Knives, collection knife, tactical knives, outdoor knives, pocket knives and tools

Collini Cutlery is the official distributor for Italy of MCUSTA Japanese knives

Intended use: sports / collection

Type of production: industrial cutting - handcrafted assembly and finishing
Blade: SPG2 61 / 62HRC
Blade treatment: -
Production Lama: Japan
Handle: Damascus steel and pakka wood
Blade length: 70mm.
Blade thickness: 3mm.
Closed length: 96mm.
Total length: 166mm.
Balancing: -
Weight: 96g.
Closure: Liner Lock
Clip: -
Sheath: cordura
Note: -

Collini Cutlery is the official distributor of MCUSTA Japanese knives for Italy

Intended use: sports / collection

Type of production: industrial cutting - craft assembly and finishing
Production Lama: Japan
Blade: VG-10 stainless steel at 59 / 60HRC
Handle: Micarta
Blade length: 95mm.
Blade thickness: 3mm.
Length closed: 115mm.
Total length: 207mm.
Thick when closed: 17.5mm.
Weight: 100g.
Closure: Liner Lock
Clip: in stainless steel
Packaging: cardboard box with Mcusta logos
Note: -

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Like new
* Commercially available Yes, but only in stonewashed "Thunderstorm" finish.
* Sharpening: Factory
* Marks on blade: No
* Marks on handle: No
* Box: Present and original
* Scabbard: not provided
* Manuals, Certificates and Warranties: present.
* Checked and Certified by our in-house laboratory




Intended Use: Sporting

Type of production: industrial
Blade: stainless steel 154CM
Blade finish: dual tone (satin and stone washed)
Country of manufacture: USA
Handle: G10 and titanium liners
Blade length: 76mm.
Blade thickness: 3.2mm.
Length closed: 104mm.
Total length: 183mm.
Weight: 114g.
Closure: Liner Lock
Clip: removable, stainless steel
Notes: Collected specimen from private collection, absolutely like new

Extremely limited edition Platinum Label series folding knife with Mokume damascus blade and heads produced in only 20 examples each with a different coloration of the wood briar. Each specimen is therefore unique and differs from the previous one.

Intended use: collection

Type of production: industrial cutting - craftsmanship, assembly and finishing
Country of production: Seki - Japan
Blade: made of Mokume stainless steel with VG-10 cutting edge, forged with rainbow damascus rolling, achieved through layers of stainless steel, copper and brass and hammered through Tsuchime technique
Handle: made of Mokume stainless damask steel and wood briar
Blade length: 80mm.
Blade thickness: 3mm.
Length closed: 110mm.
Total length: 195mm.
Thickness when closed: 14mm.
Weight: 208g.
Closure: Liner Lock
Clip: handcrafted, removable and reversible, hammered stainless steel
Packaging: wooden box with Mcusta logos
Notes: Special and Limited Edition made in only 20 pieces for the Blade Show in Atlanta 2022

Knife withdrawn from a private collection in excellent condition, uniquely has a small imperfection on the wood at the base of the handle (visible in the close up of the photos) - Complete with original box - Checked and certified by our in-house Coltelleria Collini laboratory.

The SHINRA MAXIMA series uses the sintered and cryogenically hardened Japanese steel SPG2 in 3-layer laminate, one of the best ever produced in Japan

Intended use: sports / collection

Type of production: industrial cutting - handcrafted assembly and finishing
Production Lama: Japan
Blade: 61 / 62HRC SPG-2 stainless steel in three-layer San Mai laminate
Handle: Pakka Wood
Blade length: 95mm.
Blade thickness: 3mm.
Closed length: 115mm.
Total length: 207mm.
Thick when closed: 17.5mm.
Weight: 100g.
Closure: Liner Lock
Clip: in stainless steel
Packaging: cardboard box with Mcusta logos
Note: -

For more information on the steel used, you can visit the website: www.collinisteel.com

Coltelleria Collini is the official distributor for Italy of MCUSTA Japanese knives

Intended use: sports / collection

Type of production: industrial cutting - handcrafted assembly and finishing
Blade: SanMai steel with VG-10 stainless steel edge at 59 / 60HRC and external cheeks in 33-layer nickel damascus
Production Lama: Japan
Handle: Micarta
Blade length: 45mm.
Blade thickness: 3mm.
Closed length: 70mm.
Total length: 118mm.
Balancing: -
Weight: 44g.
Closure: Liner Lock
Clip: in deep pocket steel
Sheath:
Note: -

Coltelleria Collini is the official distributor for Italy of MCUSTA Japanese knives

Intended use: sports / collection

Type of production: industrial cutting - handcrafted assembly and finishing
Blade: SanMai steel with VG-10 stainless steel edge at 59 / 60HRC and external cheeks in 33-layer nickel damascus
Production Lama: Japan
Handle: Micarta
Blade length: 45mm.
Blade thickness: 3mm.
Closed length: 70mm.
Total length: 118mm.
Balancing: -
Weight: 44g.
Closure: Liner Lock
Clip: in deep pocket steel
Sheath:
Note: -

Extremely limited edition Yatagarasu MCUSTA folding knife of the Shinwa series, with Mokume blade and produced in only 100 pieces.

Yatagarasu, in Japanese culture, is a three-legged crow symbol of driving owned by the Sun goddess Amaterasu. Yatagarasu appears in ancient Japanese documents, such as Kojiki (古 事 記), in which it is also said that he fought and killed a beast intending to devour the Sun, and that he is also the protector of the emperor Jimmu.
On many occasions, in Japanese art this creature is represented with three legs, although in Kojiki it is never said that the Yatagarasu has more than two. Today, the three-legged version of the Yatagarasu is used as a symbol of the football federation of Japan.

Intended use: collection

Type of production: industrial cutting - craftsmanship, assembly and finishes
Lama production: Japan
Blade: stainless steel Mokume Damascus - Aogami (blue steel) forged with lamination of rainbow Damascus, obtained thanks to layers of stainless steel, copper and brass and with black hammering through the Tsuchime technique
Handle: in stainless damask with dark purple corian insert and copper and gold inlays
Blade length: 80mm.
Blade thickness: 3mm.
Length closed: 110mm.
Total length: 195mm.
Thick when closed: 14mm.
Weight: 141g.
Closure: Liner Lock
Clip: -
Packaging: wooden box with Mcusta logos
Notes: limited edition 100 pieces

For more information on the steel used you can view the site: www.collinisteel.com

Collini Cutlery is the official distributor for Italy of the Japanese MCUSTA knives

The SHINRA MAXIMA series uses Japanese sintered and cryogenically hardened SPG2 in 3-layer laminate, one of the best ever produced in Japan

Intended use: sports / collection

Type of production: industrial cut - assembly and handmade finishes
Lama production: Japan
Blade: 61 / 62HRC SPG-2 stainless steel in three-layer San Mai laminate
Handle: Damascus
Blade length: 90mm.
Blade thickness: 3mm.
Length closed: 117mm.
Total length: 211mm.
Thick when closed: 17.5mm.
Weight: 170g.
Closure: Liner Lock
Clip: stainless steel
Packaging: cardboard box with Mcusta logos
Note: -

For more information on the steel used you can view the site: www.collinisteel.com

Collini Cutlery is the official distributor for Italy of the Japanese MCUSTA knives

The SHINRA MAXIMA series uses Japanese sintered and cryogenically hardened SPG2 in 3-layer laminate, one of the best ever produced in Japan

Intended use: sports / collection

Type of production: industrial cut - assembly and handmade finishes
Lama production: Japan
Blade: 61 / 62HRC SPG-2 stainless steel in three-layer San Mai laminate
Handle: Pakka wood
Blade length: 95mm.
Blade thickness: 3mm.
Length closed: 115mm.
Total length: 207mm.
Thick when closed: 17.5mm.
Weight: 100g
Closure: Liner Lock
Clip: stainless steel
Packaging: cardboard box with Mcusta logos
Note: -

For more information on the steel used you can view the site: www.collinisteel.com

Collini Cutlery is the official distributor for Italy of the Japanese MCUSTA knives

The SHINRA MAXIMA series uses Japanese sintered and cryogenically hardened SPG2 in 3-layer laminate, one of the best ever produced in Japan

Intended use: sports / collection

Type of production: industrial cut - assembly and handmade finishes
Lama production: Japan
Blade: 61 / 62HRC SPG-2 stainless steel in three-layer San Mai laminate
Handle: Micarta
Blade length: 90mm.
Blade thickness: 3mm.
Length closed: 117mm.
Total length: 211mm.
Thick when closed: 17.5mm.
Weight: 105g.
Closure: Liner Lock
Clip: stainless steel
Packaging: cardboard box with Mcusta logos
Note: -

For more information on the steel used you can view the site: www.collinisteel.com

Collini Cutlery is the official distributor for Italy of the Japanese MCUSTA knives

Intended use: dirty / collection

Type of production: industrial cut - assembly and handmade finishes
Blade: SPG2 61 / 62HRC
Blade treatment: -
Lama production: Japan
Handle: damask steel and pakka wood
Blade length: 70mm.
Blade thickness: 3mm.
Length closed: 96mm.
Total length: 166mm.
Balancing: -
Weight: 96g.
Closure: Liner Lock
Clip: -
Sheath: cordura
Note: -

Collini Cutlery is the official distributor of MCUSTA Japanese knives for Italy

Intended use: sports / collection

Type of production: industrial cutting - craft assembly and finishing
Blade: in SanMai steel with VG-10 stainless steel cutting edge at 59 / 60HRC and outer cheeks in 33-layer nickel damask
Production Lama: Japan
Handle: Iron Wood
Blade length: 70mm.
Blade thickness: 3mm.
Length closed: 95mm.
Total length: 167mm.
Balancing: -
Weight: 66g.
Closure: Liner Lock
Clip: -
Sheath: fabric bag
Note: -

Collini Cutlery is the official distributor of MCUSTA Japanese knives for Italy

The Sengoku series uses 3-layer SPG2 sintered and cryogenically hardened Japanese steel, one of the best ever produced in Japan

Intended use: sports / collection

Type of production: industrial cutting - craft assembly and finishing
Production Lama: Japan
Blade: in SPG-2 stainless steel at 61 / 62HRC in San Mai three-layer laminate
Handle: Iron Wood
Blade length: 95mm.
Blade thickness: 3mm.
Length closed: 115mm.
Total length: 207mm.
Thick when closed: 17.5mm.
Weight: 100g.
Closure: Liner Lock
Clip: in stainless steel
Packaging: cardboard box with Mcusta logos
Note: -

For more information on the steel used, you can view the site: www.collinisteel.com

Collini Cutlery is the official distributor of MCUSTA Japanese knives for Italy

The Sengoku series uses 3-layer SPG2 sintered and cryogenically hardened Japanese steel, one of the best ever produced in Japan

Intended use: sports / collection

Type of production: industrial cutting - craft assembly and finishing
Production Lama: Japan
Blade: in SPG-2 stainless steel at 61 / 62HRC in San Mai three-layer laminate
Handle: Corian
Blade length: 95mm.
Blade thickness: 3mm.
Length closed: 115mm.
Total length: 207mm.
Thick when closed: 17.5mm.
Weight: 100g.
Closure: Liner Lock
Clip: in stainless steel
Packaging: cardboard box with Mcusta logos
Note: -

For more information on the steel used, you can view the site: www.collinisteel.com

Collini Cutlery is the official distributor of MCUSTA Japanese knives for Italy

The Sengoku series uses 3-layer SPG2 sintered and cryogenically hardened Japanese steel, one of the best ever produced in Japan

Intended use: sports / collection

Type of production: industrial cutting - craft assembly and finishing
Production Lama: Japan
Blade: in SPG-2 stainless steel at 61 / 62HRC in San Mai three-layer laminate
Handle: Micarta
Blade length: 95mm.
Blade thickness: 3mm.
Length closed: 115mm.
Total length: 207mm.
Thick when closed: 17.5mm.
Weight: 100g.
Closure: Liner Lock
Clip: in stainless steel
Packaging: cardboard box with Mcusta logos
Note: -

For more information on the steel used, you can view the site: www.collinisteel.com

Collini Cutlery is the official distributor of MCUSTA Japanese knives for Italy

The Sengoku series uses 3-layer SPG2 powder steel and cryogenically hardened Japanese steel, one of the best ever produced in Japan

Intended use: sports / collection

Type of production: industrial cutting - craft assembly and finishing
Production Lama: Japan
Blade: stainless steel SPG-2 at 61 / 62HRC
Handle: Pakka Wood
Blade length: 93mm.
Blade thickness: 3mm.
Length closed: 117mm.
Total length: 210mm.
Thick when closed: 17.5mm.
Weight: 120g.
Closure: Liner Lock
Clip: -
Packaging: cardboard box with Mcusta logos
Notes: cordura sheath and leather

Intended use: sporting/collection

Type of production: industrial cut - handcrafted assembling and finishing
Blade production: Japan
Blade: SPG-2 stainless steel at 61/62HRC in three layers San Mai laminate
Handle: Micarta
Blade length: 93mm.
Blade thickness: 3mm.
Length closed: 117mm.
Total length: 210mm.
Thickness when closed: 17.5mm.
Weight: 120g.
Closure: Liner Lock
Clip: -
Package: cardboard box with Mcusta logos
Notes: Cordura and leather sheath

Intended Use: sport / collection

Type of production: Industrial cutting - assembly and handcrafted finishes
Production Lama: Japan
Blade: stainless steel sanmai with sharp VG-10 to 59 / 60HRC and External cheeks damask nickel to 33 layers
Handle: Micarta
Blade length: 93mm.
Blade thickness: 3mm.
Closed Length: 117mm.
Overall length: 210mm.
Thick when closed: 17.5mm.
Weight: 120g.
Lock: Liner Lock
Clips: stainless steel
Packaging: cardboard box with logos Mcusta
Notes: Cordura sheath and leather

Mcusta - Sengoku VG10 knife - MC-0181 Oda Nobunaga - knife

Intended Use: sport / collection

Type of production: Industrial cutting - assembly and handcrafted finishes
Production Lama: Japan
Blade: Stainless Steel VG-10 to 59 / 60HRC
Handle: Black Micarta
Blade length: 93mm.
Blade thickness: 3mm.
Closed Length: 117mm.
Overall length: 210mm.
Thick when closed: 17.5mm.
Weight: 120g.
Lock: Liner Lock
Clips: stainless steel
Packaging: cardboard box with logos Mcusta
Notes: Cordura sheath and leather

Mcusta - Sengoku Damascus knife - MC-0181D Oda Nobunaga - knife

Intended Use: sport / collection

Type of production: Industrial cutting - assembly and handcrafted finishes
Production Lama: Japan
Blade: stainless steel sanmai with sharp VG-10 to 59 / 60HRC and External cheeks damask nickel to 33 layers
Handle: Black Micarta
Blade length: 93mm.
Blade thickness: 3mm.
Closed Length: 117mm.
Overall length: 210mm.
Thick when closed: 17.5mm.
Weight: 120g.
Lock: Liner Lock
Clips: stainless steel
Packaging: cardboard box with logos Mcusta
Notes: Cordura sheath and leather

Intended use: Sports / Collection

Type of production: Industrial cutting - assembly and handcrafted finishes
Production Lama: Japan
Blade: sanmai sharp stainless steel with VG-10 59 / 60HRC and External cheeks damask nickel to 33 layers
Blade treatment: -
Handle: Corian
Blade length: 87mm.
Blade Thickness: 3mm.
Closed Length: 110mm.
Overall length: 193mm.
Balancing: -
Weight: 98g.
Lock: Liner Lock
Clip: Steel
Sheath: -
Notes: -

Emerson - EDC-2 multitool TAN G10 - knife

Intended Use: Tactical / Military / Multipurpose

Type of production: Industrial
Production Lama: Taiwan
Blade: Stainless steel 440C
Treatment Lama: black
Handle: G-10
Blade length: 65mm.
Blade thickness: 2.5 mm.
Closed Length: 105mm.
Overall length: 173mm.
Thick when closed: 16mm.
Balancing: -
Weight: 134g.
Lock: Liner Lock
Clips: stainless steel
Sheath: -
Packaging: cardboard box with logos Emerson
Notes: utility knife with lock tools

Mcusta - Series Katana - MC-0041C - knife

Intended use: sports / collection

Type of production: industrial cutting - assembly and handcrafted finishes
Production Lama: Japan
Blade: laminated steel with sharp VG-10 to 59/60 HRC
Handle: Aluminum
Blade length: 80mm.
Blade thickness: 3mm.
Closed Length: 110mm.
Overall length: 194mm.
Thick when closed: 14mm.
Weight: 96g.
Lock: Liner Lock
Clip: Stainless Steel
Packaging: cardboard box with logos Mcusta
Notes: -

Collini Cutlery is the official distributor of MCUSTA Japanese knives for Italy

The Sengoku series uses 3-layer SPG2 powder steel and cryogenically hardened Japanese steel, one of the best ever produced in Japan

Intended use: sports / collection

Type of production: industrial cutting - craft assembly and finishing
Production Lama: Japan
Blade: stainless steel SPG-2 at 61 / 62HRC
Handle: Pakka Wood
Blade length: 93mm.
Blade thickness: 3mm.
Length closed: 117mm.
Total length: 210mm.
Thick when closed: 17.5mm.
Weight: 120g.
Closure: Liner Lock
Clip: -
Packaging: cardboard box with Mcusta logos
Notes: -

Mcusta - Basic Series Rosewood - MC-0014R - knife

Intended use: Sport

Type of production: Industrial
Production Lama: Japan
Blade: Stainless VG-10
Treatment Lama: Satin
Handle: Rosewood wood
Blade length: 85mm.
Blade thickness: 3mm.
Closed Length: 110mm.
Overall length: 190mm.
Thick when closed: 15mm.
Balancing: -
Weight: 96g.
Lock: Liner Lock
Clip: Stainless Steel
Sheath: -
Packing: brown cardboard box with logos Mcusta
Notes: -

Mcusta - Tsuchi Green - MC-163D - knife

Type of production: industrial cutting - assembly and handcrafted finishes 

Production Lama: Japan
Blade: Damascus steel rolled and hammered with sharp VG-10 to 59/60 HRC
Handle: Aluminum
Blade length: 85mm.
Blade thickness: 3mm.
Closed Length: 110mm.
Overall length: 190mm.
Thick when closed: 14mm.
Weight: 94g.
Lock: Liner Lock
Clip: Stainless Steel
Packaging: cardboard box with logos Mcusta
Notes: -

Cutlery Collini is the official distributor for Italy of Japanese knives Mcusta

Intended use: sports / collection

Type of production: industrial cutting - assembly and handcrafted finishes
Blade: Stainless sanmai with sharp steel VG-10 to 59/60 HRC and cheeks outside Damascus nickel to 33 layers
Production Lama: Japan
Handle material: stainless steel
Blade length: 70mm.
Blade Thickness: 3mm.
Closed Length: 95mm.
Overall length: 164mm.
Balancing: -
Weight: 90g.
Lock: Liner Lock
Clip: -
Sheath: Belt, Nylon, with traditional motifs
Notes: -

Cutlery Collini is the official distributor for Italy of Japanese knives Mcusta

Intended use: sports / collection

Type of production: industrial cutting - assembly and handcrafted finishes
Blade: Stainless sanmai with sharp steel VG-10 to 59/60 HRC and cheeks outside Damascus nickel to 33 layers
Production Lama: Japan
Handle material: stainless steel
Blade length: 70mm.
Blade Thickness: 3mm.
Closed Length: 95mm.
Overall length: 164mm.
Balancing: -
Weight: 90g.
Lock: Liner Lock
Clip: -
Sheath: Belt, Nylon, with traditional motifs
Notes: -

Mcusta - Jazz Knife Damascus Cocobolo Ebony African MC-0171D - knife

Collini Cutlery is the official distributor for Italy of Japanese knives Mcusta

Intended use: sporivo / collection

Type of production: industrial cutting - assembly and handcrafted finishes
Blade: VG-10 59/60HRC
Treatment Blade: -
Blade Production: Japan
Handle: wood cocobolo and ebony wood african with steel insert
Blade length: 80mm.
Blade Thickness: 3mm.
Closed Length: 110mm.
Overall length: 193mm.
Balancing: -
Weight: 90g.
Lock: Liner Lock
Clip this
Sheath: Cordura
Notes: -

Coltelleria Collini is the official distributor for Italy of the Japanese MCUSTA knives

Intended use: dirty / collection

Type of production: industrial cut - assembly and handmade finishes
Blade: SPG2 61 / 62HRC
Blade treatment: -
Lama production: Japan
Handle: satin steel and wooden insert
Blade length: 70mm.
Blade thickness: 3mm.
Length closed: 96mm.
Total length: 168mm.
Balancing: -
Weight: 82g.
Closure: Liner Lock
Clip: present
Sheath: cordura
Note: -

Mcusta - Riple knife - MC-0142 - knife

Collini Cutlery is the official distributor for Italy of Japanese knives Mcusta

Intended use: sporivo / collection

Type of production: industrial cutting - assembly and handcrafted finishes
Blade: VG-10 59/60HRC
Treatment Blade: -
Blade Production: Japan
Handle material: stainless steel satin and ebony inlay
Blade length: 70mm.
Blade Thickness: 3mm.
Closed Length: 96mm.
Overall length: 166mm.
Balancing: -
Weight: 86g.
Lock: Liner Lock
Clip: -
Sheath: Cordura
Notes: -

Mcusta - Mari Damascus Japan - MC-0036D - knife

Collini Cutlery is the official distributor for Italy of Japanese knives Mcusta

Intended Use: Sport / collection

Type of production: industrial cutting - assembly and handcrafted finishes
Blade: Stainless steel sanmai with sharp VG-10 to 59/60HRC cheeks and external nickel damascus 33 layers
Blade Production: Japan
Handle: damascus steel
Blade length: 70mm.
Blade Thickness: 3mm.
Closed Length: 95mm.
Overall length: 164mm.
Balancing: -
Weight: 84g.
Lock: Liner Lock
Clip: -
Sheath: -
Notes: -

Mcusta - Gentleman Folder Damascus Japan - MC-0052D - knife

Intended Use: Sport / collection

Type of production: industrial cutting - assembly and handcrafted finishes
Blade: Stainless steel sanmai with sharp VG-10 to 59/60HRC cheeks and external nickel damascus 33 layers
Blade Production: Japan
Handle material: G10
Blade length: 70mm.
Blade Thickness: 3mm.
Closed Length: 95mm.
Overall length: 167mm.
Balancing: -
Weight: 66g.
Lock: Liner Lock
Clip: -
Sheath: -
Notes: -

Collini Cutlery is the official distributor of MCUSTA Japanese knives for Italy

Intended use: sports / collection

Type of production: industrial cutting - craft assembly and finishing
Production Lama: Japan
Blade: in SanMai steel with VG-10 stainless steel cutting edge at 59 / 60HRC and outer cheeks in 33-layer nickel damask
Handle: cocobolo wood
Blade length: 95mm.
Blade thickness: 3mm.
Length closed: 115mm.
Total length: 207mm.
Thick when closed: 17.5mm.
Weight: 100g.
Closure: Liner Lock
Clip: in stainless steel
Packaging: cardboard box with Mcusta logos
Note: -

Intended Use: Sport / collection

Type of production: industrial cutting - assembly and handcrafted finishes
Blade Production: Japan
Blade: damascus steel laminate and hammered with sharp VG-10 to 59/60HRC
Handle: Aluminum
Blade length: 85mm.
Blade thickness: 3mm.
Closed Length: 110mm.
Overall length: 190mm.
Thick when closed: 14mm.
Weight: 94g.
Lock: Liner Lock
Clip: Stainless Steel
Packaging: cardboard box with logos Mcusta
Notes: -

Intended Use: Sport / collection

Type of production: industrial cutting - assembly and handcrafted finishes
Blade Production: Japan
Blade: damascus steel laminate and hammered with sharp VG-10 to 59/60HRC
Handle: Aluminum
Blade length: 85mm.
Blade thickness: 3mm.
Closed Length: 110mm.
Overall length: 190mm.
Thick when closed: 14mm.
Weight: 94g.
Lock: Liner Lock
Clip: Stainless Steel
Packaging: cardboard box with logos Mcusta
Notes: -

Emerson - Commander Black Plain Wave - EK502 - knife

Intended use: Tactical / Military

Type of production: semi-homemade
Blade: Stainless steel 154CM
Treatment Blade: Black-Ti
Production Lama USA
Handle: G-10 with titanium liners
Blade length: 92mm.
Blade Thickness: 3.5 mm.
Closed Length: 130mm.
Overall length: 225mm.
Balancing: -
Weight: 165g.
Lock: Liner Lock
Clip: Stainless Steel
Sheath: -
Notes: opening system wave

Mcusta - Gentleman Folder Damascus Japan - MCU79D - knife

Intended use: sports / collection

Type of production: industrial cutting - craft assembly and finishing
Blade: in SanMai steel with VG-10 stainless steel cutting edge at 59 / 60HRC and outer cheeks in 33-layer nickel damask
Production Lama: Japan
Handle: Pakkawood wood
Blade length: 70mm.
Blade thickness: 3mm.
Length closed: 95mm.
Total length: 167mm.
Balancing: -
Weight: 66g.
Closure: Liner Lock
Clip: -
Sheath: fabric bag
Note: -

Intended Use: Sport / collection

Type of production: industrial cutting - assembly and handcrafted finishes
Blade: Stainless sanmai with sharp steel VG-10 to 59/60HRC cheeks and external nickel damascus 33 layers
Blade Production: Japan
Handle material: wood
Blade length: 70mm.
Blade Thickness: 3mm.
Closed Length: 95mm.
Total length: 167mm.
Balance: -
Weight: 66g.
Lock: Liner Lock
Clip: -
Sheath: -
Notes: -

Collini Cutlery is the official distributor of MCUSTA Japanese knives for Italy

Intended use: sports / collection / gentlemen

Type of production: industrial cutting - craft assembly and finishing
Blade: in SanMai steel with VG-10 stainless steel cutting edge at 59 / 60HRC and outer cheeks in 33-layer nickel damask
Production Lama: Japan
Handle: Iron Wood
Blade length: 65mm.
Blade thickness: 3mm.
Length closed: 95mm.
Total length: 164mm.
Balancing: -
Weight: 58g.
Closure: Liner Lock
Clip: -
Sheath: in fabric
Note: -

BlackHawk ! Blades - Crucible II Folding Plain - 15C201BK knife

The brand BlackHawk ! Blades was born after the recent acquisition of MOD / Master of Defense by BlackHawk ! - American company leader in tactical gear. The new products keep high quality standards to which MOD we had become accustomed and speak directly to the police and martial artists in fighting techniques with a knife.

Intended Use: Tactical

Type of production : industrial
Blade: AUS-8 stainless steel
Treatment Blade: Teflon
Production Blade: Taiwan
Handle material: 1.5mm stainless steel liners , Cheeks G-10
Blade length : 90mm .
Blade Thickness: 3mm.
Length closed: 119mm .
Total length : 200mm .
Balance: -
Weight: 184g .
Lock: Liner Lock
Clip: Removable , multi-position stainless steel TiNi
Sheath: -
Notes: knife designed by Kelly McCann (aka Jim Grover ), founder of Crucible Security , one of the most important agencies of security services

Intended Use: Tactical

Type of production: industrial
Blade: stainless steel CPM-S30V
Treatment Lama: -
Production Lama USA
Handle material: G10
Blade length: 75mm.
Blade Thickness: 3mm.
Closed Length: 75mm
Total length: 175mm.
Balance: -
Weight: 110g.
Lock: Liner Lock
Clip: Stainless Steel
Sheath: -

LoneWolf - Loveless Clip Point Folder - knife

Intended use: Sport

Type of production: Industrial
Production Blade: Italy
Blade: 154CM stainless steel
Treatment Blade: -
Handle: Micarta
Blade length: 75mm.
Blade thickness: 3mm.
Length closed: -
Overall length: 190mm.
Thick when closed: -
Balancing: -
Weight: 128g.
Lock: Liner Lock
Clip: -
Sheath: Leather
Packaging: cardboard box with logos Lonewolf
Notes: Design by Loveless

La Coltelleria Collini è distributore ufficiale per l’Italia dei coltelli giapponesi MCUSTA

Destinazione d'uso: sporivo/collezione

Tipo di produzione: taglio industriale - montaggio e finiture artigianali
Lama: VG-10 59/60HRC e guance esterne in acciaio inox
Trattamento Lama: -
Produzione Lama: Japan
Manicatura: acciaio damasco e cocobolo
Lunghezza lama: 70mm.
Spessore della lama: 3mm.
Lunghezza chiuso: 96mm.
Lunghezza totale: 166mm.
Bilanciatura: -
Peso: 96g.
Chiusura: Liner Lock
Clip: -
Fodero: cordura
Note: -

Intended use: sports

Type of production: Industrial
Production Lama: Japan
Blade: VG-10 steel
Blade treatment: Satin finish
Handle: Ebony wood
Blade length: 85mm.
Blade thickness: 3mm.
Length closed: 110mm.
Total length: 190mm.
Thick when closed: 15mm.
Balancing: -
Weight: 96g.
Closure: Liner Lock
Clip: -
Sheath: in cordura, attention may vary from what is shown in the photo
Packaging: brown cardboard box with Mcusta logos
Note: -

La Coltelleria Collini è distributore ufficiale per l’Italia dei coltelli giapponesi MCUSTA

Destinazione d'uso: Sportivo/Collezione

Tipo di produzione: taglio industriale - montaggio e finiture artigianali
Produzione Lama: Japan
Lama: in acciaio SanMai con tagliente inox VG-10 59/60HRC e guance esterne in damasco al nickel a 33 strati
Trattamento Lama: -
Manicatura: Micarta
Lunghezza lama: 87mm.
Spessore della lama: 3mm.
Lunghezza chiuso: 110mm.
Lunghezza totale: 193mm.
Bilanciatura: -
Peso: 98g.
Chiusura: Liner Lock
Clip: in acciaio
Fodero: -
Note: -

Collini Cutlery is the official distributor of MCUSTA Japanese knives for Italy

Intended use: sports / collection

Type of production: industrial cutting - craft assembly and finishing
Production Lama: Japan
Blade: in SanMai steel with VG-10 stainless steel cutting edge at 59 / 60HRC and outer cheeks in 33-layer nickel damask
Blade treatment: -
Handle: Iron Wood
Blade length: 87mm.
Blade thickness: 3mm.
Length closed: 110mm.
Total length: 194mm.
Thick when closed: 17.5mm.
Balancing: -
Weight: 92g.
Closure: Liner Lock
Clip: in stainless steel
Sheath: -
Packaging: cardboard box with Mcusta logos
Note: -

Collini Cutlery is the official distributor for Italy of MCUSTA Japanese knives

Destination of use: sport / collection

Type of production: industrial cutting - assembly and artisan finishes
Lama production: Japan
Blade: SanMai steel with sharp stainless steel VG-10 at 59 / 60HRC and external chevron damask with 33 layers nickel
Handle: Micarta
Blade length: 95mm.
Blade thickness: 3mm.
Length closed: 115mm.
Total length: 207mm.
Thick when closed: 17.5mm.
Weight: 100g.
Closure: Liner Lock
Clip: stainless steel
Packaging: cardboard box with Mcusta logos
Note: -

Intended Use: Sport / collection

Type of production: industrial cutting - assembly and handcrafted finishes
Blade Production: Japan
Blade: Stainless steel sanmai with sharp VG-10 to 59/60HRC cheeks and external nickel damascus 33 layers
Handle material: Burl quince (apple quince)
Blade length: 95mm.
Blade thickness: 3mm.
Closed Length: 115mm.
Overall length: 207mm.
Thick when closed: 17.5mm.
Weight: 100g.
Lock: Liner Lock
Clip: Stainless Steel
Packaging: cardboard box with logos Mcusta
Notes: -

Intended use: sports / collection

Type of production: industrial cutting - craft assembly and finishing
Blade: in SanMai steel with VG-10 stainless steel cutting edge at 59 / 60HRC and outer cheeks in 33-layer nickel damask
Country of production: Japan
Handle: damask steel
Blade length: 70mm.
Blade thickness: 3mm.
Length closed: 95mm.
Total length: 164mm.
Balancing: -
Weight: 88g.
Closure: Liner Lock
Clip: -
Sheath: -
Note: -