Knives, collection knife, tactical knives, outdoor knives, pocket knives and tools
-
Leatherman - 4.5" Nylon Sheath with Pockets for Signal and Surge - 934933 - Replacement Accessories
Protect your multifunction tool with these revised nylon sheaths.
Every detail is designed to ensure the cases last a long time, are reliable and easy to use. High-quality metal rivet snap allows for a secure closure that keeps the tool safe.
It is made of durable stretch ballistic nylon with reinforced seams for better accessibility and fit. Extra pockets in this nylon sheath are made to carry a bit kit, a bit extender, and a small flashlight or marker. It fits belts up to 4.5 cm wide. The overall fit may vary depending on the accessories carried.
COMPATIBILITY.
* Free P2
* Free P4
* Signal
* Super Tool
* Surge
INTERNAL DIMENSIONS
12 x 3.8 x 2 cmLE934933 -
Leatherman - Thread Cutter Replacement Kit - 930350 - Accessories
Wire cutter replacement kit includes a set of replacement wire cutter inserts, two screws and a #8 Torx screwdriver for installation. Wire cutter inserts are made of premium stainless steel.
COMPATIBLE WITH:
* MUT®
* OHT
* Charge®+
* Charge®+ Forest Camo
* Charge®+ TTi
* Rebar
* Heritage Rebar
* Super Tool® 300+
* Heritage Super Tool 300
* Surge
* Surge® black and silver
* Wave®+
* Wave® black and silver
* Heritage Wave+
* Heritage Charge+
* FREE™ P2
* FREE™ P4
* Signal
* Signal® Topo
* Charge®+ G10
* 2H WaveLE930350 -
Carl Schlieper - Folder Classic knife - micarta - vintage 90s - knife
Carl Schlieper Stahlwarenfabrik & Export was originally a trading company founded between 1754 and 1798 in Remscheid in Germany. Products included knives, tools and freehand razors. A branch of the company in Solingen was engaged in the production of knives including slipjoint, automatic knives, daggers, machetes, bowie, razors and kitchen knives. Over the years, various brands and 22 patents held by the company have been created and thousands of pieces sold worldwide. Carl Schlieper was liquidated for bankruptcy in 1993. The production of the brand was subsequently acquired by Freidrich Olbertz in Solingen.
Traditional pocket knife with micarta handle - knife made in Germany in the 90s.
Intended use: Collection
Blade: stainless steel
Production Lama Germany
Handle: nickel silver and micarta
Primary blade length: 70mm.
Total length: 173mm.
Balancing: -
Weight: 107gr.
Closure: Back Lock
Clip:
Sheath: -
Note: -CS-FO-GMI -
Carl Schlieper - Poket knife - micarta - vintage 90s - knife
Carl Schlieper Stahlwarenfabrik & Export was originally a trading company founded between 1754 and 1798 in Remscheid in Germany. Products included knives, tools and freehand razors. A branch of the company in Solingen was engaged in the production of knives including slipjoint, automatic knives, daggers, machetes, bowie, razors and kitchen knives. Over the years various brands and 22 patents held by the company have been created and thousands of pieces sold worldwide. Carl Schlieper was liquidated for bankruptcy in 1993. The production of the brand was subsequently acquired by Freidrich Olbertz in Solingen.
Traditional pocket knife with micarta handle - knife made in Germany in the 90s.
Intended use: Collection
Blade: stainless steel
Production Lama Germany
Handle: nickel silver and micarta
Primary blade length: 60mm.
Total length: 155mm.
Balancing: -
Weight: 81gr.
Closure: Back Lock
Clip:
Sheath: -
Note: -CS-FO-MI -
Carl Schlieper - Poket knife - wood - vintage 90s - knife
Carl Schlieper Stahlwarenfabrik & Export was originally a trading company founded between 1754 and 1798 in Remscheid in Germany. Products included knives, tools and freehand razors. A branch of the company in Solingen was engaged in the production of knives including slipjoint, automatic knives, daggers, machetes, bowie, razors and kitchen knives. Over the years various brands and 22 patents held by the company have been created and thousands of pieces sold worldwide. Carl Schlieper was liquidated for bankruptcy in 1993. The production of the brand was subsequently acquired by Freidrich Olbertz in Solingen.
Traditional pocket knife with wooden handle - knife made in Germany in the 1990s.
Intended use: Collection
Blade: stainless steel
Production Lama Germany
Handle: nickel silver and wood
Primary blade length: 60mm.
Total length: 155mm.
Balancing: -
Weight: 82gr.
