Knives, collection knife, tactical knives, outdoor knives, pocket knives and tools

The internationally awarded forge of Laguiole en Aubrac is a benchmark for traditional French craftsmanship.

This knife is dedicated to Camembert and is sold in the round wooden box typical of this famous cheese known throughout the world.

Intended use: Regional/Collection

Type of production: artisanal
Blade: Stainless steel 12C27
Country of production: France
Handle: Pistachio wood
Blade length: 80mm.
Blade thickness: 2.6mm.
Length closed: 110mm.
Total length: 193mm.
Weight: 88g.
Closure: Rear retention spring
Clip: -
Sheath: -
Notes: wooden box

These high quality knives, are handcrafted in the tradition of French Thiers cutlery.

This large, perfectly balanced Laguiole hunting knife was made entirely by hand in Laguiole, by a master blacksmith, according to the strict LOG (Laguiole Origine Garantie) quality criteria. Depending on the version, it requires from 109 to 216 working steps.

The blade has a very balanced geometry proven over many decades: it is 11 cm long, 3 cm high and 4 mm thick. Both the bee and the area above the ricasso can be used as a thumb rest.

The blade is ground on both sides to about 22 degrees to the cutting edge (flat grind), so that optimal breaking and scoring is guaranteed and, at the same time, the edge does not round off too quickly. 

The handle scales are polished to a high shine with seven different oils and high quality wax pastes on large felt discs. 

The left handle bears the traditional shepherd's cross (French: croix du berger) as decoration.

Intended Use: Regional/Collection/Outdoor/Hunting

Type of production: handcrafted
Blade: Swedish 12C27 stainless steel at 54HRC satin finish.
Blade Production: France
Handle: Ebony
Blade length: 110mm.
Blade thickness: 4mm.
Length closed: 138mm.
Total length: 240mm.
Balance: -
Weight: 180g.
Closure: rear retention spring
Clip: -
Scabbard: -
Notes: -

Intended Use: Tactical / Collection

Production type: Industrial
Country of Production: Taiwan
Blade: D2 steel
Blade Treatment: Stonewashed
Handle: Aluminum 6061-T6
Blade Length: 57mm.
Blade thickness: 3.7mm.
Length closed: 115mm.
Total length: 168mm.
Weight: 124g.
Closure: Side Lever (modified back lock)
Clip: Stainless steel, retractable
Package: Cardboard box with CRKT logos
Notes: Design by Joe Caswell

Intended Use: Sporting

Production type: Industrial
Country of Production: Taiwan
Blade: Stainless steel AUS-8 58/60 HRC
Blade Finish: Satin finish
Handle: FRN (Fiberglass Reinforced Nylon) with stainless steel liners
Blade length: 85mm.
Blade thickness: 2.3mm.
Length closed: 110mm.
Total length: 195mm.
Weight: 54g.
Closure: Liner Lock
Clip: Stainless steel, removable and reversible
Package: Cardboard box with CRKT logos
Notes: Design by Richard Rogers - Carson Flipper opening system on IKBS ball bearings - New 2021 version of the CEO 7096 model, winner of the Blade Show 2019 as "Best Buy Of The Year".

Intended use: Tactical / Military

Type of production: Industrial
Country of production: China
Blade: full tang in SK-5 carbon steel
Blade treatment: powder coated
Handle: G10
Blade length: 117mm.
Blade thickness: 4mm.
Total length: 238mm.
Weight: 130g.
Sheath: FRN with belt or neck loop
Packaging: cardboard box with CRKT logos
Notes: Design by Kit Carson

Intended use: Pocket knife

Type of production: industrial
Blade: 19C27 stainless steel
Blade treatment: -
Handle: snakewood
Blade length: 60mm.
Blade thickness: 2.5mm.
Length closed: 95mm.
Total length: 160mm.
Balancing: -
Weight: 65g.
Closing: -
Clip: -
Notes: aluminum box

Intended use: Tactical / Sports

Type of production: Industrial
Country of production: China
Blade: 8Cr13Mov 58/60 HRC stainless steel
Blade treatment: Black Oxide
Handle: 2CR13 stainless steel
Blade length: 75mm.
Length closed: 102mm.
Total length: 180mm.
Weight: 82g.
Closure: Frame Lock
Clip: stainless steel, removable and reversible
Packaging: cardboard box with CRKT logos
Notes: Design by Kit Carson

Intended use: Sports

Type of production: Industrial
Country of production: China
Blade: 8Cr13Mov 58/60 HRC stainless steel
Blade treatment: Satin finish
Handle: Nylon reinforced with fiberglass
Blade length: 79mm.
Blade thickness: 2.2mm.
Length closed: 113mm.
Total length: 194mm.
Weight: 59g.
Closing: Liner Lock
Clip: stainless steel, removable and reversible
Packaging: cardboard box with CRKT logos
Notes: Design by Richard Rogers - IKBS ball bearing opening system - Winner of the 2019 Blade Show as "Best Buy Of The Year"

Knife made by hand according to the tradition of the French cutlery of Thiers that ensures the absence of manufacturing defects under normal use.

