Knives, collection knife, tactical knives, outdoor knives, pocket knives and tools
-
ExtremaRatio - Silver Talon - Fiorentina Steak Knife - Steak and Table Knife
TACTICAL CUTLERY ENTERS THE KITCHEN!
Silver Talon is the knife designed by Extrema Ratio to celebrate the famous "Fiorentina" steak. This knife made of machined steel from solid, thanks to its integral structure, does not allow deposits of organic material.The special claw shape of the blade allows it to cut dishes without the blade ever touching the plate with the edge but rather with the tip. Silver Talon, when used correctly, will retain its original sharpness for a very long time. For those who love precision tools even on the table.
Intended use: steak knife/table knifeType of production: Industrial
Country of manufacture: Italy
Blade: stainless steel N690Co hardened to 58HRC
Blade Finish: Satin
Handle: /
Blade Length: 86mm.
Blade thickness: 2.5mm. on the blade / 6.5mm on the handle
Total length: 193m.
Weight: 85g.
Sheath: -
Packaging: Cardboard box with Extrema Ratio logos.
Notes: -ER-ST -
ExtremaRatio - Satre - N690 Stone Washed - Neck Knife
Satre is a fixed blade knife of small dimensions, light and extremely resistant. Given its characteristics, it can be used in a wide range of disciplines and uses ranging from survival activities, bushcraft or as an element of an EDC (Every Day Carry) kit.
It has been designed in collaboration with Daniele Dal Canto, Master Advanced F.I.S.S. (Federazione italiana survival sportivo e sperimentale) instructor.
In Neck Knife mode, through the use of a 550 paracord lanyard, it is possible to hold it around the neck keeping the knife vertical with the handle facing downwards. The metal eyelets on the sheath, made of pre-shaped Kydex, allow the application of both the lanyard and the accessory holder.
The full-tang skeleton structure, allows to personalize the knife using the Paracord as a coating for the handle.
The Stone Washed version uses Böhler N690 heat treated to 58 HRC. This material is chosen for its ability to resist oxidation, the durability of the edge and above all the reliability it has shown over the years.
Intended Use: Neck Knife / Hiking / UtilityType of production: industrial
Country of production: Italy
Blade: Stainless steel N690Co 58/60HRC
Blade Treatment: Stone Washed
Handle: Stainless steel N690Co 58/60HRC
Blade length: 70mm.
Blade thickness: 5mm.
Total lenght: 163mm.
Weight: 78g.
Scabbard: Kydex, for neck.
Packaging: Cardboard box with Extrema Ratio logos.
Notes: possibility to use the scabbard with Ulti-Clip, M.O.L.L.E. or Tek-Lok systems (available separately).ER-SAT-SW -
ExtremaRatio - DMP - Wolf Gray StoneWashed - Knife
DMP is a multi-role knife characterized by a strong versatility of use thanks to the small dimensions. The blade, drop point shape with reinforced tip, is particularly useful for heavy duty use. The full flat rounding gives excellent cutting characteristics.
The sheath is minimalist, stripped of most of the fabric adopting a retention system of 2nd level, going to recall the style of the model to which it is inspired. The main shell is made by injection in shockproof nylon. The secondary retention system is reversible for the ambidextrous portability of the knife.
Intended Use: Tactical / Multi-role
Production type: Industrial
Country of Production: Italy
Blade: Stainless steel N690Co 58HRC
Blade Treatment: Stone Washed
Handle: Forprene
Blade length: 152mm.
Blade thickness: 6.3mm.
Total length: 282mm.
Weight: 283g.
Scabbard: Nylon
Packaging: Cardboard box with Extrema Ratio logos.
Notes: -ER-DMP-WG -
ExtremaRatio - Contact Wolf Gray Knife Stone Washed - tactical knife
Intended use: Tactical / Multirole
Type of production: Industrial
Country of production: Italy
Blade: stainless steel N690Co 58HRC
Blade treatment: Stone Washed
Handle: Forprene
Blade length: 162mm.
Blade thickness: 6.3mm.
Total length: 293mm.
Weight: 300g.
Sheath: in Nylon
Packaging: Cardboard box with Extrema Ratio logos
Note: -Extrema Ratio developed the first knife of a new production line, called CONTACT.
It has a blade with a lance-shaped profile, a flat grinding and a diamond-shaped geometry. It has got a lower guard branch to protect itself from incidental cuts, upper jumping to improve grip, concave fuller along the length of the blade and a generous thickness blade (6.30mm) the now famous Requiem, revisited in proportions and in some technical features. The first of a new line of multipurpose knives.
The blade is made in Böhler N690 steel with a hardness of 58 HRC and a chemical burnishing coating for the Black version. All other colors in production have got a blade with Stone Washed finishing. The handle is still in forprene. It is more assembled by the side screws but thanks to the shank in truncated cone-shaped stainless steel that is screwed to the bottom and goes to fit inside a special seat, which makes it solid. In this way the knife is well balanced. The sheath is minimalist; most of the fabric has been cut off; it has got a 2nd level retention system, remembering the style of the model it was inspired by.
