Knives, collection knife, tactical knives, outdoor knives, pocket knives and tools
-
CRKT - M16-12LE knife Small Law Enforcement Tanto - PRIVATE COLLECTION - knife
KNIFE RETIRED FROM PRIVATE COLLECTION
* Provenance: Collected by a private individual, previously purchased
* Condition: Overall in very good condition
* Commercially available: Discontinued
* Sharpness: Factory
* Marks on blade: small marks on tip
* Marks on handle: clip slightly marked
* Box: Without box
* Sheath: /
* Manuals, Certificates and Warranties: -
* Checked and Certified by our internal laboratoryBlade: Teflon-coated AUS-8 high-carbon 57/58HRC stainless steel
Handle: Zytel grips
Blade length: 76 mm.
Blade thickness: 3 mm.
Total length: 185mm.
Weight: 97g.
Closure: Liner Lock
Clip: Stainless Steel
Notes: equipped with safety catchAP-CM16-12LE -
CRKT - P.S.D. II (Particle. Separation. Device.) by Hammond - AUS-10 & Brown G10 - 7910 - knife
Jim Hammond's original P.S.D. earned its name (Particle. Separation. Device.) for its ability to cut anything, anywhere. The P.S.D. II brings that same capability to a smaller, more portable folding knife, reducing the overall length by more than an inch. The blade is made of corrosion-resistant AUS10 with assisted opening on IKBS ball bearings that ensure quick and easy one-handed operation.
Intended Use: Tactical / EDC
Production Type: Industrial
Country of Production: Taiwan
Blade: Stainless steel AUS-10A
Blade Treatment: Black Oxide
Handle: G10
Blade Length: 76mm.
Blade thickness: 2.8mm.
Length closed: 101mm.
Total length: 178mm.
Weight: 102g.
Closure: Liner Lock
Clip: stainless steel, removable
Packaging: cardboard box with CRKT logos
Notes: Design by Jim Hammond - Assisted opening via Carson Flipper system and IKBS ball bearing movementC7910 -
CRKT - A.B.C. (All. Bases. Covered.) by Hammond - 12C27 & Black G10 - 2606 - knife
Jim Hammond's A.B.C. (All. Bases. Covered.) makes its return in an even more versatile form. It is now a folder, bringing the varied capabilities of the original fixed blade into a more convenient and compact design. With its assisted opening and IKBS pads, it's always ready for action at any time, while the G10 handle provides a strong grip even in adverse weather conditions.
Intended Use: Tactical
Production Type: Industrial
Country of Production: China
Blade: Sandvik 12C27 stainless steel
Blade treatment: Black Oxide
Handle: G10
Blade Length: 85.9mm.
Blade thickness: 3.1mm.
Length closed: 116mm.
Total length: 203mm.
Weight: 110g.
Closure: Liner Lock
Clip: stainless steel, removable
Packaging: cardboard box with CRKT logos
Notes: Design by Jim Hammond - Assisted opening via Carson Flipper system and IKBS ball bearing movementC2606 -
CRKT - CEO MicroFlipper Sheepfoot by Rogers - 7083 - knife
The smaller version of the popular CEO folding knife, the Microflipper combines refined style with maximum practicality. It may be small, but it's a serious contender for any job thanks to its lightweight aluminum handle and razor-sharp blade made of Sandvik 12C27™ steel.
This stylish pocket knife is available in two versions: drop-point blade with silver aluminum handle and blue coating, or sheepfoot blade with blue aluminum handle and silver coating.
* Superior performance: Sandvik 12C27™ steel for excellent edge retention.
* Smooth opening: IKBS™ ball-bearing motion allows smooth blade opening.
* Fast opening: Flipper opening system deploys the blade quickly.
* Sturdy and lightweight: Aluminum handle combines strength and minimal weight
* Easy closing: The blade can be easily closed with one hand.
* Carrying options: Adjustable ambidextrous clip for carrying in left or right pocket
Intended Use: EDC / Sporting
Production Type: Industrial
Country of Production: China
Blade: Sandivk 12C27 stainless steel
Blade Finish: Satin finish
Handle: Aluminum
Blade length: 56mm.
Blade thickness: 2.2mm.
Length closed: 82mm.
Total length: 140mm.
Weight: 48g.
Closure: Liner Lock
Clip: stainless steel, removable and reversible
Packaging: cardboard box with CRKT logos
Notes: Design by Richard Rogers - Carson Flipper opening system on IKBS ball bearingsC7083 -
CRKT - CEO MicroFlipper Drop Point by Rogers - 7081 - knife
The smaller version of the popular CEO folding knife, the Microflipper combines refined style with maximum practicality. It may be small, but it's a serious contender for any job thanks to its lightweight aluminum handle and razor-sharp blade made of Sandvik 12C27™ steel.
This stylish pocket knife is available in two versions: drop-point blade with silver aluminum handle and blue coating, or sheepfoot blade with blue aluminum handle and silver coating.
* Superior performance: Sandvik 12C27™ steel for excellent edge retention.
* Smooth opening: IKBS™ ball-bearing motion allows smooth blade opening.
* Fast opening: Flipper opening system deploys the blade quickly.
* Sturdy and lightweight: Aluminum handle combines strength and minimal weight
* Easy closing: The blade can be easily closed with one hand.
* Carrying options: Adjustable ambidextrous clip for carrying in left or right pocket
Intended Use: EDC / Sporting
Production Type: Industrial
Country of Production: China
Blade: Sandivk 12C27 stainless steel
Blade Finish: Satin finish
Handle: Aluminum
Blade length: 60mm.
Blade thickness: 2.2mm.
Length closed: 82mm.
Total length: 143mm.
Weight: 48g.
Closure: Liner Lock
Clip: stainless steel, removable and reversible
Packaging: cardboard box with CRKT logos
Notes: Design by Richard Rogers - Carson Flipper opening system on IKBS ball bearingsC7081 -
CRKT - Carson M16-13DSFG Tan Special Forces - PRIVATE COLLECTION - pocket knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased.
* Condition: Overall in very good condition.
* Commercially available: Discontinued
* Sharpening: Factory sharpened
* Marks on blade: A couple of small marks on Tan-colored finish, unnoticeable
* Marks on handle: None
* Box: Present
* Scabbard: /
* Manuals, Certificates and Warranties: Present
* Checked and Certified by our in-house laboratory
Intended Use: Sporting/TacticalProduction Type: Industrial
Country of Production: China
Blade: Stainless steel AUS-8
Blade Finish: Tan Oxide
Handle: PVD steel folders with G10 Tan grips
Blade length: 100mm.
Blade thickness: 3.5mm.
Length closed: 140mm.
Total length: 240mm.
Weight: 150g.
