Knives, collection knife, tactical knives, outdoor knives, pocket knives and tools
-
Horl - 2 PRO - diamond and ceramic disc sharpener - Made in Germany
With HORL ® 2 Pro, Otmar and Timo Horl are making a very personal dream come true. With a high precision internal planetary gear, it triples the grinding motion generated by a simple rolling motion. Therefore, HORL ® 2 Pro sharpens at triple speed. The solid components made of stainless steel and aluminum give it a particularly noble appearance.
TWO DISCS
DIAMOND ABRASIVE The industrial diamonds used are suitable for effectively sharpening all steel for knives of any degree of hardness without water. When used correctly, the HORL ® Diamond Standard never needs to be replaced. The 46 μm grain size sharpens efficiently and precisely. In a short time, a high-quality sharpening result is achieved. The discs of the HORL ® 2 CRUISE are not replaceable
CERAMIC SANDING WHEEL After processing with HORL ® Diamond Standard, the ceramic sanding disc noticeably improves the sanding result. Only a few movements are needed for this. The result is a smooth, clean and filigree sharp knife edge.
SUPERIOR EFFICIENCY
Industrial diamonds are considered to be one of the most durable and effective abrasives on the market. Monocrystalline diamonds are harder than any knife steel. Using a galvanic process, the diamonds in the HORL ® Diamond Standard are set at approx. 55% in a nickel bed. After the first grinding processes, the initially rough surface becomes finer and HORL® Diamond Standard achieves the ideal sanding surface.
HOR-2PRO -
Horl - 2 OAK - sharpener with diamond and ceramic disc - Made in Germany
HORL ® 2 is the latest technological benchmark in the HORL ® family of sharpeners. Two sharpening angles and interchangeable grinding discs ensure greater flexibility. A completely new, play-free rolling sensation is created by the integrated ball bearings. The ceramic coating on the smoothing side guarantees impressive finishing results.
TWO DISCS
DIAMOND ABRASIVE The industrial diamonds used are suitable for effectively sharpening all steel for knives of any degree of hardness without water. When used correctly, the HORL ® Diamond Standard never needs to be replaced. The 46 μm grain size sharpens efficiently and precisely. In a short time, a high-quality sharpening result is achieved. The discs of the HORL ® 2 CRUISE are not replaceable
CERAMIC SANDING WHEEL After processing with HORL ® Diamond Standard, the ceramic sanding disc noticeably improves the sanding result. Only a few movements are needed for this. The result is a smooth, clean and filigree sharp knife edge.
SUPERIOR EFFICIENCY
Industrial diamonds are considered to be one of the most durable and effective abrasives on the market. Monocrystalline diamonds are harder than any knife steel. Using a galvanic process, the diamonds in the HORL ® Diamond Standard are set at approx. 55% in a nickel bed. After the first grinding processes, the initially rough surface becomes finer and HORL® Diamond Standard achieves the ideal sanding surface.
HOR-2QUERCIA -
Horl - 2 WALNUT - sharpener with diamond and ceramic disc - Made in Germany
HORL ® 2 is the latest technological benchmark in the HORL ® family of sharpeners. Two sharpening angles and interchangeable grinding discs ensure greater flexibility. A completely new, play-free rolling sensation is created by the integrated ball bearings. The ceramic coating on the smoothing side guarantees impressive finishing results.
TWO DISCS
DIAMOND ABRASIVE The industrial diamonds used are suitable for effectively sharpening all steel for knives of any degree of hardness without water. When used correctly, the HORL ® Diamond Standard never needs to be replaced. The 46 μm grain size sharpens efficiently and precisely. In a short time, a high-quality sharpening result is achieved. The discs of the HORL ® 2 CRUISE are not replaceable
CERAMIC SANDING WHEEL After processing with HORL ® Diamond Standard, the ceramic sanding disc noticeably improves the sanding result. Only a few movements are needed for this. The result is a smooth, clean and filigree sharp knife edge.
SUPERIOR EFFICIENCY
Industrial diamonds are considered to be one of the most durable and effective abrasives on the market. Monocrystalline diamonds are harder than any knife steel. Using a galvanic process, the diamonds in the HORL ® Diamond Standard are set at approx. 55% in a nickel bed. After the first grinding processes, the initially rough surface becomes finer and HORL® Diamond Standard achieves the ideal sanding surface.
