Knives, collection knife, tactical knives, outdoor knives, pocket knives and tools
-
Kershaw - Frontrunner - KVT Flipper - 2039 - knife
Intended Use: Sporting
Production type: Industrial
Country of Production: China
Blade: D2 steel
Blade treatment: Stonewashed
Handle: Stainless steel and G10
Blade length: 74mm.
Blade thickness: 3.1mm.
Length closed: 109mm.
Total length: 183mm.
Thickness when closed: 13mm.
Weight: 119g.
Opening: rapid Carson Flipper system
Washers: with KVT ball bearings
Closure: FrameLock
Clip: deep pocket, stainless steel, removable
Packaging: cardboard box with Kershaw logos
Notes: Opening via Carson-flipper system on KVT ball bearingsK2039 -
Kershaw - Highball XL KVT Knife - 7020 - D2 steel - knife
Intended use: Sports
Type of production: Industrial
Country of production: China
Blade: D2 steel
Blade treatment: Stonewashed
Handle: Stainless steel with Stonewashed and G10 finish
Blade length: 84mm.
Blade thickness: 3mm.
Closed length: 110mm.
Total length: 190mm.
Weight: 108g.
Opening: KVT Bearings system
Washers: in reversible steel
Closure: Frame Lock
Clip: in stainless steel, removable and reversible
Packaging: Cardboard box with Kershaw logos
Note: -K7020 -
Higonokami - Kanekoma knife - Black Small Pocket Knife Japan
Charming knife used by the Japanese farmer.
As is typical for many agricultural tools, this Japanese knife is also extremely simple but the result of a centuries-old improvement that has found the difficult balance between form and function, and between cost and benefit.
The main feature is certainly the quality of the blade, in fact it uses a three-layer San Mai steel, of which the very hard one in the center.
It has a razor wire, as befits a tool created to cut and not just to be displayed in display cases.
Blade: San Mai carbon steel - Yasuki Steel Blue Paper Steel 62hrc in clad
Handle: iron foil
Closing: without blade lock
Length closed: 92mm.
Blade length: 76mm.
Blade thickness: 2.7mm
Open length: 155mm
Weight: 33g.
Note:HIGO-06BL€21.31Only 11 left -
Kershaw - Tumbler Flipper by Sinkevich - 4038 - knife
Intended use: Sports
Type of production: Industrial
Country of production: China
Blade: in steel D2
Blade treatment: Stonewashed
Handle: G10 and Carbon Fiber
Blade length: 83mm.
Blade thickness: 3mm.
Length closed: 114mm.
Total length: 187mm.
Thick when closed: 11mm.
Weight: 75g.
Opening: Carson Flipper system
Washers: in steel, with ball bearings
Closing: Sub Frame Lock
Clip: stainless steel, removable and reversible
Packaging: Cardboard box with Kershaw logos
Notes: Design by SinkevichK4038 -
Kershaw - Oblivion SpeedSafe Frame Flipper - 3860 - knife
Intended use: Sports
Type of production: Industrial
Country of production: China
Blade: 8Cr13MoV stainless steel
Blade treatment: Stonewashed
Handle: Stainless steel with Stonewashed and G10 finish
Blade length: 90mm.
Blade thickness: 3mm.
Length closed: 118mm.
Total length: 206mm.
Thick when closed: 10.2mm.
Weight: 146g.
Opening: Carson Flipper system and SpeedSafe Assisted Opening
Washers: steel,
Closure: Frame Lock
Clip: stainless steel, removable and reversible
Packaging: Cardboard box with Kershaw logos
Note: -K3860 -
Kershaw - Innuendo Frame by Les George - 3440 - knife
Intended use: Sports
Type of production: Industrial
Country of production: China
Blade: 8Cr13MoV stainless steel
Blade treatment: Gray TiNi
Handle: Stainless steel with bead-blasted finish
Blade length: 85mm.
Blade thickness: 3mm.
Length closed: 108mm.
