Knives, collection knife, tactical knives, outdoor knives, pocket knives and tools

Skinny, LionSteel's versatile new folding knife, features a SOLID billet construction and a CPM-MagnaCut steel blade.

It is opened incredibly smoothly via a flipper system supported by IKBS ball bearings, with the option of removing the flipper tab to comply with carry regulations found in some nations transforming the knife into a two-handed opening pocket knife. 

The sturdy SOLID handle is made of titanium or aluminum, with carbon fiber or micarta inserts. Both versions feature a Frame Lock type locking system and a removable and reversible pocket clip. 

Intended Use: Sporting / EDC

Production Type: Industrial
Country of Production: Italy
Blade: CPM MagnaCut 62/63HRC steel
Blade finish: Stonewashed
Handle: Titanium billet with forged carbon fiber insert
Blade length: 84mm.
Blade thickness: 4mm.
Total length: 200mm.
Weight: 92g.
Closure: Frame Lock with stainless steel casement
Clip: stainless steel, reversible and removable
Packaging: cardboard box with LionSteel logos
Notes: CNC machined Solid Frame Lock construction machined entirely from billet - Removable Carson Flipper opening system - IKBS ball bearing opening movement

Skinny, LionSteel's versatile new folding knife, features a SOLID billet construction and a CPM-MagnaCut steel blade.

It is opened incredibly smoothly via a flipper system supported by IKBS ball bearings, with the option of removing the flipper tab to comply with carry regulations found in some nations transforming the knife into a two-handed opening pocket knife. 

The sturdy SOLID handle is made of titanium or aluminum, with carbon fiber or micarta inserts. Both versions feature a Frame Lock type locking system and a removable and reversible pocket clip. 

Intended Use: Sporting / EDC

Production Type: Industrial
Country of Production: Italy
Blade: CPM MagnaCut 62/63HRC steel
Blade finish: Stonewashed
Handle: Titanium billet with forged carbon fiber insert
Blade length: 84mm.
Blade thickness: 4mm.
Total length: 200mm.
Weight: 92g.
Closure: Frame Lock with stainless steel casement
Clip: stainless steel, reversible and removable
Packaging: cardboard box with LionSteel logos
Notes: CNC machined Solid Frame Lock construction machined entirely from billet - Removable Carson Flipper opening system - IKBS ball bearing opening movement

Skinny, LionSteel's versatile new folding knife, features a SOLID billet construction and a CPM-MagnaCut steel blade.

It is opened incredibly smoothly via a flipper system supported by IKBS ball bearings, with the option to remove the flipper tab to comply with carry regulations found in some nations transforming the knife into a two-handed opening pocket knife. 

The sturdy SOLID handle is made of titanium or aluminum, with carbon fiber or micarta inserts. Both versions feature a Frame Lock type locking system and a removable and reversible pocket clip. 

Intended Use: Sporting / EDC

Production Type: Industrial
Country of Production: Italy
Blade: CPM MagnaCut 62/63HRC steel
Blade finish: Blackwashed OldBlack
Handle: billet aluminum with micarta insert
Blade length: 84mm.
Blade thickness: 4mm.
Total length: 200mm.
Weight: 72g.
Closure: Frame Lock with stainless steel casement
Clip: stainless steel, reversible and removable
Packaging: cardboard box with LionSteel logos
Notes: CNC machined Solid Frame Lock construction machined entirely from billet - Removable Carson Flipper opening system - IKBS ball bearing opening movement

Skinny, LionSteel's versatile new folding knife, features a SOLID billet construction and a CPM-MagnaCut steel blade.

It is opened incredibly smoothly via a flipper system supported by IKBS ball bearings, with the option to remove the flipper tab to comply with carry regulations found in some nations transforming the knife into a two-handed opening pocket knife. 

The sturdy SOLID handle is made of titanium or aluminum, with carbon fiber or micarta inserts. Both versions feature a Frame Lock type locking system and a removable and reversible pocket clip. 

Intended Use: Sporting / EDC

Production Type: Industrial
Country of Production: Italy
Blade: CPM MagnaCut 62/63HRC steel
Blade finish: Blackwashed OldBlack
Handle: billet aluminum with micarta insert
Blade length: 84mm.
Blade thickness: 4mm.
Total length: 200mm.
Weight: 72g.
Closure: Frame Lock with stainless steel casement
Clip: stainless steel, reversible and removable
Packaging: cardboard box with LionSteel logos
Notes: CNC machined Solid Frame Lock construction machined entirely from billet - Removable Carson Flipper opening system - IKBS ball bearing opening movement

Skinny, LionSteel's versatile new folding knife, features a SOLID billet construction and a CPM-MagnaCut steel blade.

It is opened incredibly smoothly via a flipper system supported by IKBS ball bearings, with the option to remove the flipper tab to comply with carry regulations found in some nations transforming the knife into a two-handed opening pocket knife. 

The sturdy SOLID handle is made of titanium or aluminum, with carbon fiber or micarta inserts. Both versions feature a Frame Lock type locking system and a removable and reversible pocket clip. 

Intended Use: Sporting / EDC

Production Type: Industrial
Country of Production: Italy
Blade: CPM MagnaCut 62/63HRC steel
Blade finish: Stonewashed
Handle: billet aluminum with micarta insert
Blade length: 84mm.
Blade thickness: 4mm.
Total length: 200mm.
Weight: 72g.
Closure: Frame Lock with stainless steel casement
Clip: stainless steel, reversible and removable
Packaging: cardboard box with LionSteel logos
Notes: CNC machined Solid Frame Lock construction machined entirely from billet - Removable Carson Flipper opening system - IKBS ball bearing opening movement

Skinny, LionSteel's versatile new folding knife, features a SOLID billet construction and a CPM-MagnaCut steel blade.

