Knives, collection knife, tactical knives, outdoor knives, pocket knives and tools
-
Leatherman - 4.5" Nylon Sheath with Pockets for Signal and Surge - 934933 - Replacement Accessories
Protect your multifunction tool with these revised nylon sheaths.
Every detail is designed to ensure the cases last a long time, are reliable and easy to use. High-quality metal rivet snap allows for a secure closure that keeps the tool safe.
It is made of durable stretch ballistic nylon with reinforced seams for better accessibility and fit. Extra pockets in this nylon sheath are made to carry a bit kit, a bit extender, and a small flashlight or marker. It fits belts up to 4.5 cm wide. The overall fit may vary depending on the accessories carried.
COMPATIBILITY.
* Free P2
* Free P4
* Signal
* Super Tool
* Surge
INTERNAL DIMENSIONS
12 x 3.8 x 2 cmLE934933 -
Horl - 2 PRO - diamond and ceramic disc sharpener - Made in Germany
With HORL ® 2 Pro, Otmar and Timo Horl are making a very personal dream come true. With a high precision internal planetary gear, it triples the grinding motion generated by a simple rolling motion. Therefore, HORL ® 2 Pro sharpens at triple speed. The solid components made of stainless steel and aluminum give it a particularly noble appearance.
TWO DISCS
DIAMOND ABRASIVE The industrial diamonds used are suitable for effectively sharpening all steel for knives of any degree of hardness without water. When used correctly, the HORL ® Diamond Standard never needs to be replaced. The 46 μm grain size sharpens efficiently and precisely. In a short time, a high-quality sharpening result is achieved. The discs of the HORL ® 2 CRUISE are not replaceable
CERAMIC SANDING WHEEL After processing with HORL ® Diamond Standard, the ceramic sanding disc noticeably improves the sanding result. Only a few movements are needed for this. The result is a smooth, clean and filigree sharp knife edge.
SUPERIOR EFFICIENCY
Industrial diamonds are considered to be one of the most durable and effective abrasives on the market. Monocrystalline diamonds are harder than any knife steel. Using a galvanic process, the diamonds in the HORL ® Diamond Standard are set at approx. 55% in a nickel bed. After the first grinding processes, the initially rough surface becomes finer and HORL® Diamond Standard achieves the ideal sanding surface.
HOR-2PRO -
Horl - 2 OAK - sharpener with diamond and ceramic disc - Made in Germany
HORL ® 2 is the latest technological benchmark in the HORL ® family of sharpeners. Two sharpening angles and interchangeable grinding discs ensure greater flexibility. A completely new, play-free rolling sensation is created by the integrated ball bearings. The ceramic coating on the smoothing side guarantees impressive finishing results.
TWO DISCS
DIAMOND ABRASIVE The industrial diamonds used are suitable for effectively sharpening all steel for knives of any degree of hardness without water. When used correctly, the HORL ® Diamond Standard never needs to be replaced. The 46 μm grain size sharpens efficiently and precisely. In a short time, a high-quality sharpening result is achieved. The discs of the HORL ® 2 CRUISE are not replaceable
CERAMIC SANDING WHEEL After processing with HORL ® Diamond Standard, the ceramic sanding disc noticeably improves the sanding result. Only a few movements are needed for this. The result is a smooth, clean and filigree sharp knife edge.
SUPERIOR EFFICIENCY
Industrial diamonds are considered to be one of the most durable and effective abrasives on the market. Monocrystalline diamonds are harder than any knife steel. Using a galvanic process, the diamonds in the HORL ® Diamond Standard are set at approx. 55% in a nickel bed. After the first grinding processes, the initially rough surface becomes finer and HORL® Diamond Standard achieves the ideal sanding surface.
HOR-2QUERCIA -
Horl - 2 WALNUT - sharpener with diamond and ceramic disc - Made in Germany
HORL ® 2 is the latest technological benchmark in the HORL ® family of sharpeners. Two sharpening angles and interchangeable grinding discs ensure greater flexibility. A completely new, play-free rolling sensation is created by the integrated ball bearings. The ceramic coating on the smoothing side guarantees impressive finishing results.
