Knives, collection knife, tactical knives, outdoor knives, pocket knives and tools
-
Leatherman - 4.5" Nylon Sheath with Pockets for Signal and Surge - 934933 - Replacement Accessories
Protect your multifunction tool with these revised nylon sheaths.
Every detail is designed to ensure the cases last a long time, are reliable and easy to use. High-quality metal rivet snap allows for a secure closure that keeps the tool safe.
It is made of durable stretch ballistic nylon with reinforced seams for better accessibility and fit. Extra pockets in this nylon sheath are made to carry a bit kit, a bit extender, and a small flashlight or marker. It fits belts up to 4.5 cm wide. The overall fit may vary depending on the accessories carried.
COMPATIBILITY.
* Free P2
* Free P4
* Signal
* Super Tool
* Surge
INTERNAL DIMENSIONS
12 x 3.8 x 2 cmLE934933 -
Leatherman - Thread Cutter Replacement Kit - 930350 - Accessories
Wire cutter replacement kit includes a set of replacement wire cutter inserts, two screws and a #8 Torx screwdriver for installation. Wire cutter inserts are made of premium stainless steel.
COMPATIBLE WITH:
* MUT®
* OHT
* Charge®+
* Charge®+ Forest Camo
* Charge®+ TTi
* Rebar
* Heritage Rebar
* Super Tool® 300+
* Heritage Super Tool 300
* Surge
* Surge® black and silver
* Wave®+
* Wave® black and silver
* Heritage Wave+
* Heritage Charge+
* FREE™ P2
* FREE™ P4
* Signal
* Signal® Topo
* Charge®+ G10
* 2H WaveLE930350 -
Higonokami - Kanekoma knife - Black Small Pocket Knife Japan
Charming knife used by the Japanese farmer.
As is typical for many agricultural tools, this Japanese knife is also extremely simple but the result of a centuries-old improvement that has found the difficult balance between form and function, and between cost and benefit.
The main feature is certainly the quality of the blade, in fact it uses a three-layer San Mai steel, of which the very hard one in the center.
It has a razor wire, as befits a tool created to cut and not just to be displayed in display cases.
Blade: San Mai carbon steel - Yasuki Steel Blue Paper Steel 62hrc in clad
Handle: iron foil
Closing: without blade lock
Length closed: 92mm.
Blade length: 76mm.
Blade thickness: 2.7mm
Open length: 155mm
Weight: 33g.
Note:HIGO-06BL€21.31Only 11 left -
Leatherman - MOLLE Black XL sheath - LE930371 - Accessories
Compatible with the following Leatherman pliers:
* MUT®
* MUT® EOD
* Super Tool® 300
* Super Tool® 300 EOD
* Original Surge®
* Surge®
* Heritage Super Tool® 300
Heavy and robust nylon lining with Velcro closure and belt loop for both horizontal and vertical ports. Equipped with standard connections of the M.O.L.L.E. typeLE930366 -
Higonokami - Kanekoma - Miyamoto Musashi M Pocket Knife Japan
Higonokami - Kanekoma - Miyamoto Musashi M Pocket Knife Japan
Blade: Carbon Steel San Mai - Yasuki Steel Blue Paper Steel 60HRC clad in
Handle: iron sheet
Closure: Without lock blade
Closed Length: 97mm.
Blade length: 75mm.
Blade thickness: 3mm
Overall length: 172mm
Weight: 42g.
Notes: Engravings on the handle and the blade. Lubricate the blade otherwise easily subject to oxidation.HIGO07SL€23.77Only 4 left -
Higonokami - Kanekoma - Miyamoto Musashi S Pocket Knife Japan
Higonokami - Kanekoma - Miyamoto Musashi S Pocket Knife Japan
Blade: Carbon Steel San Mai - Yasuki Steel Blue Paper Steel 60HRC clad in
Handle: iron sheet
Closure: Without lock blade
Closed Length: 97mm.