Opening: Carson Flipper system
Closure: Liner Lock with auto LAWKS security system
Clip: multi-position, removable, Black Oxide stainless steel
Packaging: cardboard box with CRKT logos
Notes: Design by Kit Carson - Carson Flipper opening systemM16-13DSFG-CP -
CRKT - CEO Bamboo by Rogers - 7096YGK - knife
Intended use: Sports
Type of production: Industrial
Country of production: China
Blade: 8Cr13Mov 58/60 HRC stainless steel
Blade treatment: Blackwashed
Handle: Nylon reinforced with fiberglass
Blade length: 79mm.
Blade thickness: 2.2mm.
Length closed: 113mm.
Total length: 194mm.
Weight: 59g.
Closing: Liner Lock
Clip: stainless steel, removable and reversible
Packaging: cardboard box with CRKT logos
Notes: Design by Richard Rogers - IKBS ball bearing opening system - Winner of the 2019 Blade Show as "Best Buy Of The Year"C7096YGK -
CRKT - Piet by Vox - 5390 - knife
Intended use: Sports
Type of production: Industrial
Country of production: China
Blade: 8Cr13Mov 58/60 HRC stainless steel
Blade treatment: Satin finish
Handle: Nylon reinforced with fiberglass with anodized titanium spacer
Blade length: 68mm.
Blade thickness: 3.3mm.
Length closed: 95mm.
Total length: 164mm.
Weight: 71g.
Closing: Liner Lock
Clip: stainless steel, removable and reversible
Packaging: cardboard box with CRKT logos
Notes: Design by Jesper VoxnaesC5390 -
CRKT - Hi Jinx Z by Ken Onion - K281KXP - PRIVATE COLLECTION - Pocket Knife
KNIFE WITHDRAWN FROM A PRIVATE COLLECTION
* Provenance: withdrawn from a private collection, previously purchased.
* Condition: like new
* Commercially available: discontinued
* Sharpening: factory sharpened
* Marks on the blade: None
* Marks on the handle: None
* Box: Present
* Scabbard: /
* Manuals, certificates and warranties: Available
* Tested and certified by our in-house laboratory.Intended Use: Sporting
Production Type: Industrial
Country of manufacture: China
Blade: Stainless steel 1.4116
Blade finish: Satin surface
Handle: GFN nylon
Blade length: 84 mm.
Blade thickness: 2.3 mm.
Length closed: 120 mm.
Total length: 203 mm.
Weight: 139 g.
Closure: Liner Lock
Clip: Stainless steel, removable and reversible
Packaging: Cardboard box with CRKT logo
Notes: Ball bearing opening with IKBS system - Opening via Carson pinball system - Design by Ken OnionCK281KXP -
CRKT - Carson M16-12ZLEK Law Enforcement Zytel Folding Tanto - knife
Blade: Stainless steel AUS-8 high-carbon 57 / 58HRC Teflon
Handle: Zytel Grips
Blade length: 76 mm.
Blade thickness: 3 mm.
Overall length: 185 mm.
Weight: 102 g.
Lock: Liner Lock
Clip: Stainless Steel
Notes: equipped with safety locks and AutoLAWKS guard Carson Flipper tagliacinture with integrated rear window breakerCM16-12ZLEK -
CRKT - M16-04Z by Kit Carson - knife
Intended use: Sport
Type of production: Industrial
Production Blade: Taiwan
Blade: AUS-8 stainless steel
Treatment Lama: -
Handle: Zytel
Blade length: 94mm.
Blade thickness: 3.5mm.
Closed Length: 134mm.
Total length: 230mm.
Thick when closed: 17mm.
Balance: -
Weight: 182g.
Lock: Liner Lock locking system with self-LAWKS
Clip: Stainless Steel
Sheath: -
Packaging: cardboard box with logos CRKT
Notes: -CM16-04Z -
CRKT - Carson M16-14SFG - Special Forces Big Dog G10 knife
Intended use: Sports
Type of production: Industrial
Country of production: China
Blade: Stainless steel 8Cr14MoV to 58-60 HRC
Blade treatment: Ti-Ni
Handle: G-10
Blade length: 100mm.
Blade thickness: 3.5mm.
Length closed: 135mm.
Total length: 235mm.
Thick when closed: 17mm.
Balancing: -
Weight: 180g.
Closure: Liner Lock with auto-LAWKS locking system
Clip: stainless steel
Sheath: -
Packaging: cardboard box with CRKT logos
Note: -CM16-14SFG -
CRKT - Ripple Black Liner Lock by Ken Onion - K415KXP - Coltello
Destinazione d'uso: Sportivo / EDC
Tipo di produzione: Industriale
Paese di produzione: China
Lama: In acciaio inox 8Cr14MoV
Finitura lama: Satinatura
Manicatura: Alluminio Aeronautico
Lunghezza lama: 80mm.
Spessore lama: 2.5mm.
Lunghezza chiuso: 110mm.
Lunghezza totale: 185mm.
Spessore da chiuso: 8mm.
Peso: 66g.
Chiusura: Liner Lock
Clip: amovibile, in acciaio inox
Confezione: scatola in cartone con loghi CRKT
Note: Versione First Production Run - Sistema di apertura IKBS (Ikoma Korth Bearing System) su cuscinetti a sfera - Design by Ken Onion3803 -
Rockstead - Shin - Clad ZDP189 & Aluminum and Samekawa - folding knife
With Rockstead brand of Ishida Co. Sakai, Japan, they are currently marketed with the best industrial knives currently in production.
Created by Katsumi Kitano, who for 20 years has been producing quality knives so much to have been awarded the highest award among the knife craftsmen in Japan, you demonstrate exceptional both in cutting capacity, penetration and tightness of the wire both in terms of innovation for and materials used for the construction techniques.
Blade: ZDP189 rolled stainless steel at 66.6 HRC inside and VG10 at 60.8 HRC outside
Handle: Same (real ray skin) and aircraft aluminum with black alumite treatment to HV400
Blade length: 95 mm.
Blade thickness: 4 mm.
Overall length: 210 mm.
Weight: 145 g.
Lock: Liner Lock steel in 52HRC 402J2
Clip: Steel 402J2 to 52HRC
Notes: Accompanied by a certificate of guarantee with the technical specifications.RO-SHIN-ZDP -
Rockstead - 2010 Higo-MH-DLC Serial #303 - YXR7 HPC & Micarta - PRIVATE COLLECTION - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: In very good condition
* Commercially available Discontinued
* Sharpening: Factory
* Marks on blade: -
* Marks on handle: - -
* Box: marketed in silk pouch.
* Scabbard: Leather, belt, original, with a few small marks given by time.
* Manuals, Certificates and Warranties: present.
