Knives, collection knife, tactical knives, outdoor knives, pocket knives and tools
-
Lurisinga - Gallurese Razor Blade - Traditional Gallura Knife - Handcrafted Knife
The "Lurisinca," a traditional knife from Luras in Gallura, owes its name to the Lurese term for a local woman, reflecting the feminine nature of the "razor blade" used. The Gallurese Razor Blade, a typical Sardinian knife resembling a point-less shaving razor, was essential in cork processing, especially for making "quadretti," precursors to cork stoppers. However, this practice has declined due to the economic crisis, forcing many craftsmen to close their shops. The Gallurese Razor Blade, versatile and always at hand, represented an indispensable tool for every daily need.
Type of Production: Handcrafted
Blade Production: Italy
Blade: Stainless steel
Handle: Bovine horn tip
Blade Length: 80mm.
Blade Thickness: 2mm.
Closed Length: 90mm.
Total Length: 185mm.
Weight: 65g.
Lock: No blade lock
Packaging: Cardboard boxLU-GAL€77.87Only 1 left -
Leatherman - 4.5" Nylon Sheath with Pockets for Signal and Surge - 934933 - Replacement Accessories
Protect your multifunction tool with these revised nylon sheaths.
Every detail is designed to ensure the cases last a long time, are reliable and easy to use. High-quality metal rivet snap allows for a secure closure that keeps the tool safe.
It is made of durable stretch ballistic nylon with reinforced seams for better accessibility and fit. Extra pockets in this nylon sheath are made to carry a bit kit, a bit extender, and a small flashlight or marker. It fits belts up to 4.5 cm wide. The overall fit may vary depending on the accessories carried.
COMPATIBILITY.
* Free P2
* Free P4
* Signal
* Super Tool
* Surge
INTERNAL DIMENSIONS
12 x 3.8 x 2 cmLE934933 -
Le Petit Jouteur - Oyster Opener Knife Set and Leather Hand Guard
Handcrafted box containing a "Le petit jouteur" oyster knife and a leather hand guard.
Leaning the handle of your "Le Petit Jouteur" oyster knife against your ear, you may not hear the lapping of the waves ...
Oyster knife with mussel shell handle
Handcrafted made in France."Le Petit Jouteur" professional oyster knife has a 2.5 mm thick stainless steel blade.
High quality, very hard and ultra-strong thanks to a heat treatment process by cryogenization.
An ambidextrous, ergonomically shaped knife with a stainless steel blade that allows you to open shellfish quickly and safely.
A minimum of care and maintenance , will allow you to keep it in a state that will delight you for many years.
Included in the package is an ambidextrous hand guard made of handcrafted leather.
Weight 120 g
Dimensions 12 × 3.5 × 1.5 cm.
8169CON€65.57Only 1 left -
Leatherman - Thread Cutter Replacement Kit - 930350 - Accessories
Wire cutter replacement kit includes a set of replacement wire cutter inserts, two screws and a #8 Torx screwdriver for installation. Wire cutter inserts are made of premium stainless steel.
COMPATIBLE WITH:
* MUT®
* OHT
* Charge®+
* Charge®+ Forest Camo
* Charge®+ TTi
* Rebar
* Heritage Rebar
* Super Tool® 300+
* Heritage Super Tool 300
* Surge
* Surge® black and silver
* Wave®+
* Wave® black and silver
* Heritage Wave+
* Heritage Charge+
* FREE™ P2
* FREE™ P4
* Signal
* Signal® Topo
* Charge®+ G10
* 2H WaveLE930350 -
Indiana - Miniature knife - Bowie Sitting Bull Black - Blade 5.5 cm - collection knife
Intended use: Collection / Keychain
Type of production: semi-artisanal
Blade: 420 stainless steel
Production Lama: Italy
Handle: brass with unscrewable rear cap
Blade length: 60mm.
Blade thickness: 2mm.
Total length: 94mm.
Balancing: -
Weight: 14g.
Sheath: vinyl sheath
Notes: engraved bladeIN-MIN-B-TSB€23.77Only 1 left -
Indiana - Miniature knife - Bowie Bison - Blade 5.5 cm - collection knife
Intended use: Collection / Keychain
Type of production: semi-artisanal
Blade: 420 stainless steel
Production Lama: Italy
Handle: brass with unscrewable rear cap
Blade length: 60mm.
Blade thickness: 2mm.
Total length: 94mm.
Balancing: -
Weight: 14g.
Sheath: vinyl sheath
Notes: engraved bladeIN-MIN-B-BI€23.77Only 2 left -
Indiana - Miniature knife - Bowie Survival - Blade 5.5 cm - collection knife
Intended use: Collection / Keychain
Type of production: semi-artisanal
Blade: 420 stainless steel
Production Lama: Italy
Handle: brass with unscrewable rear cap
Blade length: 60mm.
Blade thickness: 2mm.
Total length: 94mm.
Balancing: -
Weight: 14g.
Sheath: vinyl sheath
Notes: engraved bladeIN-MIN-B-S€23.77Only 2 left -
Indiana - Miniature knife - Sitting Bull Bowie - Blade 5.5 cm - collection knife
Intended use: Collection / Keychain
Type of production: semi-artisanal
Blade: 420 stainless steel
Production Lama: Italy
Handle: brass with unscrewable rear cap
Blade length: 60mm.
Blade thickness: 2mm.
Total length: 94mm.
Balancing: -
Weight: 14g.
