Knives, collection knife, tactical knives, outdoor knives, pocket knives and tools
-
Maserin - Energy - Titanium Flipper Knife by Sergio Consoli - 406 - knife
Intended use: Collection / Sporting
Type of production: Industrial
Country of production: Italy
Blade: in D2 steel 58/61HRC
Blade finish: satin
Handle: in titanium, with spacers and anodized titanium screws
Blade length: 105mm.
Blade thickness: 3.5mm.
Closed length: 130mm.
Total length: 230mm.
Thickness when closed: 9mm.
Weight: 110g.
Lock: Frame Lock with removable stainless steel flipper
Clip: in anodized titanium, carved from solid
Notes: Opening via Carson flipper system - Opening movement on ball bearings - Design by Sergio ConsoliMA-406 -
Maserin - Solar - Titanium Flipper by Sergio Consoli - 405 - knife
Intended use: Collection / Sporting
Production type: industrial
Country of production: Italy
Blade: steel D2 58/61HRC
Blade finishing: satin finish
Handle: titanium, with anodized titanium spacers and screws
Blade length: 105mm.
Blade thickness: 3.5mm.
Length closed: 135mm.
Total length: 235mm.
Thickness when closed: 9mm.
Weight: 130g.
Closure: Frame Lock with removable stainless steel clapper.
Clip: Anodized titanium, billet machined
Notes: Opening by Carson flipper system - Opening movement on ball bearings - Design by Sergio ConsoliMA-405 -
Sergio Consoli - Folder Liner Lock - PRIVATE COLLECTION - holographic resin handle - N ° 480
KNIFE WITHDRAWAL FROM A PRIVATE COLLECTION
* Type: Previously purchased
* Condition: in like new condition
* Available on the market: no longer in production single piece produced in 2019
* Sharpening: Original
* Marks on the blade: no
* Marks on the handle: no
* Box: -
* Sheath: no
* Manuals, Certificates and Warranties: original
* Checked and certified by our internal laboratoryIntended use: Collection
Type of production: Artisan by CIC Master Sergio Consoli
Production Lama: Italy
Blade: full-tang stainless steel RWL-34 60 / 61HRC
Blade treatment: -
Handle: holographic resin handle with titanium spacer
Blade length: 85mm.
Blade thickness: 4mm.
Closed length: 120mm.
Total length: 205mm.
Thick when closed: 19mm.
Balancing: -
Weight: 132g.
Closure: Liner Lock
Clip: -
Sheath: -
Packaging:
Notes: Handmade by Master Sergio Consoli - knife number 480 made in 2019CON-480 -
Sergio Consoli - Custom Liner Lock folder - N ° 271 - PRIVATE COLLECTION - handmade knife
Intended use: Collection
Type of production: Artisan by Maestro CIC Sergio Consoli
Lama production: Italy
Blade: full-tang in RWL-34 60 / 61HRC stainless steel
Blade treatment: -
Handle: carbon fiber
Blade length: 85mm.
Blade thickness: 4mm.
Length closed: 120mm.
Total length: 205mm.
Thick when closed: 19mm.
Balancing: -
Weight: 138g.
Closing: Liner Lock
Clip: carbon fiber
Sheath: -
Packaging:
Notes: Handmade by Maestro Sergio Consoli - knife number 271 made in 2009Acknowledgments
I currently make a limited number of knives a year and participate in some exhibitions, where among other things I have won my first prizes:
in 2005 at LAME SOTTO I PORTICI in Romano di Lombardia (BG) I was awarded the "best table on display"
always in the same year at the CULTER-EXPO in Novegro (MI) as "best folding knife"
moreover, I ranked second in the competition organized by LAME D'AUTORE magazine as the best fixed hunting blade
then in 2007 at "Scarperia" I won the third prize as the best closable
but above all again in 2007, I achieved, to my great satisfaction, the level of MASTER OF ITALIAN COLTELLINAI CORPORATION, recognition received at the first exam taken.
Presentation of the craftsman
Creating a hand knife is what I consider a real art form.
The satisfaction of seeing an object that comes from your own hands, that takes shape and that reaches mechanical, artistic and aesthetic perfection is what pays me more for all the hours of work and effort it takes to create a knife completely by hand.
The passion for "cutting irons" has always been in me since I was a child and has grown with me until the almost sudden decision to build my first knife on my own, it was a "need", almost an inner need that I couldn't put it off, my hands and my mind had to start creating, of course what I had always been passionate about ... the knife!
I started at 40, in 2003, practically self-taught, I had no manual work experience, but I had been a mechanical designer for many years and this allowed me to know perfectly the technique and all the various stages of mechanical processing.
Currently I am a member, with the rank of Maestro, which is the highest, of the Italian Knifemakers Guild, an association recognized all over the world for the seriousness and above all quality of execution that all its members must maintain over time.
What I do now is what I consider my art form ..., to create "handmade, hunting and collectible knives".
They are knives made entirely by hand, only with an infinite series of files, a small drill for the holes and a sander for the concave grinding of the blades, nothing else!
I make above all folding knives, which satisfy more my desire to build perfect mechanical objects and perfection in the smallest details, even inside where they cannot be seen, is what distinguishes a hand-made knife from an industrially made one .
The mechanics must then be made in the best possible way, without counting the hours of work, only in this way the final result is guaranteed.
Of course, over the years I have refined my technique and currently I have improved even more the mechanics by inserting a system of ball bearings on the blade rotation, which guarantee an absolutely perfect seal and allow the blade to close and open without the slightest friction and with an incredible sweetness.
With regard to the blades, I am experimenting with new types of hardening, which give hardnesses of 62-63 HRC and allow exceptional wire holding and cutting quality for all types of use.