The main shell is injection-molded in shockproof nylon. The secondary retention system is reversible for ambidextrous users. The blade is guided through the conception of the blade. To extract the blade, to pressure the trigger will be sufficient, thus releasing the safety that holds securely in the sheath. In the horizontal slits of the sheath of a system, which fixes the blade to avoid shaking noises when it is stored inside. The back side of the nylon sheath is M.O.L.L.E. compatible.
The textile part is reduced to its minimum and has got the classic two-button safety strap with a belt loop Extrema Ratio aims to reduce the size of the knife, but not saving on the structural strength and safety accessories.
so be used as glass breakers
ER-CON-WG -
ExtremaRatio - Requiem Wolf Gray - tactical knife
Multi-purpose tactical knife with a light weight and very well-grip. The stiletto type blade is sharpened only on one side and has a guard. The Requiem is equipped with the innovative nylon liner Aspis expressly studied by Extrema Ratio to allow the quick release of the blade and the fixing inside the passages of the M.O.L.L.E system, thanks to two multiposition clips.
Intended use: Tactical / Multirole
Type of production: Industrial
Country of production: Italy
Blade: stainless steel N690Co hardened to 58HRC
Blade treatment: Satin
Handle: Forprene
Blade length: 118mm.
Blade thickness: 4mm.
Total length: 238mm.
Weight: 86g.
Sheath: Nylon with two multiposition clips, designed for M.O.L.L.E.
Packaging: cardboard box with Extrema Ratio logos
Note: -ER-REQ-WG -
ExtremaRatio - Mamba Wolf Gray - tactical knife
A compact and compact multi-role knife with ABS fast release sheath with two multiposition clips and tight enough to be secured inside the passers-through of the M.O.L.L.E. - Available in four color variants: Black, Desert, Ranger Green and HCS (Hybrid Coyote Sage)
Intended use: tactical / multi role
Type of production: industrial
Country of production: Italy
Blade: N690Co stainless steel hardened to 58HRC
Blade Treatment: Satin
Handle: Forprene
Blade Length: 116mm.
Blade thickness: 4mm.
Total Length: 237mm.
Weight: 85g.
Sheath: in ABS with two multiposition clips, designed for type M.O.L.L.E.
Packing: Cardboard box with Extrema Ratio logos
Notes: -ER-MAM-WG -
ExtremaRatio - N.K.3 Karambit Stone Washed - Neck Knife - NK3K - knife
NK3 is a small knife that extends the family of the neck knives Extrema Ratio.
It differs from the models NK1 and NK2 for the largest size of the blade-type "long" 70mm. The ergonomic grip is designed so as to prevent accidental cuts during withdrawal from the scabbard.
On the back it is formed a drain for the positioning of the thumb or index depending on use. The structure enables both use for work or cutting very effective for small precision work.
The Kydex sheath is a quick release and is supplied to the port of paracord knife in his neck.
intended use: Neck Knife
type of production: Industrial
production country: Italy
Blade: stainless steel N690Co 58 / 60HRC
Blade treatment: Stone Washed
manicatura: stainless steel N690Co 58 / 60HRC
blade length: 70mm.
blade thickness: 6.3mm.
total length: 172mm.
Weight: 95g.
Sheath: Kydex, neck
Package: Cardboard box with logos Extrema Ratio
Notes: possibility of using the sheath with MOLLE systems or Tek-Lok (not included in the package)ER-NK3K-SW -
ExtremaRatio - N.K.2 Stone Washed - Neck Knife - NK2
NK2 is a small knife that extends the family of the neck knives Extrema Ratio.
It differs from the model NK1 for blade-type "time" and for the increased thickness. The ergonomic grip is designed so as to prevent accidental cuts during withdrawal from the scabbard.
On the back it is formed a drain for the positioning of the thumb or index depending on use. The structure enables both use for work or cutting very effective for small precision work.The Kydex sheath is a quick release and is supplied to the port of paracord knife in his neck.
intended use: Neck Knife
type of production: Industrial
production country: Italy
Blade: stainless steel N690Co 58 / 60HRC
Blade treatment: Stone Washed
manicatura: stainless steel N690Co 58 / 60HRC
blade length: 50mm.
blade thickness: 6.3mm.
total length: 129mm.
Weight: 69g.
Sheath: Kydex, neck
Package: Cardboard box with logos Extrema Ratio
Notes: possibility of using the sheath with MOLLE systems or Tek-Lok (not included in the package)ER-NK2-SW -
ExtremaRatio - N.K.1 Neck Knife - SanMai V-TOKU2 - Limited Edition - NK1 - Knife
Japanese steel merges with Italian excellence
For this 2021 collaboration, exclusive to Coltelleria Collini, we have decided to propose a series of best sellers produced by Extrema Ratio. Knives made with the famous San Mai steel produced by the Japanese Takefu Steel. Specifically we have used the carbonaceous V-Toku2 at 62/63HRC for the central plate and the stainless SUS410 for the two external plates, in order to guarantee a very high cutting capacity, penetration and edge holding together with an easy resharpening and maintenance but at the same time the blade has a remarkable resistance to corrosion and an important increase of resilience given by the type of extreme steel and the laminated structure.
