Knives, collection knife, tactical knives, outdoor knives, pocket knives and tools
-
Leatherman - 4.5" Nylon Sheath with Pockets for Signal and Surge - 934933 - Replacement Accessories
Protect your multifunction tool with these revised nylon sheaths.
Every detail is designed to ensure the cases last a long time, are reliable and easy to use. High-quality metal rivet snap allows for a secure closure that keeps the tool safe.
It is made of durable stretch ballistic nylon with reinforced seams for better accessibility and fit. Extra pockets in this nylon sheath are made to carry a bit kit, a bit extender, and a small flashlight or marker. It fits belts up to 4.5 cm wide. The overall fit may vary depending on the accessories carried.
COMPATIBILITY.
* Free P2
* Free P4
* Signal
* Super Tool
* Surge
INTERNAL DIMENSIONS
12 x 3.8 x 2 cmLE934933 -
Horl - 2 PRO - diamond and ceramic disc sharpener - Made in Germany
With HORL ® 2 Pro, Otmar and Timo Horl are making a very personal dream come true. With a high precision internal planetary gear, it triples the grinding motion generated by a simple rolling motion. Therefore, HORL ® 2 Pro sharpens at triple speed. The solid components made of stainless steel and aluminum give it a particularly noble appearance.
TWO DISCS
DIAMOND ABRASIVE The industrial diamonds used are suitable for effectively sharpening all steel for knives of any degree of hardness without water. When used correctly, the HORL ® Diamond Standard never needs to be replaced. The 46 μm grain size sharpens efficiently and precisely. In a short time, a high-quality sharpening result is achieved. The discs of the HORL ® 2 CRUISE are not replaceable
CERAMIC SANDING WHEEL After processing with HORL ® Diamond Standard, the ceramic sanding disc noticeably improves the sanding result. Only a few movements are needed for this. The result is a smooth, clean and filigree sharp knife edge.
SUPERIOR EFFICIENCY
Industrial diamonds are considered to be one of the most durable and effective abrasives on the market. Monocrystalline diamonds are harder than any knife steel. Using a galvanic process, the diamonds in the HORL ® Diamond Standard are set at approx. 55% in a nickel bed. After the first grinding processes, the initially rough surface becomes finer and HORL® Diamond Standard achieves the ideal sanding surface.
HOR-2PRO -
Horl - 2 OAK - sharpener with diamond and ceramic disc - Made in Germany
HORL ® 2 is the latest technological benchmark in the HORL ® family of sharpeners. Two sharpening angles and interchangeable grinding discs ensure greater flexibility. A completely new, play-free rolling sensation is created by the integrated ball bearings. The ceramic coating on the smoothing side guarantees impressive finishing results.
TWO DISCS
DIAMOND ABRASIVE The industrial diamonds used are suitable for effectively sharpening all steel for knives of any degree of hardness without water. When used correctly, the HORL ® Diamond Standard never needs to be replaced. The 46 μm grain size sharpens efficiently and precisely. In a short time, a high-quality sharpening result is achieved. The discs of the HORL ® 2 CRUISE are not replaceable
CERAMIC SANDING WHEEL After processing with HORL ® Diamond Standard, the ceramic sanding disc noticeably improves the sanding result. Only a few movements are needed for this. The result is a smooth, clean and filigree sharp knife edge.
SUPERIOR EFFICIENCY
Industrial diamonds are considered to be one of the most durable and effective abrasives on the market. Monocrystalline diamonds are harder than any knife steel. Using a galvanic process, the diamonds in the HORL ® Diamond Standard are set at approx. 55% in a nickel bed. After the first grinding processes, the initially rough surface becomes finer and HORL® Diamond Standard achieves the ideal sanding surface.
HOR-2QUERCIA -
Horl - 2 WALNUT - sharpener with diamond and ceramic disc - Made in Germany
HORL ® 2 is the latest technological benchmark in the HORL ® family of sharpeners. Two sharpening angles and interchangeable grinding discs ensure greater flexibility. A completely new, play-free rolling sensation is created by the integrated ball bearings. The ceramic coating on the smoothing side guarantees impressive finishing results.
TWO DISCS
DIAMOND ABRASIVE The industrial diamonds used are suitable for effectively sharpening all steel for knives of any degree of hardness without water. When used correctly, the HORL ® Diamond Standard never needs to be replaced. The 46 μm grain size sharpens efficiently and precisely. In a short time, a high-quality sharpening result is achieved. The discs of the HORL ® 2 CRUISE are not replaceable
CERAMIC SANDING WHEEL After processing with HORL ® Diamond Standard, the ceramic sanding disc noticeably improves the sanding result. Only a few movements are needed for this. The result is a smooth, clean and filigree sharp knife edge.
SUPERIOR EFFICIENCY
Industrial diamonds are considered to be one of the most durable and effective abrasives on the market. Monocrystalline diamonds are harder than any knife steel. Using a galvanic process, the diamonds in the HORL ® Diamond Standard are set at approx. 55% in a nickel bed. After the first grinding processes, the initially rough surface becomes finer and HORL® Diamond Standard achieves the ideal sanding surface.
HOR-2NOCE -
Horl - 2 CRUISE - sharpener with diamond and steel disc - Made in Germany
The HORL ® 2 CRUISE incorporates our state of the art development with a focus on the essential. A constant sharpening angle, our durable diamond coating and a beautiful "chalk" color make HORL ® 2 CRUISE an all-round talent for sharpness in any kitchen. The 20 ° sharpening angle produces fast sharpening results and a stable cutting edge with long-lasting sharpening.
TWO DISCS
DIAMOND ABRASIVE The industrial diamonds used are suitable for effectively sharpening all steel for knives of any degree of hardness without water. When used correctly, the HORL ® Diamond Standard never needs to be replaced. The 46 μm grain size sharpens efficiently and precisely. In a short time, a high-quality sharpening result is achieved. The discs of the HORL ® 2 CRUISE are not replaceable
FOR STAINLESS STEEL SANDING After the sharpening process with the diamond disc, the stainless steel sanding disc smoothes the blade and removes any burrs with the help of its integrated grooves. Only a few movements are needed. The discs of the HORL ® 2 CRUISE are not editable
SUPERIOR EFFICIENCY
Industrial diamonds are considered to be one of the most durable and effective abrasives on the market. Monocrystalline diamonds are harder than any knife steel. Using a galvanic process, the diamonds in the HORL ® Diamond Standard are set at approx. 55% in a nickel bed. After the first grinding processes, the initially rough surface becomes finer and HORL® Diamond Standard achieves the ideal sanding surface.
20 ° SHARPENING ANGLE FOR STABLE SHARPNESS
The 20 ° sharpening angle offers a new sharpness in the shortest possible time. The knife also maintains its sharpness for a long time thanks to the stable cutting edge and is suitable for the widest range of cuts in everyday life in the kitchen. Also excellent for sharpening knives for sports and outdoor use.
THE HORL ® S-PAD FOR CONTINUOUS FLEXIBILITY IN GRINDING
The combination of powerful neodymium magnets and the HORL ® S-Pad ensure that the knife is firmly fixed when sharpening. Reinforced by the non-slip effect of the S-Pad, even small blades can be sharpened correctly by adapting them to the desired height.
HOR-2CRUISE -
Horl - premium sharpening set - 3000 and 6000 stones - strop - SET - Made in Germany
Set consisting of two discs of sharpening stones with # 3000 and # 6000 grit and a leather strop to be used at the end to free the blade of all grinding residues and provide the final sharpening.
The set is designed to further refine the result of the sharpening process after using the diamond and ceramic discs, which are standard in HORL ® sharpeners.
The two discs are simply screwed onto the sharpener instead of the stock ones and are intended to refine the edge of the blade of your high-level knives. The stones can be used without water.
Compatible with HORL ® Sharpener 1. Gen, HORL ® 2 and HORL ® 2 PRO.
This item is not compatible with HORL ® 2 CRUISE.
Strop: Measurements: 25 x 5 cm - Thickness: 5mm
HOR-SET -
Horl - strip of cowhide for sharpening - strop - AL-P - Made in Germany
Original HORL ® leather made from vegetable tanned cowhide for a professional finish after sharpening. Thanks to its fine-pored surface, the blade is perfectly freed from even the finest residues on the edge after sharpening on stone.
Measurements: 25 x 5 cm - Thickness: 5mm
HOR-AL-P -
Leatherman - Thread Cutter Replacement Kit - 930350 - Accessories
Wire cutter replacement kit includes a set of replacement wire cutter inserts, two screws and a #8 Torx screwdriver for installation. Wire cutter inserts are made of premium stainless steel.
COMPATIBLE WITH:
* MUT®
* OHT
* Charge®+
* Charge®+ Forest Camo
* Charge®+ TTi
* Rebar
* Heritage Rebar
* Super Tool® 300+
* Heritage Super Tool 300
* Surge
* Surge® black and silver
* Wave®+
* Wave® black and silver
* Heritage Wave+
* Heritage Charge+
* FREE™ P2
* FREE™ P4
* Signal
* Signal® Topo
* Charge®+ G10
* 2H WaveLE930350 -
Higonokami - Kanekoma knife - Black Small Pocket Knife Japan
Charming knife used by the Japanese farmer.
As is typical for many agricultural tools, this Japanese knife is also extremely simple but the result of a centuries-old improvement that has found the difficult balance between form and function, and between cost and benefit.
The main feature is certainly the quality of the blade, in fact it uses a three-layer San Mai steel, of which the very hard one in the center.
It has a razor wire, as befits a tool created to cut and not just to be displayed in display cases.
Blade: San Mai carbon steel - Yasuki Steel Blue Paper Steel 62hrc in clad
Handle: iron foil
Closing: without blade lock
Length closed: 92mm.
Blade length: 76mm.
Blade thickness: 2.7mm
Open length: 155mm
Weight: 33g.
Note:HIGO-06BL€21.31Only 11 left -
Leatherman - MOLLE Black XL sheath - LE930371 - Accessories
Compatible with the following Leatherman pliers:
* MUT®
* MUT® EOD
* Super Tool® 300
* Super Tool® 300 EOD
* Original Surge®
* Surge®
* Heritage Super Tool® 300
Heavy and robust nylon lining with Velcro closure and belt loop for both horizontal and vertical ports. Equipped with standard connections of the M.O.L.L.E. typeLE930366 -
Higonokami - Kanekoma - Miyamoto Musashi M Pocket Knife Japan
Higonokami - Kanekoma - Miyamoto Musashi M Pocket Knife Japan
Blade: Carbon Steel San Mai - Yasuki Steel Blue Paper Steel 60HRC clad in
Handle: iron sheet
Closure: Without lock blade
Closed Length: 97mm.
Blade length: 75mm.
Blade thickness: 3mm
Overall length: 172mm
Weight: 42g.
Notes: Engravings on the handle and the blade. Lubricate the blade otherwise easily subject to oxidation.HIGO07SL€23.77Only 4 left -
Higonokami - Kanekoma - Miyamoto Musashi S Pocket Knife Japan
Higonokami - Kanekoma - Miyamoto Musashi S Pocket Knife Japan
Blade: Carbon Steel San Mai - Yasuki Steel Blue Paper Steel 60HRC clad in
Handle: iron sheet
Closure: Without lock blade
Closed Length: 97mm.
Blade length: 65mm.
Blade thickness: 3mm
Overall length: 153mm
Weight: 46g.
Notes: Engravings on the handle and the blade. Lubricate the blade otherwise easily subject to oxidation.HIGO-06SL€21.31Only 12 left -
Leatherman - Fodero MOLLE Black 4" - 931005 - Accessori
Compatibile con le seguenti pinze Leatherman:
* Sidekick
* Wingman
* Blast
* Kick
* Fuse
* Crunch
* Wave
* Charge
Fodero in pesante e robusto Nylon con chiusura in velcro e passante da cintura sia per porto orizzontale che per porto verticale. Dotato di attacchi standard di tipo M.O.L.L.E.LE931005 -
Higonokami - Sadakoma Higo in black leather - PRIVATE COLLECTION - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased.
* Condition: Overall in very good condition
* Commercially available: Discontinued
* Sharpening: Factory sharpened
* Marks on blade: None
* Marks on handle: None
* Box: Present
* Scabbard: -
* Manuals, Certificates and Warranties: -
* Checked and Certified by our in-house laboratoryFascinating knife used by the Japanese farmer "Higonokami kanekoma."
As is typical for many agricultural tools, this Japanese knife turns out to be extremely simple but the result of centuries of refinement that has found the difficult balance between form and function, and between cost and benefit.
The main feature definitely turns out to be the quality of the blade, in fact it uses a three-layer San Mai steel of which the one in the center is extremely hard.
Production: Japanese craftsmanship
Blade: San Mai carbon steel - Yasuki Steel Blue Paper Steel 62hrc
Handle: brass foil with elegant black leather cover
Closure: without blade lock
Length closed: 120mm.
