Knives, collection knife, tactical knives, outdoor knives, pocket knives and tools

With Rockstead brand of Ishida Co. Sakai, Japan, they are currently marketed with the best industrial knives currently in production.

Created by Katsumi Kitano, who for 20 years has been producing quality knives so much to have been awarded the highest award among the knife craftsmen in Japan, you demonstrate exceptional both in cutting capacity, penetration and tightness of the wire both in terms of innovation for and materials used for the construction techniques.

Blade: ZDP189 rolled stainless steel at 66.6 HRC inside and VG10 at 60.8 HRC outside
Handle: Same (real ray skin) and aircraft aluminum with black alumite treatment to HV400
Blade length: 95 mm.
Blade thickness: 4 mm.
Overall length: 210 mm.
Weight: 145 g.
Lock: Liner Lock steel in 52HRC 402J2
Clip: Steel 402J2 to 52HRC
Notes: Accompanied by a certificate of guarantee with the technical specifications.

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: In very good condition
* Commercially available Discontinued
* Sharpening: Factory
* Marks on blade: -
* Marks on handle: - -
* Box: marketed in silk pouch.
* Scabbard: Leather, belt, original, with a few small marks given by time.
* Manuals, Certificates and Warranties: present.
* Checked and Certified by our in-house laboratory



The HIGO-MH-DLC folder features a 3.5-inch YXR7 blade with DLC coating and Micarta handle. The incredible mirror finish is achieved by heat treating the blade and gradually grinding by hand with wet and dry sandpaper of 400, 600, 800, 1,200 and 2,000. The HIGO-MH-DLC comes with a black leather belt case with a slot to hold the included torx wrench.

Country of manufacture: Japan
Type of manufacture: midtech
Blade: DLT571 steel (Hitachi YXR7 at 64.1HRC with 3micron HPC coating and hardness of Hv1300)
Handle: 2mm stainless steel sus402J2 at 52HRC with micarta handles
Blade length: 90mm.
Blade thickness: 3.5mm.
Total length: 216mm.
Weight: 139g.
Closure: Liner Lock
Clip: stainless steel
Notes: Serial number 303 - 2010 knife accompanied by warranty certificate with technical specifications - Model discontinued and no longer commercially available

Intended use: Tactical/Military

Blade: AUS-8 56/58HRC stainless steel
Taiwan blade production
Handle: Aluminum
Blade length: 100mm.
Blade thickness: 3.5mm.
Closed length: 135mm.
Total length: 235mm.
Balancing: -
Weight: 155g.
Closure: Liner Lock
Clip: removable and reversible in stainless steel
Scabbard: -
Notes: design by Carson - AutoLAWKS safety catch

Under the brand name Rockstead, from Ishida Co. in Sakai, Japan, the best industrial knives currently in production are currently marketed: created by Katsumi Kitano, who has been making quality knives for over 30 years to the extent that he has been awarded the highest distinction among artisan knife makers in Japan, they prove to be exceptional both in cutting ability, penetration and edge-holding and in innovation in the materials used and construction techniques.

Intended Use: Collection/Sportsman

Type of production: Midtech
Country of manufacture: Sakai - Japan
Blade: rolled stainless steel ZDP189 at 66.4 HRC on the inside and VG10 at 61.3 HRC on the outer cheeks
Blade treatment: mirror polish
Handle: Aluminum A6063S with anodization to Hv400 hardness and genuine Breed leather inserts
Blade length: 82mm.
Blade thickness: 3.7mm.
Length closed: 111mm.
Total length: 189mm.
Thickness when closed: 16.2mm.
Weight: 133g.
Opening: via ambidextrous pin
Washers: steel
Closure: Sub FrameLock of 2mm. made of SUS402J2 stainless steel at 50HRC
Clip: deep pocket, 1mm. 420J2 stainless steel with PVD treatment
Packaging: Wooden box with Rockstead logos, certificate with serial number and steel hardness test
Notes: Shinogi Zukuri type blade sharpening

Intended Use: Tactical / Self Defense Tool / Sporting

Production type: Industrial
Country of Production: China
Blade: D2 steel
Blade Finish: Blackwash
Handle: G-10 with stainless steel liners and copper spacer/karambit ring
Blade length: 68mm.
Blade thickness: 2.9mm.
Length closed: 122mm.
Total length: 190mm.
Weight: 79g.
Closure: Liner Lock
Clip: Stainless steel, removable and reversible
Package: Cardboard box with CRKT logos
Notes: Design by Jesper Voxnaes - Carson Flipper opening system on IKBS ball bearings - Designed for personal defense, when closed it can be used as a karambit and as a kubotan.

