Knives, collection knife, tactical knives, outdoor knives, pocket knives and tools

KNIFE WITHDRAWN FROM PRIVATE COLLECTION

Type: Previously Purchased
Condition: in good condition
Available in stores: NO
Sharpening: Resharpened by our internal laboratory
Marks on blade: NO
Marks on handle: YES, small scratches
Packaging: YES
Checked and Certified by our internal laboratory
A pollywog represents metamorphosis in the animal kingdom, adapting and changing its form to survive in its environment. The same principle applies here. The Spyderco Poliwog CLIPIT® thrives in a small-knife-friendly environment while keeping the features necessary to excel in a harsh, heavy cutting and performance setting. Its distinctive opened-ended Ball Bearing Lock™ exposes the knife's inner workings for easy cleaning and rates as one of Spyderco's highest strength locking mechanisms. Pulling back on the ball unlocks the blade ambidextrously from either side of the knife.

The hand settles on the curved handle positioning the index finger into a choil that optimizes control and generates less fatigue and pressure on the hand during cutting. Made from VG-10, the blade has a hollow-ground edge with a weight reducing swedge-grind extending mid-spine to the tip. It is available in PlainEdge. Its ambidextrous wire-tension pocket clip sets the Poliwog tip-up in the pocket.

Intended use: Sporting / EDC

Type of production: Industrial
Blade Production: Japan
Blade: in VG10 stainless steel
Blade Treatment: -
Handle: in steel
Blade length: 55mm.
Blade thickness: 3mm.
Closed length: 86mm.
Total length: 145mm.
Thickness when closed: -
Balance: -
Weight: 116g.
Closure: Ball Bearing Lock™
Clip: Reversible and removable, in stainless steel
Sheath: -
Packaging: Cardboard box with Spyderco logos
Notes: -

KNIFE WITHDRAWN FROM PRIVATE COLLECTION

Type: Previously Purchased
Condition: Like New
Available in stores: YES
Sharpening: Original
Marks on blade: NO
Marks on handle: NO
Packaging: YES
Checked and Certified by our internal laboratory
Intended use: Sport / EDC

Type of production: Industrial
Country of production: Taiwan
Blade: In CTS-XHP stainless steel with full flat sharpening
Blade treatment: satin finish
Handle: FRN Fiberglass Reinforced Nylon bearing
Blade length: 71mm.
Blade thickness: 2mm.
Closed length: 91mm.
Total length: 163mm.
Closed thickness: 7.5mm.
Weight: 60g.
Closure: Back Lock
Clip: in stainless steel, flush, removable and reversible
Packaging: cardboard box with Spyderco logos
Note: Design by Sal Glesser

Spyderco's Smock Knife is one of the most anticipated knives of recent times. Crafted in collaboration with renowned knifemaker Kevin Smock, the knife features a unique design that combines an elegant front opening and a push-button actuated Compression Lock locking mechanism.

Kevin Smock, a knife enthusiast since childhood, began customizing stock knives in 2012 and has subsequently developed his skills in craft knife making. His passion for knives is combined with his experience in product design, leading to the creation of innovative and unconventional knives.

Intended use: Sport/EDC

Type of production: Industrial
Blade production: Taiwan
Blade: CPM-S30V stainless steel
Blade treatment: -
Handle: Carbon Fiber
Blade length: 75mm.
Blade thickness: 3mm.
Closed length: 115mm.
Total length: 200mm.
Closed thickness: 11mm.
Balancing: -
Weight: 104g.
Closure: Compression Lock
Clips: Stainless steel
Scabbard: -
Packaging: Cardboard box with Spyderco logos
Note: -

KNIFE WITHDRAWAL FROM A PRIVATE COLLECTION
* Type: Previously purchased
* Condition: in like new condition
* Commercially available: discontinued
* Sharpening: factory sharpening
* Marks on blade: no marks
* Marks on the handle: no marks
* Box: original ZT box
* Manuals, Certificates and Warranties: -
* Checked and certified by our internal laboratory Coltelleria Collini

Intended use: Sports / Collection

Type of production: Industrial
Production Lama: USA
Blade: CTS-204P stainless steel
Blade treatment: stone washed and satin finish
Handle: Titanium with anodized spacers
Blade length: 87mm.
Blade thickness: 4mm.
Closed length: 112mm.
Total length: 193mm.
Thick when closed: 14mm.
Weight: 178g.
Closure: Framelock
Clip: Removable, reversible, in stainless steel
Packaging: cardboard box with Zero Tolerance logos
Notes: Design by Dmirty Sinkevich - KVT opening on ball bearings

