Knives, collection knife, tactical knives, outdoor knives, pocket knives and tools

Intended Use: Excursionism / Heavy Duty

Type of production: Handcrafted
Country of Production: Italy
Blade: D2 steel at 59/61HRC
Blade Finish: Raw Finish
Handle: Micarta
Blade Length: 180mm.
Blade thickness: 6.5mm.
Total length: 340mm.
Balance: backward
Weight: 729g.
Sheath: made of Kydex, thermoformed, with MOLLE-compatible belt oaxant
Packaging: warranty certificate
Notes: Each knife is unique and handcrafted in every part

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: In very good condition
* Commercially available Discontinued
* Sharpening: Factory
* Marks on blade: -
* Marks on handle: - -
* Box: marketed in silk pouch.
* Scabbard: Leather, belt, original, with a few small marks given by time.
* Manuals, Certificates and Warranties: present.
* Checked and Certified by our in-house laboratory



The HIGO-MH-DLC folder features a 3.5-inch YXR7 blade with DLC coating and Micarta handle. The incredible mirror finish is achieved by heat treating the blade and gradually grinding by hand with wet and dry sandpaper of 400, 600, 800, 1,200 and 2,000. The HIGO-MH-DLC comes with a black leather belt case with a slot to hold the included torx wrench.

Country of manufacture: Japan
Type of manufacture: midtech
Blade: DLT571 steel (Hitachi YXR7 at 64.1HRC with 3micron HPC coating and hardness of Hv1300)
Handle: 2mm stainless steel sus402J2 at 52HRC with micarta handles
Blade length: 90mm.
Blade thickness: 3.5mm.
Total length: 216mm.
Weight: 139g.
Closure: Liner Lock
Clip: stainless steel
Notes: Serial number 303 - 2010 knife accompanied by warranty certificate with technical specifications - Model discontinued and no longer commercially available

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Like new
* Commercially available Discontinued
* Sharpening: Factory
* Marks on blade: None
* Marks on handle: None
* Box: Present
* Scabbard: -
* Manuals, Certificates and Warranties: Present
* Checked and Certified by our in-house laboratory.


The best industrial knives currently in production are marketed under the Rockstead brand. Created by Katsumi Kitano, who has been making quality knives for more than 20 years to the extent that he has been awarded the highest distinction among artisan knife makers in Japan, they prove to be exceptional both in cutting ability, penetration and edge-holding and in the level of innovation for the materials used and construction techniques.

Country of production: Japan
Type of production: midtech
Blade: Hitachi YXR7 steel at 64.8HRC with 3micron HPC coverage and hardness of Hv1800
Handle: Duralumin A2024 with surface anodizing and hardness of Hv400
Blade length: 90mm.
Blade thickness: 3.5mm.
Total length: 215mm.
Weight: 130g.
Closure: Frame Lock with SKD11 casement at 61HRC
Clip: made of 402J2 steel at 48HRC
Notes: Serial number 005 - 2010 knife accompanied by warranty certificate with technical specifications - Model discontinued and no longer commercially available

The Smilodon, commonly known as the saber-toothed tiger, was an extinct large feline that lived during the Pleistocene, between 2.5 million and 10,000 years ago. It was a member of the felid family and was distinguished by its unique features, particularly its huge saber-shaped upper canines.

The Smilodon was larger than present-day tigers, with a length of about 1.6-1.8 meters and a height at withers of about 1 meter. Its weight could range from 200 to 400 kilograms. The Smilodon's most distinctive feature were its upper canines, which could reach a length of more than 20 centimeters. These canines were extremely sharp and adapted for grasping and stinging prey. Smilodon is believed to have been a specialized predator, hunting large mammals such as Pleistocene herbivores. Its hunting technique was probably based on a powerful pounce and the use of its canines to maul the throat of prey. It is likely that its powerful bite was capable of severely damaging the bones of its victims.

Despite its impressive appearance, Smilodon was not closely related to present-day tigers, but represented a separate evolutionary branch. It is thought to have become extinct due to climate change and the disappearance of its main prey at the end of the Pleistocene.


Exclusive knife in entirely handmade "Smoke Gray" coloration, part of a batch of products made especially for the Atlanta 2023 Blade Show.

Intended Use: Excursionism / Heavy Duty

Type of production: Handcrafted
Country of production: Italy
Blade: D2 steel at 59/60HRC
Blade finish: Smoke Gray
Handle: Micarta
Blade Length: 190mm.
Blade thickness: 6.5mm.
Total length: 365mm.
Balance: backward
Weight: 682g.
Sheath: made of Kydex, thermoformed
Packaging: unpacked - supplied with certificate of originality and Wander Tactical warranty
Notes: This knife is part of an exclusive batch of knives made entirely by hand and customized one by one designed for the Atlanta 2023 Blade Show.

Exclusive knife in entirely handmade "Comix" coloration, part of a batch of products made especially for the Atlanta 2023 Blade Show.

"Comix" type coloring refers to a coloring technique used in comic books and illustrations that is inspired by the style of traditional comic books. This style of coloring often features flat, bright colors with sharp edges between different shades. Some hallmarks of comix-type coloring include:

Flat backgrounds: Areas of solid color are applied without shading or complex tonal gradations. This gives a more "clean" and stylized look to the image.

Sharp edges: The borders between different shades of color are often marked by black or dark contour lines. These lines define the boundaries of the various elements in the image and accentuate the contrast between the different colors.

Bright colors: In comix-type coloring, bright, saturated colors are often used to create visual impact. These colors can be used to distinguish characters or to emphasize certain elements of the image.

Simplified shading: Although comix-type coloring may include shadows and highlights to add depth, these are often simplified compared to other coloring techniques. Shadows may be represented by areas of darker color or simple lines or brush strokes.

Graphic effects: Some elements of graphic effects, such as dots or speed lines, can be used to accentuate action or movement in illustrations.


Intended Use: Collection

Type of production: Handcrafted
Country of production: Italy
Blade: D2 steel at 59/60HRC
Blade treatment: "Comix" coloring, entirely made and painted by hand
Handle: Micarta
Blade length: 180mm.
Blade thickness: 5.5mm.
Total length: 315mm.
Balance: advanced
Weight: 393g.
Sheath: made of kydex, multi-position, with belt hooks and MOLLE compatible
Packaging: unpacked - comes with certificate of originality and Wander Tactical warranty
Notes: This knife is part of an exclusive batch of knives made entirely by hand and customized one by one designed for the Atlanta 2023 Blade Show.

