Knives, collection knife, tactical knives, outdoor knives, pocket knives and tools

Use: Light Utility / All Round

Type of production: Handcrafted
Country of Production: Italy
Blade: integral, D2 steel at 59/61HRC
Blade treatment: Black Raw
Handle: Micarta
Blade Length: 90mm.
Blade thickness: 5mm.
Total length: 204mm.
Balance: backward
Weight: 200g.
Sheath: made of Kydex, thermoformed
Packaging: accompanied by certificate of guarantee and authenticity
Notes: handcrafted knife

Use: Light Utility / All Round

Type of production: Handcrafted
Country of Production: Italy
Blade: integral, D2 steel at 59/61HRC
Blade treatment: Black Raw
Handle: Micarta
Blade Length: 90mm.
Blade thickness: 5mm.
Total length: 204mm.
Balance: backward
Weight: 200g.
Sheath: made of Kydex, thermoformed
Packaging: accompanied by certificate of guarantee and authenticity
Notes: handcrafted knife

Intended Use: EDC/Gentleman

Production type: Industrial
Country of manufacture: Germany - Solingen
Blade: Carbon steel O1
Blade treatment: Meteoric Black Stonewashed
Handle: Stained maple burl
Blade length: 80mm.
Blade thickness: 2.1mm.
Total length: 190mm.
Weight: 69g.
Closure: SlipJoint (without blade lock)
Clip: -
Sheath: -
Packaging: Cardboard box with Boker logos, zippered knife case
Notes: -

Use: EDC / Light Utility / All Round

Type of production: Artisan
Country of production: Italy
Blade: integral, in D2 steel at 59 / 61HRC
Blade treatment: Raw Finish
Handle: Micarta
Blade length: 90mm.
Blade thickness: 5mm.
Total length: 204mm.
Balancing: backward
Weight: 201g.
Sheath: in Kydex, thermoformed, compatible with tek-lok bindings or usable as a neck knife
Packaging: -
Notes: unique knife with Clip point tip, handcrafted

Knife withdrawn from a private collection - Limited edition production in Japanese CoS steel in SanMai dating back to 2018 and no longer available - In like new condition, no marks on the blade (never cut, never resharpened) or on the handle. Supplied with handmade Kydex sheath and Wander Tactical certificate - Checked and certified by our in-house Coltelleria Collini laboratory.

In collaboration with Wander Tactical we have decided to propose their new neck knife, the Raptor model, in an exclusive version with a satin blade that uses the famous Japanese San Mai steel produced by Takefu Steel. Specifically we used, for the central plate, the CoS at 61.5HRC (Cobalt Special, mechanically considered 25% higher than the already highly appreciated VG10) and the 420J2 (at 56 HRC) for the two side plates in order to guarantee a very high cutting capacity, but at the same time a remarkable resistance to abrasion, resilience and resistance to oxidation.

Use: Neck Knife / Collection

Type of production: Artisan
Production Lama: Italy
Blade: integral, in Japanese laminated stainless steel (San Mai) with cutting edge in CoS at 61.5HRC with cryogenic hardening
Blade treatment: Satin
Handle: Paracord
Blade length: 80mm.
Blade thickness: 6.5mm.
Total length: 175mm.
Balancing: backward
Weight: 156g.
Sheath: in Kydex, thermoformed, with lanyard for Neck Knife use
Packaging: -
Notes: Each knife is unique and handcrafted

As in the ancient Japanese Samurai swords.

The rolled steel - imported into Italy by Collini Steel directly from the Japanese Takefu Steel - is based on the ancient Japanese tradition in the creation of the famous Samurai swords. In fact, as early as 1100 the expert Japanese blacksmiths combined different materials together to give the Katana swords incredible cutting capabilities combined with a resistance and flexibility previously unknown. It is thanks to this revolutionary construction technique that Samurai swords have been preserved to this day, becoming one of the most fascinating objects made by man. Following this tradition applied to modern metallurgy, today we are able to have technologically advanced steels already tested and used in cutlery also by famous brands such as Fallkniven, Cold Steel, Mcusta, Kai, Sog, Zwilling, Rockstead, etc.

