exclusive satin-blade version that uses the famous SanMai japanese steel produced by Takefu Steel. For the central plate we have chose the CoS with 61,5HRC (Cobalt Special, considered mechanically superior by 25% compared to the already much appreciated VG10) and 420J2 with 56 HRC for the two side plates in order to ensure high cutting capacity but at the same time a remarkable resistance to abrasion, resilience and resistance to oxidation.
Use: Neck Knife / Collection
Type of production: handmade
Production Country: Italy
Blade: Full tang with japanese laminated (SanMai) 61.5HRC CoS stainless steel with cryogenic temper
Blade treatment: Satin
Handle: Paracord
Blade length: 80mm.
Blade thickness: 6.5mm.
Overall length: 175mm.
Balancing: backward
Weight: 156g.
Sheath: Kydex, thermoformed, for use with lanyard Neck Knife
Packaging: -
Notes: Each knife is unique and handmade; may be slight of finishes, colors and material differences with respect to the photographed product.WT-RP-SM -
Wander Tactical - Compound Scrambler - Raw Finish & Desert Micarta - craft knife
Use: EDC / Light Utility / All Round
Type of production: Artisan
Country of production: Italy
Blade: integral, in steel D2 at 59 / 61HRC
Blade treatment: Raw Finish and satin
Handle: Micarta
Blade length: 90mm.
Blade thickness: 6.5mm.
Total length: 203mm.
Balancing: set back
Weight: 230g.
Sheath: Kydex, thermoformed, compatible with tek-lok attachments (not supplied) or usable as neck knife
Package: -
Notes: This model is unique and handcraftedWT-SC-C -
Wander Tactical - Hurricane Lava Flow Custom - Bronze Finish and G10 Jade - folding knife
Single piece custom version of the standard Hurricane model - blade, folders, clips and screws modified by hand by the Wander Tactical knife designer Dino Picco - The finish of the "Bronze" blade is obtained through a natural oxidation process that takes place at the end of the hardening phase cryogenic.
Type of production: semi-industrial
Lama production: Italy
Blade: in steel D2 at 59 / 60HRC
Lama treatment: Bronze flow
Manicure: Aluminum (alluminium)
Blade length: 90mm.
Blade thickness: 5mm.
Total length: 215mm.
Balancing: set back
Weight: 187g.
Package: -
Notes: clip, blade lock Rockers Arm 8.11 - safety pinWT-HU-C -
Wander Tactical - Tryceratops Satin D2 & Micarta Black - custom knife
Wander Tactical - Tryceratops Earth & Desert Micarta - custom knife
Intended use: Tactical / Collection
Type of production: Artisan
Production Lama: Italy
Blade: Stainless D2 59 / 60HRC
Treatment Lama: -
Handle: Micarta
Blade length: 65 mm.
Blade thickness: 5.5 mm.
Overall length: 132 mm.
Balancing: back
Weight: 176 g.
Sheath: Artisan, Kydex black with tek-Lok
Packaging: -
Notes: every knife is unique as it is handmade, might therefore be small differences / inaccuracies with respect to the photographed model, also with regard to colors of blade and handle.WT-T-B -
Erapuu Antler - Pocket Finland knife - knife
Finnish artisan knife.
These knives are a perfect combination of tradition and construction quality.
Intended use: Hunting / Sports
Type of production: artisan
Blade: 59HRC carbon steel
Lama production: Finland
Handle: bone
Blade length: 55mm.
Blade thickness: 2mm.
Total length: 125mm.
Balancing: on the guard branch
Weight: 62g.
Sheath: in bone
Note:14553€53.28Out of stock -
Wander Tactical - Smilodon Satin SanMai CoS & Black Green Micarta - craft knife
In collaboration with Wander Tactical we have decided to propose their heavy duty, the Smilodon model, in an exclusive satin blade version that uses the famous Japanese steel San Mai produced by Takefu Steel. Specifically, for the central plate we used the 61.5HRC CoS (Cobalt Special, mechanically considered 25% higher than the already highly appreciated VG10) and the 420J2 (at 56 HRC) for the two side plates in order to guarantee a very high cutting capacity, but at the same time a remarkable resistance to abrasion, resilience and oxidation resistance.
Type of production: Artisan
Lama production: Italy
Blade: integral, in Japanese rolled stainless steel (San Mai) with 61.5HRC CoS cutting in cryogenic quenching
Blade treatment: satin
Handle: Micarta
Blade length: 180mm.
Blade thickness: 6.5mm.
Total length: 340mm.
Balancing: set back
Weight: 605g.