TWO DISCS
DIAMOND ABRASIVE The industrial diamonds used are suitable for effectively sharpening all steel for knives of any degree of hardness without water. When used correctly, the HORL ® Diamond Standard never needs to be replaced. The 46 μm grain size sharpens efficiently and precisely. In a short time, a high-quality sharpening result is achieved. The discs of the HORL ® 2 CRUISE are not replaceable
CERAMIC SANDING WHEEL After processing with HORL ® Diamond Standard, the ceramic sanding disc noticeably improves the sanding result. Only a few movements are needed for this. The result is a smooth, clean and filigree sharp knife edge.
SUPERIOR EFFICIENCY
Industrial diamonds are considered to be one of the most durable and effective abrasives on the market. Monocrystalline diamonds are harder than any knife steel. Using a galvanic process, the diamonds in the HORL ® Diamond Standard are set at approx. 55% in a nickel bed. After the first grinding processes, the initially rough surface becomes finer and HORL® Diamond Standard achieves the ideal sanding surface.
HOR-2NOCE -
Horl - 2 CRUISE - sharpener with diamond and steel disc - Made in Germany
The HORL ® 2 CRUISE incorporates our state of the art development with a focus on the essential. A constant sharpening angle, our durable diamond coating and a beautiful "chalk" color make HORL ® 2 CRUISE an all-round talent for sharpness in any kitchen. The 20 ° sharpening angle produces fast sharpening results and a stable cutting edge with long-lasting sharpening.
TWO DISCS
DIAMOND ABRASIVE The industrial diamonds used are suitable for effectively sharpening all steel for knives of any degree of hardness without water. When used correctly, the HORL ® Diamond Standard never needs to be replaced. The 46 μm grain size sharpens efficiently and precisely. In a short time, a high-quality sharpening result is achieved. The discs of the HORL ® 2 CRUISE are not replaceable
FOR STAINLESS STEEL SANDING After the sharpening process with the diamond disc, the stainless steel sanding disc smoothes the blade and removes any burrs with the help of its integrated grooves. Only a few movements are needed. The discs of the HORL ® 2 CRUISE are not editable
SUPERIOR EFFICIENCY
Industrial diamonds are considered to be one of the most durable and effective abrasives on the market. Monocrystalline diamonds are harder than any knife steel. Using a galvanic process, the diamonds in the HORL ® Diamond Standard are set at approx. 55% in a nickel bed. After the first grinding processes, the initially rough surface becomes finer and HORL® Diamond Standard achieves the ideal sanding surface.
20 ° SHARPENING ANGLE FOR STABLE SHARPNESS
The 20 ° sharpening angle offers a new sharpness in the shortest possible time. The knife also maintains its sharpness for a long time thanks to the stable cutting edge and is suitable for the widest range of cuts in everyday life in the kitchen. Also excellent for sharpening knives for sports and outdoor use.
THE HORL ® S-PAD FOR CONTINUOUS FLEXIBILITY IN GRINDING
The combination of powerful neodymium magnets and the HORL ® S-Pad ensure that the knife is firmly fixed when sharpening. Reinforced by the non-slip effect of the S-Pad, even small blades can be sharpened correctly by adapting them to the desired height.
HOR-2CRUISE -
Horl - premium sharpening set - 3000 and 6000 stones - strop - SET - Made in Germany
Set consisting of two discs of sharpening stones with # 3000 and # 6000 grit and a leather strop to be used at the end to free the blade of all grinding residues and provide the final sharpening.
The set is designed to further refine the result of the sharpening process after using the diamond and ceramic discs, which are standard in HORL ® sharpeners.
The two discs are simply screwed onto the sharpener instead of the stock ones and are intended to refine the edge of the blade of your high-level knives. The stones can be used without water.
Compatible with HORL ® Sharpener 1. Gen, HORL ® 2 and HORL ® 2 PRO.
This item is not compatible with HORL ® 2 CRUISE.
Strop: Measurements: 25 x 5 cm - Thickness: 5mm
HOR-SET -
Horl - strip of cowhide for sharpening - strop - AL-P - Made in Germany
Original HORL ® leather made from vegetable tanned cowhide for a professional finish after sharpening. Thanks to its fine-pored surface, the blade is perfectly freed from even the finest residues on the edge after sharpening on stone.
Measurements: 25 x 5 cm - Thickness: 5mm
HOR-AL-P -
Leatherman - Thread Cutter Replacement Kit - 930350 - Accessories
Wire cutter replacement kit includes a set of replacement wire cutter inserts, two screws and a #8 Torx screwdriver for installation. Wire cutter inserts are made of premium stainless steel.