Blade length: 65mm.
Blade thickness: 3mm
Overall length: 153mm
Weight: 46g.
Notes: Engravings on the handle and the blade. Lubricate the blade otherwise easily subject to oxidation.HIGO-06SL€21.31Only 12 left -
EnZo - Birk 75 Knife - Flat Plain CPMS30V - Black G10 - 2602 - knife
Intended Use: Hunting/Sporting
Production type: Industrial
Country of Production: Finland
Blade: stainless steel CPM-S30V
Blade finish: satin finish
Handle: G10 Black
Blade length: 75mm.
Blade thickness: 2.5mm.
Length closed: 103mm.
Total length: 178mm.
Thickness when closed: 7mm.
Weight: 100g.
Closure: Liner Lock
Clip: Stainless Steel
Packaging: cardboard box with Enzo Knives logos
Notes: -EN-2602 -
Leatherman - Fodero MOLLE Black 4" - 931005 - Accessori
Compatibile con le seguenti pinze Leatherman:
* Sidekick
* Wingman
* Blast
* Kick
* Fuse
* Crunch
* Wave
* Charge
Fodero in pesante e robusto Nylon con chiusura in velcro e passante da cintura sia per porto orizzontale che per porto verticale. Dotato di attacchi standard di tipo M.O.L.L.E.LE931005 -
Higonokami - Sadakoma Higo in black leather - PRIVATE COLLECTION - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased.
* Condition: Overall in very good condition
* Commercially available: Discontinued
* Sharpening: Factory sharpened
* Marks on blade: None
* Marks on handle: None
* Box: Present
* Scabbard: -
* Manuals, Certificates and Warranties: -
* Checked and Certified by our in-house laboratoryFascinating knife used by the Japanese farmer "Higonokami kanekoma."
As is typical for many agricultural tools, this Japanese knife turns out to be extremely simple but the result of centuries of refinement that has found the difficult balance between form and function, and between cost and benefit.
The main feature definitely turns out to be the quality of the blade, in fact it uses a three-layer San Mai steel of which the one in the center is extremely hard.
Production: Japanese craftsmanship
Blade: San Mai carbon steel - Yasuki Steel Blue Paper Steel 62hrc
Handle: brass foil with elegant black leather cover
Closure: without blade lock
Length closed: 120mm.
Blade length: 90mm.
Blade thickness: 3mm
Length open: 210mm
Weight: 72g.
Notes: lubricate the blade well otherwise easily subject to oxidation.
Packaging: elegant and fine wooden box with Japanese ideograms.018208-CP€0.00Only -20 leftOut of stock -
Leatherman - Ainsworth 4" Premium Leather Sheath - 934935 - Accessories
The Ainsworth sheath is made in Slovakia with premium full-grain leather, tanned with plant extracts and offers premium protection for your tool.
It is the best we have created to date. The Ainsworth leather sheath is made from drum-dyed, full-grain, vegetable-tanned cowhide. This treatment makes the leather fine and able to improve with time. The snap, customized button keeps your tool safe over years of use.
This sheath is premium protection for your Leatherman and is covered by our two-year warranty. It fits belts up to 4.5 cm wide. Internal capacity: 10.2 x 3.8 x 2 cm
Compatible with the following Leatherman pliers:
* Free P2
* Free P4
* Charge+
* Wave+
* Wingman
* Sidekick
* Rev
* Rebar
* SkeletoolLE934935 -
Leatherman - 3-Way Magnetic Ratchet Screwdriver - 931030 - Accessories
Magnetic bit holder that allows secure positioning of both Leatherman flat and standard 63mm bits.
Compact 3-way ratchet system that allows continuous rotation in one direction, avoiding tool repositioning. The 3-way allows for a forward, reverse and locked setting.