* Checked and Certified by our in-house laboratory
The HIGO-MH-DLC folder features a 3.5-inch YXR7 blade with DLC coating and Micarta handle. The incredible mirror finish is achieved by heat treating the blade and gradually grinding by hand with wet and dry sandpaper of 400, 600, 800, 1,200 and 2,000. The HIGO-MH-DLC comes with a black leather belt case with a slot to hold the included torx wrench.
Country of manufacture: Japan
Type of manufacture: midtech
Blade: DLT571 steel (Hitachi YXR7 at 64.1HRC with 3micron HPC coating and hardness of Hv1300)
Handle: 2mm stainless steel sus402J2 at 52HRC with micarta handles
Blade length: 90mm.
Blade thickness: 3.5mm.
Total length: 216mm.
Weight: 139g.
Closure: Liner Lock
Clip: stainless steel
Notes: Serial number 303 - 2010 knife accompanied by warranty certificate with technical specifications - Model discontinued and no longer commercially availableRO-HIMHDLC-CP -
CRKT - Carson knife M21-14SFG - Special Forces - knife
Intended use: Tactical/Military
Blade: AUS-8 56/58HRC stainless steel
Taiwan blade production
Handle: Aluminum
Blade length: 100mm.
Blade thickness: 3.5mm.
Closed length: 135mm.
Total length: 235mm.
Balancing: -
Weight: 155g.
Closure: Liner Lock
Clip: removable and reversible in stainless steel
Scabbard: -
Notes: design by Carson - AutoLAWKS safety catchM21-14SFG -
Rockstead - CHI ZDP - Shinogi Zukuri Clad Steel SanMai ZDP189 - knife made in Japan
Under the brand name Rockstead, from Ishida Co. in Sakai, Japan, the best industrial knives currently in production are currently marketed: created by Katsumi Kitano, who has been making quality knives for over 30 years to the extent that he has been awarded the highest distinction among artisan knife makers in Japan, they prove to be exceptional both in cutting ability, penetration and edge-holding and in innovation in the materials used and construction techniques.
Intended Use: Collection/Sportsman
Type of production: Midtech
Country of manufacture: Sakai - Japan
Blade: rolled stainless steel ZDP189 at 66.4 HRC on the inside and VG10 at 61.3 HRC on the outer cheeks
Blade treatment: mirror polish
Handle: Aluminum A6063S with anodization to Hv400 hardness and genuine Breed leather inserts
Blade length: 82mm.
Blade thickness: 3.7mm.
Length closed: 111mm.
Total length: 189mm.
Thickness when closed: 16.2mm.
Weight: 133g.
Opening: via ambidextrous pin
Washers: steel
Closure: Sub FrameLock of 2mm. made of SUS402J2 stainless steel at 50HRC
Clip: deep pocket, 1mm. 420J2 stainless steel with PVD treatment
Packaging: Wooden box with Rockstead logos, certificate with serial number and steel hardness test
Notes: Shinogi Zukuri type blade sharpeningR-CHIZDP -
Citadel - Lancha Rayskin White knife - handmade knife
Intended use: sports / collection
Type of production: Artisan
Production Lama: Cambodia
Blade: in DNH7 carbon steel with 40 / 60HRC selective hardening
Blade treatment: -
Handle: stingray leather
Blade length: 90mm.
Blade thickness: 4mm.
Closed length: 120mm.
Total length: 210mm.
Thick when closed: 25mm.
Balancing: -
Weight: 188g.
Closure: liner lock
Clip: -
Sheath: cordura bag
Packaging: -
Note: -AP-CIT-LRW -
CRKT - IBI Flipper Karambit Kubotan by Vox - 7097 - knife
Intended Use: Tactical / Self Defense Tool / Sporting
Production type: Industrial
Country of Production: China
Blade: D2 steel
Blade Finish: Blackwash
Handle: G-10 with stainless steel liners and copper spacer/karambit ring
Blade length: 68mm.
Blade thickness: 2.9mm.
Length closed: 122mm.
Total length: 190mm.
Weight: 79g.
Closure: Liner Lock
Clip: Stainless steel, removable and reversible
Package: Cardboard box with CRKT logos
Notes: Design by Jesper Voxnaes - Carson Flipper opening system on IKBS ball bearings - Designed for personal defense, when closed it can be used as a karambit and as a kubotan.C7150 -
CRKT - CEO Flipper by Rogers - 7097 - knife
Intended Use: Sporting
Production type: Industrial
Country of Production: Taiwan
Blade: Stainless steel AUS-8 58/60 HRC
Blade Finish: Satin finish
Handle: FRN (Fiberglass Reinforced Nylon) with stainless steel liners
Blade length: 85mm.
Blade thickness: 2.3mm.
Length closed: 110mm.
Total length: 195mm.
Weight: 54g.
Closure: Liner Lock
Clip: Stainless steel, removable and reversible
Package: Cardboard box with CRKT logos
Notes: Design by Richard Rogers - Carson Flipper opening system on IKBS ball bearings - New 2021 version of the CEO 7096 model, winner of the Blade Show 2019 as "Best Buy Of The Year".C7097 -
CRKT - CEO by Rogers - 7096 - knife
Intended use: Sports
Type of production: Industrial
Country of production: China
Blade: 8Cr13Mov 58/60 HRC stainless steel
Blade treatment: Satin finish
Handle: Nylon reinforced with fiberglass
Blade length: 79mm.
Blade thickness: 2.2mm.
Length closed: 113mm.
Total length: 194mm.
Weight: 59g.
Closing: Liner Lock
Clip: stainless steel, removable and reversible
Packaging: cardboard box with CRKT logos
Notes: Design by Richard Rogers - IKBS ball bearing opening system - Winner of the 2019 Blade Show as "Best Buy Of The Year"C7096 -
Rockstead - Shin knife DLC - YXR7 - knife
This knife blade is convex on both sides in the tradition of the highly praised Japanese sword. This shape is both sharp and strong, and can still slice cleanly through a sheet of paper even after the punishment of chopping and cutting through dried bamboo. Using this special blade shape is an excellent way of allowing an edge to be thick without sacrificing any of its sharpness. This knife is of preeminent sharpness. This is a durable knife with strong cutting capabilities that will last for a long time. Even when used for rigorous cutting, the blade will not bite or catch thanks to its convex shape. Other knives will often bite or catch, and may acquire nicks if pulled out suddenly.
Blade: XR-7 steel at 64.3 HRC with DLC treatment
Handle: Same (real breed leather) and aeronautical aluminum with Hv400 black alumite treatment
Blade length: 95 mm.
Blade thickness: 4 mm.
Total length: 210 mm.
Weight: 145 g.