Characteristics of San Mai steel: These are different types of metals bonded together to create a composite that encloses and intensifies the strengths of the metals individually taken:

- Longer life of the cutting edge
thanks to the use of very high quality steels with high carbon content (VG10, CoS, Shiro) or sintered (SPG2), in the heart of the sheet (Core Steel), the blade, once hardened, achieves decidedly hardness and cutting performance higher than those achieved with the use of traditional steels.

- Greater resilience
built with the principle of Japanese swords, multilayer steel is difficult to break thanks to the toughness of the central steel (Core Steel) and the elasticity of the steel used for the side coating (Stainless Steel).

- Better corrosion resistance
the steel used for the external layers (Stainless Steel) guarantees the blade a high resistance to corrosion. The combination of the two or more materials used by Takefu Steel generates, at the galvanic level, a structure that improves the corrosion resistance even on the wire.

- Easy processing even after heat treatment
although steel normally becomes harder after hardening, the lateral steel used in multilayer processing does not lose its softness and allows easy processing, drilling or welding even after heat treatment. For an optimal performance of the blade, cryogenic treatment is recommended.

- Improvement of the aesthetic result
The knives made with multi-state steel or with a damascus pattern at the end of the processing are aesthetically elegant, refined and highly appreciated by collectors all over the world.

For more information: collinisteel

Use: EDC / Light Utility / All Round

Type of production: Artisan
Country of production: Italy
Blade: integral, in D2 steel at 59 / 61HRC
Blade treatment: Raw Finish
Handle: Micarta
Blade length: 90mm.
Blade thickness: 5mm.
Total length: 204mm.
Balancing: set back
Weight: 217g.
Sheath: in Kydex, thermoformed, compatible with tek-lok bindings or usable as a neck knife
Packaging: -
Notes: Each knife is unique and handcrafted; there may be slight differences in finishes, colors and materials compared to the photographed product

Use: Neck Knife / Collection

Type of production: handmade
Country of production: Italy
Blade: full tang, D2 steel
Blade Finish: Raw
Handle: Paracord
Blade length: 80mm.
Blade thickness: 5.5mm.
Total length: 180mm.
Weight: 130g.
Sheath: Thermoformed Kydex
Packaging: -
Notes: -

Use: Neck Knife / Collection

Type of production: Artisan
Production Lama: Italy
Blade: integral, D2 steel
Blade treatment: Raw Finish
Handle: Paracord
Blade length: 80mm.
Blade thickness: 6.5mm.
Total length: 180mm.
Balancing: set back
Weight: 130g.
Sheath: in Kydex, thermoformed
Packaging: -
Notes: Each knife is unique and handcrafted; there may be slight differences in finishes compared to the product photographed

Use: EDC / Light Utility / All Round

Type of production: Artisan
Country of production: Italy
Blade: integral, in D2 steel at 59 / 61HRC
Blade treatment: Raw Finish
Handle: Micarta
Blade length: 90mm.
Blade thickness: 5mm.
Total length: 204mm.
Balancing: set back
Weight: 215g.
Sheath: in Kydex, thermoformed, compatible with tek-lok bindings or usable as a neck knife
Packaging: -
Notes: Each knife is unique and handcrafted; there may be slight differences in finishes, colors and materials compared to the photographed product

Intended Use: Sporting/Collection

Production type: Industrial
Country of Production: Italy
Blade: stainless steel M390 61HRC
Blade treatment: satin finish
Handle: titanium and carbon fiber with copper inserts
Blade length: 88mm.
Blade thickness: 4mm.
Total length: 212mm.
Weight: 142g.
Clip: titanium, machined from billet
Closure: frame lock
Packaging: cardboard box with Boker Plus logos, zippered pouch, warranty certificate
Notes: Design by Jens Anso - Limited edition of only 500 pieces numbered on blade, box and certificate

Absolutely like new - Comes from a private collection - Unique item made in 2020, prototype, does not correspond to any standard model of Wander Tactical production - Made entirely by hand.

