Knives, collection knife, tactical knives, outdoor knives, pocket knives and tools

Intended Use: Sporting / Tactical

Production type: Industrial
Country of Production: Italy
Blade: Stainless steel N690 59/60HRC
Blade finish: Acid Stonewashed
Handle: FRN
Blade Length: 97mm.
Blade thickness: 4mm.
Length closed: 103m.
Total length: 190mm.
Thickness when closed: 18mm.
Weight: 135g.
Closure: Liner Lock
Clip: removable and reversible, stainless steel
Packaging: Cardboard box with Fox Knives logos 
Notes: Flipper-type opening on ball bearings - Design by Jesper Voxnaes - Acid etching on the blade restores an already "worn" aesthetic appearance and each individual knife may have different finishes/colors/shades than the product in the pictures.

With Rockstead brand of Ishida Co. Sakai, Japan, they are currently marketed with the best industrial knives currently in production.

Created by Katsumi Kitano, who for 20 years has been producing quality knives so much to have been awarded the highest award among the knife craftsmen in Japan, you demonstrate exceptional both in cutting capacity, penetration and tightness of the wire both in terms of innovation for and materials used for the construction techniques.

Blade: ZDP189 rolled stainless steel at 66.6 HRC inside and VG10 at 60.8 HRC outside
Handle: Same (real ray skin) and aircraft aluminum with black alumite treatment to HV400
Blade length: 95 mm.
Blade thickness: 4 mm.
Overall length: 210 mm.
Weight: 145 g.
Lock: Liner Lock steel in 52HRC 402J2
Clip: Steel 402J2 to 52HRC
Notes: Accompanied by a certificate of guarantee with the technical specifications.

Under the brand name Rockstead, from Ishida Co. in Sakai, Japan, the best industrial knives currently in production are currently marketed: created by Katsumi Kitano, who has been making quality knives for over 30 years to the extent that he has been awarded the highest distinction among artisan knife makers in Japan, they prove to be exceptional both in cutting ability, penetration and edge-holding and in innovation in the materials used and construction techniques.

Intended Use: Collection/Sportsman

Type of production: Midtech
Country of manufacture: Sakai - Japan
Blade: rolled stainless steel ZDP189 at 66.4 HRC on the inside and VG10 at 61.3 HRC on the outer cheeks
Blade treatment: mirror polish
Handle: Aluminum A6063S with anodization to Hv400 hardness and genuine Breed leather inserts
Blade length: 82mm.
Blade thickness: 3.7mm.
Length closed: 111mm.
Total length: 189mm.
Thickness when closed: 16.2mm.
Weight: 133g.
Opening: via ambidextrous pin
Washers: steel
Closure: Sub FrameLock of 2mm. made of SUS402J2 stainless steel at 50HRC
Clip: deep pocket, 1mm. 420J2 stainless steel with PVD treatment
Packaging: Wooden box with Rockstead logos, certificate with serial number and steel hardness test
Notes: Shinogi Zukuri type blade sharpening

Intended Use: Sporting / Tactical

Production type: Industrial
Country of Production: Italy
Blade: Stainless steel N690 59/60HRC
Blade finish: Acid Stonewashed
Handle: FRN
Blade Length: 97mm.
Blade thickness: 4mm.
Length closed: 103m.
Total length: 190mm.
Thickness when closed: 18mm.
Weight: 135g.
Closure: Liner Lock
Clip: removable and reversible, stainless steel
Packaging: Cardboard box with Fox Knives logos 
Notes: Flipper-type opening on ball bearings - Design by Jesper Voxnaes - Acid etching on the blade restores an already "worn" aesthetic appearance and each individual knife may have different finishes/colors/shades than the product in the pictures.