Intended Use: Sporting

Production type: Industrial
Country of Production: Taiwan
Blade: Stainless steel AUS-8 58/60 HRC
Blade Finish: Satin finish
Handle: FRN (Fiberglass Reinforced Nylon) with stainless steel liners
Blade length: 85mm.
Blade thickness: 2.3mm.
Length closed: 110mm.
Total length: 195mm.
Weight: 54g.
Closure: Liner Lock
Clip: Stainless steel, removable and reversible
Package: Cardboard box with CRKT logos
Notes: Design by Richard Rogers - Carson Flipper opening system on IKBS ball bearings - New 2021 version of the CEO 7096 model, winner of the Blade Show 2019 as "Best Buy Of The Year".

Intended use: Sports

Type of production: Industrial
Country of production: China
Blade: 8Cr13Mov 58/60 HRC stainless steel
Blade treatment: Satin finish
Handle: Nylon reinforced with fiberglass
Blade length: 79mm.
Blade thickness: 2.2mm.
Length closed: 113mm.
Total length: 194mm.
Weight: 59g.
Closing: Liner Lock
Clip: stainless steel, removable and reversible
Packaging: cardboard box with CRKT logos
Notes: Design by Richard Rogers - IKBS ball bearing opening system - Winner of the 2019 Blade Show as "Best Buy Of The Year"

This knife blade is convex on both sides in the tradition of the highly praised Japanese sword. This shape is both sharp and strong, and can still slice cleanly through a sheet of paper even after the punishment of chopping and cutting through dried bamboo. Using this special blade shape is an excellent way of allowing an edge to be thick without sacrificing any of its sharpness. This knife is of preeminent sharpness. This is a durable knife with strong cutting capabilities that will last for a long time. Even when used for rigorous cutting, the blade will not bite or catch thanks to its convex shape. Other knives will often bite or catch, and may acquire nicks if pulled out suddenly.

Blade: XR-7 steel at 64.3 HRC with DLC treatment
Handle: Same (real breed leather) and aeronautical aluminum with Hv400 black alumite treatment
Blade length: 95 mm.
Blade thickness: 4 mm.
Total length: 210 mm.
Weight: 145 g.
Closing: Liner Lock in 402J2 steel at 52HRC
Clip: in 402J2 steel at 52HRC
Notes: Accompanied by a warranty certificate with technical specifications.

Intended use: EDC

Type of production: Industrial
Country of production: China
Blade: 8Cr12MoV stainless steel
Blade treatment: Black Stone Washed
Handle: G10
Blade length: 70mm.
Blade thickness: 2.8mm.
Closed length: 98mm.
Total length: 165mm.
Weight: 82g.
Closure: Liner Lock
Clip: stainless steel, deep pocket type, removable and reversible
Packaging: cardboard box with CRKT logos
Notes: Design by Liong Mah

Intended use: Sports

Type of production: Industrial
Country of production: USA
Blade: 420HC stainless steel
Blade treatment: Satind
Handle: 6061-T6 aluminum
Blade length: 66mm.
Blade thickness: 2.6mm.
Length closed: 87mm.
Overall length: 151mm.
Thick when closed: 11mm.
Balancing: -
Weight: 38g.
Opening: hole on the blade
Washers: in brass
Closure: Liner Lock
Clip: stainless steel, removable, with the function of a bottle opener
Sheath: -
Packaging: Cardboard box with Leatherman logos
Note: -

This knife can still slice paper even after the punishment of striking and cutting dried bamboo.This knife has a beautiful convex surface with extreme sharpness.This is a flagship of the ROCKSTEAD folding knife collection. Both sides of the blade are convex. The blade is in the shape of the traditional Japanese sword. It cuts well and is strong. You can enjoy its strong cutting capabilities for a long time.

