Knives, collection knife, tactical knives, outdoor knives, pocket knives and tools
-
Kasumi Japan - Sharpening stone - Grain 240/1000 - 80001 - knives accessories
The Kasumi 80001 combination whetstone with rough (240) and medium (1000) grit.
If your knife edge is in poor condition, start sharpening with the rough # 240 grit of the whetstone.
If your knife is in average condition, start with the # 1000 medium grit of the whetstone.
These two grits will keep your knives sharp enough for normal home use.
The whetstone comes with a hard rubber base for use when sharpening.
There is also a small abrasive stone to be used to grind the surface of the stone.
Dimensions:
length 175 x width 60 x height 25 mm - Weight: 635g.
Quality level: very highKJ80001 -
Takeshi Saji - Koinobori knife - red carp skin - PRIVATE COLLECTION - Craft Knife
Knife collected from a private collection in like new condition with original box - Knife made in 2017 by the famous Japanese knifemaker Takeshi Saji - The knife is supplied together with the sheath made by Saji, with an additional sheath made by the Italian cutler Simone Tonolli. This second sheath allows horizontal attachment to the belt. Checked and certified by our internal laboratory.
Takeshi Saji was born in 1948 in Takefu (Fukui prefecture), a city located roughly in the center of Japan and in the heart of an area for centuries devoted to the production of blades. His workshop is still there, built around the oven thanks to which, for several years now, Takeshi Saji has been forging steel (especially damascus) with which he makes various models of traditional Japanese knives. The choice of materials for the finishes (mainly natural), the essential lines - evocative of use - and the chromatic combinations of rare impact make his creations unique and unmistakable in the panorama of world cutlery and, at home, they have earned him the prestigious title of Master.
Intended use: Collection / Sports
Type of production: Artisan
Production Lama: Japan
Blade: Hand forged, Yoshoku laminated damask with Hitachi Aogami cutting edge at 64HRC
Blade treatment: -
Handle: Koinobori (carp) and Tou-Maki (rattan)
Blade length: 100mm.
Blade thickness: 4mm.
Closed Length: -
Total length: 207mm.
Thick when closed: -
Balancing: -
Weight: 128g.
Closure: -
Clip: -
Sheath: two leather sheaths, one produced by Takeshi Saji for vertical positioning and one made by the Italian knifemaker Simone Tonolli for horizontal fixing
Packaging: Cardboard box
Notes: entirely handmade by Takeshi SajiAP-TS-KOIR -
Kasumi Japan - Sharpening stone - Grain 3000/8000 - 80002 - knives accessories
Kasumi 80002 combination sharpening stone with fine (3000) and superfine (8000) grit. Excellent for giving your knives a razor sharpening.
The # 8000 grit was developed specifically for knives and knives made of special steels.
# 8000 grit is nearly the same grain and quality as a natural whetstone used to sharpen Japanese samurai swords.
With the right technique and experience, the # 3000 / # 8000 whetstone combination will give your knives a beautiful mirror edge, just like the edge of a samurai sword.
The whetstone comes with a hard rubber base for use when sharpening.
There is also a small abrasive stone to be used to grind the surface of the stone.
Dimensions:
length 175 x width 60 x height 25 mm - Weight: 635g.
Quality level: very highKJ80002 -
Takeshi Saji - Mikaduki knife 180 Green - Brown sheath - handmade knife
Takeshi Saji was born in 1948 in Takefu (Fukui prefecture), a city located roughly in the center of Japan and in the heart of an area for centuries devoted to the production of blades. His workshop is still there, built around the oven thanks to which, for several years now, Takeshi Saji has been forging steel (especially damascus) with which he makes various models of traditional Japanese knives. The choice of materials for the finishes (mainly natural), the essential lines - evocative of use - and the chromatic combinations of rare impact make his creations unique and unmistakable in the panorama of world cutlery and, at home, they have earned him the prestigious title of Master.
Intended use: Collection / Sports / Machete
Type of production: Artisan
Production Lama: Japan
Blade: Hand forged, laminated damask with 64HRC Hitachi Shirogami cutting edge
Blade treatment: -
Handle: Paracord Green
Blade length: 205mm.
Blade thickness: 5mm.
Closed Length: -
Total length: 335mm.
Thick when closed: -
Balancing: -
Weight: 358g.
Closure: -
Clip: -
Sheath: ** LEATHER **
Packaging: Cardboard box
Notes: entirely handmade by Takeshi SajiTS-MB180GM -
Takeshi Saji - Black Damascus Steak knife - SPG2 Damascus and Micarta - handmade knife
Takeshi Saji was born in 1948 in Takefu (Fukui prefecture), a city located roughly in the center of Japan and in the heart of an area for centuries devoted to the production of blades. His workshop is still there, built around the oven thanks to which, for several years now, Takeshi Saji has been forging steel (especially damascus) with which he makes various models of traditional Japanese knives. The choice of materials for the finishes (mainly natural), the essential lines - evocative of use - and the chromatic combinations of rare impact make his creations unique and unmistakable in the panorama of world cutlery and, at home, they have earned him the prestigious title of Maestro.
Intended use: table / sports / collection
Type of production: Artisan
Production Lama: Japan
Blade: Hand forged, laminated damascus with 15-layer SPG2 steel edge
Handle: in black G10
Blade length: 100mm.
Blade thickness: 2.5mm.
Total length: 240mm.
Weight: 80g.
Packaging: Cardboard box and leather sheath
Notes: The knife is handmade by Takeshi SajiTS-BDS-SPG2 -
Takeshi Saji - Folding Petty Knife - SPG2 Damascus and G10 - handmade knife
Takeshi Saji was born in 1948 in Takefu (Fukui prefecture), a city located roughly in the center of Japan and in the heart of an area for centuries devoted to the production of blades. His workshop is still there, built around the oven thanks to which, for several years now, Takeshi Saji has been forging steel (especially damascus) with which he makes various models of traditional Japanese knives. The choice of materials for the finishes (mainly natural), the essential lines - evocative of use - and the chromatic combinations of rare impact make his creations unique and unmistakable in the panorama of world cutlery and, at home, they have earned him the prestigious title of Maestro.
Intended use: sports / collection
Type of production: Artisan
Production Lama: Japan
Blade: Hand forged, laminated damascus with 15-layer SPG2 steel edge
Handle: in black G10
Blade length: 110mm.
Blade thickness: 2.5mm.
Total length: 235mm.
Weight: 120g.
Packaging: Cardboard box
Notes: The knife is handmade by Takeshi SajTS-FPK-SPG2 -
Takeshi Saji - Sakura Petty Rainbow Damascus - 135mm - kitchen knife
Takeshi Saji was born in 1948 in Takefu (Fukui prefecture), a city located roughly in the center of Japan and in the heart of an area for centuries devoted to the production of blades. His workshop is still there, built around the oven thanks to which, for several years now, Takeshi Saji forges steel (especially damascus) with which he makes various models of traditional Japanese knives. The choice of materials for the finishes (mainly natural), the essential lines - evocative of use - and the chromatic combinations of rare impact make his creations unique and unmistakable in the panorama of world cutlery and, at home, they have earned him the prestigious title of Master.
The blade is equipped with a central plate in Blue Steel carbon steel coated on the sides with layers of steel, brass and copper plates that help to increase the resistance to oxidation and resilience.
Once again, Master Saji has succeeded in creating an innovative new art style for his knives, combining the traditional "Sakura-Maki" handle and the striking rainbow Damascus blade.
The Petty is a small utility knife used for peeling, shaping, slicing fruit and vegetables, chopping herbs and making side dishes.
Intended use: utility knife, meat, fish, vegetables
Type of production: Artisan
Production Lama: Japan
Blade: Hand forged, in laminated damascus with Blue Steel carbon steel cutting edge (63 hrc) and side plates in stainless steel, copper and brass
Handle: Desert Ironwood
Blade length: 135mm.
Blade thickness: 2.5mm.
