Knives, collection knife, tactical knives, outdoor knives, pocket knives and tools
-
Fallkniven - F1 Pro Knife Survival Kit - USED - PRIVATE COLLECTION - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously purchased and used in hiking phase.
* Condition: Used and resharpened, well maintained, with no particular damage or structural defects
* Commercially available: Discontinued and no longer commercially available.
* Sharpening: Re-sharpened
* Marks on blade: Signs of use.
* Marks on handle: Signs of use.
* Box: Present and complete, with DC4 sharpener used
* Scabbard: Present and in excellent condition.
* Manuals, Certificates and Warranties: -.
* Checked and Certified by our in-house laboratory
Intended Use: Hiking / All round utilityBlade: hidden tang, CoS rolled stainless steel at 60HRC
Handle: Thermorun, with stainless steel guard
Blade length: 100mm.
Blade thickness: 7mm.
Total length: 215mm.
Balance: advanced to 0.5cm. from the lower guard branch
Weight: 178g.
Sheath: zytel
Notes: discontinued knife, previously purchased and used - cardboard box with Fallkniven logos, watertight ABS case with Fallkniven logos, used Fallkniven DC4 sharpening stone, accompanied by leather caseF-F1PRO-CP -
Fallkniven - F1 Wolf - VG-10W Laminated and Leather Sheath - knife
New "Wolf" version using a steel enriched with 1.25% Tungsten (also known as Wolfram in chemistry) which makes the edge tougher, more resilient and provides greater sharpness retention.
Intended use: tactical/military/huntingBlade: full tang in San-Mai VG-10Wolf / 420J2 59HRC stainless steel
Handle: Thermorun E
Blade length: 105mm.
Blade thickness: 4.5mm.
Total length: 215mm.
Balance: set back 2.5cm from the lower guard branch.
Weight: 150g.
Sheath: leather
Notes: official knife of Swedish Air Force pilots since 1995.F-F1LW -
Fallkniven - F1xB Utility Knife - Elmax Steel - Tungsten Carbide Finish - knife
Intended use: Hiking / Hunting
Production type: industrial
Country of Production: Japan
Blade: full tang, stainless steel Elmax at 61/62HRC
Blade finishing: black coating (Tungsten Carbide)
Handle: Thermorun
Blade Length: 100mm.
Blade thickness: 5mm.
Total length: 220mm.
Balance: set back 2cm. from the guard branch
Weight: 222g.
Scabbard: in zytel, for vertical carrying, with additional safety.
Notes: -F-F1XBElmax -
Fallkniven - F1x Utility Knife - Elmax Steel - knife
Intended use: Hiking / Hunting
Production type: industrial
Country of production: Japan
Blade: full tang, made of Elmax stainless steel at 61/62HRC
Blade finishing: satin finish
Handle: Thermorun
Blade length: 100mm.
Blade thickness: 5mm.
Total length: 220mm.
Balance: set back 2cm. from the guard branch
Weight: 222g.
Scabbard: in zytel, for vertical carrying, with additional safety.
Notes: -F-F1XElmax -
Fallkniven - FDC - Double sharpener - diamond (25 microns) and ceramic (9 microns) - sharpening accessory
Support with two different bars, one in ceramic and one in diamond.
The yellow diamond sharpening stone (25 microns) is used to make a fine sharpening, with the white ceramic stone (9 microns) the edge of the knife is polished in order to obtain a razor-sharp edge.
For cleaning, use some dish soap and hot water.
Dimensions of the diamond / ceramic part:
10 cm x 2 cm
Total size open with plastic handle:
22 cm
Closed size:
12 cm x 3 cm
Weight: 65 gr
F-FDC -
Fallkniven - FDD - Double diamond sharpener - 25 and 44 microns - sharpening accessory
Diamond sharpening with two different sharpening grits.
The yellow surface consists of titanium and aluminum nitride which greatly prolongs the life of the sharpener. The rough side (44 microns) is used to recover more damaged cutting edges, while the fine side (25 microns) is used for precision sharpening.
For cleaning, use dish soap and warm water.
Like all diamond sharpeners, this whetstone is a little rough at first, but gets smoother after a period of use.
Dimensions of the diamond part:
10 cm x 2 cmTotal open size with plastic handle:
22 cmClosed size:
12 cm x 3 cm
Weight: 67 grF-FDD -
Fallkniven - PXLey Folding Knife - Elmax - Elforyn - knife
Intended Use: Sporting/Collection
Production type: Industrial
Country of Production: Japan
Blade: Elmax stainless steel at 62HRC
Blade finish: Satin finish
Handle: Elforyn with stainless steel heads
Blade length: 88mm.
Blade thickness: 3.5mm.
Length closed 111mm.
Total lenght: 199mm.
Thickness when closed: 24mm.
Weight: 182g.
Closure: Liner Lock
Clip: stainless steel, removable
Package: cardboard box with Fallkniven logos
Notes: new 2021 version in Elmax steelF-PXLey -
Fallkniven - PXLbl Folding Knife - Elmax - Black Micarta - knife
Intended Use: Sporting/Collection
Production type: Industrial
Country of Production: Japan
Blade: Elmax stainless steel at 62HRC
Blade finish: Satin finish
Handle: Micarta with stainless steel heads
Blade length: 88mm.
