Knives, collection knife, tactical knives, outdoor knives, pocket knives and tools
-
Leatherman - 4.5" Nylon Sheath with Pockets for Signal and Surge - 934933 - Replacement Accessories
Protect your multifunction tool with these revised nylon sheaths.
Every detail is designed to ensure the cases last a long time, are reliable and easy to use. High-quality metal rivet snap allows for a secure closure that keeps the tool safe.
It is made of durable stretch ballistic nylon with reinforced seams for better accessibility and fit. Extra pockets in this nylon sheath are made to carry a bit kit, a bit extender, and a small flashlight or marker. It fits belts up to 4.5 cm wide. The overall fit may vary depending on the accessories carried.
COMPATIBILITY.
* Free P2
* Free P4
* Signal
* Super Tool
* Surge
INTERNAL DIMENSIONS
12 x 3.8 x 2 cmLE934933 -
Horl - 2 PRO - diamond and ceramic disc sharpener - Made in Germany
With HORL ® 2 Pro, Otmar and Timo Horl are making a very personal dream come true. With a high precision internal planetary gear, it triples the grinding motion generated by a simple rolling motion. Therefore, HORL ® 2 Pro sharpens at triple speed. The solid components made of stainless steel and aluminum give it a particularly noble appearance.
TWO DISCS
DIAMOND ABRASIVE The industrial diamonds used are suitable for effectively sharpening all steel for knives of any degree of hardness without water. When used correctly, the HORL ® Diamond Standard never needs to be replaced. The 46 μm grain size sharpens efficiently and precisely. In a short time, a high-quality sharpening result is achieved. The discs of the HORL ® 2 CRUISE are not replaceable
CERAMIC SANDING WHEEL After processing with HORL ® Diamond Standard, the ceramic sanding disc noticeably improves the sanding result. Only a few movements are needed for this. The result is a smooth, clean and filigree sharp knife edge.
SUPERIOR EFFICIENCY
Industrial diamonds are considered to be one of the most durable and effective abrasives on the market. Monocrystalline diamonds are harder than any knife steel. Using a galvanic process, the diamonds in the HORL ® Diamond Standard are set at approx. 55% in a nickel bed. After the first grinding processes, the initially rough surface becomes finer and HORL® Diamond Standard achieves the ideal sanding surface.
HOR-2PRO -
Horl - 2 OAK - sharpener with diamond and ceramic disc - Made in Germany
HORL ® 2 is the latest technological benchmark in the HORL ® family of sharpeners. Two sharpening angles and interchangeable grinding discs ensure greater flexibility. A completely new, play-free rolling sensation is created by the integrated ball bearings. The ceramic coating on the smoothing side guarantees impressive finishing results.
TWO DISCS
DIAMOND ABRASIVE The industrial diamonds used are suitable for effectively sharpening all steel for knives of any degree of hardness without water. When used correctly, the HORL ® Diamond Standard never needs to be replaced. The 46 μm grain size sharpens efficiently and precisely. In a short time, a high-quality sharpening result is achieved. The discs of the HORL ® 2 CRUISE are not replaceable
CERAMIC SANDING WHEEL After processing with HORL ® Diamond Standard, the ceramic sanding disc noticeably improves the sanding result. Only a few movements are needed for this. The result is a smooth, clean and filigree sharp knife edge.
SUPERIOR EFFICIENCY
Industrial diamonds are considered to be one of the most durable and effective abrasives on the market. Monocrystalline diamonds are harder than any knife steel. Using a galvanic process, the diamonds in the HORL ® Diamond Standard are set at approx. 55% in a nickel bed. After the first grinding processes, the initially rough surface becomes finer and HORL® Diamond Standard achieves the ideal sanding surface.
HOR-2QUERCIA -
Horl - 2 WALNUT - sharpener with diamond and ceramic disc - Made in Germany
HORL ® 2 is the latest technological benchmark in the HORL ® family of sharpeners. Two sharpening angles and interchangeable grinding discs ensure greater flexibility. A completely new, play-free rolling sensation is created by the integrated ball bearings. The ceramic coating on the smoothing side guarantees impressive finishing results.
