Knives, collection knife, tactical knives, outdoor knives, pocket knives and tools
-
Mcusta - Bamboo knife brown pakka wood - SPG2 Powder Steel - MC-0145G - knife
Collini Cutlery is the official distributor for Italy of MCUSTA Japanese knives
Intended use: sports / collection
Type of production: industrial cutting - handcrafted assembly and finishing
Blade: SPG2 61 / 62HRC
Blade treatment: -
Production Lama: Japan
Handle: Damascus steel and pakka wood
Blade length: 70mm.
Blade thickness: 3mm.
Closed length: 96mm.
Total length: 166mm.
Balancing: -
Weight: 96g.
Closure: Liner Lock
Clip: -
Sheath: cordura
Note: -MC-0145G -
Acta Non Verba - Z200 - Stonewashed Sleipner - Black Aluminum - knife
We always prioritize reliability and ease of use.
Its light weight and deep carry clip means you'll always have the Z200 by your side. If you prefer a controlled two-handed opening the Z200 is made for you. We milled a groove into the Sleipner steel blade that allows for easy and discreet opening.
Intended Use: EDC / SportyProduction type: Industrial
Country of Production: Czech Republic
Blade: Sleipner steel 58HRC
Blade Finish: Stonewashed
Handle: Aluminum 6061-T6
Blade length: 85mm.
Blade thickness: 3.5mm.
Total length: 205mm.
Weight: 102g.
Closing System: FrameLock
Clip: deep pocket, removable and reversible, flush stainless steel with Black DLC finish
Package: Cardboard box with ANV logos
Notes: At the base of the groove of the blade there is a small fluorescent dot that, accumulating light or ultraviolet, in the dark releases a low luminescence useful to identify the knife.ANV-Z200-004 -
Acta Non Verba - Z100 Flipper - Stonewashed Sleipner - Coyote G-10 - knife
Timeless simplicity is the main reason why you will never get tired of your Z100.
In our daily lives we look for things that become part of us, things that we will keep with us every day without even having to think about it. Thanks to the deep pocket clip, you won't even know you have it with you until the right moment comes. Then, as soon as you use it, you'll appreciate the flipper opening and sleipner steel blade.
Intended Use: EDC / SportingProduction type: Industrial
Country of Production: Czech Republic
Blade: Sleipner steel 58HRC
Blade Finish: Stonewashed
Handle: G-10
Blade length: 85mm.
Blade thickness: 3.5mm.
Total length: 205mm.
Weight: 95g.
Closing System: LinerLock
Clip: deep pocket, removable and reversible, flush in stainless steel
Package: Cardboard box with ANV logos
Notes: at the base of the flipper there is a small fluorescent dot that, accumulating light or ultraviolet, in the dark releases a low luminescence useful to identify the knife.ANV-Z100-012 -
Acta Non Verba - P200 - Stonewashed N690Co - Orange G10 and Leather - knife
Anyone who knows how to take care of themselves outdoors will appreciate the reliability of the P200, which finds its greatest strength in its simplicity and no-frills design.
A high blade bevel combined with a low steel thickness is a must for any great cutting tool. Choosing to use a strong, stainless steel like Bohler N690Co will not affect the P200 even in challenging weather and usage conditions, even for long periods away from home. The low weight, flat G10 handle and compact size of the P200 ensure that your partner will never let you down in terms of weight and bulk either, because we know how important every single gram is when hiking.
Intended use: hiking / utilityType of production: Industrial
Blade production: Czech Republic
Blade: full tang, stainless steel N690Co 58HRC
Blade Finish: Stonewashed
Handle: G-10
Blade length: 100mm.
Blade thickness: 3.5mm.
Total lenght: 220mm.
Weight: 150g.
Scabbard: Black leather, sewn and handmade.
Package: Cardboard box with ANV logos
Notes: -ANV-P200-011 -
Acta Non Verba - P200 - Stonewashed N690Co - Black G10 and Kydex - knife
Anyone who knows how to take care of themselves outdoors will appreciate the reliability of the P200, which finds its greatest strength in its simplicity and no-frills design.
A high blade bevel combined with a low steel thickness is a must for any great cutting tool. Choosing to use a strong, stainless steel like Bohler N690Co will not affect the P200 even in challenging weather and usage conditions, even for long periods away from home. The low weight, flat G10 handle and compact size of the P200 ensure that your partner will never let you down in terms of weight and bulk either, because we know how important every single gram is when hiking.
Intended use: hiking / utilityType of production: Industrial
Blade production: Czech Republic
Blade: full tang, stainless steel N690Co 58HRC
Blade Finish: Stonewashed
Handle: G-10
Blade length: 100mm.
Blade thickness: 3.5mm.
Total lenght: 220mm.
Weight: 150g.
Sheath: kydex, with double belt loop M.O.L.L.E. compatible.
Package: Cardboard box with ANV logos
Notes: -ANV-P200-006 -
Ontario Knife Company - Bird and Trout Knife with leather sheath - 7027 - knife
Known for their rugged longevity in countless practical applications, Ontario's famous Old Hickory knives have been a go-to for cooking and outdoor enthusiasts for over 95 years. This model, thanks to its small size and ease of use, is ideal for working birds and fish. It features an 8.5cm stainless steel blade with a satin finish. As with all Old Hickory models, this knife also features a wooden handle with brass rivets. Both the fillet knife and the leather sheath are made in the USA.
Intended use: Fishing / Hunting / Cooking
Type of production: industrial
Country of production: USA
Blade: 57-59 HRC stainless steel
Blade treatment: satin finish
Handle: wood
Blade length: 85mm.
Blade thickness: 2mm.
Total length: 170mm.
Sheath: in leather
Packaging: Ontario official box
Note: To make the knife sharper, through our in-house laboratory, we further sharpen each blade before shipping.CARE AND MAINTENANCE: it is recommended to wash it under running water and dry it immediately manually with a clean cotton cloth or absorbent paper.
ON7027 -
Ontario Knife Company - 417 Filet Knife with leather sheath - 1275 - knife
Revisiting a classic Ontario model, this Old Hickory fish fillet knife comes with a leather sheath. Ideal for hunting, fishing or cooking, the Ontario Old Hickory 417 Filet Knife features a 16cm stainless steel blade with a satin finish. As with all Old Hickory models, this knife also features a wooden handle with brass rivets. Both the fillet knife and the leather sheath are made in the USA.
Intended use: Fishing / Hunting / Cooking
Type of production: Industrial
Country of production: USA
Blade: 55-58 HRC stainless steel
Blade treatment: satin finish
Handle: wood
Blade length: 160mm.
Blade thickness: 2mm.
Total length: 275mm.
Sheath: in leather
Packaging: Ontario official box
Notes: To make the knife sharper, through our internal laboratory, we further sharpen each blade before shipping.CARE AND MAINTENANCE: it is recommended to wash it under running water and immediately dry it manually with a clean cotton cloth or absorbent paper.
ON1275 -
Ontario Knife Company - Old Hickory Hop Field Knife - 5060 - knife
Produced by the American Ontario, this knife contains a series of elements that make it practical, manageable, simple, spartan and fascinating. The Hop field is a universal knife, convenient in the kitchen, perfect for a barbecue, valid for hiking or camping.