Sheath: vinyl sheath
Notes: engraved bladeIN-MIN-B-TS€23.77Only 4 left -
No brand - Pocket tactical knife vintage - knives
tactical knife made in Taiwan around the early 90's - One-handed ambidextrous opening and back lock blade. Complete with cordura sheath
Type of production: Industrial
Production Lama: Taiwan
Blade: 440 steel
Blade treatment: satin blade
Handle: kraton
Blade length: 75mm.
Blade thickness: 4mm.
Total length: 195mm.
Weight: 142g.
Sheath: in cordura
Note: -NB-1260€57.38Only 2 left -
No brand - Scout knife vintage - knives
Type of production: Industrial
Production Lama: Italy
Blade: 440A steel
Blade treatment: polished blade
Handle: plastic material
Blade length: 120mm.
Blade thickness: 2.5mm.
Total length: 240mm.
Weight: 84g.
Sheath: in leather
Note: -NB-SCOUT€15.57Only 4 left -
Leatherman - MOLLE Black XL sheath - LE930371 - Accessories
Compatible with the following Leatherman pliers:
* MUT®
* MUT® EOD
* Super Tool® 300
* Super Tool® 300 EOD
* Original Surge®
* Surge®
* Heritage Super Tool® 300
Heavy and robust nylon lining with Velcro closure and belt loop for both horizontal and vertical ports. Equipped with standard connections of the M.O.L.L.E. typeLE930366 -
Leatherman - Skeletool KB - folding knife
Intended use: Sports
Type of production: Industrial
Country of production: USA
Blade: 420HC stainless steel
Blade treatment: Satind
Handle: 6061-T6 aluminum
Blade length: 66mm.
Blade thickness: 2.6mm.
Length closed: 87mm.
Overall length: 151mm.
Thick when closed: 11mm.
Balancing: -
Weight: 38g.
Opening: hole on the blade
Washers: in brass
Closure: Liner Lock
Clip: stainless steel, removable, with the function of a bottle opener
Sheath: -
Packaging: Cardboard box with Leatherman logos
Note: -LE832385 -
Le Petit Jouter - Oyster Opener Knife - Walnut
Walnut oyster knife
Presitigious Oyster Opener with wooden handle.
Made in France craftsmanship.
The "Le Petit Jouteur" professional oyster knife has a 2.5 mm thick stainless steel blade.
High quality, very hard and ultra-strong, thanks to a heat treatment process by cryogenization.
An ambidextrous oyster spear blade.
Wood handle from French forests .
They use wood of French origin to decorate the handles, which are machined and assembled in France.
A minimum of care and maintenance ,
will enable you to keep your oyster knife in a condition that will amaze you for many years.
8169ostriche€34.42Only 1 left -
Coltelli - Number 78 - 2016 - magazine
Rivista a colori Bimestrale prodotta e distribuita in Italia specializzata in coltelli di tutti i tipi (collezione, artigianali, militari, sportivi, multiuso…). 82 Pagine
In questo numero:
CUSTOM
Adriano Donzelli, continui miglioramenti
Lame artigianali dall'IndonesiaEVENTI
Achi Show 2016 a Parma
Coltello in festa a Maniago
Damasco in FranciacortaTECNICA
Al lavoro con Milko di Paco
Come ricavare un picchettoIN VETRINA
Nilte Raggio
Lionsteel KUR
Bark River Trakker Companion
Ruger 2-Stage e Go-N-Heavy
Swiza
Extrema Ratio Shrapnel SanMai CoS
Fox Sputnik
Cold Steel Colossus
Affilatoio Zwillingcoltelli-78 -
Roncola gardening made in Italy - steel blade
Robust hatchet work, perfect for gardening or work in the country.
Production Lama: Italy
Blade: stainless steel curve
Handle: Wood
Blade length: 75mm.
Blade Thickness: 3.5 mm.
Closed Length: 115mm.
Thick when closed: 26mm.
Overall length: 195mm.
Weight: 145g.
Closing: bladeless blockron-1€28.69Only 2 left -
Coltelli - Number 75 - 2016 - magazine
Rivista a colori Bimestrale prodotta e distribuita in Italia specializzata in coltelli di tutti i tipi (collezione, artigianali, militari, sportivi, multiuso…). 82 Pagine
In questo numero:
CUSTOM
Un Big Bear di Kressler
L'inciso di Loveless
EVENTI
Mostra del coltello custom a Valdobbiadene
Ecck Show 2016
Sguardo al futuro dall'IWA di Norimberga
IN CUCINA
Zwilling serie Four Star
Opinel Art Decò
OUTDOOR
I-Clip
Minox 10x43
IN VETRINA
Extrema Ratio Ti-Rock
Fallkniven S1 Pro
Buck Inertia
Lionsteel Beat e Acorn
Maserin 977 e 978
Fox Ron Lake
Sog SlimJim
Real Steel H6, E77, H5coltelli75 -
Coltelli - Number 72 - October/November 2015 - magazine
Rivista a colori Bimestrale prodotta e distribuita in Italia specializzata in coltelli di tutti i tipi (collezione, artigianali, militari, sportivi, multiuso…). 82 Pagine
In questo numero:
CUSTOM
I rasoi a mano libera di Luca Pizzi
Dario Quartini
Giuseppe Pala
EVENTI
Achi a Parma
Raduno a Vittorio Veneto
Coltello in festa a Maniago
K-Days 2015
TECNICA
Come realizzare il filework
Il damasco ritorto
Victorinox vs. copia cinese
TREND
Flipper mania
IN VETRINA
Helle Utvaer
Antonini Old Bear
Extrema Ratio T-Razor
Gerber Strongarm
Fox B.R.I.