TWO DISCS
DIAMOND ABRASIVE The industrial diamonds used are suitable for effectively sharpening all steel for knives of any degree of hardness without water. When used correctly, the HORL ® Diamond Standard never needs to be replaced. The 46 μm grain size sharpens efficiently and precisely. In a short time, a high-quality sharpening result is achieved. The discs of the HORL ® 2 CRUISE are not replaceable
CERAMIC SANDING WHEEL After processing with HORL ® Diamond Standard, the ceramic sanding disc noticeably improves the sanding result. Only a few movements are needed for this. The result is a smooth, clean and filigree sharp knife edge.
SUPERIOR EFFICIENCY
Industrial diamonds are considered to be one of the most durable and effective abrasives on the market. Monocrystalline diamonds are harder than any knife steel. Using a galvanic process, the diamonds in the HORL ® Diamond Standard are set at approx. 55% in a nickel bed. After the first grinding processes, the initially rough surface becomes finer and HORL® Diamond Standard achieves the ideal sanding surface.
HOR-2NOCE -
Horl - 2 CRUISE - sharpener with diamond and steel disc - Made in Germany
The HORL ® 2 CRUISE incorporates our state of the art development with a focus on the essential. A constant sharpening angle, our durable diamond coating and a beautiful "chalk" color make HORL ® 2 CRUISE an all-round talent for sharpness in any kitchen. The 20 ° sharpening angle produces fast sharpening results and a stable cutting edge with long-lasting sharpening.
TWO DISCS
DIAMOND ABRASIVE The industrial diamonds used are suitable for effectively sharpening all steel for knives of any degree of hardness without water. When used correctly, the HORL ® Diamond Standard never needs to be replaced. The 46 μm grain size sharpens efficiently and precisely. In a short time, a high-quality sharpening result is achieved. The discs of the HORL ® 2 CRUISE are not replaceable
FOR STAINLESS STEEL SANDING After the sharpening process with the diamond disc, the stainless steel sanding disc smoothes the blade and removes any burrs with the help of its integrated grooves. Only a few movements are needed. The discs of the HORL ® 2 CRUISE are not editable
SUPERIOR EFFICIENCY
Industrial diamonds are considered to be one of the most durable and effective abrasives on the market. Monocrystalline diamonds are harder than any knife steel. Using a galvanic process, the diamonds in the HORL ® Diamond Standard are set at approx. 55% in a nickel bed. After the first grinding processes, the initially rough surface becomes finer and HORL® Diamond Standard achieves the ideal sanding surface.
20 ° SHARPENING ANGLE FOR STABLE SHARPNESS
The 20 ° sharpening angle offers a new sharpness in the shortest possible time. The knife also maintains its sharpness for a long time thanks to the stable cutting edge and is suitable for the widest range of cuts in everyday life in the kitchen. Also excellent for sharpening knives for sports and outdoor use.
THE HORL ® S-PAD FOR CONTINUOUS FLEXIBILITY IN GRINDING
The combination of powerful neodymium magnets and the HORL ® S-Pad ensure that the knife is firmly fixed when sharpening. Reinforced by the non-slip effect of the S-Pad, even small blades can be sharpened correctly by adapting them to the desired height.
HOR-2CRUISE -
Horl - premium sharpening set - 3000 and 6000 stones - strop - SET - Made in Germany
Set consisting of two discs of sharpening stones with # 3000 and # 6000 grit and a leather strop to be used at the end to free the blade of all grinding residues and provide the final sharpening.
The set is designed to further refine the result of the sharpening process after using the diamond and ceramic discs, which are standard in HORL ® sharpeners.
The two discs are simply screwed onto the sharpener instead of the stock ones and are intended to refine the edge of the blade of your high-level knives. The stones can be used without water.
Compatible with HORL ® Sharpener 1. Gen, HORL ® 2 and HORL ® 2 PRO.