Closure: Back Lock
Clip:
Sheath: -
Note: -CS-FO-LE -
Leatherman - MOLLE Black XL sheath - LE930371 - Accessories
Compatible with the following Leatherman pliers:
* MUT®
* MUT® EOD
* Super Tool® 300
* Super Tool® 300 EOD
* Original Surge®
* Surge®
* Heritage Super Tool® 300
Heavy and robust nylon lining with Velcro closure and belt loop for both horizontal and vertical ports. Equipped with standard connections of the M.O.L.L.E. typeLE930366 -
Leatherman - Skeletool KB - folding knife
Intended use: Sports
Type of production: Industrial
Country of production: USA
Blade: 420HC stainless steel
Blade treatment: Satind
Handle: 6061-T6 aluminum
Blade length: 66mm.
Blade thickness: 2.6mm.
Length closed: 87mm.
Overall length: 151mm.
Thick when closed: 11mm.
Balancing: -
Weight: 38g.
Opening: hole on the blade
Washers: in brass
Closure: Liner Lock
Clip: stainless steel, removable, with the function of a bottle opener
Sheath: -
Packaging: Cardboard box with Leatherman logos
Note: -LE832385 -
Leatherman - Fodero MOLLE Black 4" - 931005 - Accessori
Compatibile con le seguenti pinze Leatherman:
* Sidekick
* Wingman
* Blast
* Kick
* Fuse
* Crunch
* Wave
* Charge
Fodero in pesante e robusto Nylon con chiusura in velcro e passante da cintura sia per porto orizzontale che per porto verticale. Dotato di attacchi standard di tipo M.O.L.L.E.LE931005 -
Carl Schlieper - Survival Companion Knife - Vintage - PRIVATE COLLECTION - knife
Knife from a private collection - presumably produced in the early 1980s - overall in excellent condition, with factory sharpening - accompanied by original leather sheath - checked and certified by our in-house laboratory.
* Type: Previously purchased
* Condition: in like new condition
* Available on the market: no longer in production, difficult to find, dating back to the 80s
* Sharpening: Original
* Marks on the blade: no
* Marks on the handle: no
* Box:-
* Sheath: in leather
* Manuals, Certificates and Warranties: -
* Checked and certified by our internal laboratoryCarl Schlieper Stahlwarenfabrik & Export was originally a trading company founded between 1754 and 1798 in Remscheid in Germany. Products included freehand knives, tools and razors. A branch of the company in Solingen was engaged in the production of knives including slipjoint, automatic knives, daggers, machetes, bowie, razors and kitchen knives. Over the years various brands and 22 patents held by the company have been created and thousands of pieces sold worldwide. Carl Schlieper was liquidated for bankruptcy in 1993. The production of the brand was subsequently acquired by Freidrich Olbertz in Solingen.
Intended use: Collection / Survival
Type of production: industrial
Blade: 440A Ice Tempered stainless steel
Country of production: Germany
Handle: brass, coated with synthetic material, hollow inside (useful space approx. 50mm. X 14mm.) With screw cap
Blade length: 185mm. (length of serration on the back 95mm.)
Blade thickness: 4.8mm.
Total length: 304mm.
Balancing: on the guard
Weight: 400g.
Sheath: in leather, with pocket containing a sharpening stone
Notes: knife from the early 1980s, from a private collection, overall in excellent conditionCS-SCK-CP-1 -
Carl Schlieper - Vintage Survival Companion Bowie - PRIVATE COLLECTION - knife
Knife from a private collection - presumably produced in the early 1980s - overall in excellent condition, with factory sharpening - accompanied by original leather sheath - checked and certified by our in-house laboratory.
Carl Schlieper Stahlwarenfabrik & Export was originally a trading company founded between 1754 and 1798 in Remscheid, Germany. Products included knives, tools and freehand razors. A branch of the company in Solingen was involved in the production of knives including slipjoint, automatic knives, daggers, machetes, bowies, razors, and kitchen knives. Over the years, several trademarks were created and 22 patents held by the company and millions of pieces sold worldwide. Carl Schlieper was liquidated by bankruptcy in 1993. Production of the brand was later acquired by Freidrich Olbertz in Solingen.
Intended use: Collection/Survival
Type of production: industrial
Blade: stainless steel 440A Ice Tempered
Country of manufacture: Germany
Handle: brass, synthetic coated, hollow inside (usable space approx. 50mm. x 14mm.) with screw cap
Blade length: 185mm. (serrated length on back 95mm.)
Blade thickness: 4.8mm.
Total length: 304mm.
Balance: on the guard
Weight: 400g.
Sheath: leather, with pocket containing a sharpening stone
Notes: knife from the early 1980s, from a private collection, overall in very good conditionCS-SCK-CP -
Leatherman - Ainsworth 4" Premium Leather Sheath - 934935 - Accessories
The Ainsworth sheath is made in Slovakia with premium full-grain leather, tanned with plant extracts and offers premium protection for your tool.