Intended use: Hiking / Heavy Duty

Type of production: Artisanal
Country of production: Italy
Blade: D2 steel at 59/60HRC
Blade Finish: Black Blood
Handle: Micarta
Blade length: 190mm.
Blade thickness: 6.5mm.
Total length: 365mm.
Balance: backwards
Weight: 682g.
Sheath: in Kydex, thermoformed
Packaging: Certificate of guarantee
Notes: Each knife is unique and handcrafted in every part

Intended Use: Collection / Heavy Duty

Production type: Handcrafted
Country of Production: Italy
Blade: D2 steel at 59/61HRC with cryogenic hardening
Blade treatment: Black Blood
Handle: 2mm titanium folders with micarta handle
Blade length: 93mm.
Blade thickness: 5mm.
Length closed: 124mm.
Total length: 214mm.
Thickness when closed: 21mm.
Weight: 186g.
Opening: Carson Flipper system / Ambidextrous opening pins on blade.
Closure: Rockers Arm 8.11
Clip: stone washed titanium, removable and reversible
Packaging: plastic pouch with Wander Tactical logos
Notes: Limited Edition, produced entirely by hand, each example differs from the previous one in aesthetic finishes

KNIFE WITHDRAWAL FROM A PRIVATE COLLECTION
* Type: Previously purchased
* Conditions: Like new
* Commercially available: Discontinued, model dating back to 2019
* Sharpening: Factory
* Marks on blade: No
* Marks on the handle: No
* Box: WT original packaging
* Sheath: -
* Manuals, Certificates and Warranties: WT certificate
* Checked and certified by our internal laboratory

Intended use: Collection / Heavy Duty

Type of production: Artisan
Country of production: Italy
Blade: in D2 steel at 59 / 61HRC with cryogenic hardening
Blade treatment: Raw
Handle: 2mm titanium folders with micarta handle
Blade length: 93mm.
Blade thickness: 5mm.
Closed length: 124mm.
Total length: 214mm.
Thick when closed: 21mm.
Weight: 186g.
Opening: Carson Flipper system / Ambidextrous opening pins on the blade
Closing: Rockers Arm 8.11
Clip: in stone washed titanium, removable and reversible
Packaging: Plastic case with Wander Tactical logos
Notes: Limited Edition, produced entirely by hand, each piece differs from the previous one in aesthetic finishes

Intended Use: Excursionism / Heavy Duty

Type of production: Handcrafted
Country of Production: Italy
Blade: D2 steel at 59/60HRC
Blade Finish: Row Finish
Handle: Micarta
Blade Length: 180mm.
Blade thickness: 6.5mm.
Total length: 340mm.
Balance: backward
Weight: 605g.
Sheath: Kydex
Packaging: warranty certificate
Notes: Each knife is unique and handcrafted in every part

NOTE - "one of a kind" knife, featuring an entirely handcrafted blade with dual finish: Raw and Satin

Intended Use: Heavy Duty / Hiking / Tactical / Collection

Type of production: Midtech (handcrafted blade and handle - industrial folders)
Country of Production: Italy
Blade: D2 steel at 59/61HRC with cryogenic hardening
Blade treatment: Raw and Satin
Handle: titanium folders with micarta handle
Blade length: 90mm.
Blade thickness: 5mm.
Length closed: 120mm.
Total length: 210mm.
Weight: 150g.
Opening: Carson Flipper system / ambidextrous opening pins on the blade
Washers: steel, with ball bearings made in Japan
Closure: Rockers Arm 8.11
Clip: stainless steel, removable and reversible
Packaging: plastic case with Wander Tactical logos
Notes: "one of a kind" knife

Dino Picco, knife maker and lead designer of Wander Tactical, has created an entirely hand-made limited series of prototypes, in just 10 specimens all different from each other, of the new Centuria fixed blade model that smoothly blends the typical design together. of ancient Roman daggers with iconic American World War II combat knives.

Intended use: Collection

Type of production: Artisan
Country of production: Italy
Blade: D2 steel at 59 / 60HRC
Blade treatment: Raw
Handle: Micarta
Blade length: 180mm.
Blade thickness: 5.5mm.
Total length: 315mm.
Balancing: advanced
Weight: 393g.
Sheath: in kydex, multi-position, with belt hooks and MOLLE compatible
Packaging: unpacked - supplied with certificate of originality and Wander Tactical guarantee
Notes: This knife is part of an exclusive batch of handcrafted prototypes produced only in 10 pieces. Each knife is serialized on the blade and is characterized by different finishes, processes, bevels and grindings that make the 10 pieces all completely different from each other.

Knife withdrawn from private collection - Overall in excellent condition, still with factory sharpening, a few small signs of oxidation - Distinguished by Copper Brush finish, not usual to find on Wander models and very rare ivory white G-10 handle - Checked and certified by our in-house laboratory.

Type of Production: Handcrafted
Country of Production: Italy
Blade: D2 steel at 59/60HRC
Blade Finish: Copper Brush
Handle: G-10
Blade Length: 180mm.
Blade thickness: 6.5mm.
Total length: 340mm.
Balance: backward
Weight: 605g.
Sheath: made of Kydex, thermoformed, with Tek-Lok type attachment
Packaging: -
Notes: supplied with certificate of authenticity and warranty dated 12/20/2020 - knife withdrawn from private collection, overall in excellent condition

Knife withdrawn from a private collection in excellent condition, re-sharpened - Complete with original certificate - Checked and certified by our in-house Coltelleria Collini laboratory.

Type of production: Artisan
Production Lama: Italy
Blade: in D2 steel at 59 / 60HRC
Blade treatment: Row Finish
Handle: Micarta
Blade length: 180mm.
Blade thickness: 6.5mm.
Total length: 340mm.
Balancing: set back
Weight: 605g.
Sheath: in Kydex, thermoformed, with Tek-Lok type attachment
Packaging: -
Note:

Intended use: Heavy Duty / Hiking / Tactical / Collection

Production type: industrial
Country of production: Italy
Blade: D2 steel at 59/61HRC with cryogenic hardening
Blade treatment: Black DLC
Handle: Titanium folders with micarta grip
Blade length: 90mm.
Blade thickness: 5mm.
Length closed: 120mm.
Total lenght: 210mm.
Thickness when closed: 13,6mm.
Weight: 164g.
Closure: Rockers Arm 8.11 with additional screw safety pin, removable
Clip: Titanium, removable and reversible
Package: Plastic box with Wander Tactical logos, warranty certificate, safety pin
Notes: 4th generation, production 2021 

Dino Picco, knife maker and lead designer of Wander Tactical, has created an entirely hand-made limited series of prototypes, in just 10 specimens, all different from each other, of the new Centuria fixed blade model that smoothly blends the typical design together. of ancient Roman daggers with iconic American World War II combat knives.

Intended use: Collection

Type of production: Artisan
Country of production: Italy
Blade: in D2 steel at 59 / 60HRC
Blade treatment: Raw
Handle: Micarta
Blade length: 180mm.
Blade thickness: 5.5mm.
Total length: 315mm.
Balancing: advanced
Weight: 393g.
Sheath: in kydex, multi-position, with belt hooks and MOLLE compatible
Packaging: unpacked - supplied with certificate of originality and Wander Tactical guarantee
Notes: This knife is part of an exclusive lot of handcrafted prototypes produced only in 10 pieces. Each knife is serialized on the blade and is characterized by different finishes, processes, bevels and grindings that make the 10 pieces all completely different from each other.

Dino Picco, knife maker and lead designer of Wander Tactical, has created an entirely handmade limited edition of prototypes, in only 10 pieces all different from each other, of the new fixed blade model Centuria that smoothly blends together the typical design of the ancient Roman daggers with the iconic American combat knives of World War II.