Total length: 245mm.
Weight: 131g.
Packaging: Wooden box
Notes: the knife is entirely handmade by Takeshi SajUse and maintenance
- Do not cut bones or frozen. The blade can chip or break.
- Hand wash with warm water and towel dry.
- Use stones for sharpening and maintenance of the blade.TS-ETTY -
Takeshi Saji - Chef's Bunka Knife 180mm with Desert Ironwood Handle - SPG2 Damascus - kitchen knife
Takeshi Saji was born in 1948 in Takefu (Fukui prefecture), a city located roughly in the center of Japan and in the heart of an area for centuries devoted to the production of blades. His workshop is still there, built around the oven thanks to which, for several years now, Takeshi Saji forges steel (especially damascus) with which he makes various models of traditional Japanese knives. The choice of materials for the finishes (mainly natural), the essential lines - evocative of use - and the chromatic combinations of rare impact make his creations unique and unmistakable in the panorama of world cutlery and, at home, they have earned him the prestigious title of Master.
Intended use: kitchen knife, meat, vegetables, fish
Type of production: Artisan
Production Lama: Japan
Blade: Hand forged, laminated damascus with SPG2 sintered steel edge (63 hrc)
Handle: Desert Ironwood
Blade length: 180mm.
Blade thickness: 2.5mm.
Total length: 303mm.
Weight: 239g.
Packaging: Wooden box
Notes: the knife is entirely handmade by Takeshi Saj
Use and maintenance- Do not cut bones or frozen. The blade can chip or break.
- Hand wash with warm water and towel dry.
- Use stones for sharpening and maintenance of the blade.TS-R2 -
Olamic Cutlery - Busker Gusto - Acid Rain Frosty - Green Holes - handmade knife
Intended use: collection / gentleman / sportsman
Type of production: Artisan
Lama Production: Visalia, California, USA
Blade: Stainless steel M390 - Stonewashed
Handle: Acid Rain Frosty titanium with green anodizations, screws, spacer and green anodized clips
Blade length: 65mm.
Blade thickness: 3.5mm.
Closed length: 88mm.
Total length: 152mm.
Thick when closed: 10.5mm.
Weight: 76g.
Opening: front flipper system on movement with ball bearings
Closure: FrameLock
Clip: titanium acid rain frosty green anodized
Packaging: hard-copy textile case with zip closure and Olamic Cutlery logos - certificate of guarantee and authenticity with serial number
Notes: each Olamic knife is unique and made entirely by hand in different combinations of materials, finishes, colors and details - each knife is numberedOC-BUS-GAF -
Olamic Cutlery - Wayfarer 247 - Boneyard Gunkote - Funky Holes - handmade knife
The Wayfarer 247 was initially released in May 2016 and since then Olamic has continuously refined the design and the model, enriching it with features, options and customizations to choose from to create millions of possible combinations on the model. In May 2018 the range is extended by offering 4 different blade shapes to choose from: drop point, harpoon, sheepscliffe and much more.
Intended use: collection / sports
Type of production: Artisan
Lama Production: Visalia, California, USA
Blade: M390 stainless steel - Acidwash
Handle: carved titanium with gunkote boneyard finish, screws and gunkote boneyard spacer
Blade length: 90mm.
Blade thickness: 3.5mm.
Length closed: 123mm.
Total length: 207mm.
Thick when closed: 12.5mm.
Weight: 136g.
Opening: carson flipper system on movement with ball bearings
Closure: FrameLock
Clip: titanium boneyard gunkote
Packaging: hard-copy textile case with zip closure and Olamic Cutlery logos - certificate of guarantee and authenticity with serial number
Notes: each Olamic knife is unique and made entirely by hand in different combinations of materials, finishes, colors and details - each knife is numberedOC-W247-BGF -
Olamic Cutlery - Wayfarer 247 - Kinetic Rainforest - 5 Holes Violet - custom knife
The Wayfarer 247 was initially released in May 2016 and since then Olamic has continuously refined the design and the model, enriching it with features, options and customizations to choose from to create millions of possible combinations on the model. In May 2018 the range is extended by offering 4 different blade shapes to choose from: drop point, harpoon, sheepscliffe and much more.
Intended use: collection / sports
Type of production: Artisan
Lama Production: Visalia, California, USA
Blade: M390 stainless steel - Acidwash
Handle: kinetic rainforest titanium with purple anodizing, screws and kinetic rainforest spacer
Blade length: 90mm.
Blade thickness: 3.5mm.
Length closed: 123mm.
Total length: 207mm.
Thick when closed: 12.5mm.
Weight: 136g.
Opening: carson flipper system on movement with ball bearings
Closure: FrameLock
Clip: titanium kinetic rainforest
Packaging: hard-copy textile case with zip closure and Olamic Cutlery logos - certificate of guarantee and authenticity with serial number
Notes: each Olamic knife is unique and made entirely by hand in different combinations of materials, finishes, colors and details - each knife is numberedOC-W247-KRV -
Olamic Cutlery - Wayfarer 247 - Dark Blast - Entropic with Progressive Holes - handmade knife
The Wayfarer 247 was initially released in May 2016 and since then Olamic has continuously refined the design and the model, enriching it with features, options and customizations to choose from to create millions of possible combinations on the model. In May 2018 the range is extended by offering 4 different blade shapes to choose from: drop point, harpoon, sheepscliffe and much more.
Intended use: collection / sports
Type of production: Artisan
Lama Production: Visalia, California, USA
Blade: M390 stainless steel - Acidwash
Handle: dark blast titanium with blue entropic interior design, blue anodized screws, blue entropic spacer
Blade length: 90mm.
Blade thickness: 3.5mm.
Length closed: 123mm.
Total length: 207mm.
Thick when closed: 12.5mm.
Weight: 136g.
Opening: carson flipper system on movement with ball bearings
Closure: FrameLock
Clip: titanium
Packaging: hard-copy textile case with zip closure and Olamic Cutlery logos - certificate of guarantee and authenticity with serial number
Notes: each Olamic knife is unique and made entirely by hand in different combinations of materials, finishes, colors and details - each knife is numberedOC-W247-DBE -
Olamic Cutlery - Wayfarer 247 - Dark Blast- 5 Holes Purple - custom knife
The Wayfarer 247 was initially released in May 2016 and since then Olamic has continuously refined the design and the model, enriching it with features, options and customizations to choose from to create millions of possible combinations on the model. In May 2018 the range is extended by offering 4 different blade shapes to choose from: drop point, harpoon, sheepscliffe and much more.
Intended use: collection / sports
Type of production: Artisan
Lama Production: Visalia, California, USA
Blade: Stainless steel M390 - 2 tone stonewashed
Handle: dark blast titanium with purple anodized
Blade length: 90mm.
Blade thickness: 3.5mm.
Length closed: 123mm.
Total length: 207mm.
Thick when closed: 12.5mm.
Weight: 136g.
Opening: carson flipper system on movement with ball bearings
Closure: FrameLock
Clip: titanium
Packaging: hard-copy textile case with zip closure and Olamic Cutlery logos - certificate of guarantee and authenticity with serial number
Notes: each Olamic knife is unique and made entirely by hand in different combinations of materials, finishes, colors and details - each knife is numberedOC-W247-DBP -
Takeshi Saji - Bamboo knife SJ262 - artisan knife
Intended use: Collection / Sports
Type of production: Artisan
Lama production: Japan
Blade: Forged by hand, in Hitachi Shirogami 64HRC carbon steel
Blade treatment: -
Handle: traditional Japanese bamboo wood
Blade length: 95mm.
Blade thickness: 3mm.
Length closed: -
Total length: 215mm.
Thickness when closed: -
Balancing: -
Weight: 80g.
