Knives, collection knife, tactical knives, outdoor knives, pocket knives and tools
-
EnZo - Birk 75 Knife - Flat Plain CPMS30V - Black G10 - 2602 - knife
Intended Use: Hunting/Sporting
Production type: Industrial
Country of Production: Finland
Blade: stainless steel CPM-S30V
Blade finish: satin finish
Handle: G10 Black
Blade length: 75mm.
Blade thickness: 2.5mm.
Length closed: 103mm.
Total length: 178mm.
Thickness when closed: 7mm.
Weight: 100g.
Closure: Liner Lock
Clip: Stainless Steel
Packaging: cardboard box with Enzo Knives logos
Notes: -EN-2602 -
Rockstead - Shin - Clad ZDP189 & Aluminum and Samekawa - folding knife
With Rockstead brand of Ishida Co. Sakai, Japan, they are currently marketed with the best industrial knives currently in production.
Created by Katsumi Kitano, who for 20 years has been producing quality knives so much to have been awarded the highest award among the knife craftsmen in Japan, you demonstrate exceptional both in cutting capacity, penetration and tightness of the wire both in terms of innovation for and materials used for the construction techniques.
Blade: ZDP189 rolled stainless steel at 66.6 HRC inside and VG10 at 60.8 HRC outside
Handle: Same (real ray skin) and aircraft aluminum with black alumite treatment to HV400
Blade length: 95 mm.
Blade thickness: 4 mm.
Overall length: 210 mm.
Weight: 145 g.
Lock: Liner Lock steel in 52HRC 402J2
Clip: Steel 402J2 to 52HRC
Notes: Accompanied by a certificate of guarantee with the technical specifications.RO-SHIN-ZDP -
Rockstead - 2010 Higo-MH-DLC Serial #303 - YXR7 HPC & Micarta - PRIVATE COLLECTION - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: In very good condition
* Commercially available Discontinued
* Sharpening: Factory
* Marks on blade: -
* Marks on handle: - -
* Box: marketed in silk pouch.
* Scabbard: Leather, belt, original, with a few small marks given by time.
* Manuals, Certificates and Warranties: present.
* Checked and Certified by our in-house laboratory
The HIGO-MH-DLC folder features a 3.5-inch YXR7 blade with DLC coating and Micarta handle. The incredible mirror finish is achieved by heat treating the blade and gradually grinding by hand with wet and dry sandpaper of 400, 600, 800, 1,200 and 2,000. The HIGO-MH-DLC comes with a black leather belt case with a slot to hold the included torx wrench.
Country of manufacture: Japan
Type of manufacture: midtech
Blade: DLT571 steel (Hitachi YXR7 at 64.1HRC with 3micron HPC coating and hardness of Hv1300)
Handle: 2mm stainless steel sus402J2 at 52HRC with micarta handles
Blade length: 90mm.
Blade thickness: 3.5mm.
Total length: 216mm.
Weight: 139g.
Closure: Liner Lock
Clip: stainless steel
Notes: Serial number 303 - 2010 knife accompanied by warranty certificate with technical specifications - Model discontinued and no longer commercially availableRO-HIMHDLC-CP -
Rockstead - CHI ZDP - Shinogi Zukuri Clad Steel SanMai ZDP189 - knife made in Japan
Under the brand name Rockstead, from Ishida Co. in Sakai, Japan, the best industrial knives currently in production are currently marketed: created by Katsumi Kitano, who has been making quality knives for over 30 years to the extent that he has been awarded the highest distinction among artisan knife makers in Japan, they prove to be exceptional both in cutting ability, penetration and edge-holding and in innovation in the materials used and construction techniques.
Intended Use: Collection/Sportsman
Type of production: Midtech
Country of manufacture: Sakai - Japan
Blade: rolled stainless steel ZDP189 at 66.4 HRC on the inside and VG10 at 61.3 HRC on the outer cheeks
Blade treatment: mirror polish
Handle: Aluminum A6063S with anodization to Hv400 hardness and genuine Breed leather inserts
Blade length: 82mm.
Blade thickness: 3.7mm.
Length closed: 111mm.
Total length: 189mm.
Thickness when closed: 16.2mm.
Weight: 133g.