Total length: 191mm.
Thick when closed: 10mm.
Weight: 127g.
Opening: through ambidextrous opening disc placed on the blade
Washers: in Teflon
Closure: Frame Lock
Clip: stainless steel, removable and reversible, with Gray TiNi treatment
Packaging: Cardboard box with Kershaw logos
Notes: Design by Les GeorgeK3440 -
Kershaw - Decibel Frame Knife - 2045 - knife
Intended use: Sports
Type of production: Industrial
Country of production: China
Blade: 8Cr13MoV stainless steel
Blade treatment: Matte Gray TiNi
Handle: Stainless steel with Matte Gray TiNi finish
Blade length: 74mm.
Blade thickness: 2.5mm.
Length closed: 94mm.
Total length: 178mm.
Thick when closed: 15mm.
Weight: 83g.
Opening: through ambidextrous opening pin placed on the blade
Washers: in Teflon
Closure: Frame Lock
Clip: stainless steel, removable and reversible, with PVD treatment
Packaging: Cardboard box with Kershaw logos
Note: -K2045 -
Kershaw - Parsec Frame Flipper - 2035 - knife
Intended use: Sports
Type of production: Industrial
Country of production: China
Blade: 8Cr13MoV stainless steel
Blade treatment: Stonewashed Brown PVD
Handle: Stainless steel with Stonewashed Brown PVD finish
Blade length: 7.6mm.
Blade thickness: 3mm.
Length closed: 105mm.
Total length: 182mm.
Thick when closed: 10.2mm.
Weight: 99g.
Opening: Carson Flipper system
Washers: in steel, with ball bearings
Closure: Frame Lock
Clip: stainless steel, removable and reversible, with PVD treatment
Packaging: Cardboard box with Kershaw logos
Note: -K2035 -
Kershaw - Reverb XL - 1225 - knife
Intended use: sports
Type of production: Industrial
Country of production: China
Blade: 8Cr13MoV stainless steel
Blade treatment: titanium carbo-nitride coating
Handle: G10 and carbon fiber with stainless steel frame
Blade length: 76mm.
Blade thickness: 2.8mm.
Closed length: 109mm.
Total length: 187mm.
Thick when closed: 9.9mm.
Weight: 62.4g.
Washers: in brass
Closure: Framelock
Clip: deep carry type, stainless steel, removable and reversible
Packaging: Cardboard box with Kershaw logos
Notes: Carabiner / bottle opener integrated on the shankK1225 -
Kershaw - Antic Karambit Style Grip - 8710 - knife
Intended use: Sports / EDC
Type of production: Industrial
Country of production: China
Blade: 8Cr13MoV stainless steel
Blade treatment: Bead Blasted
Handle: Stainless steel with PVD treatment
Blade length: 47mm.
Blade thickness: 2.8mm.
Closed length: 96mm.
Total length: 140mm.
Thick when closed: 8.7mm.
Weight: 90g.
Opening: through ambidextrous thumstood
Washers: in Teflon
Closure: Frame Lock
Clip: stainless steel, removable
Sheath: -
Packaging: Cardboard box with Kershaw logos
Notes: bottle opener and screwdriverK8710 -
Kershaw - Emerson CQC-11K Wave Framelock - 6031 - knife
Intended use: Tactical / EDC
Type of production: industrial
Blade: 8Cr14MoV stainless steel
Blade Treatment: Stone Washed
Blade production: China
Handle: Stainless Steel and G10
Blade Length: 90mm.
Blade thickness: 3mm.
Closed length: 121mm.
Total length: 216mm.
Thickness of handle: 10mm.
Weight: 166g.
Closure: Frame Lock
Clip: removable and reversible, stainless steel
Sheath: -
Notes: Opening through a Wave system or with a spacer opening (removable) - Design by Ernest R. EmersonK6030 -
Kershaw - Hinderer Cryo Flipper Frame G10 - 1555G10 - knife
Intended use: Sport / Tactical / EDC
Type of production: industry
Blade: stainless steel 8Cr13MoV
Treatment Blade: Stonewashed
Production Lama: China
Handle: Stainless steel stonewashed and G10
Blade length: 70mm.