Intended Use: Sporting

Type of production: Industrial
Country of Production:Italy
Blade:Stainless steel Elmax 59/60HRC
Blade finish: Acid Stonewashed
Handle: Micarta
Blade Length: 75mm.
Blade thickness: 4mm.
Length closed: 103m.
Total length: 188mm.
Thickness when closed: 18mm
Weight: 140g.
Closure: Liner Lock
Clip: removable and reversible, stainless steel
Packaging: Cardboard box with Fox Knives logos, zippered pouch
Notes: Flipper-type opening on ball bearings - Design by Jesper Voxnaes

Intended use: sporting/collection

Type of production: Industrial
Country of Production: Italy
Blade: stainless steel damsco Damasteel DS93X Gysinge 62/64HRC
Blade finish: -
Handle: Stonewashed PVD titanium
Blade length: 70mm.
Blade thickness: 3mm.
Length closed: 102m.
Total length: 180mm.
Sleeve thickness: 12mm.
Weight: 105g.
Locking mechanism: Liner Lock
Clip: removable and reversible, purple oxidized titanium
Packaging: Cardboard box with Fox Knives logos
Notes: Design by Riccardo Gobbato

Intended use: Mushroom knife

Blade: 12C27 stainless steel
Handle: Eucalyptus wood
Blade length: 65mm.
Blade thickness: 3mm.
Closed length: 110mm.
Total length: 175mm.
Balancing: -
Weight: 98g.
Closure: Liner Lock
Clip: in stainless steel
Sheath: -
Notes: Resealable Nylon Brush - Design by Riccardo Gobbato

Intended Use: Sporting / Tactical

Production type: Industrial
Country of Production: Italy
Blade: Steel D2 59/61HRC
Blade finish: Stonewashed
Handle: Micarta with bronze anodized aluminum spacer
Blade length: 95mm.
Blade thickness: 4mm.
Length closed: 132m.
Total length: 227mm.
Thickness when closed: 14mm
Weight: 165g.
Closure: Liner Lock
Clip: removable, in stainless steel AISI 420J2B
Sheath: leather, felt and nylon pouch, with zipper
Package: Cardboard box with Fox Knives logos 
Notes: Design by Gudy Van Poppel - Opening movement on ball bearings - Carson Flipper opening system

With this exclusive edition of Coltelleria Collini in collaboration with Fox we have chosen to combine the pocket knife Baby Core by Vox with a Japanese powder steel (sintered) and rolled steel (SanMai) by Takefu Steel.

For this project we have chosen to use the Super Gold2 (SPG2) steel at 62/63HRC for the cutting edge of the blade in order to ensure exceptional cutting performance and durability of the sharpening, while ensuring a remarkable resilience and resistance to oxidation given by the lamination process of the blade.

Intended Use: Sporting / Collection

Production type: Industrial
Country of Production: Italy
Blade: Rolled Japanese stainless steel (San Mai) with sintered cutting edge in SPG2 at 62/63HRC
Blade Finish: Satin
Handle: FRN (Fiberglass Reinforced Nylon) with stainless steel liners
Blade length: 65mm.
Blade thickness: 3mm.
Length closed: 85m.
Total length: 144mm.
Thickness when closed: 14mm
Weight: 79g.
Closure: Liner Lock in AISI 420 stainless steel
Clip: flush, AISI 302 stainless steel, removable and reversible
Packaging: Cardboard box with Fox Knives logos
Notes: Design by Jesper Voxnaes - Opening movement on ball bearings - Carson Flipper opening system - Exclusive version by Coltelleria Collini, Sprint Run, with Japanese Takefu Steel SPG2 Rolled Stainless Steel.

The rolled steel - imported in Italy by Collini Steel directly from the Japanese Takefu Steel - is based on the ancient Japanese tradition in the creation of the famous Samurai swords. As early as 1100, expert Japanese blacksmiths combined different materials to give Katana swords incredible cutting capabilities combined with previously unknown strength and flexibility. It is thanks to this revolutionary construction technique that the Samurai swords have been preserved until our days becoming one of the most fascinating objects made by man. Following this tradition applied to modern metallurgy, we are now able to have technologically advanced steels already tested and used in cutlery by famous brands such as Fallkniven, Cold Steel, Mcusta, Kai, Sog, Zwilling, Rockstead, etc.