Opening: via ambidextrous pin
Washers: steel
Closure: Sub FrameLock of 2mm. made of SUS402J2 stainless steel at 50HRC
Clip: deep pocket, 1mm. 420J2 stainless steel with PVD treatment
Packaging: Wooden box with Rockstead logos, certificate with serial number and steel hardness test
Notes: Shinogi Zukuri type blade sharpeningR-CHIZDP -
E.G. Custom - Hunting knife - horn and briar handle - entirely handmade
handcrafted knife entirely handmade with grinding wheel and file. The blade is made of ledeburitic steel with 2.3% carbon obtained by powder metallurgy and reaches a hardness of 64 HRC. Perfect for hunting and outdoor use.
Intended use: collection / hunting
Type of production: custom
Production Lama: USA
Blade: 64HRC powder steel
Blade treatment: -
Handle: in deer horn and tuya burl with brass guard
Blade length: 100mm.
Blade thickness: 5mm.
Total length: 240mm.
Weight: 172g.
Sheath: in brown leather sewn and handmade
Notes: knife made in Italy in the late 90s - certificate of the craftsmanCUS-1€0.00Only -20 leftOut of stock -
Bob Dozier - Dagger Liner Lock Folder D2 Steel - Titanium - custom knife
Rare knife handcrafted by Bob Dozier in 2001, made of D2 steel with sandblasted titanium handle and anodized details.
Intended use: Collection
Type of production: handmade
Country of production: USA
Blade: in D2 steel at 61HRC
Blade treatment: satin finish
Handle: in titanium with anodized details
Blade length: 105mm.
Blade thickness: 4mm.
Closed length: 135mm.
Total length: 250mm.
Weight: 170g.
Closure: Liner Lock
Clip: titanium, removable
Notes: made entirely by hand by Bob Dozier in 2001Dozier-SP€0.00Only -20 leftOut of stock -
Rockstead - Shin knife DLC - YXR7 - knife
This knife blade is convex on both sides in the tradition of the highly praised Japanese sword. This shape is both sharp and strong, and can still slice cleanly through a sheet of paper even after the punishment of chopping and cutting through dried bamboo. Using this special blade shape is an excellent way of allowing an edge to be thick without sacrificing any of its sharpness. This knife is of preeminent sharpness. This is a durable knife with strong cutting capabilities that will last for a long time. Even when used for rigorous cutting, the blade will not bite or catch thanks to its convex shape. Other knives will often bite or catch, and may acquire nicks if pulled out suddenly.
Blade: XR-7 steel at 64.3 HRC with DLC treatment
Handle: Same (real breed leather) and aeronautical aluminum with Hv400 black alumite treatment
Blade length: 95 mm.
Blade thickness: 4 mm.
Total length: 210 mm.
Weight: 145 g.
Closing: Liner Lock in 402J2 steel at 52HRC
Clip: in 402J2 steel at 52HRC
Notes: Accompanied by a warranty certificate with technical specifications.RS-SHIN-B -
EnZo - Birk 75 knife - D2 - Curly Birch - 2530 - knife
Intended use: Hunting / Sports
Type of production: Semi-Industrial
Lama production: Finland
Blade: in steel D2
Blade treatment: -
Handle: birch root
Blade length: 75mm.
Blade thickness: 3mm.
Length closed: 103mm.
Total length: 178mm.
Thick when closed: 7mm.
Balancing: -
Weight: 100g.
Closure: Liner Lock
Clip: Stainless Steel
Sheath: -
Packaging: Cardboard box with EnZo logos
Notes: Scandi type sharpeningEN-2530 -
Rockstead - TEI DLC - 65hrc - knife collection
This knife can still slice paper even after the punishment of striking and cutting dried bamboo.This knife has a beautiful convex surface with extreme sharpness.This is a flagship of the ROCKSTEAD folding knife collection. Both sides of the blade are convex. The blade is in the shape of the traditional Japanese sword. It cuts well and is strong. You can enjoy its strong cutting capabilities for a long time.