HOR-2NOCE -
Horl - 2 CRUISE - sharpener with diamond and steel disc - Made in Germany
The HORL ® 2 CRUISE incorporates our state of the art development with a focus on the essential. A constant sharpening angle, our durable diamond coating and a beautiful "chalk" color make HORL ® 2 CRUISE an all-round talent for sharpness in any kitchen. The 20 ° sharpening angle produces fast sharpening results and a stable cutting edge with long-lasting sharpening.
TWO DISCS
DIAMOND ABRASIVE The industrial diamonds used are suitable for effectively sharpening all steel for knives of any degree of hardness without water. When used correctly, the HORL ® Diamond Standard never needs to be replaced. The 46 μm grain size sharpens efficiently and precisely. In a short time, a high-quality sharpening result is achieved. The discs of the HORL ® 2 CRUISE are not replaceable
FOR STAINLESS STEEL SANDING After the sharpening process with the diamond disc, the stainless steel sanding disc smoothes the blade and removes any burrs with the help of its integrated grooves. Only a few movements are needed. The discs of the HORL ® 2 CRUISE are not editable
SUPERIOR EFFICIENCY
Industrial diamonds are considered to be one of the most durable and effective abrasives on the market. Monocrystalline diamonds are harder than any knife steel. Using a galvanic process, the diamonds in the HORL ® Diamond Standard are set at approx. 55% in a nickel bed. After the first grinding processes, the initially rough surface becomes finer and HORL® Diamond Standard achieves the ideal sanding surface.
20 ° SHARPENING ANGLE FOR STABLE SHARPNESS
The 20 ° sharpening angle offers a new sharpness in the shortest possible time. The knife also maintains its sharpness for a long time thanks to the stable cutting edge and is suitable for the widest range of cuts in everyday life in the kitchen. Also excellent for sharpening knives for sports and outdoor use.
THE HORL ® S-PAD FOR CONTINUOUS FLEXIBILITY IN GRINDING
The combination of powerful neodymium magnets and the HORL ® S-Pad ensure that the knife is firmly fixed when sharpening. Reinforced by the non-slip effect of the S-Pad, even small blades can be sharpened correctly by adapting them to the desired height.
HOR-2CRUISE -
Horl - premium sharpening set - 3000 and 6000 stones - strop - SET - Made in Germany
Set consisting of two discs of sharpening stones with # 3000 and # 6000 grit and a leather strop to be used at the end to free the blade of all grinding residues and provide the final sharpening.
The set is designed to further refine the result of the sharpening process after using the diamond and ceramic discs, which are standard in HORL ® sharpeners.
The two discs are simply screwed onto the sharpener instead of the stock ones and are intended to refine the edge of the blade of your high-level knives. The stones can be used without water.
Compatible with HORL ® Sharpener 1. Gen, HORL ® 2 and HORL ® 2 PRO.
This item is not compatible with HORL ® 2 CRUISE.
Strop: Measurements: 25 x 5 cm - Thickness: 5mm
HOR-SET -
Horl - strip of cowhide for sharpening - strop - AL-P - Made in Germany
Original HORL ® leather made from vegetable tanned cowhide for a professional finish after sharpening. Thanks to its fine-pored surface, the blade is perfectly freed from even the finest residues on the edge after sharpening on stone.
Measurements: 25 x 5 cm - Thickness: 5mm
HOR-AL-P -
Wildrock Gear - Strikeback Tomahawk Black - D2 steel - ax
Strikeback Tomahawk is designed to work in any condition. Built and designed for heavy use, the Strikeback, thanks to its simple and clean design, manages to perfectly combine balancing and maneuverability characteristics. The body is made of high quality D2 steel and is skeletonized to help reduce weight and improve structural rigidity and balance. The Gun-kote surface coating increases its wear resistance and protects against corrosion.
Intended use: Tactical / Allround
Type of production: industrial
Blade: Bohler D2 steel (56 Hrc)
Blade treatment: Gun-kote
Lama production: Italy
Handle: G-10 Black
Head length: 199mm.
Blade thickness: 8mm.
Blade length: 101mm.
Total length: 400mm.
Balancing: -
Weight: 1080g.