Portachiavi Key-Barcoltelli72 -
Coltelli - Number 71 - August / September 2015 - magazine
Rivista a colori Bimestrale prodotta e distribuita in Italia specializzata in coltelli di tutti i tipi (collezione, artigianali, militari, sportivi, multiuso…). 82 Pagine
In questo numero:
COVER STORY
Bill Moran
PERSONAGGI
Renzo Dessì
EVENTI
Lame sotto i portici
FiCX Paris
Palmas Arborea
Blade Show
TECNICA
I metodi per affilare un coltello
COLLABORAZIONI
Maserin e Atti
Viper e Silverstrelli
IN VETRINA
Fantoni HB03
Benchmade 761Ti
Fox Terzuola
Real Avid Revelation Amp
Kiku Matsuda
Spyderco Dog Tag
Ka-Bar Snody
Zwilling 600S
RUBRICHE
I vostri coltelli
Notizie in brevecoltelli71 -
Coltelli - Number 70 - June / July 2015 - magazine
Rivista a colori Bimestrale prodotta e distribuita in Italia specializzata in coltelli di tutti i tipi (collezione, artigianali, militari, sportivi, multiuso…). 82 Pagine
In questo numero:
Extrema Ratio Psycho e Kato
Bark River Teddy II, Bravo Survivor e Camp & Trail
Fox Zero, Retribution Scout, Battle Chef e Njall
Spyderco Domino
Lionsteel T.R.E.
Victorinox Compact
Zwilling Procoltelli70 -
Boss - Folder knife by David Winch - coltello sportivo
KNIFE RETIRED FROM PRIVATE COLLECTION
* Type: Previously purchased
* Condition: Overall in very good condition
* Commercially available: No
* Sharpening: YES
* Marks on blade: No
* Marks on handle: No
* Box: wooden
* Sheath: -
* Manuals, Certificates and Warranties: -
* Checked and Certified by our internal laboratoryType of production: Industrial
Blade: 440A steel
Blade Treatment: -
Handle: G10 Black
Blade length: 80mm.
Blade thickness: 3mm.
Total length: 195mm.
Weight: 80g.
Note: -BO-DW€61.48Only 2 left -
Coltelli - Numero 62 - Febbraio/Marzo 2014 - rivista
Rivista a colori Bimestrale prodotta e distribuita in Italia specializzata in coltelli di tutti i tipi (collezione, artigianali, militari, sportivi, multiuso…). 82 Pagine
Il fascicolo di febbraio-marzo 2014 è dedicato al Cic show, l’esposizione tenutasi a Milano lo scorso dicembre nella quale oltre ottanta knifemakers hanno esibito i loro pezzi, affascinando e attirando i desideri del migliaio di visitatori della mostra.Nella cover story rivolgiamo la nostra attenzione a Fabrizio Silvestrelli (in arte Silvester), il coltellinaio bresciano che da ormai 20 anni si è specializzato nella realizzazione di coltelli artigianali che colpiscono per la bellezza delle forme, la precisione delle lavorazioni e l’accostamento dei materiali.
Nel mondo custom troviamo anche l’eclettica produzione di Mauro Bonassi, da poco maestro della Corporazione italiana coltellinai, e quella del giovane sardo Davide Steri che è riuscito, attraverso le sue creazioni, a unire sperimentazione e tradizione.
In questo numero potete trovare il reportage sul simposio delle tecniche di forgiatura tenutosi nella suggestiva cornice del maglio di Pagnano d’Asolo, organizzato dal laboratorio La Britola di Valdobbiadene.
Inoltre Coltelli recencisce le lame (in particolare i modelli TSP, TS-1, FM-1, NAV-H e NAV-T) della Medford, coltelli militari prodotti in piccola tiratura negli Usa e i modelli Sierra Foxtrott II e III della Boker, due nuove lame fisse d’impostazione militare che appartengono alla linea Magnum e che offrono un rapporto qualità prezzo davvero inaspettato. Una novità di importazione Tecnocut sono le penne tattiche: oltre a essere accattivanti e ben realizzate, possono contare su un prezzo davvero interessante. Infine una vera chicca. Beretta non significa solo armi da fuoco: la storica Casa gardonese ha a listino un’ampia varietà di coltelli, dall’utility alle lame di pregio da abbinare a un fucile di prestigio disegnate da knifemaker di fama come Silvester (sì, proprio lui, il protagonista della nostra cover story).