Intended Use: Collection

Type of production: Artisan
Country of Production: Italy
Blade: D2 steel at 59/60HRC
Blade Treatment: Raw
Handle: Micarta
Blade length: 180mm.
Blade thickness: 5.5mm.
Total length: 315mm.
Balance: Advanced
Weight: 393g.
Sheath: in kydex, multi-position, with belt hooks and MOLLE compatible.
Package: unpacked - supplied with certificate of originality and warranty Wander Tactical
Notes: This knife is part of an exclusive batch of handmade prototypes produced only in 10 pieces. Each knife is serialized on the blade and is characterized by different finishes, machining, bevelling and grinding that make the 10 examples all completely different from each other.

Dino Picco, knife maker and lead designer of Wander Tactical, has created an entirely handmade limited edition of only 10 different prototypes of the new Centuria fixed blade model that smoothly blends together the typical design of ancient Roman daggers with the iconic American combat knives of World War II.

Intended Use: Collection

Type of production: Artisan
Country of Production: Italy
Blade: D2 steel at 59/60HRC
Blade Treatment: Raw
Handle: Micarta
Blade length: 180mm.
Blade thickness: 5.5mm.
Total length: 315mm.
Balance: Advanced
Weight: 393g.
Sheath: in kydex, multi-position, with belt hooks and MOLLE compatible.
Package: unpacked - supplied with certificate of originality and warranty Wander Tactical
Notes: This knife is part of an exclusive batch of handmade prototypes produced only in 10 pieces. Each knife is serialized on the blade and is characterized by different finishes, machining, bevelling and grinding that make the 10 examples all completely different from each other.

Dino Picco, knife maker and lead designer of Wander Tactical, has created a limited edition of only 10 different prototypes of the new fixed blade model Centuria, which smoothly blends together the typical design of ancient Roman daggers with the iconic American combat knives of World War II.

Intended Use: Collection

Type of production: Custom
Country of Production: Italy
Blade: D2 steel at 59/60HRC
Blade Treatment: Raw
Handle: Micarta
Blade length: 180mm.
Blade thickness: 5.5mm.
Total length: 315mm.
Balance: Advanced
Weight: 393g.
Sheath: in kydex, multi-position, with belt hooks and MOLLE compatible.
Package: unpacked - supplied with certificate of originality and warranty Wander Tactical
Notes: This knife is part of an exclusive batch of handmade prototypes produced only in 10 pieces. Each knife is serialized on the blade and is characterized by different finishes, machining, bevelling and grinding that make the 10 examples all completely different from each other.

Intended Use: Collection / Heavy Duty

Kind of production: Handmade
Country of Production: Italy
Blade: D2 steel at 59/61HRC with cryogenic hardening
Blade treatment: Raw
Handle: 2mm titanium folder with micarta handle
Blade length: 95mm.
Blade thickness: 5mm.
Length closed: 124mm.
Total lenght: 214mm.
Thickness when closed: 24mm.
Weight: 193g.
Opening: Carson Flipper system / Ambidextrous opening pins on the blade.
Closure: Rockers Arm 8.11
Clip: titanium stone washed, removable and reversible
Package: Plastic case with Wander Tactical logos
Notes: Limited Edition, entirely hand made, each piece is different from the previous one for aesthetic finishing.

Intended Use: Collection / Heavy Duty

Kind of production: Handmade
Country of Production: Italy
Blade: D2 steel at 59/61HRC with cryogenic hardening
Blade treatment: Raw
Handle: 2mm titanium folder with micarta handle
Blade length: 95mm.
Blade thickness: 5mm.
Length closed: 124mm.
Total lenght: 214mm.
Thickness when closed: 24mm.
Weight: 193g.
Opening: Carson Flipper system / Ambidextrous opening pins on the blade.
Closure: Rockers Arm 8.11
Clip: titanium stone washed, removable and reversible
Package: Plastic case with Wander Tactical logos
Notes: Limited Edition, entirely hand made, each piece is different from the previous one for aesthetic finishing.

Intended use: Heavy Duty / Hiking / Tactical / Collection

Type of production: industrial
Country of production: Italy
Blade: in D2 steel at 59 / 61HRC with cryogenic tempering
Blade treatment: Black
Handle: titanium folders with aluminum handle
Blade length: 90mm.
Blade thickness: 5mm.
Closed length: 120mm.
Total length: 210mm.
Thick when closed: 13.6mm.
Balancing: -
Weight: 160g.
Opening: Carson Flipper system / ambidextrous opening pins on the blade
Washers: in steel, with ball bearings made in Japan
Closing: Rockers Arm 8.11
Clip: titanium, removable and reversible
Sheath: -
Packaging: Plastic case with Wander Tactical logos
Notes: 3rd generation 2019 production

Type of production: Artisan
Production Lama: Italy
Blade: in D2 steel at 59 / 60HRC
Blade treatment: Black Blood
Handle: Green Paracord
Head Size: 90mm (cutting edge) x 208mm
Thickness: 6.5mm.
Total length: 370mm.
Balancing: advanced
Weight: 943g. (1.080g. With scabbard)
Sheath: in Kydex, thermoformed
Packaging: -
Note:

Japanese steel blends with Italian excellence

For this 2019/2020 collaboration, exclusive of Collini Cutlery, we have decided to propose a series of best sellers produced by Wander Tactical. Knives made with the famous San Mai steel produced by the Japanese Takefu Steel. Specifically, we used V-Toku2 carbonaceous at 62 / 63HRC for the central plate and SUS410 stainless steel for the two external plates, in order to guarantee a very high cutting capacity, penetration and sealing of the wire together with an easy regrinding and maintenance but at the same time the blade has a remarkable resistance to corrosion and an important increase in resilience given by the type of external steel and by the laminated structure.

RAPTOR model:

Use: Tactical / Utility

Type of production: Artisan
Production Lama: Italy
Blade: integral, laminated Japanese steel (San Mai) with V-Toku2 (carbonaceous) cutting edge at 62 / 63HRC and SUS410 (stainless steel) external scales
Blade finish: satin finish
Handle: Paracord
Blade length: 75mm.
Blade thickness: 6.5mm.
Total length: 178mm.
Balancing: set back
Weight: 149g.
Sheath: in brown kydex
Packaging: -
Notes: Each knife is unique and handcrafted - Wander Tactical certified

As in the ancient Japanese Samurai swords.

The rolled steel - imported into Italy by Collini Steel directly from the Japanese Takefu Steel - is based on the ancient Japanese tradition in the creation of the famous Samurai swords. In fact, as early as 1100 the expert Japanese blacksmiths combined different materials together to give the Katana swords incredible cutting abilities combined with a resistance and flexibility previously unknown. It is thanks to this revolutionary construction technique that Samurai swords have been preserved to this day, becoming one of the most fascinating objects made by man. Following this tradition applied to modern metallurgy, today we are able to have technologically advanced steels already tested and used in cutlery also by famous brands such as Fallkniven, Cold Steel, Mcusta, Kai, Sog, Zwilling, Rockstead, etc.