It is opened incredibly smoothly via a flipper system supported by IKBS ball bearings, with the option of removing the flipper tab to comply with carry regulations found in some nations transforming the knife into a two-handed opening pocket knife. 

The sturdy SOLID handle is made of titanium or aluminum, with carbon fiber or micarta inserts. Both versions feature a Frame Lock type locking system and a removable and reversible pocket clip. 

Intended Use: Sporting / EDC

Production Type: Industrial
Country of Production: Italy
Blade: CPM MagnaCut 62/63HRC steel
Blade finish: Stonewashed
Handle: billet aluminum with micarta insert
Blade length: 84mm.
Blade thickness: 4mm.
Total length: 200mm.
Weight: 72g.
Closure: Frame Lock with stainless steel casement
Clip: stainless steel, reversible and removable
Packaging: cardboard box with LionSteel logos
Notes: CNC machined Solid Frame Lock construction machined entirely from billet - Removable Carson Flipper opening system - IKBS ball bearing opening movement

Intended use: sporting/collection
Type of production: artisan
Blade production: Italy
Blade: Stainless steel X50CrMoV15
Blade treatment: -
Handle: Raw ox horn
Blade length: 70mm.
Blade thickness: 1,6mm.
Length closed: 90mm.
Total length: 160mm.
Weight: 53g.
Closure: without blade lock
Packaging: cardboard box
Sheath: -

Craftsmanship is beautiful because it is varied

The colours of the materials from which the handicrafts are made may vary from those shown in the pictures.

Horn, wood and cornotech are raw materials that by their nature have a marked variability from one supply to another: that's the beauty of fine materials. Add craftsmanship, where the craftsman's hand never makes the same gesture: that's the beauty of fine workmanship. Combine all this and you have a product that is always different and unique. And always different from that unique and unrepeatable product that, necessarily, we have to photograph if we want you to understand what we are talking about and what we are offering you.

NANO is the latest knife in the hi-tech family, an ideal partner for everyday activities.

The blade is made of CPM MagnaCut steel with satin finish equipped with the "ReF" (Removable Flipper system) applied on the new minimal lever, Double Crown ball bearing system and Solida titanium clip.

The titanium frame locking bar is reinforced with a hardened steel insert so that the titanium part will not be worn out by the rotation of the blade over time.
The clip, CNC-milled from a single piece of titanium, is reversible so it can be attached on the opposite side for left-handed users.

The removable Flipper system allows the user to decide whether the blade should have the trigger or not, which can be installed as needed or removed and replaced with the second "cap" screw.


Intended Use: Sporting

Type of production: Industrial
Country of manufacture: Italy
Blade: CPM MagnaCut 62/63HRC
Blade treatment: satin finish
Handle: Titanium 6Al4V and Canvas Micarta
Blade length: 65mm.
Blade thickness: 3.8mm.
Total length: 162mm.
Weight: 99g.
Closure: Frame Lock 
Clip: Titanium billet, removable and reversible
Packaging: Cardboard box with LionSteel logos
Notes: Carson Flipper opening system (removable) on ball bearings

NANO is the latest knife in the hi-tech family, an ideal partner for everyday activities.

The blade is made of CPM MagnaCut steel with satin finish equipped with the "ReF" (Removable Flipper system) applied on the new minimal lever, Double Crown ball bearing system and Solida titanium clip.

The titanium frame locking bar is reinforced with a hardened steel insert so that the titanium part will not be worn out by the rotation of the blade over time.
The clip, CNC-milled from a single piece of titanium, is reversible so it can be attached on the opposite side for left-handed users.

The removable Flipper system allows the user to decide whether the blade should have the trigger or not, which can be installed as needed or removed and replaced with the second "cap" screw.




Intended Use: Sporting

Type of production: Industrial
Country of manufacture: Italy
Blade: CPM MagnaCut 62/63HRC
Blade treatment: satin finish
Handle: Titanium 6Al4V and Canvas Micarta
Blade length: 65mm.
Blade thickness: 3.8mm.
Total length: 162mm.
Weight: 99g.
Closure: Frame Lock 
Clip: Titanium billet, removable and reversible
Packaging: Cardboard box with LionSteel logos
Notes: Carson Flipper opening system (removable) on ball bearings

lionSTEEL-Emerson ONE is the new SOLID® Karambit knife developed in collaboration with Emerson Design.

The Solid frame-lock handle, already a distinguishing feature of lionSTEEL, is machined from a solid piece of Ergal aluminum, while the blade is made of CPM MagnaCut steel.

Other built-in features make the knife more comfortable and safer to use, allowing the end user to choose how to use it:

* REF (REmovable Flipper system): this feature allows you to choose how to use the knife, if you don't want the flipper you can unscrew it and remove it using the torx tool and insert the second "cap" screw that fits perfectly into the hole at the bottom of the blade.

* Wave: Ernest Emerson's patented system that allows the blade to hook into the pocket of the pants, on extraction, allowing it to open automatically with the right motion.

