Knives, collection knife, tactical knives, outdoor knives, pocket knives and tools
-
Spyderco - Pattada - N690Co & G10 - PRIVATE COLLECTION - C204GP - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased.
* Condition: In very good condition
* Commercially available: Discontinued
* Sharpening: Factory sharpened
* Marks on blade: A couple of small marks above the opening hole, right side blade (see photo)
* Marks on handle: None
* Box: Present
* Scabbard: /
* Manuals, Certificates and Warranties: Present
* Checked and Certified by our in-house laboratory
Intended Use: Sporting / CollectionType of Production: Industrial
Country of Production: Italy
Blade: Stainless steel N690Co
Blade finish: Satin finish
Handle: Stainless steel and G10
Blade length: 100mm.
Blade thickness: 3.5mm.
Length closed: 121mm.
Total length: 221mm.
Weight: 119g.
Closure: Liner Lock
Clip: stainless steel, flush, removable and reversible
Packaging: cardboard box with Spyderco logos
Notes: previously purchased knife, from private collectionC204GP-CP -
Spyderco - Endura 4 Stainless Steel Plain Edge - C10P - PRIVATE COLLECTION - knife
KNIFE RETIRED FROM PRIVATE COLLECTION
Type: Previously purchased
Condition: in like-new condition
Commercial availability: Available
Sharpening: Factory
Blade marks: -
Handle marks: -
Box: Present
Sheath: -
Manuals, Certificates, and Guarantees: Present
Checked and Certified by our in-house laboratory
Intended Use: SportingProduction Type: Industrial
Blade: VG-10 stainless steel
Blade Treatment: -
Blade Production: Japan
Handle: Stainless Steel
Blade Length: 95mm.
Blade Thickness: 3mm.
Closed Length: 125mm.
Total Length: 220mm.
Balance: -
Weight: 161g.
Locking Mechanism: Back Lock
Clip: Removable, multiposition, stainless steel
Sheath: -
Notes: -AP-C10P -
Ka-Bar BK&T - Becker Harpoon Black Survival Knife - BK18BK - knife
Intended Use: Bushcraft / Outdoor
Production Type: Industrial
Country of Origin: USA
Blade: 1095 steel at 56/58HRC
Blade Finish: Black Coating
Handle: Zytel
Blade Length: 110mm.
Blade Thickness: 4.5mm.
Overall Length: 235mm.
Weight: 195g.
Sheath: Nylon and Celcon in Black
Packaging: Cardboard box with KA-Bar logos
Notes: Design by Ethan BeckerColtelleria Collini in Busto Arsizio is the official distributor for the KA-BAR brand in Italy.
KB-BK18BK -
Ka-Bar - USMC Fighting Knife 125th Anniversary Special Edition - 9226 - knife
The USMC KA-BAR is considered one of the most famous knives in the world. It was originally designed for U.S. troops in World War II and since then its effectiveness has been universally recognized and employed in many other military scenarios. With this special edition, Ka-Bar celebrates the company's 125th anniversary.
Intended Use: Tactical/Military
Blade: 1095 carbon steel 56/58HRC
Handle: leather rings
Blade length: 180mm.
Blade thickness: 4mm.
Total length: 305mm.
Balance: backward
Weight: 305g.
Sheath: leather
Notes: special edition to celebrate the company's 125th anniversaryKB-9226 -
Ka-Bar - Mini Dozier Folding Hunter knife 4072ZG - Zombie Green - knife
Intended use: tactical
Blade: AUS 8A stainless steel
Handle: Zytel
Blade length: 60mm.
Blade thickness: 2.5mm.
Closed length: 87mm.
Total length: 147mm.
Balancing:
Weight: 22g.
Closure: back lock
Opening: -
Clip: in steel
Design: by Bob DozierProduction: Taiwan
The Collini Cutlery in Busto Arsizio is the official distributor for Italy of the KA-BAR brand
KB-4072ZG -
Ka-Bar - USSF Space-Bar Plain Edge - 1313SF - knife
The KA-BAR 1313SF Space-Bar Knife USSF is the new legendary fixed knife produced for the United States Space Force. A unit of the United States Army working in space, founded in 2019. No, this is not the pilot episode of a new TV series, this is real!
This 131SF version is acaracterized by a light blue Kraton handle. A rubber-like material that offers great grip regardless of the circumstances. The 1313SF comes with a solid thermoplastic scabbard. Ready to go to Infinity and beyond!
Intended use: military / collectionProduction type: industrial
Country of manufacture: USA
Blade: carbon steel 1095 56/58HRC
Blade finish: powder coated
Handle: Kraton G
Blade length: 180mm.
Blade thickness: 4mm.
Total length: 300mm.
Balance: set back 1.5cm.
Weight: 300g.
Sheath: thermoplastic, belt.