Characteristics of San Mai steel: These are different types of metals bonded together to create a composite that encloses and intensifies the strengths of the metals individually taken:

- Longer life of the cutting edge

thanks to the use of very high quality steels with high carbon content (VG10, CoS, Shiro) or sintered (SPG2), in the heart of the sheet (Core Steel), the blade, once hardened, achieves decidedly hardness and cutting performance higher than those achieved with the use of traditional steels.

- Greater resilience
built on the principle of Japanese swords, multilayer steel is difficult to break thanks to the toughness of the central steel (Core Steel) and the elasticity of the steel used for the side facing (Stainless Steel).

- Better corrosion resistance
the steel used for the external layers (Stainless Steel) guarantees the blade a high resistance to corrosion. The combination of the two or more materials used by Takefu Steel generates, on a galvanic level, a structure that improves corrosion resistance even on the wire.

- Easy processing even after heat treatment
although the steel normally becomes harder after hardening, the side steel used in multilayer processing does not lose its softness and allows easy processing, drilling or welding even after heat treatment. For an optimal performance of the blade, cryogenic treatment is recommended.

- Improvement of the aesthetic result
The knives made with multi-state steel or damascus pattern at the end of the processing are aesthetically elegant, refined and highly appreciated by collectors all over the world.

For more information: collinisteel

Japanese steel blends with Italian excellence

For this 2019/2020 collaboration, exclusive of Collini Cutlery, we have decided to propose a series of best sellers produced by Wander Tactical. Knives made with the famous San Mai steel produced by the Japanese Takefu Steel. Specifically, we used V-Toku2 carbonaceous at 62 / 63HRC for the central plate and SUS410 stainless steel for the two external plates, in order to guarantee a very high cutting capacity, penetration and sealing of the wire together with an easy regrinding. and maintenance but at the same time the blade has a remarkable resistance to corrosion and an important increase in resilience given by the type of extrene steel and by the laminated structure.

RAPTOR model:

Use: Tactical / Utility

Type of production: Artisan
Production Lama: Italy
Blade: integral, laminated Japanese steel (San Mai) with V-Toku2 (carbonaceous) cutting edge at 62 / 63HRC and SUS410 (stainless steel) external scales
Blade finish: satin finish
Handle: Paracord
Blade length: 75mm.
Blade thickness: 6.5mm.
Total length: 178mm.
Balancing: set back
Weight: 149g.
Sheath: in green kydex
Packaging: -
Notes: Each knife is unique and handcrafted - Wander Tactical certified

As in the ancient Japanese Samurai swords.

The rolled steel - imported into Italy by Collini Steel directly from the Japanese Takefu Steel - is based on the ancient Japanese tradition in the creation of the famous Samurai swords. In fact, as early as 1100 the expert Japanese blacksmiths combined different materials together to give the Katana swords incredible cutting abilities combined with a resistance and flexibility previously unknown. It is thanks to this revolutionary construction technique that Samurai swords have been preserved to this day, becoming one of the most fascinating objects made by man. Following this tradition applied to modern metallurgy, today we are able to have technologically advanced steels already tested and used in cutlery also by famous brands such as Fallkniven, Cold Steel, Mcusta, Kai, Sog, Zwilling, Rockstead, etc.

Characteristics of San Mai steel: These are different types of metals bonded together to create a composite that encloses and intensifies the strengths of the metals individually taken:

- Longer tool life

thanks to the use of very high quality steels with high carbon content (VG10, CoS, Shiro) or sintered (SPG2), in the heart of the sheet (Core Steel), the blade, once hardened, achieves decidedly hardness and cutting performance higher than those achieved with the use of traditional steels.

- Greater resilience
built on the principle of Japanese swords, multilayer steel is difficult to break thanks to the toughness of the central steel (Core Steel) and the elasticity of the steel used for the side facing (Stainless Steel).

- Better corrosion resistance
the steel used for the external layers (Stainless Steel) guarantees the blade a high resistance to corrosion. The combination of the two or more materials used by Takefu Steel generates, on a galvanic level, a structure that improves corrosion resistance even on the wire.

- Easy processing even after heat treatment
although the steel normally becomes harder after hardening, the side steel used in multilayer processing does not lose its softness and allows easy processing, drilling or welding even after heat treatment. For an optimal performance of the blade, cryogenic treatment is recommended.

- Improvement of the aesthetic result
The knives made with multi-state steel or with a damask pattern at the end of the processing are aesthetically elegant, refined and highly appreciated by collectors all over the world.

For more information: collinisteel

Japanese steel merges with Italian excellence

For this 2019/2020 collaboration, exclusive to Collini Cutlery, we have decided to offer a series of best sellers produced by Wander Tactical. Knives made with the famous San Mai steel produced by the Japanese Takefu Steel. Specifically, for the central sheet we used the carbonaceous V-Toku2 at 62 / 63HRC and the stainless SUS410 for the two external sheets, in order to guarantee a very high cutting, penetration and sealing capacity of the wire together with an ease of regrinding and maintenance but at the same time the blade has a remarkable resistance to corrosion and an important increase in resilience given by the type of foreign steel and the laminated structure.

SCRAMBLER Model .:

Occupation: Tactical / Utility

Type of production: Artisan
Lama production: Italy
Blade: integral, in Japanese laminated steel (San Mai) with cutting edge in V-Toku2 (carbon) at 62 / 63HRC and external cheeks in SUS410 (stainless steel)
Blade finish: satin finish
Handle: Micarta
Blade length: 95mm.
Blade thickness: 6.5mm.
Total length: 210mm.
Balancing: backward
Weight: 212g.
Sheath: brown kydex
Packaging: -
Notes: Each knife is unique and handcrafted - Wander Tactical certified

As in the ancient swords of the Japanese Samurai.

Rolled steel - imported into Italy from Collini Steel directly from the Japanese Takefu Steel - is based on the ancient Japanese tradition in the creation of the famous Samurai swords. Already in 1100 the expert Japanese blacksmiths in fact combined different materials to give the Katana swords incredible cutting capabilities combined with a resistance and flexibility previously unknown. It is thanks to this revolutionary construction technique that the swords from Samurai have been preserved to the present day becoming one of the most fascinating objects made by man. Following this tradition applied to modern metallurgy, we are now able to have technologically advanced steels already tested and used in cutlery also by famous brands such as Fallkniven, Cold Steel, Mcusta, Kai, Sog, Zwilling, Rockstead, etc.

Characteristics of San Mai steel: These are different types of metals bonded together to create a composite that encloses and intensifies the strengths of the metals taken individually:

- Longer tool life
thanks to the use of high quality steel with a high carbon content (VG10, CoS, Shiro) or sintered (SPG2), in the heart of the sheet (Core Steel), the blade once hardened, achieves hardness and cutting performance decidedly higher than those achieved with the use of traditional steels.

- Greater resilience
built with the principle of Japanese swords, multilayer steel is difficult to break thanks to the toughness of the central steel (Core Steel) and the elasticity of the steel used for the lateral coating (Stainless Steel).