Use: Collection / Utility / Hunting

Production type: Handcrafted
Country of Production: Italy
Blade: integral, japanese rolled steel (San Mai) with V-Toku2 (carbonaceous) cutting edge at 62/63HRC and SUS410 (stainless steel) outer cheeks
Blade finish: satin finish 
Handle: Paracord
Blade length: 90mm.
Blade thickness: 6.65mm.
Total length: 200mm.
Balance: backward
Weight: 180g.
Sheath: in kydex
Package: Certificate of authenticity
Notes: Unique piece of 2020 - Prototype: it doesn't correspond to any standard model of Wander Tactical production - Entirely hand made - Absolutely like new, coming from a private collection,

Japanese steel merges with Italian excellence

For this 2019/2020 collaboration, exclusive to Coltelleria Collini, we decided to propose a series of best sellers produced by Wander Tactical. Knives made with the famous San Mai steel produced by the Japanese Takefu Steel. Specifically we have used the carbonaceous V-Toku2 at 62/63HRC for the central plate and the stainless SUS410 for the two external plates, in order to guarantee a very high cutting capacity, penetration and edge holding together with an easy resharpening and maintenance. At the same time the blade has a remarkable resistance to corrosion and an important increase of resilience given by the type of extreme steel and the laminated structure.

As in the ancient swords of the Japanese Samurai.

The rolled steel - imported in Italy by Collini Steel directly from the Japanese Takefu Steel - is based on the ancient Japanese tradition in the creation of the famous Samurai swords. As early as 1100, expert Japanese blacksmiths combined different materials to give Katana swords incredible cutting capabilities combined with previously unknown strength and flexibility. It is thanks to this revolutionary construction technique that the Samurai swords have been preserved until our days becoming one of the most fascinating objects made by man. Following this tradition applied to modern metallurgy, we are now able to have technologically advanced steels already tested and used in cutlery by famous brands such as Fallkniven, Cold Steel, Mcusta, Kai, Sog, Zwilling, Rockstead, etc.

Characteristics of San Mai steel: It is made of different types of metals alloyed together to create a composite that contains and intensifies the strengths of the metals taken individually:

- Longer cutting edge life
thanks to the use of high quality steels with a high carbon content (VG10, CoS, Shiro) or sintered (SPG2), in the core steel, the blade, once hardened, reaches hardness and cutting performance decidedly superior to those achieved with the use of traditional steels.

- Greater resilience
Built on the principle of Japanese swords, the multilayer steel is difficult to break thanks to the toughness of the central steel (Core Steel) and the elasticity of the steel used for the lateral coating (Stainless Steel).

- Improved corrosion resistance
The steel used for the outer layers (Stainless Steel) gives the blade a high resistance to corrosion. The combination of the two or more materials used by Takefu Steel generates, at a galvanic level, a structure that improves corrosion resistance even on the edge.

- Easy machining even after heat treatment
Although steel normally becomes harder after hardening, the lateral steel used in multilayer machining does not lose its softness and allows easy machining, drilling or welding even after heat treatment. For optimum blade performance, cryogenic treatment is recommended.

- Improved aesthetic performance
Knives made of multi-state steel or damascus pattern at the end of the processing are aesthetically elegant, refined and highly appreciated by collectors all over the world.

For further information: collinisteel

Use: EDC / Light Utility / All Round

Type of production: Artisan
Country of production: Italy
Blade: integral, in D2 steel at 59 / 61HRC
Blade treatment: Raw Finish
Handle: Micarta
Blade length: 90mm.
Blade thickness: 6mm.
Total length: 200mm.
Balancing: set back
Weight: 223g.
Sheath: in Kydex, thermoformed, compatible with tek-lok bindings (not supplied) or usable as a neck knife
Packaging: -
Notes: Each knife is unique and handcrafted; there may be slight differences in finishes, colors and materials compared to the photographed product