Knife withdrawn from private collection - Model produced from 2012 to 2016 now no longer available - Specimen in like new condition, supplied with original box - Some small signs of wear on the rear handle, at the height of where the clip rests against the titanium - Checked and certified by our in-house laboratory




Intended Use: Sporting

Production type: Industrial
Country of manufacture: Taiwan
Blade: Stainless steel CTS-XHP
Blade finish: Stone Washed
Handle: Titanium
Blade length: 65mm.
Blade thickness: 4.5mm.
Length closed: 87mm.
Total length: 152mm.
Thickness when closed: -
Weight: 102g.
Closure: Frame Lock
Clip: Stainless Steel
Packaging: Cardboard box with Spyderco logos
Notes: Design by Marcin Slysz - Knife withdrawn from private collection in like-new condition

Intended use: sports

Type of production: Industrial
Country of production: Taiwan
Blade: stainless steel CTS-XHP
Blade treatment: Stonewashed
Handle: Titanium
Blade length: 64mm.
Blade thickness: 3.5mm.
Closed length: 88mm.
Total length: 152mm.
Thick when closed: -
Weight: 99g.
Closure: R.I.L. Reeve Integral Lock (Frame Lock)
Clip: removable and reversible, in stainless steel
Packaging: Cardboard box with Spyderco logos
Notes: Design by Marcin Slysz

Intended use: Sports / Collection

Type of production: Industrial
Country of production: USA
Blade: CPM-20CV stainless steel
Blade treatment: Satin
Handle: Titanium
Blade length: 83mm.
Blade thickness: 3mm.
Length closed: 112mm.
Total length: 191mm.
Thickness when closed: -
Weight: 80g.
Closure: Framelock
Clip: Removable, made of stainless steel
Packaging: cardboard box with Zero Tolerance logos
Notes: KVT opening on ball bearings - Carson Flipper opening system - Sprint Run 2019 edition available while stocks last

Intended use: Sports / Collection

Type of production: Industrial
Country of production: USA
Blade: CPM-20CV stainless steel
Blade treatment: stone washed and satin finish
Handle: Titanium with marbled carbon fiber insert
Blade length: 86mm.
Blade thickness: 3mm.
Length closed: 112mm.
Total length: 198mm.
Weight: 95g.
Closing: FrameLock with stainless steel knocker
Clip: Stainless steel. removable and reversible
Packaging: cardboard box with Zero Tolerance logos
Notes: Design by Dmirty Sinkevich - KVT opening on ball bearings - Carson Flipper opening system

Intended use: Sports / EDC

Type of production: Industrial
Country of production: Taiwan
Blade: CTS-XHP stainless steel with full flat sharpening
Blade treatment: satin finish
Handle: FRN Fiberglass Reinforced Load-bearing nylon
Blade length: 71mm.
Blade thickness: 2mm.
Length closed: 91mm.
Total length: 163mm.
Thick when closed: 16mm.
Weight: 60g.
Closure: Back Lock
Clip: stainless steel, flush, removable and reversible
Packaging: cardboard box with Spyderco logos
Notes: Design by Sal Glesser

Purpose: Sportsman / Collectibles

Type of production: Industrial
Country of production: U.S.A.
Blade: Stainless steel CPM S35VN 60 / 61HRC
Blade Treatment: Stonewash
Manicure: Titanium
Blade Length: 89mm.
Blade thickness: 4mm.
Closed length: 96mm.
Total length: 119mm.
Closed thickness: 13mm.
Weight: 155g.
Closure: Frame Lock
Clip: Removable, multiposition, stainless steel
Packing: cardboard box with Zero Tolerance logos
Notes: Design by Todd Rexford - KVT opening on ball bearings

Intended Use: Sport / Collection

Type of production: Industrial
Country of production: USA
Blade: CTS Maxamet Tool Steel 67/68HRC
Handle: FRN Lightweight
Blade length: 75mm.
Blade thickness: 3mm.
Closed Length: 98mm.
Overall length: 175mm.
Thick when closed: 14mm.
Weight: 70g.
Locking System: Back Lock
Clips: stainless steel
Packaging: cardboard box with logos Spyderco
Notes: limited edition sprint run