Blade Thickness: 3mm.
Closed Length: 95mm.
Overall length: 165mm.
Balancing: -
Weight: 105g.
Closure: Frame Lock
Clip removable and multi, Teflon-coated stainless steel
Sheath: -
Notes: Design by Rick HindererK1555G10 -
Kershaw - Emerson E-Train Framelock - 6034T - knife
Intended use: Tactical / EDC
Type of production: industrial
Blade: 8Cr14MoV stainless steel
Treatment Lama: -
Production Lama: China
Handle: Stainless steel and G10
Blade length: 83mm.
Blade Thickness: 3mm.
Closed Length: 114mm.
Overall length: 197mm.
Balancing: -
Weight: 144g.
Closure: Frame Lock
Clip: removable and reversible, stainless steel
Sheath: -
Notes: Design by Ernie EmersonK6034TR -
Higonokami - Kanekoma - Miyamoto Musashi M Pocket Knife Japan
Higonokami - Kanekoma - Miyamoto Musashi M Pocket Knife Japan
Blade: Carbon Steel San Mai - Yasuki Steel Blue Paper Steel 60HRC clad in
Handle: iron sheet
Closure: Without lock blade
Closed Length: 97mm.
Blade length: 75mm.
Blade thickness: 3mm
Overall length: 172mm
Weight: 42g.
Notes: Engravings on the handle and the blade. Lubricate the blade otherwise easily subject to oxidation.HIGO07SL€23.77Only 4 left -
Higonokami - Kanekoma - Miyamoto Musashi S Pocket Knife Japan
Higonokami - Kanekoma - Miyamoto Musashi S Pocket Knife Japan
Blade: Carbon Steel San Mai - Yasuki Steel Blue Paper Steel 60HRC clad in
Handle: iron sheet
Closure: Without lock blade
Closed Length: 97mm.
Blade length: 65mm.
Blade thickness: 3mm
Overall length: 153mm
Weight: 46g.
Notes: Engravings on the handle and the blade. Lubricate the blade otherwise easily subject to oxidation.HIGO-06SL€21.31Only 12 left -
Kershaw - Emerson CQC-6K Framelock - knife
Intended use: Tactical / EDC
Type of production: industrial
Blade: 8Cr14MoV stainless steel
Treatment Lama: -
Production Lama: China
Handle: Stainless steel and G10
Blade length: 83mm.
Blade Thickness: 3mm.
Closed Length: 114mm.
Overall length: 197mm.
Balancing: -
Weight: 144g.
Closure: Frame Lock
Clip: removable and reversible, stainless steel
Sheath: -
Notes: Design by Ernie EmersonK6034D2 -
Kershaw - Emerson CQC-7K Framelock - knife
Intended use: Tactical / EDC
Type of production: industrial
Blade: 8Cr14MoV stainless steel
Treatment Lama: -
Production Lama: China
Handle: Stainless steel and G10
Blade length: 83mm.
Blade Thickness: 3mm.
Closed Length: 114mm.
Overall length: 197mm.
Balancing: -
Weight: 144g.
Closure: Frame Lock
Clip: removable and reversible, stainless steel
Sheath: -
Notes: Design by Ernie EmersonK6034T -
Higonokami - Sadakoma Higo in black leather - PRIVATE COLLECTION - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased.
* Condition: Overall in very good condition
* Commercially available: Discontinued
* Sharpening: Factory sharpened
* Marks on blade: None
* Marks on handle: None
* Box: Present
* Scabbard: -
* Manuals, Certificates and Warranties: -
* Checked and Certified by our in-house laboratoryFascinating knife used by the Japanese farmer "Higonokami kanekoma."