SPECIFICATIONS
Length: 8.28 cm
Weight: 35.7 gCOMPATIBILITY:
* MUT (all versions)
* Charge (all versions)
* Charge+ (all versions)
* Signal (all versions)
* Skeletool (all versions)
* Super Tool 300M
* Surge (all versions)
* Wave (all versions)
* Wave+ (all versions)LE931030 -
Higonokami - Kanekoma knife - Black Medium Pocket Knife Japan
Charming knife used by the Japanese farmer.
As is typical for many agricultural implements, this Japanese knife is also extremely simple but the result of a centuries-old improvement that has found the difficult balance between form and function, and between cost and benefit.
The main feature is certainly the quality of the blade, in fact it uses a three-layer San Mai steel, of which the very hard one in the center.
It has a razor wire, as befits a tool created to cut and not just to be displayed in display cases.
Blade: San Mai carbon steel - Yasuki Steel Blue Paper Steel 62hrc in clad
Handle: iron foil
Closing: without blade lock
Length closed: 11mm.
Blade length: 72mm.
Blade thickness: 2.7mm
Open length: 170mm
Weight: 42g.
Note:HIGO-07BL€23.77Only 0 leftOut of stock -
Leatherman - Skeletool KB - folding knife
Intended use: Sports
Type of production: Industrial
Country of production: USA
Blade: 420HC stainless steel
Blade treatment: Satind
Handle: 6061-T6 aluminum
Blade length: 66mm.
Blade thickness: 2.6mm.
Length closed: 87mm.
Overall length: 151mm.
Thick when closed: 11mm.
Balancing: -
Weight: 38g.
Opening: hole on the blade
Washers: in brass
Closure: Liner Lock
Clip: stainless steel, removable, with the function of a bottle opener
Sheath: -
Packaging: Cardboard box with Leatherman logos
Note: -LE832385 -
EnZo - Birk 75 knife - D2 - Curly Birch - 2530 - knife
Intended use: Hunting / Sports
Type of production: Semi-Industrial
Lama production: Finland
Blade: in steel D2
Blade treatment: -
Handle: birch root
Blade length: 75mm.
Blade thickness: 3mm.
Length closed: 103mm.
Total length: 178mm.
Thick when closed: 7mm.
Balancing: -
Weight: 100g.
Closure: Liner Lock
Clip: Stainless Steel
Sheath: -
Packaging: Cardboard box with EnZo logos
Notes: Scandi type sharpeningEN-2530 -
EnZo - PK 70 Flat - CPM-S30V - G10 Black - 2911 - knife
EnZo - PK 70 Flat - CPM-S30V - G10 Black - 2911 - knife
Intended Use: Hunting / Sports
Production Type: Semi-Industrial
Production Lama: Finland
Blade: stainless steel CPM-S30V
Treatment Lama: -
Handle: G10 Black
Blade length: 70mm.
Blade thickness: 2mm.
Closed Length: 93mm.
Overall length: 170mm.
Thick when closed: 9mm.
Balancing: -
Weight: 78g.
Closure: Without lock blade - retention spring back
Clip: -
Sheath: -
Packaging: -
Notes: Sharpening type Scandi Zero
Notes: Cutlery Collini is distributor for Italy knives EnzoEN2911 -
EnZo - Trapper 95 - D2 - Green Canvas Micarta - 2016 knife
EnZo - Trapper 95 - D2 - Green Canvas Micarta - 2016 knife
Intended Use: Hunting / Sports
Production Type: Semi-Industrial
Production Lama: Finland
Blade: stainless steel D2
Treatment Lama: -
Handle: Micarta Green
Blade length: 95mm.
Blade thickness: 3.5mm.
Length closed: -
Overall length: 207mm.
Thick when closed: -
Balancing: -
Weight: 146g.