Closure: -
Clip: -
Sheath: bamboo wood
Packaging: Carton box
Notes: entirely handmade by Takeshi SajiSJ262 -
Takeshi Saji - Miyabi Shuryou knife - Craft knife
Purpose: Collection / Sportsman
Type of production: craftsmanship
Blade Production: Japan
Blade: Hand forged, rolled damper with Hitachi Shirogami cutting edge at 64HRC
Blade Treatment: -
Manicure: Sakura (cherry wood)
Blade Length: 155mm.
Blade thickness: 5mm.
Closed length: -
Total length: 290mm.
Closure thickness: -
Balance: -
Weight: 248g.
Closure: -
Clip: -
Sheath: Leather and Sakura (cherry wood)
Packing: Carton box
Notes: Hand made entirely by Takeshi SajiTS-MSH -
Takeshi Saji - Hanta Hunter Knife 180 - Craft Knife
Purpose of use: Collection / Sportsman / Machete
Type of production: Artisan
Blade Production: Japan
Blade: Hand forged, rolled damper with Hitachi Shirogami cutting edge at 64HRC
Blade Treatment: -
Manicure: Wood covered with leather strip
Blade Length: 175mm.
Blade thickness: 5mm.
Closed length: -
Total Length: 315mm.
Closure thickness: -
Balance: -
Weight: 98g.
Closure: -
Clip: -
Sheath: Leather treated
Packing: Carton box
Notes: Hand made entirely by Takeshi SajiTS-H180 -
Takeshi Saji - Musashi Tanto 130 - custom Knife
Purpose of use: Collection / Sportsman / Machete
Type of production: Artisan
Blade Production: Japan
Blade: Hand forged, rolled damper with Hitachi Shirogami cutting edge at 64HRC
Blade Treatment: -
Manicure: Paracord
Blade Length: 125mm.
Blade thickness: 5mm.
Closed length: -
Total Length: 245mm.
Closure thickness: -
Balance: -
Weight: 205g.
Closure: -
Clip: -
Sheath: IN LEATHER
Packing: Carton box
Notes: Hand made entirely by Takeshi SajiTS-MT130 -
Stedemon Knife Co. - ZKC C02 Jade Flipper - STEZKCC029 - Knife
Purpose of use: Sportsman
Type of production: Industrial
Country of production: China
Blade: Stainless steel 440C 58HRC
Handle: G10
Blade Length: 88mm.
Blade thickness: 4mm.
Closed length: 130mm.
Total length: 220mm.
Weight: 134g.
Closure: Liner Lock
Clip: stainless steel
Packing: cardboard box with logos Stedemon Knife Co.
Notes: Opening through the Carson Flipper system - movement on ball bearingsSTEZKCC029€77.87Out of stock -
Stedemon Knife Co. - ZKC D01 Blue Flipper - STEZKC01SW - Knife
Purpose of use: Sportsman
Type of production: Industrial
Country of production: China
Blade: Stainless steel 440C 58HRC
Handle: G10
Blade Length: 95mm.
Blade thickness: 3mm.
Closed length: 130mm.
Total Length: 230mm.
Weight: 142g.
Closure: Liner Lock
Clip: stainless steel
Packing: cardboard box with logos Stedemon Knife Co.
Notes: Opening through the Carson Flipper system - movement on ball bearingsSTEZKC01SW€0.00Only -20 leftOut of stock -
Takeshi Saji - Miyabi Shikarigata knife - Knife custom
Takeshi Saji - Miyabi Shikarigata knife - Knife custom
Intended Use: Collection / Sports / Machete
Type of production: Artisan
Production Lama: Japan
Blade: Hand Forged, damask laminated with sharp Hitachi Shirogami to 64HRC
Blade treatment: -
Handle: Sakura (cherry wood)
Blade length: 115mm.
Blade thickness: 4mm.
Closed Length: -
Overall length: 225mm.
Thick when closed: -
Balancing: -
Weight: 160g.
Closed: -
Clip: -
Sheath: Leather and Sakura (cherry wood)
Packaging: Cardboard Box
Notes: entirely handmade by Takeshi SajiTS-MSHI -
Takeshi Saji - Mikaduki 240 Black - Custom Knife
Takeshi Saji was born in 1948 in Takefu ( Fukui Prefecture ) , a city located approximately in the center of Japan and in the heart of an area for centuries devoted to the production of blades . His lab is still there, built around the oven thanks to which, for several years now , Takeshi Saji forges the steel (especially damascus) with which he made various models of traditional Japanese knives . The choice of material finishes (mostly natural ) , the essential lines - evocative use - and the color combinations of rare impact his accomplishments make unique and unmistakable in view of the cutlery world and at home , have earned him the prestigious title of Master .
Intended use: Collection / Sports / Machete
Production Type: Handmade
Production Blade: Japan
Blade: Forged by hand, damask laminated with sharp Hitachi Shirogami to 64HRC
Treatment Blade: -
Handle: Paracord
Blade length : 235mm .
Blade thickness : 5mm.
Length closed : -
Overall length: 390mm .
Thick when closed: -
Balancing : -
Weight: 465g .
Closure: -
Clip: -
Sheath: Leather
Packaging: Cardboard Box
Notes: entirely hand-made by Takeshi SajiTS-MB240 -
Takeshi Saji - Santoku Kitchen Chef with Maki-e Art - kitchen knife
Takeshi Saji - Santoku Kitchen Chef with Maki-e Art - kitchen knife
Use: kitchen knife, meat, vegetables, fish
Type of production: Artisan
Production Lama: Japan
Blade: Forged by hand, damask laminate with edge Hitachi Shirogami to 64HRC
Handle: lacquered wood and painted by hand
Blade length: 175mm.
Blade thickness: 3mm.
Length closed: -
Overall length: 305mm.
Thick when closed: -
Balancing: -
Weight: 204g.
Sheath: lacquered wood and hand painted
Packaging: Cardboard Box
Note: the knife is made entirely by hand by Takeshi Saji, the painting and the chasing of the sheath is made by Master Kouichiro Tsukada with the ancient technique of Maki-e art.
Use and maintenance
- Do not cut bones or frozen. The blade can chip or break. - Hand wash with warm water and pat dry with towel. - Use stones for sharpening and maintenance of the blade.saji-custom -
Takeshi Saji - Bat 150 - Knife Craft
Takeshi Saji - Bat 150 - Knife Craft
Intended Use: Collection / Sports
Type of production: Artisan
Production Lama: Japan
Blade: Forged by hand, damask laminate with sharp Hitachi Shirogami to 64HRC
Treatment Lama: -
Handle: black micarta
Blade length: 160mm.
Blade thickness: 6mm.
Length closed: -
Overall length: 290mm.
Thick when closed: -
Balancing: -
Weight: 406g.
Closing: -
Clip: -
Sheath: Black Leather
Packaging: Cardboard Box
Notes: entirely handmade by Takeshi SajiTS-BAT-150 -
Takeshi Saji - Bat 130 - Custom Knife
Takeshi Saji was born in 1948 in Takefu (Fukui prefecture), a city located roughly in the center of Japan and in the heart of an area for centuries devoted to the production of blades. His lab is still there, built around the oven thanks to which, for several years now, Takeshi Saji forge steel (especially damascus) with which he made various models of traditional Japanese knives. The choice of materials for finishing (mainly natural), the essential lines - evocative use - and the color combinations of rare impact his accomplishments make unique and unmistakable in view of the cutlery world and at home, have earned him the prestigious Master title.
Intended use: Collection / Sports / Machete
Production Type: Handmade
Production Blade: Japan
Blade: Forged by hand, damask laminated with sharp Hitachi Shirogami to 64HRC
Treatment Lama: -
Handle: micarta
Blade length: 83mm.
Blade thickness: 4mm.
Length closed: -
Total length: 207mm.
Thick when closed: -
Balance: -
Weight: 168g.