Full length: 213.00 mm
Blade length: 93.00 mm
Weight: 155 g
Thickness: 3.70 mm
Material: YXR7
Hardness: HRC65
Blade geometry: Honzukuri
Hard coating: DLC
Knives type: FolderRO-TEI -
Bob Dozier - DH-FH - Black and Burgundy Micarta - handmade knife
Intended use: Sports / Collection
Type of production: handmade
Country of Origin: USA
Blade: D2 steel 61HRC
Blade treatment: satin finish
Handle: Micarta black and burgundy, folders and spacers Titanium
Blade length: 102mm.
Blade Thickness: 3.5mm.
Closed Length: 133mm.
Overall length: 234mm.
Weight: 212g.
Lock: Liner Lock
Clip: -
Notes: made entirely by hand by Bob Dozier in 201312521€696.72Out of stock -
Max Salice Sanna - Wave - Steel SPG2 sanmai - craft knife
Craft knife produced by the famous Master cutler Italian Salice Max Sanna.
This model called Wave, uses the Japanese steel sintered SPG2 damask laminated to 69 layers.
Intended Use: Collection / Gentleman
Type of production: Artisan
Production Lama: Italy
Blade: Stainless sintered SPG2 in DAMACO rolled 61/62 HRC
Blade treatment: -
Handle: Canvas Micarta
Blade length: 73mm.
Blade thickness: 3mm.
Closed Length: 90mm.
Overall length: 170mm.
Thick when closed: 15mm.
Balancing: -
Weight: 92g.
Lock: Liner Lock
Clip: -
Sheath: Leather
Notes: ONE PIECE - knife custom crafted by MaxFor more information you can view the site sull'accaio used: www.collinisteel.com
max-wave€0.00Only -50 leftOut of stock -
Rockstead - SAI Titanium ZDP-189 - knife
Rockstead - SAI Titanium ZDP-189 - knife
Blade: ZDP-189 in 66.8HRC
Handle material: titanium
Blade length: 80 mm.
Blade Thickness: 3.7 mm.
Overall length: 190 mm.
Weight: 140g.
Closure: liner lock
Sheath: Black leather
Notes: Accompanied by a certificate of guarantee with the technical specifications.SAI -
EnZo - Birk 75 - CPMS30W - Carbon Fiber - 2701 - knife
EnZo - Birk 75 - CPMS30W - Carbon Fiber - 2701 - knife
Intended use: Hunting / Sporting
Production Type: Semi-Industrial
Production Blade: Finland
Blade: Stainless CPMS30W
Treatment Blade: -
Handle material: carbon fiber
Blade length: 75mm.
Blade thickness: 2.5mm.
Closed Length: 103mm.
Overall length: 178mm.
Thickness when folded: 7mm.
Balancing: -
Weight: 102g.
Lock: Liner Lock
Clip: Stainless Steel
Sheath: -
Packaging: Cardboard box with logos EnZo
Notes: Sharpening type Scandi
Notes: Collini Cutlery is the distributor for Italy Enzo knivesENZO2701 -
Max Salice Sanna - Goblin - Red Stamina - custom knife
Intended use: Collection / Gentleman
Type of production: Industrial
Production Blade: Italy
Blade: Stainless steel ATS34
Treatment Lama: -
Handle: Red Stamina
Blade length: 67mm.
Blade thickness: 3mm.
Closed Length: 90mm.
Total length: 154mm.
Thick when closed: 13mm.
Balance: -
Weight: 55g.
Lock: Liner Lock
Clip: -
Sheath: Leather
Notes: ONE PIECE - handmade custom knife by Maxmax€0.00Only -99 leftOut of stock -
Bob Dozier - DH-SK - Westinghouse White Paper Micarta with Red Lines - handmade knife
Intended use: Sports / Collection
Type of production: handmade
Country of Origin: USA
Blade: D2 steel 61HRC
Blade treatment: satin finish
Handle: White Westinghouse Micarta with red lines, folders and spacers Titanium
Blade length: 77mm.
Blade thickness: 3.5mm.
Closed Length: 100mm.
Overall length: 178mm.
Weight: 102g.
Lock: Liner Lock
Clip: titanium, removable
Notes: totally handmade by Bob Dozier in 201112520€573.77Out of stock -
EnZo - Birk 75 - CPM-S30V Flat - Carbon Fiber - 2601 - coltello
Destinazione d'uso: Caccia/Sportivo
Tipo di produzione: Semi-Industriale
Produzione Lama: Finlandia
Lama: in acciaio inox CPM-S30V
Trattamento Lama: -
Manicatura: fibra di carbonio
Lunghezza lama: 75mm.