Use: EDC / Light Utility / All Round

Type of production: Artisan
Country of production: Italy
Blade: integral, in D2 steel at 59 / 61HRC
Blade treatment: Raw Finish
Handle: Micarta
Blade length: 82mm.
Blade thickness: 5mm.
Total length: 200mm.
Balancing: set back
Weight: 205g.
Sheath: in Kydex, thermoformed, compatible with tek-lok bindings (not supplied) or usable as a neck knife
Packaging: -
Notes: Each knife is unique and handcrafted; there may be slight differences in finishes, colors and materials compared to the photographed product

Intended Use: Sporting/Collection

Production type: Industrial
Country of Production: Italy
Blade: Stainless steel M390 61HRC
Blade treatment: satin finish
Sleeve: Titanium and carbon fiber
Blade length: 88mm.
Blade thickness: 3.7mm.
Total length: 208mm.
Weight: 133g.
Clip: titanium, billet machined
Locking system: frame lock
Package: Cardboard box with Boker Plus logos, nylon pouch with zipper.
Notes: Design by Todd Rexford - Limited and numbered edition on box and blade.

Intended Use: EDC / Sporting

Production Type: Industrial
Country of Production: Taiwan
Blade: D2 steel
Blade treatment: black coating
Handle: micarta
Blade length: 76mm.
Blade thickness: 1.9mm.
Total lenght: 180mm.
Weight: 44g.
Clip: stainless steel, removable
Closure: liner lock
Package: cardboard box with Boker Plus logos, nylon pouch with zipper
Notes: opening through "Minimalist Flipper" system on ball bearings.

Intended use: Gentleman / Sportsman

Type of production: Industrial
Country of production: Taiwan
Blade: VG-10 stainless steel
Blade treatment: satin finish
Handle: titanium frame with cocobolo grips
Blade length: 80mm.
Blade thickness: 2.5mm.
Total length: 185mm.
Weight: 51g.
Clip: titanium
Closure: Liner lock
Packaging: cardboard box with Boker Plus logos
Notes: Design by Brad Zinker

Intended Use: EDC / Sporting

Production type: Industrial
Country of Production: Taiwan
Blade: D2 steel
Blade treatment: satin finish
Handle: G10
Blade length: 76mm.
Blade thickness: 1.9mm.
Total length: 180mm.
Weight: 46g.
Clip: stainless steel, removable
Closure: liner lock
Packaging: cardboard box with Boker Plus logos
Notes: opening through "Minimalist Flipper" system.

Vintage knife produced in the 90s. Excellent for quality level and for materials used, suitable for hunting and collection use

Intended use: hunting / collection

Type of production: industrial
Country of production: Germany
Blade: 440C stainless steel
Blade treatment: -
Handle: nickel silver and deer
Blade length: 75mm.
Blade thickness: 2.5mm.
Closed length: 110m.
Total length: 190mm.
Weight: 162g.
Closing: -
Clip: -
Note: -

Vintage knife produced in the 90s. Excellent in terms of quality and materials used, suitable for sports use and collection

Intended use: hunting / collection

Type of production: industrial
Country of production: Germany
Blade: 440C stainless steel
Blade treatment: -
Handle: nickel silver and deer
Blade length: 80mm.
Blade thickness: 2.5mm.
Closed length: 108m.
Total length: 185mm.
Weight: 52g.
Closing: -
Clip: -
Note: -

Vintage knife produced in the 90s. Excellent for quality level and for materials used, suitable for hunting and outdoor use and collection

Intended use: hunting / collection

Type of production: industrial
Country of production: Germany
Blade: 440C stainless steel
Blade treatment: -
Handle: brass and deer
Blade length: 80mm.
Blade thickness: 3mm.
Closed length: 118m.
Total length: 200mm.
Weight: 189g.
Closure: back lock
Clip: -
Note: -