Sheath: Kydex, thermoformed, with Tek-Lok type connection
Package: -
Notes: unique and exclusive piece.WT-SM-SM -
Wander Tactical - Tryceratops - SanMai CoS & Green Micarta - custom knife
In collaboration with Wander Tactical we decided to propose one of their most iconic knives, the Tryceratops model, in an exclusive satin-blade version that uses the famous Japanese Steel San Mai produced by Takefu Steel. Specifically, we used, for the central plate, the CoS to 61,5HRC (Cobalt Special, considered mechanically superior by 25% compared to the already much appreciated VG10) and 420J2 (56 HRC) for the two side plates in order to ensure high cutting capacity, but at the same time a remarkable resistance to abrasion, resilience and resistance to oxidation.
Application: outdoor / hunting
Type of production: handmade
Production Country: Italy
Blade: Full, Japanese-rolled stainless steel (San Mai) with sharp CoS to 61,5HRC in cryogenic tempering
Blade treatment: Satin
Handle: Micarta
Blade length: 70mm.
Blade thickness: 6.8mm.
Overall length: 130mm.
Balancing: backward
Weight: 210g.
Sheath: Kydex, thermoformed, with Tek-Lok system
Packaging: -
Notes: Each knife is unique and handmade; may be slight of finishes, colors and material differences with respect to the photographed product.COS-TR-GM -
Wander Tactical - Freedom - Satin SanMai CoS & Black Green Micarta - craft knife
In collaboration with Tactical Wander we decided to bring them light utility, the Lynx model, in an exclusive satin-blade version that uses the famous Japanese Steel San Mai produced by Takefu Steel. Specifically, we used, for the central plate, the CoS to 61,5HRC (Cobalt Special, considered mechanically superior by 25% compared to the already much appreciated VG10) and 420J2 (56 HRC) for the two side plates in order to ensure high cutting capacity, but at the same time a remarkable resistance to abrasion, resilience and resistance to oxidation.
Application: Light Utility / All Round
Type of production: Artisan
Lama production: Italy
Blade: integral, in Japanese rolled stainless steel (San Mai) with 61.5HRC CoS cutting in cryogenic quenching
Lama treatment: Satin
Handle: Micarta
Blade length: 120mm.
Blade thickness: 6.8mm.
Total length: 245mm.
Balancing: set back
Weight: 366g.
Sheath: Kydex, thermoformed, with Tek-Lok type connection
Package: -
Notes: unique and exclusive piece.WT-FREE-SM -
Wander Tactical - Barracuda - Satin & Desert Micarta - Limited Edition
Knife born from the collaboration between Wander Tactical and Safer Faster Defense
Use: EDC / Light Utility / All Round
Type of production: Artisan
Country of production: Italy
Blade: integral, in steel D2 at 59 / 61HRC
Blade treatment: -
Handle: Micarta
Blade length: 100mm.
Blade thickness: 6.5mm.
Total length: 200mm.
Balancing: set back
Weight: 235g.
Sheath: Kydex, thermoformed, with tek-lok attachment
Package: -
Notes: Each knife is unique and handcrafted; there may be slight differences in finishes, colors and materials compared to the product photographed - Limited edition of 5 piecesWT-BARR -
Wander Tactical - Raptor - Satin CoS SanMai & Green Paracord - custom knife
In collaboration with Wander Tactical we decided to propose their new neck knife, the Raptor, in an exclusive satin-blade version that uses the famous SanMai japanese steel produced by Takefu Steel. For the central plate we have chose the CoS with 61,5HRC (Cobalt Special, considered mechanically superior by 25% compared to the already much appreciated VG10) and 420J2 with 56 HRC for the two side plates in order to ensure high cutting capacity but at the same time a remarkable resistance to abrasion, resilience and resistance to oxidation.
Use: Neck Knife / Collection
Type of production: handmade
Production Country: Italy
Blade: Full tang with japanese laminated (SanMai) 61.5HRC CoS stainless steel with cryogenic temper
Blade treatment: Satin
Handle: Paracord
Blade length: 80mm.
Blade thickness: 6.5mm.
Overall length: 175mm.
Balancing: backward
Weight: 156g.
Sheath: Kydex, thermoformed, for use with lanyard Neck Knife
Packaging: -
Notes: Each knife is unique and handmade; may be slight of finishes, colors and material differences with respect to the photographed product.WT-COS-RA-O -
Wander Tactical - Scrambler - Satin SanMai Cos & Gray Paracord - custom knife
In collaboration with "Wander Tactical" We decided to bring their EDC, the Scrambler model, in an exclusive satin-blade version that uses the famous Japanese Steel San Mai produced by Takefu Steel. Specifically, we used, for the central plate, the CoS to 61,5HRC (Cobalt Special, considered mechanically superior by 25% compared to the already much appreciated VG10) and 420J2 (56 HRC) for the two side plates in order to ensure high cutting capacity, but at the same time a remarkable resistance to abrasion, resilience and resistance to oxidation.
Occupation: EDC / Light Utility / All Round
Type of production: Custom
Country of production: Italy
Blade: Full, Japanese-rolled stainless steel (San Mai) with sharp CoS to 61,5HRC in cryogenic tempering
Blade treatment: Satin Raw
Handle: Paracord
Blade length: 82mm.
