Knives, collection knife, tactical knives, outdoor knives, pocket knives and tools
-
Leatherman - 4.5" Nylon Sheath with Pockets for Signal and Surge - 934933 - Replacement Accessories
Protect your multifunction tool with these revised nylon sheaths.
Every detail is designed to ensure the cases last a long time, are reliable and easy to use. High-quality metal rivet snap allows for a secure closure that keeps the tool safe.
It is made of durable stretch ballistic nylon with reinforced seams for better accessibility and fit. Extra pockets in this nylon sheath are made to carry a bit kit, a bit extender, and a small flashlight or marker. It fits belts up to 4.5 cm wide. The overall fit may vary depending on the accessories carried.
COMPATIBILITY.
* Free P2
* Free P4
* Signal
* Super Tool
* Surge
INTERNAL DIMENSIONS
12 x 3.8 x 2 cmLE934933 -
Kasumi Japan - Sharpening stone - Grain 240/1000 - 80001 - knives accessories
The Kasumi 80001 combination whetstone with rough (240) and medium (1000) grit.
If your knife edge is in poor condition, start sharpening with the rough # 240 grit of the whetstone.
If your knife is in average condition, start with the # 1000 medium grit of the whetstone.
These two grits will keep your knives sharp enough for normal home use.
The whetstone comes with a hard rubber base for use when sharpening.
There is also a small abrasive stone to be used to grind the surface of the stone.
Dimensions:
length 175 x width 60 x height 25 mm - Weight: 635g.
Quality level: very highKJ80001 -
Leatherman - Thread Cutter Replacement Kit - 930350 - Accessories
Wire cutter replacement kit includes a set of replacement wire cutter inserts, two screws and a #8 Torx screwdriver for installation. Wire cutter inserts are made of premium stainless steel.
COMPATIBLE WITH:
* MUT®
* OHT
* Charge®+
* Charge®+ Forest Camo
* Charge®+ TTi
* Rebar
* Heritage Rebar
* Super Tool® 300+
* Heritage Super Tool 300
* Surge
* Surge® black and silver
* Wave®+
* Wave® black and silver
* Heritage Wave+
* Heritage Charge+
* FREE™ P2
* FREE™ P4
* Signal
* Signal® Topo
* Charge®+ G10
* 2H WaveLE930350 -
Leatherman - MOLLE Black XL sheath - LE930371 - Accessories
Compatible with the following Leatherman pliers:
* MUT®
* MUT® EOD
* Super Tool® 300
* Super Tool® 300 EOD
* Original Surge®
* Surge®
* Heritage Super Tool® 300
Heavy and robust nylon lining with Velcro closure and belt loop for both horizontal and vertical ports. Equipped with standard connections of the M.O.L.L.E. typeLE930366 -
Leatherman - Fodero MOLLE Black 4" - 931005 - Accessori
Compatibile con le seguenti pinze Leatherman:
* Sidekick
* Wingman
* Blast
* Kick
* Fuse
* Crunch
* Wave
* Charge
Fodero in pesante e robusto Nylon con chiusura in velcro e passante da cintura sia per porto orizzontale che per porto verticale. Dotato di attacchi standard di tipo M.O.L.L.E.LE931005 -
Piscitelli - Ciociaro horn tip hammered blade - CIO01/2 - handmade knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
- Type: Previously Purchased
- Condition: like new
- Available in commerce: NO - the craftsman stopped producing knives a few years ago
- Sharpening: Original
- Marks on blade: NO
- Marks on handle: NO
- Packaging: YES
- Checked and Certified by our internal laboratory
It has a slender blade and a curved handle. It originates from very ancient models. It was a very common knife among the shepherds of southern central Italy. The handle is made of full horn.
Features:
- steel: AISI 420
- hardness: 54/56 HRC
- total length: 20.5cm
- blade length: 9cm
- blade thickness: 2mm
- weight: 60gr
- fittings: horn tip
- notes: handcrafted - accompanied by a warranty certificate
Piscitelli has been making knives in Frosolone for three generations, a small town in the Molise hinterland known for its knife-making. The Art, Style, and Tradition allow us to give importance and originality to our creations handed down from generation to generation.
Giovanni Piscitelli, born in Frosolone (IS). The passion for collection and hunting knives I inherited from my father (master craftsman) from whom I also inherited the most sophisticated techniques. My knives are unique pieces, strictly handcrafted.
When producing a knife, there are many elements that make a difference. In addition to a difference in value in the choice of materials, it is the labor required to perform certain operations, closely connected to the construction complexity that makes the knife more valuable. The reasons that justify the differences can also lie in the processing of the blade, or of the handle (elements that it is good to remember are modeled and finished exclusively by hand).
CIO01/2€131.15Only 1 left -
Piscitelli - Hunting horn hammered blade - CCC03/2 - artisanal knife
Piscitelli - Hunt horn hammered blade - CCC03/2 - handmade knife KNIFE WITHDRAWN FROM PRIVATE COLLECTION
- Type: Previously Purchased
- Condition: like new
- Available in commerce: NO the craftsman stopped producing knives a few years ago
- Sharpening: Original
- Marks on blade: NO
- Marks on handle: NO
- Packaging: YES
- Checked and Certified by our internal laboratory
Typical knife for the hunter. It is a robust and concrete knife. The tip is slightly lowered to work in cavities, and the blade has a deep curve for skinning.
Features:
- steel: AISI 420
- hardness: 54/56 HRC
- total length: 18cm
- blade length: 7.5cm
- blade thickness: 2mm
- weight: 68gr
- fittings: horn
- notes: handcrafted
- accompanied by a warranty certificate
Piscitelli has been making knives in Frosolone for three generations, a small town in the Molise hinterland known for its knife-making. The Art, Style and Tradition allow us to give importance and originality to our creations handed down from generation to generation.
Giovanni Piscitelli, born in Frosolone (IS). The passion for collection and hunting knives I inherited from my father (master craftsman) from whom I also inherited the most sophisticated techniques. My knives are unique pieces, strictly handcrafted.
When producing a knife, there are many elements that make a difference. In addition to a difference in value in the choice of materials, it is the labor required to perform certain operations, closely connected to the construction complexity that makes the knife more valuable. The reasons that justify the differences can also lie in the processing of the blade, or of the handle (elements that it is good to remember are modeled and finished exclusively by hand).
CCC03/2€118.85Only 1 left -
Leatherman - Ainsworth 4" Premium Leather Sheath - 934935 - Accessories
The Ainsworth sheath is made in Slovakia with premium full-grain leather, tanned with plant extracts and offers premium protection for your tool.
It is the best we have created to date. The Ainsworth leather sheath is made from drum-dyed, full-grain, vegetable-tanned cowhide. This treatment makes the leather fine and able to improve with time. The snap, customized button keeps your tool safe over years of use.
This sheath is premium protection for your Leatherman and is covered by our two-year warranty. It fits belts up to 4.5 cm wide. Internal capacity: 10.2 x 3.8 x 2 cm
Compatible with the following Leatherman pliers:
* Free P2
* Free P4
* Charge+
* Wave+
* Wingman
* Sidekick
* Rev
* Rebar
* SkeletoolLE934935 -
Kasumi Japan - Sharpening stone - Grain 3000/8000 - 80002 - knives accessories
Kasumi 80002 combination sharpening stone with fine (3000) and superfine (8000) grit. Excellent for giving your knives a razor sharpening.
The # 8000 grit was developed specifically for knives and knives made of special steels.
# 8000 grit is nearly the same grain and quality as a natural whetstone used to sharpen Japanese samurai swords.
With the right technique and experience, the # 3000 / # 8000 whetstone combination will give your knives a beautiful mirror edge, just like the edge of a samurai sword.
The whetstone comes with a hard rubber base for use when sharpening.
There is also a small abrasive stone to be used to grind the surface of the stone.
Dimensions:
length 175 x width 60 x height 25 mm - Weight: 635g.
Quality level: very highKJ80002 -
Leatherman - 3-Way Magnetic Ratchet Screwdriver - 931030 - Accessories
Magnetic bit holder that allows secure positioning of both Leatherman flat and standard 63mm bits.
Compact 3-way ratchet system that allows continuous rotation in one direction, avoiding tool repositioning. The 3-way allows for a forward, reverse and locked setting.
SPECIFICATIONS
Length: 8.28 cm
Weight: 35.7 gCOMPATIBILITY:
* MUT (all versions)
* Charge (all versions)
* Charge+ (all versions)
* Signal (all versions)
* Skeletool (all versions)
* Super Tool 300M
* Surge (all versions)
* Wave (all versions)
* Wave+ (all versions)LE931030 -
Leatherman - Skeletool KB - folding knife
Intended use: Sports
Type of production: Industrial
Country of production: USA
Blade: 420HC stainless steel
Blade treatment: Satind
Handle: 6061-T6 aluminum
Blade length: 66mm.
Blade thickness: 2.6mm.
Length closed: 87mm.
Overall length: 151mm.
Thick when closed: 11mm.
Balancing: -
Weight: 38g.
Opening: hole on the blade
Washers: in brass
Closure: Liner Lock
Clip: stainless steel, removable, with the function of a bottle opener
Sheath: -
Packaging: Cardboard box with Leatherman logos
Note: -LE832385 -
Ibberson - Sheffield Classic Amber Bone - vintage knife
Vintage knife from the early 80's completely new, with original box and manual instructions, manufactured in Sheffield from Egginton Group of Companies, owner of the historic brand Ibberson
Intended Use: sport / collection
Type of production: Semi-Handmade
Production Lama: UK
Blade: Stainless steel
Blade treatment: mirror polished
Handle: Brass and amber deer
Blade length: 68mm.
Blade thickness: 2.5mm.
Closed Length: 98mm.
Overall length: 164mm.
Thick when closed: 14mm
Balancing: -
Weight: 89g.
Closure: back lock
Packaging: cardboard box and user manual Ibberson
Notes: Unique specimen at our disposal. Knife over 30 years; Again, perfect, with a beautiful patina Atmospheric across the handle brass. If you prefer a polished look and shiny, just wipe the brass to make it shine.12465€72.95Out of stock