In collaboration with Wander Tactical we have decided to propose the Scrambler model, in an exclusive satin-blade version that uses the famous Japanese San Mai steel produced by Takefu Steel.
This time, in the rich catalog of products they offer, we have chosen a particular steel with a carbonaceous edge, but with external stainless steel cheeks. Specifically we used, for the central plate, the carbonaceous V-Toku2 at 62 / 63HRC and the SUS410 for the external lamination in order to guarantee a very high cutting capacity, penetration and sealing of the wire together with an ease of re-sharpening and maintenance; at the same time the blade has a remarkable resistance to corrosion and an important increase in resilience given by the laminated structure.
Use: EDC / Light Utility / All Round

Type of production: Artisan
Production Lama: Italy
Blade: integral, laminated Japanese steel (San Mai) with V-Toku2 (carbonaceous) cutting edge at 62 / 63HRC and SUS410 (stainless steel) external scales
Blade treatment: Satin
Handle: Micarta
Blade length: 82mm.
Blade thickness: 6.8mm.
Total length: 200mm.
Balancing: set back
Weight: 229g.
Sheath: in Kydex, thermoformed, with belt loop
Packaging: certificate of authenticity
Notes: unique and exclusive piece

As in the ancient Japanese Samurai swords.

The rolled steel - imported into Italy by Collini Steel directly from the Japanese Takefu Steel - is based on the ancient Japanese tradition in the creation of the famous Samurai swords. In fact, as early as 1100 the expert Japanese blacksmiths combined different materials together to give the Katana swords incredible cutting abilities combined with a resistance and flexibility previously unknown. It is thanks to this revolutionary construction technique that Samurai swords have been preserved to this day, becoming one of the most fascinating objects made by man. Following this tradition applied to modern metallurgy, today we are able to have technologically advanced steels already tested and used in cutlery also by famous brands such as Fallkniven, Cold Steel, Mcusta, Kai, Sog, Zwilling, Rockstead, etc.

Characteristics of San Mai steel: These are different types of metals bonded together to create a composite that encloses and intensifies the strengths of the metals individually taken:

- Longer tool life

thanks to the use of very high quality steels with high carbon content (VG10, CoS, Shiro) or sintered (SPG2), in the heart of the sheet (Core Steel), the blade, once hardened, achieves decidedly hardness and cutting performance higher than those achieved with the use of traditional steels.

- Greater resilience
built on the principle of Japanese swords, multilayer steel is difficult to break thanks to the toughness of the central steel (Core Steel) and the elasticity of the steel used for the side facing (Stainless Steel).

- Better corrosion resistance
the steel used for the external layers (Stainless Steel) guarantees the blade a high resistance to corrosion. The combination of the two or more materials used by Takefu Steel generates, on a galvanic level, a structure that improves corrosion resistance even on the wire.

- Easy processing even after heat treatment
although the steel normally becomes harder after hardening, the side steel used in multilayer processing does not lose its softness and allows easy processing, drilling or welding even after heat treatment. For an optimal performance of the blade, cryogenic treatment is recommended.

- Improvement of the aesthetic result
The knives made with multi-state steel or with a damask pattern at the end of the processing are aesthetically elegant, refined and highly appreciated by collectors all over the world.

For more information: collinisteel

In collaboration with Wander Tactical we have decided to offer their heavy duty, the Smilodon model, in an exclusive satin blade version that uses the famous Japanese San Mai steel produced by Takefu Steel.

This time, in the rich catalog of products offered by them, we chose a particular steel with a carbon cutting edge, but with external stainless steel cheeks. Specifically, for the central sheet we used the carbonaceous V-Toku2 at 62 / 63HRC and the SUS410 for external lamination in order to guarantee a very high cutting, penetration and sealing capacity of the wire together with an ease of regrinding and maintenance; at the same time the blade has a remarkable corrosion resistance and an important increase in resilience given by the laminated structure.