Full length: 213.00 mm
Blade length: 93.00 mm
Weight: 155 g
Thickness: 3.70 mm
Material: YXR7
Hardness: HRC65
Blade geometry: Honzukuri
Hard coating: DLC
Knives type: Folder

Intended use: Sports

Type of production: Industrial
Production Country: Taiwan
Blade: stainless steel 1.1416 55/57 HRC
Blade treatment: Stonewashed
Handle: FRN
Blade length: 90mm.
Blade thickness: 3.5mm.
Closed Length: 120mm.
Overall length: 210mm.
Weight: 122g.
Lock: Liner Lock
Clips: stainless steel
Packaging: cardboard box with CRKT logos
Notes: The knife can be easily disassembled and reassembled without the use of tools or screwdrivers - Design by Ken Onion

Intended use: Sports / EDC

Type of production: Industrial
Production Country: Taiwan
Blade: Stainless steel AUS-8 to 57 / 59HRC
Blade treatment: Satin
Handle: Anodized aluminum with aged effect
Blade length: 65mm.
Blade thickness: 3mm.
Closed Length: 100mm.
Overall length: 165mm.
Weight: 96g.
Lock: Liner Lock
Clip: removable, stainless steel
Packaging: cardboard box with CRKT logos - Design by Ken Onion - opening system on IKBS type ball bearings with open type Carson Flipper

Intended use: Sports

Type of production: Industrial
Production Lama: China
Blade: Stainless steel CTS BD-1 to 57 / 59HRC
Blade treatment: Satin
Handle: FRN with stainless steel liners
Blade length: 76mm.
Blade thickness: 4mm.
Length closed: 108mm.
Overall length: 184mm.
Thick when closed: -
Balancing: -
Weight: 167g.
Lock: Liner Lock with security system ILS Ikoma Lock Safety
Clips: stainless steel
Sheath: -
Packaging: cardboard box with logos CRKT, Design by Flavio Ikoma, opening system with ball bearing type IKBS opening type Carson Flipper

Intended Use: Sport / Tactical

Type of production: Industrial
Blade Production: China
Blade: Stainless steel 8Cr14MoV 55 / 57HRC
Blade treatment: -
Handle: Zytel
Blade length: 95mm.
Blade thickness: 3.5mm.
Closed Length: 131mm.
Overall length: 225mm.
Thick when closed: -
Balancing: -
Weight: 173g.
Lock: Liner Lock with secure additional LAWKS
Clip: removable and reversible stainless steel
Sheath: -
Packaging: cardboard box with logos CRKT

Intended Use: Sport / Tactical

Type of production: Industrial
Production Lama: China
Blade: 8Cr14MoV stainless steel 55/57HRC
Treatment Lama: -
Handle: Zytel
Blade length: 95mm.
Blade thickness: 3.5mm.
Length closed: 131mm.
Total length: 225mm.
Thick when closed: -
Balance: -
Weight: 173g.
Lock: Liner Lock with secure additional LAWKS
Clip: removable and reversible stainless steel
Sheath: -
Packaging: cardboard box with logos CRKT

Rockstead - SAI Titanium ZDP-189 - knife

Blade: ZDP-189 in 66.8HRC
Handle material: titanium
Blade length: 80 mm.
Blade Thickness: 3.7 mm.
Overall length: 190 mm.
Weight: 140g.
Closure: liner lock
Sheath: Black leather
Notes: Accompanied by a certificate of guarantee with the technical specifications.

Intended Use: Sport / EDC

Type of production: Industrial
Production Lama: China
Blade: Sandvik 12C27 stainless steel 59/61 HRC
Treatment Blade: -
Handle: Black G-10
Blade length: 79mm.
Blade thickness: 2.5mm.
Closed Length: 109mm.
Overall length: 187mm.
Thickness when folded: 9mm.
Balancing: -
Weight: 85g.
Lock: Liner Lock
Clip: removable stainless steel
Sheath: -
Packaging: cardboard box with logos CRKT
Notes: Opening system IKBS (Ikoma Korth Bearing System) on ball bearings - Design by Flavio Ikoma