Blade: 12C27 Swedish steel with 54HRC satin finish.
Handle: in olive wood
Blade length: 105 mm.
Blade thickness: 4 mm.
Total length: 240 mm.
Weight: 160 g.
Closure: spring
Sheath: -
Note:

Intended use: EDC

Type of production: Industrial
Country of production: China
Blade: 8Cr12MoV stainless steel
Blade treatment: Black Stone Washed
Handle: G10
Blade length: 70mm.
Blade thickness: 2.8mm.
Closed length: 98mm.
Total length: 165mm.
Weight: 82g.
Closure: Liner Lock
Clip: stainless steel, deep pocket type, removable and reversible
Packaging: cardboard box with CRKT logos
Notes: Design by Liong Mah

Intended use: Sports / Tactical

Type of production: Industrial
Lama production: China
Blade: 8Cr14MoV stainless steel
Blade Treatment: Black Stone Washed
Handle: G10
Blade length: 88mm.
Blade thickness: 3mm.
Length closed: 113mm.
Total length: 202mm.
Weight: 116g.
Closure: Liner Lock
Clip: stainless steel, deep pocket type, removable and reversible
Packaging: cardboard box with CRKT logos
Notes: "Outburtst" rapid opening system

Traditional Japanese carving knife "Kogatana" used in gardening, as a knife from the innseto or even for a walk and with a sharp blade only on one side. Thanks to the wooden case (shirasaya), similar to that used for the katana or for the time being, the blade remains perfectly protected and easily transportable.

Intended use: Sports / Collection

Blade: SK5 carbon steel
Lama Japan production
Handle: cherry wood
Blade length: 70mm.
Blade thickness: 2.5mm.
Total length: 165mm.
Balancing: -
Weight: 44g.
Sheath: cherry wood sheath
Note:

The "Fidelis" was born from the desire to pay homage to the "medieval Larzac", with its old Templar villages and legends.
It is a knife that symbolizes the roughness of this land, the rusticity of its vegetation and its climate, but also the nobility of women and men who have worked, modeled, guarded and inserted into this object a soul.
Made in Millau, in the heart of Aveyron, in the cutlery workshops "L'ame du Causse", it is worked with noble materials, such as the precious wood of ebony that the Knights Templars have brought back to their return. Its "sage leaf" blade, made of 12C27 steel, renowned for its cutting quality and ease of maintenance, will be a guarantee of longevity. The "Fidelis" will be your ideal companion to share moments of everyday life full of history.

Intended use: Regional

Type of production: Industrial
Country of production: France
Blade: 12C27 stainless steel
Blade treatment: Satin
Handle: Ebony wood
Blade length: 85mm.
Blade thickness: 2.5mm.
Length closed: 110mm.
Total length: 195mm.
Weight: 54g.
Opening: manual, two-handed
Closure: upper safety ring
Packaging: cardboard case
Note: -

Knife made by hand according to the tradition of the French cutlery of Thiers that ensures the absence of manufacturing defects under normal use.

Blade: 12C27 Swedish steel with 54HRC satin finish.
Handle: in olive wood
Blade length: 105 mm.
Blade thickness: 4 mm.
Total length: 240 mm.
Weight: 160 g.
Closure: spring
Sheath: -
Note:

Use: Tactical / Sports

Type of production: Industrial
Country of production: China
Blade: Stainless steel 8Cr13Mov 58/60 HRC
Blade Treatment: Black Oxide
Handle: Stainless steel 2CR13
Blade length: 79mm.
Blade thickness: 2.4mm.
Closed Length: 102mm.
Overall length: 182mm.
Weight: 79g.
Closure: Framelock
Clip: stainless steel, removable and reversible
Packaging: cardboard box with logos CRKT
Notes: Design by Kit Carson

Intended use: Sports

Type of production: Industrial
Production Country: China
Blade: Stainless steel 8Cr13Mov 58/60 HRC
Blade treatment: Satin finish
Handle: Stainless Steel
Blade length: 91mm.
Blade thickness: 4mm.
Closed Length: 119mm.
Overall length: 205mm.
Weight: 194g.
Lock: Frame Lock
Clips: stainless steel, removable and reversible
Packaging: cardboard box with CRKT logos
Notes: Design by Vox

Intended use: Sports

Type of production: Industrial
Production Lama: China
Blade: Stainless steel CTS BD-1 to 57 / 59HRC
Blade treatment: Satin
Handle: FRN with stainless steel liners
Blade length: 76mm.
Blade thickness: 4mm.
Length closed: 108mm.
Overall length: 184mm.
Thick when closed: -
Balancing: -
Weight: 167g.
Lock: Liner Lock with security system ILS Ikoma Lock Safety
Clips: stainless steel
Sheath: -
Packaging: cardboard box with logos CRKT, Design by Flavio Ikoma, opening system with ball bearing type IKBS opening type Carson Flipper

Intended use: Sports

Type of production: Industrial
Production Lama: China
Blade: Stainless steel CTS BD-1 to 57 / 59HRC
Blade treatment: Satin
Handle: FRN with stainless steel liners
Blade length: 76mm.
Blade thickness: 4mm.
Length closed: 108mm.
Overall length: 184mm.
Thick when closed: -
Balancing: -
Weight: 167g.
Lock: Liner Lock with security system ILS Ikoma Lock Safety
Clips: stainless steel
Sheath: -
Packaging: cardboard box with logos CRKT, Design by Flavio Ikoma, opening system with ball bearing type IKBS opening type Carson Flipper

Intended Use: Sports

Type of production: Industrial
Production Lama: China
Blade: Stainless steel 7Cr14MoV
Treatment Lama: Black Stone Washed
Handle: G10
Blade length: 55mm.
Blade thickness: 2.3mm.
Closed Length: 74mm.
Overall length: 130mm.
Thick when closed: 13mm.
Balancing: -
Weight: 40g.
Closure: Frame Lock
Clip: removable, stainless steel
Sheath: -
Packaging: cardboard box with logos CRKT

Intended use: Sport

Type of production: Industrial
Production Lama: China
Blade: 8Cr14MoV stainless steel
Treatment Blade: -
Handle: Stainless steel 2Cr13
Blade length: 82mm.
Blade thickness: 2.5mm.
Closed Length: 105mm.
Overall length: 182mm.
Thick when closed: 14mm.
Balancing: -
Weight: 126g.
Lock: Frame Lock Stainless Steel 2Cr13
Clip: removable stainless steel
Sheath: -
Packaging: cardboard box with logos CRKT

Intended Use: Sport / EDC

Type of production: Industrial
Production Blade: Taiwan
Blade: 8Cr14MoV stainless steel - 58/59HRC
Treatment Blade: -
Handle: Black G-10
Blade length: 70mm.
Blade thickness: 4mm.
Closed Length: 95mm.
Overall length: 165mm.
Thickness when folded: 9mm.
Balancing: -
Weight: 99g.
Clasp: simple spring security
Clip: removable stainless steel
Sheath: -
Packaging: cardboard box with logos CRKT
Notes: Design by Liong Mah

Intended Use: Sport / EDC

Type of production: Industrial
Production Lama: China
Blade: Sandvik 12C27 stainless steel 59/61 HRC
Treatment Blade: -
Handle: Black G-10
Blade length: 79mm.
Blade thickness: 2.5mm.
Closed Length: 109mm.
Overall length: 187mm.
Thickness when folded: 9mm.
Balancing: -
Weight: 85g.
Lock: Liner Lock
Clip: removable stainless steel
Sheath: -
Packaging: cardboard box with logos CRKT
Notes: Opening system IKBS (Ikoma Korth Bearing System) on ball bearings - Design by Flavio Ikoma

Destinazione d'uso: Escursionismo/Heavy Duty

Tipo di Produzione: industriale
Lama: in acciaio al carbonio 65Mn a 54/56 HRC con trattamento Black Powder
Produzione Lama Cina
Manicatura: Polimeri TPR e Nylon
Lunghezza lama: 355mm.
Spessore della lama: 2.5mm.
Lunghezza totale: 492mm.
Bilanciatura: avanzata
Peso: 575g.
Chiusura: -
Clip: -
Fodero: in Nylon
Confezione: scatola di cartone con loghi CRKT
Note: Design by Ken Onion

Laguiole En Aubrac - Double Spring - Juniper

Intended use: Sport

Type of production: Industrial
Production Blade: France
Blade: Stainless steel 12C27
Treatment Blade: satin
Handle: Wood Juniper
Blade length: 98mm.
Blade thickness: 2.5mm.
Length closed: 119mm.
Total length: 217mm.
Thick when closed: 20mm.
Balance: -
Weight: 102g.
Closure: A double spring
Clip: -
Sheath: -
package:
Notes:

What makes a good logo knife? It should be affordable, and it should have some large flat areas on the blade or frame suitable for logo imprinting. So we are very happy to present the Drifter series. They're high-quality knives that are priced low enough to purchase in quantity, and all have flat areas that are perfect for our "Company Billboard" imprinting by laser or silk screen. Or you can take any one to your local trophy house for personalized engraving. 

The Drifter Stainless is a stainless steel frame-lock folder with a Razor-Sharp edge. The flat titanium nitride-coated frames are ideally suited for imprinting. It also features a 2.875" 8Cr14MoV stainless steel blade with a Razor-Sharp edge and a brushed finish. A stainless steel clip is included.

Intended use: Sport

Type of production: Industrial
Production Lama: China
Blade: 8Cr14MoV stainless steel
Treatment Lama: -
Handle material: G10
Blade length: 70mm.
Blade thickness: 2.5mm.
Closed Length: 93mm.
Total length: 163mm.
Thick when closed: 14mm.
Balance: -
Weight: 66g.
Lock: Liner Lock
Clip: removable stainless steel
Sheath: -
Packaging: cardboard box with logos CRKT

Blade: 8Cr13MoV stainless steel - Teflon 57/58HRC
Handle material: stainless steel 2CR13
Blade length: 7.5 mm.
Blade Thickness: 2.5 mm.
Total length: 180 mm.
Weight: 78 g.
Closure: Frame Lock
Clip: Stainless Steel
Notes: -

CRKT M16-13 Desert Spear Point Folding Knife M16-13ZM has been developed specifically to blend into the desert environment. This CRKT knife features the super rigid InterFrame build with 420J2 stainless steel liners, threaded stainless steel back spacers, and Desert Camo pattern glass filled nylon scales. The spear point blade of the knife is non-reflective bead-blast finished AUS 4 stainless steel, crafted into a partially serrated combo edge that blends and almost disappears in the desert. The Columbia River M16-13 Desert Combo Edge Folder Knife is ideal when weight and bulk must be kept to a minimum, and it comes with a removable, single position clothing/gear clip for easier carrying. It also features Columbia River Knife & Tool's exclusive patented AutoLAWKS safety, which automatically turns the folder into a fixed blade when the blade is opened and locked. One-hand opening and closing is quick and smooth, the result of precision tolerances and lubrous washers at the blade pivot, and the dual ambidextrous thumb studs with checkered surfaces provide instant access in any circumstance. For a folding blade knife that's at home in the desert, choose the Columbia River Knife & Tool M16-13 Desert Camo Nylon Handle Folding Knife.

Blade: AUS-8 stainless steel high-carbon Teflon 57/58HRC
Handle: Handle: Zytel
Blade length: 84 mm.
Blade Thickness: 2.5 mm.
Total length: 200 mm.
Weight: 110 g.
Lock: Liner Lock
Clip: Stainless Steel
Notes: Equipped with safety lock and guard LAWKS "Carson Flipper" - glass breaking

Intended Use: Sporting / EDC

Production Type: Industrial
Blade Production: Taiwan
Blade: Stainless steel Acute+ 59/60HRC
Handle: Stainless steel with titanium nitriding
Blade Length: 80mm.
Blade thickness: 2.5mm.
Length closed: 110mm.
Total length: 185mm.
Thickness when closed: 9mm.
Weight: 82g.
Closure: Frame Lock
Clip: removable, stainless steel
Packaging: cardboard box with CRKT logos
Notes: IKBS (Ikoma Korth Bearing System) opening system on ball bearings - Design by Ken Onion

LoneWolf - Loveless City - Micarta knife

Intended use: Pocket Knife

Type of production: industrial
Blade: stainless steel 19c27
Treatment Blade: -
Handle: micarta loveless
Blade length: 60mm.
Blade Thickness: 2.5mm.
Closed Length: 95mm.
Overall length: 160mm.
Balancing: -
Weight: 65g.
Closure: -
Clip: -
Notes: aluminum box