Notes: knife made for USSFKB-1313SF -
Spyderco - Police - Half Serrated - C07PS - knife
Intended Use: Sporting
Production type: Industrial
Country of Production: Japan
Blade: Stainless steel VG-10
Blade Treatment: Satin finish
Handle: Satin-finished stainless steel
Blade length: 104mm.
Blade thickness: 3mm.
Length closed: 135mm.
Total length: 240mm.
Thickness when closed: 8mm
Weight: 162g.
Closure: Back Lock
Clip: multi-position, removable, stainless steel
Package: cardboard box with Spyderco logos
Notes: -C07PS -
Ka-Bar BK&T - Becker Harpoon Survival knife BK18 - knife
Intended use: Bushcraft / Outdoor
Type of production: Industrial
Blade production: USA
Blade: 1095 to 56 / 58HRC steel
Blade treatment: Desert Traction Coating
Handle: Zytel
Blade length: 110mm.
Blade thickness: 4.5mm.
Length closed: -
Total length: 235mm.
Thick when closed: -
Balancing: -
Weight: 195g.
Closing: -
Clip: -
Sheath: Nylon and Celcon coyote color
Packaging: Cardboard box with KA-Bar logos
Notes: Design by Ethan BeckerCollini Cutlery in Busto Arsizio is the official distributor for Italy of the KA-BAR brand
KB-BK18 -
Ka-Bar - USMC Commemorative Presentation Grade Fighting Knife - 1215 - knife
The USMC KA-BAR is considered one of the most famous knives in the world. It was originally designed for United States troops in the Second World War and its effectiveness has since been universally recognized and used in many other military scenarios.
This elegant version of the traditional Ka-bar 1217 is characterized by the presence of the gold-plated brass caseback and guard. This version is perfect as a retirement or graduation gift, or simply as an object to be included in your knife collection.
Intended use: Tactical / MilitaryBlade: 1095 56 / 58HRC carbon steel
Handle: premium leather rings
Blade length: 180mm.
Blade thickness: 4mm.
Length closed: -mm.
Total length: 305mm.
Balancing: backward - 1 cm. from the lower guard branch
Weight: 278g.
Closing: -
Clip: -
Sheath: leather
Note: -KB-1215 -
Ka-Bar - Foliage Green Fighting knife - 5012 - Kydex Sheath - knife
Intended use: tactical / military
Type of production: industrial
Provenance Lama: USA
Blade: 1095 56 / 58HRC steel
Blade treatment: Teflon coating
Handle: Kraton G
Blade length: 180mm.
Blade thickness: 4mm.
Length closed: -
Total length: 300mm.
Balancing: set back to 1.5cm
Weight: 300g.
Closing: -
Sheath: in kydex
Note: -KB-5012 -
Ka-Bar - USMC Black short knife - 02-1258 - Kydex Sheath - knife
Intended use: Tactical / Military / Collection
Blade: 1095 56 / 58HRC carbon steel
Handle: kraton
Blade length: 135mm. partially serrated
Blade thickness: 3.5mm.
Length closed: -mm.
Total length: 240mm.
Balancing: set back - 1 cm. from the lower guard branch
Weight: 180g.
Closing: -
Clip: -
Sheath: in leather
Note: -
Send feedback
History
Saved
CommunityKB-1258 -
Ka-Bar - USMC 9169 Commemorative Afghanistan Fighting Knife - knife
The commemorative edition of the knife of the United States Marine Corps Enduring Freedom Afghanistan. Knife dedicated to those brave men and women who served during the conflict in Afghanistan.
Intended use: Tactical / Military
Production: U.S.A.
Blade: 1095 56 / 58HRC carbon steel
Handle: leather rings
Blade length: 180mm.
Blade thickness: 4mm.
Length closed: -mm.
Total length: 305mm.
Balancing: set back - 1 cm. from the lower guard branch
Weight: 305g.
Closing: -
Clip: -
Sheath: in leather
Note: -KB-9169 -
Spyderco - Cat SC129GP - knife
Spyderco - Cat SC129GP - knife
Intended Use: Sport / EDC
Type of production: Industrial
Production Lama: Taiwan
Blade: stainless steel 440C
Treatment Lama: -
Handle: G10
Blade length: 60mm.
Blade thickness: 2.5mm.
Closed Length: 90mm.
Overall length: 150mm.
Thick when closed: 9mm.
Balancing: -
Weight: 72g.
Lock: Liner Lock
Clip: yes
Sheath: -
Packaging: cardboard box with logos Spyderco
Notes: -SC129GP -
Spyderco - Manbug Lightweight - MBK - knife
Intended Use: Sport / EDC
Type of production: Industrial
Blade Production: Japan
Blade: Stainless steel VG-10
Treatment Blade: -
Handle: FRN
Blade length: 49mm.
Blade thickness: 2.5mm.