Closing: -
Clip: -
Sheath: Leather
Packaging: Cardboard box with logos EnZo
Notes: Sharpening type Scandi
Notes: Cutlery Collini is distributor for Italy knives EnzoEN2016 -
EnZo - Elver 85 - D2 - Green Canvas Micarta - 2205 knife
EnZo - Elver 85 - D2 - Green Canvas Micarta - 2205 knife
Intended Use: Hunting / Sports
Production Type: Semi-Industrial
Production Lama: Finland
Blade: Steel D2
Treatment Lama: -
Handle: Micarta Black Green
Blade length: 80mm.
Blade thickness: 3.5mm.
Length closed: -
Overall length: 187mm.
Thick when closed: -
Balancing: -
Weight: 120g.
Closing: -
Clip: -
Sheath: Leather
Packaging: Cardboard box with logos EnZo
Notes: Sharpening type FlatEN2205 -
Kanekoma - Sadakoma Higo traditional Japanese knife - brown leather 018 209 - knife
Kanekoma - Sadakoma Higo traditional Japanese knife - brown leather 018 209 - knife
Charming knife used by the Japanese farmer " Higonokami kanekoma ."
As is typical for many agricultural tools , this Japanese knife is extremely simple but the result of a secular improvement that has found it difficult balance between form and function, and between cost and benefit.
The main feature is definitely the quality of the blade, in fact, uses a steel San Mai to three layers of which the one at the center rough .
It has a razor wire , as is appropriate for a tool to cut and not just born to be displayed in glass cases .
production: Japanese crafts
Blade : carbon steel, San Mai
Handle: black brass plate with elegant brown leather cover
Closure: Without lock blade
Closed Length : 120mm .
Blade length : 90mm .
Blade thickness : 3mm
Length open : 210mm
Weight: 72g .
Notes: lubricate the blade otherwise easily subject to oxidation .
Packing: elegant and fine wooden box with Japanese characters018209€0.00Only -20 leftOut of stock -
EnZo - PK 70 - CPM-S30V - Birch - 2902 - knife
EnZo - PK 70 - CPM-S30V - Birch - 2902 - knife
Intended use: Hunting / Sporting
Production Type: Semi-Industrial
Production Blade: Finland
Blade: Stainless steel CPM-S30V
Treatment Blade: -
Handle: Birch Wood
Blade length: 70mm.
Blade thickness: 2mm.
Closed Length: 93mm.
Overall length: 170mm.
Thickness when folded: 9mm.
Balancing: -
Weight: 82g.
Closure: Without Lock Blade - retention spring back
Clip: -
Sheath: -
Packaging: Cardboard box with logos EnZo
Notes: Sharpening type Scandi Zero
Notes: Collini Cutlery is the distributor for Italy Enzo knives2902enzo -
EnZo - PK 70 Flat - CPM-S30V - Carbon fiber - 2904 - knife
Intended use: Hunting / Sports
Type of production: Semi-Industrial
Lama production: Finland
Blade: CPM-S30V stainless steel
Blade treatment: -
Handle: carbon fiber
Blade length: 70mm.
Blade thickness: 2mm.
Length closed: 93mm.
Total length: 170mm.
Thick when closed: 9mm.
Balancing: -
Weight: 82g.
Closing: No blade lock - Rear retention spring
Clip: -
Sheath: -
Packaging: Cardboard box with EnZo logos
Notes: Sharpening of the full flat type2904enzo -
EnZo - Birk 75 - CPMS30W - Carbon Fiber - 2701 - knife
EnZo - Birk 75 - CPMS30W - Carbon Fiber - 2701 - knife
Intended use: Hunting / Sporting
Production Type: Semi-Industrial
Production Blade: Finland
Blade: Stainless CPMS30W
Treatment Blade: -
Handle material: carbon fiber
Blade length: 75mm.
Blade thickness: 2.5mm.
Closed Length: 103mm.
Overall length: 178mm.
Thickness when folded: 7mm.
Balancing: -
Weight: 102g.