Closing: -
Clip: -
Sheath: Brown leather
Packaging: Cardboard Box
Notes: entirely hand-made by Takeshi SajiTS-BAT-130 -
Takeshi Saji - Same-Nata - custom knife
Takeshi Saji was born in 1948 in Takefu (prefecture of Fukui), a city located roughly in the center of Japan and in the heart of an area for centuries devoted to the production of blades. His lab is still there, built around the oven thanks to which, for several years now, Takeshi Saji Steel products (especially damask) with which he made various models of traditional Japanese knives. The choice of materials for finishes (mostly natural), the essential lines - evocative use - and the color combinations of rare impact make his accomplishments unique and unmistakable in the panorama of the cutlery world and at home, have earned him the prestigious Master title.
Intended Use: Collection / Sports / Machete
Type of production: Artisan
Production Lama: Japan
Blade: Forged by hand, damask laminate with sharp Hitachi Shirogami to 64HRC
Treatment Lama: -
Handle: Tsuka-ito (plot typical of Japanese Katana) black cotton
Blade length: 170mm.
Blade thickness: 5mm.
Length closed: -
Overall length: 340mm.
Thick when closed: -
Balancing: Advanced
Weight: 510g.
Closing: -
Clip: -
Sheath: Painted wood with leather belt loop
Packaging: Cardboard Box
Notes: entirely handmade by Takeshi SajiTS-12205 -
Takeshi Saji - Mikaduki 180 Green - Handmade Knife
Takeshi Saji was born in 1948 in Takefu ( Fukui Prefecture ) , a city located approximately in the center of Japan and in the heart of an area for centuries devoted to the production of blades . His lab is still there, built around the oven thanks to which, for several years now , Takeshi Saji forges the steel (especially damascus) with which he made various models of traditional Japanese knives . The choice of material finishes (mostly natural ) , the essential lines - evocative use - and the color combinations of rare impact his accomplishments make unique and unmistakable in view of the cutlery world and at home , have earned him the prestigious title of Master .
Takeshi Saji - Mikatsuki 180 Black - Handmade Knife
Intended use: Collection / Sports / Machete
Production Type: Handmade
Production Blade: Japan
Blade: Forged by hand, damask laminated with sharp Hitachi Shirogami to 64HRC
Treatment Blade: -
Handle: Green Paracord
Blade length: 205mm.
Blade thickness: 5mm.
Length closed: -
Overall length: 335mm.
Thick when closed: -
Balancing: -
Weight: 358g.
Closure: -
Clip: -
Sheath: Wood painted
Packaging: Cardboard Box
Notes: entirely hand-made by Takeshi SajiTS-MG180 -
Takeshi Saji - Mikaduki 180 Black - Handmade Knife
Takeshi Saji was born in 1948 in Takefu ( Fukui Prefecture ) , a city located approximately in the center of Japan and in the heart of an area for centuries devoted to the production of blades . His lab is still there, built around the oven thanks to which, for several years now , Takeshi Saji forges the steel (especially damascus) with which he made various models of traditional Japanese knives . The choice of material finishes (mostly natural ) , the essential lines - evocative use - and the color combinations of rare impact his accomplishments make unique and unmistakable in view of the cutlery world and at home , have earned him the prestigious title of Master .
Takeshi Saji - Mikatsuki 180 Black - Handmade Knife
Intended use: Collection / Sports / Machete
Production Type: Handmade
Production Blade: Japan
Blade: Forged by hand, damask laminated with sharp Hitachi Shirogami to 64HRC
Treatment Blade: -
Handle: Black Paracord
Blade length: 205mm.
Blade thickness: 5mm.
Length closed: -
Overall length: 335mm.
Thick when closed: -
Balancing: -
Weight: 358g.
Closure: -
Clip: -
Sheath: Wood painted
Packaging: Cardboard Box
Notes: entirely hand-made by Takeshi SajiTS-MB180 -
Takeshi Saji - Hunter 240 - Custom Knife
Takeshi Saji was born in 1948 in Takefu ( Fukui Prefecture ) , a city located approximately in the center of Japan and in the heart of an area for centuries devoted to the production of blades . His lab is still there, built around the oven thanks to which, for several years now , Takeshi Saji forges the steel (especially damascus) with which he made various models of traditional Japanese knives . The choice of material finishes (mostly natural ) , the essential lines - evocative use - and the color combinations of rare impact his accomplishments make unique and unmistakable in view of the cutlery world and at home , have earned him the prestigious title of Master .
Intended use: Collection / Sports / Machete
Production Type: Handmade
Production Blade: Japan
Blade: Forged by hand, damask laminated with sharp Hitachi Shirogami to 64HRC
Treatment Blade: -
Handle : Wood covered with leather strip
Blade length : 265mm .
Blade thickness : 5mm.
Length closed : -
Overall length: 395mm .
Thick when closed: -
Balancing : -
Weight: 422g .
Closure: -
Clip: -
Sheath: Leather treated
Packaging: Cardboard Box
Notes: entirely hand-made by Takeshi Saji10892 -
Takeshi Saji - Mikaduki 270 Black - Custom Knife
Takeshi Saji was born in 1948 in Takefu ( Fukui Prefecture ) , a city located approximately in the center of Japan and in the heart of an area for centuries devoted to the production of blades . His lab is still there, built around the oven thanks to which, for several years now , Takeshi Saji forges the steel (especially damascus) with which he made various models of traditional Japanese knives . The choice of material finishes (mostly natural ) , the essential lines - evocative use - and the color combinations of rare impact his accomplishments make unique and unmistakable in view of the cutlery world and at home , have earned him the prestigious title of Master .
Intended use: Collection / Sports / Machete
Production Type: Handmade
Production Blade: Japan
Blade: Forged by hand, damask laminated with sharp Hitachi Shirogami to 64HRC
Treatment Blade: -
Handle: Paracord
Blade length : 285mm .
Blade thickness : 5mm.
Length closed : -
Overall length: 420mm .
Thick when closed: -
Balancing : -
Weight: 490g .
Closure: -
Clip: -
Sheath: Wood painted
Packaging: Cardboard Box
Notes: entirely hand-made by Takeshi Saji10891 -
Takeshi Saji - Kurosameshotou traditional knife - handmade knife
Takeshi Saji was born in 1948 in Takefu (Fukui prefecture), a city located roughly in the center of Japan and in the heart of an area for centuries devoted to the production of blades. His workshop is still there, built around the oven thanks to which, for several years now, Takeshi Saji has been forging steel (especially damascus) with which he makes various models of traditional Japanese knives. The choice of materials for the finishes (mainly natural), the essential lines - evocative of use - and the chromatic combinations of rare impact make his creations unique and unmistakable in the panorama of world cutlery and, at home, they have earned him the prestigious title of Master.
Intended use: Collection / Sports
Type of production: Artisan
Production Lama: Japan
Blade: Hand forged, 64HRC Hitachi Shirogami carbon steel
Blade treatment: -
Handle: traditional Japanese, ray skin and rattan
Blade length: 70mm.
Blade thickness: 4mm.
Closed Length: -
Total length: 184mm.
Thick when closed: -
Balancing: -
Weight: 100g.
Closing: -
Clip: -
Sheath: Leather
Packaging: Cardboard box
Notes: entirely handmade by Takeshi SajiTS-10698 -
Takeshi Saji - Tentoumushi - custom knife
Takeshi Saji was born in 1948 in Takefu (Fukui prefecture), a city located roughly in the center of Japan and in the heart of an area for centuries devoted to the production of blades. His lab is still there, built around the oven thanks to which, for several years now, Takeshi Saji forge steel (especially damascus) with which he made various models of traditional Japanese knives. The choice of materials for finishing (mainly natural), the essential lines - evocative use - and the color combinations of rare impact his accomplishments make unique and unmistakable in view of the cutlery world and at home, have earned him the prestigious Master title.
Intended use: Collection / Sports
Production Type: Handmade
Production Blade: Japan
Blade: Hand forged, carbon steel Hitachi Shirogami to 64HRC
Treatment Lama: -
Handle: traditional Japanese rope
Blade length: 56mm.
Blade thickness: 4mm.
Length closed: -
Total length: 168mm.
Thick when closed: -
Balance: -
Weight: 80g.