Intended Use: Sporting/Tactical

Production Type: Industrial
Country of Production: Italy
Blade: CPM MagnaCut 62/63HRC steel
Blade Finish: Chemical Black
Handle: Aluminum, Solid, billet machined
Blade Length: 82mm.
Blade thickness: 4mm.
Total length: 210mm.
Weight: 134g.
Closure: Frame Lock with stainless steel casement
Clip: stainless steel, reversible and removable
Packaging: cardboard box with LionSteel logos
Notes: CNC machined Solid Frame Lock construction machined entirely from billet - Emerson Wave opening system - Removable Carson Flipper opening system - Ball bearing opening movement - Design by Ernst Emerson

lionSTEEL-Emerson ONE is the new SOLID® Karambit knife developed in collaboration with Emerson Design.

The Solid frame-lock handle, already a distinguishing feature of lionSTEEL, is machined from a solid piece of Ergal aluminum, while the blade is made of CPM MagnaCut steel.

Other built-in features make the knife more comfortable and safer to use, allowing the end user to choose how to use it:

* REF (REmovable Flipper system): this feature allows you to choose how to use the knife, if you don't want the flipper you can unscrew it and remove it using the torx tool and insert the second "cap" screw that fits perfectly into the hole at the bottom of the blade.

* Wave: Ernest Emerson's patented system that allows the blade to hook into the pocket of the pants, on extraction, allowing it to open automatically with the right motion.

Intended Use: Sporting/Tactical

Production Type: Industrial
Country of Production: Italy
Blade: CPM MagnaCut 62/63HRC steel
Blade Finish: Stonewashed
Handle: Aluminum, Solid, billet machined
Blade Length: 82mm.
Blade thickness: 4mm.
Total length: 210mm.
Weight: 134g.
Closure: Frame Lock with stainless steel casement
Clip: stainless steel, reversible and removable
Packaging: cardboard box with LionSteel logos
Notes: CNC machined Solid Frame Lock construction machined entirely from billet - Emerson Wave opening system - Removable Carson Flipper opening system - Ball bearing opening movement - Design by Ernst Emerson

Myto is the new hi-tech EDC folding knife that fits perfectly in your pocket and can be used for all daily activities. Its geometry and Molletta's elegant and minimal design marry perfectly with his strength:

has a M390 sintered steel blade with satin finish equipped with "" ReF "" (Removable Flipper system) and a Double Crown ball bearing system for a more stable blade and a smoother movement
has a SOLID® titanium clip screwed to the frame by a tungsten carbide glass breaker.
the locking bar is reinforced with a hardened steel insert to avoid wear due to blade rotation.

Intended use: Sports / Tactical

Type of production: Industrial
Country of production: Italy
Blade: Chad Nichols Stainless Damascus
Blade treatment:
Handle: titanium
Blade length: 83mm.
Blade thickness: 4mm.
Total length: 201mm.
Thick when closed: -mm.
Weight: 118g.
Closure: Frame Lock
Clip: titanium
Packaging: Elegant fully recyclable cardboard box
Notes: Carson Flipper opening system on ball bearings

Thrill Aluminum is the SlipJoint knife with clip that can be inserted inside the handle in case of need thanks to the lionSTEEL HWAY.L - Hide What Annoys You system.

Designed by Molletta, it is equipped with a “no locks” mechanism and has a SOLID® Knife handle, made from a single block of aluminum. The handle, light and easy to grip, is available in black, red, green and orange.

The blade is in Scrambled damask (Chad Nichols).

Intended use: EDC / Sports

Type of production: Industrial
Country of production: Italy
Blade: Chad Nichols Stainless Damascus
Blade treatment: Satin
Handle: Titanium machined from solid
Blade length: 80mm.
Blade thickness: 3.5mm.
Total length: 180mm.
Thick when closed: 18mm.
Weight: 88g.
Closure: SlipJoint with steel flap
Clip: retractable, machined from solid
Packaging: cardboard box with LionSteel logos
Note: -

Myto is the new hi-tech EDC folding knife that fits perfectly in your pocket and can be used for all daily activities. Its geometry and Molletta's elegant and minimal design marry perfectly with its strength:

has a M390 sintered steel blade with satin finish equipped with "" ReF "" (Removable Flipper system) and a Double Crown ball bearing system for a more stable blade and a smoother movement
has a SOLID® titanium clip screwed to the frame by a tungsten carbide glass breaker.
the locking bar is reinforced with a hardened steel insert to avoid wear due to blade rotation.
Myto is supplied in a fully recyclable cardboard box. Inside, you will also find:

the "lionSTEEL Handy" (tool for Hex and Torx screws) and the "cap screw" to be used when the flipper is removed
the warranty and maintenance card.
Intended use: Sports / Tactical

Type of production: Industrial
Country of production: Italy
Blade: M390 59 / 60HRC stainless steel
Blade treatment: Satin
Handle: titanium and micarta
Blade length: 83mm.
Blade thickness: 4mm.
Total length: 201mm.
Thick when closed: -mm.
Weight: 96g.
Closure: Frame Lock
Clip: titanium
Packaging: Elegant cardboard box entirely recyclable
Notes: Carson Flipper opening system on ball bearings

Myto is the new hi-tech EDC folding knife that fits perfectly in your pocket and can be used for all daily activities. Its geometry and Molletta's elegant and minimal design marry perfectly with its strength:

has a M390 sintered steel blade with satin finish equipped with "" ReF "" (Removable Flipper system) and a Double Crown ball bearing system for a more stable blade and a smoother movement
has a SOLID® titanium clip screwed to the frame by a tungsten carbide glass breaker.
the locking bar is reinforced with a hardened steel insert to avoid wear due to blade rotation.
Myto is supplied in a fully recyclable cardboard box. Inside, you will also find:

the "lionSTEEL Handy" (tool for Hex and Torx screws) and the "cap screw" to be used when the flipper is removed
the warranty and maintenance card.
Intended use: Sports / Tactical