- Longer cutting edge life
thanks to the use of high quality steels with high carbon content (VG10, CoS, Shiro) or sintered (SPG2), in the core steel, the blade, once hardened, reaches hardness and cutting performances definitely higher than those reached with the use of traditional steels.

- Greater resilience
Built on the principle of Japanese swords, the multilayer steel is difficult to break thanks to the toughness of the central steel (Core Steel) and the elasticity of the steel used for the lateral coating (Stainless Steel).

- Improved corrosion resistance
The steel used for the outer layers (Stainless Steel) gives the blade a high resistance to corrosion. The combination of the two or more materials used by Takefu Steel generates, at a galvanic level, a structure that improves corrosion resistance even on the edge.

- Easy machining even after heat treatment
Although steel normally becomes harder after hardening, the lateral steel used in multilayer machining does not lose its softness and allows easy machining, drilling or welding even after heat treatment. For optimum blade performance, cryogenic treatment is recommended.

- Improved aesthetic performance
Knives made of multi-state steel or damask pattern at the end of the processing are aesthetically elegant, refined and highly appreciated by collectors all over the world.

With this exclusive edition of Coltelleria Collini in collaboration with Fox we have chosen to combine the pocket knife Baby Core by Vox with a Japanese powder steel (sintered) and rolled steel (SanMai) by Takefu Steel.

For this project we have chosen to use the Super Gold2 (SPG2) steel at 62/63HRC for the cutting edge of the blade in order to ensure exceptional cutting performance and durability of the sharpening, while ensuring a remarkable resilience and resistance to oxidation given by the lamination process of the blade.

Intended Use: Sporting / Collection

Production type: Industrial
Country of Production: Italy
Blade: Rolled Japanese stainless steel (San Mai) with sintered cutting edge in SPG2 at 62/63HRC
Blade Finish: Satin
Handle: FRN (Fiberglass Reinforced Nylon) with stainless steel liners
Blade length: 65mm.
Blade thickness: 3mm.
Length closed: 85m.
Total length: 144mm.
Thickness when closed: 14mm
Weight: 79g.
Closure: Liner Lock in AISI 420 stainless steel
Clip: flush, AISI 302 stainless steel, removable and reversible
Packaging: Cardboard box with Fox Knives logos
Notes: Design by Jesper Voxnaes - Opening movement on ball bearings - Carson Flipper opening system - Exclusive version by Coltelleria Collini, Sprint Run, with Japanese Takefu Steel SPG2 Rolled Stainless Steel.

The rolled steel - imported in Italy by Collini Steel directly from the Japanese Takefu Steel - is based on the ancient Japanese tradition in the creation of the famous Samurai swords. As early as 1100, expert Japanese blacksmiths combined different materials to give Katana swords incredible cutting capabilities combined with previously unknown strength and flexibility. It is thanks to this revolutionary construction technique that the Samurai swords have been preserved until our days becoming one of the most fascinating objects made by man. Following this tradition applied to modern metallurgy, we are now able to have technologically advanced steels already tested and used in cutlery by famous brands such as Fallkniven, Cold Steel, Mcusta, Kai, Sog, Zwilling, Rockstead, etc.

- Longer cutting edge life
thanks to the use of high quality steels with high carbon content (VG10, CoS, Shiro) or sintered (SPG2), in the core steel, the blade, once hardened, reaches hardness and cutting performances definitely higher than those reached with the use of traditional steels.

- Greater resilience
Built on the principle of Japanese swords, the multilayer steel is difficult to break thanks to the toughness of the central steel (Core Steel) and the elasticity of the steel used for the lateral coating (Stainless Steel).

- Improved corrosion resistance
The steel used for the outer layers (Stainless Steel) gives the blade a high resistance to corrosion. The combination of the two or more materials used by Takefu Steel generates, at a galvanic level, a structure that improves corrosion resistance even on the edge.