Closing: -
Clip: -
Sheath: Compatible soft Kydex sheath
Use: Cutting | Hammering | Digging | Breaking | SmashingWRK-TOM-B -
Steel Will - Piercer Knife Frame by Tommaso Rumici - D2 Satin - F40-61 - knife
Intended use: Tactical / EDC
Type of production: Industrial
Country of production: China
Blade: in steel tool D2
Blade treatment: Satin finish
Handle: in G10, frame and spacer in titanium
Blade length: 85mm.
Blade thickness: 3mm.
Length closed: 114mm.
Total length: 195mm.
Thick when closed: 12mm.
Weight: 110g.
Opening: through a slot cut on the blade
Washers: brass
Closure: liner lock
Clip: stainless steel, deep pocket type, removable and reversible
Packaging: Cardboard box with Steel Will Knives logos
Notes: Design by Tommaso RumiciSW-F40-61€106.56Only 0 leftOut of stock -
Steel Will - Piercer Knife Liner by Tommaso Rumici - D2 Blackwash - F40-09 - Knife
Intended use: Tactical / EDC
Type of production: Industrial
Country of production: China
Blade: in steel tool D2
Blade treatment: Blackwashed
Handle: in G10, internal stainless steel liners, titanium spacer
Blade length: 85mm.
Blade thickness: 3mm.
Length closed: 114mm.
Total length: 195mm.
Thick when closed: 12mm.
Weight: 98g.
Opening: through a slot cut on the blade
Washers: brass
Closure: liner lock
Clip: stainless steel, deep pocket type, removable and reversible
Packaging: Cardboard box with Steel Will Knives logos
Notes: Design by Tommaso RumiciSW-F40-09€65.57Out of stock -
A.T.C. - American Tomahawk Company - Emerson CQC-T
Destinazione d'uso: Militare/Tattico
Tipo di produzione: Industriale
Produzione Lama: U.S.A.
Lama: lega di acciaio 4140 ad alto tenore di carbonio a 54/55 HRC, lavorata a controllo numerico
Trattamento Lama: verniciatura epossidica
Manicatura: in Nylon rinforzato, spessore 25mm, con anelli di ritenzione
Lunghezza lama: 69x198mm.
Spessore lama: 5.4mm.
Lunghezza chiuso -
Lunghezza totale: 362mm.
Spessore da chiuso: -
Bilanciatura: -
Peso: 556g.
Chiusura: -
Clip: -
Fodero: in Nylon, con attacchi M.O.L.L.E. multiposizione e sganci rapidi di apertura
Confezione: -
Note: design by Ernest Emerson3740 -
A.T.C. - American Tomahawk Company - Fox Fighting Tomahawk - FX-ATC02
Destinazione d'uso: Tattico/Allround
Tipo di produzione: industriale
Lama: in acciaio inox N690Co 58/60HRC
Trattamento Lama: Teflonatura Opaca Nera
Produzione Lama: Italia
Manicatura: G-10 OD Green
Lunghezza lama: 95mm.
Spessore della lama: 5mm.
Lunghezza chiuso: -
Lunghezza totale: 360x220mm.
Bilanciatura: -
Peso: 810g.
Chiusura: -
Clip: -
Fodero: Cordura Verde 1100D
Note: Design by Sibert - Prodotto commissionato dall'americana Tomahawk Company, specializzata in questa tipologia di articoli - Adatta ad usi estremi - Adatta per il lancio.5747 -
A.T.C. - American Tomahawk Company - LaGana Tactical Tomahawk
Destinazione d'uso: militare/tattico
Tipo di produzione: industriale
Produzione Lama: america
Lama: in acciaio al carbonio 1060 52/54HRC
Trattamento Lama: verniciatura epossidica
Manicatura: ST (Super Tough) Nylon
Dimensioni lama: 60x205mm.
Lunghezza totale: 350mm.
Peso: 525g.
Chiusura: -
Clip: -
Fodero: in nylon, con attacchi M.O.L.L.E.
Note: Design by Peter LaGana2726 -
LoneWolf - Black Talon - coltello
Destinazione d'uso: Tattico
Tipo di produzione: industriale
Lama: in acciaio inox CPM-S30V
Trattamento Lama: -
Produzione Lama: USA
Manicatura: nylon
Lunghezza lama: 83mm.
Spessore della lama: 3mm.
Lunghezza chiuso: 80mm
Lunghezza totale: 190mm.
Bilanciatura: -
Peso: 108g.