Closed Length: 64mm.
Overall length: 113mm.
Thickness when folded: 8mm.
Balancing: -
Weight: 19g.
Closure: Back Lock
Clip: -
Sheath: -
Packaging: cardboard box with logos Spyderco
Notes: -MBKP -
Ka-Bar BK&T - Becker Campanion BK2 - knife
Intended Use: Hiking / Heavy Utility
Type of production: Industrial
Production Lama USA
Blade: Stainless 1095 56/58HRC
Treatment Blade: Black Traction Coating
Handle: Zytel
Blade length: 135mm.
Blade thickness: 6.5mm.
Length closed: -
Overall length: 267mm.
Thick when closed: -
Balancing: -
Weight: 454g.
Closure: -
Clip: -
Sheath: ABS and Nylon
Packaging: Cardboard box with logos KA-Bar
Notes: Design by Ethan BeckerKB-BK2 -
Ka-Bar - Black Fighting Knife - 02-1212 - Leather Sheath - knife
Intended use: tactical / military / collection
Type of production: industrial
Provenance Lama: USA
Blade: 1095 56 / 58HRC steel
Blade treatment: Teflon coating
Handle: Kraton G
Blade length: 180mm.
Blade thickness: 4mm.
Length closed: -
Total length: 300mm.
Balancing: set back to 1.5cm
Weight: 300g. (406g. With scabbard)
Closing: -
Sheath: in leather
Note: -KB-1212 -
Ka-Bar BK & T - Becker Short Drop Point BKR16 - knife
Ka-Bar BK & T - Becker Short Drop Point BKR16 - knife
Ka-Bar from the experience and ideas of Ethan Becker, comes this line of knives voted to extreme use in the field. The blade 1095 carbon has been specially chosen for its superiority in holding the wire and the ergonomic handle Grivory, a thermoplastic polymer with more than 60% of glass fiber, ensures a good grip and absolute wear resistance and durability .
Steel: 1095 56/58 HRC
Length of the blade: 105 mm.
Blade Thickness: 4 mm.
Overall length: 230 mm.
Weight: 160 g.Sheath: Cordura desert
Notes: extra pair of grips for the handle color desertKB-BK16 -
Ka-Bar - Big Brother knife Black - KB2211 - knives
Intended use: Tactical / Military
Blade: 1095 56 / 58HRC carbon steel
Handle: kraton
Blade length: 236mm.
Blade thickness: 4mm.
Total length: 360mm.
Balancing: set back - 2 cm. from the lower guard branch
Weight: 412g.
Closing: -
Clip: -
Sheath: in kydex
Note: -
Send feedback
History
SavedKB-2211 -
Ka-Bar - BK7 - Becker Combat Utility - knife
The KA-BAR BK7 is a rugged field knife designed to meet the toughest outdoor challenges.
The blade shape is a variation of the classic "clip point," featuring a pronounced curve on the back that converges toward the sharp point. This design allows for easy precision work and offers enough extension for heavier tasks such as woodworking.
The BK7's handle is made of Ultramid, a reinforced plastic material that provides a secure and comfortable grip even in wet or sweaty conditions. The ergonomics of the handle are designed to provide optimal control during use and reduce hand fatigue during prolonged work.
Intended Use: Hiking / Heavy Utility
Production type: Industrial
Country of manufacture: USA
Blade: 1095 steel at 56/58HRC
Blade Finish: Black Traction Coating
Handle: Ultramid
Blade Length: 180mm.
Blade thickness: 4.5mm.
Total length: 325mm.
Balance: advanced
Weight: 475g.
Sheath: Nylon, thigh-high, MOLLE compatible, with rigid ABS insert and external pocket to hold other tools or sharpeners
Packaging: cardboard box with KA-Bar logos
Notes: Design by Ethan BeckerKB-BK7 -
Ka-Bar - Black Fighting Knife - 02-1214 - Kydex Sheath - knife
Intended use: tactical / military / collection
Type of production: industrial
Provenance Lama: USA
Blade: 1095 56 / 58HRC steel
Blade treatment: Teflon coating
Handle: Kraton G
Blade length: 180mm.
Blade thickness: 4mm.
Length closed: -
Total length: 300mm.
Balancing: set back to 1.5cm
Weight: 300g.
Closing: -
Sheath: in kydex
Note: -
Send feedback
History
Saved
CommunityKB-1214 -
Ka-Bar - D2 Extreme knife - 02-1282 - knife
Intended use: Military
Type of production: industrial
Blade: in steel D2
Blade treatment: teflon coating
Lama production: USA
Handle: Kraton
Blade length: 178mm.
Blade thickness: 4mm.
Length closed: -
Total length: 305mm.
Balancing: -
Weight: 350g.