Closing: Liner Lock in 402J2 steel at 52HRC
Clip: in 402J2 steel at 52HRC
Notes: Accompanied by a warranty certificate with technical specifications.RS-SHIN-B -
CRKT - Journeyer Liner Lock by Liong Mah - 6530SWK - knife
Intended use: EDC
Type of production: Industrial
Country of production: China
Blade: 8Cr12MoV stainless steel
Blade treatment: Black Stone Washed
Handle: G10
Blade length: 70mm.
Blade thickness: 2.8mm.
Closed length: 98mm.
Total length: 165mm.
Weight: 82g.
Closure: Liner Lock
Clip: stainless steel, deep pocket type, removable and reversible
Packaging: cardboard box with CRKT logos
Notes: Design by Liong MahC6530SWK -
Rockstead - TEI DLC - 65hrc - knife collection
This knife can still slice paper even after the punishment of striking and cutting dried bamboo.This knife has a beautiful convex surface with extreme sharpness.This is a flagship of the ROCKSTEAD folding knife collection. Both sides of the blade are convex. The blade is in the shape of the traditional Japanese sword. It cuts well and is strong. You can enjoy its strong cutting capabilities for a long time.
Full length: 213.00 mm
Blade length: 93.00 mm
Weight: 155 g
Thickness: 3.70 mm
Material: YXR7
Hardness: HRC65
Blade geometry: Honzukuri
Hard coating: DLC
Knives type: FolderRO-TEI -
CRKT - Homefront EDC by Ken Onion - K250KXP - knife
Intended use: Sports
Type of production: Industrial
Production Country: Taiwan
Blade: stainless steel 1.1416 55/57 HRC
Blade treatment: Stonewashed
Handle: FRN
Blade length: 90mm.
Blade thickness: 3.5mm.
Closed Length: 120mm.
Overall length: 210mm.
Weight: 122g.
Lock: Liner Lock
Clips: stainless steel
Packaging: cardboard box with CRKT logos
Notes: The knife can be easily disassembled and reassembled without the use of tools or screwdrivers - Design by Ken OnionCK250KXP -
CRKT - Ken Onion Wrinkle 2 - K200BXP - knife
Intended use: Sports / EDC
Type of production: Industrial
Production Country: Taiwan
Blade: Stainless steel AUS-8 to 57 / 59HRC
Blade treatment: Satin
Handle: Anodized aluminum with aged effect
Blade length: 65mm.
Blade thickness: 3mm.
Closed Length: 100mm.
Overall length: 165mm.
Weight: 96g.
Lock: Liner Lock
Clip: removable, stainless steel
Packaging: cardboard box with CRKT logos - Design by Ken Onion - opening system on IKBS type ball bearings with open type Carson FlipperCK200BXP -
CRKT - No Time Off by Flavio Ikoma - NoTimeOff - knife
Intended use: Sports
Type of production: Industrial
Production Lama: China
Blade: Stainless steel CTS BD-1 to 57 / 59HRC
Blade treatment: Satin
Handle: FRN with stainless steel liners
Blade length: 76mm.
Blade thickness: 4mm.
Length closed: 108mm.
Overall length: 184mm.
Thick when closed: -
Balancing: -
Weight: 167g.
Lock: Liner Lock with security system ILS Ikoma Lock Safety
Clips: stainless steel
Sheath: -
Packaging: cardboard box with logos CRKT, Design by Flavio Ikoma, opening system with ball bearing type IKBS opening type Carson FlipperC5350 -
CRKT - Plain Hammond Cruiser - 7904 - knife
Intended Use: Sport / Tactical
Type of production: Industrial
Blade Production: China
Blade: Stainless steel 8Cr14MoV 55 / 57HRC
Blade treatment: -
Handle: Zytel
Blade length: 95mm.
Blade thickness: 3.5mm.
Closed Length: 131mm.
Overall length: 225mm.
Thick when closed: -
Balancing: -
Weight: 173g.
Lock: Liner Lock with secure additional LAWKS
Clip: removable and reversible stainless steel
Sheath: -
Packaging: cardboard box with logos CRKTC7904 -
CRKT - Hammond Cruiser OD Green - 7904DKG - knife
Intended Use: Sport / Tactical
Type of production: Industrial
Production Lama: China
Blade: 8Cr14MoV stainless steel 55/57HRC
Treatment Lama: -
Handle: Zytel
Blade length: 95mm.
Blade thickness: 3.5mm.
Length closed: 131mm.
Total length: 225mm.
Thick when closed: -
Balance: -
Weight: 173g.
Lock: Liner Lock with secure additional LAWKS
Clip: removable and reversible stainless steel
Sheath: -
Packaging: cardboard box with logos CRKTC7904DKG -
Rockstead - SAI Titanium ZDP-189 - knife
Rockstead - SAI Titanium ZDP-189 - knife
Blade: ZDP-189 in 66.8HRC
Handle material: titanium
Blade length: 80 mm.
Blade Thickness: 3.7 mm.
Overall length: 190 mm.
Weight: 140g.
Closure: liner lock
Sheath: Black leather
Notes: Accompanied by a certificate of guarantee with the technical specifications.SAI -
CRKT - Carajas by Ikoma - 5340 - Knife
Intended Use: Sport / EDC
Type of production: Industrial
Production Lama: China
Blade: Sandvik 12C27 stainless steel 59/61 HRC
Treatment Blade: -
Handle: Black G-10
Blade length: 79mm.
Blade thickness: 2.5mm.
Closed Length: 109mm.
Overall length: 187mm.
Thickness when folded: 9mm.
Balancing: -
Weight: 85g.
Lock: Liner Lock
Clip: removable stainless steel
Sheath: -
Packaging: cardboard box with logos CRKT
Notes: Opening system IKBS (Ikoma Korth Bearing System) on ball bearings - Design by Flavio Ikoma10950 -
CRKT - Crawford Kasper Desert Combo - 6783D - knife
Intended Use: Sport / Tactical
Type of production: Industrial
Production Lama: China
Blade: Stainless steel 8Cr14MoV 55 / 57HRC
Treatment Lama: -
Handle: Zytel
Blade length: 95mm. Serration: 35mm.
Blade thickness: 3.5mm.
Closed Length: 135mm.
Overall length: 235mm.
Thick when closed: -
Balancing: -
Weight: 208g.
Lock: Liner Lock with secure additional LAWKS
Clip: Removable stainless steel
Sheath: -
Packaging: cardboard box with logos CRKT11046 -
CRKT - Crawford Kasper - 6773Z - knife
Intended Use: Sport / Tactical
Type of production: Industrial
Production Lama: China
Blade: 8Cr14MoV stainless steel 55/57HRC
Treatment Blade: -
Handle: Zytel
Blade length: 95mm.
Blade thickness: 3.5mm.
Closed Length: 135mm.
Overall length: 235mm.
Thick when closed: -
Balancing: -
Weight: 170g.