Spessore lama: 2.5mm.
Lunghezza chiuso: 103mm.
Lunghezza totale: 178mm.
Spessore da chiuso: 7mm.
Bilanciatura: -
Peso: 94g.
Chiusura: Liner Lock
Clip: Acciaio Inox
Fodero: -
Confezione: Scatola di cartone con loghi EnZo
Note: Affilatura di tipo Flat
Note:la Coltelleria Collini è distributore per l'Italia dei coltelli Enzo7373C -
EnZo - Birk 75 - CPM-S30V Flat - Carbon Fiber Bolsters - 2601 - coltello
Destinazione d'uso: Caccia/Sportivo
Tipo di produzione: Semi-Industriale
Produzione Lama: Finlandia
Lama: in acciaio inox CPM-S30V
Trattamento Lama: -
Manicatura: fibra di carbonio ed acciaio inox
Lunghezza lama: 75mm.
Spessore lama: 2.5mm.
Lunghezza chiuso: 103mm.
Lunghezza totale: 178mm.
Spessore da chiuso: 7mm.
Bilanciatura: -
Peso: 104g.
Chiusura: Liner Lock
Clip: Acciaio Inox
Fodero: -
Confezione: Scatola di cartone con loghi EnZo
Note: Affilatura di tipo Flat
Note: la Coltelleria Collini è distributore per l'Italia dei coltelli Enzo7373CT -
EnZo - Birk 75 - D2 - Carbon Fiber - 2501 - coltello
Destinazione d'uso: Caccia/Sportivo
Tipo di produzione: Semi-Industriale
Produzione Lama: Finlandia
Lama: in acciaio D2
Trattamento Lama: -
Manicatura: fibra di carbonio
Lunghezza lama: 75mm.
Spessore lama: 2.5mm.
Lunghezza chiuso: 103mm.
Lunghezza totale: 178mm.
Spessore da chiuso: 7mm.
Bilanciatura: -
Peso: 102g.
Chiusura: Liner Lock
Clip: Acciaio Inox
Fodero: -
Confezione: Scatola di cartone con loghi EnZo
Note: Affilatura di tipo Scandi
Note: la Coltelleria Collini è distributore per l'Italia dei coltelli Enzo7370C -
EnZo - Birk 75 - D2 - Holm Oak - 2503 - coltello
Destinazione d'uso: Caccia/Sportivo
Tipo di produzione: Semi-Industriale
Produzione Lama: Finlandia
Lama: in acciaio D2
Trattamento Lama: -
Manicatura: legno di olmo
Lunghezza lama: 75mm.
Spessore lama: 2.5mm.
Lunghezza chiuso: 103mm.
Lunghezza totale: 178mm.
Spessore da chiuso: 7mm.
Bilanciatura: -
Peso: 102g.
Chiusura: Liner Lock
Clip: Acciaio Inox
Fodero: -
Confezione: Scatola di cartone con loghi EnZo
Note: Affilatura di tipo Scandi
Note: la Coltelleria Collini è distributore per l'Italia dei coltelli Enzo7370O -
EnZo - Birk 75 - Scandi Plain D2- Birch Burl - 2602 - knife
Intended Use: Hunting/Sporting
Production type: Industrial
Country of Production: Finland
Blade: D2 steel
Blade finish: Satin finish
Handle: birch briar
Blade length: 75mm.
Blade thickness: 2.5mm.
Length closed: 103mm.
Total length: 178mm.
Thickness when closed: 7mm.
Weight: 102g.
Closure: Liner Lock
Clip: Stainless steel
Packaging: Cardboard box with EnZo logos
Notes: Scandi type sharpeningEN-2502 -
LoneWolf - Black Talon - coltello
Destinazione d'uso: Tattico
Tipo di produzione: industriale
Lama: in acciaio inox CPM-S30V
Trattamento Lama: -
Produzione Lama: USA
Manicatura: nylon
Lunghezza lama: 83mm.
Spessore della lama: 3mm.
Lunghezza chiuso: 80mm
Lunghezza totale: 190mm.
Bilanciatura: -
Peso: 108g.
Chiusura: Liner Lock
Clip: Acciaio Inox
Fodero: -2790 -
LoneWolf - Dark Raven Combo - knife
Intended Use: Tactical
Type of production: industrial
Blade: stainless steel CPM-S30V
Treatment Lama: -
Production Lama USA
Handle material: G10
Blade length: 75mm.
Blade Thickness: 3mm.
Closed Length: 75mm
Total length: 175mm.
Balance: -
Weight: 110g.
Lock: Liner Lock
Clip: Stainless Steel
Sheath: -2791 -
LoneWolf - Loveless Clip Point Folder - knife
LoneWolf - Loveless Clip Point Folder - knife
Intended use: Sport
Type of production: Industrial
Production Blade: Italy
Blade: 154CM stainless steel
Treatment Blade: -
Handle: Micarta
Blade length: 75mm.
Blade thickness: 3mm.
Length closed: -
Overall length: 190mm.
Thick when closed: -
Balancing: -
Weight: 128g.
Lock: Liner Lock
Clip: -
Sheath: Leather
Packaging: cardboard box with logos Lonewolf
Notes: Design by Loveless1309 -
LoneWolf - Loveless Drop Point Folder - coltello
Destinazione d'uso: Sportivo
Tipo di produzione: Industriale
Produzione Lama: Italia
Lama: In acciaio inox 154CM
Trattamento Lama: -
Manicatura: Micarta
Lunghezza lama: 75mm.
Spessore lama: 3mm.
Lunghezza chiuso: -
Lunghezza totale: 190mm.
Spessore da chiuso: -
Bilanciatura: -
Peso: 136g.
Chiusura: Liner Lock
Clip: -
Fodero: in cuoio
Confezione: scatola in cartone con loghi Lonewolf
Note: Design by Loveless1308 -
LoneWolf - Loveless Drop Point Folder - David Yellowhorse Limited Edition
Destinazione d'uso: Sportivo
Tipo di produzione: Impugnatura Artigianale, Lama Industriale
Produzione Lama: Italia by Fantoni
Lama: In acciaio inox 154CM 58HRC
Trattamento Lama: -
Manicatura: Lavorazione artigianale a mosaico, in pietra dura, di David Yellowhorse
Lunghezza lama: 75mm.
Spessore lama: 3mm.
Lunghezza chiuso: -
Lunghezza totale: 190mm.
Spessore da chiuso: -
Bilanciatura: -
Peso: 128g.
Chiusura: Liner Lock
Clip: -
Fodero: in cuoio
Confezione: cofanetto da collezione con loghi Lonewolf, Fantoni e David Yellowhorse; certificati di garanzia
Note: Edizione limitata prodotta in soli 6 esemplari - Design lama by Bob Loveless2795 -
Rockstead - Beetle Clad Steel - coltello
Con il marchio Rockstead, della Ishida Co. di Sakai, in Giappone, sono attualmente commercializzati i migliori coltelli industriali attualmente in produzione.
Creati da Katsumi Kitano, che da oltre 20 anni produce coltelli di qualità tanto da esser stato insignito del massimo riconoscimento tra i coltellinai artigiani in Giappone, si dimostrano eccezionali sia in capacità di taglio, penetrazione e tenuta del filo sia a livello di innovazione per i materiali utilizzati e per le tecniche costruttive.
Lama: Acciaio SanMai CLA189 composto da due guance esterne in ATS-34 a 61.9 HRC e da un tagliente in ZDP189 a 67.2 HRC
Manicatura: Same (vera pelle di razza) e alluminio aeronautico con trattamento black alumite a Hv400
Lunghezza lama: 80 mm.
Spessore della lama: 4 mm.
Lunghezza totale: 190 mm.
Peso: 110 g.
Chiusura: Liner Lock in acciaio 402J2 a 46HRC
Clip: in acciaio 402J2 a 45HRC
Note: Accompagnato da certificato di garanzia con specifiche tecniche.4050 -
Rockstead - Chi HPC - knife
Rockstead - About HPC - knife
With the brand Rockstead, Ishida Co. in Sakai, Japan, are currently marketed the best industrial knives currently in production.
Created by Katsumi Kitano, who for over 20 years has been producing quality knives so as to have been awarded the highest honor among the artisan knife makers in Japan, proved to be exceptional in cutting capacity, penetration and sealing wire is at the level of innovation for materials and construction techniques.