Intended use: Hiking / Camp / Meat
Type of production: Industrial
Country of production: USA
Blade: 1095 Carbon Steel 57-59 HRC
Blade treatment: satin finish
Handle: wood
Blade length: 178mm.
Blade thickness: 2mm.
Total length: 300mm.
Weight: 134g.
Sheath: without sheath
Packaging: -
Notes: To make the knife sharper, through our internal laboratory, we further sharpen each blade.ON5060 -
Mcusta - Take knife VG10 Damascus - Shinra Series - Stamina Wood - MC-0075D - knife
Collini Cutlery is the official distributor of MCUSTA Japanese knives for Italy
Intended use: sports / collection / gentlemen
Type of production: industrial cutting - craft assembly and finishing
Blade: in SanMai steel with VG-10 stainless steel cutting edge at 59 / 60HRC and outer cheeks in 33-layer nickel damask
Production Lama: Japan
Handle: Stamina Wood
Blade length: 65mm.
Blade thickness: 3mm.
Length closed: 95mm.
Total length: 164mm.
Balancing: -
Weight: 58g.
Closure: Liner Lock
Clip: -
Sheath: in fabric
Note: -MC-0075D -
Mcusta - Tsuchi Damascus knife - Shinra Stamina Wood - MC-0078D - knife
Collini Cutlery is the official distributor of MCUSTA Japanese knives for Italy
Intended use: sports / collection
Type of production: industrial cutting - craft assembly and finishing
Blade: in SanMai steel with VG-10 stainless steel cutting edge at 59 / 60HRC and outer cheeks in 33-layer nickel damask
Production Lama: Japan
Handle: Stamina Wood
Blade length: 70mm.
Blade thickness: 3mm.
Length closed: 95mm.
Total length: 167mm.
Balancing: -
Weight: 66g.
Closure: Liner Lock
Clip: -
Sheath: fabric bag
Note: -MC-0078D -
Mcusta - Katana knife series - MC-0044C - Black / Green - knife
Mcusta - Series Katana - MC-0041C - knife
Intended use: sports / collection
Type of production: industrial cutting - assembly and handcrafted finishes
Production Lama: Japan
Blade: laminated steel with sharp VG-10 to 59/60 HRC
Handle: Aluminum
Blade length: 80mm.
Blade thickness: 3mm.
Closed Length: 110mm.
Overall length: 194mm.
Thick when closed: 14mm.
Weight: 96g.
Lock: Liner Lock
Clip: Stainless Steel
Packaging: cardboard box with logos Mcusta
Notes: -MC-0044C -
Mcusta - Katana knife series - MC-0042C - Blue / Orange - knife
Mcusta - Series Katana - MC-0041C - knife
Intended use: sports / collection
Type of production: industrial cutting - assembly and handcrafted finishes
Production Lama: Japan
Blade: laminated steel with VG-10 edge hardened to 59/60 HRC
Handle: Aluminum
Blade length: 80mm.
Blade thickness: 3mm.
Closed Length: 110mm.
Overall length: 194mm.
Thick when closed: 14mm.
Weight: 96g.
Lock: Liner Lock
Clip: Stainless Steel
Packaging: cardboard box with logos Mcusta
Notes: -MC-0042C -
Mcusta - Masamune Dates MC-0186D knife - VG10 Damascus SanMai - Sengoku Series - knife
Collini Cutlery is the official distributor of MCUSTA Japanese knives for Italy
Intended use: sports / collection
Type of production: industrial cutting - craft assembly and finishing
Production Lama: Japan
Blade: in SanMai steel with VG-10 stainless steel cutting edge at 59 / 60HRC and outer cheeks in 33-layer nickel damask
Handle: Micarta
Blade length: 93mm.
Blade thickness: 3mm.
Length closed: 117mm.
Total length: 210mm.
Thick when closed: 17.5mm.
Weight: 120g.
Closure: Liner Lock
Clip: in stainless steel
Packaging: cardboard box with Mcusta logos
Notes: -MC-0186D -
Ontario Knife Company - Bob Dozier Arrow Folder - 9100 - knife
Intended use: Tactical / EDC
Type of production: Industrial
Country of production: Taiwan
Blade: in steel tool D2
Blade treatment: Stonewashed
Handle: G10
Blade length: 92mm.
Blade thickness: 3mm.
Length closed: 115mm.
Total length: 207mm.
Thick when closed: 11.7mm.
Weight: 85g.
Opening: through thumbstood, from right-handed
Washers: teflon
Closure: liner lock
Clip: stainless steel, removable
Packaging: Cardboard box with Ontario Knife Company logos
Notes: Design by Bob DozierON9100 -
Ontario Knife Company - Bushcraft Woodsman - 8697 - knife
Intended use: Hiking / Hunting
Type of production: Industrial
Country of production: USA
Blade: full tang in 420 stainless steel
Blade treatment: satin finish
Handle: walnut wood
Blade length: 240mm.
Blade thickness: 5.8mm.
Total length: 375mm.
Balancing: slightly advanced
Weight: 506g.
Sheath: nylon, M.O.L.L.E compatible, rigid polypropylene insert
Packaging: Cardboard box with OKC logos
Note: -ON8697 -
Mcusta - MC-0191C Slip Joint Knife Black / Red Wood - knife
Destination of use: sport / collection
Type of production: industrial cutting - assembly and artisan finishes
Lama production: Japan
Blade: in laminated stainless steel damascus with cutting edge in VG-10 at 59 / 60HRC
Handle: wood
Blade length: 85mm.
Blade thickness: 3mm.
Length closed: 110mm.
Total length: 195mm.
Thick when closed: 12mm.
Weight: 78g.
Closure: Joint Slip
Clip: -
Packaging: cardboard box with Mcusta logos with fabric sheath
Note: -MC-0191C -
Mcusta - MC-193C Slip Joint Knife Black / Green - knife
Collini Cutlery is the official distributor for Italy of MCUSTA Japanese knives
Destination of use: sport / collection
Type of production: industrial cutting - assembly and artisan finishes
Lama production: Japan
Blade: in laminated stainless steel damascus with cutting edge in VG-10 at 59 / 60HRC
Handle: wood
Blade length: 85mm.
Blade thickness: 3mm.
Length closed: 110mm.
Total length: 195mm.
Thick when closed: 12mm.
Weight: 78g.
Closure: Joint Slip
Clip: -
Packaging: cardboard box with Mcusta logos with fabric sheath
Note: -MC-193C -
Mcusta - Rikyu Tea Ceremony Damascus - MC-0184D - knife
Cutlery Collini is the official distributor for Italy of Japanese knives Mcusta
Intended use: sports / collection
Type of production: industrial cutting - assembly and handcrafted finishes
Production Lama: Japan
Blade: Stainless sanmai with sharp steel VG-10 to 59/60 HRC and cheeks outside Damascus nickel to 33 layers
Handle: Micarta
Blade length: 93mm.
Blade thickness: 3mm.
Closed Length: 117mm.
Overall length: 210mm.
Thick when closed: 17.5mm.
Weight: 120g.