Closure: -
Clip: -
Sheath: in kydex
Note: -KB-1282 -
Ka-Bar - Mark I - Kraton- 2221 - knife
Purpose: Sport / Tactical
Type of production: Industrial
Country of Origin: USA
Blade: carbon steel 1095 56 / 58HRC
Blade treatment: Teflonatura
Handle: Kraton
Blade Length: 130mm.
Blade thickness: 3.5mm.
Total Length: 235mm.
Weight: 250g.
Sheath: in FRN (fiberglass reinforced nylon)
Packing: Cardboard box with Ka-Bar logos
Notes: -KB-2221 -
Ka-Bar - USMC Iraqi Freedom - K-9128 - knife
A commemorative version of the "Iraqi Freedom" military operations that took place during the second Gulf war between 2003 and 2004, aimed at freeing the Iraqi territory from the grip of the dictator Saddam Hussein.
Destination of use: collection
Country of production: USA
Blade: 1095 56 / 58HRC carbon steel
Surface treatment: Teflon coating with laser engraving
Grip: leather rings
Blade length: 180mm.
Blade thickness: 4mm.
Total length: 305mm.
Balancing: set back
Weight: 305g.
Sheath: leather, with USMC logos
Notes: Limited and commemorative editionKB-9128 -
Ka-Bar - USMC Short - 02-1252 - knife
Ka-Bar - USMC Short - 02-1252 - knife
Intended use: Tactical / Military
Blade: 1095 carbon steel 56 / 58HRC
Handle: Leather rings
Blade length: 135mm. partially serrated
Blade Thickness: 3.5mm.
closed length: -mm.
Overall length: 240mm.
Balancing: backward - 1 cm. the branch of the lower guard
Weight: 182g.
Closed: -
Clip: -
Sheath: Leather
Notes: -KB-1252 -
Ka-Bar, USMC Fighting Knife, 1217, ka bar knife
Intended Use: Tactical / Military
Blade: 1095 carbon steel 56/58HRC
Handle material: leather rings
Blade length: 180mm.
Blade Thickness: 4mm.
Length closed:-mm.
Total length: 305mm.
Balance: back - 1 cm. the branch of lower guard
Weight: 305g.
Closing: -
Clip: -
Sheath: Leather
Notes: -KB-1217 -
Spyderco - Delica 4 SpyderEdge - C11SBK - knife
Intended use: Sporting
Type of manufacture: industrial
Blade: Stainless steel VG-10 58HRC
Blade treatment: -
Blade production: Japan
Handle: Black FRN with embedded stainless steel liners
Blade length: 75mm.
Blade thickness: 2.5mm.
Length closed: 107mm.
Total length: 180mm.
Balance: -
Weight: 72g.
Closure: Back Lock
Clip: Removable, multi-position, stainless steel
Sheath: -
Notes: -C11SBK -
Spyderco - Ladybug 3 - LBKS3 - knife
Intended use: Sporting/EDC
Production type: Industrial
Blade production: Japan
Blade: VG-10 stainless steel
Blade treatment: -
Handle: FRN
Blade length: 49mm.
Blade thickness: 2mm.
Length closed: 62mm.
Total length: 111mm.
Thickness when closed: 8mm.
Balance: -
Weight: 14g.
Closure: Back Lock
Clip: -
Sheath: -
Packaging: cardboard case with Spyderco logos
Notes: -LBKS3 -
Spyderco - Military Black Plain - C36GPBK - knife
Intended Use: Sporting/Tactical
Production type: Industrial
Blade production: U.S.A.
Blade: Stainless steel CPM 30SV
Blade Treatment: BodyCote black
Handle: G10
Blade length: 102mm.
Blade thickness: 3.3mm.
Length closed 140mm.
Total length: 241mm.
Thickness when closed: 15mm.
Balance: -
Weight: 122g.
Closure: Liner Lock
Clip: Removable, stainless steel
Sheath: -
Packaging: cardboard box with Spyderco logos
Notes: -C36GPBK -
Spyderco - Military Plain knife - C36GPE knife
Intended use: Sport / Tactical
Type of production: Industrial
Blade Production: U.S.A.
Blade: CPM 30SV stainless steel
Blade treatment: -
Handle: G10
Blade length: 102mm.
Blade thickness: 3.3mm.
Closed length 140mm.
Total length: 241mm.
Closed thickness: 15mm.
Balancing: -
Weight: 122g.
Closure: Liner Lock
Clip: removable, in stainless steel
Scabbard: -
Packaging: cardboard box with Spyderco logos
Note: -3720PS -
Ka-Bar - 6417 Red Spacer knife - 1095 steel - Special Edition - coltello
Il Red Spacer KA-BAR è probabilmente il coltello KA-BAR più collezionabile realizzato durante la seconda guerra mondiale. Il distintivo distanziatore rosso presente sotto la guardia ha attirato l'attenzione dei collezionisti per decenni. Sebbene gli originali siano rari e costosi, il laboratorio State & Union di KA-BAR - che si occupa delle realizzazioni custom - ha realizzato un piccolo lotto di questo iconico coltello.