Intended Use: Sport / Tactical

Type of production: Industrial
Production Lama: China
Blade: Stainless steel 8Cr14MoV 55 / 57HRC
Treatment Lama: -
Handle: Zytel
Blade length: 95mm. Serration: 35mm.
Blade thickness: 3.5mm.
Closed Length: 135mm.
Overall length: 235mm.
Thick when closed: -
Balancing: -
Weight: 208g.
Lock: Liner Lock with secure additional LAWKS
Clip: Removable stainless steel
Sheath: -
Packaging: cardboard box with logos CRKT

Intended Use: Sport / Tactical

Type of production: Industrial
Production Lama: China
Blade: 8Cr14MoV stainless steel 55/57HRC
Treatment Blade: -
Handle: Zytel
Blade length: 95mm.
Blade thickness: 3.5mm.
Closed Length: 135mm.
Overall length: 235mm.
Thick when closed: -
Balancing: -
Weight: 170g.
Lock: Liner Lock with secure additional LAWKS
Clip: removable stainless steel
Sheath: -
Packaging: cardboard box with logos CRKT

Intended Use: Sport / Tactical

Type of production: Industrial
Production Lama: China
Blade: 8Cr14MoV stainless steel 55/57HRC
Treatment Lama: -
Handle: Zytel
Blade length: 89mm.
Blade thickness: 3.5mm.
Closed Length: 114mm.
Total length: 203mm.
Thick when closed: -
Balance: -
Weight: 161g.
Lock: Liner Lock with secure additional LAWKS
Clip: removable and reversible stainless steel
Sheath: -
Packaging: cardboard box with logos CRKT

Intended Use: Sport / Tactical

Type of production: Industrial
Production Lama: China
Blade: 8Cr14MoV stainless steel 55/57HRC
Treatment Lama: -
Handle: Zytel
Blade length: 95mm.
Blade thickness: 3.5mm.
Length closed: 131mm.
Total length: 225mm.
Thick when closed: -
Balance: -
Weight: 173g.
Lock: Liner Lock with secure additional LAWKS
Clip: removable and reversible stainless steel
Sheath: -
Packaging: cardboard box with logos CRKT

What makes a good logo knife? It should be affordable, and it should have some large flat areas on the blade or frame suitable for logo imprinting. So we are very happy to present the Drifter series. They're high-quality knives that are priced low enough to purchase in quantity, and all have flat areas that are perfect for our "Company Billboard" imprinting by laser or silk screen. Or you can take any one to your local trophy house for personalized engraving. 

The Drifter Stainless is a stainless steel frame-lock folder with a Razor-Sharp edge. The flat titanium nitride-coated frames are ideally suited for imprinting. It also features a 2.875" 8Cr14MoV stainless steel blade with a Razor-Sharp edge and a brushed finish. A stainless steel clip is included.

Intended use: Sport

Type of production: Industrial
Production Lama: China
Blade: 8Cr14MoV stainless steel
Treatment Lama: -
Handle material: G10
Blade length: 70mm.
Blade thickness: 2.5mm.
Closed Length: 93mm.
Total length: 163mm.
Thick when closed: 14mm.
Balance: -
Weight: 66g.
Lock: Liner Lock
Clip: removable stainless steel
Sheath: -
Packaging: cardboard box with logos CRKT

The CRKT M16-14ZLEK Big Dog Law Enforcement knife is a Kit Carson design that is built for professional use. The black Zytel InterFrame handle has 420J2 stainless steel liners and CRKT's AutoLAWKS knife safety, which automatically actuates when the blade is open making it a virtual fixed blade. First responders will appreciate the integrated tungsten carbide window breaker and seat belt cutter. The pocket clip is 4-way reversible for every possible carry type, but not designed for tip-up in-pocket carry.

The Carson M16-14ZLEK features a black finished Tanto blade with a partially serrated cutting edge. The blade is easily opened with the dual thumb studs or a push of the Carson Flipper, which has an integrated seat belt cutter.