Lock: Liner Lock with secure additional LAWKS
Clip: removable stainless steel
Sheath: -
Packaging: cardboard box with logos CRKT10819 -
CRKT - Ryan Seven - 6803ZS - knife
Intended Use: Sport / Tactical
Type of production: Industrial
Production Lama: China
Blade: 8Cr14MoV stainless steel 55/57HRC
Treatment Lama: -
Handle: Zytel
Blade length: 89mm.
Blade thickness: 3.5mm.
Closed Length: 114mm.
Total length: 203mm.
Thick when closed: -
Balance: -
Weight: 161g.
Lock: Liner Lock with secure additional LAWKS
Clip: removable and reversible stainless steel
Sheath: -
Packaging: cardboard box with logos CRKTC6803ZS -
CRKT - Hammond Desert Cruiser - 7914DIN - knife
Intended Use: Sport / Tactical
Type of production: Industrial
Production Lama: China
Blade: 8Cr14MoV stainless steel 55/57HRC
Treatment Lama: -
Handle: Zytel
Blade length: 95mm.
Blade thickness: 3.5mm.
Length closed: 131mm.
Total length: 225mm.
Thick when closed: -
Balance: -
Weight: 173g.
Lock: Liner Lock with secure additional LAWKS
Clip: removable and reversible stainless steel
Sheath: -
Packaging: cardboard box with logos CRKTC7914DI -
Citadel - Stavanger Green Grey Ray Skin - custom knife
WARNING: technical data of the knife are approximate and vary from knife to knife these are handmade products.
Intended Use: collection / sports
Production Type: Handmade
Production Blade: Cambodia
Blade: carbon steel DNH7
Treatment Lama: -
Handle: stingray leather
Blade length: about 50mm.
Blade thickness: approx 4mm.
Closed Length: about 82mm.
Total length: about 145m.
Thick when closed: about 15mm.
Balance: -
Weight: about 78g.
Lock: Liner lock
Clip: -
Sheath: sheath
package:
Notes: -10632 -
CRKT - Drifter Razor-Sharp Edge G10 - 6450K - knife
What makes a good logo knife? It should be affordable, and it should have some large flat areas on the blade or frame suitable for logo imprinting. So we are very happy to present the Drifter series. They're high-quality knives that are priced low enough to purchase in quantity, and all have flat areas that are perfect for our "Company Billboard" imprinting by laser or silk screen. Or you can take any one to your local trophy house for personalized engraving.
The Drifter Stainless is a stainless steel frame-lock folder with a Razor-Sharp edge. The flat titanium nitride-coated frames are ideally suited for imprinting. It also features a 2.875" 8Cr14MoV stainless steel blade with a Razor-Sharp edge and a brushed finish. A stainless steel clip is included.Intended use: Sport
Type of production: Industrial
Production Lama: China
Blade: 8Cr14MoV stainless steel
Treatment Lama: -
Handle material: G10
Blade length: 70mm.
Blade thickness: 2.5mm.
Closed Length: 93mm.
Total length: 163mm.
Thick when closed: 14mm.
Balance: -
Weight: 66g.
Lock: Liner Lock
Clip: removable stainless steel
Sheath: -
Packaging: cardboard box with logos CRKTC6450K -
CRKT - Carson M16-14ZLEK Law Enforcement Zytel Folding Tanto - knife
The CRKT M16-14ZLEK Big Dog Law Enforcement knife is a Kit Carson design that is built for professional use. The black Zytel InterFrame handle has 420J2 stainless steel liners and CRKT's AutoLAWKS knife safety, which automatically actuates when the blade is open making it a virtual fixed blade. First responders will appreciate the integrated tungsten carbide window breaker and seat belt cutter. The pocket clip is 4-way reversible for every possible carry type, but not designed for tip-up in-pocket carry.
The Carson M16-14ZLEK features a black finished Tanto blade with a partially serrated cutting edge. The blade is easily opened with the dual thumb studs or a push of the Carson Flipper, which has an integrated seat belt cutter.
Specifications:
Overall Length: 9.25"
Blade Length: 3.75"
Blade Thickness: .14"
Blade Steel: AUS 8, HRC 55-57
Grind: Hollow
Handle Material: Zytel
Closed Length: 5.5"
Weight: 6.2 oz.
Made in TaiwanCM16-14ZLEK -
CRKT - Carson M16-13ZM Desert Camo - knife
CRKT M16-13 Desert Spear Point Folding Knife M16-13ZM has been developed specifically to blend into the desert environment. This CRKT knife features the super rigid InterFrame build with 420J2 stainless steel liners, threaded stainless steel back spacers, and Desert Camo pattern glass filled nylon scales. The spear point blade of the knife is non-reflective bead-blast finished AUS 4 stainless steel, crafted into a partially serrated combo edge that blends and almost disappears in the desert. The Columbia River M16-13 Desert Combo Edge Folder Knife is ideal when weight and bulk must be kept to a minimum, and it comes with a removable, single position clothing/gear clip for easier carrying. It also features Columbia River Knife & Tool's exclusive patented AutoLAWKS safety, which automatically turns the folder into a fixed blade when the blade is opened and locked. One-hand opening and closing is quick and smooth, the result of precision tolerances and lubrous washers at the blade pivot, and the dual ambidextrous thumb studs with checkered surfaces provide instant access in any circumstance. For a folding blade knife that's at home in the desert, choose the Columbia River Knife & Tool M16-13 Desert Camo Nylon Handle Folding Knife.
Knife Type: Folding Application: Tactical, utility Open Length: 8.25" Closed Length: 4.75" Weight: 3.5 oz Blade Length: 3.5" Blade Thickness: 0.1" Blade Material: AUS 4 stainless steel Blade Hardness: 55-57 HRC Blade Finish: Bead Blast Blade Grind: Hollow Blade Type: Spear point Blade Edge: Combo w/ triple-point serrations Handle Material: Glass-filled nylon Handle Finish: Desert Camo Liner Material: 420J2 Locking Mechanism: Locking liner Safety Mechanism: AutoLAWKS Pocket Clip: Yes, 1-position Additional Features: Carson Flipper M16-13ZM -
CRKT - Carson M21-12G TiNi G10 - knife
Intended Use: Tactical / Sports
Type of production: Industrial
Production Lama: China
Blade: stainless steel 8Cr14, 58-59 HRC
Treatment Blade: Titanium Nitride
Handle material: G10
Blade length: 76mm.
Blade thickness: 3mm.
Closed Length: 108mm.
Total length: 184mm.
Weight: 108g.