Closing: -
Clip: -
Sheath: Leather
Packaging: Cardboard Box
Notes: entirely hand-made by Takeshi Saji10589 -
Takeshi Saji - Karyudo Koyorikata - Craft Knife
Takeshi Saji was born in 1948 in Takefu (Fukui prefecture), a city located roughly in the center of Japan and in the heart of an area for centuries devoted to the production of blades. His lab is still there, built around the oven thanks to which, for several years now, Takeshi Saji forge steel (especially damascus) with which he made various models of traditional Japanese knives. The choice of materials for finishing (mainly natural), the essential lines - evocative use - and the color combinations of rare impact his accomplishments make unique and unmistakable in view of the cutlery world and at home, have earned him the prestigious Master title.
Intended use: Collection / Sports / Machete
Production Type: Handmade
Production Blade: Japan
Blade: Forged by hand, damask laminated with sharp Hitachi Shirogami to 64HRC
Treatment Lama: -
Handle: black rattan
Blade length: 115mm.
Blade thickness: 4mm.
Length closed: -
Total length: 225mm.
Thick when closed: -
Balance: -
Weight: 146g.
Closing: -
Clip: -
Sheath: wood covered with rattan
Packaging: Cardboard Box
Notes: entirely hand-made by Takeshi SajiTS-KARK -
Takeshi Saji - Nomurakata Kuma knife - Craft knife
Takeshi Saji was born in 1948 in Takefu (Fukui prefecture), a city located roughly in the center of Japan and in the heart of an area for centuries devoted to the production of blades. His lab is still there, built around the oven thanks to which, for several years now, Takeshi Saji forge steel (especially damascus) with which he made various models of traditional Japanese knives. The choice of materials for finishing (mainly natural), the essential lines - evocative use - and the color combinations of rare impact his accomplishments make unique and unmistakable in view of the cutlery world and at home, have earned him the prestigious Master title.
Intended use: Collection / Sports / Machete
Production Type: Handmade
Production Blade: Japan
Blade: Forged by hand, damask laminated with sharp Hitachi Shirogami to 64HRC
Treatment Lama: -
Handle: micarta
Blade length: 83mm.
Blade thickness: 4mm.
Length closed: -
Total length: 207mm.
Thick when closed: -
Balance: -
Weight: 168g.
Closing: -
Clip: -
Sheath: Brown leather
Packaging: Cardboard Box
Notes: entirely hand-made by Takeshi Saji10700 -
Takeshi Saji - Musashi 140 knife - Green paracord - Craft Knife
Takeshi Saji was born in 1948 in Takefu (Fukui prefecture), a city located roughly in the center of Japan and in the heart of an area for centuries devoted to the production of blades. His workshop is still there, built around the oven thanks to which, for several years now, Takeshi Saji has been forging steel (especially damascus) with which he makes various models of traditional Japanese knives. The choice of materials for the finishes (mainly natural), the essential lines - evocative of use - and the chromatic combinations of rare impact make his creations unique and unmistakable in the panorama of world cutlery and, at home, they have earned him the prestigious title of Master.
Intended use: Collection / Sports / Machete
Type of production: Artisan
Production Lama: Japan
Blade: Hand forged, laminated damask with 64HRC Hitachi Shirogami edge
Blade treatment: -
Handle: Paracord
Blade length: 140mm.
Blade thickness: 5mm.
Closed Length: -
Total length: 290mm.
Thick when closed: -
Balancing: -
Weight: 250g.
Closing: -
Clip: -
Sheath: in wood
Packaging: Cardboard boxTS-M140 -
LoneWolf - Black Talon - coltello
Destinazione d'uso: Tattico
Tipo di produzione: industriale
Lama: in acciaio inox CPM-S30V
Trattamento Lama: -
Produzione Lama: USA
Manicatura: nylon
Lunghezza lama: 83mm.
Spessore della lama: 3mm.
Lunghezza chiuso: 80mm
Lunghezza totale: 190mm.
Bilanciatura: -
Peso: 108g.
Chiusura: Liner Lock
Clip: Acciaio Inox
Fodero: -2790 -
LoneWolf - Dark Raven Combo - knife
Intended Use: Tactical
Type of production: industrial
Blade: stainless steel CPM-S30V
Treatment Lama: -
Production Lama USA
Handle material: G10
Blade length: 75mm.
Blade Thickness: 3mm.
Closed Length: 75mm
Total length: 175mm.
Balance: -
Weight: 110g.
Lock: Liner Lock
Clip: Stainless Steel
Sheath: -2791 -
LoneWolf - Loveless City - Buffalo Horn
Destinazione d'uso: coltello da tasca
Tipo di produzione: industriale
Lama: in acciaio inox 19C27
Trattamento Lama: -
Manicatura: Corno di Bufalo
Lunghezza lama: 60mm.
Spessore della lama: 2.5mm.
Lunghezza chiuso: 95mm.
Lunghezza totale: 160mm.
Bilanciatura: -
Peso: 65g.
Chiusura: -
Clip: -
Fodero: -
Note: scatola in alluminio1320 -
LoneWolf - Loveless City - Micarta knife
LoneWolf - Loveless City - Micarta knife
Intended use: Pocket Knife
Type of production: industrial
Blade: stainless steel 19c27
Treatment Blade: -
Handle: micarta loveless
Blade length: 60mm.
Blade Thickness: 2.5mm.
Closed Length: 95mm.
Overall length: 160mm.
Balancing: -
Weight: 65g.
Closure: -
Clip: -
Notes: aluminum box1318 -
LoneWolf - Loveless Clip Point Folder - knife
LoneWolf - Loveless Clip Point Folder - knife
Intended use: Sport
Type of production: Industrial
Production Blade: Italy
Blade: 154CM stainless steel
Treatment Blade: -
Handle: Micarta
Blade length: 75mm.
Blade thickness: 3mm.
Length closed: -
Overall length: 190mm.
Thick when closed: -
Balancing: -
Weight: 128g.
Lock: Liner Lock
Clip: -
Sheath: Leather
Packaging: cardboard box with logos Lonewolf
Notes: Design by Loveless1309 -
LoneWolf - Loveless Drop Point Fixed - coltello
Coltello fuori produzione dal 2009 - ultimo ed unico esemplare disponibile a magazzino
Destinazione d'uso: Sportivo/Caccia/Collezione
Tipo di produzione: Industriale
Produzione Lama: Italia
Lama: In acciaio inox 440B
Trattamento Lama: -
Manicatura: Micarta
Lunghezza lama: 95mm.
Spessore lama: 3mm.
Lunghezza chiuso: -
Lunghezza totale: 210mm.
Spessore da chiuso: -
Bilanciatura: -
Peso: 180g.
Chiusura: -
Clip: -
Fodero: in cuoio
Confezione: scatola in cartone con loghi Lonewolf
Note: Design by Bob Loveless2431 -
LoneWolf - Loveless Drop Point Folder - coltello
Destinazione d'uso: Sportivo
Tipo di produzione: Industriale
Produzione Lama: Italia
Lama: In acciaio inox 154CM
Trattamento Lama: -
Manicatura: Micarta
Lunghezza lama: 75mm.
Spessore lama: 3mm.
Lunghezza chiuso: -
Lunghezza totale: 190mm.
Spessore da chiuso: -
Bilanciatura: -
Peso: 136g.
Chiusura: Liner Lock
Clip: -
Fodero: in cuoio
Confezione: scatola in cartone con loghi Lonewolf
Note: Design by Loveless1308 -
LoneWolf - Loveless Drop Point Folder - David Yellowhorse Limited Edition
Destinazione d'uso: Sportivo
Tipo di produzione: Impugnatura Artigianale, Lama Industriale
Produzione Lama: Italia by Fantoni
Lama: In acciaio inox 154CM 58HRC
Trattamento Lama: -
Manicatura: Lavorazione artigianale a mosaico, in pietra dura, di David Yellowhorse
Lunghezza lama: 75mm.