Use: EDC / Light Utility / All Round

Type of production: Artisan
Lama production: Italy
Blade: integral, in Japanese laminated steel (San Mai) with cutting edge in V-Toku2 (carbon) at 62 / 63HRC and external cheeks in SUS410 (stainless steel)
Blade treatment: Satin
Handle: Micarta
Blade length: 82mm.
Blade thickness: 6.8mm.
Total length: 200mm.
Balancing: backward
Weight: 215g.
Sheath: Kydex, thermoformed, with belt loop
Packaging: certificate of authenticity
Notes: unique and exclusive piece

In collaboration with "Wander Tactical" We decided to bring their EDC, the Scrambler model, in an exclusive satin-blade version that uses the famous Japanese Steel San Mai produced by Takefu Steel. Specifically, we used, for the central plate, the CoS to 61,5HRC (Cobalt Special, considered mechanically superior by 25% compared to the already much appreciated VG10) and 420J2 (56 HRC) for the two side plates in order to ensure high cutting capacity, but at the same time a remarkable resistance to abrasion, resilience and resistance to oxidation.

Occupation: EDC / Light Utility / All Round

Type of production: Custom
Country of production: Italy
Blade: Full, Japanese-rolled stainless steel (San Mai) with sharp CoS to 61,5HRC in cryogenic tempering
Blade treatment: Satin Raw
Handle: Micarta
Blade length: 82mm.
Blade thickness: 6.8mm.
Overall length: 200mm.
Balancing: backward
Weight: 215g.
Sheath: Kydex, compatible with tek-lok attacks (not supplied) or used as a neck knife
Packaging: -
Notes: Each knife is unique and handmade; may be slight of finishes, colors and material differences with respect to the photographed product.

Use: Neck Knife / Collection

Type of production: Artisan
Lama production: Italy
Blade: integral, in D2 steel
Blade treatment: Raw Finish
Handle: Paracord
Blade length: 80mm.
Blade thickness: 6.5mm.
Total length: 180mm.
Balancing: set back
Weight: 130g.
Sheath: in Kydex, thermoformed, with cord for use with Neck Knife
Packaging: -
Notes: Each knife is unique and handcrafted; there may be slight differences in finishes, colors and materials compared to the photographed product

Use: Neck Knife / Collection

Type of production: Artisan
Lama production: Italy
Blade: integral, in D2 steel
Blade treatment: Raw Finish
Handle: Paracord
Blade length: 80mm.
Blade thickness: 6.5mm.
Total length: 180mm.
Balancing: set back
Weight: 130g.
Sheath: in Kydex, thermoformed, with cord for use with Neck Knife
Packaging: -
Notes: Each knife is unique and handcrafted; there may be slight differences in finishes, colors and materials compared to the photographed product

Intended use: Tactical / Sports

Type of production: Industrial
Country of production: Taiwan
Blade: in D2 steel
Blade treatment: stonewashed
Handle: stainless steel stonewashes
Blade length: 80mm.
Blade thickness: 3mm.
Total length: 185mm.
Weight: 147g.
Clip: stainless steel, machined from solid, removable
Closure: Frame Lock
Packaging: cardboard box with Boker Plus logos
Notes: Design by Jason B. Stout - Carson Flipper opening system with movement on ball bearings

Type of production: handmade

Country of production: Italy
Blade: in steel D2 at 59 / 60HRC
Blade treatment: Black Blood
Handle: Micarta
Blade length: 82mm.
Blade thickness: 6.5mm.
Total length: 200mm.
Balancing: set back
Weight: 220g.
Sheath: Kydex, thermoformed, with Tek-Lok type connection
Package: -
Notes: Each knife is unique and handcrafted; there may be slight differences in finishes, colors and materials compared to the photographed product.

Intended use: Tactical / Sports

Type of production: Industrial
Country of production: Taiwan
Blade: in D2 steel
Blade treatment: stonewashed
Handle: steel liners and G10 grips
Blade length: 79mm.
Blade thickness: 3.5mm.
Total length: 200mm.
Weight: 156g.
Clip: stainless steel, removable and reversible
Closure: liner lock
Packaging: cardboard box with Boker Plus logos
Notes: Design by Boris Manasherov - opening system through Carson Flipper system on ball bearings - opening system similar to Emerson Wave

In collaboration with Wander Tactical we decided to propose their new neck knife, the Raptor, in an exclusive satin-blade version that uses the famous SanMai japanese steel produced by Takefu Steel. For the central plate we have chose the CoS with 61,5HRC (Cobalt Special, considered mechanically superior by 25% compared to the already much appreciated VG10) and 420J2 with 56 HRC for the two side plates in order to ensure high cutting capacity but at the same time a remarkable resistance to abrasion, resilience and resistance to oxidation.