- Better corrosion resistance
the steel used for the external layers (Stainless Steel) guarantees the blade a high resistance to corrosion. The combination of the two or more materials used by Takefu Steel generates, at the galvanic level, a structure that improves the corrosion resistance also on the wire.

- Easy processing even after heat treatment
although normally the steel becomes harder after hardening, the lateral steel used in multi-layer processing does not lose its softness and allows easy processing, drilling or welding even after heat treatment. For optimum performance of the blade, cryogenic treatment is recommended.

- Improvement of the aesthetic result
The knives made with multistate steel or with a damask pattern at the end of the processing are aesthetically elegant, refined and highly appreciated by collectors all over the world.

For more information: collinisteel

Japanese steel merges with Italian excellence

For this 2019/2020 collaboration, exclusive to Collini Cutlery, we have decided to offer a series of best sellers produced by Wander Tactical. Knives made with the famous San Mai steel produced by the Japanese Takefu Steel. Specifically, for the central sheet we used the carbonaceous V-Toku2 at 62 / 63HRC and the stainless SUS410 for the two external sheets, in order to guarantee a very high cutting, penetration and sealing capacity of the wire together with an ease of regrinding and maintenance but at the same time the blade has a remarkable resistance to corrosion and an important increase in resilience given by the type of foreign steel and the laminated structure.

RAPTOR model:

Occupation: Tactical / Utility

Type of production: Artisan
Lama production: Italy
Blade: integral, in Japanese laminated steel (San Mai) with cutting edge in V-Toku2 (carbon) at 62 / 63HRC and external cheeks in SUS410 (stainless steel)
Blade finish: satin finish
Handle: Paracord
Blade length: 75mm.
Blade thickness: 6.5mm.
Total length: 178mm.
Balancing: backward
Weight: 136g.
Sheath: black kydex
Packaging: -
Notes: Each knife is unique and handcrafted - Wander Tactical certified

As in the ancient swords of the Japanese Samurai.

Rolled steel - imported into Italy from Collini Steel directly from the Japanese Takefu Steel - is based on the ancient Japanese tradition in the creation of the famous Samurai swords. Already in 1100 the expert Japanese blacksmiths in fact combined different materials to give the Katana swords incredible cutting capabilities combined with a resistance and flexibility previously unknown. It is thanks to this revolutionary construction technique that the swords from Samurai have been preserved to the present day becoming one of the most fascinating objects made by man. Following this tradition applied to modern metallurgy, we are now able to have technologically advanced steels already tested and used in cutlery also by famous brands such as Fallkniven, Cold Steel, Mcusta, Kai, Sog, Zwilling, Rockstead, etc.

Characteristics of San Mai steel: These are different types of metals bonded together to create a composite that encloses and intensifies the strengths of the metals taken individually:

- Longer tool life
thanks to the use of high quality steel with a high carbon content (VG10, CoS, Shiro) or sintered (SPG2), in the heart of the sheet (Core Steel), the blade once hardened, achieves hardness and cutting performance decidedly higher than those achieved with the use of traditional steels.

- Greater resilience
built with the principle of Japanese swords, multilayer steel is difficult to break thanks to the toughness of the central steel (Core Steel) and the elasticity of the steel used for the lateral coating (Stainless Steel).

- Better corrosion resistance
the steel used for the external layers (Stainless Steel) guarantees the blade a high resistance to corrosion. The combination of the two or more materials used by Takefu Steel generates, at the galvanic level, a structure that improves the corrosion resistance also on the wire.

- Easy processing even after heat treatment
although normally the steel becomes harder after hardening, the lateral steel used in multi-layer processing does not lose its softness and allows easy processing, drilling or welding even after heat treatment. For optimum performance of the blade, cryogenic treatment is recommended.

- Improvement of the aesthetic result
The knives made with multistate steel or with a damask pattern at the end of the processing are aesthetically elegant, refined and highly appreciated by collectors all over the world.

For more information: collinisteel

Japanese steel merges with Italian excellence

For this 2019/2020 collaboration, exclusive to Collini Cutlery, we have decided to offer a series of best sellers produced by Wander Tactical. Knives made with the famous San Mai steel produced by the Japanese Takefu Steel. Specifically, for the central sheet we used the carbonaceous V-Toku2 at 62 / 63HRC and the stainless SUS410 for the two external sheets, in order to guarantee a very high cutting, penetration and sealing capacity of the wire together with an ease of regrinding and maintenance but at the same time the blade has a remarkable resistance to corrosion and an important increase in resilience given by the type of foreign steel and the laminated structure.

RAPTOR model:

Occupation: Tactical / Utility

Type of production: Artisan
Lama production: Italy
Blade: integral, in Japanese laminated steel (San Mai) with cutting edge in V-Toku2 (carbon) at 62 / 63HRC and external cheeks in SUS410 (stainless steel)
Blade finish: satin finish
Handle: Paracord
Blade length: 75mm.
Blade thickness: 6.5mm.
Total length: 178mm.
Balancing: backward
Weight: 136g.
Sheath: black kydex
Packaging: -
Notes: Each knife is unique and handcrafted - Wander Tactical certified

As in the ancient swords of the Japanese Samurai.

Rolled steel - imported into Italy from Collini Steel directly from the Japanese Takefu Steel - is based on the ancient Japanese tradition in the creation of the famous Samurai swords. Already in 1100 the expert Japanese blacksmiths in fact combined different materials to give the Katana swords incredible cutting capabilities combined with a resistance and flexibility previously unknown. It is thanks to this revolutionary construction technique that the swords from Samurai have been preserved to the present day becoming one of the most fascinating objects made by man. Following this tradition applied to modern metallurgy, we are now able to have technologically advanced steels already tested and used in cutlery also by famous brands such as Fallkniven, Cold Steel, Mcusta, Kai, Sog, Zwilling, Rockstead, etc.

Characteristics of San Mai steel: These are different types of metals bonded together to create a composite that encloses and intensifies the strengths of the metals taken individually:

- Longer tool life
thanks to the use of high quality steel with a high carbon content (VG10, CoS, Shiro) or sintered (SPG2), in the heart of the sheet (Core Steel), the blade once hardened, achieves hardness and cutting performance decidedly higher than those achieved with the use of traditional steels.

- Greater resilience
built with the principle of Japanese swords, multilayer steel is difficult to break thanks to the toughness of the central steel (Core Steel) and the elasticity of the steel used for the lateral coating (Stainless Steel).

- Better corrosion resistance
the steel used for the external layers (Stainless Steel) guarantees the blade a high resistance to corrosion. The combination of the two or more materials used by Takefu Steel generates, at the galvanic level, a structure that improves the corrosion resistance also on the wire.

- Easy processing even after heat treatment
although normally the steel becomes harder after hardening, the lateral steel used in multi-layer processing does not lose its softness and allows easy processing, drilling or welding even after heat treatment. For optimum performance of the blade, cryogenic treatment is recommended.

- Improvement of the aesthetic result
The knives made with multistate steel or with a damask pattern at the end of the processing are aesthetically elegant, refined and highly appreciated by collectors all over the world.