As is typical for many agricultural tools, this Japanese knife turns out to be extremely simple but the result of centuries of refinement that has found the difficult balance between form and function, and between cost and benefit.
The main feature definitely turns out to be the quality of the blade, in fact it uses a three-layer San Mai steel of which the one in the center is extremely hard.
Production: Japanese craftsmanship
Blade: San Mai carbon steel - Yasuki Steel Blue Paper Steel 62hrc
Handle: brass foil with elegant black leather cover
Closure: without blade lock
Length closed: 120mm.
Blade length: 90mm.
Blade thickness: 3mm
Length open: 210mm
Weight: 72g.
Notes: lubricate the blade well otherwise easily subject to oxidation.
Packaging: elegant and fine wooden box with Japanese ideograms.018208-CP€0.00Only -20 leftOut of stock -
Kershaw - Iridium - DuraLock KVT Knife - 2038 - knife
Intended Use: Sporting
Production type: Industrial
Country of Production: China
Blade: D2 steel
Blade treatment: Satin finish
Handle: Anodized aluminum
Blade length: 81mm.
Blade thickness: 2.7mm.
Length closed: 114mm.
Total length: 200mm.
Thickness when closed: 12.5mm.
Weight: 94g.
Opening: via ambidextrous pins placed on the blade
Washers: with KVT ball bearings
Closure: DuraLock
Clip: deep pocket, stainless steel, removable and reversible
Packaging: cardboard box with Kershaw logos
Notes: Opens on KVT ball bearings - Uses new patented DuraLock locking system (similar to the AxisLock system used by Benchmade on its folder models)K2038 -
Kershaw - Heist - DuraLock KVT - 2037 - knife
Intended Use: Sporting
Production type: Industrial
Country of Production: China
Blade: D2 steel
Blade treatment: Stonewashed
Handle: GRN (Glass Reinforced Nylon)
Blade length: 81mm.
Blade thickness: 2.3mm.
Length closed: 112mm.
Total length: 193mm.
Thickness when closed: 11.7mm.
Weight: 79g.
Opening: via ambidextrous pins placed on the blade
Washers: with KVT ball bearings
Closure: DuraLock
Clip: deep pocket, stainless steel, removable and reversible
Packaging: cardboard box with Kershaw logos
Notes: Opens on KVT ball bearings - Uses new patented DuraLock locking system (similar to the AxisLock system used by Benchmade on its folder models)K2037 -
Kershaw - Fraxion knife by Anso - Tan - 1160TAN - knife
Intended use: Tactical / Sports
Type of production: Industrial
Country of production: China
Blade: 8Cr13MoV stainless steel
Blade treatment:
Handle: G10 and Carbon Fiber
Blade length: 70mm.
Blade thickness: 2.7mm.
Closed length: 103mm.
Total length: 171mm.
Thick when closed: 9.7mm.
Balancing: -
Weight: 54g.
Opening: Carson Flipper system
Washers: in brass, with ball bearings
Closure: Liner Lock
Clip: in stainless steel, removable and reversible
Sheath: -
Packaging: Cardboard box with Kershaw logos
Notes: Design by Jens AnsoK1160TAN -
Higonokami - Kanekoma knife - Black Medium Pocket Knife Japan
Charming knife used by the Japanese farmer.
As is typical for many agricultural implements, this Japanese knife is also extremely simple but the result of a centuries-old improvement that has found the difficult balance between form and function, and between cost and benefit.
The main feature is certainly the quality of the blade, in fact it uses a three-layer San Mai steel, of which the very hard one in the center.
It has a razor wire, as befits a tool created to cut and not just to be displayed in display cases.
Blade: San Mai carbon steel - Yasuki Steel Blue Paper Steel 62hrc in clad
Handle: iron foil
Closing: without blade lock
Length closed: 11mm.
Blade length: 72mm.
Blade thickness: 2.7mm
Open length: 170mm
Weight: 42g.