Use: Neck Knife / Collection

Type of production: handmade
Production Country: Italy
Blade: Full tang with japanese laminated (SanMai) 61.5HRC CoS stainless steel with cryogenic temper
Blade treatment: Satin
Handle: Paracord
Blade length: 80mm.
Blade thickness: 6.5mm.
Overall length: 175mm.
Balancing: backward
Weight: 156g.
Sheath: Kydex, thermoformed, for use with lanyard Neck Knife
Packaging: -
Notes: Each knife is unique and handmade; may be slight of finishes, colors and material differences with respect to the photographed product.

Use: EDC / Light Utility / All Round

Type of production: Artisan
Country of production: Italy
Blade: integral, in steel D2 at 59 / 61HRC
Blade treatment: Raw Finish and satin
Handle: Micarta
Blade length: 90mm.
Blade thickness: 6.5mm.
Total length: 203mm.
Balancing: set back
Weight: 230g.
Sheath: Kydex, thermoformed, compatible with tek-lok attachments (not supplied) or usable as neck knife
Package: -
Notes: This model is unique and handcrafted

Use: Neck Knife / Collection

Type of production: handmade
Production Country: Italy
Blade: Full tang, D2 Steel
Blade treatment: Raw Finish
Handle: Paracord
Blade length: 80mm.
Blade thickness: 6.5mm.
Overall length: 175mm.
Balancing: backward
Weight: 156g.
Sheath: Kydex, thermoformed, for use with lanyard Neck Knife
Packaging: -
Notes: Each knife is unique and handmade; may be slight of finishes, colors and material differences with respect to the photographed product.

In collaboration with Wander Tactical we decided to propose their new neck knife, the Raptor, in an exclusive satin-blade version that uses the famous SanMai japanese steel produced by Takefu Steel. For the central plate we have chose the CoS with 61,5HRC (Cobalt Special, considered mechanically superior by 25% compared to the already much appreciated VG10) and 420J2 with 56 HRC for the two side plates in order to ensure high cutting capacity but at the same time a remarkable resistance to abrasion, resilience and resistance to oxidation.

Use: Neck Knife / Collection

Type of production: handmade
Production Country: Italy
Blade: Full tang with japanese laminated (SanMai) 61.5HRC CoS stainless steel with cryogenic temper
Blade treatment: Satin
Handle: Paracord
Blade length: 80mm.
Blade thickness: 6.5mm.
Overall length: 175mm.
Balancing: backward
Weight: 156g.
Sheath: Kydex, thermoformed, for use with lanyard Neck Knife
Packaging: -
Notes: Each knife is unique and handmade; may be slight of finishes, colors and material differences with respect to the photographed product.

In collaboration with "Wander Tactical" We decided to bring their EDC, the Scrambler model, in an exclusive satin-blade version that uses the famous Japanese Steel San Mai produced by Takefu Steel. Specifically, we used, for the central plate, the CoS to 61,5HRC (Cobalt Special, considered mechanically superior by 25% compared to the already much appreciated VG10) and 420J2 (56 HRC) for the two side plates in order to ensure high cutting capacity, but at the same time a remarkable resistance to abrasion, resilience and resistance to oxidation.

Occupation: EDC / Light Utility / All Round

Type of production: Custom
Country of production: Italy
Blade: Full, Japanese-rolled stainless steel (San Mai) with sharp CoS to 61,5HRC in cryogenic tempering
Blade treatment: Satin Raw
Handle: Paracord
Blade length: 82mm.
Blade thickness: 6.8mm.
Overall length: 200mm.
Balancing: backward
Weight: 215g.
Sheath: Kydex, compatible with tek-lok attacks (not supplied) or used as a neck knife
Packaging: -
Notes: Each knife is unique and handmade; may be slight of finishes, colors and material differences with respect to the photographed product.