Spessore lama: 3mm.
Lunghezza chiuso: -
Lunghezza totale: 190mm.
Spessore da chiuso: -
Bilanciatura: -
Peso: 128g.
Chiusura: Liner Lock
Clip: -
Fodero: in cuoio
Confezione: cofanetto da collezione con loghi Lonewolf, Fantoni e David Yellowhorse; certificati di garanzia
Note: Edizione limitata prodotta in soli 6 esemplari - Design lama by Bob Loveless2795 -
Takeshi Saji - Akai Same Hanta knife - Red Race Skin - Craft Knife
Takeshi Saji was born in 1948 in Takefu (Fukui prefecture), a city located roughly in the center of Japan and in the heart of an area for centuries devoted to the production of blades. His workshop is still there, built around the oven thanks to which, for several years now, Takeshi Saji has been forging steel (especially damascus) with which he makes various models of traditional Japanese knives. The choice of materials for the finishes (mainly natural), the essential lines - evocative of use - and the chromatic combinations of rare impact make his creations unique and unmistakable in the panorama of world cutlery and, at home, they have earned him the prestigious title of Master.
Intended use: Collection / Sports
Type of production: Artisan
Production Lama: Japan
Blade: Hand forged, rolled steel with VG-10 edge at 61HRC
Blade treatment: -
Handle: Tou-Maki (rolled rattan) and Same-Kawa (ray skin)
Blade length: 135mm.
Blade thickness: 5mm.
Closed Length: -
Total length: 255mm.
Thick when closed: -
Balancing: -
Weight: 190g.
Closing: -
Clip: -
Sheath: Same-Kawa (ray skin)
Packaging: Cardboard box
Notes: entirely handmade by Takeshi Saji4015RR -
Takeshi Saji - Cha Hebi Hanta Crocodile Skin - Damascus blade
Takeshi Saji - Cha Hebi Hanta Crocodile Skin - Damascus blade
Intended Use: Collection / Sports
Type of production: Artisan
Production Lama: Japan
Blade: Hand Forged, laminated damask with sharp steel Hitachi Shirogami to 64HRC
Blade treatment: -
Handle: Tou-maki (rolled Rattan) and crocodile skin
Blade length: 139mm.
Blade thickness: 4.5mm.
Closed Length: -
Overall length: 252mm.
Thick when closed: -
Balancing: -
Weight: 180g.
Closed: -
Clip: -
Sheath: Crocodile Skin
Packaging: Cardboard Box
Notes: entirely handmade by Takeshi SajiTS-CHAH -
Takeshi Saji - Kageboushi 150 knife - Artisan Knife
Takeshi Saji was born in 1948 in Takefu (Fukui prefecture), a city located roughly in the center of Japan and in the heart of an area for centuries devoted to the production of blades. His workshop is still there, built around the oven thanks to which, for several years now, Takeshi Saji has been forging steel (especially damascus) with which he makes various models of traditional Japanese knives. The choice of materials for the finishes (mainly natural), the essential lines - evocative of use - and the chromatic combinations of rare impact make his creations unique and unmistakable in the panorama of world cutlery and, at home, they have earned him the prestigious title of Master.
Intended use: Collection / Sports
Type of production: Artisan
Production Lama: Japan
Blade: Hand forged, laminated damask with 64HRC Hitachi Shirogami edge
Blade treatment: -
Handle: traditional Japanese, in stingray leather with silk weaving
Blade length: 155mm.
Blade thickness: 5mm.
Closed Length: -
Total length: 280mm.
Thick when closed: -
Balancing: -
Weight: 248g.
Closing: -
Clip: -
Sheath: Painted wood with cotton sageo
Packaging: Cardboard box and silk sheath
Notes: entirely handmade by Takeshi SajiTS-4024 -
Takeshi Saji - Kiridashi Seiryu - custom knife
Takeshi Saji è nato nel 1948 a Takefu (prefettura di Fukui), una città situata all'incirca nel centro del Giappone e nel cuore di una zona da secoli votata alla produzione di lame. Il suo laboratorio è ancora lì, costruito intorno al forno grazie al quale, ormai da parecchi anni, Takeshi Saji forgia l'acciaio (soprattutto damasco) con cui realizza vari modelli di coltelli tradizionali giapponesi. La scelta dei materiali per le finiture (prevalentemente naturali), le linee essenziali - evocatrici dell'utilizzo - e gli accostamenti cromatici di raro impatto rendono le sue realizzazioni uniche e inconfondibili nel panorama della coltelleria mondiale e, in patria, gli sono valse il prestigioso titolo di Maestro.
Il kiridashi è uno strumento a metà tra un coltello e un taglierino dai molteplici utilizzi. La particolarità del Kiridashi è data dalla bisellatura asimmetrica: uno solo dei due lati è affilato mentre l'altro resta piatto.
Destinazione d'uso: Collezione/Sportivo
Tipo di produzione: Artigianale
Produzione Lama: Giappone
Lama: Forgiata a mano, in damasco laminato con tagliente in Hitachi Shirogami a 64HRC
Trattamento Lama: -
Manicatura: intreccio in rattan
Lunghezza lama: 65mm.
Spessore lama: 3.5mm.
Lunghezza chiuso: -
Lunghezza totale: 200mm.
Spessore da chiuso: -
Bilanciatura: -
Peso: 100g.
Chiusura: -
Clip: -
Fodero: scatola di legno
Confezione: Scatola di cartone
Note: interamente realizzati a mano da Takeshi Saji4033 -
Takeshi Saji - Kisu Dai - custom knife
Takeshi Saji è nato nel 1948 a Takefu (prefettura di Fukui), una città situata all'incirca nel centro del Giappone e nel cuore di una zona da secoli votata alla produzione di lame. Il suo laboratorio è ancora lì, costruito intorno al forno grazie al quale, ormai da parecchi anni, Takeshi Saji forgia l'acciaio (soprattutto damasco) con cui realizza vari modelli di coltelli tradizionali giapponesi. La scelta dei materiali per le finiture (prevalentemente naturali), le linee essenziali - evocatrici dell'utilizzo - e gli accostamenti cromatici di raro impatto rendono le sue realizzazioni uniche e inconfondibili nel panorama della coltelleria mondiale e, in patria, gli sono valse il prestigioso titolo di Maestro.
Destinazione d'uso: Collezione/Sportivo
Tipo di produzione: Artigianale
Produzione Lama: Giappone
Lama: Forgiata a mano, in acciaio al carbonio Hitachi Shirogami a 64HRC
Trattamento Lama: -
Manicatura: intreccio in rattan
Lunghezza lama: 75mm.
Spessore lama: 4mm.
Lunghezza chiuso: -
Lunghezza totale: 185mm.
Spessore da chiuso: -
Bilanciatura: -
Peso: 86g.
Chiusura: -
Clip: -
Fodero: Legno
Confezione: Scatola di cartone
Note: interamente realizzati a mano da Takeshi SajiTS-KISD -
Takeshi Saji - Koinobori - black carp skin - custom Knife
Takeshi Saji - Koinobori - black carp skin - custom Knife
Intended Use: Collection / Sports
Type of production: Artisan
Production Lama: Japan
Blade: Hand Forged, damask laminated with sharp Hitachi Shirogami to 64HRC
Blade treatment: -
Handle: Koinobori (carp) and Tou-Maki (rattan)
Blade length: 100mm.
Blade thickness: 4mm.
Closed Length: -
Overall length: 207mm.
Thick when closed: -
Balancing: -
Weight: 128g.
Closed: -
Clip: -
Sheath: Leather
Packaging: Cardboard Box
Notes: entirely handmade by Takeshi SajiTS-KOIN -
Takeshi Saji - Koinobori - red carp skin - Craft knife
Purpose: Collection / Sportsman
Type of production: Artisan
Blade Production: Japan
Blade: Hand forged, Yoshoku laminated damper with cutting edge in Hitachi Aogami at 64HRC
Blade Treatment: -
Manicure: Koinobori (carp) and Tou-Maki (rattan)
Blade Length: 100mm.