Blade thickness: 6.8mm.
Overall length: 200mm.
Balancing: backward
Weight: 215g.
Sheath: Kydex, compatible with tek-lok attacks (not supplied) or used as a neck knife
Packaging: -
Notes: Each knife is unique and handmade; may be slight of finishes, colors and material differences with respect to the photographed product.WT-SC-PA -
Wander Tactical - Scrambler - Satin SanMai Cos & Blue Micarta - craft knife
In collaboration with "Wander Tactical" We decided to bring their EDC, the Scrambler model, in an exclusive satin-blade version that uses the famous Japanese Steel San Mai produced by Takefu Steel. Specifically, we used, for the central plate, the CoS to 61,5HRC (Cobalt Special, considered mechanically superior by 25% compared to the already much appreciated VG10) and 420J2 (56 HRC) for the two side plates in order to ensure high cutting capacity, but at the same time a remarkable resistance to abrasion, resilience and resistance to oxidation.
Use: EDC / Light Utility / All Round
Type of production: Artisan
Lama production: Italy
Blade: integral, Japanese rolled stainless steel (San Mai) with 61.5HRC Crystalline-hardened CoS cutting edge
Lama treatment: Raw Satin
Handle: Paracord
Lam length: 90mm.
Blade thickness: 6.8mm.
Total length: 203mm.
Balancing: set back
Weight: 240g.
Sheath: Kydex, thermoformed, compatible with tek-lok attachments (not supplied) or usable as neck knife
Package: -
Notes: Each knife is unique and handcrafted; there may be slight differences in finishes, colors and materials compared to the photographed product.WT-SC-BL -
Wander Tactical - Raptor Bronze GunKote & Coyote Paracord - craft knife
Use: Neck Knife / Collection
Type of production: Artisan
Blade production: Italy
Blade: integral, D2 steel
Blade Treatment: Bronze GunKote
Manicure: Paracord
Blade Length: 80mm.
Blade thickness: 6.5mm.
Total Length: 175mm.
Balancing: backward
Weight: 156g.
Sheath: Kydex, thermoformed, with cord for use with Neck Knife
Packing: -
Notes: Each knife is unique and handcrafted; There may be differences in finishes, colors and materials compared to the photographed productWT-R-DP -
Wander Tactical - Scrambler - Raw Finish & Black Micarta - custom knife
Use: EDC / Light Utility / All Round
Type of production: Artisan
Country of production: Italy
Blade: integral, D2 steel to 59 / 61HRC
Blade Treatment: Raw Finish
Manicure: Micarta
Blade Length: 82mm.
Blade thickness: 5mm.
Total length: 200mm.
Balance: backward
Weight: 205g.
Sheath: in Kydex, thermoformed, compatible with tek-lok attachments (not supplied) or usable as neck knife
Packing: -
Notes: Each knife is unique and handcrafted; There may be differences in finishes, colors and materials compared to the photographed productWT-12658 -
Wander Tactical - Scrambler - Raw Finish & Night Blue Micarta - custom knife
Occupation: EDC / Light Utility / All Round
Type of production: Handcrafted
Production Country: Italy
Blade: integral, steel D2 59 / 61HRC
Blade treatment: Raw Finish
Handle: Micarta
Blade length: 82mm.
Blade thickness: 6.5mm.
Overall length: 200mm.
Balancing: backward
Weight: 235g.
Sheath: Kydex, thermally compatible with tek-lok attacks (not supplied) or used as a neck knife
Packaging: -
Notes: Each knife is unique and handmade; may be slight differences of finishes, colors and materials from product photographed12654 -
Wander Tactical - Raptor - Satin CoS SanMai & Green Paracord - custom knife
In collaboration with Wander Tactical we decided to propose their new neck knife, the Raptor, in an exclusive satin-blade version that uses the famous SanMai japanese steel produced by Takefu Steel. For the central plate we have chose the CoS with 61,5HRC (Cobalt Special, considered mechanically superior by 25% compared to the already much appreciated VG10) and 420J2 with 56 HRC for the two side plates in order to ensure high cutting capacity but at the same time a remarkable resistance to abrasion, resilience and resistance to oxidation.
Use: Neck Knife / Collection
Type of production: handmade
Production Country: Italy
Blade: Full tang with japanese laminated (SanMai) 61.5HRC CoS stainless steel with cryogenic temper
Blade treatment: Satin
Handle: Paracord
Blade length: 80mm.
Blade thickness: 6.5mm.
Overall length: 175mm.
Balancing: backward
Weight: 156g.
Sheath: Kydex, thermoformed, for use with lanyard Neck Knife
Packaging: -
Notes: Each knife is unique and handmade; may be slight of finishes, colors and material differences with respect to the photographed product.WT-COS-RA-W