Le rondelle in pelle sono modellate a mano per creare un aspetto invecchiato. Il fondello e la guardia sono lavorate artigianalmente per replicare le forme e le dimensioni dell'originale.
Ogni distanziatore rosso è fatto a mano per essere leggermente più lungo dell'attuale distanziatore utilizzato sui coltelli da combattimento/utilità KA-BAR. La lama viene sabbiata, quindi trattata a freddo.
Il fodero subisce un processo di invecchiamento per scurire la pelle e far corrispondere il colore del fodero originale.
Destinazione d'uso: Tattico/Militare
Lama: in acciaio al carbonio 1095 56/58HRC
Manicatura: anelli di cuoio
Lunghezza lama: 180mm.
Spessore della lama: 4mm.
Lunghezza chiuso: -mm.
Lunghezza totale: 290mm.
Bilanciatura: arretrata - 1 cm. dal ramo di guardia inferiore
Peso: 305g.
Chiusura: -
Clip: -
Fodero: in cuoio
Note: -La Coltelleria Collini di Busto Arsizio è distributore ufficiale per l'Italia del marchio KA-BAR
KB-6417 -
Spyderco - Military - Natural G-10 & CPM-M4 Black DLC - Exclusive Edition - C36GM4BK - Knife
Intended Use: Collection / Tactical
Production Type: Industrial
Country of Production: USA
Blade: Carbon steel CPM-M4
Blade Finish: Black DLC
Handle: Natural G-10
Blade Length: 102mm.
Blade thickness: 3.3mm.
Length closed 140mm.
Total lenght: 241mm.
Thickness when closed: 15mm.
Weight: 122g.
Closure: Liner Lock
Clip: removable, stainless steel
Packaging: cardboard box with Spyderco logos
Notes: limited edition made in February 2019 exclusively for a US retailer - discontinued, sold out and unobtainable - Direct link to manufacturer's datasheet: https://www.spyderco.com/catalog/details/C36GM4BK/1210C36GM4BK -
Ka-Bar - Modified Tanto Fixed Blade Knife - 1266 - Kydex Sheath - knife
Intended use: Tactical / Military / Collection
Intended use: Tactical / Military / Collection
Blade: 1095 56 / 58HRC carbon steel
Handle: kraton
Blade length: 20.3 mm.
Blade thickness: 4.2 mm.
Total length: 32.4 mm.
Balancing: backward
Weight: 330g.
Sheath: in kydex
Packaging: cardboard box with Ka-Bar logosCollini Cutlery in Busto Arsizio is the official distributor for Italy of the KA-BAR brand
KB-1266 -
Ka-Bar - U.S. ARMY - Fighting Knife - 1219 - knife
Similar to the most famous and best-selling model 1217 USMC, the model 1219 differs in the use of the U.S. LOGO. ARMY engraved on the blade and on the sheath and with the partially serrated blade.
The USMC KA-BAR is considered one of the most famous knives in the world. It was originally designed for United States troops in the Second World War and its effectiveness has since been universally recognized and used in many other military scenarios.
Intended use: Tactical / Military
Blade: 1095 56 / 58HRC carbon steel
Handle: leather rings
Blade length: 180mm.
Blade thickness: 4mm.
Length closed: -mm.
Total length: 305mm.
Balancing: backward - 1 cm. from the lower guard branch
Weight: 305g.
Closing: -
Clip: -
Sheath: leather
Note: -KB-1219 -
Ka-Bar - Bowie Knife 1236 leather sheath - knife
Intended use: sports
Blade: 4116 stainless steel 57 hrc
Handle: leather rings
Blade length: 175mm.
Blade thickness: 4mm.
Length closed: -mm.
Total length: 295 mm.
Balancing: set back - 1 cm. from the lower guard branch
Weight: 200g.
Closing: -
Clip: -
Sheath: in leather
Note: -KB-1236 -
Ka-Bar - USMC 9191 Commemorative 120th Anniversary - Fighting Knife - knife
From KA-BAR regarding the special engraved logo: The engraved logo features the historical "The Union" logo from the early 1900s, a bear, and the years marking 120 years - 1898 and 2018.
The significance of the bear is in the KA-BAR name itself. An Alaskan hunter was attacked by a Kodiak bear, but successfully defended himself using his Union Cutlery knife. The hunter was so thankful that he sent a letter describing the ordeal with "K a Bar" (Kill a Bear) as well as sending in the bear fur. The officers of Union Cutlery decided to adopt KA-BAR as a trademark in 1924.Intended use: Tactical / Military
Production: U.S.A.