Blade length: 90mm.
Blade thickness: 3mm
Length open: 210mm
Weight: 72g.
Notes: lubricate the blade well otherwise easily subject to oxidation.
Packaging: elegant and fine wooden box with Japanese ideograms.018208-CP€0.00Only -20 leftOut of stock -
Leatherman - Ainsworth 4" Premium Leather Sheath - 934935 - Accessories
The Ainsworth sheath is made in Slovakia with premium full-grain leather, tanned with plant extracts and offers premium protection for your tool.
It is the best we have created to date. The Ainsworth leather sheath is made from drum-dyed, full-grain, vegetable-tanned cowhide. This treatment makes the leather fine and able to improve with time. The snap, customized button keeps your tool safe over years of use.
This sheath is premium protection for your Leatherman and is covered by our two-year warranty. It fits belts up to 4.5 cm wide. Internal capacity: 10.2 x 3.8 x 2 cm
Compatible with the following Leatherman pliers:
* Free P2
* Free P4
* Charge+
* Wave+
* Wingman
* Sidekick
* Rev
* Rebar
* SkeletoolLE934935 -
Leatherman - 3-Way Magnetic Ratchet Screwdriver - 931030 - Accessories
Magnetic bit holder that allows secure positioning of both Leatherman flat and standard 63mm bits.
Compact 3-way ratchet system that allows continuous rotation in one direction, avoiding tool repositioning. The 3-way allows for a forward, reverse and locked setting.
SPECIFICATIONS
Length: 8.28 cm
Weight: 35.7 gCOMPATIBILITY:
* MUT (all versions)
* Charge (all versions)
* Charge+ (all versions)
* Signal (all versions)
* Skeletool (all versions)
* Super Tool 300M
* Surge (all versions)
* Wave (all versions)
* Wave+ (all versions)LE931030 -
Higonokami - Kanekoma knife - Black Medium Pocket Knife Japan
Charming knife used by the Japanese farmer.
As is typical for many agricultural implements, this Japanese knife is also extremely simple but the result of a centuries-old improvement that has found the difficult balance between form and function, and between cost and benefit.
The main feature is certainly the quality of the blade, in fact it uses a three-layer San Mai steel, of which the very hard one in the center.
It has a razor wire, as befits a tool created to cut and not just to be displayed in display cases.
Blade: San Mai carbon steel - Yasuki Steel Blue Paper Steel 62hrc in clad
Handle: iron foil
Closing: without blade lock
Length closed: 11mm.
Blade length: 72mm.
Blade thickness: 2.7mm
Open length: 170mm
Weight: 42g.
Note:HIGO-07BL€23.77Only 0 leftOut of stock -
Leatherman - Skeletool KB - folding knife
Intended use: Sports
Type of production: Industrial
Country of production: USA
Blade: 420HC stainless steel
Blade treatment: Satind
Handle: 6061-T6 aluminum
Blade length: 66mm.
Blade thickness: 2.6mm.
Length closed: 87mm.
Overall length: 151mm.
Thick when closed: 11mm.
Balancing: -
Weight: 38g.
Opening: hole on the blade
Washers: in brass
Closure: Liner Lock
Clip: stainless steel, removable, with the function of a bottle opener
Sheath: -
Packaging: Cardboard box with Leatherman logos
Note: -LE832385 -
Kanekoma - Sadakoma Higo traditional Japanese knife - brown leather 018 209 - knife
Kanekoma - Sadakoma Higo traditional Japanese knife - brown leather 018 209 - knife
Charming knife used by the Japanese farmer " Higonokami kanekoma ."
As is typical for many agricultural tools , this Japanese knife is extremely simple but the result of a secular improvement that has found it difficult balance between form and function, and between cost and benefit.
The main feature is definitely the quality of the blade, in fact, uses a steel San Mai to three layers of which the one at the center rough .
It has a razor wire , as is appropriate for a tool to cut and not just born to be displayed in glass cases .
production: Japanese crafts
Blade : carbon steel, San Mai
Handle: black brass plate with elegant brown leather cover
Closure: Without lock blade
Closed Length : 120mm .
Blade length : 90mm .
Blade thickness : 3mm
Length open : 210mm
Weight: 72g .
Notes: lubricate the blade otherwise easily subject to oxidation .
Packing: elegant and fine wooden box with Japanese characters018209€0.00Only -20 leftOut of stock