COMPATIBLE WITH:
* MUT®
* OHT
* Charge®+
* Charge®+ Forest Camo
* Charge®+ TTi
* Rebar
* Heritage Rebar
* Super Tool® 300+
* Heritage Super Tool 300
* Surge
* Surge® black and silver
* Wave®+
* Wave® black and silver
* Heritage Wave+
* Heritage Charge+
* FREE™ P2
* FREE™ P4
* Signal
* Signal® Topo
* Charge®+ G10
* 2H WaveLE930350 -
Leatherman - MOLLE Black XL sheath - LE930371 - Accessories
Compatible with the following Leatherman pliers:
* MUT®
* MUT® EOD
* Super Tool® 300
* Super Tool® 300 EOD
* Original Surge®
* Surge®
* Heritage Super Tool® 300
Heavy and robust nylon lining with Velcro closure and belt loop for both horizontal and vertical ports. Equipped with standard connections of the M.O.L.L.E. typeLE930366 -
Leatherman - Fodero MOLLE Black 4" - 931005 - Accessori
Compatibile con le seguenti pinze Leatherman:
* Sidekick
* Wingman
* Blast
* Kick
* Fuse
* Crunch
* Wave
* Charge
Fodero in pesante e robusto Nylon con chiusura in velcro e passante da cintura sia per porto orizzontale che per porto verticale. Dotato di attacchi standard di tipo M.O.L.L.E.LE931005 -
Leatherman - Ainsworth 4" Premium Leather Sheath - 934935 - Accessories
The Ainsworth sheath is made in Slovakia with premium full-grain leather, tanned with plant extracts and offers premium protection for your tool.
It is the best we have created to date. The Ainsworth leather sheath is made from drum-dyed, full-grain, vegetable-tanned cowhide. This treatment makes the leather fine and able to improve with time. The snap, customized button keeps your tool safe over years of use.
This sheath is premium protection for your Leatherman and is covered by our two-year warranty. It fits belts up to 4.5 cm wide. Internal capacity: 10.2 x 3.8 x 2 cm
Compatible with the following Leatherman pliers:
* Free P2
* Free P4
* Charge+
* Wave+
* Wingman
* Sidekick
* Rev
* Rebar
* SkeletoolLE934935 -
Leatherman - 3-Way Magnetic Ratchet Screwdriver - 931030 - Accessories
Magnetic bit holder that allows secure positioning of both Leatherman flat and standard 63mm bits.
Compact 3-way ratchet system that allows continuous rotation in one direction, avoiding tool repositioning. The 3-way allows for a forward, reverse and locked setting.
SPECIFICATIONS
Length: 8.28 cm
Weight: 35.7 gCOMPATIBILITY:
* MUT (all versions)
* Charge (all versions)
* Charge+ (all versions)
* Signal (all versions)
* Skeletool (all versions)
* Super Tool 300M
* Surge (all versions)
* Wave (all versions)
* Wave+ (all versions)LE931030 -
Jaguar - Set knives - 3 pieces vintage 90s knives
Year of production: 1990s
Type of production: industrial
Blade: 440A stainless steel
Country of production: Italy - Maniago
Handle: Rosewood - buffalo horn - deer - with mirror polished brass heads
Blade length: 69mm.
Blade thickness: 2.5mm.
Length closed: 82mm.
Total length: 146mm.
Weight: 70g.
Closure: Back Lock
Sheath:
Note: Jaguar is the trade name under which Maserin produced knives until the 90sJA-SET-3€110.66Out of stock -
Leatherman - Skeletool KB - folding knife
Intended use: Sports
Type of production: Industrial
Country of production: USA
Blade: 420HC stainless steel
Blade treatment: Satind
Handle: 6061-T6 aluminum
Blade length: 66mm.
Blade thickness: 2.6mm.
Length closed: 87mm.
Overall length: 151mm.
Thick when closed: 11mm.
Balancing: -
Weight: 38g.
Opening: hole on the blade
Washers: in brass
Closure: Liner Lock
Clip: stainless steel, removable, with the function of a bottle opener
Sheath: -
Packaging: Cardboard box with Leatherman logos
Note: -LE832385 -
Jaguar - machete handle with deer - Vintage knife
Year of production: 90 Years
Type of production: Industrial
Blade: 440A Stainless steel
Country of production: Italy - Maniago
Handle: Stag
Blade length: 370mm.