- Easy machining even after heat treatment
Although steel normally becomes harder after hardening, the lateral steel used in multilayer machining does not lose its softness and allows easy machining, drilling or welding even after heat treatment. For optimum blade performance, cryogenic treatment is recommended.

- Improved aesthetic performance
Knives made of multi-state steel or damask pattern at the end of the processing are aesthetically elegant, refined and highly appreciated by collectors all over the world.

Intended Use: Sporting / Collection

Production type: Industrial
Country of Production: Italy
Blade: Stainless steel M390 59/61HRC
Blade Finish: Acid Stone Washed
Handle: Natural Micarta with AISI 303 stainless steel screws
Blade length: 65mm.
Blade thickness: 3mm.
Length closed: 85m.
Total length: 144mm.
Thickness when closed: 14mm
Weight: 80g.
Closure: Liner Lock in AISI 420 stainless steel
Clip: flush, AISI 302 stainless steel, removable and reversible
Packaging: Cardboard box with Fox Knives logos
Notes: Design by Jesper Voxnaes - Opening movement on ball bearings - Carson Flipper opening system

With this exclusive edition of Coltelleria Collini in collaboration with Fox, it was decided to combine a Japanese model such as the Core with a Japanese powder steel (sintered) and laminated (SanMai) by Japanese Takefu Steel.

For this project we have chosen to use Super Gold2 (SPG2) steel at 62 / 63HRC for the cutting edge of the blade in order to guarantee exceptional cutting performance and duration of sharpening, while ensuring at the same time a remarkable resilience and resistance to oxidation. given by the blade lamination process.

Intended use: Sports / Collection

Type of production: Industrial
Country of production: Italy
Blade: Japanese laminated stainless steel (San Mai) with sintered cutting edge in SPG2 at 62 / 63HRC
Blade treatment: satin finish
Handle: FRN
Blade length: 75mm.
Blade thickness: 4mm.
Closed length: 103m.
Total length: 188mm.
Thick when closed: 18mm
Weight: 135g.
Closure: Liner Lock
Clip: in steel
Sheath: -
Packaging: Cardboard box with Fox Knives logos
Notes: Opening by Carson Flipper system - Movement on ball bearings - Design by Jesper Voxnaes - Exclusive version Collini Cutlery, Sprint Run, with Japanese stainless steel by Takefu Steel SPG2 Laminate.

The rolled steel - imported into Italy by Collini Steel directly from the Japanese Takefu Steel - is based on the ancient Japanese tradition in the creation of the famous Samurai swords. In fact, as early as 1100 the expert Japanese blacksmiths combined different materials together to give the Katana swords incredible cutting capabilities combined with a resistance and flexibility previously unknown. It is thanks to this revolutionary construction technique that Samurai swords have been preserved to this day, becoming one of the most fascinating objects made by man. Following this tradition applied to modern metallurgy, today we are able to have technologically advanced steels already tested and used in cutlery also by famous brands such as Fallkniven, Cold Steel, Mcusta, Kai, Sog, Zwilling, Rockstead, etc.

- Longer tool life
thanks to the use of very high quality steels with high carbon content (VG10, CoS, Shiro) or sintered (SPG2), in the heart of the sheet (Core Steel), the blade, once hardened, achieves decidedly hardness and cutting performance higher than those achieved with the use of traditional steels.

- Greater resilience
built with the Japanese sword principle, multilayer steel is difficult to break thanks to the toughness of the central steel (Core Steel) and the elasticity of the steel used for the side facing (Stainless Steel).

- Better corrosion resistance
the steel used for the external layers (Stainless Steel) guarantees the blade a high resistance to corrosion. The combination of the two or more materials used by Takefu Steel generates, on a galvanic level, a structure that improves corrosion resistance even on the wire.

- Easy processing even after heat treatment
although steel normally becomes harder after quenching, the lateral steel used in multilayer processing does not lose its softness and allows easy processing, drilling or welding even after heat treatment. For an optimal performance of the blade, cryogenic treatment is recommended.