Lock: Liner Lock
Clip: Stainless Steel
Packaging: cardboard box with logos Mcusta
Note: Cordura sheath and leather12016 -
Mcusta - Nami Small Damascus Japan - MC-0111D - knife
Mcusta - Nami Small Damascus Japan - MC-0111D - knife
Collini Cutlery is the official distributor for Italy of Japanese knives Mcusta
Intended Use: Sport / collection
Type of production: industrial cutting - assembly and handcrafted finishes
Blade: Stainless steel sanmai with sharp VG-10 to 59/60HRC cheeks and external nickel damascus 33 layers
Blade Production: Japan
Handle: steel hammered
Blade length: 65mm.
Blade Thickness: 3mm.
Closed Length: 95mm.
Overall length: 160mm.
Balancing: -
Weight: 74g.
Lock: Liner Lock
Clip: -
Sheath: -
Notes: -MC-0111D -
Mcusta - Take VG10 Damascus - Shinra Series - Black PakkaWood - MC-0076DP - knife
Intended use: sport / collection / gentlemen
Type of production: industrial cutting - craft assembly and finishing
Blade: in SanMai steel with VG-10 stainless steel cutting edge at 59 / 60HRC and outer cheeks in 33-layer nickel damask
Production Lama: Japan
Handle: Pakkawood wood, worked bamboo style
Blade length: 65mm.
Blade thickness: 3mm.
Length closed: 95mm.
Total length: 164mm.
Balancing: -
Weight: 58g.
Closure: Liner Lock
Clip: -
Sheath: in fabric
Note: -MC-0076DP -
Mcusta - Shadow - MC-114BD - knife
Intended use: sports / collection
Type of production: industrial cutting - craft assembly and finishing
Production Lama: Japan
Blade: in damask laminated and hammered stainless steel with cutting edge in VG-10 at 59 / 60HRC
Handle: Stainless Steel
Blade length: 85mm.
Blade thickness: 3mm.
Length closed: 112mm.
Total length: 192mm.
Thick when closed: 8mm.
Weight: 114g.
Closure: Frame Lock
Clip: in stainless steel
Packaging: cardboard box with Mcusta logos
Note: -MC-0114BD -
Mcusta - Elite Tactility Micarta knife VG10 - MC-00121 knife
Collini Cutlery is the official distributor of MCUSTA Japanese knives for Italy
Intended use: sports / collection
Type of production: industrial cutting - craft assembly and finishing
Production Lama: Japan
Blade: VG-10 stainless steel at 59 / 60HRC
Handle: Micarta
Blade length: 95mm.
Blade thickness: 3mm.
Length closed: 115mm.
Total length: 207mm.
Thick when closed: 17.5mm.
Weight: 100g.
Closure: Liner Lock
Clip: in stainless steel
Packaging: cardboard box with Mcusta logos
Note: -MC-00121 -
Mcusta - Yoroi Damasco - 37D - knife
Intended Use: sporivo / collection
Type of production: industrial cutting - assembly and handcrafted finishes
Blade: Stainless steel sanmai with sharp VG-10 59/60HRC cheeks and stainless steel external
Treatment Lama: -
Blade Production: Japan
Handle: damascus steel
Blade length: 70mm.
Blade Thickness: 3mm.
Closed Length: 90mm.
Total length: 162mm.
Balance: -
Weight: 86g.
Lock: Liner Lock
Clip: -
Sheath: -
Notes: -3984 -
Ontario / Utilitac II - JPT-3S Drop by Joe Pardue - PRIVATE COLLECTION - knife
KNIFE RETIRED FROM PRIVATE COLLECTION
* Provenance: Collected by a private individual, previously purchased
* Condition: Overall in very good condition
* Commercially available: Discontinued
* Sharpness: Factory
* Marks on blade: NO
* Marks on handle: NO
* Box: -
* Sheath: /
* Manuals, Certificates and Warranties: -
* Checked and Certified by our internal laboratoryIntended use: Sports / EDC
Type of production: Industrial
Blade production: Taiwan
Blade: AUS-8 58HRC stainless steel
Blade Treatment: -
Handle: Zytel
Blade length: 85mm.
Blade thickness: 3mm.
Closed length: 120mm.
Total length: 205mm.
Closed thickness: 14mm.
Balancing: -
Weight: 152g.
Closure: Liner Lock
Clip: stainless steel
Sheath: -
Packaging: -
Notes: Design by Joe PardueAP-2798 -
Mcusta - Platinum Label Blade Show 2022 Limited Edition - MCPLBS-22 - knife
Extremely limited edition Platinum Label series folding knife with Mokume damascus blade and heads produced in only 20 examples each with a different coloration of the wood briar. Each specimen is therefore unique and differs from the previous one.
Intended use: collectionType of production: industrial cutting - craftsmanship, assembly and finishing
Country of production: Seki - Japan
Blade: made of Mokume stainless steel with VG-10 cutting edge, forged with rainbow damascus rolling, achieved through layers of stainless steel, copper and brass and hammered through Tsuchime technique
Handle: made of Mokume stainless damask steel and wood briar
Blade length: 80mm.
Blade thickness: 3mm.
Length closed: 110mm.
Total length: 195mm.
Thickness when closed: 14mm.
Weight: 208g.
Closure: Liner Lock
Clip: handcrafted, removable and reversible, hammered stainless steel
Packaging: wooden box with Mcusta logos
Notes: Special and Limited Edition made in only 20 pieces for the Blade Show in Atlanta 2022MC-PLBS22 -
Acta Non Verba - Z200 - Stonewashed Sleipner - Olive G-10 - knife
We always prioritize reliability and ease of use.
Its light weight and deep carry clip means you'll always have the Z200 by your side. If you prefer a controlled two-handed opening the Z200 is made for you. We milled a groove into the Sleipner steel blade that allows for easy and discreet opening.
Intended Use: EDC / SportyProduction type: Industrial
Country of Production: Czech Republic
Blade: Sleipner steel 58HRC
Blade Finish: Stonewashed
Handle: G-10
Blade length: 85mm.
Blade thickness: 3.5mm.
Total length: 205mm.
Weight: 102g.
Closing System: LinerLock
Clip: deep pocket, removable and reversible, flush mounted, stainless steel with Black DLC finish
Package: Cardboard box with ANV logos
Notes: At the base of the blade groove there is a small fluorescent dot that, accumulating light or ultraviolet, in the dark releases a low luminescence useful to identify the knife.ANV-Z200-009 -
Acta Non Verba - Z100 Flipper - Stonewashed Sleipner - Black Aluminum - knife
Timeless simplicity is the main reason why you will never get tired of your Z100.
In our daily lives we look for things that become part of us, things that we will keep with us every day without even having to think about it. Thanks to the deep pocket clip, you won't even know you have it with you until the right moment comes. Then, as soon as you use it, you'll appreciate the flipper opening and sleipner steel blade.
Intended Use: EDC / Sporting
Production type: Industrial
Country of Production: Czech Republic
Blade: Sleipner steel 58HRC
Blade Finish: Stonewashed
Handle: Aluminum 6061-T6
Blade length: 85mm.
Blade thickness: 3.5mm.
Total length: 205mm.
Weight: 95g.