For more information: collinisteel

Japanese steel merges with Italian excellence

For this 2019/2020 collaboration, exclusive to Collini Cutlery, we have decided to offer a series of best sellers produced by Wander Tactical. Knives made with the famous San Mai steel produced by the Japanese Takefu Steel. Specifically, for the central sheet we used the carbonaceous V-Toku2 at 62 / 63HRC and the stainless SUS410 for the two external sheets, in order to guarantee a very high cutting, penetration and sealing capacity of the wire together with an ease of regrinding and maintenance but at the same time the blade has a remarkable resistance to corrosion and an important increase in resilience given by the type of foreign steel and the laminated structure.

SCRAMBLER Model .:

Occupation: Tactical / Utility

Type of production: Artisan
Lama production: Italy
Blade: integral, in Japanese laminated steel (San Mai) with cutting edge in V-Toku2 (carbon) at 62 / 63HRC and external cheeks in SUS410 (stainless steel)
Blade finish: satin finish
Handle: Micarta
Blade length: 95mm.
Blade thickness: 6.5mm.
Total length: 210mm.
Balancing: backward
Weight: 212g.
Sheath: brown kydex
Packaging: -
Notes: Each knife is unique and handcrafted - Wander Tactical certified

As in the ancient swords of the Japanese Samurai.

Rolled steel - imported into Italy from Collini Steel directly from the Japanese Takefu Steel - is based on the ancient Japanese tradition in the creation of the famous Samurai swords. Already in 1100 the expert Japanese blacksmiths in fact combined different materials to give the Katana swords incredible cutting capabilities combined with a resistance and flexibility previously unknown. It is thanks to this revolutionary construction technique that the swords from Samurai have been preserved to the present day becoming one of the most fascinating objects made by man. Following this tradition applied to modern metallurgy, we are now able to have technologically advanced steels already tested and used in cutlery also by famous brands such as Fallkniven, Cold Steel, Mcusta, Kai, Sog, Zwilling, Rockstead, etc.

Characteristics of San Mai steel: These are different types of metals bonded together to create a composite that encloses and intensifies the strengths of the metals taken individually:

- Longer tool life
thanks to the use of high quality steel with a high carbon content (VG10, CoS, Shiro) or sintered (SPG2), in the heart of the sheet (Core Steel), the blade once hardened, achieves hardness and cutting performance decidedly higher than those achieved with the use of traditional steels.

- Greater resilience
built with the principle of Japanese swords, multilayer steel is difficult to break thanks to the toughness of the central steel (Core Steel) and the elasticity of the steel used for the lateral coating (Stainless Steel).

- Better corrosion resistance
the steel used for the external layers (Stainless Steel) guarantees the blade a high resistance to corrosion. The combination of the two or more materials used by Takefu Steel generates, at the galvanic level, a structure that improves the corrosion resistance also on the wire.

- Easy processing even after heat treatment
although normally the steel becomes harder after hardening, the lateral steel used in multi-layer processing does not lose its softness and allows easy processing, drilling or welding even after heat treatment. For optimum performance of the blade, cryogenic treatment is recommended.

- Improvement of the aesthetic result
The knives made with multistate steel or with a damask pattern at the end of the processing are aesthetically elegant, refined and highly appreciated by collectors all over the world.

For more information: collinisteel

Limited and exclusive edition for the civilian market of the Hurricane Folder model made in only 10 numbered pieces and with the Logo of the amphibious fight instructors of the Lagunari (to whom it was supplied directly by the Wander Tactical). The model also features a partially serrated blade and DLC surface treatment.

Intended use: Heavy Duty / Hiking / Tactical / Collection

Type of production: industrial
Country of production: Italy
Blade: D2 steel at 59 / 61HRC with cryogenic hardening
Blade treatment: DLC Black
Handle: titanium briefcases with aluminum handle
Blade length: 90mm.
Blade thickness: 5mm.
Length closed: 120mm.
Total length: 210mm.
Thick when closed: 13.6mm.
Balancing: -
Weight: 160g.
Opening: Carson Flipper system / ambidextrous opening pins on the blade
Washers: in steel, with ball bearings made in Japan
Closing time: Rockers Arm 8.11
Clip: titanium, removable and reversible
Sheath: -
Packaging: Plastic packaging with Wander Tactical and Lagunari logos
Notes: Limited Edition with logo of the amphibious fight instructors of the Lagunari and number III generation production 2019

In collaboration with Wander Tactical we have decided to propose their heavy duty, the Smilodon model, in an exclusive satin blade version that uses the famous Japanese steel San Mai produced by Takefu Steel. Specifically, for the central plate we used the 61.5HRC CoS (Cobalt Special, mechanically considered 25% higher than the already highly appreciated VG10) and the 420J2 (at 56 HRC) for the two side plates in order to guarantee a very high cutting capacity, but at the same time a remarkable resistance to abrasion, resilience and oxidation resistance.

Type of production: Artisan
Lama production: Italy
Blade: integral, in Japanese rolled stainless steel (San Mai) with 61.5HRC CoS cutting in cryogenic quenching
Blade treatment: satin
Handle: Micarta
Blade length: 180mm.
Blade thickness: 6.5mm.
Total length: 340mm.
Balancing: set back
Weight: 605g.
Sheath: Kydex, thermoformed, with Tek-Lok type connection
Package: -
Notes: unique and exclusive piece.

Intended use: Heavy Duty / Hiking / Tactical / Collection

Type of production: industrial
Country of production: Italy
Blade: in D2 steel at 59 / 61HRC with cryogenic tempering
Blade treatment: Black
Handle: titanium folders with aluminum handle
Blade length: 90mm.
Blade thickness: 5mm.
Closed length: 120mm.
Total length: 210mm.
Thick when closed: 13.6mm.
Balancing: -
Weight: 160g.
Opening: Carson Flipper system / ambidextrous opening pins on the blade
Washers: in steel, with ball bearings made in Japan
Closing: Rockers Arm 8.11
Clip: titanium, removable and reversible
Sheath: -
Packaging: Plastic case with Wander Tactical logos
Notes: 3rd generation 2019 production

Intended use: Heavy Duty / Hiking / Tactical / Collection

Type of production: industrial
Country of production: Italy
Blade: in D2 steel at 59 / 61HRC with cryogenic tempering
Blade treatment: Stonwash
Handle: titanium folders with aluminum handle
Blade length: 90mm.
Blade thickness: 5mm.
Closed length: 120mm.
Total length: 210mm.
Thick when closed: 13.6mm.
Balancing: -
Weight: 160g.
Opening: Carson Flipper system / ambidextrous opening pins on the blade
Washers: in steel, with ball bearings made in Japan
Closing: Rockers Arm 8.11
Clip: titanium, removable and reversible
Sheath: -
Packaging: Plastic case with Wander Tactical logos
Notes: 3rd generation 2019 production

Intended use: Heavy Duty / Hiking / Tactical / Collection

Type of production: industrial
Country of production: Italy
Blade: in D2 steel at 59 / 61HRC with cryogenic tempering
Blade treatment: Stonwash
Handle: titanium folders with aluminum handle
Blade length: 90mm.
Blade thickness: 5mm.
Closed length: 120mm.
Total length: 210mm.
Thick when closed: 13.6mm.
Balancing: -
Weight: 160g.
Opening: Carson Flipper system / ambidextrous opening pins on the blade
Washers: in steel, with ball bearings made in Japan
Closing: Rockers Arm 8.11
Clip: titanium, removable and reversible
Sheath: -
Packaging: Plastic case with Wander Tactical logos
Notes: 3rd generation 2019 production

With the Rockstead brand of Ishida Co. of Sakai, Japan, the best industrial knives currently in production are currently marketed.