- Improvement of the aesthetic result
The knives made with multi-state steel or damascus pattern at the end of the processing are aesthetically elegant, refined and highly appreciated by collectors all over the world.

With this exclusive edition of Coltelleria Collini in collaboration with Fox, it was decided to combine a Japanese model such as the Core with a Japanese powder steel (sintered) and laminated (SanMai) by Japanese Takefu Steel.

For this project we have chosen to use Super Gold2 (SPG2) steel at 62 / 63HRC for the cutting edge of the blade in order to guarantee exceptional cutting performance and duration of sharpening, while ensuring at the same time a remarkable resilience and resistance to oxidation. given by the blade lamination process.

Intended use: Sports / Collection

Type of production: Industrial
Country of production: Italy
Blade: Japanese laminated stainless steel (San Mai) with sintered cutting edge in SPG2 at 62 / 63HRC
Blade treatment: satin finish
Handle: FRN
Blade length: 75mm.
Blade thickness: 4mm.
Closed length: 103m.
Total length: 188mm.
Thick when closed: 18mm
Weight: 135g.
Closure: Liner Lock
Clip: in steel
Sheath: -
Packaging: Cardboard box with Fox Knives logos
Notes: Opening by Carson Flipper system - Movement on ball bearings - Design by Jesper Voxnaes - Exclusive version Collini Cutlery, Sprint Run, with Japanese stainless steel by Takefu Steel SPG2 Laminate.

The rolled steel - imported into Italy by Collini Steel directly from the Japanese Takefu Steel - is based on the ancient Japanese tradition in the creation of the famous Samurai swords. In fact, as early as 1100 the expert Japanese blacksmiths combined different materials together to give the Katana swords incredible cutting capabilities combined with a resistance and flexibility previously unknown. It is thanks to this revolutionary construction technique that Samurai swords have been preserved to this day, becoming one of the most fascinating objects made by man. Following this tradition applied to modern metallurgy, today we are able to have technologically advanced steels already tested and used in cutlery also by famous brands such as Fallkniven, Cold Steel, Mcusta, Kai, Sog, Zwilling, Rockstead, etc.

- Longer tool life
thanks to the use of very high quality steels with high carbon content (VG10, CoS, Shiro) or sintered (SPG2), in the heart of the sheet (Core Steel), the blade, once hardened, achieves decidedly hardness and cutting performance higher than those achieved with the use of traditional steels.

- Greater resilience
built with the Japanese sword principle, multilayer steel is difficult to break thanks to the toughness of the central steel (Core Steel) and the elasticity of the steel used for the side facing (Stainless Steel).

- Better corrosion resistance
the steel used for the external layers (Stainless Steel) guarantees the blade a high resistance to corrosion. The combination of the two or more materials used by Takefu Steel generates, on a galvanic level, a structure that improves corrosion resistance even on the wire.

- Easy processing even after heat treatment
although steel normally becomes harder after quenching, the lateral steel used in multilayer processing does not lose its softness and allows easy processing, drilling or welding even after heat treatment. For an optimal performance of the blade, cryogenic treatment is recommended.

- Improvement of the aesthetic result
The knives made with multi-state steel or damascus pattern at the end of the processing are aesthetically elegant, refined and highly appreciated by collectors all over the world.

This knife blade is convex on both sides in the tradition of the highly praised Japanese sword. This shape is both sharp and strong, and can still slice cleanly through a sheet of paper even after the punishment of chopping and cutting through dried bamboo. Using this special blade shape is an excellent way of allowing an edge to be thick without sacrificing any of its sharpness. This knife is of preeminent sharpness. This is a durable knife with strong cutting capabilities that will last for a long time. Even when used for rigorous cutting, the blade will not bite or catch thanks to its convex shape. Other knives will often bite or catch, and may acquire nicks if pulled out suddenly.