Intended use: Sports

Type of production: Industrial
Production Country: China
Blade: CTS-BD1 stainless steel
Blade treatment: Satin finish
Handle: Stainless steel and G-10
Blade length: 84mm.
Blade thickness: 3.2mm.
Closed Length: 115mm.
Overall length: 198mm.
Thick when closed: 16mm.
Weight: 111g.
Lock: Liner Lock
Clip: Removable and reversible, stainless steel
Packaging: cardboard box with Spyderco logos
Notes: -

Intended use: Sports / Collection

Type of production: Industrial
Production Country: Taiwan
Blade: Stainless steel LC200N high corrosion resistance
Blade treatment: Stone Washed
Handle: Titanium
Blade length: 84mm.
Blade thickness: 3.0mm.
Closed Length: 113mm.
Overall length: 198mm.
Thick when closed: 12mm.
Weight: 108g.
Lock: Frame Lock
Clips: stainless steel, removable and reversible
Packaging: cardboard box with Spyderco logos
Notes: Design by Marcin Slysz

Intended use: Sports / Collection

Type of production: Industrial
Production Country: Taiwan
Blade: Stainless steel CTS-XHP
Blade treatment: Satin finish
Handle: Titanium
Blade length: 87mm.
Blade thickness: 3.5mm.
Closed Length: 111mm.
Overall length: 198mm.
Thick when closed: 12mm.
Weight: 122g.
Lock: Frame Lock
Clips: stainless steel, removable and reversible
Packaging: cardboard box with Spyderco logos
Notes: Design by Marcin Slysz

Intended use: Sports / Collection

Type of production: Industrial
Country of Origin: USA
Blade: stainless steel S35VN
Blade treatment: Stonewash
Handle: Titanium
Blade length: 95mm.
Blade thickness: 4mm.
Closed Length: 127mm.
Overall length: 222mm.
Thick when closed: -
Weight: 141g.
Closing: Framelock
Clip: Removable, reversible, titanium
Packaging: cardboard box with Zero Tolerance logos
Notes: Design by Gustavo T. Cecchini GTC Knives - Opening KVT on ball bearings - Opening system SLT Spring Loaded Tab

Intended use: Sports / Tactical

Type of production: Industrial
Country of Origin: USA
Blade: stainless steel CPM-20 CV
Blade treatment: Stonewash
Handle: Titanium
Blade length: 99mm.
Blade thickness: 3mm.
Closed Length: 130mm.
Overall length: 229mm.
Thick when closed: -
Weight: 153g.
Closing: Framelock
Clip: Removable, reversible, anodized titanium
Packaging: cardboard box with Zero Tolerance logos
Notes: Design by Les George - Opening KVT on ball bearings - Carson Flipper opening system

Intended use: Sports / Collection

Type of production: Industrial
Country of Origin: USA
Blade: stainless steel CPM-S35VN 59 / 61HRC
Blade treatment: stonewashed
Handle: Titanium
Blade length: 89mm.
Blade thickness: 4mm.
Closed Length: 124mm.
Overall length: 213mm.
Weight: 177g.
Lock: Frame Lock
Clip: Removable, reversible, stainless steel
Packaging: cardboard box with Zero Tolerance logos
Notes: Design by Jens Anso - Opening KVT on ball bearings

Intended use: Sport / EDC

Type of production: Industrial
Country of production Taiwan
Blade: stainless steel CPM-S30V
Treatment Blade: Stonewashed
Handle: Titanium
Blade length: 33mm.
Blade thickness: 3mm.
Closed Length: 51mm.
Total length: 84mm.
Thick when closed: 4mm
Balancing: -
Weight: 31g.
Closure: Frame Lock
Clip: -
Sheath: -
Packaging: Cardboard box with logos Spyderco
Notes: Design by Darriel Caston

Intended use: Sport / Collection

Type of production: Industrial
Production Country: USA
Blade: Stainless steel Elmax 59 / 61HRC
Treatment blade: Blackwashwash
Handle: Titanium
Blade length: 89mm.
Blade thickness: 4mm.
Closed Length: 96mm.
Overall length: 119mm.
Thick when closed: 13mm.
Weight: 165g.
Closure: Frame Lock
Clip: Removable, multi-position, stainless steel
Packaging: cardboard box with logos Zero Tolerance
Notes: Design by Todd Rexford - Opening KVT ball-bearing