coltelli62 -
Coltelli - Numero 58 - Giugno/Luglio 2013 - rivista
Rivista a colori Bimestrale prodotta e distribuita in Italia specializzata in coltelli di tutti i tipi (collezione, artigianali, militari, sportivi, multiuso…). 96 Pagine
È un numero internazionale quello di Coltelli che avete tra le mani. Siamo, infatti, andati a cercare all’estero le tendenze e le soluzioni adottate per superare la grande crisi economica. A partire dalla storia di copertina, che ha per protagonista un bel coltello del danese Jesper Voxnaes, da molti conosciuto come "Vox", incontrato a marzo all’Iwa di Norimberga, la più grande fiera europea dedicata al mondo delle armi. Vox vive a Løgstrup, vicino ai fiordi, nella zona Nord dello Jutland, e costruisce coltelli esteticamente accattivanti ma al contempo utili e funzionali. Lasciamo il filone “belli ma utili” per entrare in quello delle lame da sogno: Coltelli vi accompagna in una delle mostre più ambite a livello mondiale, il Boston Art Knife Classic al quale vengono invitati 20 dei migliori coltellinai a livello mondiale che possono portate al massimo otto lame da mostrare ai 150 collezionisti presenti alla mostra. Più “terrestre” è la mostra di Livorno (rispetto a quella “spaziale” di Boston, naturalmente), organizzata con grande merito, in un periodo così difficile per la coltelleria custom italiana, da Lc Coltelleria e dall’Associazione coltellinai livornese: un segno forte della volontà di continuare a credere nella qualità dei nostri prodotti, tanto apprezzati Oltreoceano. Nel settore della coltelleria sportiva, abbiamo cercato di mostrarvi esempi di bellezza e utilità nel mondo delle lame. Dall’Extrema Ratio Task, nato per compiti gravosi, e dalle pinze multiuso di Leatherman e Victorinox fino ai Böxer Exskelibur 1 e 2 allo Spyderco Pingo, dietro ai quali stanno due knifemaker famosi come il sudafricano Mike Skellern e… il nostro amico Vox.coltelli58 -
Coltelli - Numero 57 - Aprile/Maggio 2013 - rivista
Rivista a colori Bimestrale prodotta e distribuita in Italia specializzata in coltelli di tutti i tipi (collezione, artigianali, militari, sportivi, multiuso…). 96 Pagine
È in edicola il nuovo numero di Coltelli, ricco di numerose novità dal mondo delle lame artigianali e industriali. Tra i knifemaker del numero di aprile/maggio 2013 della rivista, vi presentiamo Antonio Farina, maestro della Corporazione italiana coltellinai, titolo di cui si fregia anche Pietro Elias, l’altro protagonista del mondo custom che abbiamo intervistato. Per quanto riguarda gli eventi, vi parleremo dell’East Cost Custom Show, svoltosi a marzo a New York. Non mancano alcuni scatti ai coltelli esposti alla fiera di Ferrara; inoltre vi è stato a Scarperia il Concorso nazionale per il miglior coltello amatoriale. È un coltello molto speciale quello realizzato da Ted M. Dowell, commissionato dall’organizzatore della prestigiosa Art Knife Invitational, Phil Lobred. Dopo aver affrontato (nello scorso numero) il tema del damasco ritorto, ora tratteremo il damasco esploso: come si forgia e i suoi impieghi. E ancora… tante tante lame: l’Extrema Ratio Pugio, l’americana Ka-bar con i suoi machete (e altre chicche), un multifunzione di Antonini pensato per il personale di soccorso, civile e militare, i nuovi lama fissa di Fantoni (il C.U.T) e Viper (il Carnera). Zwilling ci mette a disposizione la linea completa dei nuovi coltelli da cucina, Beltrame propone una rivisitazione del classico stiletto e da Mora una simpatica e colorata integrazione tra accendifuoco e coltello. Vi presenteremo, infine, le indicazioni e le modalità per partecipare ad una nuova iniziativa di Coltelli: se avete in mente un coltello da tavola, disegnate il progetto e inviatelo alla redazione. Il vincitore potrà vedere materializzarsi in acciaio e legno il suo coltello ideale, e ricevere in premio il primo set da quattro pezzi realizzato. Buona fortuna e… buona lettura!coltelli57 -
Coltelli - Numero 56 - Febbraio/Marzo 2013 - rivista
Rivista a colori Bimestrale prodotta e distribuita in Italia specializzata in coltelli di tutti i tipi (collezione, artigianali, militari, sportivi, multiuso…). 96 Pagine
Non perdetevi il numero di febbraio-marzo 2013 di Coltelli, la principale rivista italiana dedicata al mondo delle lame, artigianali, sportive e da lavoro. In questo numero, un ampio reportage fotografico riporta tutti i pezzi più belli visti allo scorso Cic Show di Milano, la manifestazione organizzata ogni anno dalla Corporazione italiana coltellinai all'hotel Marriott di Milano. Di seguito trovare il sommario del numero in edicola. In copertina: Fallkniven Volcano (foto di Tommaso Rumici e Paolo Sturaro) Editoriale 5 Una sfaccettata passione In libreria 6 Il fumetto militare italiano Lettere 7 Arriva… la posta Cover Story 8 Novità dal fronte svedese Eventi 12 Cic Show 2012 Collezionismo 30 Un nécessaire imperiale Coltelli da caccia 34 Un coltello per tutti Coltelli militari 36 Tre modi di dire militare Novità 40 Largo ai giovani! Eventi 42 Lo stile di Maniago Lame militari 44 La sorella cattiva Test 46 My name is Rold, Vox Rold 60 Dopo l’internazionalità, la tradizione Tecnica 48 Non perdiamo il filo Come si fa 54 Il damasco ritorto Outdoor 62 Per ogni evenienza 63 Arrivano gli S.w.a.t. I Vostri coltelli 65 Lame e calligrafia News 66 Novità e segnalazionicoltelli56 -