This item is not compatible with HORL ® 2 CRUISE.
Strop: Measurements: 25 x 5 cm - Thickness: 5mm
HOR-SET -
Horl - strip of cowhide for sharpening - strop - AL-P - Made in Germany
Original HORL ® leather made from vegetable tanned cowhide for a professional finish after sharpening. Thanks to its fine-pored surface, the blade is perfectly freed from even the finest residues on the edge after sharpening on stone.
Measurements: 25 x 5 cm - Thickness: 5mm
HOR-AL-P -
Leatherman - Thread Cutter Replacement Kit - 930350 - Accessories
Wire cutter replacement kit includes a set of replacement wire cutter inserts, two screws and a #8 Torx screwdriver for installation. Wire cutter inserts are made of premium stainless steel.
COMPATIBLE WITH:
* MUT®
* OHT
* Charge®+
* Charge®+ Forest Camo
* Charge®+ TTi
* Rebar
* Heritage Rebar
* Super Tool® 300+
* Heritage Super Tool 300
* Surge
* Surge® black and silver
* Wave®+
* Wave® black and silver
* Heritage Wave+
* Heritage Charge+
* FREE™ P2
* FREE™ P4
* Signal
* Signal® Topo
* Charge®+ G10
* 2H WaveLE930350 -
Leatherman - MOLLE Black XL sheath - LE930371 - Accessories
Compatible with the following Leatherman pliers:
* MUT®
* MUT® EOD
* Super Tool® 300
* Super Tool® 300 EOD
* Original Surge®
* Surge®
* Heritage Super Tool® 300
Heavy and robust nylon lining with Velcro closure and belt loop for both horizontal and vertical ports. Equipped with standard connections of the M.O.L.L.E. typeLE930366 -
Brusletto - Vassfaret F/150 - Signature Edition - 19932 - knife
Intended use: Hunting / sports / collection
Type of production: semi-industrial
Production Blade: Norway
Blade: 440C stainless steel
Treatment Blade: mirror polishing
Handle: Micarta
Blade length: 90mm.
Blade Thickness: 3.5mm.
Length closed: -
Overall length: 210mm.
Balancing: back
Weight: 238g.
Sheath: Black leather
Note: version with blade autographed by Ken Where Nyhus, CEO of Brusletto & Co. AS10970€143.44Only 2 left -
Leatherman - Fodero MOLLE Black 4" - 931005 - Accessori
Compatibile con le seguenti pinze Leatherman:
* Sidekick
* Wingman
* Blast
* Kick
* Fuse
* Crunch
* Wave
* Charge
Fodero in pesante e robusto Nylon con chiusura in velcro e passante da cintura sia per porto orizzontale che per porto verticale. Dotato di attacchi standard di tipo M.O.L.L.E.LE931005 -
Leatherman - Ainsworth 4" Premium Leather Sheath - 934935 - Accessories
The Ainsworth sheath is made in Slovakia with premium full-grain leather, tanned with plant extracts and offers premium protection for your tool.
It is the best we have created to date. The Ainsworth leather sheath is made from drum-dyed, full-grain, vegetable-tanned cowhide. This treatment makes the leather fine and able to improve with time. The snap, customized button keeps your tool safe over years of use.
This sheath is premium protection for your Leatherman and is covered by our two-year warranty. It fits belts up to 4.5 cm wide. Internal capacity: 10.2 x 3.8 x 2 cm
Compatible with the following Leatherman pliers:
* Free P2
* Free P4
* Charge+
* Wave+
* Wingman
* Sidekick
* Rev
* Rebar
* SkeletoolLE934935 -
Leatherman - 3-Way Magnetic Ratchet Screwdriver - 931030 - Accessories
Magnetic bit holder that allows secure positioning of both Leatherman flat and standard 63mm bits.
Compact 3-way ratchet system that allows continuous rotation in one direction, avoiding tool repositioning. The 3-way allows for a forward, reverse and locked setting.