Closing System: FrameLock
Clip: deep pocket, removable and reversible, flush stainless steel with Black DLC finish
Package: Cardboard box with ANV logos
Notes: at the base of the flipper there is a small fluorescent dot that, accumulating light or ultraviolet, in the dark releases a low luminescence useful to identify the knifeANV-Z100-003 -
Acta Non Verba - Z400 - Stonewashed Sleipner - Olive G-10 - knife
Confident elegance complemented by aristocratic lines gives the Z400 its well-deserved dominance over the rest of our folding knives.
A dagger-style, single-edged spear point blade made from Sleipner steel and equipped with a double guard that allows for an aggressive opening at the edge of the pocket when drawing or the ability to use it as a flipper system. Rounding things out is an extremely durable, lightweight handle made of G10 composite with a secure liner lock and a deep pocket clip. All of this is designed in combination with a sense of elegance and simplicity. This is the Z400.
Intended use: EDC / SportingProduction Type: Industrial
Country of Production: Czech Republic
Blade: Sleipner 58HRC steel
Blade Finish: Stonewashed
Handle: G-10
Blade length: 100mm.
Blade thickness: 3.5mm.
Total length: 230mm.
Weight: 110g.
Closing System: LinerLock
Clip: deep pocket, removable and reversible, flush mounted
Package: Cardboard box with ANV logos
Notes: -ANV-Z400-006 -
Acta Non Verba - P100 - Stonewashed Sleipner - Black Paracord - knife
How far can you go on the path of minimalism?
The elegance of a single piece of Sleipner steel, precision machined and ground to produce a reliable tool. The P100 was conceived as a staple of any personal EDC set where everything unnecessary has been removed. With its low weight and ultra-thin profile scabbard, the P100 can be exactly what you need at all times. Anytime, anywhere.
Intended use: hiking / light utility / neck knifeProduction type: Industrial
Blade production: Czech Republic
Blade: Full tang, Sleipner 58HRC steel
Blade finish: Stonewashed
Handle: Paracord
Blade length: 75mm.
Blade thickness: 3.5mm.
Total length: 185mm.
Weight: 62g.
Sheath: kydex, with double belt loop M.O.L.L.E. compatible.
Package: Cardboard box with ANV logos.
Notes: Possibility to use it as neck knife.ANV-P100-002 -
Acta Non Verba - P300 - Stonewashed Sleipner - Black G10 and Kydex - knife
A simple knife that isn't afraid of rough treatment.
Sometimes you need to have a longer blade with you, whether you need to go fishing or make firewood. The P300 is a true universal workhorse that's always at your side thanks to its massive Sleipner steel blade with fantastic cutting performance. But a good tool also needs a reliable and secure handle and in our case this is guaranteed by a G10 composite handle with a rough finish and three massive screws that hold it all together for maximum performance.
Intended use: hiking / utilityManufacturing Type: Industrial
Blade production: Czech Republic
Blade: full tang, in Sleipner 58HRC steel
Blade Finish: Stonewashed
Handle: G-10
Blade length: 140mm.
Blade thickness: 5mm.
Total length: 270mm.
Weight: 255g.
Sheath: kydex, with double belt loop M.O.L.L.E. compatible.
Package: Cardboard box with ANV logos
Notes: -ANV-P300-014 -
Ontario Knife Company - Hiking Knife - 8187 - bushcraft knife
Intended Use: Utility / Bushcrat / Hunting
Production type: Industrial
Country of Production: USA
Blade: 420HC stainless steel full tang
Blade treatment: Satin finish
Handle: Micarta Mossy Oak
Blade length: 86mm.
Blade thickness: 3.5mm.
Total length: 210mm.
Balance: on the guard branch
Weight: 148g.
Scabbard: Belt, leather, for vertical carrying.
Packaging: Cardboard box with OKC logos
Notes: -ON8187 -
Acta Non Verba - P500 - Stonewashed Sleipner - knife
We don't know where your next expedition will take you, but one thing's for sure: there's nothing more important than reliable, quality gear. In designing our flagship P500, we combined the seemingly incompatible. We ground the high-quality Swedish Sleipner steel blade at two different angles. Near the handle is a high sharpness suitable for normal cutting and finer work, while the front has a very durable low, bellied sharpness that shifts the knife's center of gravity significantly toward the tip allowing you to use it on hardwoods and materials with great power. For safe and controlled work, the back of the "five hundred" handle also widens significantly which, in combination with the grippy G10 composite surface, forms a secure and comfortable grip.
Intended use: hiking / utility
Type of production: Industrial
Blade production: Czech Republic
Blade: Full tang, made of Sleipner 58HRC steel
Blade Finish: Stonewashed
Handle: G-10
Blade length: 190mm.
Blade thickness: 5mm.
Total length: 330mm.
Weight: 377g.
Scabbard: Black leather
Package: Cardboard box with ANV logos
Notes: -ANV-P500-006 -
Mcusta - Shinari Shinra Maxima knife - SPG2 - PRIVATE COLLECTION - Green Pakka Wood - MC-0203G - knife
Knife withdrawn from a private collection in excellent condition, uniquely has a small imperfection on the wood at the base of the handle (visible in the close up of the photos) - Complete with original box - Checked and certified by our in-house Coltelleria Collini laboratory.
The SHINRA MAXIMA series uses the sintered and cryogenically hardened Japanese steel SPG2 in 3-layer laminate, one of the best ever produced in Japan
Intended use: sports / collection
Type of production: industrial cutting - handcrafted assembly and finishing
Production Lama: Japan
Blade: 61 / 62HRC SPG-2 stainless steel in three-layer San Mai laminate
Handle: Pakka Wood
Blade length: 95mm.
Blade thickness: 3mm.
Closed length: 115mm.
Total length: 207mm.
Thick when closed: 17.5mm.
Weight: 100g.
Closure: Liner Lock
Clip: in stainless steel
Packaging: cardboard box with Mcusta logos
Note: -For more information on the steel used, you can visit the website: www.collinisteel.com
AP-MC-0203G -
Ontario Knife Company - Old Hickory Butcher Knife - 7113 - knife
Ontario Knife Company - Old Hickory Butcher Knife - 7113 - knife
Known for their robust longevity in countless practical applications, Ontario's famous Old Hickory knives have been a go-to for cooking and outdoor enthusiasts for over 95 years.Intended use: Hiking / Camp / Meat / Barbecue
Type of production: Industrial
Country of production: USA
Blade: carbon steel 1095 57-59 HRC
Blade treatment: satin finish
Handle: wood
Blade length: 360mm.
Blade thickness: 2.5mm.
Total length: 500mm.
Weight: 412g.
Sheath: without sheath
Packaging: without packaging
Notes: To make the knife sharper, through our internal laboratory, we further sharpen each blade before shipping.CARE AND MAINTENANCE: This product uses a NON stainless steel with a high carbon content - it is therefore recommended to wash it under running water and dry it immediately manually with a clean cotton cloth or absorbent paper. To avoid the formation of rust and oxidation it is also highly recommended, after having dried it well, to protect the blade with a lubricant (eg grease, paraffin, lanolin, vaseline) that creates a protective barrier between the steel and the atmosphere.