Lock: Liner Lock
Clip: Stainless Steel
Sheath: -
Packaging: Cardboard box with logos EnZo
Notes: Sharpening type Scandi
Notes: Collini Cutlery is the distributor for Italy Enzo knivesENZO2701 -
EnZo - PK 70 - CPM-S30V - Carbon fiber - 2901 - knife
EnZo - PK 70 - CPM-S30V - Carbon fiber - 2901 - knife
Intended use: Hunting / Sporting
Production Type: Semi-Industrial
Production Blade: Finland
Blade: Stainless steel CPM-S30V
Treatment Blade: -
Handle material: carbon fiber
Blade length: 70mm.
Blade thickness: 2mm.
Closed Length: 93mm.
Overall length: 170mm.
Thickness when folded: 9mm.
Balancing: -
Weight: 86g.
Closure: Without Lock Blade - retention spring back
Clip: -
Sheath: -
Packaging: Cardboard box with logos EnZo
Notes: Sharpening Flat type
Notes: Collini Cutlery is the distributor for Italy Enzo knivesenzo2901 -
DPX Gear - H.E.F.T. 4" Assault Fixed Blade - knife
H.E.F.T. Hostile Environment Field Tool
Knife, a collaboration between the American DPX Gear and the Italian company Lion SteelIntended Use: Sport / Tactical
Type of production: Semi-Industrial
Production Blade: Italy
Blade: Sleipner Steel 60HRC
Treatment Blade: satin black PVD TiCN coating
Handle: Black G10
Blade length: 100mm.
Blade thickness: 5mm.
Total length: 230mm.
Balance: Central
Weight: 200g.
Designed: by Thomas Rumici & Robert Young Pelton
Sheath: Cordura
Packaging: carton box with logos DPX GEAR2846S -
DPX Gear - H.E.F.T. 4" Woodsman Fixed Blade - coltello
H.E.F.T. Hostile Environment Field Tool
Coltello nato dalla collaborazione tra l'americana DPX Gear e l'azienda italiana Lion Steel
Destinazione d'uso: Sportivo / Tattico / Caccia
Tipo di produzione: Semi-Industriale
Produzione Lama: Italia
Lama: Sleipner Steel 60HRC
Trattamento Lama: stone washed
Manicatura: Santos, legno brasiliano
Lunghezza lama: 100mm.
Spessore lama: 5mm.
Lunghezza totale: 230mm.
Bilanciatura: centrale
Peso: 170g.
Designed: by Robert Young Pelton
Fodero: cuoio
Confezione: scatola in cartone con loghi DPX GEAR2845S -
DPX Gear - H.E.F.T. 6 "Assault Fixed Blade - Knife
DPX Gear - H.E.F.T. 6 "Assault Fixed Blade - Knife
H.E.F.T. Hostile Environment Field Tool
Knife, a collaboration between the American DPX Gear and the Italian company Lion SteelIntended Use: Sport / Tactical
Type of production: Semi-Industrial
Production Blade: Italy
Blade: Sleipner Steel 60HRC
Treatment Blade: satin black PVD TiCN coating
Handle: Black G10
Blade length: 146mm.
Blade thickness: 5mm.
Total length: 285mm.
Balance: Central
Weight: 290g.
Designed: by Thomas Rumici & Robert Young Pelton
Sheath: Cordura
Packaging: cardboard box with logos DPX GEAR2846 -
DPX Gear - H.E.F.T. 6 "Woodsman Fixed Blade - Knife
DPX Gear - H.E.F.T. 6 "Woodsman Fixed Blade - Knife
H.E.F.T. Hostile Environment Field Tool
Knife, a collaboration between the American DPX Gear and the Italian company Lion SteelIntended Use: Sport / Tactical / Hunting
Type of production: Semi-Industrial
Production Blade: Italy
Blade: Sleipner Steel 60HRC
Treatment Blade: stonewashed
Handle: Santos, Brazilian wood
Blade length: 146mm.
Blade thickness: 5mm.
Total length: 285mm.