Lock: Liner Lock with Auto-closure LAWKS
Clip: removable and reversible stainless steel
Sheath: -
Packaging: cardboard box with logos CRKT
Notes: design by Kit CarsonM21-02GL -
BlackHawk ! Blades - Crucible II Folding Plain - 15C201BK knife
BlackHawk ! Blades - Crucible II Folding Plain - 15C201BK knife
The brand BlackHawk ! Blades was born after the recent acquisition of MOD / Master of Defense by BlackHawk ! - American company leader in tactical gear. The new products keep high quality standards to which MOD we had become accustomed and speak directly to the police and martial artists in fighting techniques with a knife.
Intended Use: Tactical
Type of production : industrial
Blade: AUS-8 stainless steel
Treatment Blade: Teflon
Production Blade: Taiwan
Handle material: 1.5mm stainless steel liners , Cheeks G-10
Blade length : 90mm .
Blade Thickness: 3mm.
Length closed: 119mm .
Total length : 200mm .
Balance: -
Weight: 184g .
Lock: Liner Lock
Clip: Removable , multi-position stainless steel TiNi
Sheath: -
Notes: knife designed by Kelly McCann (aka Jim Grover ), founder of Crucible Security , one of the most important agencies of security services4403 -
BlackHawk! Blades - Garra II - BB10023
Destinazione d'uso: Tattico/CQD
Tipo di produzione: Industriale
Produzione Lama: Taiwan
Lama: Acciaio Inox AUS-8A
Trattamento Lama: Teflonatura
Manicatura: G-10 con liners in acciaio inox
Lunghezza lama: 80mm.
Spessore lama: 3.5mm.
Lunghezza chiuso 115mm.
Lunghezza totale: 185mm.
Spessore da chiuso: 14mm.
Bilanciatura: -
Peso: 128g.
Chiusura: Liner Lock
Clip: Acciaio Inox
Fodero: -
Confezione: Guscio Plastico con loghi BlackHawk! Blades
Note: -4406 -
BlackHawk! Blades - Hornet II Plain Black - 15H201BK
Destinazione d'uso: Tattico
Tipo di produzione: Industriale
Produzione Lama: Taiwan
Lama: In acciaio inox AUS-8 58HRC
Trattamento Lama: Teflonatura
Manicatura: G-10
Lunghezza lama: 78mm.
Spessore lama: 3.5mm.
Lunghezza chiuso: 103mm.
Lunghezza totale: 180mm.
Spessore da chiuso: 18mm.
Bilanciatura: -
Peso: 114g.
Chiusura: Liner Lock
Clip: in acciaio inox
Fodero: -
Confezione: scatola in cartone con loghi BlackHawk!
Note: -4404 -
BlackHawk! Blades - Point Man Plain Black - 15PM01BK coltello
Destinazione d'uso: Tattico
Tipo di produzione: Industriale
Produzione Lama: Taiwan
Lama: In acciaio inox AUS-8 58HRC
Trattamento Lama: Teflonatura
Manicatura: G-10
Lunghezza lama: 85mm.
Spessore lama: 3.5mm.
Lunghezza chiuso: 115mm.
Lunghezza totale: 200mm.
Spessore da chiuso: 20mm.
Bilanciatura: -
Peso: 140g.
Chiusura: Liner Lock
Clip: Acciaio Inox
Fodero: -
Confezione: scatola in cartone con loghi BlackHawk! Blades
Note: -4401 -
Citadel - Fidel Liner Bufalo - 207M - coltello artigianale
ATTENZIONE: i dati tecnici del coltello sono approssimativi e variano da coltello a coltello trattandosi di prodotti artigianali.
Destinazione d'uso: collezione/sportivo
Tipo di produzione: Artigianale
Produzione Lama: Cambogia
Lama: in acciaio al carbonio DNH7
Trattamento Lama: -
Manicatura: Corno di Bufalo D'acqua
Lunghezza lama: circa 78mm.
Spessore lama: circa 3mm.
Lunghezza chiuso: circa 107mm.
Lunghezza totale: circa 188mm.
Spessore da chiuso: circa 15mm.
Bilanciatura: -
Peso: circa 128g.
Chiusura: liner lock
Clip: -
Fodero: in pelle
Confezione: -
Note: -3956 -
Citadel - Folding Kukri Bufalo - 206 - coltello artigianale
Destinazione d'uso: sportivo
Tipo di produzione: Artigianale
Produzione Lama: Cambogia
Lama: in acciaio al carbonio DNH7 a tempra selettiva 40/60HRC
Trattamento Lama: -
Manicatura: Corno di Bufalo D'acqua
Lunghezza lama: 115mm.
Spessore lama: 3.5mm.
Lunghezza chiuso: 142mm.
Lunghezza totale: 250mm.
Spessore da chiuso: 23mm.
Bilanciatura: -
Peso: 250g.
Chiusura: Liner Lock
Clip: -
Fodero: -
Confezione: -
Note: -3954 -
Citadel - Folding Kukri Legno - 206L - coltello artigianale
Destinazione d'uso: sportivo
Tipo di produzione: Artigianale
Produzione Lama: Cambogia
Lama: in acciaio al carbonio DNH7 a tempra selettiva 40/60HRC
Trattamento Lama: -
Manicatura: legno
Lunghezza lama: 115mm.
Spessore lama: 3.5mm.
Lunghezza chiuso: 142mm.
Lunghezza totale: 250mm.
Spessore da chiuso: 23mm.
Bilanciatura: -
Peso: 250g.
Chiusura: Liner Lock
Clip: -
Fodero: -
Confezione: astuccio di cordura con chiusura zip e ricamo con logo Citadel
Note: -3961 -
Citadel - Giaponino Bufalo - 208 - coltello artigianale
ATTENZIONE: i dati tecnici del coltello sono approssimativi e variano da coltello a coltello trattandosi di prodotti artigianali.
Destinazione d'uso: collezione/sportivo
Tipo di produzione: Artigianale
Produzione Lama: Cambogia
Lama: in acciaio al carbonio DNH7
Trattamento Lama: -
Manicatura: Corno di Bufalo D'acqua
Lunghezza lama: circa 58mm.
Spessore lama: circa 3mm.
Lunghezza chiuso: circa 87mm.
Lunghezza totale: circa 147mm.
Spessore da chiuso: circa 14mm.
Bilanciatura: -
Peso: circa 104g.
Chiusura: liner lock
Clip: -
Fodero: in cordura
Confezione: -
Note: -3957 -
CRKT - Carson M16-13 ZLEK - knife
Blade: AUS-8 stainless steel high-carbon Teflon 57/58HRC
Handle: Handle: Zytel
Blade length: 84 mm.
Blade Thickness: 2.5 mm.
Total length: 200 mm.
Weight: 110 g.