ON7113 -
Ontario Knife Company - Hunting Knife with leather sheath - 7026 - knife
Known for their robust longevity in countless practical applications, Ontario's famous Old Hickory knives have been a go-to for cooking and outdoor enthusiasts for over 95 years. In line with the Old Hickory design, this hunting knife features a 1095 carbon steel blade and wooden handle, making it perfect for hunting and outdoor use. As with all Old Hickory models, this knife also features a wooden handle with brass rivets. Both the fillet knife and the leather sheath are made in the USA.
Intended use: Fishing / Hunting
Type of production: industrial
Country of production: USA
Blade: carbon steel 1095 57-59 HRC
Blade treatment: satin finish
Handle: wood
Blade length: 140mm.
Blade thickness: 2mm.
Total length: 260mm.
Sheath: in leather
Packaging: Ontario official box
Note: To make the knife sharper, through our in-house laboratory, we further sharpen each blade before shipping.CARE AND MAINTENANCE: it is recommended to wash it under running water and dry it immediately manually with a clean cotton cloth or absorbent paper.
ON7026 -
Ontario Knife Company - Fish and Small Game Knife with leather sheath - 7024 - knife
Known for their rugged longevity in countless practical applications, Ontario's famous Old Hickory knives have been a go-to for cooking and outdoor enthusiasts for over 95 years. This model, thanks to its small size and ease of use, is ideal for processing fish and small game animals. It features an 8.5cm stainless steel blade with a satin finish. As with all Old Hickory models, this knife also features a wooden handle with brass rivets. Both the fillet knife and the leather sheath are made in the USA.
Intended use: Fishing / Hunting
Type of production: Industrial
Country of production: USA
Blade: carbon steel 1095 57-59 HRC
Blade treatment: satin finish
Handle: wood
Blade length: 100mm.
Blade thickness: 2mm.
Total length: 220mm.
Sheath: in leather
Packaging: Ontario official box
Notes: To make the knife sharper, through our internal laboratory, we further sharpen each blade before shipping.CARE AND MAINTENANCE: it is recommended to wash it under running water and immediately dry it manually with a clean cotton cloth or absorbent paper.
ON7024 -
Mcusta - Petit Damascus knife - VG10 steel - Micarta Blue and Black - MC-0212D - knife
Coltelleria Collini is the official distributor for Italy of MCUSTA Japanese knives
Intended use: sports / collection
Type of production: industrial cutting - handcrafted assembly and finishing
Blade: SanMai steel with VG-10 stainless steel edge at 59 / 60HRC and external cheeks in 33-layer nickel damascus
Production Lama: Japan
Handle: Micarta
Blade length: 45mm.
Blade thickness: 3mm.
Closed length: 70mm.
Total length: 118mm.
Balancing: -
Weight: 44g.
Closure: Liner Lock
Clip: in deep pocket steel
Sheath:
Note: -MC-0212D -
Mcusta - Petit Damascus knife - VG10 steel - Micarta Orange and Black - MC-0211D - knife
Coltelleria Collini is the official distributor for Italy of MCUSTA Japanese knives
Intended use: sports / collection
Type of production: industrial cutting - handcrafted assembly and finishing
Blade: SanMai steel with VG-10 stainless steel edge at 59 / 60HRC and external cheeks in 33-layer nickel damascus
Production Lama: Japan
Handle: Micarta
Blade length: 45mm.
Blade thickness: 3mm.
Closed length: 70mm.
Total length: 118mm.
Balancing: -
Weight: 44g.
Closure: Liner Lock
Clip: in deep pocket steel
Sheath:
Note: -MC-0211D -
Mcusta - Yatagarasu collection knife - Limited Edition - MCSY-001 - knife
Extremely limited edition Yatagarasu MCUSTA folding knife of the Shinwa series, with Mokume blade and produced in only 100 pieces.
Yatagarasu, in Japanese culture, is a three-legged crow symbol of driving owned by the Sun goddess Amaterasu. Yatagarasu appears in ancient Japanese documents, such as Kojiki (古 事 記), in which it is also said that he fought and killed a beast intending to devour the Sun, and that he is also the protector of the emperor Jimmu.
On many occasions, in Japanese art this creature is represented with three legs, although in Kojiki it is never said that the Yatagarasu has more than two. Today, the three-legged version of the Yatagarasu is used as a symbol of the football federation of Japan.Intended use: collection
Type of production: industrial cutting - craftsmanship, assembly and finishes
Lama production: Japan
Blade: stainless steel Mokume Damascus - Aogami (blue steel) forged with lamination of rainbow Damascus, obtained thanks to layers of stainless steel, copper and brass and with black hammering through the Tsuchime technique
Handle: in stainless damask with dark purple corian insert and copper and gold inlays
Blade length: 80mm.
Blade thickness: 3mm.
Length closed: 110mm.
Total length: 195mm.
Thick when closed: 14mm.
Weight: 141g.
Closure: Liner Lock
Clip: -
Packaging: wooden box with Mcusta logos
Notes: limited edition 100 piecesFor more information on the steel used you can view the site: www.collinisteel.com
MCSY-001 -
Mcusta - Takeri Shinra Maxima knife - SPG2 Powder Steel - Damascius - MC-0202G - knife
Collini Cutlery is the official distributor for Italy of the Japanese MCUSTA knives
The SHINRA MAXIMA series uses Japanese sintered and cryogenically hardened SPG2 in 3-layer laminate, one of the best ever produced in Japan
Intended use: sports / collection
Type of production: industrial cut - assembly and handmade finishes
Lama production: Japan
Blade: 61 / 62HRC SPG-2 stainless steel in three-layer San Mai laminate
Handle: Damascus
Blade length: 90mm.
Blade thickness: 3mm.
Length closed: 117mm.
Total length: 211mm.
Thick when closed: 17.5mm.
Weight: 170g.
Closure: Liner Lock
Clip: stainless steel
Packaging: cardboard box with Mcusta logos
Note: -For more information on the steel used you can view the site: www.collinisteel.com
MC-0202G -
Mcusta - Shinari Shinra Maxima knife - SPG2 Powder Steel - Green Pakka Wood - MC-0203G - knife
Collini Cutlery is the official distributor for Italy of the Japanese MCUSTA knives
The SHINRA MAXIMA series uses Japanese sintered and cryogenically hardened SPG2 in 3-layer laminate, one of the best ever produced in Japan
Intended use: sports / collection
Type of production: industrial cut - assembly and handmade finishes
Lama production: Japan
Blade: 61 / 62HRC SPG-2 stainless steel in three-layer San Mai laminate
Handle: Pakka wood
Blade length: 95mm.
Blade thickness: 3mm.
Length closed: 115mm.
Total length: 207mm.
Thick when closed: 17.5mm.
Weight: 100g
Closure: Liner Lock
Clip: stainless steel
Packaging: cardboard box with Mcusta logos
Note: -For more information on the steel used you can view the site: www.collinisteel.com
MC-0203G -
Mcusta - Minagi Shinra Maxima knife - SPG2 Powder Steel - Blue Micarta - MC-0201G - knife
Collini Cutlery is the official distributor for Italy of the Japanese MCUSTA knives
The SHINRA MAXIMA series uses Japanese sintered and cryogenically hardened SPG2 in 3-layer laminate, one of the best ever produced in Japan
Intended use: sports / collection
Type of production: industrial cut - assembly and handmade finishes
Lama production: Japan
Blade: 61 / 62HRC SPG-2 stainless steel in three-layer San Mai laminate
Handle: Micarta
Blade length: 90mm.