Blade: XR-7 steel at 64.3 HRC with DLC treatment
Handle: Same (real breed leather) and aeronautical aluminum with Hv400 black alumite treatment
Blade length: 95 mm.
Blade thickness: 4 mm.
Total length: 210 mm.
Weight: 145 g.
Closing: Liner Lock in 402J2 steel at 52HRC
Clip: in 402J2 steel at 52HRC
Notes: Accompanied by a warranty certificate with technical specifications.

Intended use: Sports / EDC

Type of production: Industrial
Country of production: Italy
Blade: stainless steel N690Co 58 / 59HRC
Blade finish: Satin finish
Handle: G10 with stainless steel internal folders and G10 spacer
Blade length: 75mm.
Blade thickness: 3.5mm.
Length closed: 103mm.
Total length: 178mm.
Thick when closed: 14.2mm.
Weight: 95g.
Closure: Liner Lock
Clip: stainless steel, machined from solid
Packaging: Cardboard box with Fox Knives logos
Notes: Design by Jesper Voxnaes

Destination of use: sports

Type of production: Industrial
Country of production: Italy
Blade: N690 59 / 60HRC stainless steel
Blade treatment: satin finish
Handle: Carbon Fiber
Blade length: 85mm.
Blade thickness: 3.5mm.
Length closed: 115mm.
Total length: 200mm.
Thick when closed: 14.5mm
Weight: 101g.
Closure: LinerLock
Clip: stainless steel, removable
Sheath: nylon case with zip
Packaging: cardboard box with Fox Knives logos
Notes: Design by Jens Anso

Destination of use: sports

Type of production: Industrial
Country of production: Italy
Blade: N690 59 / 60HRC stainless steel
Blade treatment: satin finish
Handle: Ziricote wood with stainless steel liners
Blade length: 85mm.
Blade thickness: 3.5mm.
Length closed: 115mm.
Total length: 200mm.
Thick when closed: 14.5mm
Weight: 106g.
Closure: LinerLock
Clip: stainless steel, removable
Sheath: nylon case with zip
Packaging: cardboard box with Fox Knives logos
Notes: Design by Jens Anso

Destination of use: sports

Type of production: Industrial
Country of production: Italy
Blade: N690 59 / 60HRC stainless steel
Blade treatment: stonewashed
Handle: G10 with stainless steel folders
Blade length: 90mm.
Blade thickness: 4mm.
Length closed: 123mm.
Total length: 210mm.
Thick when closed: 18mm
Weight: 160g.
Closure: LinerLock
Clip: stainless steel, removable and reversible
Sheath: nylon case with zip
Packaging: cardboard box with Fox Knives logos
Notes: Design by Kmrj Kmaxrom

Purpose: Sportsman / Tactical

Type of production: Industrial
Country of production: Maniago - Italy
Blade: stainless steel N690Co 58HRC
Blade Treatment: Stonewashed
Handle: G10
Blade Length: 65mm.
Blade thickness: 3mm.
Closed length: 120mm.
Total Length: 170mm.
Closure thickness: 14mm.
Balance: -
Weight: 98g.
Opening: KOR Kinetic Opening Ramp system by Bram Frank
Washers: Brass, with ball bearings
Closure: Liner Lock
Clip: Stainless steel removable and reversible
Sheath: -
Packing: Cardboard box with Fox logos
Notes: Aluminum ring - Design by Bastinelli

Intended use: Sports / Tactical

Type of production: Industrial
Production Country: Italy
Blade: stainless steel Elmax 59 / 61HRC
Blade treatment: Satin finish
Handle: Carbon fiber with titanium spacer
Blade length: 75mm.
Blade thickness: 3.5mm.
Closed Length: 103m.
Overall length: 178mm.
Thick when closed: -
Weight: 95g.
Lock: Liner Lock
Clip: Titanium
Sheath: -
Packaging: Cardboard box with logos Fox Knives
Notes: Design by Jesper Voxnaes