Blade: stainless Hitachi YXR7 to 64.8HRC coverage HPC 3micron - Hv1800
Handle material: Duralumin A2024 with anodized surface to HV400 and skin of Breed
Blade length: 82 mm.
Blade Thickness: 4 mm.
Overall length: 189 mm.
Weight: 100 g.
Lock: Liner Lock 402J2 steel at 52HRC
Clip: 402J2 steel at 48HRC
Notes: Accompanied by a certificate of guarantee with the technical specifications.4067DLC -
Rockstead - Kou-S DLC - coltello
Con il marchio Rockstead, della Ishida Co. di Sakai, in Giappone, sono attualmente commercializzati i migliori coltelli industriali attualmente in produzione.
Creati da Katsumi Kitano, che da oltre 20 anni produce coltelli di qualità tanto da esser stato insignito del massimo riconoscimento tra i coltellinai artigiani in Giappone, si dimostrano eccezionali sia in capacità di taglio, penetrazione e tenuta del filo sia a livello di innovazione per i materiali utilizzati e per le tecniche costruttive.
Lama: acciaio Hitachi YXR7 a 64.7HRC con copertura DLC 3micron - Hv1800
Manicatura: Same (vera pelle di razza) e alluminio aeronautico con trattamento black alumite a Hv400
Lunghezza lama: 82 mm.
Spessore della lama: 3.5 mm.
Lunghezza totale: 182 mm.
Peso: 100 g.
Chiusura: Liner Lock in acciaio 402J2 a 52HRC
Clip: in acciaio 402J2 a 52HRC
Note: Modello numerato e accompagnato da certificato di garanzia con specifiche tecniche.4058 -
Rockstead - Kou-S ZDP-189 - coltello
Con il marchio Rockstead, della Ishida Co. di Sakai, in Giappone, sono attualmente commercializzati i migliori coltelli industriali attualmente in produzione.
Creati da Katsumi Kitano, che da oltre 20 anni produce coltelli di qualità tanto da esser stato insignito del massimo riconoscimento tra i coltellinai artigiani in Giappone, si dimostrano eccezionali sia in capacità di taglio, penetrazione e tenuta del filo sia a livello di innovazione per i materiali utilizzati e per le tecniche costruttive.
Lama: Acciaio inox ZDP189 a 67.1 HRC
Manicatura: Same (vera pelle di razza) e alluminio aeronautico con trattamento black alumite a Hv400
Lunghezza lama: 82 mm.
Spessore della lama: 3.5 mm.
Lunghezza totale: 182 mm.
Peso: 100 g.
Chiusura: Liner Lock in acciaio 402J2 a 52HRC
Clip: in acciaio 402J2 a 52HRC
Note: Accompagnato da certificato di garanzia con specifiche tecniche.4057 -
Rockstead - Shin-A Wind Ripple HPC Limited Edition - coltello
Con il marchio Rockstead, della Ishida Co. di Sakai in Giappone, vengono commercializzati i migliori coltelli industriali attualmente reperibili sul mercato.
Punti di forza di questi coltelli sono l'assoluta precisione delle lavorazioni a controllo numerico, l'utilizzo di acciai tecnologicamente avanzati, le elevatissime durezze delle lame che garantiscono incredibili capacità di taglio, penetrazione e tenuta del filo ed i meccanismi di apertura e chisura che sanno garantire la massima sicurezza senza rinunciare al comfort ed alla fluidità d'uso.
Lama: Acciaio al carbonio YXR-7con tagliente a 65.1 HRC e trattamento superficiale HPC
Manicatura: Alluminio aeronautico A6063S con trattamento black alumite a Hv400
Lunghezza lama: 88 mm.
Spessore della lama: 4 mm.
Lunghezza totale: 210 mm.
Peso: 154 g.
Chiusura: Liner Lock in acciaio 402J2 a 50HRC
Clip: in acciaio 402J2 a 50HRC
Note: Esemplare in edizione limitata, realizzato per lo show Arms & Hunting 2011 tenutosi dal 13 al 16 ottobre a Mosca, Russia. Accompagnato da certificato di garanzia con specifiche tecniche.4072