SPECIFICATIONS
Length: 8.28 cm
Weight: 35.7 gCOMPATIBILITY:
* MUT (all versions)
* Charge (all versions)
* Charge+ (all versions)
* Signal (all versions)
* Skeletool (all versions)
* Super Tool 300M
* Surge (all versions)
* Wave (all versions)
* Wave+ (all versions)LE931030 -
Leatherman - Skeletool KB - folding knife
Intended use: Sports
Type of production: Industrial
Country of production: USA
Blade: 420HC stainless steel
Blade treatment: Satind
Handle: 6061-T6 aluminum
Blade length: 66mm.
Blade thickness: 2.6mm.
Length closed: 87mm.
Overall length: 151mm.
Thick when closed: 11mm.
Balancing: -
Weight: 38g.
Opening: hole on the blade
Washers: in brass
Closure: Liner Lock
Clip: stainless steel, removable, with the function of a bottle opener
Sheath: -
Packaging: Cardboard box with Leatherman logos
Note: -LE832385 -
Microtech - DOC Blue Satin - Death on Contact - 153-7BL - knife
Intended use: Tactical / Collection
Type of production: Industrial
Production Lama USA
Blade: Stainless steel 154CM
Treatment Blade: Stone Washed
Handle: Aluminum 6061T6 Aircraft with non-slip inserts
Blade length: 80mm.
Blade thickness: 4mm.
Closed Length: 135mm.
Overall length: 230mm.
Thick when closed: -
Balancing: -
Weight: 204g.
Lock: Frame Lock
Clip: Removable, Stainless Steel
Sheath: -
Packaging: Cardboard box with logos Microtech
Design: by Mick Strider and Anthony Marfione10838 -
Microtech - DOC Green Stone Washed - Death on Contact - 153-4GR - knife
Intended use: Tactical / Collection
Type of production: Industrial
Production Lama USA
Blade: Stainless steel 154CM
Treatment Blade: Stone Washed
Handle: Aluminum 6061T6 Aircraft with non-slip inserts
Blade length: 80mm.
Blade thickness: 4mm.
Closed Length: 135mm.
Overall length: 230mm.
Thick when closed: -
Balancing: -
Weight: 204g.
Lock: Frame Lock
Clip: Removable, Stainless Steel
Sheath: -
Packaging: Cardboard box with logos Microtech
Design: by Mick Strider and Anthony Marfione10837 -
Microtech - DOC Black Carbon Fiber - Death on Contact - 153-1T - knife
Microtech DOC Black - Death on Contact - Flipper Knife - Knife
Intended use: Tactical / Collection
Type of production: Industrial
Production Lama USA
Blade: Stainless steel 154CM
Treatment Blade: Black Coating
Handle: Aluminum 6061T6 Aeronautics and Carbon Fiber
Blade length: 80mm.
Blade thickness: 4mm.
Closed Length: 135mm.
Overall length: 230mm.
Thick when closed: -
Balancing: -
Weight: 204g.