Created by Katsumi Kitano, who for over 20 years has been producing quality knives so as to have been awarded the highest recognition among artisan knives in Japan, they are exceptional both in cutting capacity, penetration and tightness of the thread and in innovation for the materials used and for construction techniques.

Intended use: Collection / Sports

Type of production: Midtech
Country of production: Sakai - Japan
Blade: ZDP189 stainless steel hardened to 66.5HRC
Blade treatment: mirror polished
Handle: titanium
Blade length: 90mm.
Blade thickness: 3mm.
Closed length: 120mm.
Total length: 216mm.
Thick when closed: 12.2mm.
Weight: 136g.
Opening: through ambidextrous pin
Washers: in brass
Closure: FrameLock with wing in SKD11 at 61HRC
Clip: removable, in 420J2 stainless steel with PVD treatment
Packaging: Wooden box with Rockstead logos, certified with serial number and steel hardness test
Notes: Serial number # 096 - Date of production 05 July 2019

With the Rockstead brand of Ishida Co. of Sakai, Japan, the best industrial knives currently in production are currently marketed.

Created by Katsumi Kitano, who for over 20 years has been producing quality knives so as to have been awarded the highest recognition among artisan knives in Japan, they are exceptional both in cutting capacity, penetration and hold of the thread and in innovation for the materials used and for construction techniques.

Intended use: Collection / Sports

Type of production: Midtech
Country of production: Sakai - Japan
Blade: ZDP189 stainless steel hardened to 66.4HRC
Blade treatment: mirror polished
Handle: anodised titanium and carbon fiber
Blade length: 89mm.
Blade thickness: 3mm.
Closed length: 120mm.
Total length: 216mm.
Thick when closed: 15.8mm.
Weight: 133g.
Opening: through ambidextrous pin
Washers: in steel
Closure: FrameLock with wing in SKD11 at 61HRC
Clip: removable, in 420J2 stainless steel with PVD treatment
Packaging: Wooden box with Rockstead logos, certified with serial number and steel hardness test
Notes: Serial number # 028 - Date of production April 23, 2019

Custom version of the standard Hurricane model - blade, folders, clips and screws modified by hand by the Wander Tactical knife designer Dino Picco

Type of production: semi-industrial
Lama production: Italy
Blade: in steel D2 at 59 / 60HRC
Lama treatment: Black Blood
Handle: Aluminum available in alluminium
Blade length: 90mm.
Blade thickness: 5mm.
Total length: 215mm.
Balancing: set back
Weight: 238g.
Package: -
Notes: clip, blade lock Rockers Arm 8.11 - safety pin

Single piece custom version of the standard Hurricane model - blade, folders, clips and screws modified by hand by the Wander Tactical knife designer Dino Picco - The finish of the "Bronze" blade is obtained through a natural oxidation process that takes place at the end of the hardening phase cryogenic.

Type of production: semi-industrial
Lama production: Italy
Blade: in steel D2 at 59 / 60HRC
Lama treatment: Bronze flow
Manicure: Aluminum (alluminium)
Blade length: 90mm.
Blade thickness: 5mm.
Total length: 215mm.
Balancing: set back
Weight: 187g.
Package: -
Notes: clip, blade lock Rockers Arm 8.11 - safety pin

In collaboration with Wander Tactical we have decided to propose their heavy duty, the Smilodon model, in an exclusive satin blade version that uses the famous Japanese steel San Mai produced by Takefu Steel. Specifically, for the central plate we used the 61.5HRC CoS (Cobalt Special, mechanically considered 25% higher than the already highly appreciated VG10) and the 420J2 (at 56 HRC) for the two side plates in order to guarantee a very high cutting capacity, but at the same time a remarkable resistance to abrasion, resilience and oxidation resistance.

Type of production: Artisan
Lama production: Italy
Blade: integral, in Japanese rolled stainless steel (San Mai) with 61.5HRC CoS cutting in cryogenic quenching
Blade treatment: satin
Handle: Micarta
Blade length: 180mm.
Blade thickness: 6.5mm.
Total length: 340mm.
Balancing: set back
Weight: 605g.
Sheath: Kydex, thermoformed, with Tek-Lok type connection
Package: -
Notes: unique and exclusive piece.

Intended use: Heavy Duty / Hiking / Tactical / Collection

Type of production: artisan blade and handle - industrial folders
Country of production: Italy
Blade: in D2 steel at 59 / 61HRC with cryogenic tempering
Blade treatment: Raw
Handle: titanium folders with micarta handle
Blade length: 90mm.
Blade thickness: 5mm.
Closed length: 120mm.
Total length: 214mm.
Thick when closed: -mm.
Balancing: -
Weight: 182g.
Opening: Carson Flipper system / ambidextrous opening pins on the blade
Washers: in steel, with ball bearings made in Japan
Closing: Rockers Arm 8.11
Clip: stainless steel, removable and reversible
Sheath: -
Packaging: Plastic case with Wander Tactical logos
Notes: Custom Edition unique piece

Article on reservation - available from December 15, 2017
 
Intended use: heavy duty / hiking / tactical / collection
Type of production: hand-made blade and handle - industrial titanium folders
Country of production: Italy
Blade: D2 steel at 59 / 61HRC with cryogenic hardening
Blade Treatment: Raw
Handle: titanium folding handles with micarta handle
Blade Length: 90mm.
Blade thickness: 5mm.
Closed length: 120mm.
Total length: 210mm.
Weight: 150g.
Opening: Carson Flipper system / bobbin opening pins on the blade
Washers: Steel, with ball bearings made in Japan
Closure: Rockers Arm 8.11
Clip: Stainless steel removable and reversible
Packing: Plastic case with Wander Tactical logos

Article on reservation - available from December 15, 2017
 
Intended use: heavy duty / hiking / tactical / collection
Type of production: hand-made blade and handle - industrial titanium folders
Country of production: Italy
Blade: D2 steel at 59 / 61HRC with cryogenic hardening
Blade Treatment: Raw
Handle: titanium folding handles with micarta handle
Blade Length: 90mm.
Blade thickness: 5mm.
Closed length: 120mm.
Total length: 210mm.
Weight: 150g.
Opening: Carson Flipper system / bobbin opening pins on the blade
Washers: Steel, with ball bearings made in Japan
Closure: Rockers Arm 8.11
Clip: Stainless steel removable and reversible
Packing: Plastic case with Wander Tactical logos