Blade Thickness: 4mm.
Overall length: 570mm.
Weight: 994g.
Sheath:
Notes: Jaguar is the brand name under which Maserin produced knives until the 90Ja-fisso€311.48Out of stock -
Jaguar - lockable brass with wooden insert 411 - Knife
Year of production: 90s
Type of production: Industrial
Blade: 440A Stainless steel
Country of production: Italy - Maniago
Handle: brass and wood
Blade length: 48mm.
Blade Thickness: 2.5mm.
Closed Length: 66mm.
Overall length: 110mm.
Weight: 38g.
Lock: Back Lock
Sheath:
Notes: Jaguar is the brand name under which Maserin produced knives until the 90ja-411€22.13Out of stock -
Jaguar - Pocket lockable wooden 710 - Knife
Year of production: 90s
Type of production: Industrial
Blade: 440A Stainless steel
Country of production: Italy - Maniago
Handle: Wood with polished brass heads mirrorBlade length: 40 mm.
Blade Thickness: 2mm.
Closed Length: 57mm.
Overall length: 130mm.
Weight: 32g.
Lock: Back Lock
Sheath:
Notes: Jaguar is the brand name under which Maserin produced knives until the 90ja-710€20.49Out of stock -
Jaguar - Pocket lockable wooden 708 - Knife
Year of production: 90s
Type of production: Industrial
Blade: 440A Stainless steel
Country of production: Italy - Maniago
Handle: Rosewood with polished brass heads mirrorBlade length: 40 mm.
Blade Thickness: 2mm.
Closed Length: 57mm.
Overall length: 130mm.
Weight: 32g.
Lock: Back Lock
Sheath:
Notes: Jaguar is the brand name under which Maserin produced knives until the 90ja-708€20.49Out of stock -
Jaguar - Pocket lockable wooden 709 - knife
Year of production: 90'
Type of production: Industrial
Blade: 440A Stainless steel
Country of production: Italy - Maniago
Handle: Rosewood with heads in Nickel silver polishedBlade length: 40 mm.
Blade Thickness: 2mm.
Closed Length: 57mm.
Overall length: 130mm.
Weight: 34g.
Lock: Back Lock
Sheath:
Notes: Jaguar is the brand name under which Maserin produced knives until the 90'ja-709€20.49Out of stock -
Jaguar - Chiudibile in legno con testine in alpacca - Coltello Vintage Anni '90
Anno di produzione: Anni '90
Tipo di produzione: industriale
Lama: in acciaio inox 440A
Paese di produzione: Italia - Maniago
Manicatura: Legno di palissandro con testine in Alpacca lucidato a specchio
Lunghezza lama: 73mm.
Spessore della lama: 2.5mm.
Lunghezza chiuso: 107mm.
Lunghezza totale: 180mm.
Peso: 72g.
Chiusura: Back Lock
Fodero: In nylon nero, con chiusura in Velcro
Note: Jaguar è il nome commerciale con cui Maserin produceva coltelli fino agli anni '9012572€31.97Only -99 leftOut of stock -
Jaguar - campeggio 522 - coltello
Tipo di produzione: Industriale
Produzione Lama: Italia
Lama: 420
Trattamento Lama: Satinata
Manicatura: legno
Lunghezza lama: 100mm.
Spessore lama: 2.5mm.
Lunghezza totale: 200mm.
Peso: 65g.
Chiusura: back lock
Clip: -
Confezione: -
Note: -jaguar€24.59Out of stock -
Forge de Laguiole - Philippe Starck - Jojo long legs - coltello formaggio - fuori produzione
Laguiole en Aubrac - Philippe Starck - Jojo long legs - coltello formaggio All'inizio degli anni '80, nel villaggio di Laguiole in Aubrac, l'arte della coltelleria di Laguiole era scomparsa... Nel 1987 la fabbrica Forge de Laguiole rilancia la produzione di mitici coltelli nel suo villaggio d'origine, rispettando l'eredità dell'arte della tradizione. È la rinascita di un coltello cult, referenza del design, sinonimo di qualità e arte di vivere. Ogni coltello è un pezzo unico che può richiedere diversi giorni di produzione! Un solo coltellinaio altamente qualificato realizza, in più di 40 fasi, un coltello d'eccezione, che durerà una vita. Tra tradizione e creazione, Forge de Laguiole apporta un tocco di innovazione, rivolgendosi ai più grandi designer. Questo splendido coltello da formaggio firmato Philippe Starck ha un elegante manico in bachelite nera Presentato all'esposizione universale di Siviglia nel 1992, ha permesso a Forge de Laguiole di ricevere il premio del Design Europeo.