Intended Use: Neck Knife / Collector's Knife
Type of production: Industrial
Country of Production: Italy
Blade / Handle: Full, laminated Japanese steel (San Mai) with V-Toku2 (carbonaceous) cutting edge at 62/63HRC and SUS410 (stainless steel) outer cheeks
Blade finish: Satin finish
Blade length: 40mm.
Blade thickness: 3mm.
Total length: 129mm.
Weight: 55g.
Sheath: Kydex, for neck.
Packaging: Cardboard box with Extrema Ratio logos.
Notes: Numbered edition - cardboard box with Extremaratio logos and certificate - the central core of the blade and handle is made of carbon steel so it is recommended to wash/dry the knife very well after each use and protect the steel, during storage, with a light surface of lubricant to avoid rust and oxidation.As in the ancient swords of the Japanese Samurai.
The rolled steel - imported in Italy by Collini Steel directly from the Japanese Takefu Steel - is based on the ancient Japanese tradition in the creation of the famous Samurai swords. As early as 1100, expert Japanese blacksmiths combined different materials to give Katana swords incredible cutting capabilities combined with previously unknown strength and flexibility. It is thanks to this revolutionary construction technique that the Samurai swords have been preserved until our days becoming one of the most fascinating objects made by man. Following this tradition applied to modern metallurgy, we are now able to have technologically advanced steels already tested and used in cutlery also by famous brands such as Fallkniven, Cold Steel, Mcusta, Kai, Sog, Zwilling, Rockstead, etc.
Characteristics of San Mai steel: It is made of different types of metals alloyed together to create a composite that contains and intensifies the strengths of the metals individually taken:
- Longer cutting edge life
thanks to the use of high quality steels with a high carbon content (VG10, CoS, Shiro) or sintered (SPG2), in the core steel, the blade, once hardened, reaches hardness and cutting performance decidedly superior to those achieved with the use of traditional steels.- Greater resilience
Built on the principle of Japanese swords, the multilayer steel is difficult to break thanks to the toughness of the central steel (Core Steel) and the elasticity of the steel used for the lateral coating (Stainless Steel).- Improved corrosion resistance
The steel used for the outer layers (Stainless Steel) gives the blade a high resistance to corrosion. The combination of the two or more materials used by Takefu Steel generates, at a galvanic level, a structure that improves corrosion resistance even on the edge.- Easy machining even after heat treatment
Although steel normally becomes harder after hardening, the lateral steel used in multilayer machining does not lose its softness and allows easy machining, drilling or welding even after heat treatment. For optimum blade performance, cryogenic treatment is recommended.- Improved aesthetic performance
Knives made of multi-state steel or damask pattern at the end of the processing are aesthetically elegant, refined and highly appreciated by collectors all over the world.ER-NK1-CC -
ExtremaRatio - N.K. Steel Talon - Neck Knife - NKST - Knife
Knife with monolithic structure that allows the use for very effective cutting strokes, it is equipped with Kydex quick release sheath with paracord for the neck of the knife to the neck
Intended use: Neck Knife
Type of production: Industrial
Lama production: Italy
Blade: stainless steel N690Co 58 / 60HRC
Lama treatment: Stone Washed
Handle: stainless steel N690Co 58 / 60HRC
Blade length: 75mm.
Blade thickness: 3mm.
Total length: 188mm.
Weight: 91.5g.
Sheath: in Kydex, from collar
Packaging: cardboard box with Extrema Ratio logos
Notes: possibility to use the scabbard with M.O.L.L.E. o Tek-Lok (not included in the package)ER-NKST -
ExtremaRatio - N.K.3 Stone Washed - Neck Knife - NK3 - knife
NK3 is a small knife that extends the family of the neck knives Extrema Ratio.
It differs from the models NK1 and NK2 for the largest size of the blade-type "long" 70mm. The ergonomic grip is designed so as to prevent accidental cuts during withdrawal from the scabbard.
On the back it is formed a drain for the positioning of the thumb or index depending on use. The structure enables both use for work or cutting very effective for small precision work.
The Kydex sheath is a quick release and is supplied to the port of paracord knife in his neck.
intended use: Neck Knife
type of production: Industrial
production country: Italy
Blade: stainless steel N690Co 58 / 60HRC
Blade treatment: Stone Washed
manicatura: stainless steel N690Co 58 / 60HRC
blade length: 70mm.
blade thickness: 6.3mm.
total length: 153mm.
Weight: 82g.
Sheath: Kydex, neck
Package: Cardboard box with logos Extrema Ratio
Notes: possibility of using the sheath with MOLLE systems or Tek-Lok (not included in the package)12450