Blade thickness: 3.5mm.
Length closed 111mm.
Total lenght: 199mm.
Thickness when closed: 24mm.
Weight: 182g.
Closure: Liner Lock
Clip: stainless steel, removable
Package: cardboard box with Fallkniven logos
Notes: new 2021 version in Elmax steelF-PXLbm -
Fallkniven - P3Gic Folding Knife - Desert Ironwood - knife
Intended use: sporting
Type of production: industrial
Blade: Three layers rolled 3G steel (VG2 and SGPS at 62 HRC)
Blade finish: Satin finish
Country of Production: Japan
Handle: Stainless Steel 420J2 and Wood
Blade Length: 77mm.
Blade thickness: 3mm.
Length closed: 103mm.
Total length: 180mm.
Weight: 75g.
Closure: Liner Lock
Clip: Absent
Sheath: Nylon, with Velcro closure
Notes: -F-P3Gic -
Fallkniven - RL1EY - Elforyn - Folding Knife
The RL1 is a knife made by Fallkniven in honor of the famous Robert W Loveless, a giant of the American knife guild, who passed away in 2010.
Intended use: collectible/sporty
Blade: 59HRC Elmax stainless steel
Handle: 420J2 stainless steel and Elforyn inserts
Blade length: 67mm.
Blade thickness: 3mm.
Length closed: 96mm.
Total length: 165mm.
Weight: 72g.
Closure: Liner Lock
Clip: not present
Scabbard: Nylon
Notes: -F-RL1EY -
Fallkniven - RL1di knife - Desert Ironwood - knife
The RL1 is a knife made by Fallkniven in honor of the famous Robert W Loveless, giant of the American cutlers guild, who died in 2010.
Intended use: collection / sports
Blade: Elmax 59HRC stainless steel
Handle: 420J2 stainless steel and Ironwood inserts
Blade length: 67mm.
Blade thickness: 3mm.
Closed length: 96mm.
Total length: 165mm.
Balancing: -
Weight: 72g.
Closure: Liner Lock
Clip: -
Sheath: nylon
Note:F-RL1DI -
Fallkniven - Taiga Forester - TF1 - SanMai CoS Steel - Desert Ironwood - knife
Intended Use: Hiking / Hunting / Collection
Production type: industrial
Country of production: Japan
Blade: Japanese rolled stainless steel CoS at 60HRC
Blade Treatment: Satin finish
Handle: Desert Ironwood
Blade Length: 120mm.
Blade thickness: 5mm.
Total length: 235mm.
Balance: backward
Weight: 230g.
Sheath: zytel
Notes: -F-TF1Z -
Fallkniven - Taiga Forester - TF2 - SanMai CoS Steel - thermorun - knife
Intended use: Hiking / Hunting
Type of production: industrial
Country of production: Japan
Blade: Japanese rolled stainless steel CoS at 60HRC
Blade treatment: Satin finish
Handle: Thermorun
Blade length: 120mm.
Blade thickness: 5mm.
Total length: 235mm.
Balance: backward
Weight: 185g.
Scabbard: zytel
Notes: -F-TF2Z -
Fallkniven - Taiga Hunter knife - TH - SanMai CoS Steel - thermorun - knife
The taiga knives are distinctive hunting and all-round knives for the demanding user. A strong blade in laminated cobalt steel does not only mean a stable function, you notice quite quickly that the edge holds the sharpness really well without being brittle. The reason is the fine, well heat treated and tempered steel but also the convex shaped edge that is not only strong but also wood-sharp. The ergonomic shape of the handle provides a secure grip regardless of weather and wind.If you look at function and most value for money, the rubber-handle Taiga blades should be preferred. Regardless of the weather and wind, the rubber handle gives a really good grip and when it comes to the steel properties they are of course as good as the knives with wooden handles.Intended use: Hiking / Hunting / Collection
Type of production: industrial
Provenance Lama: Japan
Blade: Japanese CoS laminated stainless steel at 60HRC
Blade treatment: -
Handle: Thermorun
Blade length: 84mm.
Blade thickness: 4.5mm.
Total length: 188mm.
Balancing: backward to 2cm. from the guard branch
Weight: 116g.