Blade thickness: 4mm.
Closed length: -
Overall length: 207mm.
Closure thickness: -
Balance: -
Weight: 128g.
Closure: -
Clip: -
Sheath: in leather
Packing: Carton box
Notes: Hand made entirely by Takeshi SajiTS-KOIR -
Takeshi Saji - Kuro Same Hanta knife - Manta leather - Artisan knife
Purpose: Collection / Sportsman
Type of production: craftsmanship
Blade Production: Japan
Blade: Hand forged, rolled steel with cutting edge in VG-10 to 61HRC
Blade Treatment: -
Manicure: Tou-Maki (Rolled Rattan) and Same-Kawa (Breast Skin)
Blade Length: 135mm.
Blade thickness: 5mm.
Closed length: -
Total length: 255mm.
Closure thickness: -
Balance: -
Weight: 190g.
Closure: -
Clip: -
Sheath: Same-Kawa (breed skin)
Packing: Carton box
Notes: Hand made entirely by Takeshi Saji4015RN -
Takeshi Saji - Mikaduki 250 - custom knife
Takeshi Saji è nato nel 1948 a Takefu (prefettura di Fukui), una città situata all'incirca nel centro del Giappone e nel cuore di una zona da secoli votata alla produzione di lame. Il suo laboratorio è ancora lì, costruito intorno al forno grazie al quale, ormai da parecchi anni, Takeshi Saji forgia l'acciaio (soprattutto damasco) con cui realizza vari modelli di coltelli tradizionali giapponesi. La scelta dei materiali per le finiture (prevalentemente naturali), le linee essenziali - evocatrici dell'utilizzo - e gli accostamenti cromatici di raro impatto rendono le sue realizzazioni uniche e inconfondibili nel panorama della coltelleria mondiale e, in patria, gli sono valse il prestigioso titolo di Maestro.
Destinazione d'uso: Collezione/Sportivo/Machete
Tipo di produzione: Artigianale
Produzione Lama: Giappone
Lama: Forgiata a mano, in damasco laminato con tagliente in Hitachi Shirogami a 64HRC
Trattamento Lama: -
Manicatura: Paracord
Lunghezza lama: 275mm.
Spessore lama: 5mm.
Lunghezza chiuso: -
Lunghezza totale: 385mm.
Spessore da chiuso: -
Bilanciatura: -
Peso: 450g.
Chiusura: -
Clip: -
Fodero: Legno verniciato
Confezione: Scatola di cartone
Note: interamente realizzati a mano da Takeshi Saji4016M -
Takeshi Saji - Mikaduki Green 270 - Knife Artigianale
Takeshi Saji - Mikatsuki Green 270 - Knife ArtigianaleTakeshi Saji - Mikatsuki Green 270 - Craft Knife
Intended use: Collection / Sports / Machete
Production Type: Handmade
Production Blade: Japan
Blade: Forged by hand, damask laminated with sharp Hitachi Shirogami to 64HRC
Treatment Blade: -
Handle: Paracord
Blade length: 285mm.
Blade thickness: 5mm.
Length closed: -
Overall length: 420mm.
Thick when closed: -
Balancing: -
Weight: 490g.
Closure: -
Clip: -
Sheath: Wood painted
Packaging: Cardboard Box
Notes: entirely hand-made by Takeshi Saji4016L -
Takeshi Saji - Mikaduki knife 300 Green - Craft knife
Purpose of use: Collection / Sportsman / Machete
Type of production: craftsmanship
Blade Production: Japan
Blade: Hand forged, rolled damper with Hitachi Shirogami cutting edge at 64HRC
Blade Treatment: -
Manicure: Paracord
Blade length: 320mm.
Blade thickness: 5mm.
Closed length: -
Total length: 460mm.
Closure thickness: -
Balance: -
Weight: 650g.
Closure: -
Clip: -
Sheath: Painted wood
Packing: Carton box
Notes: Hand made entirely by Takeshi Saji4016XL -
Takeshi Saji - Miyabi Hayabusa - custom knife
Takeshi Saji è nato nel 1948 a Takefu (prefettura di Fukui), una città situata all'incirca nel centro del Giappone e nel cuore di una zona da secoli votata alla produzione di lame. Il suo laboratorio è ancora lì, costruito intorno al forno grazie al quale, ormai da parecchi anni, Takeshi Saji forgia l'acciaio (soprattutto damasco) con cui realizza vari modelli di coltelli tradizionali giapponesi. La scelta dei materiali per le finiture (prevalentemente naturali), le linee essenziali - evocatrici dell'utilizzo - e gli accostamenti cromatici di raro impatto rendono le sue realizzazioni uniche e inconfondibili nel panorama della coltelleria mondiale e, in patria, gli sono valse il prestigioso titolo di Maestro.
Destinazione d'uso: Collezione/Sportivo
Tipo di produzione: Artigianale
Produzione Lama: Giappone
Lama: Forgiata a mano, in damasco laminato con tagliente in Hitachi Shirogami a 64HRC
Trattamento Lama: -
Manicatura: Sakura (legno di ciliegio)
Lunghezza lama: 110mm.
Spessore lama: 5mm.
Lunghezza chiuso: -
Lunghezza totale: 215mm.
Spessore da chiuso: -
Bilanciatura: -
Peso: 134g.
Chiusura: -
Clip: -
Fodero: Cuoio e Sakura (legno di ciliegio)
Confezione: Scatola di cartone
Note: interamente realizzati a mano da Takeshi Saji4012 -
Takeshi Saji - Miyabi Kenryu - Coltello Artigianale
Takeshi Saji è nato nel 1948 a Takefu (prefettura di Fukui), una città situata all'incirca nel centro del Giappone e nel cuore di una zona da secoli votata alla produzione di lame. Il suo laboratorio è ancora lì, costruito intorno al forno grazie al quale, ormai da parecchi anni, Takeshi Saji forgia l'acciaio (soprattutto damasco) con cui realizza vari modelli di coltelli tradizionali giapponesi. La scelta dei materiali per le finiture (prevalentemente naturali), le linee essenziali - evocatrici dell'utilizzo - e gli accostamenti cromatici di raro impatto rendono le sue realizzazioni uniche e inconfondibili nel panorama della coltelleria mondiale e, in patria, gli sono valse il prestigioso titolo di Maestro.
Destinazione d'uso: Collezione/Sportivo
Tipo di produzione: Artigianale
Produzione Lama: Giappone
Lama: Forgiata a mano, in damasco laminato con tagliente in Hitachi Shirogami a 64HRC
Trattamento Lama: -
Manicatura: Sakura (legno di ciliegio)
Lunghezza lama: 130mm.
Spessore lama: 4.5mm.
Lunghezza chiuso: -
Lunghezza totale: 245mm.
Spessore da chiuso: -
Bilanciatura: -
Peso: 172g.
Chiusura: -
Clip: -
Fodero: Cuoio e Sakura (legno di ciliegio)
Confezione: Scatola di cartone
Note: interamente realizzati a mano da Takeshi Saji4011 -
Takeshi Saji - Miyabi Kuma - custom knife
Takeshi Saji è nato nel 1948 a Takefu (prefettura di Fukui), una città situata all'incirca nel centro del Giappone e nel cuore di una zona da secoli votata alla produzione di lame. Il suo laboratorio è ancora lì, costruito intorno al forno grazie al quale, ormai da parecchi anni, Takeshi Saji forgia l'acciaio (soprattutto damasco) con cui realizza vari modelli di coltelli tradizionali giapponesi. La scelta dei materiali per le finiture (prevalentemente naturali), le linee essenziali - evocatrici dell'utilizzo - e gli accostamenti cromatici di raro impatto rendono le sue realizzazioni uniche e inconfondibili nel panorama della coltelleria mondiale e, in patria, gli sono valse il prestigioso titolo di Maestro.