It is the best we have created to date. The Ainsworth leather sheath is made from drum-dyed, full-grain, vegetable-tanned cowhide. This treatment makes the leather fine and able to improve with time. The snap, customized button keeps your tool safe over years of use.
This sheath is premium protection for your Leatherman and is covered by our two-year warranty. It fits belts up to 4.5 cm wide. Internal capacity: 10.2 x 3.8 x 2 cm
Compatible with the following Leatherman pliers:
* Free P2
* Free P4
* Charge+
* Wave+
* Wingman
* Sidekick
* Rev
* Rebar
* SkeletoolLE934935 -
Carl Schlieper - Survival Companion Knife - Vintage knife
Carl Schlieper Stahlwarenfabrik & Export was originally a trading company founded between 1754 and 1798 in Remscheid, Germany. Products included knives, tools and freehand razors. A branch of the company in Solingen was responsible for the production of knives including slipjoint, automatic knives, daggers, machetes, bowies, razors and kitchen knives. Over the years, several trademarks were created and 22 patents held by the company and millions of pieces sold worldwide. Carl Schlieper was liquidated through bankruptcy in 1993. Production of the brand was subsequently taken over by Freidrich Olbertz in Solingen.
Survival knife produced in Germany since the 1970s.
Intended use: Collection/Survival
Type of production: industrial
Blade: ICE TEMPERED stainless steel, PVD coated
Country of production: Germany
Handle: brass coated with synthetic material, hollow inside (usable space approx. 50mm. x 14mm.) with screw cap with o-ring
Blade length: 185mm. (serrated length on back 95mm.)
Blade thickness: 4.8mm.
Total length: 304mm.
Balance: on the guard
Weight: 401g. (609G. scabbard included)
Scabbard: leather, with pocket containing a sharpening stone
Notes: original cardboard boxTranslated with www.DeepL.com/Translator (free version)
CS-SUR-COMP -
Leatherman - 3-Way Magnetic Ratchet Screwdriver - 931030 - Accessories
Magnetic bit holder that allows secure positioning of both Leatherman flat and standard 63mm bits.
Compact 3-way ratchet system that allows continuous rotation in one direction, avoiding tool repositioning. The 3-way allows for a forward, reverse and locked setting.
SPECIFICATIONS
Length: 8.28 cm
Weight: 35.7 gCOMPATIBILITY:
* MUT (all versions)
* Charge (all versions)
* Charge+ (all versions)
* Signal (all versions)
* Skeletool (all versions)
* Super Tool 300M
* Surge (all versions)
* Wave (all versions)
* Wave+ (all versions)LE931030 -
Brian Tighe and Friends - Tighe Fighter Large knife Blackwash Grey Aluminum Flipper - 1100-3BG - knife
Intended use: collection
Type of production: mid tech
Country of production: USA
Blade: CPM-154CM stainless steel
Blade treatment: Blackwash
Handle: Aluminum
Blade length: 94mm.
Blade thickness: 5mm.
Length closed: 130m.
Total length: 226mm.
Thick when closed: 16mm.
Weight: 128g.
Closing: Plunge Lock
Clip: in steel
Notes: numbered series
Packaging: in cardboard with Brian Tighe and Friends logos, Design by Brian Tighe, opening system on IKBS type ball bearings with Carson Flipper type openingBT-1100-3BG -
Brian Tighe and Friends - Tighe Fighter Large Fixed Carbon Fiber - 1104-1 - knife
Destination of use: collection
Type of production: mid tech / semi-custom
Country of production: USA
Blade: 154CM stainless steel
Blade treatment: Satin
Handle: Carbon fiber
Blade length: 124mm.
Blade thickness: 6.3mm.
Total length: 254mm.
Balancing: on the guard branch
Weight: 220g.
Sheath: Kydex
Packaging: cardboard with logos Brian Tighe and Friends, Design by Brian Tighe
Notes: numbered seriesBT1104-1 -
Brian Tighe and Friends - Tigers Fighter Large knife G10 Flipper - 1100-3 - knife
Destination of use: collection
Type of production: semi-custom
Lama production: USA
Blade: 154CM stainless steel
Lama treatment: Satin
Handle: G10
Blade length: 94mm.
Blade thickness: 5mm.
Length closed: 130m.
Total length: 226mm.
Thick when closed: 16mm.
Balancing: -
Weight: 134g.
Closing: Plunge Lock
Clip: in steel
Notes: numbered series
Packaging: cardboard with logos Brian Tighe and Friends, Design by Brian Tighe, opening system on ball bearings of type IKBS with Carson Flipper openingBT1100-3 -
Brian Tighe and Friends - Tighe Breaker Small Integral Pinball - 1202-1 - knife
Destination of use: collection
Type of production: semi-custom
Lama production: USA
Blade: CPM S30V stainless steel
Lama treatment: Satin
Handle: titanium
Blade length: 84mm.
Blade thickness: 3mm.
Length closed: 115mm.
Total length: 204mm.
Thick when closed: 12mm.
Balancing: -
Weight: 114g.
Closing: Plunge Lock
Clip: titanium
Notes: numbered series
Packaging: cardboard with logos Brian Tighe and Friends, Design by Brian Tighe, opening system on ball bearings of type IKBS with Carson Flipper openingBT1202-1 -
Stedemon Knife Co. - ZKC C02 Jade Flipper - STEZKCC029 - Knife
Purpose of use: Sportsman
Type of production: Industrial
Country of production: China
Blade: Stainless steel 440C 58HRC
Handle: G10
Blade Length: 88mm.
Blade thickness: 4mm.
Closed length: 130mm.
Total length: 220mm.
Weight: 134g.
Closure: Liner Lock
Clip: stainless steel
Packing: cardboard box with logos Stedemon Knife Co.
Notes: Opening through the Carson Flipper system - movement on ball bearingsSTEZKCC029€77.87Out of stock -
Stedemon Knife Co. - ZKC D01 Blue Flipper - STEZKC01SW - Knife
Purpose of use: Sportsman
Type of production: Industrial
Country of production: China
Blade: Stainless steel 440C 58HRC
Handle: G10
Blade Length: 95mm.
Blade thickness: 3mm.
Closed length: 130mm.
Total Length: 230mm.
Weight: 142g.
Closure: Liner Lock
Clip: stainless steel
Packing: cardboard box with logos Stedemon Knife Co.
Notes: Opening through the Carson Flipper system - movement on ball bearingsSTEZKC01SW€0.00Only -20 leftOut of stock -
Fox/Combative Edge - M1 Plain - CED-01 - coltello
Destinazione d'uso: Tattico / Collezione
Tipo di produzione: Industriale
Produzione Lama: Italia
Lama: In acciaio inox N690Co 58HRC
Trattamento Lama: DLC
Manicatura: G-10 e titanio
Lunghezza lama: 95mm. filo liscio
Spessore lama: 4mm.
Lunghezza chiuso: 130mm.
Lunghezza totale: 225mm.
Spessore da chiuso senza clip: 10mm.
Bilanciatura: -
Peso: 152g.
Chiusura: Frame Lock
Clip: in acciaio inox
Fodero: -7728 -
Fox/Combative Edge - Salus - FX-CED-M2 - coltello
Destinazione d'uso: Tattico/Militare
Tipo di produzione: Industriale
Produzione Lama: Italia
Lama: full tang, in acciaio inox N690Co
Trattamento Lama: Ti-Ni
Manicatura: G-10
Lunghezza lama: 150mm.
Spessore lama: 5mm.
Lunghezza chiuso: -
Lunghezza totale: 275mm.
Spessore da chiuso: -
Bilanciatura: -
Peso: 304g.
Chiusura: -
Clip: -
Fodero: Kydex e Nylon
Confezione: Scatola di cartone con loghi Fox
Note:7743 -
Fox/Combative Edge - SR11 Plain - FX-CED-M3 coltello
Destinazione d'uso: Tattico / Collezione
Tipo di produzione: Industriale
Produzione Lama: Italia
Lama: In acciaio inox N690Co 58HRC
Trattamento Lama: DLC
Manicatura: G-10 e Titanio
Lunghezza lama: 95mm
Spessore lama: 4mm.
Lunghezza chiuso: 122mm.
Lunghezza totale: 212mm.
Spessore da chiuso senza clip: 10mm.
Bilanciatura: -
Peso: 144g.
Chiusura: Frame Lock
Clip: in acciaio inox
Fodero: -7741 -
Fox/Combative Edge - SR11S Serrated - FX-CED-M3S - coltello
Destinazione d'uso: Tattico / Collezione
Tipo di produzione: Industriale
Produzione Lama: Italia
Lama: In acciaio inox N690Co 58HRC
Trattamento Lama: DLC
Manicatura: G-10 e Titanio
Lunghezza lama: 95mm
Spessore lama: 4mm.
Lunghezza chiuso: 122mm.
Lunghezza totale: 212mm.
Spessore da chiuso senza clip: 10mm.
Bilanciatura: -
Peso: 144g.
Chiusura: Frame Lock
Clip: in acciaio inox
Fodero: -7741S