Blade thickness: 3mm.
Length closed: 117mm.
Total length: 211mm.
Thick when closed: 17.5mm.
Weight: 105g.
Closure: Liner Lock
Clip: stainless steel
Packaging: cardboard box with Mcusta logos
Note: -For more information on the steel used you can view the site: www.collinisteel.com
MC-0201G -
Mcusta - Bamboo knife black pakka wood - SPG2 Powder Steel - MC-0146G - knife
Collini Cutlery is the official distributor for Italy of the Japanese MCUSTA knives
Intended use: dirty / collection
Type of production: industrial cut - assembly and handmade finishes
Blade: SPG2 61 / 62HRC
Blade treatment: -
Lama production: Japan
Handle: damask steel and pakka wood
Blade length: 70mm.
Blade thickness: 3mm.
Length closed: 96mm.
Total length: 166mm.
Balancing: -
Weight: 96g.
Closure: Liner Lock
Clip: -
Sheath: cordura
Note: -MC-0146G -
Mcusta - Tsuchi Damascus knife - Shinra Iron Wood - MC-0077DI - knife
Collini Cutlery is the official distributor of MCUSTA Japanese knives for Italy
Intended use: sports / collection
Type of production: industrial cutting - craft assembly and finishing
Blade: in SanMai steel with VG-10 stainless steel cutting edge at 59 / 60HRC and outer cheeks in 33-layer nickel damask
Production Lama: Japan
Handle: Iron Wood
Blade length: 70mm.
Blade thickness: 3mm.
Length closed: 95mm.
Total length: 167mm.
Balancing: -
Weight: 66g.
Closure: Liner Lock
Clip: -
Sheath: fabric bag
Note: -MC-0077DI -
Mcusta - Tsuchi Damascus knife - MC-0114D - Forge Series - knife
Collini Cutlery is the official distributor of MCUSTA Japanese knives for Italy
Intended use: sports / collection
Type of production: industrial cutting - craft assembly and finishing
Production Lama: Japan
Blade: in damask laminated and hammered stainless steel with cutting edge in VG-10 at 59 / 60HRC
Handle: Stainless Steel
Blade length: 85mm.
Blade thickness: 3mm.
Length closed: 112mm.
Total length: 192mm.
Thick when closed: 8mm.
Weight: 114g.
Closure: Frame Lock
Clip: in stainless steel
Packaging: cardboard box with Mcusta logos
Note: -MC-0114D -
Mcusta - Elite Tactility knife - SPG2 Powder Steel - Iron Wood - MC-0125G - knife
Collini Cutlery is the official distributor of MCUSTA Japanese knives for Italy
The Sengoku series uses 3-layer SPG2 sintered and cryogenically hardened Japanese steel, one of the best ever produced in Japan
Intended use: sports / collection
Type of production: industrial cutting - craft assembly and finishing
Production Lama: Japan
Blade: in SPG-2 stainless steel at 61 / 62HRC in San Mai three-layer laminate
Handle: Iron Wood
Blade length: 95mm.
Blade thickness: 3mm.
Length closed: 115mm.
Total length: 207mm.
Thick when closed: 17.5mm.
Weight: 100g.
Closure: Liner Lock
Clip: in stainless steel
Packaging: cardboard box with Mcusta logos
Note: -For more information on the steel used, you can view the site: www.collinisteel.com
MC-0125G -
Mcusta - Elite Tactility knife - SPG2 Powder Steel - Corian - MC-0126G - knife
Collini Cutlery is the official distributor of MCUSTA Japanese knives for Italy
The Sengoku series uses 3-layer SPG2 sintered and cryogenically hardened Japanese steel, one of the best ever produced in Japan
Intended use: sports / collection
Type of production: industrial cutting - craft assembly and finishing
Production Lama: Japan
Blade: in SPG-2 stainless steel at 61 / 62HRC in San Mai three-layer laminate
Handle: Corian
Blade length: 95mm.
Blade thickness: 3mm.
Length closed: 115mm.
Total length: 207mm.
Thick when closed: 17.5mm.
Weight: 100g.
Closure: Liner Lock
Clip: in stainless steel
Packaging: cardboard box with Mcusta logos
Note: -For more information on the steel used, you can view the site: www.collinisteel.com
MC-0126G -
Mcusta - Elite Tactility knife - SPG2 Steel Powder - Micarta Series - MC-0121G - knife
Collini Cutlery is the official distributor of MCUSTA Japanese knives for Italy
The Sengoku series uses 3-layer SPG2 sintered and cryogenically hardened Japanese steel, one of the best ever produced in Japan
Intended use: sports / collection
Type of production: industrial cutting - craft assembly and finishing
Production Lama: Japan
Blade: in SPG-2 stainless steel at 61 / 62HRC in San Mai three-layer laminate
Handle: Micarta
Blade length: 95mm.
Blade thickness: 3mm.
Length closed: 115mm.
Total length: 207mm.
Thick when closed: 17.5mm.
Weight: 100g.
Closure: Liner Lock
Clip: in stainless steel
Packaging: cardboard box with Mcusta logos
Note: -For more information on the steel used, you can view the site: www.collinisteel.com
MC-0121G -
Mcusta - Toyotomi Hideyoshi MC-0182G knife - SPG2 Powder Steel - Sengoku Series - knife
Collini Cutlery is the official distributor of MCUSTA Japanese knives for Italy
The Sengoku series uses 3-layer SPG2 powder steel and cryogenically hardened Japanese steel, one of the best ever produced in Japan
Intended use: sports / collection
Type of production: industrial cutting - craft assembly and finishing
Production Lama: Japan
Blade: stainless steel SPG-2 at 61 / 62HRC
Handle: Pakka Wood
Blade length: 93mm.
Blade thickness: 3mm.
Length closed: 117mm.
Total length: 210mm.
Thick when closed: 17.5mm.
Weight: 120g.
Closure: Liner Lock
Clip: -
Packaging: cardboard box with Mcusta logos
Notes: cordura sheath and leatherMC-0182G -
Mcusta - Oda Nobunaga MC-0181G - SPG2 Powder Steel - Sengoku Series - knife
Intended use: sporting/collection
Type of production: industrial cut - handcrafted assembling and finishing
Blade production: Japan
Blade: SPG-2 stainless steel at 61/62HRC in three layers San Mai laminate
Handle: Micarta
Blade length: 93mm.
Blade thickness: 3mm.
Length closed: 117mm.
Total length: 210mm.
Thickness when closed: 17.5mm.
Weight: 120g.
Closure: Liner Lock
Clip: -
Package: cardboard box with Mcusta logos
Notes: Cordura and leather sheathMC-0181G -
Ontario Knife Company - Cerberus Titanium Folder - 1776 - knife
Intended use: Sportsman / Utility
Type of production: Industrial
Country of production: Taiwan
Blade: in steel tool D2
Blade treatment: Satin
Handle: Titanium
Blade length: 105mm.
Blade thickness: 3mm.
Closed length: 140mm.
Total length: 235mm.
Thick when closed: 13.8mm.
Weight: 172g.
Opening: through thumbstood, ambidextrous
Washers: in Teflon
Closure: Frame Lock with stainless steel leaf
Clip: stainless steel, deep pocket type, reversible and removable
Packaging: Cardboard box with Ontario Knife Company logos
Note: -ON1776 -
Ontario Knife Company - Carter 2Quared Titanium Flipper - 8876 - knife
Intended use: Sportsman / Utility
Type of production: Industrial
Country of production: Taiwan
Blade: in steel tool D2
Blade treatment: Blackwashed
Handle: Titanium
Blade length: 90mm.
Blade thickness: 5mm.
Length closed: 123mm.
Total length: 213mm.
Thick when closed: 14.5mm.
Weight: 176g.
Opening: Carson Flipper system
Washers: in steel, with ball bearings
Closure: Frame Lock with stainless steel leaf
Clip: titanium, machined from solid, removable
Packaging: Cardboard box with Ontario Knife Company logos
Notes: Design by Robert CarterON8876 -
Ontario Knife Company - Bushcraft Utility Knife - 8698 - knife
Intended use: Hiking / Hunting
Type of production: Industrial
Country of production: USA
Blade: full tang in 5160 carbon steel
Blade treatment: satin finish
Handle: walnut wood
Blade length: 103mm.
Blade thickness: 3mm.
Total length: 235mm.
Balancing: set back
Weight: 176g.
Sheath: nylon, M.O.L.L.E compatible, rigid polypropylene insert
Packaging: Cardboard box with OKC logos
Note: -ON8698 -
Leatherman - Skeletool KB - folding knife
Intended use: Sports
Type of production: Industrial
Country of production: USA
Blade: 420HC stainless steel
Blade treatment: Satind
Handle: 6061-T6 aluminum
Blade length: 66mm.
Blade thickness: 2.6mm.
Length closed: 87mm.
Overall length: 151mm.
Thick when closed: 11mm.
Balancing: -
Weight: 38g.
Opening: hole on the blade
Washers: in brass
Closure: Liner Lock
Clip: stainless steel, removable, with the function of a bottle opener
Sheath: -
Packaging: Cardboard box with Leatherman logos
Note: -LE832385 -
Mcusta - MC-192C Slip Joint Knife Black / Yellow - knife
Collini Cutlery is the official distributor for Italy of MCUSTA Japanese knives
Destination of use: sport / collection
Type of production: industrial cutting - assembly and artisan finishes
Lama production: Japan
Blade: in laminated stainless steel damascus with cutting edge in VG-10 at 59 / 60HRC
Handle: wood
Blade length: 85mm.
Blade thickness: 3mm.
Length closed: 110mm.
Total length: 195mm.
Thick when closed: 12mm.
Weight: 78g.
Closure: Joint Slip
Clip: -
Packaging: cardboard box with Mcusta logos with fabric sheath
Note: -MC-192C -
Mcusta - Sengoku Damascus - MC-0182D Toyotomi Hideyoshi - knife
Intended Use: sport / collection
Type of production: Industrial cutting - assembly and handcrafted finishes
Production Lama: Japan
Blade: stainless steel sanmai with sharp VG-10 to 59 / 60HRC and External cheeks damask nickel to 33 layers
Handle: Micarta
Blade length: 93mm.
Blade thickness: 3mm.
Closed Length: 117mm.
Overall length: 210mm.
Thick when closed: 17.5mm.
Weight: 120g.
Lock: Liner Lock
Clips: stainless steel
Packaging: cardboard box with logos Mcusta
Notes: Cordura sheath and leatherMC-0182D -
Mcusta - Sengoku VG10 knife - MC-0181 Oda Nobunaga - knife
Mcusta - Sengoku VG10 knife - MC-0181 Oda Nobunaga - knife
Intended Use: sport / collection
Type of production: Industrial cutting - assembly and handcrafted finishes
Production Lama: Japan
Blade: Stainless Steel VG-10 to 59 / 60HRC
Handle: Black Micarta
Blade length: 93mm.
Blade thickness: 3mm.
Closed Length: 117mm.
Overall length: 210mm.
Thick when closed: 17.5mm.
Weight: 120g.
Lock: Liner Lock
Clips: stainless steel
Packaging: cardboard box with logos Mcusta
Notes: Cordura sheath and leatherMC-0181 -
Mcusta - Sengoku Damascus knife - MC-0181D Oda Nobunaga - knife
Mcusta - Sengoku Damascus knife - MC-0181D Oda Nobunaga - knife
Intended Use: sport / collection
Type of production: Industrial cutting - assembly and handcrafted finishes
Production Lama: Japan
Blade: stainless steel sanmai with sharp VG-10 to 59 / 60HRC and External cheeks damask nickel to 33 layers
Handle: Black Micarta
Blade length: 93mm.
Blade thickness: 3mm.
Closed Length: 117mm.
Overall length: 210mm.
Thick when closed: 17.5mm.
Weight: 120g.
Lock: Liner Lock
Clips: stainless steel
Packaging: cardboard box with logos Mcusta
Notes: Cordura sheath and leatherMC-0181D -
Mcusta - Basic White Series Damascus - MC0025D - knife
Intended use: Sports / Collection
Type of production: Industrial cutting - assembly and handcrafted finishes
Production Lama: Japan
Blade: sanmai sharp stainless steel with VG-10 59 / 60HRC and External cheeks damask nickel to 33 layers
Blade treatment: -
Handle: Corian
Blade length: 87mm.
Blade Thickness: 3mm.
Closed Length: 110mm.
Overall length: 193mm.
Balancing: -
Weight: 98g.
Lock: Liner Lock
Clip: Steel
Sheath: -
Notes: -MC0025D -
Mcusta - Series Katana - MC-0041C - knife
Mcusta - Series Katana - MC-0041C - knife
Intended use: sports / collection
Type of production: industrial cutting - assembly and handcrafted finishes
Production Lama: Japan
Blade: laminated steel with sharp VG-10 to 59/60 HRC
Handle: Aluminum
Blade length: 80mm.
Blade thickness: 3mm.
Closed Length: 110mm.
Overall length: 194mm.
Thick when closed: 14mm.
Weight: 96g.
Lock: Liner Lock
Clip: Stainless Steel
Packaging: cardboard box with logos Mcusta
Notes: -MC-0041C -
Mcusta - Date Masamune MC-0186G knife - SPG2 Powder Steel - Sengoku Series - knife
Collini Cutlery is the official distributor of MCUSTA Japanese knives for Italy
The Sengoku series uses 3-layer SPG2 powder steel and cryogenically hardened Japanese steel, one of the best ever produced in Japan
Intended use: sports / collection
Type of production: industrial cutting - craft assembly and finishing
Production Lama: Japan
Blade: stainless steel SPG-2 at 61 / 62HRC
Handle: Pakka Wood
Blade length: 93mm.
Blade thickness: 3mm.
Length closed: 117mm.
Total length: 210mm.
Thick when closed: 17.5mm.
Weight: 120g.
Closure: Liner Lock
Clip: -
Packaging: cardboard box with Mcusta logos
Notes: -MC-0186G -
Mcusta - Basic Series Rosewood - MC-0014R - knife
Mcusta - Basic Series Rosewood - MC-0014R - knife
Intended use: Sport
Type of production: Industrial
Production Lama: Japan
Blade: Stainless VG-10
Treatment Lama: Satin
Handle: Rosewood wood
Blade length: 85mm.