Intended use: Sports

Type of production: Industrial
Production Country: Italy
Blade: N690 stainless steel
Blade treatment: Satin finish
Handle: cocobolo wood
Blade length: 90mm.
Blade thickness: 4mm.
Closed Length: 126mm.
Overall length: 220mm.
Thick when closed: 16mm
Weight: 158g.
Lock: Liner Lock
Clip: -
Sheath: Green leather
Packaging: Cardboard box with logos Fox Knives
Notes: Design by Boris Manasherov

Intended use: knife for sailors

Type of production: Industrial
Country of production: Italy
Blade: stainless steel 420 54 / 54HRC
Blade treatment: satin finish
Handle: FRN (Fiberglass Reinforced Nylon)
Blade length: 75mm.
Blade thickness: 3mm.
Closed Length: 105mm
Overall length: 180mm.
Weight: 155g.
Lock: Liner Lock
Packaging: cardboard box with Fox logos
Notes: untie knots, multipurpose tool

Intended use: Sports / Collection

Type of production: Industrial
Country of production: Italy
Blade: Stainless Damascus Super Dense Twist 364 layers (ATS34 + PMC27)
Surface treatment: -
Handle material: wood bocote
Blade length: 8.9mm.
Blade thickness: 3mm.
Closed Length: 112mm.
Overall length: 200mm.
Thick when closed: 14.5mm
Weight: 98g.
Lock: Liner Lock
Clip: -
Sheath: -
Packaging: cardboard box with Fox Knives logos
Notes: Design by Bob Terzuola

Intended use: Sports / collection

Type of production: Industrial
Country of production: Italy
Blade: N690 stainless steel
Handle material: wood ziricote
Blade length: 88mm.
Blade thickness: 3mm.
Closed Length: 110mm.
Overall length: 200mm.
Thick when closed: 14mm
Weight: 94g.
Lock: Liner Lock
Clip: -
Sheath: Leather
Packaging: Cardboard box with logos Fox Knives
Notes: Design by Bob Terzuola

Rockstead - SAI Titanium ZDP-189 - knife

Blade: ZDP-189 in 66.8HRC
Handle material: titanium
Blade length: 80 mm.
Blade Thickness: 3.7 mm.
Overall length: 190 mm.
Weight: 140g.
Closure: liner lock
Sheath: Black leather
Notes: Accompanied by a certificate of guarantee with the technical specifications.

Destinazione d'uso: Sportivo

Tipo di produzione: Industriale
Produzione Lama: Italia
Lama: in acciaio inox 440A 56/58HRC
Trattamento Lama: -
Manicatura: Fibra di Carbonio
Lunghezza lama: 70mm.
Spessore lama: 3mm.
Lunghezza chiuso: -
Lunghezza totale: 170mm.
Spessore da chiuso: -
Bilanciatura: -
Peso: 85g.
Chiusura: Liner Lock
Clip: Acciaio Inox
Fodero: -
Confezione: Scatola di cartone con loghi Fox
Note: -

Intended Use: Mushroom Knife

Blade: Stainless steel 440
Handle material: Cocobolo
Blade length: 65mm.
Blade Thickness: 3mm.
Closed Length: 110mm.
Total length: 175mm.
Balance: -
Weight: 100g.
Closure: Liner Lock
Clip: Stainless Steel
Sheath: -
Notes: Nylon brush

Intended use: Hunting / Sports
Type of production: Industrial
Production Blade: Italy
Blade: Stainless steel N690Co
Treatment Lama: -
Handle material: Wood Ziricote
Blade length: 78mm.
Blade thickness: 4mm.
Closed Length: 124mm
Total length: 190mm.
Thick when closed: 15mm
Balance: -
Weight: 104g.
Lock: Liner Lock
Clip: steel