Note:HIGO-07BL€23.77Only 0 leftOut of stock -
Kershaw - Lucha Bali - Clip Point Stainless Steel - 5150 - knife
*** ATTENTION: PAYMENT OF THIS ITEM CANNOT BE MADE WITH PAYPAL ***
Intended use: sports
Type of production: Industrial
Country of production: USA
Blade: Sandvik 14C28N stainless steel
Blade treatment: Stonewashed
Handle: Stainless steel
Blade length: 117mm.
Blade thickness: 4mm.
Length closed: 150mm.
Total length: 260mm.
Weight: 168g.
Closing: T-latch
Clip: Absent
Sheath: Absent
Packaging: Cardboard box with Kershaw logos
Notes: Movement on KVT ball bearingsK5150 -
Kershaw - Mixtape G10 Liner Knife - 2050 - knife
Intended use: Sports
Type of production: Industrial
Country of production: China
Blade: 8Cr13MoV stainless steel
Blade treatment: Stonewashed
Handle: G10 with steel folders
Blade length: 86mm.
Blade thickness: 2.5mm.
Length closed: 104mm.
Total length: 181mm.
Thick when closed: 16mm.
Weight: 75g.
Opening: through ambidextrous opening disc placed on the blade
Washers: in brass
Closure: Liner Lock
Clip: stainless steel, with stonewashed treatment
Packaging: Cardboard box with Kershaw logos
Note:K2050 -
Kershaw - Atmos by Sinkevich - Flipper Knife - 4037 - knife
Intended use: Tactical / Sports
Type of production: Industrial
Country of production: China
Blade: 8Cr13MoV stainless steel
Blade treatment: Satin
Handle: G10 and carbon fiber
Blade length: 76mm.
Blade thickness: 2.7mm.
Length closed: 102mm.
Total length: 175mm.
Thick when closed: 11mm.
Weight: 53.9g.
Opening: Carson Flipper system
Washers: Teflon, with ball bearings
Closure: Liner Lock
Clip: stainless steel, removable, reversible, deep pocket type
Packaging: Cardboard box with Kershaw logos
Notes: Design by SinkevichK4037 -
Kershaw - Bareknuckle Flipper Folder - 7777 - knife
Intended use: Sports / Tactical
Type of production: Industrial
Country of production: USA
Blade: Sandvik 14C28N stainless steel
Blade treatment: Stonewashed
Handle: 6061-T6 anodised aeronautical aluminum
Blade length: 89mm.
Blade thickness: 3mm.
Length closed: 118mm.
Total length: 207mm.
Thick when closed: 11.5mm.
Weight: 96.4g.
Closure: Sub FrameLock
Clip: Removable and multiposition, in stainless steel
Packaging: cardboard box with Kershaw logos
Notes: Carson Flipper opening systemK7777 -
Leatherman - Skeletool KB - folding knife
Intended use: Sports
Type of production: Industrial
Country of production: USA
Blade: 420HC stainless steel
Blade treatment: Satind
Handle: 6061-T6 aluminum
Blade length: 66mm.
Blade thickness: 2.6mm.
Length closed: 87mm.
Overall length: 151mm.
Thick when closed: 11mm.
Balancing: -
Weight: 38g.
Opening: hole on the blade
Washers: in brass
Closure: Liner Lock
Clip: stainless steel, removable, with the function of a bottle opener
Sheath: -
Packaging: Cardboard box with Leatherman logos
Note: -LE832385 -
Kershaw - Emerson CQC-11K Wave Framelock - 6031 - knife
Intended use: Tactical / EDC
Type of production: industrial
Blade: 8Cr14MoV stainless steel
Blade Treatment: Stone Washed
Blade production: China
Handle: Stainless Steel and G10
Blade Length: 90mm.
Blade thickness: 3mm.
Closed length: 121mm.
Total length: 216mm.
Thickness of handle: 10mm.
Weight: 166g.