Balance: Central
Weight: 255g.
Designed: by Robert Young Pelton
Sheath: Leather
Packaging: cardboard box with logos DPX GEAR2845 -
DPX Gear - H.E.S.T. Folder D2 - knife
DPX Gear - H.E.S.T. Folder D2 - knife
Intended Use: Sport / Tactical
Type of production: Semi-Industrial
Production Blade: Italy
Blade: D2 60/61HRC
Treatment Blade: Milspec Black Coated
Handle: Titanium and G10
Blade length: 75mm.
Blade thickness: 5mm.
Total length: 195mm.
Thick when closed: 14mm.
Balance: -
Weight: 138g.
Closure: Frame Lock with security system Rotoblock
Clip: removable and reversible, stainless steel
Sheath: -
Packaging: wooden box with logos DPX GEAR
Notes: supplied key purpose for removal and adjustmentDPHSF005 -
DPX Gear - H.E.S.T. II Fixed Blade - Knife
DPX Gear - H.E.S.T. II Fixed Blade - Knife
Intended Use: Sport / Tactical
Type of production: Semi-Industrial
Production Blade: Italy
Blade: Sleipner Steel 60HRC
Treatment Blade: Milspec Black PVD Coated
Handle material: G10
Blade length: 80mm.
Blade thickness: 5mm.
Total length: 193mm.
Thick when closed: 14mm.
Balance: -
Weight: 136g.
Sheath: Cordura
Packaging: cardboard box with logos DPX GEAR2841 -
DPX Gear - H.E.S.T. II Woodsman Fixed Blade - Knife
DPX Gear - H.E.S.T. II Woodsman Fixed Blade - Knife
Knife, a collaboration between the American DPX Gear and the Italian company Lion Steel
Intended Use: Sport / Tactical / Hunting
Type of production: Semi-Industrial
Production Blade: Italy
Blade: Sleipner Steel 60HRC
Treatment Blade: stonewashed
Handle: Santos, Brazilian wood
Blade length: 80mm.
Blade thickness: 5mm.
Total length: 193mm.
Thick when closed: 14mm.
Balance: Central
Weight: 136g.
Designed: by Robert Young Pelton
Sheath: Leather
Packaging: cardboard box with logos DPX GEAR2843 -
DPX Gear - H.E.S.T. Original Fixed Blade - Knife
DPX Gear - H.E.S.T. Original Fixed Blade - Knife
Intended Use: Sport / Tactical
Type of production: Semi-Industrial
Production Lama USA
Blade: High Carbon Steel 1095 57-58HRC
Treatment Blade: Black powder coating
Handle: Green Canvas Micarta
Blade length: 80mm.
Blade thickness: 5mm.
Total length: 193mm.
Thick when closed: 14mm.
Balance: Central
Weight: 139g.
Designed: by Robert Young Pelton
Sheath: Cordura
Packaging: cardboard box with logos DPX GEAR2842 -
EnZo - Birk 75 - CPM-S30V Flat - Carbon Fiber - 2601 - coltello
Destinazione d'uso: Caccia/Sportivo
Tipo di produzione: Semi-Industriale
Produzione Lama: Finlandia
Lama: in acciaio inox CPM-S30V
Trattamento Lama: -
Manicatura: fibra di carbonio
Lunghezza lama: 75mm.
Spessore lama: 2.5mm.
Lunghezza chiuso: 103mm.
Lunghezza totale: 178mm.
Spessore da chiuso: 7mm.
Bilanciatura: -
Peso: 94g.
Chiusura: Liner Lock
Clip: Acciaio Inox
Fodero: -
Confezione: Scatola di cartone con loghi EnZo
Note: Affilatura di tipo Flat
Note:la Coltelleria Collini è distributore per l'Italia dei coltelli Enzo7373C -
EnZo - Birk 75 - CPM-S30V Flat - Carbon Fiber Bolsters - 2601 - coltello
Destinazione d'uso: Caccia/Sportivo
Tipo di produzione: Semi-Industriale
Produzione Lama: Finlandia
Lama: in acciaio inox CPM-S30V
Trattamento Lama: -
Manicatura: fibra di carbonio ed acciaio inox
Lunghezza lama: 75mm.