Type of production: Industrial
Country of production: Italy
Blade: M390 59 / 60HRC stainless steel
Blade treatment: Satin
Handle: titanium and micarta
Blade length: 83mm.
Blade thickness: 4mm.
Total length: 201mm.
Thick when closed: -mm.
Weight: 96g.
Closure: Frame Lock
Clip: titanium
Packaging: Elegant cardboard box entirely recyclable
Notes: Carson Flipper opening system on ball bearings

Intended use: EDC / Sports

Type of production: Industrial
Country of production: Italy
Blade: Stainless steel M390 59 / 60HRC
Blade treatment: Satin finish
Handle: billet aluminum
Blade length: 80mm.
Blade thickness: 3.5mm.
Total length: 180mm.
Thick when closed: 18mm.
Weight: 62g.
Closure: SlipJoint with steel leaf
Clip: retractable, made from solid
Packaging: cardboard box with LionSteel logos
Note: -

"My idea behind the Gitano was to make a folding knife that is based on old south european folding knives in a new style. What I like about these knives is its elegant lines and often large blades in relation to the handles". Gudy van Poppel
 
LionSteel loved Gudy 's idea and decided to start this new collaboration with him and Tools For Gents that helped us to devolope the final versions. Gitano is an E.D.C. (Every Day Carry) folding knife that joined the "Tradition by LionSteel" collection.
 
Gitano comes with a Niolox stailess steel satin blade. It is available with 6AI4V titanium bolsters and liners, while the scales can be made of olive wood, santos wood, green canvas, black G10 or carbon fiber.
 
For its light weight and average dimensions, Gitano is the new elegant slip-point knife to carry with you in every situation.

Intended use: Gentleman / EDC

Type of production: Industrial
Country of production: Italy
Blade: Stainless steel Niolox 59 / 60HRC
Blade treatment: Satin finish
Handle: Titanium 6Al4V and micarta
Blade length: 80mm.
Blade thickness: 2.5mm.
Closed length: 105mm.
Total length: 190mm.
Thick when closed: 12mm.
Weight: 76g.
Closure: SlipJoint
Clip: -
Sheath: -
Packaging: cardboard box with LionSteel logos
Note: -

bestMAN is an E.D.C (Every Day Carry) folding knife born to be the best companion for daily activities. lionSTEEL takes a leap backwards towards the classics, creating a modern version of this knife with innovative technologies and high quality materials.

bestMAN is characterized by a M390 sintered steel clip blade, 6AI4V titanium escutcheons and natural micarta grips. For its lightness and small size, bestMAN is the new slipjoint knife ideal to take with you on any occasion.

Intended use: Gentleman / EDC

Type of production: Industrial
Country of production: Italy
Blade: Stainless steel M390 59 / 60HRC
Blade treatment: Satin finish
Handle: Titanium 6Al4V and micarta
Blade length: 71mm.
Blade thickness: 2.5mm.
Closed Length: 96.5mm.
Total length: 170mm.
Thick when closed: 11.7mm.
Weight: 68g.
Closure: SlipJoint
Clip: -
Sheath: -
Packaging: cardboard box with LionSteel logos
Note: -

ROK, which is part of the SOLID knives family made from a single piece of aluminum or titanium, has two important innovations:

* the introduction of the new H.WAYL System; it is a LionSteel patent that allows the clip to disappear inside the handle when using the knife. The clip can appear only when needed.

* the introduction of NFC technology into the knife box. With this system the user no longer has to look for the information on the product, but it is the knife itself that makes them available: indications for maintenance, in-depth information on the production process, or more general information about LionSteel.

As was already the case with the TRE model, the user has the possibility to remove the pinball machine, opting for a more traditional two-handed blade opening. Also on the ROK there is the Rotoblock safety system and a steel tip on the end of the blade locking bar: in this way it is possible to prevent breakage or wear caused by the blade itself.

Intended use: Sports / Tactical

Type of production: Industrial
Country of production: Italy
Blade: Stainless steel M390 59 / 60HRC
Blade treatment: Satin
Handle: Titanium
Blade length: 86mm.
Blade thickness: 4.5mm.
Total length: 198mm.
Thickness when closed: -mm.
Weight: 156g.
Closing: Frame Lock with steel swing and Rotoblock safety system
Clip: concealed, made from solid
Packaging: cardboard box with LionSteel logos
Notes: Carson Flipper opening system on ball bearings - possibility to remove the pinball system guard

ROK, which is part of the SOLID knives family made from a single piece of aluminum or titanium, has two important innovations:

* the introduction of the new H.WAYL System; it is a LionSteel patent that allows the clip to disappear inside the handle when using the knife. The clip can appear only when needed.

* the introduction of NFC technology into the knife box. With this system the user no longer has to look for the information on the product, but it is the knife itself that makes them available: indications for maintenance, in-depth information on the production process, or more general information about LionSteel.

As was already the case with the TRE model, the user has the possibility to remove the pinball machine, opting for a more traditional two-handed blade opening. Also on the ROK there is the Rotoblock safety system and a steel tip on the end of the blade locking bar: in this way it is possible to prevent breakage or wear caused by the blade itself.