Blade thickness: 3mm.
Closed Length: 110mm.
Overall length: 190mm.
Thick when closed: 15mm.
Balancing: -
Weight: 96g.
Lock: Liner Lock
Clip: Stainless Steel
Sheath: -
Packing: brown cardboard box with logos Mcusta
Notes: -MC-0014R -
Mcusta - Turo Take Dark Wood Money Clip MC-0151 Japan - knife
Mcusta - Turo Take Dark Wood Money Clip MC-0151 Japan - knife
Intended use: sports / collection / money clip
Type of production: industrial cutting - assembly and handcrafted finishes
Blade: AUS-8 stainless
Production Lama: Japan
Handle material: steel and ebony
Blade length: 55mm.
Blade Thickness: 2mm.
Closed Length: 76mm.
Overall length: 135mm.
Balancing: -
Weight: 34g.
Closure: Slip joint
Clip: present
Sheath: -
Notes: -MC-0151 -
Mcusta - Susu-Take Money Clip MC-0152 Japan - knife
Mcusta - Susu-Take Money Clip MC-0152 Japan - knife
Intended use: sports / collection / money clip
Type of production: industrial cutting - assembly and handcrafted finishes
Blade: AUS-8 stainless
Production Lama: Japan
Handle: Steel and Red pakkawood
Blade length: 55mm.
Blade Thickness: 2mm.
Closed Length: 76mm.
Overall length: 135mm.
Balancing: -
Weight: 34g.
Closure: Slip joint
Clip: present
Sheath: -
Notes: -MC-0152 -
Mcusta - Tsuchi Green - MC-163D - knife
Mcusta - Tsuchi Green - MC-163D - knife
Type of production: industrial cutting - assembly and handcrafted finishes
Production Lama: Japan
Blade: Damascus steel rolled and hammered with sharp VG-10 to 59/60 HRC
Handle: Aluminum
Blade length: 85mm.
Blade thickness: 3mm.
Closed Length: 110mm.
Overall length: 190mm.
Thick when closed: 14mm.
Weight: 94g.
Lock: Liner Lock
Clip: Stainless Steel
Packaging: cardboard box with logos Mcusta
Notes: -MC-0163D -
Mcusta - Fuji Kamon Crest - Japan Damascus - MC-0094D - knife
Cutlery Collini is the official distributor for Italy of Japanese knives Mcusta
Intended use: sports / collection
Type of production: industrial cutting - assembly and handcrafted finishes
Blade: Stainless sanmai with sharp steel VG-10 to 59/60 HRC and cheeks outside Damascus nickel to 33 layers
Production Lama: Japan
Handle material: stainless steel
Blade length: 70mm.
Blade Thickness: 3mm.
Closed Length: 95mm.
Overall length: 164mm.
Balancing: -
Weight: 90g.
Lock: Liner Lock
Clip: -
Sheath: Belt, Nylon, with traditional motifs
Notes: -12015 -
Mcusta - Aoi Kamon Crest - Japan Damascus - MC-0091D - knife
Cutlery Collini is the official distributor for Italy of Japanese knives Mcusta
Intended use: sports / collection
Type of production: industrial cutting - assembly and handcrafted finishes
Blade: Stainless sanmai with sharp steel VG-10 to 59/60 HRC and cheeks outside Damascus nickel to 33 layers
Production Lama: Japan
Handle material: stainless steel
Blade length: 70mm.
Blade Thickness: 3mm.
Closed Length: 95mm.
Overall length: 164mm.
Balancing: -
Weight: 90g.
Lock: Liner Lock
Clip: -
Sheath: Belt, Nylon, with traditional motifs
Notes: -12014 -
Mcusta - Ao-Take Money Clip MC-0154 - knife
Mcusta - Ao-Take Money Clip MC-0154 - knife
Collini Cutlery is the official distributor for Italy of Japanese knives Mcusta
Intended Use: Sport / collection / money clip
Type of production: industrial cutting - assembly and handcrafted finishes
Blade: steel AUS-8
Blade Production: Japan
Handle material: stainless steel and green micarta
Blade length: 55mm.
Blade Thickness: 2mm.
Closed Length: 76mm.
Overall length: 135mm.
Balancing: -
Weight: 34g.
Closure: Slip joint
Clip this
Sheath: -
Notes: -MC-0154 -
Mcusta - Jazz Knife Damascus Cocobolo Ebony African MC-0171D - knife
Mcusta - Jazz Knife Damascus Cocobolo Ebony African MC-0171D - knife
Collini Cutlery is the official distributor for Italy of Japanese knives Mcusta
Intended use: sporivo / collection
Type of production: industrial cutting - assembly and handcrafted finishes
Blade: VG-10 59/60HRC
Treatment Blade: -
Blade Production: Japan
Handle: wood cocobolo and ebony wood african with steel insert
Blade length: 80mm.
Blade Thickness: 3mm.
Closed Length: 110mm.
Overall length: 193mm.
Balancing: -
Weight: 90g.
Lock: Liner Lock
Clip this
Sheath: Cordura
Notes: -MC-0171D -
Mcusta - Teana knife - Shinra Mixture - SPG2 Powder Steel - MC-0143G - knife
Coltelleria Collini is the official distributor for Italy of the Japanese MCUSTA knives
Intended use: dirty / collection
Type of production: industrial cut - assembly and handmade finishes
Blade: SPG2 61 / 62HRC
Blade treatment: -
Lama production: Japan
Handle: satin steel and wooden insert
Blade length: 70mm.
Blade thickness: 3mm.
Length closed: 96mm.
Total length: 168mm.
Balancing: -
Weight: 82g.
Closure: Liner Lock
Clip: present
Sheath: cordura
Note: -MC-0143G -
Mcusta - Riple knife - MC-0142 - knife
Mcusta - Riple knife - MC-0142 - knife
Collini Cutlery is the official distributor for Italy of Japanese knives Mcusta
Intended use: sporivo / collection
Type of production: industrial cutting - assembly and handcrafted finishes
Blade: VG-10 59/60HRC
Treatment Blade: -
Blade Production: Japan
Handle material: stainless steel satin and ebony inlay
Blade length: 70mm.
Blade Thickness: 3mm.
Closed Length: 96mm.
Overall length: 166mm.
Balancing: -
Weight: 86g.
Lock: Liner Lock
Clip: -
Sheath: Cordura
Notes: -MC-0142 -
Mcusta - Mari Damascus Japan - MC-0036D - knife
Mcusta - Mari Damascus Japan - MC-0036D - knife
Collini Cutlery is the official distributor for Italy of Japanese knives Mcusta
Intended Use: Sport / collection
Type of production: industrial cutting - assembly and handcrafted finishes
Blade: Stainless steel sanmai with sharp VG-10 to 59/60HRC cheeks and external nickel damascus 33 layers
Blade Production: Japan
Handle: damascus steel
Blade length: 70mm.
Blade Thickness: 3mm.
Closed Length: 95mm.
Overall length: 164mm.
Balancing: -
Weight: 84g.
Lock: Liner Lock
Clip: -
Sheath: -
Notes: -MC-0036