Spessore lama: 2.5mm.
Lunghezza chiuso: 103mm.
Lunghezza totale: 178mm.
Spessore da chiuso: 7mm.
Bilanciatura: -
Peso: 104g.
Chiusura: Liner Lock
Clip: Acciaio Inox
Fodero: -
Confezione: Scatola di cartone con loghi EnZo
Note: Affilatura di tipo Flat
Note: la Coltelleria Collini è distributore per l'Italia dei coltelli Enzo7373CT -
EnZo - Birk 75 - D2 - Carbon Fiber - 2501 - coltello
Destinazione d'uso: Caccia/Sportivo
Tipo di produzione: Semi-Industriale
Produzione Lama: Finlandia
Lama: in acciaio D2
Trattamento Lama: -
Manicatura: fibra di carbonio
Lunghezza lama: 75mm.
Spessore lama: 2.5mm.
Lunghezza chiuso: 103mm.
Lunghezza totale: 178mm.
Spessore da chiuso: 7mm.
Bilanciatura: -
Peso: 102g.
Chiusura: Liner Lock
Clip: Acciaio Inox
Fodero: -
Confezione: Scatola di cartone con loghi EnZo
Note: Affilatura di tipo Scandi
Note: la Coltelleria Collini è distributore per l'Italia dei coltelli Enzo7370C -
EnZo - Birk 75 - D2 - Holm Oak - 2503 - coltello
Destinazione d'uso: Caccia/Sportivo
Tipo di produzione: Semi-Industriale
Produzione Lama: Finlandia
Lama: in acciaio D2
Trattamento Lama: -
Manicatura: legno di olmo
Lunghezza lama: 75mm.
Spessore lama: 2.5mm.
Lunghezza chiuso: 103mm.
Lunghezza totale: 178mm.
Spessore da chiuso: 7mm.
Bilanciatura: -
Peso: 102g.
Chiusura: Liner Lock
Clip: Acciaio Inox
Fodero: -
Confezione: Scatola di cartone con loghi EnZo
Note: Affilatura di tipo Scandi
Note: la Coltelleria Collini è distributore per l'Italia dei coltelli Enzo7370O -
EnZo - Birk 75 - Scandi Plain D2- Birch Burl - 2602 - knife
Intended Use: Hunting/Sporting
Production type: Industrial
Country of Production: Finland
Blade: D2 steel
Blade finish: Satin finish
Handle: birch briar
Blade length: 75mm.
Blade thickness: 2.5mm.
Length closed: 103mm.
Total length: 178mm.
Thickness when closed: 7mm.
Weight: 102g.
Closure: Liner Lock
Clip: Stainless steel
Packaging: Cardboard box with EnZo logos
Notes: Scandi type sharpeningEN-2502 -
EnZo - Camper 125 - D2 - Black Canvas Micarta - 2083 - knife
EnZo - Camper 125 - D2 - Black Canvas Micarta - 2083 - knife
Intended use: Hunting / Sporting
Production Type: Semi-Industrial
Production Blade: Finland
Blade: Stainless D2
Treatment Blade: -
Handle: Black Micarta
Blade length: 125mm.
Blade thickness: 3.5mm.
Length closed: -
Overall length: 245mm.
Thick when closed: -
Balancing: -
Weight: 160g.