Utilisation prévue: Sport / Collection

Type de production: industriel
Pays de production: États-Unis
Lame: Acier inoxydable Elmax 59 / 61HRC
Lame de traitement: Stonewash
Poignée: Titane
Longueur de la lame: 89mm.
Épaisseur de lame: 4mm.
Longueur fermée: 96mm.
Longueur totale: 119mm.
Épais lorsqu'il est fermé: 13mm.
Poids: 165g.
Fermeture: Frame Lock
Clip: amovible, multi-positions, en acier inoxydable
Conditionnement: boîte en carton avec des logos Zero Tolerance
Notes: Design by Todd Rexford - Ouverture KVT roulement à billes

The Zero Tolerance 0808 is our latest piece of pocket technology. It's a collaboration between ZT and custom knifemaker Todd Rexford and is based on his Cesium model. But the technology here isn’t circuits and wires. Instead, it’s advanced-formula stainless steel and ZT’s smooth-as-silk KVT opening system.

The 0808’s blade is built of Crucible S35VN stainless steel. This powdered metallurgy steel is extremely fine-grained so it can be sharpened to a razor edge. Added niobium and nitrogen enhance toughness to resist chipping and provide excellent edge retention. Yet it’s also easy to re-sharpen.

Opening is fast and simple with KVT. Caged ball bearings surround the pivot to make the blade quick and easy to open using the built-in flipper. With KVT, the 0808 is as easy to open as any assisted knife, but without the need for a spring.

The 0808’s blade is paired with chamfered titanium handles that provide a solid, and very durable, grip. The sturdy frame lock has a hardened steel lockbar insert to offer extra-secure, extra-solid blade lock up. The reversible pocketclip enables you to carry comfortably left- or right-handed. Move over, iPhone. The 0808 deserves pocket space.

Rexford Folder Titanium - ZT0808 - knife

Intended use: Sport / Collection

Type of production: Industrial
Production Lama USA
Blade: Stainless steel CPMS35 59 / 61HRC
Treatment Lama: -
Handle: Titanium
Blade length: 80mm.
Blade thickness: 4mm.
Length closed: 111mm.
Overall length: 190mm.
Thick when closed: -
Balancing: -
Weight: 126g.
Closure: Frame Lock
Clip: Removable, multi-position, stainless steel
Sheath: -
Packaging: cardboard box with logos Zero Tolerance
Notes: Design by Rexford - Opening KVT ball-bearing

Zero Tolerance - Les George Folder Titanium - ZT0900 - knife

Intended use: Sport / Collection

Type of production: Industrial
Production Lama USA
Blade: Stainless steel CPMS35 59 / 61HRC
Treatment Lama: stonewash
Handle: Titanium
Blade length: 69mm.
Blade thickness: 4mm.
Closed Length: 96mm.
Overall length: 166mm.
Thick when closed: -
Balancing: -
Weight: 124g.
Closure: Frame Lock
Clip: Removable, multi-position, stainless steel
Sheath: -
Packaging: cardboard box with logos Zero Tolerance
Notes: Design by Les George - Opening KVT ball-bearing

Intended Use: Collection

Type of production: industrial
Blade: D.P.S.15 rolled stainless steel damascus with VG-10 58HRC cutting edge
Country of manufacture: Japan
Handle: brushed titanium
Blade length: 97mm.
Blade thickness: 3mm.
Length closed: 107mm.
Total length: 222mm.
Weight: 119g.
Closure: Back Lock
Clip: removable, multi-position, stainless steel
Packaging: leatherette zippered pouch with Spyderco logos
Notes: the blade is made of a special 31-layer steel produced by Takefu Special Steel Company Ltd.

Intended Use: Collection

Type of production: Industrial
Blade: Damascus steel laminate DPS15 with sharp VG-10 58HRC
Treatment Lama: -
Production Lama: Japan
Handle: Titanium brushed
Blade length: 75mm.
Blade Thickness: 2.5mm.
Closed Length: 107mm.
Overall length: 180mm.
Balancing: -
Weight: 88g.
Closure: Back Lock
Clip: Removable, multi-position, stainless steel
Sheath: -
Note: the blade is made in a special steel with 31 layers produced by Takefu Special Steel Company Ltd.