Coltelli - Numero 36 - Ottobre/Novembre 2009 - rivista
Rivista a colori Bimestrale prodotta e distribuita in Italia specializzata in coltelli di tutti i tipi (collezione, artigianali, militari, sportivi, multiuso…). 98 Pagine
Ti manca un numero della tua rivista preferita? CLICCA QUI per vedere tutte le riviste disponibili nei nostri magazzini.C2009-36 -
Coltelli - Numero 42 - Ottobre/Novembre 2010 - rivista
Rivista a colori Bimestrale prodotta e distribuita in Italia specializzata in coltelli di tutti i tipi (collezione, artigianali, militari, sportivi, multiuso…). 98 Pagine
Ti manca un numero della tua rivista preferita? CLICCA QUI per vedere tutte le riviste disponibili nei nostri magazzini.C2010-42 -
Coltelli - Numero 44 - Febbraio/Marzo 2011 - rivista
Rivista a colori Bimestrale prodotta e distribuita in Italia specializzata in coltelli di tutti i tipi (collezione, artigianali, militari, sportivi, multiuso…). 98 Pagine
Ti manca un numero della tua rivista preferita? CLICCA QUI per vedere tutte le riviste disponibili nei nostri magazzini.C2011-44 -
Coltelli - Numero 48 - Ottobre/Novembre 2011 - rivista
Rivista a colori Bimestrale prodotta e distribuita in Italia specializzata in coltelli di tutti i tipi (collezione, artigianali, militari, sportivi, multiuso…). 98 Pagine
INDICE:
* Profili: Andrea Rosa
* Profili: Nuovi Maestri CIC Paolo Gidoni e Cesare Tonelli
* Eventi: IX Biennale Resolza e Leppas a Pattada
* Test: Daga Custom Richard C. Weber
* Profili: Il primo chiudibile di Bacchilega
* Storia: Il Falconiere di Kressler
* Test: Fisso di Jarno Movilli
* Tecnica: I materiali per l'impugnatura
* Test: Custom Lappone
* Eventi: Coltello in Festa a Maniago
* Test: Linder Jeans Custom SE
* Test: Coltello del forum della Coltelleria Collini by Fantoni
* Test: Viper chiudibili in ceramica
* Test: Olivetto Arkansas Bowie
* Test: Beltrame Swinguard
* Test: TOPS Tom Brown Tracker
* Test: TOPS Stryker Defender Tool
* Test: TOPS Mil-Spie 5
* Test: TOPS Mountain Lion
* Test: TOPS CQT 5.5
* Storia: Saladini "Lo Scarperia"
* Test: Mora Companion MG
* Test: Ausonia Machete
* Test: Maserin Accetta 952
* Test: MAC Tekno Titanio
* In Cucina: Antonini Onda
* In Cucina: Premax Spelucchini "Il Verdura"C2011-48 -
Coltelli - Numero 49 - Dicembre 2011/Gennaio 2012 - rivista
Rivista a colori Bimestrale prodotta e distribuita in Italia specializzata in coltelli di tutti i tipi (collezione, artigianali, militari, sportivi, multiuso…). 96 Pagine
IN QUESTO NUMERO:
* Personaggi: Daniele Ibba, Maurizio Mattioli, Moreno Franzin
* Tecnica: i segreti dell'acciaio
* Eventi: Culter Expo 2011
* Spade Giapponesi: L'antica tecnica di forgiatura giapponese proposta da Yoshindo Yoshihara
* Test: I nuovi fissi Aitor
* Test: Tank, il carroarmato di Viper
* Manutenzione: Liscio come l'olio, con Victorinox
... e molto altro...C2012-49 -
Coltelli - Numero 50 - Febbraio/Marzo 2012 - rivista
Rivista a colori Bimestrale prodotta e distribuita in Italia specializzata in coltelli di tutti i tipi (collezione, artigianali, militari, sportivi, multiuso…). 96 Pagine
IN QUESTO NUMERO:
* Personaggi: Santino Ballestra, Simone Raimondi
* Custom: Due coltelli per Elias e Piras
* Eventi: CIC Show 2011
* Test: Hogue, la situazione in pugno
* Multimedia: Il sapere in tasca, la tabella acciai su Android
... e molto altro...C2012-50 -
Coltelli - Numero 51 - Aprile/Maggio 2012 - rivista
Rivista a colori Bimestrale prodotta e distribuita in Italia specializzata in coltelli di tutti i tipi (collezione, artigianali, militari, sportivi, multiuso…). 96 Pagine
IN QUESTO NUMERO:
* Personaggi: Santino Ballestra, Max Salice Sanna
* Custom: N. 185 di Sergio Consoli
* Tecnica: C'è Coltello e Coltello; i diversi tipi di lama
* Custom: Mod. 430 di Stefano Trentini
* Eventi: 24esima edizione Esposizione del coltello artigianle custom di Scarperia
* Tecnica: La cura della Nihon-To (lame giapponesi)
* In vetrina: Cold Steel - Rajah
* In vetrina: Microtech: Socom Elite e SF M/A (Select Fire Manual Action)
* Fight Club: i coltelli da combattimento
* In vetrina: Maserin Combat Ready
* In vetrina: Fantoni Hide Limited Edition
... e molto altro...C2012-51 -
Condor - Ascia integrale - coltello
Produttore: Condor - Italy
lunghezza totale: 30 cm
lunghezza lama: 9,5 cm
lunghezza manico: 11,5 cm
peso: 697 gr
tipo acciaio: 420 inox
materiale impugnatura: micarta
note: fodero in cuoio7202€49.18Only 2 left -
CRC - 5-56 - Olio Sbloccante Lubrificante Anticorrosivo Idroespellente
Confezione promozionale da 200ml: penetra, sblocca, deterge, lubrifica, espelle l'umidità, arresta ed impedisce la corrosione, elimina le dispersioni elettriche.
Penetra profondamente riducendo la tensione superficiale all'interfaccia metallo/ossido; sblocca dadi, raccordi e cerniere.
Espelle l'umidità dalle fesure più minute. Non contiene siliconi. Non altera la conducibilità dei contatti. Consente l'avviamento di motori bagnati. Impedisce la formazione del ghiaccio.
Energico solvente di grassi, catrame e residui della combustione. Deterge carburatori, catene di moto, mozzi ruota, pistoni di ammortizzatori ecc.