Closure: -
Clip: -
Sheath: Leather
Packaging: Cardboard box with logos EnZo
Notes: Sharpening type Scandi Micro Bevel
Notes: Collini Cutlery is the distributor for Italy Enzo knives7365B -
EnZo - Camper 125 - D2 - Curly Birch - 2081 - knife
EnZo - Camper 125 - D2 - Curly Birch - 2081 - knife
Intended use: Hunting / Sports
Type of production: Semi-Industrial
Production Blade: Finland
Blade: Stainless D2
Treatment Lama: -
Handle: Birch Burl
Blade length: 125mm.
Blade thickness: 3.5mm.
Length closed: -
Total length: 245mm.
Thick when closed: -
Balance: -
Weight: 160g.
Closing: -
Clip: -
Sheath: Leather
Packaging: Cardboard box with logos EnZo
Notes: Sharpening type Scandi Micro Bevel
Notes: Collini Cutlery is the distributor for Italy of the knives Enzo7365R -
EnZo - Camper 125 - D2 - Green Canvas Micarta - 2082 - coltello
Destinazione d'uso: Caccia/Sportivo
Tipo di produzione: Semi-Industriale
Produzione Lama: Finlandia
Lama: in acciaio D2
Trattamento Lama: -
Manicatura: Micarta Verde
Lunghezza lama: 125mm.
Spessore lama: 3.5mm.
Lunghezza chiuso: -
Lunghezza totale: 245mm.
Spessore da chiuso: -
Bilanciatura: -
Peso: 160g.
Chiusura: -
Clip: -
Fodero: Cuoio
Confezione: Scatola di cartone con loghi EnZo
Note: Affilatura di tipo Scandi Micro Bevel
Note: la Coltelleria Collini è distributore per l'Italia dei coltelli Enzo7365G -
EnZo - PK 70 - CPM-S30V Flat - Black G10 Bolsters - 2905 - coltello
Destinazione d'uso: Caccia/Sportivo
Tipo di produzione: Semi-Industriale
Produzione Lama: Finlandia
Lama: in acciaio inox CPM-S30V
Trattamento Lama: -
Manicatura: G-10 ed acciaio inox
Lunghezza lama: 70mm.
Spessore lama: 2mm.
Lunghezza chiuso: 93mm.
Lunghezza totale: 170mm.
Spessore da chiuso: 9mm.
Bilanciatura: -
Peso: 82g.
Chiusura: Molla di ritenzione posteriore
Clip: -
Fodero: -
Confezione: Scatola di cartone con loghi EnZo
Note: Affilatura di tipo Flat
Note: la Coltelleria Collini è distributore per l'Italia dei coltelli Enzo7375GT -
EnZo - Trapper 95 - CPM-S30V - Green Canvas Micarta - 2062 coltello
Destinazione d'uso: Caccia/Sportivo
Tipo di produzione: Semi-Industriale
Produzione Lama: Finlandia
Lama: in acciaio inox CPM-S30V
Trattamento Lama: -
Manicatura: Micarta Verde
Lunghezza lama: 95mm.
Spessore lama: 3.5mm.
Lunghezza chiuso: -
Lunghezza totale: 207mm.
Spessore da chiuso: -
Bilanciatura: -
Peso: 146g.
Chiusura: -
Clip: -
Fodero: Cuoio
Confezione: Scatola di cartone con loghi EnZo
Note: Affilatura di tipo Flat
Note: la Coltelleria Collini è distributore per l'Italia dei coltelli Enzo7361 -
EnZo - Trapper 95 - O1 - Black Canvas Micarta - 2018 knife
EnZo - Trapper 95 - O1 - Black Canvas Micarta - 2018 knife
Intended use: Hunting / Sporting
Production Type: Semi-Industrial
Production Blade: Finland
Blade: Stainless O1
Treatment Blade: -
Handle: Black Micarta
Blade length: 95mm.
Blade thickness: 3.5mm.
Length closed: -
Overall length: 207mm.
Thick when closed: -
Balancing: -
Weight: 146g.
Closure: -
Clip: -
Sheath: Leather
Packaging: Cardboard box with logos EnZo
Notes: Sharpening type Scandi7360