Intended Use: Sport / EDC

Type of production: Industrial
Production Blade: Taiwan
Blade: Stainless steel CTS-XHP
Treatment Blade: -
Handle: Carbon Fiber Laminate + G10 and Titanium
Blade length: 80mm.
Blade thickness: 3mm.
Closed Length: 116mm.
Overall length: 195mm.
Thickness when folded: -
Balancing: -
Weight: 119g.
Lock: Frame Lock R.I.L. (Reeve Integral Lock)
Clip: Multi position and removable stainless steel
Sheath: -
Packaging: Cardboard box with logos Spyderco
Notes: Design by Eric Glesser - Opening patented by Carson Flipper - Pivot on ball bearings - Pivot sur roulements à billes

Intended use: sailboat

Type of production: Industrial
Production Blade: Taiwan
Blade: stainless nitrogen LC200N
Treatment Blade: -
Handle: Titanium
Blade length: 60mm.
Blade thickness: 3mm.
Closed Length: 106mm.
Overall length: 166mm.
Thick when closed: -
Balancing: -
Weight: 119g.
Lock: Frame Lock the blade and Ceramic Ball Lock on scioglinodi
Clip: Multiposition and removable stainless steel
Sheath: -
Packaging: Cardboard box with logos Spyderco
Notes: With schackle key and marlin spike

Blade: CPM-S30V Stainless Steel
Handle: Carbon Fiber and G10 Laminate
Blade Length: 117mm.
Blade Thickness: 4mm.
Overall Length: 260mm.
Weight: 196g.
Lock: Compression Lock
Clip: Stainless Steel
Sheath: -
Notes: Design by Laci Szabo

Intended use: Sport

Type of production: industrial
Blade: stainless steel VG-10
Treatment Lama: -
Blade Production: Japan
Handle: Stainless Steel
Blade length: 95mm.
Blade Thickness: 3mm.
Closed Length: 125mm.
Overall Length: 220mm.
Balance: -
Weight: 161g.
Closure: Back Lock
Clip: Removable, multi-position, stainless steel
Sheath: -
Notes: -

Spyderco - Air by Gayle Bradley - C159GF - knife

Intended use: EDC / Sports
Type of production: Industrial
Production Blade: Taiwan
Blade: Stainless Steel CPM-M4
Treatment Lama: -
Handle: Titanium and Glass Fiber
Blade length: 65mm.
Blade thickness: 2.3mm.
Closed Length: 87mm.
Total length: 151mm.
Thick when closed: -
Balance: -
Weight: 37g.
Lock: Liner
Lock Clip: -
Sheath: -
Packaging: Cardboard box with logos Spyderco
Notes: Design by Gayle Bradley

Spyderco - Techno by Marcin Slysz - C158TI knife

Intended use: Sport

Type of production: Industrial
Production Blade: Taiwan
Blade: stainless steel CTS-XHP
Treatment Blade: Stone Washed
Handle: Titanium
Blade length: 65mm.
Blade thickness: 4.5mm.
Closed Length: 87mm.
Total length: 152mm.
Thick when closed: -
Balance: -
Weight: 102g.
Closure: Frame Lock
Clip: Stainless Steel
Sheath: -
Packaging: Cardboard box with logos Spyderco
Notes: Design by Marcin Slysz

Destinazione d'uso: EDC/Sportivo

Tipo di produzione: Industriale
Produzione Lama: Japan
Lama: in acciaio inox VG-10
Trattamento Lama: -
Manicatura: acciaio inox
Lunghezza lama: 58mm.
Spessore lama: 2mm.
Lunghezza chiuso: 80mm.
Lunghezza totale: 140mm.
Spessore da chiuso: -
Bilanciatura: -
Peso: 74g.
Chiusura: Back Lock
Clip: in acciaio inox, amovibile
Fodero: -
Confezione: Scatola di cartone con loghi Spyderco
Note: -

Intended use: Sport

Type of production: industrial
Blade: stainless steel ZDP-189
Treatment Lama: -
Blade Production: Japan
Handle: FRN Grey with stainless steel liners drowned
Blade length: 95mm.
Blade Thickness: 3mm.
Closed Length: 125mm.
Overall Length: 220mm.
Balance: -
Weight: 104g.
Closure: Back Lock
Clip: Removable, multi-position, stainless steel
Sheath: -
Notes: -

Spyderco - Police Steel - C07P - knife

Intended use: Sport

Type of production: Industrial
Blade Production: Japan
Blade: Stainless steel VG-10
Treatment Lama: -
Handle material: steel
Blade length: 100mm.
Blade thickness: 3mm.
Length closed: 135mm.
Total length: 235mm.
Thick when closed: 8mm
Balance: -
Weight: 158g.
Closure: Back Lock
Clip: Stainless Steel
Sheath: -
Packaging: cardboard box with logos Spyderco
Notes: