Knives, collection knife, tactical knives, outdoor knives, pocket knives and tools
-
CRKT - M16-12LE knife Small Law Enforcement Tanto - PRIVATE COLLECTION - knife
KNIFE RETIRED FROM PRIVATE COLLECTION
* Provenance: Collected by a private individual, previously purchased
* Condition: Overall in very good condition
* Commercially available: Discontinued
* Sharpness: Factory
* Marks on blade: small marks on tip
* Marks on handle: clip slightly marked
* Box: Without box
* Sheath: /
* Manuals, Certificates and Warranties: -
* Checked and Certified by our internal laboratoryBlade: Teflon-coated AUS-8 high-carbon 57/58HRC stainless steel
Handle: Zytel grips
Blade length: 76 mm.
Blade thickness: 3 mm.
Total length: 185mm.
Weight: 97g.
Closure: Liner Lock
Clip: Stainless Steel
Notes: equipped with safety catchAP-CM16-12LE -
CRKT - P.S.D. II (Particle. Separation. Device.) by Hammond - AUS-10 & Brown G10 - 7910 - knife
Jim Hammond's original P.S.D. earned its name (Particle. Separation. Device.) for its ability to cut anything, anywhere. The P.S.D. II brings that same capability to a smaller, more portable folding knife, reducing the overall length by more than an inch. The blade is made of corrosion-resistant AUS10 with assisted opening on IKBS ball bearings that ensure quick and easy one-handed operation.
Intended Use: Tactical / EDC
Production Type: Industrial
Country of Production: Taiwan
Blade: Stainless steel AUS-10A
Blade Treatment: Black Oxide
Handle: G10
Blade Length: 76mm.
Blade thickness: 2.8mm.
Length closed: 101mm.
Total length: 178mm.
Weight: 102g.
Closure: Liner Lock
Clip: stainless steel, removable
Packaging: cardboard box with CRKT logos
Notes: Design by Jim Hammond - Assisted opening via Carson Flipper system and IKBS ball bearing movementC7910 -
CRKT - A.B.C. (All. Bases. Covered.) by Hammond - 12C27 & Black G10 - 2606 - knife
Jim Hammond's A.B.C. (All. Bases. Covered.) makes its return in an even more versatile form. It is now a folder, bringing the varied capabilities of the original fixed blade into a more convenient and compact design. With its assisted opening and IKBS pads, it's always ready for action at any time, while the G10 handle provides a strong grip even in adverse weather conditions.
Intended Use: Tactical
Production Type: Industrial
Country of Production: China
Blade: Sandvik 12C27 stainless steel
Blade treatment: Black Oxide
Handle: G10
Blade Length: 85.9mm.
Blade thickness: 3.1mm.
Length closed: 116mm.
Total length: 203mm.
Weight: 110g.
Closure: Liner Lock
Clip: stainless steel, removable
Packaging: cardboard box with CRKT logos
Notes: Design by Jim Hammond - Assisted opening via Carson Flipper system and IKBS ball bearing movementC2606 -
MKM - Isonzo Clip Point by Vox - M390 & Marble Carbon Fiber - FX03M-3CM - knife
Small and compact, but of impetuous personality, with its jerks, curves and counter-curves, Isonzo is inspired by the magnificent river that bursts through the gates of the Eastern Alps.
The blade is made of Bohler M390 satin-finished steel, with a cleaver tip. Handle is marbled carbon fiber with reversible stainless steel clip. Spacer in blue anodized titanium, ring on center screw in blue anodized titanium stainless steel. Opening system is with thumb hole. Sold with 6/8 torx key and Cordura sheath with zipper and belt loop.
Intended Use: Sporting
Type of production: Industrial
Country of manufacture: Italy
Blade: M390 58/60HRC stainless steel
Blade finish: Satin finish
Handle: Marbled carbon fiber with blue anodized titanium spacer and screw pin
Blade length: 49mm.
Blade thickness: 3mm.
Length closed: 87m.
Total length: 145mm.
Thickness when closed: 13mm
Weight: 70g.
Security system: Liner Lock
Opening system: on ball bearings
Clip: stainless steel, flush, removable and reversible
Packaging: Cardboard box with MKM Maniago Knife Makers logos - Nylon pouch with Zip
Notes: Design by Jesper VoxnaesMK-FX03M-3CM -
MKM - Isonzo Hawkbill by Vox - M390 & Marble Carbon Fiber - FX03M-1CM - knife
Small and compact, but of impetuous personality, with its jerks, curves and counter-curves, Isonzo is inspired by the magnificent river that bursts through the gates of the Eastern Alps.
The blade is made of Bohler M390 satin-finished steel, with an hawkbill tip. Handle is marbled carbon fiber with reversible stainless steel clip. Spacer in blue anodized titanium, ring on center screw in blue anodized titanium stainless steel. Opening system is with flipper or thumb hole. Sold with 6/8 torx key and Cordura sheath with zipper and belt loop.
Intended Use: Sporting
Type of production: Industrial
Country of manufacture: Italy
Blade: M390 58/60HRC stainless steel
Blade finish: Satin finish
Handle: Marbled carbon fiber with blue anodized titanium spacer and screw pin
Blade length: 49mm.
Blade thickness: 3mm.
Length closed: 87m.
Total length: 145mm.
Thickness when closed: 13mm
Weight: 70g.
Security system: Liner Lock
Opening system: on ball bearings
Clip: stainless steel, flush, removable and reversible
Packaging: Cardboard box with MKM Maniago Knife Makers logos - Nylon pouch with Zip
Notes: Design by Jesper VoxnaesMK-FX03M-1CM -
MKM - Isonzo Cleaver by Vox - M390 & Marble Carbon Fiber - FX03M-2CM - knife
Small and compact, but of impetuous personality, with its jerks, curves and counter-curves, Isonzo is inspired by the magnificent river that bursts through the gates of the Eastern Alps.
The blade is made of Bohler M390 satin-finished steel, with a cleaver tip. Handle is marbled carbon fiber with reversible stainless steel clip. Spacer in blue anodized titanium, ring on center screw in blue anodized titanium stainless steel. Opening system is with thumb hole. Sold with 6/8 torx key and Cordura sheath with zipper and belt loop.
Intended Use: Sporting
Type of production: Industrial
Country of manufacture: Italy
Blade: M390 58/60HRC stainless steel
Blade finish: Satin finish
Handle: Marbled carbon fiber with blue anodized titanium spacer and screw pin
Blade length: 49mm.
Blade thickness: 3mm.
Length closed: 87m.
Total length: 145mm.
Thickness when closed: 13mm
Weight: 70g.
Security system: Liner Lock
Opening system: on ball bearings
Clip: stainless steel, flush, removable and reversible
Packaging: Cardboard box with MKM Maniago Knife Makers logos - Nylon pouch with Zip
Notes: Design by Jesper VoxnaesMK-FX03M-2CM -
MKM - Vincent by Vox - Top Shield N690Co & Black G10 - VCN-GBB - knife
The blade shapes of this new folding knife designed by Jesper Voxnaes are reminiscent of ancient times when pirates sailed the seas with their precious swords at their side, maestone and ready to accomplish any task! The blade is BOHLER N690Co with black Black Top Shield cover and G10 handle for the best possible grip.
Intended Use: Sporting
Type of production: Industrial
Country of manufacture: Italy
Blade: N690Co 58/60HRC stainless steel
Blade treatment: Black Top Shield
Handle: G10, with embedded stainless steel liners and anodized aluminum spacer
Blade length: 62mm.
Blade thickness: 3.2mm.
Length closed: 106mm.
Total length: 175mm.
Thickness when closed: 13mm.
Weight: 100g.
Closure: LinerLock
Clip: stainless steel, removable and reversible
Sheath: nylon pouch with zipper
Packaging: cardboard box with MKM logos
Notes: Design by Jesper VOX VoxnaesMK-VCN-GBB -
MKM - Flame Light by Zieba - M390 & Green Micarta - FL02L-GC - knife
FLAME LIGHT, practical folding knife and now even lighter!
BOHLER M390 dark stone washed steel dagger point blade, flipper opening with ball bearing rotation mechanism and Liner lock system. Stonewashed stainless steel spacer and clip, stainless steel hardware and ring on bronze anodized titanium center pin. Black canvas micarta handle. Sold with zippered nylon sheath and belt loop.
Intended Use: Sporting
Type of production: Industrial
Country of manufacture: Italy
Blade: Bohler M390 stainless steel
Blade finish: Stonewashed
Handle: Micarta
Blade length: 72mm.
Blade thickness: 2.5mm.
Total length: 176mm.
Weight: 55g.
Opening: Carson Flipper system
Washers: steel, with ball bearings
Closure: Liner Lock
Clip: stainless steel, removable and reversible
Sheath: cordura
Packaging: Cardboard box with MKM logos
Notes: Design by Michael ZiebaMK-FL02L-GC -
CRKT - CEO MicroFlipper Sheepfoot by Rogers - 7083 - knife
The smaller version of the popular CEO folding knife, the Microflipper combines refined style with maximum practicality. It may be small, but it's a serious contender for any job thanks to its lightweight aluminum handle and razor-sharp blade made of Sandvik 12C27™ steel.
This stylish pocket knife is available in two versions: drop-point blade with silver aluminum handle and blue coating, or sheepfoot blade with blue aluminum handle and silver coating.
* Superior performance: Sandvik 12C27™ steel for excellent edge retention.
* Smooth opening: IKBS™ ball-bearing motion allows smooth blade opening.
* Fast opening: Flipper opening system deploys the blade quickly.
* Sturdy and lightweight: Aluminum handle combines strength and minimal weight
* Easy closing: The blade can be easily closed with one hand.
* Carrying options: Adjustable ambidextrous clip for carrying in left or right pocket
Intended Use: EDC / Sporting
Production Type: Industrial
Country of Production: China
Blade: Sandivk 12C27 stainless steel
Blade Finish: Satin finish
Handle: Aluminum
Blade length: 56mm.
Blade thickness: 2.2mm.
Length closed: 82mm.
Total length: 140mm.
Weight: 48g.
Closure: Liner Lock
Clip: stainless steel, removable and reversible
Packaging: cardboard box with CRKT logos
Notes: Design by Richard Rogers - Carson Flipper opening system on IKBS ball bearingsC7083 -
CRKT - CEO MicroFlipper Drop Point by Rogers - 7081 - knife
The smaller version of the popular CEO folding knife, the Microflipper combines refined style with maximum practicality. It may be small, but it's a serious contender for any job thanks to its lightweight aluminum handle and razor-sharp blade made of Sandvik 12C27™ steel.
This stylish pocket knife is available in two versions: drop-point blade with silver aluminum handle and blue coating, or sheepfoot blade with blue aluminum handle and silver coating.
* Superior performance: Sandvik 12C27™ steel for excellent edge retention.
* Smooth opening: IKBS™ ball-bearing motion allows smooth blade opening.
* Fast opening: Flipper opening system deploys the blade quickly.
* Sturdy and lightweight: Aluminum handle combines strength and minimal weight
* Easy closing: The blade can be easily closed with one hand.
* Carrying options: Adjustable ambidextrous clip for carrying in left or right pocket
Intended Use: EDC / Sporting
Production Type: Industrial
Country of Production: China
Blade: Sandivk 12C27 stainless steel
Blade Finish: Satin finish
Handle: Aluminum
Blade length: 60mm.
Blade thickness: 2.2mm.
Length closed: 82mm.
Total length: 143mm.
Weight: 48g.
Closure: Liner Lock
Clip: stainless steel, removable and reversible
Packaging: cardboard box with CRKT logos
Notes: Design by Richard Rogers - Carson Flipper opening system on IKBS ball bearingsC7081 -
MKM - Flame Light by Zieba - M390 & Black Micarta - FL02L-BC - knife
FLAME LIGHT, practical folding knife and now even lighter!
BOHLER M390 dark stone washed steel dagger point blade, flipper opening with ball bearing rotation mechanism and Liner lock system. Stonewashed stainless steel spacer and clip, stainless steel hardware and ring on bronze anodized titanium center pin. Black canvas micarta handle. Sold with zippered nylon sheath and belt loop.
Intended Use: Sporting
Type of production: Industrial
Country of manufacture: Italy
Blade: Bohler M390 stainless steel
Blade finish: Stonewashed
Handle: Micarta
Blade length: 72mm.
Blade thickness: 2.5mm.
Total length: 176mm.
Weight: 55g.
Opening: Carson Flipper system
Washers: steel, with ball bearings
Closure: Liner Lock
Clip: stainless steel, removable and reversible
Sheath: cordura
Packaging: Cardboard box with MKM logos
Notes: Design by Michael ZiebaMK-FL02L-BC -
CRKT - Carson M16-13DSFG Tan Special Forces - PRIVATE COLLECTION - pocket knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased.
* Condition: Overall in very good condition.
* Commercially available: Discontinued
* Sharpening: Factory sharpened
* Marks on blade: A couple of small marks on Tan-colored finish, unnoticeable
* Marks on handle: None
* Box: Present
* Scabbard: /
* Manuals, Certificates and Warranties: Present
* Checked and Certified by our in-house laboratory
Intended Use: Sporting/TacticalProduction Type: Industrial
Country of Production: China
Blade: Stainless steel AUS-8
Blade Finish: Tan Oxide
Handle: PVD steel folders with G10 Tan grips
Blade length: 100mm.
Blade thickness: 3.5mm.
Length closed: 140mm.
Total length: 240mm.
Weight: 150g.
Opening: Carson Flipper system
Closure: Liner Lock with auto LAWKS security system
Clip: multi-position, removable, Black Oxide stainless steel
Packaging: cardboard box with CRKT logos
Notes: Design by Kit Carson - Carson Flipper opening systemM16-13DSFG-CP -
MKM - Goccia Flipper by Jens Anso - Dark Stonewashed Titanium - MK-GC-TDSW - knife
GOCCIA packs a sleek look into a sturdy frame with incredible ergonomics.
With this design by Jens Anso we would like to pay homage to one of the essential elements that gave rise to the production of knives in Maniago, Water, which in 1453 moved the hammers to forge the first blades and which has guided the evolution of our craft tradition. The concentric ellipses worked in 3D on the handle recall the ripples created by a drop falling into the water, forms and moments of liquid energy: origin and propagation of water.
Intended Use: Sporting
Production type: Industrial
Country of Production: Italy
Blade: Stainless steel M360 61HRC
Blade Treatment: Dark Stonewashed
Handle: Dark Stonewashed Titanium with anodized titanium spacer
Blade length: 85mm.
Blade thickness: 4mm.
Length closed: 115mm.
Total length: 200mm.
Thickness when closed: 15mm
Weight: 135g.
Closure: LinerLock
Clip: anodized titanium, deep pocket, removable
Sheath: nylon pouch with zipper
Packaging: cardboard box with MKM logos
Notes: Design by Jens AnsoMK-GC-TDSW -
MKM - Goccia Flipper by Jens Anso - Bronze Titanium - MK-GC-TBR - knife
GOCCIA packs a sleek look into a sturdy frame with incredible ergonomics.
With this design by Jens Anso we would like to pay homage to one of the essential elements that gave rise to the production of knives in Maniago, the water, which in 1453 moved the hammers to forge the first blades and which has guided the evolution of our craft tradition. The concentric ellipses worked in 3D on the handle recall the ripples created by a drop falling into the water, forms and moments of liquid energy: origin and propagation of water.
Intended Use: Sporting
Production type: Industrial
Country of Production: Italy
Blade: Stainless steel M360 61HRC
Blade treatment: satin finish
Handle: Bronze anodized titanium with stonewashed titanium spacer
Blade length: 85mm.
Blade thickness: 4mm.
Length closed: 115mm.
Total length: 200mm.
Thickness when closed: 15mm
Weight: 135g.
Closure: LinerLock
Clip: stonewashed titanium, deep pocket, removable
Scabbard: nylon pouch with zipper
Packaging: cardboard box with MKM logos
Notes: Design by Jens AnsoMK-GC-TBR -
MKM - Goccia Flipper by Jens Anso - Black G10 - MK-GC-GBK - knife
GOCCIA packs a sleek look into a sturdy frame with incredible ergonomics.
With this design by Jens Anso we would like to pay homage to one of the essential elements that gave rise to the production of knives in Maniago, the water, which in 1453 moved the hammers to forge the first blades and that has guided the evolution of our craft tradition. The concentric ellipses worked in 3D on the handle recall the ripples created by a drop falling into the water, forms and moments of liquid energy: origin and propagation of water.
Intended Use: Sporting
Production type: Industrial
Country of Production: Italy
Blade: Stainless steel M360 61HRC
Blade treatment: satin finish
Handle: G10, with stainless steel embedded liners and anodized titanium spacer
Blade length: 85mm.
Blade thickness: 4mm.
Length closed: 115mm.
Total lenght: 200mm.
Thickness when closed: 15mm
Weight: 110g.
Closure: LinerLock
Clip: anodized titanium, deep pocket, removable
Sheath: Nylon pouch with zipper
Packaging: cardboard box with MKM logos
Notes: Design by Jens AnsoMK-GC-GBK -
MKM - Goccia Flipper by Jens Anso - Green Canvas Micarta - MK-GC-GC - knife
GOCCIA packs a sleek look into a sturdy frame with incredible ergonomics.
With this design by Jens Anso we would like to pay homage to one of the essential elements that gave rise to the production of knives in Maniago, Water, which in 1453 moved the hammers to forge the first blades and which has guided the evolution of our craft tradition. The concentric ellipses worked in 3D on the handle recall the ripples created by a drop falling into the water, forms and moments of liquid energy: origin and propagation of water.
Intended Use: Sporting
Production type: Industrial
Country of Production: Italy
Blade: Stainless steel M360 61HRC
Blade treatment: Satin finish
Handle: Micarta, with stainless steel embedded liners and titanium spacer
Blade length: 85mm.
Blade thickness: 4mm.
Length closed: 115mm.
Total length: 200mm.
Thickness when closed: 15mm
Weight: 110g.
Closure: LinerLock
Clip: Titanium, deep pocket, removable
Sheath: nylon pouch with zipper
Packaging: cardboard box with MKM logos
Notes: Design by Jens AnsoMK-GC-GC -
CRKT - CEO Bamboo by Rogers - 7096YGK - knife
Intended use: Sports
Type of production: Industrial
Country of production: China
Blade: 8Cr13Mov 58/60 HRC stainless steel
Blade treatment: Blackwashed
Handle: Nylon reinforced with fiberglass
Blade length: 79mm.
Blade thickness: 2.2mm.
Length closed: 113mm.
Total length: 194mm.
Weight: 59g.
Closing: Liner Lock
Clip: stainless steel, removable and reversible
Packaging: cardboard box with CRKT logos
Notes: Design by Richard Rogers - IKBS ball bearing opening system - Winner of the 2019 Blade Show as "Best Buy Of The Year"C7096YGK -
MKM & Fox - Isonzo Clip Green by Vox - MK-FX03-3PGO - knife
Small and compact, but with impetuous personality, with his shots, with his curves and counter-curves, Isonzo is inspired by the magnificent river that breaks through the gaps of the Eastern Alps - Knife made by Fox
Intended use: Sports
Type of production: Industrial
Country of production: Italy
Blade: N690Co 59 / 60HRC stainless steel
Blade treatment: Black Idroglider
Handle: FRN
Blade length: 55mm.
Blade thickness: 3mm.
Length closed: 85m.
Total length: 141mm.
Thick when closed: 18mm
Weight: 60g.
Closure: Liner Lock
Opening system: on ball bearings
Spacer: in anodized aluminum
Clip: steel, flush, removable and reversible
Packaging: Cardboard box with MKM logos Maniago Knife Makers
Notes: Design by Jesper VoxnaesMK-FX03-3PGO -
MKM & Fox - Isonzo Clip Gray by Vox - MK-FX03-3PGY - knife
Small and compact, but with impetuous personality, with his shots, with his curves and counter-curves, Isonzo is inspired by the magnificent river that breaks through the gaps of the Eastern Alps - Knife made by Fox
Intended use: Sports
Type of production: Industrial by Fox Cutlery
Country of production: Italy
Blade: N690Co 59 / 60HRC stainless steel
Blade finish: Stonewashed
Handle: FRN
Blade length: 55mm.
Blade thickness: 3mm.
Length closed: 85m.
Total length: 141mm.
Thick when closed: 18mm
Weight: 60g.
Closure: Liner Lock
Opening system: on ball bearings
Spacer and details: in anodized aluminum
Clip: steel, flush, removable and reversible
Packaging: Cardboard box with MKM logos Maniago Knife Makers
Notes: Design by Jesper VoxnaesMK-FX03-3PGY -
MKM & Fox - Isonzo Cleaver Green by Vox - MK-FX03-2PGO - knife
Small and compact, but with impetuous personality, with his shots, with his curves and counter-curves, Isonzo is inspired by the magnificent river that breaks through the gaps of the Eastern Alps - Knife made by Fox
Intended use: Sports
Type of production: Industrial by Fox Cutlery
Country of production: Italy
Blade: N690 59 / 60HRC stainless steel
Blade finish: Black Idroglider
Handle: FRN
Blade length: 55mm.
Blade thickness: 3mm.
Length closed: 85m.
Total length: 141mm.
Thick when closed: 18mm
Weight: 60g.
Closure: Liner Lock
Opening system: on ball bearings
Spacer and details: in anodized aluminum
Clip: steel, flush, removable and reversible
Packaging: Cardboard box with MKM logos Maniago Knife Makers
Notes: Design by Jesper VoxnaesMK-FX03-2PGO -
MKM & Fox - Isonzo Cleaver Gray by Vox - MK-FX03-2PGY - knife
Small and compact, but with impetuous personality, with his shots, with his curves and counter-curves, Isonzo is inspired by the magnificent river that breaks through the gaps of the Eastern Alps - Knife made by Fox
Intended use: Sports
Type of production: Industrial by Fox Cutlery
Country of production: Italy
Blade: N690 59 / 60HRC stainless steel
Blade finish: Stonewashed
Handle: FRN
Blade length: 55mm.
Blade thickness: 3mm.
Length closed: 85m.
Total length: 141mm.
Thick when closed: 18mm
Weight: 60g.
Closure: Liner Lock
Opening system: on ball bearings
Spacer and details: in anodized aluminum
Clip: steel, flush, removable and reversible
Packaging: Cardboard box with MKM logos Maniago Knife Makers
Notes: Design by Jesper VoxnaesMK-FX03-2PGY -
MKM & Fox - Isonzo Hawkbill Gray by Vox - MK-FX03-1PGY - knife
Small and compact, but with impetuous personality, with his shots, with his curves and counter-curves, Isonzo is inspired by the magnificent river that breaks through the gaps of the Eastern Alps - Knife made by Fox
Intended use: Sports / TacticalType of production: Industrial by Fox Cutlery
Country of production: Italy
Blade: N690 59 / 60HRC stainless steel
Blade finish: Stonewashed
Handle: FRN
Blade length: 55mm.
Blade thickness: 3mm.
Length closed: 85m.
Total length: 141mm.
Thick when closed: 18mm
Weight: 60g.
Closure: Liner Lock
Opening system: Carson Flipper system on ball bearings
Spacer and details: in anodized aluminum
Clip: steel, flush, removable and reversible
Packaging: Cardboard box with MKM logos Maniago Knife Makers
Notes: Design by Jesper VoxnaesMK-FX03-1PGY -
MKM & Fox - Isonzo Hawkbill Green by Vox - MK-FX03-1PGO - knife
Small and compact, but with impetuous personality, with his shots, with his curves and counter-curves, Isonzo is inspired by the magnificent river that breaks through the gaps of the Eastern Alps - Knife made by Fox
Intended use: Sports / TacticalType of production: Industrial by Fox Cutlery
Country of production: Italy
Blade: N690 59 / 60HRC stainless steel
Blade finish: Black
Handle: FRN
Blade length: 55mm.
Blade thickness: 3mm.
Length closed: 85m.
Total length: 141mm.
Thick when closed: 18mm
Weight: 60g.
Closure: Liner Lock
Opening system: Carson Flipper system on ball bearings
Spacer and details: in anodized aluminum
Clip: steel, flush, removable and reversible
Packaging: Cardboard box with MKM logos Maniago Knife Makers
Notes: Design by Jesper VoxnaesMK-FX03-1PGO -
CRKT - Piet by Vox - 5390 - knife
Intended use: Sports
Type of production: Industrial
Country of production: China
Blade: 8Cr13Mov 58/60 HRC stainless steel
Blade treatment: Satin finish
Handle: Nylon reinforced with fiberglass with anodized titanium spacer
Blade length: 68mm.
Blade thickness: 3.3mm.
Length closed: 95mm.
Total length: 164mm.
Weight: 71g.
Closing: Liner Lock
Clip: stainless steel, removable and reversible
Packaging: cardboard box with CRKT logos
Notes: Design by Jesper VoxnaesC5390 -
MKM & Viper - Timavo Flipper by Vox - Green Micarta - VP02-GC - knife
A rippled surface, a wide loop, the crest of a wave: with its clear and harmoniously multifaceted design, Timavo suggests the multiple forms of flowing. - Knife made by Viper
Intended use: Sports
Type of production: Industrial
Country of production: Italy
Blade: M390 58 / 60HRC stainless steel
Blade treatment: Stonewashed
Handle: Stainless steel and Green Canvas Micarta
Blade length: 68mm.
Blade thickness: 3mm.
Total length: 183mm.
Weight: 110g.
Closing: Liner Lock
Clip: stainless steel, flush
Packaging: nylon pouch with zip and cardboard box with MKM Maniago Knife Makers logos
Notes: Carson Flipper opening system on ball bearings - Design by Jesper VoxnaesMK-VP02-GC -
MKM - Isonzo Cleaver knife black by Vox - MK-FX03-2PBK - knife
Small and compact, but with an impetuous personality, with its shots, with its curves and counter-curves, Isonzo is inspired by the magnificent river that breaks into the gates of the eastern Alps - Knife made by Fox
Intended use: Sports / Tactical
Type of production: Industrial
Country of production: Italy
Blade: stainless steel N690 59 / 60HRC
Blade treatment: Stonewash
Handle: FRN
Blade length: 55mm.
Blade thickness: 3mm.
Length closed: 85m.
Total length: 141mm.
Thick when closed: 18mm
Weight: 60g.
Closure: Liner Lock
Opening system: Carson Flipper system with ball bearing rotation mechanism
Spacer: in anodised aluminum
Clip: in steel
Sheath: -
Packaging: Cardboard box with MKM logos Maniago Knife Makers
Notes: Design by Jesper VoxnaesMK-FX03-2PBK -
MKM - Isonzo Hawkbill knife black by Vox - MK-FX03-1PBK - knife
Small and compact, but with an impetuous personality, with its shots, with its curves and counter-curves, Isonzo is inspired by the magnificent river that breaks into the gates of the eastern Alps - Knife made by Fox
Intended use: Sports / Tactical
Type of production: Industrial
Country of production: Italy
Blade: stainless steel N690 59 / 60HRC
Blade treatment: Black
Handle: FRN
Blade length: 55mm.
Blade thickness: 3mm.
Length closed: 85m.
Total length: 141mm.
Thick when closed: 18mm
Weight: 60g.
Closure: Liner Lock
Opening system: Carson Flipper system with ball bearing rotation mechanism
Spacer: in anodised aluminum
Clip: in steel
Sheath: -
Packaging: Cardboard box with MKM logos Maniago Knife Makers
Notes: Design by Jesper VoxnaesMK-FX03-1PBK -
MKM - Isonzo black clip point knife by Vox - MK-FX03-3PBK - knife
Small and compact, but with an impetuous personality, with its shots, with its curves and counter-curves, Isonzo is inspired by the magnificent river that breaks into the gates of the eastern Alps - Knife made by Fox
Intended use: Sports / Tactical
Type of production: Industrial
Country of production: Italy
Blade: stainless steel N690 59 / 60HRC
Blade treatment: Stonewash
Handle: FRN
Blade length: 55mm.
Blade thickness: 3mm.
Length closed: 85m.
Total length: 141mm.
Thick when closed: 18mm
Weight: 60g.
Closure: Liner Lock
Opening system: Carson Flipper system with ball bearing rotation mechanism
Spacer: in anodised aluminum
Clip: in steel
Sheath: -
Packaging: Cardboard box with MKM logos Maniago Knife Makers
Notes: Design by Jesper VoxnaesMK-FX03-3PBK -
MKM - Isonzo blue clip point knife by Vox - MK-FX03-3PBL - knife
Small and compact, but with an impetuous personality, with its shots, with its curves and counter-curves, Isonzo is inspired by the magnificent river that breaks into the gates of the eastern Alps - Knife made by Fox
Intended use: Sports / Tactical
Type of production: Industrial
Country of production: Italy
Blade: stainless steel N690 59 / 60HRC
Blade treatment: Stonewash
Handle: FRN
Blade length: 55mm.
Blade thickness: 3mm.
Length closed: 85m.
Total length: 141mm.
Thick when closed: 18mm
Weight: 60g.
Closure: Liner Lock
Opening system: Carson Flipper system with ball bearing rotation mechanism
Spacer: in anodised aluminum
Clip: in steel
Sheath: -
Packaging: Cardboard box with MKM logos Maniago Knife Makers
Notes: Design by Jesper VoxnaesMK-FX03-3PBL -
MKM - Clap by Bob Terzuola - titanium and G10 - MKLS01-GTBK - knife
Folding knife made by Lion Steel with BÖHLER M390 MICROCLEAN satin steel blade, opening with removable pinball and two-handed opening nail, rotation mechanism with ball bearings. Stainless steel liner lock, spacer and solid anodized titanium blue clip, stainless steel screws with anodized blue titanium rotating pin. Available in eight versions that differ in the materials used for the handle: carbon fiber, black G10, olive wood, Santos wood. For each of these materials, versions with or without titanium plates are available.
Intended use: Sports / EDC
Type of production: Industrial
Country of production: Maniago - Italy
Blade: stainless steel M390 60 / 61HRC
Blade treatment: satin
Grip: black G10 grips and titanium braces
Blade length: 76mm.
Blade thickness: 3.5mm.
Weight: 130g.
Opening: Carson Flipper system rotation mechanism with ball bearings
Washers: in steel and bronze, with ball bearings
Closure: Liner Lock
Clip: titanium, removable
Sheath: synthetic case with zip and strap
Packaging: cardboard box with MKM logos Maniago Knife Makers
Notes: Design by Bob Terzuola - Knife manufactured by Lion SteelMK-LS01-GTBK -
CRKT - Hi Jinx Z by Ken Onion - K281KXP - PRIVATE COLLECTION - Pocket Knife
KNIFE WITHDRAWN FROM A PRIVATE COLLECTION
* Provenance: withdrawn from a private collection, previously purchased.
* Condition: like new
* Commercially available: discontinued
* Sharpening: factory sharpened
* Marks on the blade: None
* Marks on the handle: None
* Box: Present
* Scabbard: /
* Manuals, certificates and warranties: Available
* Tested and certified by our in-house laboratory.Intended Use: Sporting
Production Type: Industrial
Country of manufacture: China
Blade: Stainless steel 1.4116
Blade finish: Satin surface
Handle: GFN nylon
Blade length: 84 mm.
Blade thickness: 2.3 mm.
Length closed: 120 mm.
Total length: 203 mm.
Weight: 139 g.
Closure: Liner Lock
Clip: Stainless steel, removable and reversible
Packaging: Cardboard box with CRKT logo
Notes: Ball bearing opening with IKBS system - Opening via Carson pinball system - Design by Ken OnionCK281KXP -
CRKT - Carson M16-12ZLEK Law Enforcement Zytel Folding Tanto - knife
Blade: Stainless steel AUS-8 high-carbon 57 / 58HRC Teflon
Handle: Zytel Grips
Blade length: 76 mm.
Blade thickness: 3 mm.
Overall length: 185 mm.
Weight: 102 g.
Lock: Liner Lock
Clip: Stainless Steel
Notes: equipped with safety locks and AutoLAWKS guard Carson Flipper tagliacinture with integrated rear window breakerCM16-12ZLEK -
CRKT - M16-04Z by Kit Carson - knife
Intended use: Sport
Type of production: Industrial
Production Blade: Taiwan
Blade: AUS-8 stainless steel
Treatment Lama: -
Handle: Zytel
Blade length: 94mm.
Blade thickness: 3.5mm.
Closed Length: 134mm.
Total length: 230mm.
Thick when closed: 17mm.
Balance: -
Weight: 182g.
Lock: Liner Lock locking system with self-LAWKS
Clip: Stainless Steel
Sheath: -
Packaging: cardboard box with logos CRKT
Notes: -CM16-04Z -
CRKT - Carson M16-14SFG - Special Forces Big Dog G10 knife
Intended use: Sports
Type of production: Industrial
Country of production: China
Blade: Stainless steel 8Cr14MoV to 58-60 HRC
Blade treatment: Ti-Ni
Handle: G-10
Blade length: 100mm.
Blade thickness: 3.5mm.
Length closed: 135mm.
Total length: 235mm.
Thick when closed: 17mm.
Balancing: -
Weight: 180g.
Closure: Liner Lock with auto-LAWKS locking system
Clip: stainless steel
Sheath: -
Packaging: cardboard box with CRKT logos
Note: -CM16-14SFG -
CRKT - Ripple Black Liner Lock by Ken Onion - K415KXP - Coltello
Destinazione d'uso: Sportivo / EDC
Tipo di produzione: Industriale
Paese di produzione: China
Lama: In acciaio inox 8Cr14MoV
Finitura lama: Satinatura
Manicatura: Alluminio Aeronautico
Lunghezza lama: 80mm.
Spessore lama: 2.5mm.
Lunghezza chiuso: 110mm.
Lunghezza totale: 185mm.
Spessore da chiuso: 8mm.
Peso: 66g.
Chiusura: Liner Lock
Clip: amovibile, in acciaio inox
Confezione: scatola in cartone con loghi CRKT
Note: Versione First Production Run - Sistema di apertura IKBS (Ikoma Korth Bearing System) su cuscinetti a sfera - Design by Ken Onion3803 -
CRKT - Carson knife M21-14SFG - Special Forces - knife
Intended use: Tactical/Military
Blade: AUS-8 56/58HRC stainless steel
Taiwan blade production
Handle: Aluminum
Blade length: 100mm.
Blade thickness: 3.5mm.
Closed length: 135mm.
Total length: 235mm.
Balancing: -
Weight: 155g.
Closure: Liner Lock
Clip: removable and reversible in stainless steel
Scabbard: -
Notes: design by Carson - AutoLAWKS safety catchM21-14SFG -
CRKT - IBI Flipper Karambit Kubotan by Vox - 7097 - knife
Intended Use: Tactical / Self Defense Tool / Sporting
Production type: Industrial
Country of Production: China
Blade: D2 steel
Blade Finish: Blackwash
Handle: G-10 with stainless steel liners and copper spacer/karambit ring
Blade length: 68mm.
Blade thickness: 2.9mm.
Length closed: 122mm.
Total length: 190mm.
Weight: 79g.
Closure: Liner Lock
Clip: Stainless steel, removable and reversible
Package: Cardboard box with CRKT logos
Notes: Design by Jesper Voxnaes - Carson Flipper opening system on IKBS ball bearings - Designed for personal defense, when closed it can be used as a karambit and as a kubotan.C7150 -
CRKT - CEO Flipper by Rogers - 7097 - knife
Intended Use: Sporting
Production type: Industrial
Country of Production: Taiwan
Blade: Stainless steel AUS-8 58/60 HRC
Blade Finish: Satin finish
Handle: FRN (Fiberglass Reinforced Nylon) with stainless steel liners
Blade length: 85mm.
Blade thickness: 2.3mm.
Length closed: 110mm.
Total length: 195mm.
Weight: 54g.
Closure: Liner Lock
Clip: Stainless steel, removable and reversible
Package: Cardboard box with CRKT logos
Notes: Design by Richard Rogers - Carson Flipper opening system on IKBS ball bearings - New 2021 version of the CEO 7096 model, winner of the Blade Show 2019 as "Best Buy Of The Year".C7097 -
CRKT - CEO by Rogers - 7096 - knife
Intended use: Sports
Type of production: Industrial
Country of production: China
Blade: 8Cr13Mov 58/60 HRC stainless steel
Blade treatment: Satin finish
Handle: Nylon reinforced with fiberglass
Blade length: 79mm.
Blade thickness: 2.2mm.
Length closed: 113mm.
Total length: 194mm.
Weight: 59g.
Closing: Liner Lock
Clip: stainless steel, removable and reversible
Packaging: cardboard box with CRKT logos
Notes: Design by Richard Rogers - IKBS ball bearing opening system - Winner of the 2019 Blade Show as "Best Buy Of The Year"C7096 -
MKM & Viper - Timavo Flipper by Vox - Black G10 - VP02-GBK - knife
A rippled surface, a wide loop, the crest of a wave: with its clear and harmoniously multifaceted design, Timavo suggests the multiple forms of flowing. - Knife made by Viper
Intended use: Sports
Type of production: Industrial
Country of production: Italy
Blade: M390 58 / 60HRC stainless steel
Blade treatment: Satin finish
Handle: Stainless steel and G10
Blade length: 68mm.
Blade thickness: 3mm.
Total length: 183mm.
Weight: 111g.
Closing: Liner Lock
Clip: stainless steel, flush
Packaging: nylon pouch with zip and cardboard box with MKM Maniago Knife Makers logos
Notes: Carson Flipper opening system on ball bearings - Design by Jesper VoxnaesMK-VP02-GBK -
MKM & Viper - Timavo Flipper by Vox - Blackwashed Titanium - VP02-TDSW - knife
A rippled surface, a wide loop, the crest of a wave: with its clear and harmoniously multifaceted design, Timavo suggests the multiple forms of flowing. - Knife made by Viper
Intended use: Sports
Type of production: Industrial
Country of production: Italy
Blade: M390 58 / 60HRC stainless steel
Blade treatment: Blackwash
Handle: Titanium Gr. 5 Ti6AI4V Blackwashed
Blade length: 68mm.
Blade thickness: 3mm.
Total length: 183mm.
Weight: 105g.
Closure: Liner Lock
Clip: titanium, machined from solid
Packaging: nylon pouch with zip and cardboard box with MKM Maniago Knife Makers logos
Notes: Carson Flipper opening system on ball bearings - Design by Jesper VoxnaesMK-VP02-TDSW -
CRKT - Journeyer Liner Lock by Liong Mah - 6530SWK - knife
Intended use: EDC
Type of production: Industrial
Country of production: China
Blade: 8Cr12MoV stainless steel
Blade treatment: Black Stone Washed
Handle: G10
Blade length: 70mm.
Blade thickness: 2.8mm.
Closed length: 98mm.
Total length: 165mm.
Weight: 82g.
Closure: Liner Lock
Clip: stainless steel, deep pocket type, removable and reversible
Packaging: cardboard box with CRKT logos
Notes: Design by Liong MahC6530SWK -
Berkel - folder knife in San Mai VG10 67 layers - gentleman knife 11 cm - kitchen knives
The artisans of Berkel have created an exclusive series of switchblade knives. The search for steel for the blade and fine materials for the handle, make these knives real collectibles. These unique pieces are numbered one by one by Berkel's cut masters.
- Blade material: Damaged steel San Mai 67 VG10 (60/61 HRC)
- Blade length: 11 cm long blade
- Total length: 25.5 cm
- Weight: 78 gr
- Sharpening: Smooth
- Handle: Composed of two wooden grips. Decorated with glossy black logo.
- Notes: no box, with vinyl case.B-F-SM -
MKM - Arvenis knife - G10 and aluminum - MKFX01-MG-GY - knife
Intended use: Sports / EDC
Type of production: Industrial
Country of production: Maniago - Italy
Blade: stainless steel M390 60 / 61HRC
Blade treatment: satin
Grip: black G10 grips
Blade length: 84mm.
Total length: 203mm.
Blade thickness: 4mm.
Weight: 130g.
Opening: Carson Flipper system rotation mechanism with ball bearings
Washers: in steel and bronze, with ball bearings
Closure: Liner Lock
Clip: titanium, removable
Sheath: synthetic case with zip and strap
Packaging: cardboard box with MKM logos Maniago Knife Makers
Notes: Knife manufactured by ViperFX01-MG-GY -
MKM - Clap by Bob Terzuola - olive wood - MK-LS01-O - knife
Folding knife made by Lion Steel with BÖHLER M390 MICROCLEAN satin steel blade, opening with removable pinball and two-handed opening nail, rotation mechanism with ball bearings. Stainless steel liner lock, spacer and solid anodized titanium blue clip, stainless steel screws with anodized blue titanium rotating pin. Available in eight versions that differ in the materials used for the handle: carbon fiber, black G10, olive wood, Santos wood. For each of these materials, versions with or without titanium plates are available.
Intended use: Sports / EDC
Type of production: Industrial
Country of production: Maniago - Italy
Blade: stainless steel M390 60 / 61HRC
Blade treatment: satin
Grip: olive wood grips
Blade length: 76mm.
Blade thickness: 3.5mm.
Weight: 115g.
Opening: Carson Flipper system rotation mechanism with ball bearings
Washers: in steel and bronze, with ball bearings
Closure: Liner Lock
Clip: titanium, removable
Sheath: synthetic case with zip and strap
Packaging: cardboard box with MKM logos Maniago Knife Makers
Notes: Design by Bob Terzuola - Knife manufactured by Lion SteelMK-LS01-O -
MKM - Clap by Bob Terzuola - titanium and Santos wood - MKLS01-ST - knife
Folding knife made by Lion Steel with BÖHLER M390 MICROCLEAN satin steel blade, opening with removable pinball and two-handed opening nail, rotation mechanism with ball bearings. Stainless steel liner lock, spacer and solid anodized titanium blue clip, stainless steel screws with anodized blue titanium rotating pin. Available in eight versions that differ in the materials used for the handle: carbon fiber, black G10, olive wood, Santos wood. For each of these materials, versions with or without titanium plates are available.
Intended use: Sports / EDC
Type of production: Industrial
Country of production: Maniago - Italy
Blade: stainless steel M390 60 / 61HRC
Blade treatment: satin
Handle: Santos wood grips and titanium plates
Blade length: 76mm.
Blade thickness: 3.5mm.
Weight: 130g.
Opening: Carson Flipper system rotation mechanism with ball bearings
Washers: in steel and bronze, with ball bearings
Closure: Liner Lock
Clip: titanium, removable
Sheath: synthetic case with zip and strap
Packaging: cardboard box with MKM logos Maniago Knife Makers
Notes: Design by Bob Terzuola - Knife manufactured by Lion SteelMK-LS01-ST -
MKM - Clap by Bob Terzuola - carbon fiber - MK-LS01-C - knife
Folding knife made by Lion Steel with BÖHLER M390 MICROCLEAN satin steel blade, opening with removable pinball and two-handed opening nail, rotation mechanism with ball bearings. Stainless steel liner lock, spacer and solid anodized titanium blue clip, stainless steel screws with anodized blue titanium rotating pin. Available in eight versions that differ in the materials used for the handle: carbon fiber, black G10, olive wood, Santos wood. For each of these materials, versions with or without titanium plates are available.
Intended use: Sports / EDC
Type of production: Industrial
Country of production: Maniago - Italy
Blade: stainless steel M390 60 / 61HRC
Blade treatment: satin
Grip: carbon fiber grips
Blade length: 76mm.
Blade thickness: 3.5mm.
Weight: 107g.
Opening: Carson Flipper system rotation mechanism with ball bearings
Washers: in steel and bronze, with ball bearings
Closure: Liner Lock
Clip: titanium, removable
Sheath: synthetic case with zip and strap
Packaging: cardboard box with MKM logos Maniago Knife Makers
Notes: Design by Bob Terzuola - Knife manufactured by Lion SteelMK-LS01-C -
CRKT - Homefront EDC by Ken Onion - K250KXP - knife
Intended use: Sports
Type of production: Industrial
Production Country: Taiwan
Blade: stainless steel 1.1416 55/57 HRC
Blade treatment: Stonewashed
Handle: FRN
Blade length: 90mm.
Blade thickness: 3.5mm.
Closed Length: 120mm.
Overall length: 210mm.
Weight: 122g.
Lock: Liner Lock
Clips: stainless steel
Packaging: cardboard box with CRKT logos
Notes: The knife can be easily disassembled and reassembled without the use of tools or screwdrivers - Design by Ken OnionCK250KXP -
CRKT - Ken Onion Wrinkle 2 - K200BXP - knife
Intended use: Sports / EDC
Type of production: Industrial
Production Country: Taiwan
Blade: Stainless steel AUS-8 to 57 / 59HRC
Blade treatment: Satin
Handle: Anodized aluminum with aged effect
Blade length: 65mm.
Blade thickness: 3mm.
Closed Length: 100mm.
Overall length: 165mm.
Weight: 96g.
Lock: Liner Lock
Clip: removable, stainless steel
Packaging: cardboard box with CRKT logos - Design by Ken Onion - opening system on IKBS type ball bearings with open type Carson FlipperCK200BXP -
CRKT - No Time Off by Flavio Ikoma - NoTimeOff - knife
Intended use: Sports
Type of production: Industrial
Production Lama: China
Blade: Stainless steel CTS BD-1 to 57 / 59HRC
Blade treatment: Satin
Handle: FRN with stainless steel liners
Blade length: 76mm.
Blade thickness: 4mm.
Length closed: 108mm.
Overall length: 184mm.
Thick when closed: -
Balancing: -
Weight: 167g.
Lock: Liner Lock with security system ILS Ikoma Lock Safety
Clips: stainless steel
Sheath: -
Packaging: cardboard box with logos CRKT, Design by Flavio Ikoma, opening system with ball bearing type IKBS opening type Carson FlipperC5350 -
CRKT - Plain Hammond Cruiser - 7904 - knife
Intended Use: Sport / Tactical
Type of production: Industrial
Blade Production: China
Blade: Stainless steel 8Cr14MoV 55 / 57HRC
Blade treatment: -
Handle: Zytel
Blade length: 95mm.
Blade thickness: 3.5mm.
Closed Length: 131mm.
Overall length: 225mm.
Thick when closed: -
Balancing: -
Weight: 173g.
Lock: Liner Lock with secure additional LAWKS
Clip: removable and reversible stainless steel
Sheath: -
Packaging: cardboard box with logos CRKTC7904 -
CRKT - Hammond Cruiser OD Green - 7904DKG - knife
Intended Use: Sport / Tactical
Type of production: Industrial
Production Lama: China
Blade: 8Cr14MoV stainless steel 55/57HRC
Treatment Lama: -
Handle: Zytel
Blade length: 95mm.
Blade thickness: 3.5mm.
Length closed: 131mm.
Total length: 225mm.
Thick when closed: -
Balance: -
Weight: 173g.
Lock: Liner Lock with secure additional LAWKS
Clip: removable and reversible stainless steel
Sheath: -
Packaging: cardboard box with logos CRKTC7904DKG -
CRKT - Carajas by Ikoma - 5340 - Knife
Intended Use: Sport / EDC
Type of production: Industrial
Production Lama: China
Blade: Sandvik 12C27 stainless steel 59/61 HRC
Treatment Blade: -
Handle: Black G-10
Blade length: 79mm.
Blade thickness: 2.5mm.
Closed Length: 109mm.
Overall length: 187mm.
Thickness when folded: 9mm.
Balancing: -
Weight: 85g.
Lock: Liner Lock
Clip: removable stainless steel
Sheath: -
Packaging: cardboard box with logos CRKT
Notes: Opening system IKBS (Ikoma Korth Bearing System) on ball bearings - Design by Flavio Ikoma10950 -
CRKT - Crawford Kasper Desert Combo - 6783D - knife
Intended Use: Sport / Tactical
Type of production: Industrial
Production Lama: China
Blade: Stainless steel 8Cr14MoV 55 / 57HRC
Treatment Lama: -
Handle: Zytel
Blade length: 95mm. Serration: 35mm.
Blade thickness: 3.5mm.
Closed Length: 135mm.
Overall length: 235mm.
Thick when closed: -
Balancing: -
Weight: 208g.
Lock: Liner Lock with secure additional LAWKS
Clip: Removable stainless steel
Sheath: -
Packaging: cardboard box with logos CRKT11046 -
CRKT - Crawford Kasper - 6773Z - knife
Intended Use: Sport / Tactical
Type of production: Industrial
Production Lama: China
Blade: 8Cr14MoV stainless steel 55/57HRC
Treatment Blade: -
Handle: Zytel
Blade length: 95mm.
Blade thickness: 3.5mm.
Closed Length: 135mm.
Overall length: 235mm.
Thick when closed: -
Balancing: -
Weight: 170g.
Lock: Liner Lock with secure additional LAWKS
Clip: removable stainless steel
Sheath: -
Packaging: cardboard box with logos CRKT10819 -
CRKT - Ryan Seven - 6803ZS - knife
Intended Use: Sport / Tactical
Type of production: Industrial
Production Lama: China
Blade: 8Cr14MoV stainless steel 55/57HRC
Treatment Lama: -
Handle: Zytel
Blade length: 89mm.
Blade thickness: 3.5mm.
Closed Length: 114mm.
Total length: 203mm.
Thick when closed: -
Balance: -
Weight: 161g.
Lock: Liner Lock with secure additional LAWKS
Clip: removable and reversible stainless steel
Sheath: -
Packaging: cardboard box with logos CRKTC6803ZS -
CRKT - Hammond Desert Cruiser - 7914DIN - knife
Intended Use: Sport / Tactical
Type of production: Industrial
Production Lama: China
Blade: 8Cr14MoV stainless steel 55/57HRC
Treatment Lama: -
Handle: Zytel
Blade length: 95mm.
Blade thickness: 3.5mm.
Length closed: 131mm.
Total length: 225mm.
Thick when closed: -
Balance: -
Weight: 173g.
Lock: Liner Lock with secure additional LAWKS
Clip: removable and reversible stainless steel
Sheath: -
Packaging: cardboard box with logos CRKTC7914DI -
CRKT - Drifter Razor-Sharp Edge G10 - 6450K - knife
What makes a good logo knife? It should be affordable, and it should have some large flat areas on the blade or frame suitable for logo imprinting. So we are very happy to present the Drifter series. They're high-quality knives that are priced low enough to purchase in quantity, and all have flat areas that are perfect for our "Company Billboard" imprinting by laser or silk screen. Or you can take any one to your local trophy house for personalized engraving.
The Drifter Stainless is a stainless steel frame-lock folder with a Razor-Sharp edge. The flat titanium nitride-coated frames are ideally suited for imprinting. It also features a 2.875" 8Cr14MoV stainless steel blade with a Razor-Sharp edge and a brushed finish. A stainless steel clip is included.Intended use: Sport
Type of production: Industrial
Production Lama: China
Blade: 8Cr14MoV stainless steel
Treatment Lama: -
Handle material: G10
Blade length: 70mm.
Blade thickness: 2.5mm.
Closed Length: 93mm.
Total length: 163mm.
Thick when closed: 14mm.
Balance: -
Weight: 66g.
Lock: Liner Lock
Clip: removable stainless steel
Sheath: -
Packaging: cardboard box with logos CRKTC6450K -
CRKT - Carson M16-14ZLEK Law Enforcement Zytel Folding Tanto - knife
The CRKT M16-14ZLEK Big Dog Law Enforcement knife is a Kit Carson design that is built for professional use. The black Zytel InterFrame handle has 420J2 stainless steel liners and CRKT's AutoLAWKS knife safety, which automatically actuates when the blade is open making it a virtual fixed blade. First responders will appreciate the integrated tungsten carbide window breaker and seat belt cutter. The pocket clip is 4-way reversible for every possible carry type, but not designed for tip-up in-pocket carry.
The Carson M16-14ZLEK features a black finished Tanto blade with a partially serrated cutting edge. The blade is easily opened with the dual thumb studs or a push of the Carson Flipper, which has an integrated seat belt cutter.
Specifications:
Overall Length: 9.25"
Blade Length: 3.75"
Blade Thickness: .14"
Blade Steel: AUS 8, HRC 55-57
Grind: Hollow
Handle Material: Zytel
Closed Length: 5.5"
Weight: 6.2 oz.
Made in TaiwanCM16-14ZLEK -
CRKT - Carson M16-13ZM Desert Camo - knife
CRKT M16-13 Desert Spear Point Folding Knife M16-13ZM has been developed specifically to blend into the desert environment. This CRKT knife features the super rigid InterFrame build with 420J2 stainless steel liners, threaded stainless steel back spacers, and Desert Camo pattern glass filled nylon scales. The spear point blade of the knife is non-reflective bead-blast finished AUS 4 stainless steel, crafted into a partially serrated combo edge that blends and almost disappears in the desert. The Columbia River M16-13 Desert Combo Edge Folder Knife is ideal when weight and bulk must be kept to a minimum, and it comes with a removable, single position clothing/gear clip for easier carrying. It also features Columbia River Knife & Tool's exclusive patented AutoLAWKS safety, which automatically turns the folder into a fixed blade when the blade is opened and locked. One-hand opening and closing is quick and smooth, the result of precision tolerances and lubrous washers at the blade pivot, and the dual ambidextrous thumb studs with checkered surfaces provide instant access in any circumstance. For a folding blade knife that's at home in the desert, choose the Columbia River Knife & Tool M16-13 Desert Camo Nylon Handle Folding Knife.