Intended use: Sports / Tactical

Type of production: Industrial
Country of production: Italy
Blade: Stainless steel M390 59 / 60HRC
Blade treatment: Black PVD
Handle: Aluminum
Blade length: 86mm.
Blade thickness: 4.5mm.
Total length: 198mm.
Thickness when closed: -mm.
Weight: 130g.
Closing: Frame Lock with steel swing and Rotoblock safety system
Clip: concealed, made from solid
Packaging: cardboard box with LionSteel logos
Notes: Carson Flipper opening system on ball bearings - possibility to remove the pinball system guard

Intended use: Sports / Tactical

Type of production: Industrial
Country of production: Italy
Blade: Sleipner 60 / 61HRC steel
Blade treatment: Satin
Handle: Single-piece titanium machined from solid and machined with numerical control
Blade length: 80mm.
Blade thickness: 3.5mm.
Total length: 180mm.
Thick when closed: 8.5mm.
Weight: 149g.
Closing: Frame Lock with steel swing and Rotoblock safety system
Clip: removable and reversible, in stainless steel
Packaging: cardboard box with LionSteel logos
Notes: Carson Flipper opening system on ball bearings

Intended use: Sports / Tactical

Type of production: Industrial
Country of production: Italy
Blade: Sleipner 60 / 61HRC steel
Blade treatment: Satin
Handle: Single-piece titanium machined from solid and machined with numerical control
Blade length: 80mm.
Blade thickness: 3.5mm.
Total length: 180mm.
Thick when closed: 8.5mm.
Weight: 149g.
Closing: Frame Lock with steel swing and Rotoblock safety system
Clip: removable and reversible, in stainless steel
Packaging: cardboard box with LionSteel logos
Notes: Carson Flipper opening system on ball bearings

This model represents an evolution of the traditional zuava in steel, with brass finishes, hard pressed on the plates rather than welded and pin finished on a par with rather than visible as was the case in the old construction.

Regional artisan knife produced in Scarperia, in use throughout Tuscany until the early nineteenth century.
Very robust and suitable for all jobs

Handle: ox horn
Blade: 440A Steel
Total length: 16 cm
Blade length: 7.5 cm

The series Kilama by Consigli is a modern interpretation of Italian regional knives.
The materials and finishes remain the same as always but the line has the form "new"

Total length: 185
Blade length: 80
Blade thickness: 2.5
Weight. 55g
Steel: 420
Hanfle: amaranth wood
Sheath: -
Package: box with cleaning kit

* Opening on ball bearings with system IKBS
* Thumbstud and Flipper
* Spacer titanium
* Clip Titanium
* Frame Titanium

Intended Use: Sport / Collection

Type of production: Industrial
Production Lama: Italy
Blade: Stainless Bohler M390 60 / 61HRC
Treatment Lama: Satin
Handle: Titanium and G10 Black
Blade length: 74mm.
Blade thickness: 3.5mm.
Overall length: 175mm.
Weight: 65g.
Closure: Frame Lock Titanium with steel swing
Clip: Titanium 6Al4V
Packaging: -
Notes: design by Peg - opening on ball bearings IKBS

* Opening on ball bearings with system IKBS
* Thumbstud and removable Flipper
* Spacer titanium
* Clip Titanium
* Frame Titanium
* Box wood with all accessories (Torx T6, T8, Thumb Stud, Flipper, Two screws addizioniali)

Intended Use: Sport / collection

type of production: Industrial
production Lama: Italy
Blade: Stainless Bohler M390 60 / 61HRC
treatment Lama: Satin
handle: Carbon Fiber
blade length: 74mm.
blade thickness: 3.5mm.
total length: 175mm.
Weight: 62g.
Closing: Frame Lock Titanium with steel swing
Clip: Titanium 6Al4V
Package: Box wood with accessories
Notes: design by Molletta - opening on ball bearings IKBS

Scimitar "or" French "blade already present in the early twentieth century, production continued until the mid-1950s. The great success of this model, which was born in Scarperia has had national diffusion, is due to the fact that although it is very light it is elegant, robust and has great cutting capacity, due to the guessed shape of the blade. It is characterized by the presence of a metal "button" on the heel and a clamp at the other end of the handle.

Intended use: sports / collection
Type of production: artisan
Lama production: Italy
Blade: X50CrMoV15 stainless steel
Blade treatment: -
Handle: Ox horn and nickel silver
Blade length: 100mm.
Blade thickness: 3mm.
Length closed: 135mm.
Total length: 243mm.
Weight: 148g.
Closing: without blade lock
Packaging: elegant box with Recommendations logos
Sheath: fabric case

Craftsmanship is beautiful because it is varied

The colors of the materials with which the handmade products are made may vary from those shown in the images.
Horn, wood and cornotech are raw materials that by their nature have a marked variability from one supply to another: it is the beauty of quality materials. Add craftsmanship, where the craftsman's hand never makes the same gesture: it's the beauty of craftsmanship. Combine all this and you will always have a different and unique product. It is always different from the one and unrepeatable product that we must necessarily photograph if we want you to understand what we are talking about and what we are offering you.

A native of Calabria, this knife by the blade and pointed straight but has a handle in the most typical style of Scarborough, has a seal consists of two rings round, similar to Fiorentino, although smaller. It is supposed to have been in the past a major reworking of the knives typical Calabrian by the craftsmen of Scarperia that as often happened then have been extensively used to their own tradition. Model in horn tip.