Elimina i cigolii e lubrifica le parti più profonde di serrature, cardini, lucchetti, comandi a cavetto ecc..6443€12.30Only 2 left -
CRC - 6-66 Marine - Olio per arrestare e impedire la corrosione - accessori coltelli
Confezione da 200m. - Olio concepito per utilizzi marini in presenza di acqua salmastra: penetra, sblocca, espelle l'umidità, arresta ed impedisce la corrosione, elimina le dispersioni elettriche, deterge e lubrifica.
Per attrezzature subacquee: penetra profondamente riducendo la tensione superficiale all'interfaccia metallo/ossido arrestanto processi corrosivi in corso unendosi polarmente ai metalli impedendone l'ossidazione, specialmente in ambiente salmastroso.
Espelle l'umidità, Elimina l'effetto cortocircuitante e la dispersioni a massa dovute agli elettroliti. Non contiene siliconi. Non altera la conducibilità dei contatti. Consente l'avviamento di motori bagnati.
Energico detergente. Elimina patine di morchia o grumi untuosi e salati che possono determinare dispersione di corrente o innescare processi corrosivi.
Riduce il coefficiente di attrito e svolge un'efficace azione lubrificante.6434€12.30Only 2 left -
CRC - Gun Store - Olio Protettivo a lunga durata - accessori coltelli
Flacone da 200ml.
Protegge spade, coltelli ed armi da fuoco durante lunghi periodi di inutilizzo.
Forma un film oleoso non essiccante che rende ogni tipo di metallo e acciaio inattaccabile da qualunque agente atmosferico. Neutralizza l'effetto corrosivo delle ceneri e del contatto con le mani. Espelle e respinge l'umidità. Al coperto ed in condizioni ambientali normali impedisce la corrosione per un periodo di circa dua anni.
Su armi da fuoco non occorre rimuoverlo pria dell'uso; in caso di necessità si può comunque asportare con CRC GUN CARE che deterge e assicura una protezione e lubrificazione più compatibile con un utilizzo costante.6432€12.30Only 2 left -
Hubertus Solingen - Outdoor knife - Vintage - sports knife
Type of production: industrial
Blade: 440 stainless steel
Blade treatment: -
Blade production: -
Handle: aluminum
Blade length: 11mm.
Blade thickness: 4.5mm.
Closed Length: -
Total length: 225mm.
Balancing: -
Weight: 144g.
Closure:
Clip: -
Sheath: in leather
Note: -HS-V-OUT€45.08Only 2 left -
Leatherman - Fodero MOLLE Black 4" - 931005 - Accessori
Compatibile con le seguenti pinze Leatherman:
* Sidekick
* Wingman
* Blast
* Kick
* Fuse
* Crunch
* Wave
* Charge
Fodero in pesante e robusto Nylon con chiusura in velcro e passante da cintura sia per porto orizzontale che per porto verticale. Dotato di attacchi standard di tipo M.O.L.L.E.LE931005 -
Mondin - 16cm cleaver with Collini blade cover - Kitchen knife
Recommended use: Processing raw meat, bone and cartilage.
Country of manufacture: Italy
Blade: Surgical steel 54-56 HRC
Handle: Non-toxic, non-deformable, impact-resistant Nylon 6/6, perfectly sterilizable up to 180°.
Blade length: 16cm.
Total length: 30cm.
Weight: 519g.
M16€20.49Only 3 left -
Artigiano Scarperia - Love Knife Fusetto in Deer - hand-engraved - handmade knife
In some areas of central and southern Italy, it was customary to give knives as engagement or wedding gifts, assigning the knife the task of sanctioning the love bond.
There was a strong identification between man and knife: the lover who gave such a gift to the woman symbolically offered himself, while the gift given to the man could be interpreted as an exhortation to virile valor.
Some specimens of this historical knife also served as protection against the evil eye, featuring the characteristic “dice eyes” on the handle, while the blades were traditionally engraved with decorative and symbolic elements.
The love knives were also indicative of the social class of the family: less wealthy couples, unable to afford very elaborate knives, sanctioned their love with simpler, less worked, and less expensive objects, but identical in values and meanings.
Type of production: artisanal
Blade production: Italy
Blade: Stainless steel C70
Blade treatment: -
Handle: Deer horn with buffalo horn inserts and silver plaque
Blade length: 82mm.
Blade thickness: 2mm.
Closed length: 100mm.
Total length: 183mm.
Weight: 54g.
Closure: without blade lock
Packaging: cardboard packaging with certificatesThe brand Artigiano Scarperia was established in 2007 by two expert knife makers, Fabio Gasparrini and Alessandro Conti. Drawing inspiration from ancient art, they create refined cutlery for the kitchen and table, assortments of personal care items and office supplies, as well as various objects in horn and wood. All products are handcrafted, using traditional techniques without the use of machinery.
For this reason, any variations in material and workmanship are not considered flaws, but distinctive features of a unique product, handcrafted and of high quality.
AP-CAFB€0.00Only -50 leftOut of stock -
Treeman Knives - Recon Hunter Knife - Green G-10 - PRIVATE COLLECTION - knife
KNIFE FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Overall in very good condition
* Commercially available: No longer in production
* Sharpening: Factory
* Marks on blade: No
* Marks on handle: No
* Box: Not present
* Scabbard: In Kydex
* Manuals, Certificates and Warranties: NO
* Checked and certified by our internal laboratoryIntended Use: Tactical/Collection
Production Type: Semi-Industrial
Country of manufacture: USA
Blade: Carbon steel O1
Blade treatment: Grey Cerakote
Handle: G-10 Green
Blade length: 110mm. (100m. cutting edge)
Blade thickness: 4.6mm.
Total length: 230mm.