Lock: Frame Lock
Clip: Stainless Steel
Sheath: Nylon
Packaging: Cardboard box with logos Microtech
Design: Mick Strider and Anthony MarfioneMCT1531T -
Microtech - Metalmark - Black Serrated Titanium - 170-2
The Metalmark from Microtech has uniquely shaped handles that open to reveal a blade shape that simply flows. The channel handles are 6Al4V titanium, bead blast finished with Torx pivot screw adjustment and a spring loaded latch. The blade is 154-CM steel with a black finish. The build on the Metalmark balisong is solid. Specifications: Overall Length: 9.125" Blade Length: 3.875" Handle Material: 6Al4V Titanium Closed Length: 5.25" Weight: 6.0 oz.10051 -
Microtech - Metalmark - Satin Standard - 170-4
The Metalmark from Microtech has uniquely shaped handles that open to reveal a blade shape that simply flows. The channel handles are aluminum, black anodized with Torx pivot screw adjustment and a spring loaded latch. The blade is Elmax steel with a satin finish. The build on the Metalmark balisong is solid. Specifications: Overall Length: 9.125" Blade Length: 3.875" Blade Steel: Elmax Handle Material: 6061-T6 Aluminum Closed Length: 5.25" Weight: 4.8 oz.10050 -
Microtech - Metalmark - Silver Stonewash Standard - 170-10SI
The Metalmark from Microtech has uniquely shaped handles that open to reveal a blade shape that simply flows. The channel handles are aluminum, black anodized with Torx pivot screw adjustment and a spring loaded latch. The blade is 154-CM steel with a stonewash finish. The build on the Metalmark balisong is solid. Specifications: Overall Length: 9.125" Blade Length: 3.875" Blade Steel: 154-CM Handle Material: 6061-T6 Aluminum Closed Length: 5.25" Weight: 4.8 oz.10049 -
Microtech - Socom Delta - Tanto full Serrated - Black G-10 - 163-12 - coltello
The Microtech Socom Delta knife is the next generation of this classic folder and the winner of the "American Made Knife of the Year" at the 2012 BLADE Show. The Socom Delta features Microtech's titanium sub-lock tab and G10 composite handles, 3D machined with a subtle yet effective texture. The handle has bead blast finished hardware, pocket clip and a titanium back-strap with lanyard hole. Torx T30 pivot adjustment screw. This Socom Delta has a Tanto blade of S35VN steel with a bead blast finish and a partially serrated edge. The blade is deployed with ambidextrous thumb studs. The fit and finish of the Socom Delta Tanto is excellent, just as you'd expect from Microtech. Specifications: Overall Length: 9" Blade Length: 4" Cutting Edge: 3.75" Blade Steel: S35VN Blade Finish: Bead Blast Blade Edge: Partially Serrated Handle Material: Black G10 Closed Length: 5" Weight: 4.6 oz. Made in the USA10043 -
Microtech - Socom Elite - Tanto Plain Satin - Green Alluminum and Carbon Fiber - 161-4GR - coltello
The Socom Elite M/A knife from Microtech has been reintroduced as a 2011 model. This is a manual action liner lock folder. It features a stonewash finished S35-VN stainless steel tanto blade and dual thumb studs. The green anodized 6061-T6 aluminum handle has carbon fiber inserts. The Socom Elite knife includes a glass breaker and tip-down carry pocket clip. This Socom Elite features a free floating lock and ceramic race bearing system! Specifications: Overall Length: 9.2" Blade Length: 4" Closed Length: 5.2" Weight: 4.6 oz.10042 -
Microtech - Select Black Fire - Carbon Fiber Inserts - knife
Microtech's Select-Fire is their 2011 offering in the D/A (Dual Action) market. While there are numerous Dual Action offerings among manufacturers, this design won the Most Innovative award at the 2011 Blade Show. This model features a button for automatic deployment of the side opening blade, a large liner lock, oversized thumb stud for manual deployement, index choil for higher grip allowing precision cutting, anti-slip thumb grooves, and a pocket clip. Microtech's Select-Fire comes with a tool to lock the knife's automatic capability rendering it a manual only operating knife.
Dimensions
Blade Steel: Sheath: S35-VN
Blade Length: 3.73 inches
Overall Length: 8.9 inches (approx)
Handle Material: 6061-T6 AL w/ CF inlays
Glassbreaker: Tip-Up
Pocket Clip: Yes5656B -
Microtech - SF M / A Stone Washed - knife
Microtech - SF M / A Stone Washed - knife
Type of production: Industrial
Production Lama USA
Blade: stainless steel CPM-S35VN
Blade treatment: Stone Washed
Handle: Aluminium 6061T6 Aviation and Carbon Fiber
Blade length: 95mm.
Blade thickness: 4mm.
Closed Length: 140mm.
Overall length: 225mm.
Thick when closed: -
Balancing: -
Weight: 145g.
Lock: Liner Lock
Clip: Stainless Steel
Sheath: Nylon
Packaging: Cardboard box with Microtech logos
Notes: Awarded to Blade Awards 2011 as the most Innovative Design5656S -
Microtech - Socom Elite Black - 160-1 - coltello
I coltelli della serie Elite Socom vengono ritenuti dalla Microtech il loro più alto standard qualitativo per impiego tattico.
Prodotto per la prima volta nel 1996, negli anni sono state apportate numerose migliorie per rendere il coltello sempre più adattabile ai diversi scenari di utilizzo.
Destinazione d'uso: tattico / collezione
Tipo di produzione: Industriale
Produzione Lama: Usa
Lama: in acciaio CPM-S35VN
Manicatura: Alluminio aueronautico 6061T6 e fibra di carbonio
Lunghezza lama: 105mm.
Spessore lama: 4,5mm.
Lunghezza chiuso: 132mm.
Lunghezza totale: 232mm.
Spessore da chiuso: 20mm.
Peso: 126g.
Chiusura: Liner Lock
Clip: in acciaio
Fodero: in cordura
Confezione: in cartone, con loghi Microtech
Note: -5654 -
Microtech - Socom Elite Black Tan - 160-1 - coltello
I coltelli della serie Elite Socom vengono ritenuti dalla Microtech il loro più alto standard qualitativo per impiego tattico.
Prodotto per la prima volta nel 1996, negli anni sono state apportate numerose migliorie per rendere il coltello sempre più adattabile ai diversi scenari di utilizzo.
Destinazione d'uso: tattico / collezione
Tipo di produzione: Industriale
Produzione Lama: Usa
Lama: in acciaio CPM-S35VN
Manicatura: Alluminio aueronautico 6061T6 e fibra di carbonio
Lunghezza lama: 105mm.
Spessore lama: 4,5mm.
Lunghezza chiuso: 132mm.
Lunghezza totale: 232mm.
Spessore da chiuso: 20mm.
Peso: 126g.
Chiusura: Liner Lock
Clip: in acciaio
Fodero: in cordura
Confezione: in cartone, con loghi Microtech
Note: -5654D -
Microtech - Socom Elite Satin Serrated - 160-05 - coltello
I coltelli della serie Elite Socom vengono ritenuti dalla Microtech il loro più alto standard qualitativo per impiego tattico.
Prodotto per la prima volta nel 1996, negli anni sono state apportate numerose migliorie per rendere il coltello sempre più adattabile ai diversi scenari di utilizzo.
Destinazione d'uso: tattico / collezione
Tipo di produzione: Industriale
Produzione Lama: Usa
Lama: in acciaio inox CPM-20CV
Manicatura: Alluminio aueronautico 6061T6 ed inserti antiscivolo
Lunghezza lama: 105mm.
Spessore lama: 4,5mm.
Lunghezza chiuso: 132mm.
Lunghezza totale: 232mm.
Spessore da chiuso: 20mm.
Peso: 126g.
Chiusura: Liner Lock
Clip: in acciaio
Fodero: in cordura
Confezione: in cartone, con loghi Microtech
Note: -5653 -
Microtech - Socom Elite Tan Satin - 160-10 - coltello
I coltelli della serie Elite Socom vengono ritenuti dalla Microtech il loro più alto standard qualitativo per impiego tattico.
Prodotto per la prima volta nel 1996, negli anni sono state apportate numerose migliorie per rendere il coltello sempre più adattabile ai diversi scenari di utilizzo.
Destinazione d'uso: tattico / collezione
Tipo di produzione: Industriale
Produzione Lama: Usa
Lama: in acciaio inox CPM-20CV
Manicatura: Alluminio aueronautico 6061T6 ed inserti antiscivolo
Lunghezza lama: 105mm.
Spessore lama: 4,5mm.
Lunghezza chiuso: 132mm.
Lunghezza totale: 232mm.
Spessore da chiuso: 20mm.
Peso: 126g.
Chiusura: Liner Lock
Clip: in acciaio
Fodero: in cordura
Confezione: in cartone, con loghi Microtech
Note: -5653D