Blade: 1095 56 / 58HRC carbon steel
Handle: leather rings
Blade length: 180mm.
Blade thickness: 4mm.
Length closed: -mm.
Total length: 305mm.
Balancing: set back - 1 cm. from the lower guard branch
Weight: 305g.
Closing: -
Clip: -
Sheath: in leather
Note: -KB-9191 -
Ka-Bar - John Ek Commando Knife Model 5 - EK45 - knife
Target: Tactical / Military
Blade: carbon steel 1095 56 / 58HRC
Country of Origin: USA
Finishing: Teflonatura
Manicure: FRN (fiberglass reinforced nylon)
Blade length: 174mm.
Blade thickness: 4mm.
Total length: 328mm.
Balance: backward - 1 cm. from the lower guard branch
Weight: 300g.
Sheath: in Celcon (ABS)KB-EK45 -
Ka-Bar - Dog's Head Utility Knife - 1317 - knife
Intended use: Tactical / Utility
Blade: 1095 carbon steel 56 / 58HRC
Country of Origin: USA
Finish: Teflon coating
Handle: Leather rings
Blade length: 180mm.
Blade Thickness: 4mm.
Overall length: 305mm.
Balancing: backward - 1 cm. the branch of the lower guard
Weight: 305g.
Sheath: LeatherKB-1317 -
Spyderco - Military - Dark Blue CPM-S110V - C36GDBL - knife
Intended use: Sports / Tactical
Type of production: Industrial
Country of Origin: U.S.A.
Blade: stainless steel CPM S110V
Handle: G10
Blade length: 102mm.
Blade thickness: 3.7mm.
Length closed 140mm.
Overall length: 242mm.
Thick when closed: 15mm.
Weight: 122g.
Lock: Liner Lock
Clip: removable, stainless steel
Packaging: cardboard box with Spyderco logos12639 -
Spyderco - Ark H1 Neck Knife - FB35PBK - knife
Intended use: EDC / Neck Knife
Type of production: Industrial
Production Country: Japan
Blade: Stainless Steel H1
Blade treatment: Satin finish
Handle: FRN
Blade length: 65mm.
Blade thickness: 2 mm.
Overall length: 126mm.
Weight: 26g.
Sheath: Boltaron (plastic) with steel chain to wear around my neck
Packaging: cardboard box with Spyderco logos
Notes: Design by John Shirley and Sam Owens12612 -
Ka-Bar - USMC Vietnam Military Knife K-9140 - Knife
Ka-Bar - USMC Vietnam Military Knife K-9140 - Knife
Intended Use: collectionBlade: 1095 carbon steel 56 / 58HRC
Handle: Leather rings
Blade length: 180mm.
Blade Thickness: 4mm.
closed length: -mm.
Overall length: 305mm.
Balancing: backward - 1 cm. the branch of the lower guard
Weight: 305g.
Closed: -
Clip: -
Sheath: Leather
Notes: Limited EditionKB-9140 -
Spyderco - Manbug ZPD-189 - MGRE - knife
Intended Use: Sport / EDC
Type of production: Industrial
Blade Production: Japan
Blade: stainless steel ZDP-189 67HRC
Blade treatment: -
Handle: FRN British Racing Green
Blade length: 49mm.
Blade thickness: 2.5mm.
Closed Length: 64mm.
Overall length: 113mm.
Thick when closed: 8mm.
Balancing: -
Weight: 20g.
Locking system: Back Lock
Clip: -
Sheath: -
Packaging: cardboard box with logos Spyderco
Notes: -12246 -
Ka-Bar - USMC Never Forget - September 11, 2001 - 02-9128 - knife
Ka-Bar - USMC Never Forget - September 11, 2001 - 02-9128 - knife
Intended use: collection
Blade: carbon steel 1095 56/58HRC
Handle material: leather rings
Blade length: 180mm.
Blade Thickness: 4mm.
Length closed:-mm.
Overall length: 305mm.
Balancing: backward - 1 cm. the branch of the lower guard
Weight: 305g.
Closure: -
Clip: -
Sheath: Leather
Notes: Limited Edition9164 -
Spyderco - Delica 4 Madreperla e Marmo Picasso by SantaFe Stoneworks - C11S
Destinazione d'uso: Collezione
Tipo di produzione: industriale (lama) ed artigianale (impugnatura)
Lama: in acciaio inox VG-10 58HRC
Trattamento Lama: -
Produzione Lama: Japan
Manicatura: interamente realizzata a mano da SantaFe Stoneworks, in Marmo Picasso e Madreperla
Lunghezza lama: 75mm.
Spessore della lama: 2.5mm.
Lunghezza chiuso: 107mm.
Lunghezza totale: 180mm.
Bilanciatura: -
Peso: 145g.