Specifications:
Overall Length: 9.25"
Blade Length: 3.75"
Blade Thickness: .14"
Blade Steel: AUS 8, HRC 55-57
Grind: Hollow
Handle Material: Zytel
Closed Length: 5.5"
Weight: 6.2 oz. 
Made in Taiwan

CRKT M16-13 Desert Spear Point Folding Knife M16-13ZM has been developed specifically to blend into the desert environment. This CRKT knife features the super rigid InterFrame build with 420J2 stainless steel liners, threaded stainless steel back spacers, and Desert Camo pattern glass filled nylon scales. The spear point blade of the knife is non-reflective bead-blast finished AUS 4 stainless steel, crafted into a partially serrated combo edge that blends and almost disappears in the desert. The Columbia River M16-13 Desert Combo Edge Folder Knife is ideal when weight and bulk must be kept to a minimum, and it comes with a removable, single position clothing/gear clip for easier carrying. It also features Columbia River Knife & Tool's exclusive patented AutoLAWKS safety, which automatically turns the folder into a fixed blade when the blade is opened and locked. One-hand opening and closing is quick and smooth, the result of precision tolerances and lubrous washers at the blade pivot, and the dual ambidextrous thumb studs with checkered surfaces provide instant access in any circumstance. For a folding blade knife that's at home in the desert, choose the Columbia River Knife & Tool M16-13 Desert Camo Nylon Handle Folding Knife.

Intended Use: Tactical / Sports

Type of production: Industrial
Production Lama: China
Blade: stainless steel 8Cr14, 58-59 HRC
Treatment Blade: Titanium Nitride
Handle material: G10
Blade length: 76mm.
Blade thickness: 3mm.
Closed Length: 108mm.
Total length: 184mm.
Weight: 108g.
Lock: Liner Lock with Auto-closure LAWKS
Clip: removable and reversible stainless steel
Sheath: -
Packaging: cardboard box with logos CRKT
Notes: design by Kit Carson

Blade: AUS-8 stainless steel high-carbon Teflon 57/58HRC
Handle: Handle: Zytel
Blade length: 84 mm.
Blade Thickness: 2.5 mm.
Total length: 200 mm.
Weight: 110 g.
Lock: Liner Lock
Clip: Stainless Steel
Notes: Equipped with safety lock and guard LAWKS "Carson Flipper" - glass breaking

Intended Use: Tactical / Sports

Type of production: Industrial
Production Lama: China
Blade: stainless steel 8Cr14, 58-59 HRC
Treatment Blade: Titanium Nitride
Handle material: G10
Blade length: 76mm.
Blade thickness: 3mm.
Closed Length: 108mm.
Total length: 184mm.
Weight: 108g.
Lock: Liner Lock with Auto-closure LAWKS
Clip: removable and reversible stainless steel
Sheath: -
Packaging: cardboard box with logos CRKT
Notes: design by Kit Carson

Intended Use: Tactical

Type of production: industrial
Blade: stainless steel CPM-S30V
Treatment Lama: -
Production Lama USA
Handle material: G10
Blade length: 75mm.
Blade Thickness: 3mm.
Closed Length: 75mm
Total length: 175mm.
Balance: -
Weight: 110g.
Lock: Liner Lock
Clip: Stainless Steel
Sheath: -

LoneWolf - Loveless Clip Point Folder - knife

Intended use: Sport

Type of production: Industrial
Production Blade: Italy
Blade: 154CM stainless steel
Treatment Blade: -
Handle: Micarta
Blade length: 75mm.
Blade thickness: 3mm.
Length closed: -
Overall length: 190mm.
Thick when closed: -
Balancing: -
Weight: 128g.
Lock: Liner Lock
Clip: -
Sheath: Leather
Packaging: cardboard box with logos Lonewolf
Notes: Design by Loveless

Rockstead - About HPC - knife

With the brand Rockstead, Ishida Co. in Sakai, Japan, are currently marketed the best industrial knives currently in production.

Created by Katsumi Kitano, who for over 20 years has been producing quality knives so as to have been awarded the highest honor among the artisan knife makers in Japan, proved to be exceptional in cutting capacity, penetration and sealing wire is at the level of innovation for materials and construction techniques.

Blade: stainless Hitachi YXR7 to 64.8HRC coverage HPC 3micron - Hv1800
Handle material: Duralumin A2024 with anodized surface to HV400 and skin of Breed
Blade length: 82 mm.
Blade Thickness: 4 mm.
Overall length: 189 mm.
Weight: 100 g.
Lock: Liner Lock 402J2 steel at 52HRC
Clip: 402J2 steel at 48HRC
Notes: Accompanied by a certificate of guarantee with the technical specifications.