Balance: set back approx. 3 cm from the edge of the cheek piece
Weight: 260g. (353g. including scabbard)
Sheath: Kydex, with Kydex belt attachment
Packaging: Without box and certificates
Notes: -AP-TREE-RECON€0.00Only -20 leftOut of stock -
Bark River - Bravo 1 Field Knife - Mil-Spec - Camo G-10 - COLLEZIONE PRIVATA - coltello
COLTELLO RITIRATO DA COLLEZIONE PRIVATA
* Tipologia: Precedentemente Acquistato
* Condizioni: Globalmente in buone condizioni
* Reperibile in commercio: non più in produzione
* Affilatura: Di fabbrica
* Segni su lama: Leggeri
* Segni su impugnatura: No
* Scatola: Non presente
* Fodero: In Cuoio
* Manuali, Certificati e Garanzie: NO
* Controllato e Certificato dal nostro laboratorio internoDestinazione d'uso: Tattico/Collezione
Tipo di produzione: Semi-Industriale
Paese di produzione: USA
Lama: in acciaio inox CPM-S35VN
Trattamento lama: satinatura
Manicatura: G-10 Camo
Lunghezza lama: 110mm.
Spessore lama: 5.5mm.
Lunghezza totale: 244mm.
Bilanciatura: arretrata di circa 2 cm dal bordo della guancetta
Peso: 240g. (350g. fodero compreso)
Fodero: In cuoio
Confezione: privo di scatola e certificati
Note: -AP-BRAVO1 -
Charlton Ltd - Custom Damascus Bob Lum style Tanto - handcrafted knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased - knife dating back to the late 80s
* Condition: excellent condition
* Commercially available: Discontinued since 2018
* Sharpening: Factory
* Marks on blade: No
* Signs on the handle: very small marks
* Box: packaging
* Sheath: in wood
* Manuals, Certificates and Warranties: -
* Checked and Certified by our internal laboratoryIntended use: Collection / Vintage
Type of production: handcrafted
Country of production: USA
Blade: hand forged Damascus steel
Blade treatment: -
Handle: in wood
Blade length: 110mm.
Blade thickness: 5.5mm.
Total length: 230mm.
Weight: 245g.
Scabbard: wooden scabbard
Notes: limited edition 1 of 200AP-CHLTD€0.00Only -50 leftOut of stock -
Denis Simonutti - Mist - Limited Edition #4 - M390 Black PVD Titanium - Craft Knife
Intended Use: Collection
Type of production: Midtech
Country of Production: Italy
Blade: Stainless steel M390 58/60HRC
Blade Treatment: PVD Blacwashed
Handle: Titanium with PVD Blacwashed treatment and bronze-colored anodized titanium spacers
Blade length: 78mm.
Blade thickness: 3mm.
Length closed: 102mm.
Total length: 180mm.
Weight: 110g.
Closure: FrameLock
Clip: Bronze-colored anodized titanium, machined from solid
Packaging: Denim pouch, warranty certificate, Velcro patch, small 6-sided playing dice
Notes: Designed and made by Denis Simonutti - Specimen number 4 of a micro-production batch of only 10 piecesDS-MIST4€0.00Only -50 leftOut of stock -
Le Petit Jouter - Oyster Opener Knife - Oyster Shells
Oyster Knife
Presitigious Oyster Opener with handle made of stabilized oyster shells.
Made in France craftsmanship.
The "Le Petit Jouteur" professional oyster knife has a 2.5 mm thick stainless steel blade.
High quality, very hard and ultra-strong, thanks to a heat treatment process by cryogenization.
An ambidextrous oyster spear blade.
A minimum of care and maintenance ,
will enable you to keep your oyster knife in a condition that will amaze you for many years.
A nice discovery that of this oyster knife.
At last a useful and well-designed knife.
It should be mentioned that its designer, Benjamin Auzier, is a designer at @Laguiole.
He had the good idea of surrounding himself with oyster professionals from the Mediterranean basin.
He envisioned a tool that both left-handed and right-handed people can use without risk and with formidable efficiency. His workshop is located in La Boissière, in the Hérault.
The originality of its balanced and symmetrical teardrop shape over a length of 12 centimeters suits all hand morphologies.
If you want to have a practical professional tool for opening shellfish, the Little Juggler is for you.
Or for an original gift to a family member or friend.
8169O-C€45.08Only 0 leftOut of stock -
Leatherman - Ainsworth 4" Premium Leather Sheath - 934935 - Accessories
The Ainsworth sheath is made in Slovakia with premium full-grain leather, tanned with plant extracts and offers premium protection for your tool.
It is the best we have created to date. The Ainsworth leather sheath is made from drum-dyed, full-grain, vegetable-tanned cowhide. This treatment makes the leather fine and able to improve with time. The snap, customized button keeps your tool safe over years of use.
This sheath is premium protection for your Leatherman and is covered by our two-year warranty. It fits belts up to 4.5 cm wide. Internal capacity: 10.2 x 3.8 x 2 cm
Compatible with the following Leatherman pliers:
* Free P2
* Free P4
* Charge+
* Wave+
* Wingman
* Sidekick
* Rev
* Rebar
* SkeletoolLE934935 -
BlackJack - Model 5 knife - A2 - Green Canvas Micarta - outdoor knife
Intended use: hunting / sports / collection
Type of production: industrial
Blade: A2 carbon steel
Production Lama: USA
Handle: Green Canvas micarta
Blade length: 140mm.
Blade thickness: 5mm.
Closed Length: -
Total length: 270mm.
Balancing: -
Weight: 262g.
Closure: -
Clip: -
Sheath: Brown Leather
Notes: made by Bark RiverBCB5GM -
Leatherman - 3-Way Magnetic Ratchet Screwdriver - 931030 - Accessories
Magnetic bit holder that allows secure positioning of both Leatherman flat and standard 63mm bits.