Lock: Liner Lock
Clip: Stainless Steel
Notes: Equipped with safety lock and guard LAWKS "Carson Flipper" - glass breakingCM16-13ZLEK -
CRKT - Carson M21-12G TiNi G10 - knife
Intended Use: Tactical / Sports
Type of production: Industrial
Production Lama: China
Blade: stainless steel 8Cr14, 58-59 HRC
Treatment Blade: Titanium Nitride
Handle material: G10
Blade length: 76mm.
Blade thickness: 3mm.
Closed Length: 108mm.
Total length: 184mm.
Weight: 108g.
Lock: Liner Lock with Auto-closure LAWKS
Clip: removable and reversible stainless steel
Sheath: -
Packaging: cardboard box with logos CRKT
Notes: design by Kit CarsonCM21-12G -
CRKT - Carson M21-14SF - Special Forces - coltello
Destinazione d'uso: Tattico/Militare
Lama: in acciaio inox AUS-8 56/58HRC
Produzione Lama Taiwan
Manicatura: Alluminio
Lunghezza lama: 100mm.
Spessore della lama: 3.5mm.
Lunghezza chiuso: 135mm.
Lunghezza totale: 235mm.
Bilanciatura: -
Peso: 155g.
Chiusura: Liner Lock
Clip: amovibile e reversibile in acciaio inox
Fodero: -
Note: design by Carson - Fermo di sicurezza AutoLAWKS3092 -
CRKT - Folding Hissatsu 2903Q - coltello
Destinazione d'uso: Sportivo
Tipo di produzione: Industriale
Produzione Lama: Taiwan
Lama: in acciaio inox AUS-8 56/58HRC
Trattamento Lama: black
Manicatura: Liners in alluminio
Lunghezza lama: 95mm.
Spessore lama: 3mm.
Lunghezza chiuso: 125mm.
Lunghezza totale: 230mm.
Spessore da chiuso: 18mm.
Peso: 174g.
Chiusura: Liner lock con sicura Auto-LAWKS
Clip: in acciaio inox
Confezione: di cartone marrone con loghi CRKT
Note:3140 -
CRKT - Ichi by Koji Hara - 1070 - coltello
Destinazione d'uso: Sportivo
Lama: in acciaio inox 420J2 54/56HRC
Produzione Lama Taiwan
Manicatura: Kraton e Zytel
Lunghezza lama: 65mm.
Spessore della lama: 2mm.
Lunghezza chiuso: 83mm.
Lunghezza totale: 142mm.
Bilanciatura: -
Peso: 54g.
Chiusura: Liner Lock
Clip: amovibile, in acciaio inox
Fodero: -
Note: Apertura servoassistita OutBurst - Design by Koji Hara3089 -
CRKT - Montana Gentleman by Gallagher - 7402SK - coltello
Crkt - Montana Gentleman Grey 7402SK
Da oggi anche voi potrete possedere uno speciale coltello pieghevole di Barry Gallagher, noto e premiato knifemaker per i suoi coltelli costruiti con materiali esotici. Il Montana Gentleman è ispirato ad un suo precedente custom: Damascus Hummingbird già visto sulla rivista Blade.
La struttura InterFrame e il liner lock sono costruiti in acciaio 420J2, mentre la lama è in AUS 8 con un perno di apertura riempito di Kraton.
Acciaio: Aus 8 - 58 HRC
Lunghezza della lama: 65 mm.
Spessore della lama: 2.5 mm.
Lunghezza aperto: 160 mm.
Lunghezza chiuso: 90 mm.
Peso: 72 g.3061 -
CRKT - Wasp by Howard Viele - 8002 - coltello
Coltello da collezione ormai fuori produzione
Destinazione d'uso: Collezione/Sportivo
Lama: in acciaio inox AUS-118
Manicatura: Titanio e Kraton
Lunghezza lama: 77mm.
Spessore della lama: 2.5mm.
Lunghezza chiuso: 110mm.
Lunghezza totale: 185mm.
Bilanciatura: -
Peso: 80g.
Chiusura: Liner Lock
Clip: amovibile in acciaio inox
Fodero: -
Note: Design by Howard Viele0917 -
CRKT - Wild Weasel by Crawford - 1000A - coltello
Destinazione d'uso: Collezione/Sportivo
Lama: in acciaio inox 154CM 58/60HRC made in USA
Manicatura: Alluminio 6061 con liners in acciaio inox 410 ed inserti in Santoprene
Lunghezza lama: 85mm.
Spessore della lama: 2.5mm.
Lunghezza chiuso: 112mm.
Lunghezza totale: 194mm.
Bilanciatura: -
Peso: 114g.
Chiusura: Liner Lock
Clip: Reversibile ed amovibile in acciaio Inox
Fodero: -
Note: Design by Pat & Wes Crawford - Meccanismo di apertura servoassistito Tailwind3081 -
LoneWolf - Black Talon - coltello
Destinazione d'uso: Tattico
Tipo di produzione: industriale
Lama: in acciaio inox CPM-S30V
Trattamento Lama: -
Produzione Lama: USA
Manicatura: nylon
Lunghezza lama: 83mm.
Spessore della lama: 3mm.
Lunghezza chiuso: 80mm
Lunghezza totale: 190mm.
Bilanciatura: -
Peso: 108g.
Chiusura: Liner Lock
Clip: Acciaio Inox
Fodero: -2790 -
LoneWolf - Dark Raven Combo - knife
Intended Use: Tactical
Type of production: industrial
Blade: stainless steel CPM-S30V
Treatment Lama: -
Production Lama USA
Handle material: G10
Blade length: 75mm.
Blade Thickness: 3mm.
Closed Length: 75mm
Total length: 175mm.
Balance: -
Weight: 110g.
Lock: Liner Lock
Clip: Stainless Steel
Sheath: -2791 -
LoneWolf - Loveless Clip Point Folder - knife
LoneWolf - Loveless Clip Point Folder - knife
Intended use: Sport
Type of production: Industrial
Production Blade: Italy
Blade: 154CM stainless steel
Treatment Blade: -
Handle: Micarta
Blade length: 75mm.
Blade thickness: 3mm.
Length closed: -
Overall length: 190mm.
Thick when closed: -
Balancing: -
Weight: 128g.
Lock: Liner Lock
Clip: -
Sheath: Leather
Packaging: cardboard box with logos Lonewolf
Notes: Design by Loveless1309 -
LoneWolf - Loveless Drop Point Folder - coltello
Destinazione d'uso: Sportivo
Tipo di produzione: Industriale
Produzione Lama: Italia
Lama: In acciaio inox 154CM
Trattamento Lama: -
Manicatura: Micarta
Lunghezza lama: 75mm.
Spessore lama: 3mm.
Lunghezza chiuso: -
Lunghezza totale: 190mm.
Spessore da chiuso: -
Bilanciatura: -
Peso: 136g.