Closure: Frame Lock
Clip: removable and reversible, stainless steel
Sheath: -
Notes: Opening through a Wave system or with a spacer opening (removable) - Design by Ernest R. EmersonK6031 -
Kershaw - Junkyard Dog II Composite - 1752CB - knife
Intended use: Sport / EDC
Type of production: industry
Blade: stainless steel with sharp 14C28N in CPM-D2
Blade treatment: -
Production Lama USA
Handle: G10
Blade length: 92mm.
Blade Thickness: 3mm.
Length closed: 125mm.
Overall length: 216mm.
Balancing: -
Weight: 165g.
Lock: Liner Lock
Clip: Removable stainless steel Teflon
Sheath: -
Notes: opening by flipper12454 -
Quartermaster - QSE-5RS - Mr. Roper Rubbed Steel - Knife
Use: Tactical / EDC
Type of production: Industrial
Production Blade: 100% USA
Blade: Stainless steel sintered CPM-154CM
Treatment Blade: Stone Washed
Handle: Titanium brushed
Blade length: 76mm.
Blade thickness: 4.7mm.
Overall length: 190mm.
Thickness when folded: 12mm.
Balancing: -
Weight: 115g.
Lock: Frame Lock
Clip: Removable and reversible, stainless steel
Sheath: -
Packaging: Cardboard box with logos Quartermaster
Notes: Specimen edition liminata individually numbered on the blade and box12071€0.00Only -99 leftOut of stock -
Quartermaster - QSE-2MV - Ricardo Tubbs Screen Printed - knife
Intended use: Tactical
Type of production: Industrial
Production Lama: 100% USA
Blade: stainless steel sintered CPM-S35VN
Treatment Lama: -
Handle: G-10 and stainless steel
Blade length: 101mm.
Blade thickness: 4.5mm.
Overall length: 223mm.
Thick when closed: 14mm.
Balancing: -
Weight: 210g.
Closure: Frame Lock
Clip: Removable and reversible, stainless steel
Sheath: -
Packaging: Cardboard box with logos Quartermaster
Note: Opening system on ball bearings ORB Pivot System - Exemplary liminata edition individually numbered on the blade and box12070€270.49Out of stock -
Quartermaster - QSE-3 - Sonny Crockett - knife
Intended use: Tactical
Type of production: Industrial
Production Lama: 100% USA
Blade: stainless steel sintered CPM-S35VN
Treatment Lama: -
Handle: G-10 and stainless steel
Blade length: 101mm.
Blade thickness: 4.5mm.
Overall length: 223mm.
Thick when closed: 14mm.
Balancing: -
Weight: 210g.
Closure: Frame Lock
Clip: Removable and reversible, stainless steel
Sheath: -
Packaging: Cardboard box with logos Quartermaster
Note: Opening system on ball bearings ORB Pivot System - Exemplary liminata edition individually numbered on the blade and box12048€229.51Out of stock -
Quartermaster - QSA-1 - Boss Hog - knife
Intended use: Tactical
Type of production: Industrial
Production Lama: 100% USA
Blade: stainless steel sintered CPM-154CM
Treatment Lama: -
Handle: G-10 and stainless steel
Blade length: 101mm.
Blade thickness: 5mm.
Overall length: 260mm.
Thick when closed: 16.5mm.
Balancing: -
Weight: 284g.
Closure: Frame Lock
Clip: Removable and reversible, stainless steel
Sheath: -
Packaging: Cardboard box with logos Quartermaster
Note: Opening system on ball bearings ORB Pivot System - Exemplary liminata edition individually numbered on the blade and box12047€241.80Out of stock -
Quartermaster - QTR-6TT - Orville Rick Wright - Texas Tea - knife
Intended use: Tactical
Type of production: Industrial
Production Lama: 100% USA
Blade: stainless steel sintered CTS-BD4P
Treatment Lama: Texas Tea
Handle: G-10
Blade length: 76mm.
Blade thickness: 5mm.
Total Length: 19.6mm.