Knife Type: Folding Application: Tactical, utility Open Length: 8.25" Closed Length: 4.75" Weight: 3.5 oz Blade Length: 3.5" Blade Thickness: 0.1" Blade Material: AUS 4 stainless steel Blade Hardness: 55-57 HRC Blade Finish: Bead Blast Blade Grind: Hollow Blade Type: Spear point Blade Edge: Combo w/ triple-point serrations Handle Material: Glass-filled nylon Handle Finish: Desert Camo Liner Material: 420J2 Locking Mechanism: Locking liner Safety Mechanism: AutoLAWKS Pocket Clip: Yes, 1-position Additional Features: Carson Flipper M16-13ZM -
CRKT - Carson M21-12G TiNi G10 - knife
Intended Use: Tactical / Sports
Type of production: Industrial
Production Lama: China
Blade: stainless steel 8Cr14, 58-59 HRC
Treatment Blade: Titanium Nitride
Handle material: G10
Blade length: 76mm.
Blade thickness: 3mm.
Closed Length: 108mm.
Total length: 184mm.
Weight: 108g.
Lock: Liner Lock with Auto-closure LAWKS
Clip: removable and reversible stainless steel
Sheath: -
Packaging: cardboard box with logos CRKT
Notes: design by Kit CarsonM21-02GL -
CRKT - Carson M16-13 ZLEK - knife
Blade: AUS-8 stainless steel high-carbon Teflon 57/58HRC
Handle: Handle: Zytel
Blade length: 84 mm.
Blade Thickness: 2.5 mm.
Total length: 200 mm.
Weight: 110 g.
Lock: Liner Lock
Clip: Stainless Steel
Notes: Equipped with safety lock and guard LAWKS "Carson Flipper" - glass breakingCM16-13ZLEK -
CRKT - Carson M21-12G TiNi G10 - knife
Intended Use: Tactical / Sports
Type of production: Industrial
Production Lama: China
Blade: stainless steel 8Cr14, 58-59 HRC
Treatment Blade: Titanium Nitride
Handle material: G10
Blade length: 76mm.
Blade thickness: 3mm.
Closed Length: 108mm.
Total length: 184mm.
Weight: 108g.
Lock: Liner Lock with Auto-closure LAWKS
Clip: removable and reversible stainless steel
Sheath: -
Packaging: cardboard box with logos CRKT
Notes: design by Kit CarsonCM21-12G -
CRKT - Carson M21-14SF - Special Forces - coltello
Destinazione d'uso: Tattico/Militare
Lama: in acciaio inox AUS-8 56/58HRC
Produzione Lama Taiwan
Manicatura: Alluminio
Lunghezza lama: 100mm.
Spessore della lama: 3.5mm.
Lunghezza chiuso: 135mm.
Lunghezza totale: 235mm.
Bilanciatura: -
Peso: 155g.
Chiusura: Liner Lock
Clip: amovibile e reversibile in acciaio inox
Fodero: -
Note: design by Carson - Fermo di sicurezza AutoLAWKS3092 -
CRKT - Folding Hissatsu 2903Q - coltello
Destinazione d'uso: Sportivo
Tipo di produzione: Industriale
Produzione Lama: Taiwan
Lama: in acciaio inox AUS-8 56/58HRC
Trattamento Lama: black
Manicatura: Liners in alluminio
Lunghezza lama: 95mm.
Spessore lama: 3mm.
Lunghezza chiuso: 125mm.
Lunghezza totale: 230mm.
Spessore da chiuso: 18mm.
Peso: 174g.
Chiusura: Liner lock con sicura Auto-LAWKS
Clip: in acciaio inox
Confezione: di cartone marrone con loghi CRKT
Note:3140 -
CRKT - Ichi by Koji Hara - 1070 - coltello
Destinazione d'uso: Sportivo
Lama: in acciaio inox 420J2 54/56HRC
Produzione Lama Taiwan
Manicatura: Kraton e Zytel
Lunghezza lama: 65mm.
Spessore della lama: 2mm.
Lunghezza chiuso: 83mm.
Lunghezza totale: 142mm.
Bilanciatura: -
Peso: 54g.
Chiusura: Liner Lock
Clip: amovibile, in acciaio inox
Fodero: -
Note: Apertura servoassistita OutBurst - Design by Koji Hara3089 -
CRKT - Montana Gentleman by Gallagher - 7402SK - coltello
Crkt - Montana Gentleman Grey 7402SK
Da oggi anche voi potrete possedere uno speciale coltello pieghevole di Barry Gallagher, noto e premiato knifemaker per i suoi coltelli costruiti con materiali esotici. Il Montana Gentleman è ispirato ad un suo precedente custom: Damascus Hummingbird già visto sulla rivista Blade.
La struttura InterFrame e il liner lock sono costruiti in acciaio 420J2, mentre la lama è in AUS 8 con un perno di apertura riempito di Kraton.
Acciaio: Aus 8 - 58 HRC
Lunghezza della lama: 65 mm.
Spessore della lama: 2.5 mm.
Lunghezza aperto: 160 mm.
Lunghezza chiuso: 90 mm.
Peso: 72 g.3061 -
CRKT - Wasp by Howard Viele - 8002 - coltello
Coltello da collezione ormai fuori produzione
Destinazione d'uso: Collezione/Sportivo
Lama: in acciaio inox AUS-118
Manicatura: Titanio e Kraton
Lunghezza lama: 77mm.
Spessore della lama: 2.5mm.
Lunghezza chiuso: 110mm.
Lunghezza totale: 185mm.
Bilanciatura: -
Peso: 80g.
Chiusura: Liner Lock
Clip: amovibile in acciaio inox
Fodero: -
Note: Design by Howard Viele0917 -
CRKT - Wild Weasel by Crawford - 1000A - coltello
Destinazione d'uso: Collezione/Sportivo
Lama: in acciaio inox 154CM 58/60HRC made in USA
Manicatura: Alluminio 6061 con liners in acciaio inox 410 ed inserti in Santoprene
Lunghezza lama: 85mm.
Spessore della lama: 2.5mm.
Lunghezza chiuso: 112mm.
Lunghezza totale: 194mm.
Bilanciatura: -
Peso: 114g.
Chiusura: Liner Lock
Clip: Reversibile ed amovibile in acciaio Inox
Fodero: -
Note: Design by Pat & Wes Crawford - Meccanismo di apertura servoassistito Tailwind3081 -
LoneWolf - Black Talon - coltello
Destinazione d'uso: Tattico
Tipo di produzione: industriale
Lama: in acciaio inox CPM-S30V
Trattamento Lama: -
Produzione Lama: USA
Manicatura: nylon
Lunghezza lama: 83mm.
Spessore della lama: 3mm.
Lunghezza chiuso: 80mm
Lunghezza totale: 190mm.
Bilanciatura: -
Peso: 108g.
Chiusura: Liner Lock
Clip: Acciaio Inox
Fodero: -2790 -
LoneWolf - Dark Raven Combo - knife
Intended Use: Tactical
Type of production: industrial
Blade: stainless steel CPM-S30V
Treatment Lama: -
Production Lama USA
Handle material: G10
Blade length: 75mm.
Blade Thickness: 3mm.
Closed Length: 75mm
Total length: 175mm.
Balance: -
Weight: 110g.
Lock: Liner Lock
Clip: Stainless Steel
Sheath: -2791 -
LoneWolf - Loveless Clip Point Folder - knife
LoneWolf - Loveless Clip Point Folder - knife
Intended use: Sport
Type of production: Industrial
Production Blade: Italy
Blade: 154CM stainless steel
Treatment Blade: -
Handle: Micarta
Blade length: 75mm.
Blade thickness: 3mm.
Length closed: -
Overall length: 190mm.
Thick when closed: -
Balancing: -
Weight: 128g.
Lock: Liner Lock
Clip: -
Sheath: Leather
Packaging: cardboard box with logos Lonewolf
Notes: Design by Loveless1309