Compact 3-way ratchet system that allows continuous rotation in one direction, avoiding tool repositioning. The 3-way allows for a forward, reverse and locked setting.
SPECIFICATIONS
Length: 8.28 cm
Weight: 35.7 gCOMPATIBILITY:
* MUT (all versions)
* Charge (all versions)
* Charge+ (all versions)
* Signal (all versions)
* Skeletool (all versions)
* Super Tool 300M
* Surge (all versions)
* Wave (all versions)
* Wave+ (all versions)LE931030 -
E.G. Custom - Hunting knife - horn and briar handle - entirely handmade
handcrafted knife entirely handmade with grinding wheel and file. The blade is made of ledeburitic steel with 2.3% carbon obtained by powder metallurgy and reaches a hardness of 64 HRC. Perfect for hunting and outdoor use.
Intended use: collection / hunting
Type of production: custom
Production Lama: USA
Blade: 64HRC powder steel
Blade treatment: -
Handle: in deer horn and tuya burl with brass guard
Blade length: 100mm.
Blade thickness: 5mm.
Total length: 240mm.
Weight: 172g.
Sheath: in brown leather sewn and handmade
Notes: knife made in Italy in the late 90s - certificate of the craftsmanCUS-1€0.00Only -20 leftOut of stock -
Indiana - Hunting knife Gran Safari - in deer horn - vintage knife
Rare hunting knife produced around the 1980s by the Indian company from Maniago. This extremely innovative knife for the years of production, is characterized by a handle entirely made of aluminum with natural horn insert. Excellent blade geometry for hunting and outdoor use
Intended use: Collection
Type of production: semi-artisanal
Blade: 440 stainless steel
Production Lama: Italy
Handle: aluminum and horn
Blade length: 90mm.
Blade thickness: 3mm.
Closed length: 125mm.
Total length: 220mm.
Balancing: -
Weight: 125g.
Closure: back lock
Clip:
Sheath: -
Note: -IN-HU-CO€172.13Out of stock -
Indiana - Hunting knife Gran Safari - buffalo horn - vintage knife
Rare hunting knife produced around the 1980s by the Indian company from Maniago. This extremely innovative knife for the years of production, is characterized by a handle entirely made of aluminum with natural horn insert. Excellent blade geometry for hunting and outdoor use
Intended use: Collection
Type of production: semi-artisanal
Blade: 440 stainless steel
Production Lama: Italy
Handle: aluminum and horn
Blade length: 90mm.
Blade thickness: 3mm.
Closed length: 125mm.
Total length: 220mm.
Balancing: -
Weight: 125g.
Closure: back lock
Clip:
Sheath: -
Note: -IN-HU-BU€229.51Out of stock -
Indiana - Set 3 pieces miniature knives - Survival Tanto series - collection knife
Faithful miniature reproduction of survival knives produced in Italy around the 90s
Intended use: Collection / Keychain
Type of production: semi-artisanal
Blade: 420 stainless steel
Production Lama: Italy
Handle: brass with unscrewable rear cap
Sheath: vinyl cordura sheath
Big Knife
Blade length: 75mm.
Blade thickness: 2mm.
Total length: 130mm.
Weight: 36g.Medium Knife
Blade length: 60mm.
Blade thickness: 2mm.
Total length: 90mm.
Weight: 15g.Small Knife
Blade length: 30mm.
Blade thickness: 2mm.
Total length: 50mm.
Weight: 3g.IN-SET1€0.00Only -20 leftOut of stock -
Wildrock Gear - Strikeback Tomahawk Desert Camo - D2 steel - ax
Strikeback Tomahawk is designed to work in any condition. Built and designed for heavy use, the Strikeback, thanks to its simple and clean design, manages to perfectly combine balancing and maneuverability characteristics. The body is made of high quality D2 steel and is skeletonized to help reduce weight and improve structural rigidity and balance. The Gun-kote surface coating increases its wear resistance and protects against corrosion.
Intended use: Tactical / Allround
Type of production: industrial
Blade: Bohler D2 steel (56 Hrc)
Blade treatment: Gun-kote
Lama production: Italy
Handle: G-10 Camo
Head length: 199mm.
Blade thickness: 8mm.
Blade length: 101mm.
Total length: 400mm.
Balancing: -
Weight: 1080g.
Closing: -
Clip: -
Sheath: Compatible soft Kydex sheath
Use: Cutting | Hammering | Digging | Breaking | SmashingWRK-TOM-DC€401.64Only 0 leftOut of stock -
Wildrock Gear - Strikeback Tomahawk Camo - D2 steel - ax
Strikeback Tomahawk is designed to work in any condition. Built and designed for heavy use, the Strikeback, thanks to its simple and clean design, manages to perfectly combine balancing and maneuverability characteristics. The body is made of high quality D2 steel and is skeletonized to help reduce weight and improve structural rigidity and balance. The Gun-kote surface coating increases its wear resistance and protects against corrosion.
Intended use: Tactical / Allround
Type of production: industrial
Blade: Bohler D2 steel (56 Hrc)
Blade treatment: Gun-kote
Lama production: Italy
Handle: G-10 Camo
Head length: 199mm.
Blade thickness: 8mm.
Blade length: 101mm.
Total length: 400mm.
Balancing: -
Weight: 1080g.
Closing: -
Clip: -
Sheath: Compatible soft Kydex sheath
Use: Cutting | Hammering | Digging | Breaking | SmashingWRK-TOM-C€401.64Only 0 leftOut of stock