Thick when closed: 13mm.
Balancing: -
Weight: 181g.
Closure: Frame Lock
Clip: Removable and reversible, stainless steel
Sheath: -
Packaging: Cardboard box with logos Quartermaster
Note: Opening system on ball bearings ORB Pivot System - Exemplary liminata edition individually numbered on the blade and box12046€229.51Out of stock -
Quartermaster - ALF-1 - Titanium Neck Knife
Intended use: Tactical / Neck
Type of production: Industrial
Production Blade: 100% USA
Blade: Titanium Beta
Treatment Blade: -
Handle: -
Blade length: 50mm.
Blade thickness: 4mm.
Total length: 76mm.
Thick when closed: -
Balancing: -
Weight: 18g.
Closure: -
Clip: -
Sheath: Kydex, thermoformed vacuum neck
Packaging: Cardboard box with logos Quartermaster
Notes: -10958€81.97Out of stock -
Quartermaster - QTR-8TT - John Quayle Higgins III - Texas Tea - knife
Intended use: Tactical
Type of production: Industrial
Production Blade: 100% USA
Blade: Stainless Steel sintered CTS-BD4P
Treatment Blade: Texas Tea
Handle: G-10
Blade length: 89mm.
Blade thickness: 5mm.
Overall length: 241mm.
Thick when closed: 13mm.
Balancing: -
Weight: 213g.
Lock: Frame Lock
Clip: Removable and reversible, stainless steel
Sheath: -
Packaging: Cardboard box with logos Quartermaster
Notes: Opening system on ball bearings ORB Pivot System - Exemplary liminata edition individually numbered on the blade and box10957€245.90Out of stock -
Quartermaster - QTR-4TT - John Hannibal Smith - Texas Tea - knife
Intended use: Tactical
Type of production: Industrial
Production Blade: 100% USA
Blade: Stainless Steel sintered CPM-154CM
Treatment Blade: Texas Tea
Handle: G-10
Blade length: 127mm.
Blade thickness: 5mm.
Overall length: 279mm.
Thick when closed: 19mm.
Balancing: -
Weight: 329g.
Closure: Subliminal Frame Lock
Clip: Removable and reversible, stainless steel
Sheath: -
Packaging: Cardboard box with logos Quartermaster
Notes: Opening system on ball bearings ORB Pivot System - Exemplary liminata edition individually numbered on the blade and box10956€221.31Out of stock -
Quartermaster - QTR-4 - John Hannibal Smith - knife
Intended use: Tactical
Type of production: Industrial
Production Blade: 100% USA
Blade: Stainless Steel sintered CPM-154CM
Treatment Blade: Stone Washed
Handle: G-10
Blade length: 127mm.
Blade thickness: 5mm.
Overall length: 279mm.
Thick when closed: 19mm.
Balancing: -
Weight: 329g.
Closure: Subliminal Frame Lock
Clip: Removable and reversible, stainless steel
Sheath: -
Packaging: Cardboard box with logos Quartermaster
Notes: Opening system on ball bearings ORB Pivot System - Exemplary liminata edition individually numbered on the blade and box10955€200.82Out of stock -
Kanekoma - Sadakoma Higo traditional Japanese knife - brown leather 018 209 - knife
Kanekoma - Sadakoma Higo traditional Japanese knife - brown leather 018 209 - knife
Charming knife used by the Japanese farmer " Higonokami kanekoma ."
As is typical for many agricultural tools , this Japanese knife is extremely simple but the result of a secular improvement that has found it difficult balance between form and function, and between cost and benefit.
The main feature is definitely the quality of the blade, in fact, uses a steel San Mai to three layers of which the one at the center rough .
It has a razor wire , as is appropriate for a tool to cut and not just born to be displayed in glass cases .
production: Japanese crafts
Blade : carbon steel, San Mai
Handle: black brass plate with elegant brown leather cover
Closure: Without lock blade
Closed Length : 120mm .