Sheath: -
Packaging: Cardboard box with Fox logos
Notes: -

Destinazione d'uso: Caccia/Sportivo
Tipo di produzione: Industriale
Produzione Lama: Italia
Lama: in acciaio inox N690Co
Trattamento Lama: -
Manicatura: Legno di Ziricote
Lunghezza lama: 85mm.
Spessore lama: 4mm.
Lunghezza chiuso: -
Lunghezza totale: 210mm.
Spessore da chiuso: -
Bilanciatura: -
Peso: 138g.
Chiusura: Liner Lock
Clip: - Fodero: Cuoio
Confezione: Scatola di cartone con loghi Fox
Note: Design by Russ Kommer

Intended use: Sports

Type of production: Industrial
Production Lama: Italy
Blade: N690Co stainless steel
Blade treatment: -
Handle: Ziricote wood
Blade length: 115mm.
Blade thickness: 3.5mm.
Closed length: 140mm.
Total length: 255mm.
Thick when closed: 18mm.
Balancing: -
Weight: 204g.
Closure: Liner Lock with safety
Clip: in stainless steel
Sheath:-
Packaging: cardboard box with Fox logos
Notes: design by Citadel

Intended use: Utility

Type of production: Industrial
Production Lama: Italy
Blade: In stainless steel N690Co 58 / 60HRC
Blade treatment: -
Handle: Santos
Blade length: 100mm.
Blade thickness: 5mm.
Closed length: 130mm.
Total length: 220mm.
Thick when closed: 22mm.
Balancing: -
Weight: 200g.
Closure: Liner Lock
Clip: -
Sheath: Brown Leather
Packaging: cardboard box with Fox logos
Note: -

Intended use: knife to sailors
Type of production: Industrial
Production Lama: Italy
Blade: 440A Stainless Steel 56 / 58HRC
Blade treatment: -
Handle: Aluminium Aeronautic
Blade length: 70mm.
Blade thickness: 3mm.
Closed Length: -
Overall length: 175mm.
Thick when closed: -
Balancing: -
Weight: 210g.
Lock: Liner Lock
Clip: -
Sheath: -
Packaging: Cardboard box with Fox logos
Notes: Untie knots forged - hole Gira crickets on the blade

Intended use: Collection / Gentleman

Production Type: Semi-Industrial
Production Blade: Italy
Blade: Damascus steel ATS34 + pmc27 to 364 layers
Treatment Blade: -
Handle material: birch burl stabilized
Blade length: 80mm.
Blade thickness: 3mm.
Closed Length: 108mm.
Overall length: 190mm.
Thick when closed: 19mm.
Balancing: -
Weight: 88g.
Lock: Liner Lock
Clip: -
Sheath: -
Packaging: Cardboard gift box, warranty card
Notes: Design by Oreste Frati

LoneWolf - Loveless Clip Point Folder - knife

Intended use: Sport

Type of production: Industrial
Production Blade: Italy
Blade: 154CM stainless steel
Treatment Blade: -
Handle: Micarta
Blade length: 75mm.
Blade thickness: 3mm.
Length closed: -
Overall length: 190mm.
Thick when closed: -
Balancing: -
Weight: 128g.
Lock: Liner Lock
Clip: -
Sheath: Leather
Packaging: cardboard box with logos Lonewolf
Notes: Design by Loveless

Rockstead - About HPC - knife

With the brand Rockstead, Ishida Co. in Sakai, Japan, are currently marketed the best industrial knives currently in production.

Created by Katsumi Kitano, who for over 20 years has been producing quality knives so as to have been awarded the highest honor among the artisan knife makers in Japan, proved to be exceptional in cutting capacity, penetration and sealing wire is at the level of innovation for materials and construction techniques.

Blade: stainless Hitachi YXR7 to 64.8HRC coverage HPC 3micron - Hv1800
Handle material: Duralumin A2024 with anodized surface to HV400 and skin of Breed
Blade length: 82 mm.
Blade Thickness: 4 mm.
Overall length: 189 mm.
Weight: 100 g.
Lock: Liner Lock 402J2 steel at 52HRC
Clip: 402J2 steel at 48HRC
Notes: Accompanied by a certificate of guarantee with the technical specifications.