Stainless steel blade 440.
Blade length 8 cm.
Blade thickness 3 mm.
Overall length 20 cm.
Weight 62 gr.
Handle in horn tip

Typical Sardinian handmade folding knife produced by the Conaz company from Scarperia

Type of production: artisan
Lama production: Italy
Blade: X50CrMoV15 stainless steel
Blade treatment: -
Handle: Raw ram horn
Blade length: 70mm.
Blade thickness: 3mm.
Length closed: 95mm.
Total length: 170mm.
Weight: 34g.
Closing: without blade lock
Packaging: elegant box with Recommendations logos
Sheath: fabric case

Craftsmanship is beautiful because it is varied

The colors of the materials with which the handmade products are made may vary from those shown in the images.

Horn, wood and cornotech are raw materials that by their nature have a marked variability from one supply to another: it is the beauty of quality materials. Add craftsmanship, where the craftsman's hand never makes the same gesture: it's the beauty of craftsmanship. Combine all this and you will always have a different and unique product. It is always different from the one and unrepeatable product that we must necessarily photograph if we want you to understand what we are talking about and what we are offering you

Pattada Brotzu raw mutton 22cm PBM22G - knife
Typical folding knife craftsmanship Sardinian manufactured by Conaz Scarperia

Blade: stainless steel 420
Handle: raw mutton
Blade length: 90mm.
Overall length: 215mm.
Weight: 64g.

WARNING: these are natural material, the color of the horn may be different from the one in the picture.

The Kilama series of Consigli is a modern interpretation of Italian regional knives. The materials and finishes remain the same as always, but the line has "new" shapes that reflect the classic traditional and regional Italian knives.

Intended use: sports / collection
Type of production: artisan
Lama production: Italy
Blade: X50CrMoV15 stainless steel
Blade treatment: -
Handle: Ox horn
Blade length: 80mm.
Blade thickness: 2.5mm.
Length closed: 105mm.
Total length: 185mm.
Weight: 63g.
Closing: without blade lock
Packaging: elegant box with Recommendations logos
Sheath: fabric case

Maremma in Olivo - Series Kilama MFO18 - knife

The series Kilama Councils is a modern interpretation of Italian regional knives.
The materials and finishes remain the same as always but the line has the form "new"
that reflect the traditional and regional Italian classics knives.

Total length: 185
Blade length: 80
blade thickness: 2.5
weight. 55g
Steel: 420
manicatura: amaranth wood
Sheath: fabric
Package: Box Advice with cleaning kit knife

The Kilama series of Consigli is a modern interpretation of Italian regional knives. The materials and finishes remain the same as always, but the line has "new" shapes that reflect the classic traditional and regional Italian knives.
Type of production: artisan

Lama production: Italy
Blade: X50CrMoV15 stainless steel
Blade treatment: -
Handle: olive wood
Blade length: 80mm.
Blade thickness: 2.5mm.
Length closed: 95mm.
Total length: 185mm.
Weight: 50g.
Closing: retention spring
Packaging: Tips box with knife cleaning kit
Sheath: fabric case

The Kilama series of Consigli is a modern interpretation of Italian regional knives. The materials and finishes remain the same as always, but the line has "new" shapes that reflect the classic traditional and regional Italian knives.

Type of production: artisan
Lama production: Italy
Blade: X50CrMoV15 stainless steel
Blade treatment: -
Handle: amaranth wood
Blade length: 80mm.
Blade thickness: 3mm.
Length closed: 90mm.
Total length: 185mm.
Weight: 55g.
Closing: without blade lock
Packaging: elegant box with Recommendations logos
Sheath: fabric case

Craftsmanship is beautiful because it is varied

The colors of the materials with which the handmade products are made may vary from those shown in the images.

Horn, wood and cornotech are raw materials that by their nature have a marked variability from one supply to another: it is the beauty of quality materials. Add craftsmanship, where the craftsman's hand never makes the same gesture: it's the beauty of craftsmanship. Combine all this and you will always have a different and unique product. It is always different from the one and unrepeatable product that we must necessarily photograph if we want you to understand what we are talking about and what we are offering you.

Made according to the ancient art of knives, the Piedmontese knife, typical of the Piedmont Region, retains its original sober line.
Solid and functional, the blade is in stainless steel and the handle is a monobloc made of bovine horn.

Type of production: artisan
Lama production: Italy
Blade: X50CrMoV15 stainless steel
Blade treatment: -
Handle: ox horn
Blade length: 80mm.
Blade thickness: 2.5mm.
Length closed: 90mm.
Total length: 180mm.
Weight: 50g.
Closing: without blade lock
Packaging: elegant box with Recommendations logos
Sheath: fabric case

Craftsmanship is beautiful because it is varied

The colors of the materials with which the handmade products are made may vary from those shown in the images.

Horn, wood and cornotech are raw materials that by their nature have a marked variability from one supply to another: it is the beauty of quality materials. Add craftsmanship, where the craftsman's hand never makes the same gesture: it's the beauty of craftsmanship. Combine all this and you will always have a different and unique product. It is always different from the one and unrepeatable product that we must necessarily photograph if we want you to understand what we are talking about and what we are offering you.

Intended use: sports / collection
Type of production: artisan
Lama production: Italy
Blade: X50CrMoV15 stainless steel
Blade treatment: -
Handle: Raw ox horn
Blade length: 75mm.
Blade thickness: 2.5mm.
Length closed: 110mm.
Total length: 190mm.
Weight: 79g.
Closing: without blade lock
Packaging: cardboard box
Sheath: -

Craftsmanship is beautiful because it is varied

The colors of the materials with which the handmade products are made may vary from those shown in the images.

Horn, wood and cornotech are raw materials that by their nature have a marked variability from one supply to another: it is the beauty of quality materials. Add craftsmanship, where the craftsman's hand never makes the same gesture: it's the beauty of craftsmanship. Combine all this and you will always have a different and unique product. It is always different from the one and unrepeatable product that we must necessarily photograph if we want you to understand what we are talking about and what we are offering you.

Mugello 16 cm horn cattle raw E-CMC16G - knife

Blade: 420 stainless steel
Handle: raw beef
Blade length: 75mm.
Overall length: 165mm.
Weight: 39g.
Closed Length: 90mm.

CAUTION: Since this is a natural material, the color of the horn may be different from the one in the picture.

Ghiandina 16 cm horn cattle raw E-GHC16G - knife

Blade: 420 stainless steel
Handle: raw beef
Blade length: 70mm.
Overall length: 160mm.
Weight: 36g.
Closed Length: 90mm.

CAUTION: Since this is a natural material, the color of the horn may be different from the one in the picture.

Traditional knife produced by master cutlers in Scarperia, a place where, since 1300, the artisan manufacture of Italian knives has continued.
Fisherman's knife, typical of the Adriatic sea belt. With external spring, handle in full polished bovine horn, on the end of the back it has a deep step at right angle useful for branching nets.
Intended use: Collection

Type of production: artisanal
Blade: X50CrMoV15 stainless steel
Production Lama: Italy
Handle: Ox horn
Blade length: 85mm.
Blade thickness: 2.5mm.
Total length: 200mm.
Weight: 58g.
Closing:
Notes: handcrafted in the city of Scarperia (FI)

The colors of the materials with which our handmade products are made may vary from those shown in the images.

Horn, wood and cornotech are raw materials that by their nature have a marked variability from one supply to another: this is the beauty of quality materials. Add the craftsmanship, where the hand of the craftsman never performs the same gesture: it is the beauty of craftsmanship. Combine all this and you will have a product that is always different and unique. It is always different from that unique and unrepeatable product that we must necessarily photograph if we want to make you understand what we are talking about and what we are offering you. A slight surprise is therefore always accompanied by every online purchase of our handcrafted products: but this is also the beauty of craftsmanship.

Characteristic Sardinian knife, typical of the Arbus area, blade with a characteristic bellied shape, very suitable for leather.

Intended use: sports / collection
Type of production: artisan
Lama production: Italy
Blade: X50CrMoV15 stainless steel
Blade treatment: -
Handle: Ox horn and nickel silver with handcrafted engravings
Blade length: 85mm.
Blade thickness: 2.5mm.
Length closed: 15mm.
Total length: 205mm.
Weight: 73g.
Closing: without blade lock
Packaging: cardboard box
Sheath: fabric case
Craftsmanship is beautiful because it is varied

The colors of the materials with which the handmade products are made may vary from those shown in the images.

Horn, wood and cornotech are raw materials that by their nature have a marked variability from one supply to another: it is the beauty of quality materials. Add craftsmanship, where the craftsman's hand never makes the same gesture: it's the beauty of craftsmanship. Combine all this and you will always have a different and unique product. It is always different from the one and unrepeatable product that we must necessarily photograph if we want you to understand what we are talking about and what we are offering you.

Characteristic Sardinian knife, typical of the Arbus area; with blade with a characteristic bellied shape, very suitable for leather. Traditional shapes and fine finishes.

The shape reached today derives from ancient styles used in past times.

Lama production: Italy
Blade: X50CrMoV15 stainless steel
Blade treatment: -
Handle: ox wood
Blade length: 85mm.
Blade thickness: 2mm.
Length closed: 115mm.
Total length: 205mm.
Weight: 50g.
Closing: without lock
Packaging: cardboard box
Sheath: fabric case

Craftsmanship is beautiful because it is varied

The colors of the materials with which the handmade products are made may vary from those shown in the images.

Horn, wood and cornotech are raw materials that by their nature have a marked variability from one supply to another: it is the beauty of quality materials. Add craftsmanship, where the craftsman's hand never makes the same gesture: it's the beauty of craftsmanship. Combine all this and you will always have a different and unique product. It is always different from the one and unrepeatable product that we must necessarily photograph if we want you to understand what we are talking about and what we are offering you.

Knife without spring with a very characteristic line, representative of the peasant and pastoral civilization of the Bergamo valleys where it was made with a wooden handle. Practical and light, in its simplicity it is one of the most beautiful knives of the Italian tradition and has long been appreciated well outside its original area. It is proposed by Consiglio in a refined version, a horn tip model with a polished brass band.

Type of production: artisan

Lama production: Italy
Blade: X50CrMoV15 stainless steel
Blade treatment: -
Handle: bovine horn
Blade length: 90mm.
Blade thickness: 2.5mm.
Length closed: 110mm.
Total length: 200mm.
Weight: 70g.
Closing: without spring
Packaging: elegant box with Recommendations logos
Sheath: fabric case

Craftsmanship is beautiful because it is varied

The colors of the materials with which the handmade products are made may vary from those shown in the images.

Horn, wood and cornotech are raw materials that by their nature have a marked variability from one supply to another: it is the beauty of quality materials. Add craftsmanship, where the craftsman's hand never makes the same gesture: it's the beauty of craftsmanship. Combine all this and you will always have a different and unique product. It is always different from the one and unrepeatable product that we must necessarily photograph if we want you to understand what we are talking about and what we are offering you.

This knife owes its name to the blunt tip which is absolutely missing as if the blade had been cut off.
Pointless knives became much more widespread with the "Giolitti law" of 1908 which fixed the length of the blade of pointed knives at only four centimeters.
For mozzette, the limit rose to ten centimeters, offering the possibility of safely carrying a knife of sufficient size in your pocket without risking the rigors of the law.

Intended use: sports / collection
Type of production: artisanal
Production Lama: Italy
Blade: X50CrMoV15 stainless steel
Blade treatment: -
Handle: Ox horn
Blade length: 80mm.
Blade thickness: 3mm.
Closed length: 105mm.
Total length: 185mm.
Weight: 63g.
Closure: without blade lock
Packaging: elegant box with Recommendations logos
Sheath: fabric case

The craftsmanship is beautiful because it is varied

The colors of the materials with which the handicrafts are made may vary from those shown in the images.
Horn, wood and cornotech are raw materials that by their nature have a marked variability from one supply to another: this is the beauty of quality materials. Add the craftsmanship, where the hand of the craftsman never performs the same gesture: it is the beauty of craftsmanship. Combine all this and you will have a product that is always different and unique. It is always different from that unique and unrepeatable product that we must necessarily photograph if we want to make you understand what we are talking about and what we are offering you.

This Pattada constitutes the now historical interpretation of the Sardinian knife made by the Scarperia Consigli company.
The handle formed by two halves fixed with a row of rivets and the absence of a real spring are typical of the original model, but the line, the shape of the surfaces, the use of bovine horn are influenced by the Scarperian tradition.
Consigli has long linked its business to supplies for Sardinia, so much so that their Pattada have now become "Sardinian by adoption".

Intended use: sports / collection
Type of production: artisan
Lama production: Italy
Blade: X50CrMoV15 stainless steel
Blade treatment: -
Handle: Ox horn and nickel silver with handcrafted engravings
Blade length: 90mm.
Blade thickness: 2.5mm.
Length closed: 120mm.
Total length: 215mm.
Weight: 62g.
Closing: without blade lock
Packaging: cardboard box
Sheath: fabric case

Craftsmanship is beautiful because it is varied

The colors of the materials with which the handmade products are made may vary from those shown in the images.

Horn, wood and cornotech are raw materials that by their nature have a marked variability from one supply to another: it is the beauty of quality materials. Add craftsmanship, where the craftsman's hand never makes the same gesture: it's the beauty of craftsmanship. Combine all this and you will always have a different and unique product. It is always different from the one and unrepeatable product that we must necessarily photograph if we want you to understand what we are talking about and what we are offering you.

This Pattada constitutes the now historical interpretation of the Sardinian knife made by Consiglio. The handle formed by two halves fixed with a row of rivets and the absence of a real spring are typical of the original model, but the line, the shape of the surfaces, the use of bovine horn are influenced by the Scarperian tradition. Consigli has long linked its business to supplies for Sardinia, so much so that their Pattada have now become "Sardinian by adoption".

Lama production: Italy
Blade: X50CrMoV15 stainless steel
Blade treatment: -
Handle: ox horn
Blade length: 70mm.
Blade thickness: 3mm.
Length closed: 135mm.
Total length: 243mm.
Weight: 76g.
Closing: without lock
Packaging: cardboard box
Sheath: fabric case

Craftsmanship is beautiful because it is varied

The colors of the materials with which the handmade products are made may vary from those shown in the images.

Horn, wood and cornotech are raw materials that by their nature have a marked variability from one supply to another: it is the beauty of quality materials. Add craftsmanship, where the craftsman's hand never makes the same gesture: it's the beauty of craftsmanship. Combine all this and you will always have a different and unique product. It is always different from the one and unrepeatable product that we must necessarily photograph if we want you to understand what we are talking about and what we are offering you

The "Roman" testifies to the widespread mentality in the Papal States for which the knife was considered as a faithful friend to be constantly worn "in his pocket" and to be unleashed at the first hint of a fight or for an immediate response.

Many elements constituting the "Roman" bear witness to the offensive use that distinguished this knife: the sharp blade, the decorations of the lattice handle or fish bone that served to improve the grip, the locking system with fixed spring that prevented the knife could close up accidentally and that at the time of the opening emitted a dry noise that exalted the aggressive expression.

Destination of use: collection

Type of production: artisan
Blade: 420 stainless steel
Country of production: Italy
Grip: engraved ox horn
Blade length: 130mm.
Blade thickness: 2.5mm.
Length closed: 160mm.
Total length: 290mm.
Weight: 106g.
Closure: rear ring lock
Notes: made entirely by hand in the city of Scarperia (FI)

Weight: 140g.

Three Pianelle R-TPC20 - knife

Craft knife regional product in Scarborough in use in southern Italy
The handle in a single block of polished cow horn, carries on pin the characteristic round escutcheon in brass.

Blade: Stainless ino 440
Blade length: 8.5 cm
Overall length 20 cm
Weight: 38 gr.
Handle: horn cattle

KNIFE RETIRED FROM PRIVATE COLLECTION
* Type: Previously purchased
* Condition: In like new condition
* Commercially available: No
* Sharpening: original
* Marks on blade: No
* Marks on handle: No
* Box: present but not perfect
* Manuals, Certificates and Guarantees: Yes
* Checked and Certified by our internal laboratory

Intended use: Sports/Tactical

Type of production: Industrial
Blade production: Italy
Blade: D2 steel
Blade Treatment: -
Handle: G-10
Blade length: 82mm.
Blade thickness: 3mm.
Closed length: 108mm.
Total length: 190mm.
Closed thickness: 16mm.
Balancing: -
Weight: 108g.
Locking: TOL - Tactical Operation Lock
Clips: -
Sheath: -
Packaging: cardboard box with Lion Steel logos
Notes: Design by Max