Chiusura: Back Lock
Clip: amovibile, in acciaio inox
Fodero: -
Note: impugnatura artigianale in pietra dura realizzata con la tecnica del mosaico10847 -
Ka-Bar BK&T - Becker Crewman BK10 knife - knife
Ka-Bar BK & T - Becker Crewman BKR10 - knife
Ka-Bar from the experience and ideas of Ethan Becker, comes this line of knives voted to extreme use in the field. The blade 1095 carbon has been specially chosen for its superiority in holding the wire and the ergonomic handle Grivory, a thermoplastic polymer with more than 60% of glass fiber, ensures a good grip and absolute wear resistance and durability .
Steel: 1095 56/58 HRC
Length of the blade: 135 mm.
Blade Thickness: 5 mm.
Overall length: 280 mm.
Weight: 330 g.KB-BK10 -
Spyderco - Endura Stainless Steel Plain Edge - C10P - knife
Intended use: Sport
Type of production: industrial
Blade: stainless steel VG-10
Treatment Lama: -
Blade Production: Japan
Handle: Stainless Steel
Blade length: 95mm.
Blade Thickness: 3mm.
Closed Length: 125mm.
Overall Length: 220mm.
Balance: -
Weight: 161g.
Closure: Back Lock
Clip: Removable, multi-position, stainless steel
Sheath: -
Notes: -C10P -
Spyderco - Enuff Clip Point knife - FB31CPBK - coltello
Destinazione d'uso: Sportivo/Utility
Tipo di produzione: industriale
Lama: Full Tang, in acciaio inox VG-10
Produzione Lama: Japan
Manicatura: FRN (Fiberglass Reinforced Nylon)
Lunghezza lama: 70 mm.
Spessore della lama: 4 mm.
Lunghezza totale: 171 mm.
Bilanciatura: -
Peso: 108g.
Fodero: in Zytel, con clip/passante multiposizione in Kydex10129 -
Spyderco - Nilakka Folding Puukko by Pekka Tuominen - C164GBN
Destinazione d'uso: Sportivo
Tipo di produzione: Industriale
Produzione Lama: Taiwan
Lama: In acciaio inox CPM-S30V
Trattamento Lama: -
Manicatura: G10
Lunghezza lama: 87mm.
Spessore lama: 4.5mm.
Lunghezza chiuso: 117mm.
Lunghezza totale: 207mm.
Spessore da chiuso: -
Bilanciatura: -
Peso: 142g.
Chiusura: Liner Lock
Clip: in acciaio inox
Fodero: -
Confezione: scatola in cartone con loghi Spyderco
Note: Design by Pekka Tuominen10035 -
Ka-Bar - Desert Fighting Knife - 02-5014 coltello
Destinazione d'uso: tattico/militare
Tipo di produzione: industriale
Provenienza Lama: USA
Lama: in acciaio 1095 56/58HRC
Trattamento Lama: teflonatura
Manicatura: Kraton G
Lunghezza lama: 180mm.
Spessore della lama: 4mm.
Lunghezza chiuso: -
Lunghezza totale: 300mm.
Bilanciatura: arretrata a 1.5cm
Peso: 300g.
Chiusura: -
Clip: amovibile e reversibile in acciaio inox
Fodero: polimeri
Note: -5683 -
Ka-Bar - Large Heavy Bowie - 02-1277 coltello
Destinazione d'uso: militare/sportivo
Tipo di produzione: industriale
Lama: in acciaio al carbonio 1085
Trattamento Lama: teflonata
Manicatura: Forprene
Lunghezza lama: 230mm.
Spessore della lama: 5.5mm.
Lunghezza chiuso: -
Lunghezza totale: 370mm.
Bilanciatura: sul ramo di guardia
Peso: 450g.
Chiusura: -
Clip: -
Fodero: tattico in Cordura
Note: -5686 -
Ka-Bar BK&T - Becker Combat Bowie knife BK9 - knife
Intended use: Hiking / Heavy Utility
Type of production: Industrial
Production Lama: USA
Blade: 1095 steel at 56 / 58HRC
Blade treatment: Black Traction Coating
Handle: Zytel
Blade length: 235mm.
Blade thickness: 4.5mm.
Closed Length: -
Total length: 375mm.
Thick when closed: -
Balancing: -
Weight: 475g.
Closing: -
Clip: -
Sheath: ABS and Nylon
Packaging: Cardboard box with KA-Bar logos
Notes: Design by Ethan BeckerKB-BK9 -
Spyderco - Chokwe - C132 coltello
Destinazione d'uso: Sportivo / EDC
Tipo di produzione: Industriale
Produzione Lama: Taiwan
Lama: In acciaio inox CPM-S30V
Trattamento Lama: -
Manicatura: G-10 e Titanio
Lunghezza lama: 95mm.
Spessore lama: 2.5mm.
Lunghezza chiuso: 119mm.
Lunghezza totale: 215mm.