Blade length : 90mm .
Blade thickness : 3mm
Length open : 210mm
Weight: 72g .
Notes: lubricate the blade otherwise easily subject to oxidation .
Packing: elegant and fine wooden box with Japanese characters018209€0.00Only -20 leftOut of stock -
Quartermaster - QTR-7 - Thomas Magnum - knife
Intended use: Tactical
Type of production: Industrial
Production Blade: 100% USA
Blade: Stainless steel sintered Carpenter CTS BD-4P Alloy
Treatment Blade: Stone Washed
Handle: G-10
Blade length: 127mm.
Blade thickness: 5mm.
Overall length: 267mm.
Thick when closed: -
Balancing: -
Weight: 275g.
Closure: -
Clip: -
Sheath: Kydex Ghost transparent, thermoformed vacuum, fixed with Malice Clips, MOLLE compatible
Packaging: Cardboard box with logos Quartermaster
Note: Specimen liminata edition individually numbered on the blade and box10881€262.30Out of stock -
Quartermaster - QTR-5 - Karambit Theodore T.C. Calvin - knife
Intended use: Tactical / EDC
Type of production: Industrial
Production Blade: 100% USA
Blade: Stainless steel sintered CPM-154CM
Treatment Blade: Stone Washed
Handle: G-10 and Stainless Steel
Blade length: 50mm.
Blade thickness: 5mm.
Overall length: 152mm.
Thick when closed: 13mm.
Balancing: -
Weight: 148g.
Lock: Frame Lock
Clip: Removable and reversible stainless steel
Sheath: -
Packaging: Cardboard box with logos Quartermaster
Notes: Opening system on ball bearings ORB Pivot System - Exemplary liminata edition individually numbered on the blade and box10879€155.74Out of stock -
Quartermaster - QTR-3 - Templeton Face Peck - knife
Intended use: Tactical / EDC
Type of production: Industrial
Production Blade: 100% USA
Blade: Stainless steel sintered CPM-154CM
Treatment Blade: Stone Washed
Handle: G-10
Blade length: 70mm.
Blade thickness: 5mm.
Overall length: 178mm.
Thick when closed: 17mm.
Balancing: -
Weight: 190g.
Closure: Subliminal Frame Lock
Clip: Removable and reversible stainless steel
Sheath: -
Packaging: Cardboard box with logos Quartermaster
Notes: Opening system on ball bearings ORB Pivot System - Exemplary liminata edition individually numbered on the blade and box10878€172.13Out of stock -
Quartermaster - QTR-3 - Templeton Face Peck - knife
Intended use: Tactical / EDC
Type of production: Industrial
Production Blade: 100% USA
Blade: Stainless steel sintered CPM-154CM
Treatment Blade: Stone Washed
Handle: G-10
Blade length: 70mm.
Blade thickness: 5mm.
Overall length: 178mm.
Thick when closed: 17mm.
Balancing: -
Weight: 190g.
Closure: Subliminal Frame Lock
Clip: Removable and reversible stainless steel
Sheath: -
Packaging: Cardboard box with logos Quartermaster
Notes: Opening system on ball bearings ORB Pivot System - Exemplary liminata edition individually numbered on the blade and box10877€0.00Only -99 leftOut of stock -
Kershaw - Boa Speed Safe - 1580 - coltello
Destinazione d'uso: Tattico/Militare
Tipo di produzione: industriale
Lama: in acciaio inox CPM440V
Trattamento Lama: nitruro di titanio
Produzione Lama: USA
Manicatura: Alluminio
Lunghezza lama: 90mm.
Spessore della lama: 3mm.
Lunghezza chiuso: 118mm.
Lunghezza totale: 200mm.
Bilanciatura: -
Peso: 142g.
Chiusura: Liner Lock
Clip: amovibile in acciaio inox
Fodero: -
Note: Design by Ken Onion - Apertura Servoassistita - Fermo di sicurezza a coltello chiuso4234