Pathically I make all the knives on my initial design, they are all unique pieces made completely by hand down to the smallest details, one at a time, only in this way, in my opinion, a knife can be considered "handmade".
Regarding the materials that I use, I can say that for the blades I prefer RWL34 steel which is sintered from powders and guarantees the total absence of internal defects, sometimes I also use damask, both stainless steel and carbon, for the uniqueness 'that they donate to the knife, since each damask is always different from another.
For the handles, one of the most beautiful materials is the mammoth tooth, which can be found in a variety of colors, all beautiful, I also use the fossil ivory of mammoth, various briars, titanium and carbon fiber.
Most of the knives, however, are made entirely of steel, in order to then be engraved, always and rigorously by hand, to transform the knife even more into a real work of art ...CON-271 -
Maserin - Pitbull - Silver - Design by Sergio Consoli - 404/A - knife
Purpose of use: Sportsman
Type of production: industrial
Country of production: Italy
Blade: stainless steel M390
Blade Treatment: Stonewashed
Handle: Aluminum
Blade Length: 95mm.
Blade thickness: 3.5mm.
Closed length: 133mm.
Total length: 225 mm.
Closed thickness: 13mm.
Weight: 158g.
Opening: Carson Flipper system
Washers: Steel, ball bearings
Closure: Liner Lock
Clip: Stainless steel, removable and reversible
Sheath: cordura
Packing: Cardboard box with Maserin logos
Notes: Skull Crasher on the Shank - Design by Sergio ConsoliMA-404A -
Maserin - Pitbull - Blue - Design by Sergio Consoli - 404/B - knife
Purpose of use: Sportsman
Type of production: industrial
Country of production: Italy
Blade: stainless steel M390
Blade Treatment: Stonewashed
Handle: Aluminum
Blade Length: 95mm.
Blade thickness: 3.5mm.
Closed length: 133mm.
Total length: 225 mm.
Closed thickness: 13mm.
Weight: 158g.
Opening: Carson Flipper system
Washers: Steel, ball bearings
Closure: Liner Lock
Clip: Stainless steel, removable and reversible
Sheath: cordura
Packing: Cardboard box with Maserin logos
Notes: Skull Crasher on the Shank - Design by Sergio ConsoliM-404B -
Maserin - Pitbull - Black - Design by Sergio Consoli - 404/N - knife
Purpose of use: Sportsman
Type of production: industrial
Country of production: Italy
Blade: stainless steel M390
Blade Treatment: Stonewashed
Handle: Aluminum
Blade Length: 95mm.
Blade thickness: 3.5mm.
Closed length: 133mm.
Total length: 225 mm.
Closed thickness: 13mm.
Weight: 158g.
Opening: Carson Flipper system
Washers: Steel, ball bearings
Locking system: Liner Lock
Clip: Stainless steel, removable and reversible
Sheath: cordura
Packing: Cardboard box with Maserin logos
Notes: Skull Crasher on the Shank - Design by Sergio ConsoliM-404N -
Maserin - Bulldog Flipper - Design by Sergio Consoli - 403 - knife
Intended Use: sports
Type of production: Industrial
Production Lama: Italy
Blade: stainless steel N690Co
Treatment Blade: satin
Handle: titanium, with spacers G10
Blade length: 97mm.
Blade Thickness: 4.5mm.
Length closed: -mm.
Overall length: 220mm.
Thick when closed: -mm.
Balancing: -
Weight: 216g.
Lock: Liner Lock
Clip: carbon fiber
Sheath: -
Note: Opening the system through Carson flipper - Movement opening on ball bearings - Design by Sergio ConsoliMA-403 -
Maserin - Consoli I Ebano - 401/EB coltello
Consoli Design
Tipo di produzione: Industriale
Produzione Lama: Italia
Lama: In acciaio inox CPM S35VN 60HRC
Trattamento Lama: -
Manicatura: Ebano
Lunghezza lama: 75mm.
Spessore lama: 3mm.
Lunghezza chiuso: 100mm.
Lunghezza totale: 175mm.
Spessore da chiuso: 15mm.
Bilanciatura: arretrata 2,5 cm
Peso: 106g.
Chiusura: Back Lock
Clip: -
Fodero: Busta in cuoio
Confezione: scatola in cartone con loghi Maserin
Note: Design by Consoli6004EB -
Maserin - Consoli I Olivo - 401/OL coltello
Consoli Design
Tipo di produzione: Industriale
Produzione Lama: Italia
Lama: In acciaio inox CPM S35VN 60HRC
Trattamento Lama: -
Manicatura: Olivo
Lunghezza lama: 75mm.
Spessore lama: 3mm.
Lunghezza chiuso: 100mm.
Lunghezza totale: 175mm.
Spessore da chiuso: 15mm.
Bilanciatura: arretrata 2,5 cm
Peso: 106g.
Chiusura: Back Lock
Clip: -
Fodero: Busta in cuoio
Confezione: scatola in cartone con loghi Maserin
Note: Design by Consoli6004OL -
Maserin - Consoli I Radica Nera - 401/RN coltello
Consoli Design
Tipo di produzione: Industriale
Produzione Lama: Italia
Lama: In acciaio inox CPM S35VN 60HRC
Trattamento Lama: -
Manicatura: Radica
Lunghezza lama: 75mm.
Spessore lama: 3mm.
Lunghezza chiuso: 100mm.
Lunghezza totale: 175mm.
Spessore da chiuso: 15mm.
Bilanciatura: arretrata 2,5 cm
Peso: 106g.
Chiusura: Back Lock
Clip: -
Fodero: Busta in cuoio
Confezione: scatola in cartone con loghi Maserin
Note: Design by S. Consoli - trattandosi di materiale naturale, la colorazione e la venatura della radica può variare da modello a modello6004RA