In collaboration with "Wander Tactical" We decided to bring their EDC, the Scrambler model, in an exclusive satin-blade version that uses the famous Japanese Steel San Mai produced by Takefu Steel. Specifically, we used, for the central plate, the CoS to 61,5HRC (Cobalt Special, considered mechanically superior by 25% compared to the already much appreciated VG10) and 420J2 (56 HRC) for the two side plates in order to ensure high cutting capacity, but at the same time a remarkable resistance to abrasion, resilience and resistance to oxidation.

Use: EDC / Light Utility / All Round

Type of production: Artisan
Lama production: Italy
Blade: integral, Japanese rolled stainless steel (San Mai) with 61.5HRC Crystalline-hardened CoS cutting edge
Lama treatment: Raw Satin
Handle: Paracord
Lam length: 90mm.
Blade thickness: 6.8mm.
Total length: 203mm.
Balancing: set back
Weight: 240g.
Sheath: Kydex, thermoformed, compatible with tek-lok attachments (not supplied) or usable as neck knife
Package: -
Notes: Each knife is unique and handcrafted; there may be slight differences in finishes, colors and materials compared to the photographed product.

Use: Neck Knife / Collection

Type of production: handmade
Production Country: Italy
Blade: Full tang, D2 Steel
Blade treatment: Black GunKote
Handle: Paracord
Blade length: 80mm.
Blade thickness: 6.5mm.
Overall length: 175mm.
Balancing: backward
Weight: 156g.
Sheath: Kydex, thermoformed, for use with lanyard Neck Knife
Packaging: -
Notes: Each knife is unique and handmade; may be slight of finishes, colors and material differences with respect to the photographed product.

Occupation: Neck Knife / Collection

Type of production: Artisan
Lama production: Italy
Blade: integral, in D2 steel
Lama treatment: Black Blood
Handle: Paracord
Blade length: 80mm.
Blade thickness: 6.5mm.
Total length: 175mm.
Balancing: set back
Weight: 156g.
Sheath: Kydex, thermoformed, with cord for Neck Knife use
Package: -
Notes: Each knife is unique and handcrafted; there may be slight differences in finishes, colors and materials compared to the photographed product

Use: Neck Knife / Collection

Type of production: Artisan
Blade production: Italy
Blade: integral, D2 steel
Blade Treatment: Bronze GunKote
Manicure: Paracord
Blade Length: 80mm.
Blade thickness: 6.5mm.
Total Length: 175mm.
Balancing: backward
Weight: 156g.
Sheath: Kydex, thermoformed, with cord for use with Neck Knife
Packing: -
Notes: Each knife is unique and handcrafted; There may be differences in finishes, colors and materials compared to the photographed product

Use: EDC / Light Utility / All Round

Type of production: Artisan
Country of production: Italy
Blade: integral, D2 steel to 59 / 61HRC
Blade Treatment: Raw Finish
Manicure: Micarta
Blade Length: 82mm.
Blade thickness: 5mm.
Total length: 200mm.
Balance: backward
Weight: 205g.
Sheath: in Kydex, thermoformed, compatible with tek-lok attachments (not supplied) or usable as neck knife
Packing: -
Notes: Each knife is unique and handcrafted; There may be differences in finishes, colors and materials compared to the photographed product

Occupation: EDC / Light Utility / All Round

Type of production: Handcrafted
Production Country: Italy
Blade: integral, steel D2 59 / 61HRC
Blade treatment: Black Blood
Handle: Micarta
Blade length: 82mm.
Blade thickness: 5mm.
Overall length: 200mm.
Balancing: backward
Weight: 175g.
Sheath: Kydex, thermally compatible with tek-lok attacks (not supplied) or used as a neck knife
Packaging: -
Notes: Each knife is unique and handmade; may be slight differences of finishes, colors and materials from product photographed