Article on reservation - available from December 15, 2017
 
Intended use: heavy duty / hiking / tactical / collection
Type of production: hand-made blade and handle - industrial titanium folders
Country of production: Italy
Blade: D2 steel at 59 / 61HRC with cryogenic hardening
Blade Treatment: Raw
Handle: titanium folding handles with micarta handle
Blade Length: 109mm.
Blade thickness: 5mm.
Closed length: 145mm.
Total length: 250mm.
Weight: 150g.
Opening: Carson Flipper system / bobbin opening pins on the blade
Washers: Steel, with ball bearings made in Japan
Closure: Rockers Arm 8.11
Clip: Stainless steel removable and reversible
Packing: Plastic case with Wander Tactical logos

Type of production: Artisan
Production Country: Italy
Blade: D2 steel at 59 / 60HRC
Blade Treatment: Black Blood
Manicure: Black Micarta
Head Size: 90mm (sharp) x 208mm
Thickness: 6.5mm.
Total Length: 370mm.
Balancing: advanced
Weight: 982g. (1.114g with sheath)
Sheath: in Kydex, thermoformed
Packing: -
Notes:

Use: EDC / Light Utility / All Round

Type of production: Artisan
Country of production: Italy
Blade: integral, D2 steel to 59 / 61HRC
Blade Treatment: Black Blood
Manicure: paracord woodland
Blade Length: 90mm.
Blade thickness: 6.5mm.
Total length: 200mm.
Balance: backward
Weight: 220g.
Sheath: in Kydex, thermoformed, compatible with tek-lok attachments (not supplied) or usable as neck knife
Packing: -
Notes: Each knife is unique and handcrafted; There may be differences in finishes, colors and materials compared to the photographed product

Unique piece custom version of the standard Hurricane model - blade, folders, clips and hardware modified by hand by the Wander Tactical knife designer Dino Picco

Type of production: semi-industrial
Lama production: Italy
Blade: in steel D2 at 59 / 60HRC
Lama treatment: Black Blood
Manicure: Aluminum (alluminium)
Blade length: 90mm.
Blade thickness: 5mm.
Total length: 215mm.
Balancing: set back
Weight: 187g.
Package: -
Notes: clip, blade lock Rockers Arm 8.11 - safety pin

This knife can still slice paper even after the punishment of striking and cutting dried bamboo.This knife has a beautiful convex surface with extreme sharpness.This is a flagship of the ROCKSTEAD folding knife collection. Both sides of the blade are convex. The blade is in the shape of the traditional Japanese sword. It cuts well and is strong. You can enjoy its strong cutting capabilities for a long time.

Full length: 213.00 mm
Blade length: 93.00 mm
Weight: 155 g
Thickness: 3.70 mm
Material: YXR7
Hardness: HRC65
Blade geometry: Honzukuri
Hard coating: DLC
Knives type: Folder

First folder presented by Wander Tactical

Type of production: semi-industrial
Country of production: Italy
Blade: D2 Steel 59 / 60HRC
Blade treatment: Black MIL-C 13924
Handle: aluminum
Blade length: 90mm.
Blade thickness: 5mm.
Overall length: 215mm.
Balancing: backward
Weight: 187g.
Sheath: -
Packaging: -
Notes: clip - blade lock Arm Rockers 8:11 - safety pin

First folder presented by Wander Tactical

Type of production: semi-industrial
Production Lama: Italy
Blade: D2 Steel 59 / 60HRC
Blade treatment: Black MIL-C 13924
Handle: aluminum available in three colors (black, green, alluminium)
Blade length: 90mm.
Blade thickness: 5mm.
Overall length: 215mm.
Balancing: backward
Weight: 187g.
Sheath: -
Packaging: -
Notes: clip - blade lock Arm Rockers 8:11 - safety pin

First folder presented by Wander Tactical

Type of production: semi-industrial
Country of production: Italy
Blade: D2 Steel 59 / 60HRC
Blade treatment: Black MIL-C 13924
Handle: aluminum
Blade length: 90mm.
Blade thickness: 5mm.
Overall length: 215mm.
Balancing: backward
Weight: 187g.
Sheath: -
Packaging: -
Notes: clip - blade lock Arm Rockers 8:11 - safety pin

Thought to be the ultimate survival tool, the Smilodon is remarkably well balanced and offers incredible cutting power on the timber thanks to its bevelled double-concave. In urban areas it can be used as breaching tool, but having regard to its ergonomics can also be employed to use less demanding and complex.

Use: Heavy Duty / Survival Tool

Type of production: handmade
Production Country: Italy
Blade: full tang in D2 steel, cryogenic treatment, to 59 / 61HRC
Blade treatment: row finish
Handle: Micarta
Blade length: 180 mm.
Blade thickness: 6 mm.
Overall length: 340 mm.
Balancing: slightly advanced than the guard branch
Weight: 595 g.
Sheath: Artisan, Kydex thermoformed, with Tek-Lok attack
Packaging: -
Notes: each knife is unique as it is handmade, there may therefore be slight differences compared with the photographed model, also with regard to shades of colors of blade and handle.

Rockstead - Higo-X-IW - Ironwood ZDP-189 - knife

With the brand Rockstead, Ishida Co. in Sakai, Japan, are currently marketed the best industrial knives currently in production.

Created by Katsumi Kitano, who for over 20 years has been producing quality knives so as to have been awarded the highest honor among the artisan knife makers in Japan, proved to be exceptional in cutting capacity, penetration and sealing wire is at the level of innovation for materials and construction techniques.

Blade: ZDP-189 in 66.8HRC
Handle material: stainless steel and wood SUS420J2 Ironwood
Blade length: 90 mm.
Blade Thickness: 3 mm.
Overall length: 215 mm.
Weight: 133g.
Lock: Frame Lock with swing SKD11 to 61HRC
Clip: 402J2 steel at 48HRC
Notes: Accompanied by a certificate of guarantee with the technical specifications.

Blade: Hitachi YXR7 64.8HRC steel with 3micron HPC cover - Hv1800
Handle: Duralumin A2024 with surface anodization at Hv400
Blade length: 90 mm.
Blade thickness: 3.5 mm.
Overall length: 215 mm.
Weight: 100 g.
Closing: Frame Lock with SKD11 to 61HRC
Clip: 402J2 steel to 48HRC
Notes: Accompanied by a certificate of guarantee with technical specifications.

Intended use: Collection / Sports

Type of production: Midtech
Country of production: Sakai - Japan
Blade: ZDP189 stainless steel hardened to 66.4HRC
Blade treatment: mirror polished
Handle: aluminum
Blade length: 90mm.
Blade thickness: 3mm.
Closed length: 120mm.
Total length: 216mm.
Thick when closed: 15.8mm.
Weight: 102g.
Opening: through ambidextrous pin
Washers: in steel
Closure: FrameLock with wing in SKD11 at 61HRC
Clip: removable, in 420J2 stainless steel with PVD treatment
Packaging: Wooden box with Rockstead logos, certified with serial number and steel hardness test
Notes: Serial number # 1039 - Date of production 31 May 2019