Elegante, le sue linee inimitabili ed essenziali ne fanno un vero capolavoro d'equilibrio ed estetica. La forma del manico è stata semplicemente studiata perchè il coltello possa rimanere in equilibrio sul suo bordo. Philipe Starck, architetto e designer francese ha partecipato al progetto della Forge de Laguiole fin dall'inizio delle sue avvenure. Dopo aver ideato nel 1987 l'edificio della Forge de Laguiole ha ideato i primi negozi del marchio; così, sarà dunque anche il primo a ripensare il coltello di Laguiole. Caratteristiche:
Colore : nero Materiale : Acciaio inossidabile - Bachelite Dimensioni : Lunghezza totale: 30 cm - Lama: lunghezza 15 cm Origini: Coltello originale Laguiole interamente prodotto a Laguiole in Aveyron (più di 40 fasi successive sono necessarie alla sua realizzazione)5551S -
Forge de Laguiole - Munoz Caballero Corno con blocco lama - coltello collezione
Coltello realizzato dal famoso Virgilio Munoz Caballero. Questo artigiano è stato insignito nel 1986 del titolo di Migliore Operario Francese nella categoria dei coltelli da collezione.
Dal 1984 collabora con Forge de Laguiole realizzando pezzi d'eccezione con uno stile personale che associa precisione e tecnica alla finezza delle decorazioni e incisioni.
Lama: in acciaio inox 12C27
Manicatura: corno
Lunghezza lama: 90 mm.
Spessore della lama: 3 mm.
Lunghezza totale: 220 mm.
Peso: 108 g.
Cartelle: Acciaio Inox lucido
Testine: Acciaio Inox lucido
Chiusura: Molla di ritenzione in acciaio Inox lucido
note: uno dei pochi Laguiole con il blocco lama2891 -
Forge de Laguiole - Radica di Ginepro - coltello collezione
Destinazione d'uso: Collezione
Lama: in acciaio inox 12C27
Produzione Lama Laguiole, Francia
Manicatura: Radica
Lunghezza lama: 85mm.
Spessore della lama: 3mm.
Lunghezza chiuso: 110mm.
Lunghezza totale: 205mm.
Bilanciatura: -
Peso: 56g.
Chiusura: Molla di ritenzione
Clip: -
Fodero: -
Note: -2491 -
Forge de Laguiole - Yan Pennor collection - corian bianco - coltello
Creato dal disegnatore Yan Pennor questo coltello ha ottenuto il premio "French Grand Prize"
Lama: in acciaio inox 12C27
Manicatura: corian bianco
Lunghezza lama: 90 mm.
Spessore della lama: 3 mm.
Lunghezza totale: 205 mm.
Peso: 80 g.
Cartelle: Acciaio Inox lucido
Chiusura: Molla di ritenzione in acciaio Inox lucido
Clip: Assente
Fodero: Assente
scatola regalo2892 -
Forge de Laguiole - Yan Pennor collection - fibra di carbonio - coltello
Creato dal disegnatore Yan Pennor questo coltello ha ottenuto il premio "French Grand Prize"
Lama: in acciaio inox 12C27
Manicatura: fibre di carbonio
Lunghezza lama: 90 mm.
Spessore della lama: 3 mm.
Lunghezza totale: 205 mm.
Peso: 80 g.
Cartelle: Acciaio Inox lucido
Chiusura: Molla di ritenzione in acciaio Inox lucido
Clip: Assente
Fodero: Assente
scatola regaloserie numerata2894 -
Forge de Laguiole - Yan Pennor collection knife - corno - coltello collezione
Creato dal disegnatore Yan Pennor questo coltello ha ottenuto il premio "French Grand Prize"
Lama: in acciaio inox 12C27
Manicatura: corno
Lunghezza lama: 90 mm.
Spessore della lama: 3 mm.
Lunghezza totale: 205 mm.
Peso: 80 g.
Cartelle: Acciaio Inox lucido
Chiusura: Molla di ritenzione in acciaio Inox lucido
Clip: Assente
Fodero: Assente
scatola regaloserie numerata2893