Spessore da chiuso: 15mm.
Bilanciatura: -
Peso: 102g.
Chiusura: Frame Lock
Clip: in acciaio inox
Fodero: -
Confezione: scatola in cartone con loghi Spyderco
Note: -3746 -
Spyderco - Delica 4 Stainless Steel SpyderEdge - C11S coltelli
Destinazione d'uso: Sportivo
Tipo di produzione: industriale
Lama: in acciaio inox VG-10 58HRC
Trattamento Lama: -
Produzione Lama: Japan
Manicatura: in acciaio inox
Lunghezza lama: 75mm.
Spessore della lama: 2.5mm.
Lunghezza chiuso: 107mm.
Lunghezza totale: 180mm.
Bilanciatura: -
Peso: 115g.
Chiusura: Back Lock
Clip: amovibile, multiposizione, in acciaio inox
Fodero: -
Note: -SP-C11S -
Spyderco - Delica 4 ZDP Full Flat - C11PGRE - knife
Destination of use: sports
Type of production: industrial
Country of production: Japan
Blade: stainless steel ZDP-189 65 / 67HRC
Blade treatment: satin finish
Handle: FRN (fiberglass reinforced nylon) with stainless steel embedded liners
Blade length: 75mm.
Blade thickness: 2.5mm.
Length closed: 107mm.
Total length: 180mm.
Thickness closed: 9.9mm.
Weight: 72g.
Locking system: Back Lock
Clip: stainless steel, removable and multiposition
Packaging: cardboard box with Spyderco logos
Note: -3655L -
Spyderco - Endura 4 Stainless Steel SpyderEdge - C10S - coltello
Destinazione d'uso: Sportivo
Tipo di produzione: industriale
Lama: in acciaio inox VG-10
Trattamento Lama: -
Produzione Lama: Japan
Manicatura: Acciaio Inox
Lunghezza lama: 95mm.
Spessore della lama: 3mm.
Lunghezza chiuso: 125mm.
Lunghezza totale: 220mm.
Bilanciatura: -
Peso: 161g.
Chiusura: Back Lock
Clip: amovibile, multiposizione, in acciaio inox
Fodero: -
Note: -3669 -
Spyderco - Ladybug Stainless Steel - LSSP3
Destinazione d'uso: Sportivo/EDC
Tipo di produzione: Industriale
Produzione Lama: Japan
Lama: in acciaio inox VG-10
Trattamento Lama: -
Manicatura: acciaio inox
Lunghezza lama: 49mm.
Spessore lama: 2mm.
Lunghezza chiuso: 62mm.
Lunghezza totale: 111mm.
Spessore da chiuso: 8mm.
Bilanciatura: -
Peso: 36g.
Chiusura: Back Lock
Clip: -
Fodero: -
Confezione: astuccio di cartone con loghi Spyderco
Note: -3759 -
Spyderco - Military Black Serrated - C36GPSBK coltello
Destinazione d'uso: Sportivo/Tattico
Tipo di produzione: Industriale
Produzione Lama: U.S.A.
Lama: in acciaio inox CPM 30SV
Trattamento Lama: BodyCote nero
Manicatura: G10
Lunghezza lama: 102mm.
Spessore lama: 3.3mm.
Lunghezza chiuso 140mm.
Lunghezza totale: 241mm.
Spessore da chiuso: 15mm.
Bilanciatura: -
Peso: 122g.
Chiusura: Liner Lock
Clip: amovibile, in acciaio inox
Fodero: -
Confezione: scatola in cartone con loghi Spyderco
Note: -3720S -
Spyderco - Military Camo Plain - SC36GPCM coltello
Destinazione d'uso: Sportivo/Tattico
Tipo di produzione: Industriale
Produzione Lama: U.S.A.
Lama: in acciaio inox CPM 30SV
Manicatura: G10 camo
Lunghezza lama: 102mm.
Spessore lama: 3.3mm.
Lunghezza chiuso 140mm.
Lunghezza totale: 241mm.
Spessore da chiuso: 15mm.
Bilanciatura: -
Peso: 122g.
Chiusura: Liner Lock
Clip: amovibile, in acciaio inox
Fodero: -
Confezione: scatola in cartone con loghi Spyderco
Note: -3794 -
Spyderco - Police knife Steel - C07P - knife
Spyderco - Police Steel - C07P - knife
Intended use: Sport
Type of production: Industrial
Blade Production: Japan
Blade: Stainless steel VG-10
Treatment Lama: -
Handle material: steel
Blade length: 100mm.
Blade thickness: 3mm.
Length closed: 135mm.
Total length: 235mm.
Thick when closed: 8mm
Balance: -
Weight: 158g.
Closure: Back Lock
Clip: Stainless Steel
Sheath: -
Packaging: cardboard box with logos Spyderco
Notes:2245