Knives, collection knife, tactical knives, outdoor knives, pocket knives and tools

Ontario Knife Company - Old Hickory Butcher Knife - 7113 - knife
Known for their robust longevity in countless practical applications, Ontario's famous Old Hickory knives have been a go-to for cooking and outdoor enthusiasts for over 95 years.

Intended use: Hiking / Camp / Meat / Barbecue

Type of production: Industrial
Country of production: USA
Blade: carbon steel 1095 57-59 HRC
Blade treatment: satin finish
Handle: wood
Blade length: 360mm.
Blade thickness: 2.5mm.
Total length: 500mm.
Weight: 412g.
Sheath: without sheath
Packaging: without packaging
Notes: To make the knife sharper, through our internal laboratory, we further sharpen each blade before shipping.

CARE AND MAINTENANCE: This product uses a NON stainless steel with a high carbon content - it is therefore recommended to wash it under running water and dry it immediately manually with a clean cotton cloth or absorbent paper. To avoid the formation of rust and oxidation it is also highly recommended, after having dried it well, to protect the blade with a lubricant (eg grease, paraffin, lanolin, vaseline) that creates a protective barrier between the steel and the atmosphere.

Intended use: Hiking / Hunting

Type of production: Industrial
Country of production: USA
Blade: full tang in 5160 carbon steel
Blade treatment: satin finish
Handle: walnut wood
Blade length: 103mm.
Blade thickness: 3mm.
Total length: 235mm.
Balancing: set back
Weight: 176g.
Sheath: nylon, M.O.L.L.E compatible, rigid polypropylene insert
Packaging: Cardboard box with OKC logos
Note: -

Opinel - Collection Set 10 pieces - stainless steel blade - knife

Invented in 1890 and still today produced in Savoy, the pocket knife Opinel is famous worldwide.

Collection Set of 10 pieces 2-12

Type of production: Industrial
Production Lama France
Blade: stainless steel Sandvik 12C27
Blade treatment: Satin
Handle: Wood
Packaging: Wooden box with logos Opinel

This small titanium folder is the result of a desire by Spartan Blade to produce a high quality slip joint folder using as few small moving parts as possible. While attending the 2012 IWA Show in Germany, we spoke with several people who simply couldn’t own one of our larger folders due to the restrictions of knives with locks, one handed opening, and long blades. During the show, Mark and Curtis were visiting the Nuremburg Toy Museum and were impressed by some of the very small high-tech mechanisms used to make toys. It was then the idea hit them to make a slip joint that didn’t require several small fine blanked parts, allowing for a more modern look and function than the classic slipjoint. Now they had a great idea but not the full mechanism to make it work.

Later, Spartan met with Les Halpern of Halpern Titanium and explained their idea for a small modern slip joint. He became very excited as he had an idea for a similar knife using what he called “A good idea” for a mechanism. Les did some drawings explaining his idea for eliminating the traditional back spring. Normally, slip joint blades are held in position by a strong "back spring" which assists them with bias to the open or closed position. Les’ idea was to make the frame the spring with the same bias in open or closed position.

This folder eliminates the need for a back spring by using what we call an “Integral Frame Slipjoint”, the dorsal side of the frame is cut to work as a spring and holds a pin that creates a bias to close and open. The blade is opened by pushing on the tab on the blade (it is not a flipper tab!) with one hand and pulling with the thumb and forefinger on the triangle cut-out of the opposite side and hand. Additionally, the pin "locks" into the blade when held firmly by the users thumb and forefinger in in position of use but is free to rotate upon release of the frame handle.

Intended use: Sport / Collection
Production Type: Semi-Industrial
Production Lama USA
Blade: stainless steel CPM-S35VN
Treatment Lama: stonewash
Handle: titanio
Blade length: 48mm.
Blade thickness: 2 mm.
Closed Length: 74mm
Overall length: 121mm.
Thick when closed: 7mm
Balancing: -
Weight: 36g.
Closing: Integral Frame Slipjoint (opening and closing two-handed block blade)
Clip: Titanium
Sheath: -
Packaging: Cardboard box with logos Spartan Blades
Notes: WINNER - BLADE 2014 Most Innovative American Made Knife of the Year

Destinazione d'uso: Tattico / Collezione

Tipo di produzione: Industriale
Produzione Lama: USA
Lama: In acciaio inox 440A
Trattamento Lama: -
Manicatura: Anelli di cuoio
Lunghezza lama: 150mm.
Spessore lama: 4.5mm.
Lunghezza totale: 270mm.
Bilanciatura: -
Peso: 264g.
Fodero: Cuoio Marrone
Confezione: scatola in cartone con loghi Ontario
Note: -

Ontario - P4 USMC Combat knife -

Intended Use: Tactical / Collection

Type of production: Industrial
Production Lama USA
Blade: 440A stainless steel
Treatment Lama: -
Handle material: leather rings
Blade length: 180mm.
Blade thickness: 4mm.
Total length: 310mm.
Balance: -
Weight: 290g.
Sheath: Leather Brown
Packaging: cardboard box with logos Ontario
Notes: -