Chiusura: Liner Lock
Clip: -
Fodero: in cuoio
Confezione: scatola in cartone con loghi Lonewolf
Note: Design by Loveless1308 -
LoneWolf - Loveless Drop Point Folder - David Yellowhorse Limited Edition
Destinazione d'uso: Sportivo
Tipo di produzione: Impugnatura Artigianale, Lama Industriale
Produzione Lama: Italia by Fantoni
Lama: In acciaio inox 154CM 58HRC
Trattamento Lama: -
Manicatura: Lavorazione artigianale a mosaico, in pietra dura, di David Yellowhorse
Lunghezza lama: 75mm.
Spessore lama: 3mm.
Lunghezza chiuso: -
Lunghezza totale: 190mm.
Spessore da chiuso: -
Bilanciatura: -
Peso: 128g.
Chiusura: Liner Lock
Clip: -
Fodero: in cuoio
Confezione: cofanetto da collezione con loghi Lonewolf, Fantoni e David Yellowhorse; certificati di garanzia
Note: Edizione limitata prodotta in soli 6 esemplari - Design lama by Bob Loveless2795 -
Rockstead - Beetle Clad Steel - coltello
Con il marchio Rockstead, della Ishida Co. di Sakai, in Giappone, sono attualmente commercializzati i migliori coltelli industriali attualmente in produzione.
Creati da Katsumi Kitano, che da oltre 20 anni produce coltelli di qualità tanto da esser stato insignito del massimo riconoscimento tra i coltellinai artigiani in Giappone, si dimostrano eccezionali sia in capacità di taglio, penetrazione e tenuta del filo sia a livello di innovazione per i materiali utilizzati e per le tecniche costruttive.
Lama: Acciaio SanMai CLA189 composto da due guance esterne in ATS-34 a 61.9 HRC e da un tagliente in ZDP189 a 67.2 HRC
Manicatura: Same (vera pelle di razza) e alluminio aeronautico con trattamento black alumite a Hv400
Lunghezza lama: 80 mm.
Spessore della lama: 4 mm.
Lunghezza totale: 190 mm.
Peso: 110 g.
Chiusura: Liner Lock in acciaio 402J2 a 46HRC
Clip: in acciaio 402J2 a 45HRC
Note: Accompagnato da certificato di garanzia con specifiche tecniche.4050 -
Rockstead - Chi HPC - knife
Rockstead - About HPC - knife
With the brand Rockstead, Ishida Co. in Sakai, Japan, are currently marketed the best industrial knives currently in production.
Created by Katsumi Kitano, who for over 20 years has been producing quality knives so as to have been awarded the highest honor among the artisan knife makers in Japan, proved to be exceptional in cutting capacity, penetration and sealing wire is at the level of innovation for materials and construction techniques.
Blade: stainless Hitachi YXR7 to 64.8HRC coverage HPC 3micron - Hv1800
Handle material: Duralumin A2024 with anodized surface to HV400 and skin of Breed
Blade length: 82 mm.
Blade Thickness: 4 mm.
Overall length: 189 mm.
Weight: 100 g.
Lock: Liner Lock 402J2 steel at 52HRC
Clip: 402J2 steel at 48HRC
Notes: Accompanied by a certificate of guarantee with the technical specifications.4067DLC -
Rockstead - Kou-S DLC - coltello
Con il marchio Rockstead, della Ishida Co. di Sakai, in Giappone, sono attualmente commercializzati i migliori coltelli industriali attualmente in produzione.
Creati da Katsumi Kitano, che da oltre 20 anni produce coltelli di qualità tanto da esser stato insignito del massimo riconoscimento tra i coltellinai artigiani in Giappone, si dimostrano eccezionali sia in capacità di taglio, penetrazione e tenuta del filo sia a livello di innovazione per i materiali utilizzati e per le tecniche costruttive.
Lama: acciaio Hitachi YXR7 a 64.7HRC con copertura DLC 3micron - Hv1800
Manicatura: Same (vera pelle di razza) e alluminio aeronautico con trattamento black alumite a Hv400
Lunghezza lama: 82 mm.
Spessore della lama: 3.5 mm.
Lunghezza totale: 182 mm.
Peso: 100 g.
Chiusura: Liner Lock in acciaio 402J2 a 52HRC
Clip: in acciaio 402J2 a 52HRC
Note: Modello numerato e accompagnato da certificato di garanzia con specifiche tecniche.4058 -
Rockstead - Kou-S ZDP-189 - coltello
Con il marchio Rockstead, della Ishida Co. di Sakai, in Giappone, sono attualmente commercializzati i migliori coltelli industriali attualmente in produzione.
Creati da Katsumi Kitano, che da oltre 20 anni produce coltelli di qualità tanto da esser stato insignito del massimo riconoscimento tra i coltellinai artigiani in Giappone, si dimostrano eccezionali sia in capacità di taglio, penetrazione e tenuta del filo sia a livello di innovazione per i materiali utilizzati e per le tecniche costruttive.
Lama: Acciaio inox ZDP189 a 67.1 HRC
Manicatura: Same (vera pelle di razza) e alluminio aeronautico con trattamento black alumite a Hv400
Lunghezza lama: 82 mm.
Spessore della lama: 3.5 mm.
Lunghezza totale: 182 mm.
Peso: 100 g.
Chiusura: Liner Lock in acciaio 402J2 a 52HRC
Clip: in acciaio 402J2 a 52HRC
Note: Accompagnato da certificato di garanzia con specifiche tecniche.4057 -
Rockstead - Shin-A Wind Ripple HPC Limited Edition - coltello
Con il marchio Rockstead, della Ishida Co. di Sakai in Giappone, vengono commercializzati i migliori coltelli industriali attualmente reperibili sul mercato.
Punti di forza di questi coltelli sono l'assoluta precisione delle lavorazioni a controllo numerico, l'utilizzo di acciai tecnologicamente avanzati, le elevatissime durezze delle lame che garantiscono incredibili capacità di taglio, penetrazione e tenuta del filo ed i meccanismi di apertura e chisura che sanno garantire la massima sicurezza senza rinunciare al comfort ed alla fluidità d'uso.
Lama: Acciaio al carbonio YXR-7con tagliente a 65.1 HRC e trattamento superficiale HPC
Manicatura: Alluminio aeronautico A6063S con trattamento black alumite a Hv400
Lunghezza lama: 88 mm.
Spessore della lama: 4 mm.
Lunghezza totale: 210 mm.
Peso: 154 g.
Chiusura: Liner Lock in acciaio 402J2 a 50HRC
Clip: in acciaio 402J2 a 50HRC
Note: Esemplare in edizione limitata, realizzato per lo show Arms & Hunting 2011 tenutosi dal 13 al 16 ottobre a Mosca, Russia. Accompagnato da certificato di garanzia con specifiche tecniche.4072