Sheath: zytel
Note: -F-TH2Z -
Fallkniven - Taiga knife SK2L - SanMai CoS Steel - ironwood - knife
The taiga knives are distinctive hunting and all-round knives for the demanding user. A strong blade in laminated cobalt steel does not only mean a stable function, you notice quite quickly that the edge holds the sharpness really well without being brittle. The reason is the fine, well heat treated and tempered steel but also the convex shaped edge that is not only strong but also wood-sharp. The ergonomic shape of the handle provides a secure grip regardless of weather and wind.As shown in the design, TH1 is a handmade knife with a handle in the very exclusive desert ironwood (lat. Olneya tesota). This species is not listed in CITES Annexes or the IUCN Red List of Endangered Species and is therefore legal to use. Like all natural materials, it varies in texture and color, making each knife an individual creation. A beautifully veined pattern may look attractive but a straight, patterned handle is actually stronger. Desert ironwood, which grows in the southwestern United States, has a somewhat peculiar quality – it is heavier than water, its density is 1.2 kg/dm³ which means it will sink. If you want to maintain or even increase the luster in the wood, treat it with log oil, furniture oil, bench oil or other type of wood oil containing linseed oil. The fact that the blade goes full width through the handle (so-called full tang blade) results in a very strong and reliable construction and gives a comfortable weight to the knife.Intended use: Hiking / Hunting / Collection
Type of production: industrial
Provenance Lama: Japan
Blade: Japanese CoS laminated stainless steel at 60HRC
Blade treatment: -
Handle: ironwood
Blade length: 84mm.
Blade thickness: 4.5mm.
Total length: 188mm.
Balancing: backward to 2cm. from the guard branch
Weight: 149g.
Sheath: zytel
Note: -F-TH1Z -
Corey Sar Fox - Camp Knife - Natural Micarta - Made in Italy
Intended use: Hunting / Hiking / Agriculture
Type of production: Industrial
Country of production: Italy
Blade: D2 steel at 59HRC
Blade treatment: Stonewashed
Handle: Micarta
Blade length: 90mm.
Blade thickness: 3mm.
Total length: 165mm.
Balancing: Backward
Weight: 94 g.
Sheath: leather, ambidextrous, belt with horizontal port
Packaging: Cardboard box
Notes: Designed by Corey Sar Fox, Texan knifemaker who has lived in Italy for over 20 yearsCSF-CNA -
Corey Sar Fox - Camp Knife - Orange Micarta - Made in Italy
Intended use: Hunting / Hiking / Agriculture
Type of production: Industrial
Country of production: Italy
Blade: D2 steel at 59HRC
Blade treatment: Stonewashed
Handle: Micarta
Blade length: 90mm.
Blade thickness: 3mm.
Total length: 165mm.
Balancing: Backward
Weight: 94 g.
Sheath: leather, ambidextrous, belt with horizontal port
Packaging: Cardboard box
Notes: Designed by Corey Sar Fox, Texan knifemaker who has lived in Italy for over 20 yearsCSF-CAR -
Fallkniven - Embla knife SK2L - SanMai CoS Steel - ironwood - knife
Intended use: Hiking / Hunting / Collection
Type of production: industrial
Origin: Lama: Japan
Blade: in CoS 60HRC laminated stainless steel
Blade treatment: -
Handle: ironwood
Blade length: 9.5mm.
Blade thickness: 4.5mm.
Total length: 210mm.
Balancing: set back to 2cm. from the guard branch
Weight: 148g.
Sheath: black leather
Note: -F-SK2L -
Fallkniven - S1x Survival Knife - SanMai CoS Steel - knife
Intended use: Hiking / Hunting
Type of production: industrial
Origin: Lama: Japan
Blade: full tang, in CoS 60HRC laminated stainless steel
Blade treatment: -
Handle: Thermorun
Blade length: 132mm.
Blade thickness: 6mm.
Total length: 249mm.
Balancing: advanced to 1cm. from the guard branch
Weight: 290g.
Closing: -
Sheath: in zytel
Note: -
Send feedback
History
Saved
CommunityF-S1X -
Fallkniven - S1xb Survival Knife Black - SanMai CoS Steel - knife
Intended use: Hiking / Hunting
Type of production: industrial
Origin: Lama: Japan
Blade: full tang, in CoS 60HRC laminated stainless steel
Blade treatment: Tungsten Carbide
Handle: Thermorun
Blade length: 132mm.
Blade thickness: 6mm.
Total length: 249mm.
Balancing: advanced to 1cm. from the guard branch
Weight: 290g.
Closing: -
Sheath: in zytel
Note: -
Send feedback
History
Saved
CommunityF-S1XB -
Fallkniven - MB - Modern Bowie - Satin SanMai CoS - knife
Destination of use: Hiking / Hunting
Blade: hidden tang, in CoS 60mm stainless steel
Country of production: Japan
Handle: Thermorun, with stainless steel guard
Blade Length: 254mm.
Blade thickness: 7.41mm.
Overall length: 387mm.
Balance: advanced to 0.5cm. from the lower guard branch
Weight: 565g.
Sheath: black leather
Notes: Fallkniven cardboard box, ABS sealed cushion with fallkniven logos, Fallkniven DC4 sharpening stone with leather caseF-MB -
Coltelli - Number 78 - 2016 - magazine
Rivista a colori Bimestrale prodotta e distribuita in Italia specializzata in coltelli di tutti i tipi (collezione, artigianali, militari, sportivi, multiuso…). 82 Pagine
In questo numero:
CUSTOM
Adriano Donzelli, continui miglioramenti
Lame artigianali dall'IndonesiaEVENTI
Achi Show 2016 a Parma
Coltello in festa a Maniago
Damasco in FranciacortaTECNICA
Al lavoro con Milko di Paco
Come ricavare un picchettoIN VETRINA
Nilte Raggio
Lionsteel KUR
Bark River Trakker Companion
Ruger 2-Stage e Go-N-Heavy
Swiza
Extrema Ratio Shrapnel SanMai CoS
Fox Sputnik
Cold Steel Colossus
Affilatoio Zwillingcoltelli-78 -
Coltelli - Number 75 - 2016 - magazine
Rivista a colori Bimestrale prodotta e distribuita in Italia specializzata in coltelli di tutti i tipi (collezione, artigianali, militari, sportivi, multiuso…). 82 Pagine
In questo numero:
CUSTOM
Un Big Bear di Kressler
L'inciso di Loveless
EVENTI
Mostra del coltello custom a Valdobbiadene
Ecck Show 2016
Sguardo al futuro dall'IWA di Norimberga
IN CUCINA
Zwilling serie Four Star
Opinel Art Decò
OUTDOOR
I-Clip
Minox 10x43
IN VETRINA
Extrema Ratio Ti-Rock
Fallkniven S1 Pro
Buck Inertia
Lionsteel Beat e Acorn
Maserin 977 e 978
Fox Ron Lake
Sog SlimJim
Real Steel H6, E77, H5coltelli75 -
Coltelli - Number 72 - October/November 2015 - magazine
Rivista a colori Bimestrale prodotta e distribuita in Italia specializzata in coltelli di tutti i tipi (collezione, artigianali, militari, sportivi, multiuso…). 82 Pagine
In questo numero:
CUSTOM
I rasoi a mano libera di Luca Pizzi
Dario Quartini
Giuseppe Pala
EVENTI
Achi a Parma
Raduno a Vittorio Veneto
Coltello in festa a Maniago
K-Days 2015
TECNICA
Come realizzare il filework
Il damasco ritorto
Victorinox vs. copia cinese
TREND
Flipper mania
IN VETRINA
Helle Utvaer
Antonini Old Bear
Extrema Ratio T-Razor
Gerber Strongarm
Fox B.R.I.
Portachiavi Key-Barcoltelli72 -
Coltelli - Number 71 - August / September 2015 - magazine
Rivista a colori Bimestrale prodotta e distribuita in Italia specializzata in coltelli di tutti i tipi (collezione, artigianali, militari, sportivi, multiuso…). 82 Pagine
In questo numero:
COVER STORY
Bill Moran
PERSONAGGI
Renzo Dessì
EVENTI
Lame sotto i portici
FiCX Paris
Palmas Arborea
Blade Show
TECNICA
I metodi per affilare un coltello
COLLABORAZIONI
Maserin e Atti
Viper e Silverstrelli
IN VETRINA
Fantoni HB03
Benchmade 761Ti
Fox Terzuola
Real Avid Revelation Amp
Kiku Matsuda
Spyderco Dog Tag
Ka-Bar Snody
Zwilling 600S
RUBRICHE
I vostri coltelli
Notizie in brevecoltelli71 -
Fallkniven - Erna SK18 - BBQ Chef 18cm - professional kitchen knife
Recommended use: Barbecue, Vegetable, Raw Meat, Fish
Steel: Stainless Laminate CoS 60 HRC
Production Lama Japan
Overall length: 292mm.
Blade length: 180mm.
Blade thickness: 2.5mm.
Type of sharpening: flat
Type of construction: laminated with riveted handle
Handle: birch burl
Maintenance: not dishwasher safe
Packaging: bag with zip in leather and leather sheath marked FallknivenF-SK18 -
Coltelli - Number 70 - June / July 2015 - magazine
Rivista a colori Bimestrale prodotta e distribuita in Italia specializzata in coltelli di tutti i tipi (collezione, artigianali, militari, sportivi, multiuso…). 82 Pagine
In questo numero:
Extrema Ratio Psycho e Kato
Bark River Teddy II, Bravo Survivor e Camp & Trail
Fox Zero, Retribution Scout, Battle Chef e Njall
Spyderco Domino
Lionsteel T.R.E.
Victorinox Compact
Zwilling Procoltelli70 -
Fallkniven - FS3 FlipStone - Affiatore Ceramic and Diamond Pocket
Stone pocket , for sharpening , with a side ceramic 1 micron ( grain 15000 ) and with one side to the diamond 25 micron ( 600 grit ) . It has the shape of a folding knife , with quick-release mechanism with safety lock to prevent accidental opening . The closure is done by pressing and releasing the button opening .
Never before has it been so nice sharpen your knife! Not only does the new FlipStone is fun to hold and handle, but these stones for sharpening ceramic and diamond are able to create an incredible on any kind of knife sharpening .
The side of the diamond has a treatment TAN ( Alumina Titanium Nitride ) while the ceramic side is made from synthetic sapphires . Both materials are extremely durable and long lasting and come in 8 and 10 hardness on the Mohs scale ; both are able to remain perfect and long lasting , so as to ensure the best possible result , also of special steels or sintered with extremely high hardness .
The stones are joined together using special adhesives 3M and can not be separated in any way . They can be used dry or with a little water and soap or acuqa to keep the surfaces clean. If at first glance there may appear to be excessively rough , do not worry gradually become smooth with use and will improve more and more as the years to come.
Stone Size : 25x65 mm .
Open length : 165 mm.
Closed length : 98 mm .
Handle: Zytel
Accompanied by spacers, spring replacement and a handy wrench to unscrew the handles . Weights and dimensions, ideal to take with you on a trip if for quick but effective sharpening .
Quality level : HighF-FS3 -
Coltelli - Numero 62 - Febbraio/Marzo 2014 - rivista
Rivista a colori Bimestrale prodotta e distribuita in Italia specializzata in coltelli di tutti i tipi (collezione, artigianali, militari, sportivi, multiuso…). 82 Pagine
Il fascicolo di febbraio-marzo 2014 è dedicato al Cic show, l’esposizione tenutasi a Milano lo scorso dicembre nella quale oltre ottanta knifemakers hanno esibito i loro pezzi, affascinando e attirando i desideri del migliaio di visitatori della mostra.Nella cover story rivolgiamo la nostra attenzione a Fabrizio Silvestrelli (in arte Silvester), il coltellinaio bresciano che da ormai 20 anni si è specializzato nella realizzazione di coltelli artigianali che colpiscono per la bellezza delle forme, la precisione delle lavorazioni e l’accostamento dei materiali.
Nel mondo custom troviamo anche l’eclettica produzione di Mauro Bonassi, da poco maestro della Corporazione italiana coltellinai, e quella del giovane sardo Davide Steri che è riuscito, attraverso le sue creazioni, a unire sperimentazione e tradizione.
In questo numero potete trovare il reportage sul simposio delle tecniche di forgiatura tenutosi nella suggestiva cornice del maglio di Pagnano d’Asolo, organizzato dal laboratorio La Britola di Valdobbiadene.
Inoltre Coltelli recencisce le lame (in particolare i modelli TSP, TS-1, FM-1, NAV-H e NAV-T) della Medford, coltelli militari prodotti in piccola tiratura negli Usa e i modelli Sierra Foxtrott II e III della Boker, due nuove lame fisse d’impostazione militare che appartengono alla linea Magnum e che offrono un rapporto qualità prezzo davvero inaspettato. Una novità di importazione Tecnocut sono le penne tattiche: oltre a essere accattivanti e ben realizzate, possono contare su un prezzo davvero interessante. Infine una vera chicca. Beretta non significa solo armi da fuoco: la storica Casa gardonese ha a listino un’ampia varietà di coltelli, dall’utility alle lame di pregio da abbinare a un fucile di prestigio disegnate da knifemaker di fama come Silvester (sì, proprio lui, il protagonista della nostra cover story).
coltelli62 -
Fallkniven - DC521 - Whetstone to Diamond and Ceramic
Sharpening stone benches, with side diamond medium-grained and fine-grained ceramic side.
Dimensions of 55mm in width, 210mm in length and 6mm in thickness
Great for sharpening knives and kitchen knives sports a high level: the diamond allows a quick sharpening, suitable for everyday use on sports knives and hiking, while the ceramic allows you to work slowly ensuring a finish more accurate, especially on kitchen knives.
F-DC521 -
Coltelli - Numero 58 - Giugno/Luglio 2013 - rivista
Rivista a colori Bimestrale prodotta e distribuita in Italia specializzata in coltelli di tutti i tipi (collezione, artigianali, militari, sportivi, multiuso…). 96 Pagine
È un numero internazionale quello di Coltelli che avete tra le mani. Siamo, infatti, andati a cercare all’estero le tendenze e le soluzioni adottate per superare la grande crisi economica. A partire dalla storia di copertina, che ha per protagonista un bel coltello del danese Jesper Voxnaes, da molti conosciuto come "Vox", incontrato a marzo all’Iwa di Norimberga, la più grande fiera europea dedicata al mondo delle armi. Vox vive a Løgstrup, vicino ai fiordi, nella zona Nord dello Jutland, e costruisce coltelli esteticamente accattivanti ma al contempo utili e funzionali. Lasciamo il filone “belli ma utili” per entrare in quello delle lame da sogno: Coltelli vi accompagna in una delle mostre più ambite a livello mondiale, il Boston Art Knife Classic al quale vengono invitati 20 dei migliori coltellinai a livello mondiale che possono portate al massimo otto lame da mostrare ai 150 collezionisti presenti alla mostra. Più “terrestre” è la mostra di Livorno (rispetto a quella “spaziale” di Boston, naturalmente), organizzata con grande merito, in un periodo così difficile per la coltelleria custom italiana, da Lc Coltelleria e dall’Associazione coltellinai livornese: un segno forte della volontà di continuare a credere nella qualità dei nostri prodotti, tanto apprezzati Oltreoceano. Nel settore della coltelleria sportiva, abbiamo cercato di mostrarvi esempi di bellezza e utilità nel mondo delle lame. Dall’Extrema Ratio Task, nato per compiti gravosi, e dalle pinze multiuso di Leatherman e Victorinox fino ai Böxer Exskelibur 1 e 2 allo Spyderco Pingo, dietro ai quali stanno due knifemaker famosi come il sudafricano Mike Skellern e… il nostro amico Vox.coltelli58 -
Coltelli - Numero 57 - Aprile/Maggio 2013 - rivista
Rivista a colori Bimestrale prodotta e distribuita in Italia specializzata in coltelli di tutti i tipi (collezione, artigianali, militari, sportivi, multiuso…). 96 Pagine
È in edicola il nuovo numero di Coltelli, ricco di numerose novità dal mondo delle lame artigianali e industriali. Tra i knifemaker del numero di aprile/maggio 2013 della rivista, vi presentiamo Antonio Farina, maestro della Corporazione italiana coltellinai, titolo di cui si fregia anche Pietro Elias, l’altro protagonista del mondo custom che abbiamo intervistato. Per quanto riguarda gli eventi, vi parleremo dell’East Cost Custom Show, svoltosi a marzo a New York. Non mancano alcuni scatti ai coltelli esposti alla fiera di Ferrara; inoltre vi è stato a Scarperia il Concorso nazionale per il miglior coltello amatoriale. È un coltello molto speciale quello realizzato da Ted M. Dowell, commissionato dall’organizzatore della prestigiosa Art Knife Invitational, Phil Lobred. Dopo aver affrontato (nello scorso numero) il tema del damasco ritorto, ora tratteremo il damasco esploso: come si forgia e i suoi impieghi. E ancora… tante tante lame: l’Extrema Ratio Pugio, l’americana Ka-bar con i suoi machete (e altre chicche), un multifunzione di Antonini pensato per il personale di soccorso, civile e militare, i nuovi lama fissa di Fantoni (il C.U.T) e Viper (il Carnera). Zwilling ci mette a disposizione la linea completa dei nuovi coltelli da cucina, Beltrame propone una rivisitazione del classico stiletto e da Mora una simpatica e colorata integrazione tra accendifuoco e coltello. Vi presenteremo, infine, le indicazioni e le modalità per partecipare ad una nuova iniziativa di Coltelli: se avete in mente un coltello da tavola, disegnate il progetto e inviatelo alla redazione. Il vincitore potrà vedere materializzarsi in acciaio e legno il suo coltello ideale, e ricevere in premio il primo set da quattro pezzi realizzato. Buona fortuna e… buona lettura!coltelli57 -
Coltelli - Numero 56 - Febbraio/Marzo 2013 - rivista
Rivista a colori Bimestrale prodotta e distribuita in Italia specializzata in coltelli di tutti i tipi (collezione, artigianali, militari, sportivi, multiuso…). 96 Pagine
Non perdetevi il numero di febbraio-marzo 2013 di Coltelli, la principale rivista italiana dedicata al mondo delle lame, artigianali, sportive e da lavoro. In questo numero, un ampio reportage fotografico riporta tutti i pezzi più belli visti allo scorso Cic Show di Milano, la manifestazione organizzata ogni anno dalla Corporazione italiana coltellinai all'hotel Marriott di Milano. Di seguito trovare il sommario del numero in edicola. In copertina: Fallkniven Volcano (foto di Tommaso Rumici e Paolo Sturaro) Editoriale 5 Una sfaccettata passione In libreria 6 Il fumetto militare italiano Lettere 7 Arriva… la posta Cover Story 8 Novità dal fronte svedese Eventi 12 Cic Show 2012 Collezionismo 30 Un nécessaire imperiale Coltelli da caccia 34 Un coltello per tutti Coltelli militari 36 Tre modi di dire militare Novità 40 Largo ai giovani! Eventi 42 Lo stile di Maniago Lame militari 44 La sorella cattiva Test 46 My name is Rold, Vox Rold 60 Dopo l’internazionalità, la tradizione Tecnica 48 Non perdiamo il filo Come si fa 54 Il damasco ritorto Outdoor 62 Per ogni evenienza 63 Arrivano gli S.w.a.t. I Vostri coltelli 65 Lame e calligrafia News 66 Novità e segnalazionicoltelli56 -
Coltelli - Numero 36 - Ottobre/Novembre 2009 - rivista
Rivista a colori Bimestrale prodotta e distribuita in Italia specializzata in coltelli di tutti i tipi (collezione, artigianali, militari, sportivi, multiuso…). 98 Pagine
Ti manca un numero della tua rivista preferita? CLICCA QUI per vedere tutte le riviste disponibili nei nostri magazzini.C2009-36 -
Coltelli - Numero 42 - Ottobre/Novembre 2010 - rivista
Rivista a colori Bimestrale prodotta e distribuita in Italia specializzata in coltelli di tutti i tipi (collezione, artigianali, militari, sportivi, multiuso…). 98 Pagine
Ti manca un numero della tua rivista preferita? CLICCA QUI per vedere tutte le riviste disponibili nei nostri magazzini.C2010-42 -
Coltelli - Numero 44 - Febbraio/Marzo 2011 - rivista
Rivista a colori Bimestrale prodotta e distribuita in Italia specializzata in coltelli di tutti i tipi (collezione, artigianali, militari, sportivi, multiuso…). 98 Pagine
Ti manca un numero della tua rivista preferita? CLICCA QUI per vedere tutte le riviste disponibili nei nostri magazzini.C2011-44 -
Coltelli - Numero 48 - Ottobre/Novembre 2011 - rivista
Rivista a colori Bimestrale prodotta e distribuita in Italia specializzata in coltelli di tutti i tipi (collezione, artigianali, militari, sportivi, multiuso…). 98 Pagine
INDICE:
* Profili: Andrea Rosa
* Profili: Nuovi Maestri CIC Paolo Gidoni e Cesare Tonelli
* Eventi: IX Biennale Resolza e Leppas a Pattada
* Test: Daga Custom Richard C. Weber
* Profili: Il primo chiudibile di Bacchilega
* Storia: Il Falconiere di Kressler
* Test: Fisso di Jarno Movilli
* Tecnica: I materiali per l'impugnatura
* Test: Custom Lappone
* Eventi: Coltello in Festa a Maniago
* Test: Linder Jeans Custom SE
* Test: Coltello del forum della Coltelleria Collini by Fantoni
* Test: Viper chiudibili in ceramica
* Test: Olivetto Arkansas Bowie
* Test: Beltrame Swinguard
* Test: TOPS Tom Brown Tracker
* Test: TOPS Stryker Defender Tool
* Test: TOPS Mil-Spie 5
* Test: TOPS Mountain Lion
* Test: TOPS CQT 5.5
* Storia: Saladini "Lo Scarperia"
* Test: Mora Companion MG
* Test: Ausonia Machete
* Test: Maserin Accetta 952
* Test: MAC Tekno Titanio
* In Cucina: Antonini Onda
* In Cucina: Premax Spelucchini "Il Verdura"C2011-48 -
Coltelli - Numero 49 - Dicembre 2011/Gennaio 2012 - rivista
Rivista a colori Bimestrale prodotta e distribuita in Italia specializzata in coltelli di tutti i tipi (collezione, artigianali, militari, sportivi, multiuso…). 96 Pagine
IN QUESTO NUMERO:
* Personaggi: Daniele Ibba, Maurizio Mattioli, Moreno Franzin
* Tecnica: i segreti dell'acciaio
* Eventi: Culter Expo 2011
* Spade Giapponesi: L'antica tecnica di forgiatura giapponese proposta da Yoshindo Yoshihara
* Test: I nuovi fissi Aitor
* Test: Tank, il carroarmato di Viper
* Manutenzione: Liscio come l'olio, con Victorinox
... e molto altro...C2012-49 -
Coltelli - Numero 50 - Febbraio/Marzo 2012 - rivista
Rivista a colori Bimestrale prodotta e distribuita in Italia specializzata in coltelli di tutti i tipi (collezione, artigianali, militari, sportivi, multiuso…). 96 Pagine
IN QUESTO NUMERO:
* Personaggi: Santino Ballestra, Simone Raimondi
* Custom: Due coltelli per Elias e Piras
* Eventi: CIC Show 2011
* Test: Hogue, la situazione in pugno
* Multimedia: Il sapere in tasca, la tabella acciai su Android
... e molto altro...C2012-50 -
Coltelli - Numero 51 - Aprile/Maggio 2012 - rivista
Rivista a colori Bimestrale prodotta e distribuita in Italia specializzata in coltelli di tutti i tipi (collezione, artigianali, militari, sportivi, multiuso…). 96 Pagine
IN QUESTO NUMERO:
* Personaggi: Santino Ballestra, Max Salice Sanna
* Custom: N. 185 di Sergio Consoli
* Tecnica: C'è Coltello e Coltello; i diversi tipi di lama
* Custom: Mod. 430 di Stefano Trentini
* Eventi: 24esima edizione Esposizione del coltello artigianle custom di Scarperia
* Tecnica: La cura della Nihon-To (lame giapponesi)
* In vetrina: Cold Steel - Rajah
* In vetrina: Microtech: Socom Elite e SF M/A (Select Fire Manual Action)
* Fight Club: i coltelli da combattimento
* In vetrina: Maserin Combat Ready
* In vetrina: Fantoni Hide Limited Edition
... e molto altro...C2012-51 -
Fallkniven - A1 BLK - knife
Intended Use: Tactical / Military
Blade: full tang stainless steel San-Mai VG-10/420J2 59HRC coated black Ceracoat 8H
Handle: Kraton
Blade length: 160mm.
Blade thickness: 6mm.
Length closed:-mm.
Total length: 280mm.
Balance: advanced to 0.5cm. the branch of lower guard
Weight: 305g.
Closing: -
Clip: -
Sheath: Zytel tactical
Notes:F-A1BLZ -
Fallkniven - A1 Zytel knife - coltello
Destinazione d'uso: sportivo/caccia/militare
Lama: full tang in acciaio inox San-Mai VG-10/420J2 59HRC
Manicatura: Kraton
Lunghezza lama: 160mm.
Spessore della lama: 6mm.
Lunghezza chiuso: -mm.
Lunghezza totale: 280mm.
Bilanciatura: avanzata a 0.5cm. dal ramo di guardia inferiore
Peso: 305g.
Chiusura: -
Clip: -
Fodero: in zytel
Note:F-A1Z -
Fallkniven - A2 - knife
Survival knife - News from the Swedish company larger than the A1 model.
Thanks to its extreme solidity, strength and hardness, it lends itself easily to the most extreme and hard.
- Steel blade VG10 from 200 mm to a thickness of 6 mm
- Total length 330 mm
- Weight 380 grams
- Black leather sheathF-A2 -
Fallkniven - DC3 - Affiatore Ceramica e Diamante - coltello
Pietra a secco per affilatura con un lato in ceramica grana 6000 e con un lato al diamante da 25 micron (grana 600) a grana fine. Dimensioni di 25x75 mm.
E' accompagnata da un comodo e robusto astuccio in cuoio nero ed è l'ideale per peso e dimensione da portare sempre con se in escursione per rapide ma efficaci affilature da campo.
Livello qualitativo: ottimoF-DC3 -
Fallkniven - DC4 - Sharpener Ceramic and Diamond - Stone
Dry stone for sharpening ceramic grain with one hand and with one side to the 6000 diamond 25 micron (600 grit) to fine-grained. Size of 32x100 mm.
And 'accompanied by a convenient and robust black leather case and is the ideal size and weight to carry always with you on a hike to quick but effective sharpening field.
Quality: very good
F-DC4 -
Fallkniven - F1 BLK - knife
Intended Use: Tactical / Military / Hunting
Blade: full tang stainless steel 59HRC San-Mai VG-10/420J2 with black Teflon coating
Handle: It Thermorun
Blade length: 105mm.
Blade Thickness: 4.5mm.
Closed Length: - mm.
Total length: 215mm.
Balance: back to 2.5 cm from the lower branch of the guard
Weight: 150g.
Closing: -
Clip: -
Sheath: Kydex
Notes: knife official Swedish Air Force pilots since 1995F-F1BL -
Fallkniven - NL1 - Thor - knife
Intended Use: hunting / sporting
Blade: full tang stainless steel 59HRC San-Mai VG-10/420J2
Handle: rings Ox-Hide (cowhide) E
Blade length: 254mm.
Blade Thickness: 7mm.
Length closed:-mm.
Total length: 385mm.
Balance: advanced to 3.5 cm. the branch of lower guard
Weight: 520g.
Closing: -
Clip: -
Sheath: leather high quality
Notes: 420J2 stainless guard and aluminum endcapsF-NL1 -
Fallkniven - NL2 - Odin - knife
The Fallkniven Odin (first in importance among the Celtic gods) is the second model after Thor in order of size, the beautiful Northern Light series.
The knife is handmade using only top quality materials.Intended Use: collection / Survival
Type of production: Industrial
Production Blade: Japan
Blade: VG10 (HRC 59)
Treatment Lama: -
Handle material: Polymer
Blade length: 200mm.
Blade thickness: 6.5 mm.
Length closed: -
Total length: 325mm.
Thick when closed: -
Balance: -
Weight: 380g.
Closing: -
Clip: -
Sheath: leather, exquisite workmanship and robustness.
Packaging: cardboard box
Notes:F-NL2 -
Fallkniven - NL3 - Njord - knife
Intended Use: hunting / sporting
Blade: full tang stainless steel 59HRC San-Mai VG-10/420J2
Handle: rings Ox-Hide (cowhide) E
Blade length: 150mm.
Blade Thickness: 5mm.
Length closed:-mm.
Total length: 268mm.
Balance: advanced to 0.5 cm. the branch of lower guard
Weight: 280g.
Closing: -
Clip: -
Sheath: leather high quality
Notes: 420J2 stainless guard and aluminum endcapsF-NL3 -
Fallkniven - NL4 - Frey - knife
Intended Use: hunting / sporting
Blade: full tang stainless steel 59HRC San-Mai VG-10/420J2
Handle: rings Ox-Hide (cowhide) E
Blade length: 130mm.
Blade Thickness: 5mm.
Length closed:-mm.
Total length: 244mm.
Balance: backward to 1 cm. the branch of lower guard
Weight: 190g.
Closing: -
Clip: -
Sheath: leather high quality
Notes: 420J2 stainless guard and aluminum endcapsF-NL4 -
Fallkniven - NL5 - Idun - knife
Fallkniven Sweden - Idun (Celtic god of fertility and youth) is a very compact with excellent finishes, perfect for use of hunting - The knife is handmade using only top quality materials
Intended Use: collection / Survival
Type of production: Industrial
Production Blade: Japan
Blade: full tang stainless steel 59HRC San-Mai VG-10/420J2
Handle: rings Ox-Hide (cowhide) E
Blade length: 100mm.
Blade thickness: 5mm.
Length closed: -
Overall Length: 220mm.
Thick when closed: -
Balance: -
Weight: 170g.
Closing: -
Clip: -
Sheath: leather, exquisite workmanship and robustness.
Packaging: cardboard box
Notes:F-NL5