Destinazione d'uso: Collezione/Sportivo
Tipo di produzione: Artigianale
Produzione Lama: Giappone
Lama: Forgiata a mano, in damasco laminato con tagliente in Shirogami a 64HRC
Trattamento Lama: -
Manicatura: Sakura (legno di ciliegio)
Lunghezza lama: 150mm.
Spessore lama: 5.5mm.
Lunghezza chiuso: -
Lunghezza totale: 270mm.
Spessore da chiuso: -
Bilanciatura: -
Peso: 234g.
Chiusura: -
Clip: -
Fodero: Cuoio e Sakura (legno di ciliegio)
Confezione: Scatola di cartone
Note: interamente realizzati a mano da Takeshi SajiTS-MKUM -
Takeshi Saji - Miyabi Sasano - custom knife
Takeshi Saji è nato nel 1948 a Takefu (prefettura di Fukui), una città situata all'incirca nel centro del Giappone e nel cuore di una zona da secoli votata alla produzione di lame. Il suo laboratorio è ancora lì, costruito intorno al forno grazie al quale, ormai da parecchi anni, Takeshi Saji forgia l'acciaio (soprattutto damasco) con cui realizza vari modelli di coltelli tradizionali giapponesi. La scelta dei materiali per le finiture (prevalentemente naturali), le linee essenziali - evocatrici dell'utilizzo - e gli accostamenti cromatici di raro impatto rendono le sue realizzazioni uniche e inconfondibili nel panorama della coltelleria mondiale e, in patria, gli sono valse il prestigioso titolo di Maestro.
Destinazione d'uso: Collezione/Sportivo
Tipo di produzione: Artigianale
Produzione Lama: Giappone
Lama: Forgiata a mano, in damasco laminato con tagliente in Hitachi Shirogami a 64HRC
Trattamento Lama: -
Manicatura: Sakura (legno di ciliegio)
Lunghezza lama: 140mm.
Spessore lama: 5mm.
Lunghezza chiuso: -
Lunghezza totale: 245mm.
Spessore da chiuso: -
Bilanciatura: -
Peso: 182g.
Chiusura: -
Clip: -
Fodero: Cuoio e Sakura (legno di ciliegio)
Confezione: Scatola di cartone
Note: interamente realizzati a mano da Takeshi SajiTS-MSAS -
Takeshi Saji - Sannomaru knife - Craft knife
Purpose: Collection / Sportsman
Type of production: Artisan
Blade Production: Japan
Blade: Hand forged, rolled damper with Hitachi Shirogami cutting edge at 64HRC
Blade Treatment: -
Manicure: Tou-Maki (Rolled Rattan) and leather
Blade Length: 134mm.
Blade thickness: 4.5mm.
Closed length: -
Total length: 250mm.
Closure thickness: -
Balance: -
Weight: 162g.
Closure: -
Clip: -
Sheath: Leather and Rattan
Packing: Carton box
Notes: Hand made entirely by Takeshi SajiTS-SANN -
Takeshi Saji - Shiroi Hebi Hanta - Pitone - custom knife
Takeshi Saji è nato nel 1948 a Takefu (prefettura di Fukui), una città situata all'incirca nel centro del Giappone e nel cuore di una zona da secoli votata alla produzione di lame. Il suo laboratorio è ancora lì, costruito intorno al forno grazie al quale, ormai da parecchi anni, Takeshi Saji forgia l'acciaio (soprattutto damasco) con cui realizza vari modelli di coltelli tradizionali giapponesi. La scelta dei materiali per le finiture (prevalentemente naturali), le linee essenziali - evocatrici dell'utilizzo - e gli accostamenti cromatici di raro impatto rendono le sue realizzazioni uniche e inconfondibili nel panorama della coltelleria mondiale e, in patria, gli sono valse il prestigioso titolo di Maestro.
Destinazione d'uso: Collezione/Sportivo
Tipo di produzione: Artigianale
Produzione Lama: Giappone
Lama: Forgiata a mano, in damasco laminato con tagliente in Hitachi Shirogami a 64HRC
Trattamento Lama: -
Manicatura: Tou-Maki (Rattan arrotolato) e Pitone (pelle di serpente)
Lunghezza lama: 147mm.
Spessore lama: 4.5mm.
Lunghezza chiuso: -
Lunghezza totale: 268mm.
Spessore da chiuso: -
Bilanciatura: -
Peso: 190g.
Chiusura: -
Clip: -
Fodero: Pelle di Pitone
Confezione: Scatola di cartone
Note: interamente realizzati a mano da Takeshi Saji4015PI -
Takeshi Saji - Ugui Sho-Tou - custom knife
Takeshi Saji è nato nel 1948 a Takefu (prefettura di Fukui), una città situata all'incirca nel centro del Giappone e nel cuore di una zona da secoli votata alla produzione di lame. Il suo laboratorio è ancora lì, costruito intorno al forno grazie al quale, ormai da parecchi anni, Takeshi Saji forgia l'acciaio (soprattutto damasco) con cui realizza vari modelli di coltelli tradizionali giapponesi. La scelta dei materiali per le finiture (prevalentemente naturali), le linee essenziali - evocatrici dell'utilizzo - e gli accostamenti cromatici di raro impatto rendono le sue realizzazioni uniche e inconfondibili nel panorama della coltelleria mondiale e, in patria, gli sono valse il prestigioso titolo di Maestro.
Destinazione d'uso: Collezione/Sportivo
Tipo di produzione: Artigianale
Produzione Lama: Giappone
Lama: Forgiata a mano, in acciaio al carbonio Hitachi Shirogami a 64HRC
Trattamento Lama: -
Manicatura: tradizionale giapponese, in pelle di razza e rattan bianco
Lunghezza lama: 80mm.
Spessore lama: 4mm.
Lunghezza chiuso: -
Lunghezza totale: 200mm.
Spessore da chiuso: -
Bilanciatura: -
Peso: 108g.
Chiusura: -
Clip: -
Fodero: Cuoio
Confezione: Scatola di cartone
Note: interamente realizzati a mano da Takeshi Saji4039 -
Takeshi Saji - Yuh-Yuh-Nata - custom knife
Takeshi Saji - Yuh-yuh-Born - custom knife
Intended Use: Collection / Sports / Machete
Type of production: Artisan
Production Lama: Japan
Blade: Hand-forged, carbon steel Hitachi Shirogami to 64HRC
Blade treatment: -
Handle: Wood riveted
Blade length: 200mm.
Blade thickness: 7mm.
Closed Length: -
Overall length: 370mm.
Thick when closed: -
Balancing: -
Weight: 416g.
Closed: -
Clip: -
Sheath: Wood and leather
Packaging: Cardboard Box
Notes: entirely handmade by Takeshi SajiTS-4017 -
Takeshi Saji - Akai Hebi Hanta knife - Red Python - Knife
Takeshi Saji was born in 1948 in Takefu (Fukui prefecture), a city located roughly in the center of Japan and in the heart of an area for centuries devoted to the production of blades. His workshop is still there, built around the oven thanks to which, for several years now, Takeshi Saji has been forging steel (especially damascus) with which he makes various models of traditional Japanese knives. The choice of materials for the finishes (mainly natural), the essential lines - evocative of use - and the chromatic combinations of rare impact make his creations unique and unmistakable in the panorama of world cutlery and, at home, they have earned him the prestigious title of Master.
Intended use: Collection / Sports
Type of production: Artisan
Production Lama: Japan
Blade: Hand forged, laminated damask with 64HRC Hitachi Shirogami cutting edge
Blade treatment: -
Handle: Tou-Maki (Rolled Rattan) and snakeskin
Blade length: 150mm.
Blade thickness: 4.5mm.
Closed Length: -
Total length: 272mm.
Thick when closed: -
Balancing: -
Weight: 192g.
Closing: -
Clip: -
Sheath: Snake Skin
Packaging: Cardboard box
Notes: entirely handmade by Takeshi Saji4015PR