Chiusura: Liner Lock
Clip: Acciaio Inox
Fodero: -2790 -
LoneWolf - Dark Raven Combo - knife
Intended Use: Tactical
Type of production: industrial
Blade: stainless steel CPM-S30V
Treatment Lama: -
Production Lama USA
Handle material: G10
Blade length: 75mm.
Blade Thickness: 3mm.
Closed Length: 75mm
Total length: 175mm.
Balance: -
Weight: 110g.
Lock: Liner Lock
Clip: Stainless Steel
Sheath: -2791 -
LoneWolf - Loveless City - Buffalo Horn
Destinazione d'uso: coltello da tasca
Tipo di produzione: industriale
Lama: in acciaio inox 19C27
Trattamento Lama: -
Manicatura: Corno di Bufalo
Lunghezza lama: 60mm.
Spessore della lama: 2.5mm.
Lunghezza chiuso: 95mm.
Lunghezza totale: 160mm.
Bilanciatura: -
Peso: 65g.
Chiusura: -
Clip: -
Fodero: -
Note: scatola in alluminio1320 -
LoneWolf - Loveless City - Micarta knife
LoneWolf - Loveless City - Micarta knife
Intended use: Pocket Knife
Type of production: industrial
Blade: stainless steel 19c27
Treatment Blade: -
Handle: micarta loveless
Blade length: 60mm.
Blade Thickness: 2.5mm.
Closed Length: 95mm.
Overall length: 160mm.
Balancing: -
Weight: 65g.
Closure: -
Clip: -
Notes: aluminum box1318 -
LoneWolf - Loveless Clip Point Folder - knife
LoneWolf - Loveless Clip Point Folder - knife
Intended use: Sport
Type of production: Industrial
Production Blade: Italy
Blade: 154CM stainless steel
Treatment Blade: -
Handle: Micarta
Blade length: 75mm.
Blade thickness: 3mm.
Length closed: -
Overall length: 190mm.
Thick when closed: -
Balancing: -
Weight: 128g.
Lock: Liner Lock
Clip: -
Sheath: Leather
Packaging: cardboard box with logos Lonewolf
Notes: Design by Loveless1309 -
LoneWolf - Loveless Drop Point Fixed - coltello
Coltello fuori produzione dal 2009 - ultimo ed unico esemplare disponibile a magazzino
Destinazione d'uso: Sportivo/Caccia/Collezione
Tipo di produzione: Industriale
Produzione Lama: Italia
Lama: In acciaio inox 440B
Trattamento Lama: -
Manicatura: Micarta
Lunghezza lama: 95mm.
Spessore lama: 3mm.
Lunghezza chiuso: -
Lunghezza totale: 210mm.
Spessore da chiuso: -
Bilanciatura: -
Peso: 180g.
Chiusura: -
Clip: -
Fodero: in cuoio
Confezione: scatola in cartone con loghi Lonewolf
Note: Design by Bob Loveless2431 -
LoneWolf - Loveless Drop Point Folder - coltello
Destinazione d'uso: Sportivo
Tipo di produzione: Industriale
Produzione Lama: Italia
Lama: In acciaio inox 154CM
Trattamento Lama: -
Manicatura: Micarta
Lunghezza lama: 75mm.
Spessore lama: 3mm.
Lunghezza chiuso: -
Lunghezza totale: 190mm.
Spessore da chiuso: -
Bilanciatura: -
Peso: 136g.
Chiusura: Liner Lock
Clip: -
Fodero: in cuoio
Confezione: scatola in cartone con loghi Lonewolf
Note: Design by Loveless1308 -
LoneWolf - Loveless Drop Point Folder - David Yellowhorse Limited Edition
Destinazione d'uso: Sportivo
Tipo di produzione: Impugnatura Artigianale, Lama Industriale
Produzione Lama: Italia by Fantoni
Lama: In acciaio inox 154CM 58HRC
Trattamento Lama: -
Manicatura: Lavorazione artigianale a mosaico, in pietra dura, di David Yellowhorse
Lunghezza lama: 75mm.
Spessore lama: 3mm.
Lunghezza chiuso: -
Lunghezza totale: 190mm.
Spessore da chiuso: -
Bilanciatura: -
Peso: 128g.
Chiusura: Liner Lock
Clip: -
Fodero: in cuoio
Confezione: cofanetto da collezione con loghi Lonewolf, Fantoni e David Yellowhorse; certificati di garanzia
Note: Edizione limitata prodotta in soli 6 esemplari - Design lama by Bob Loveless2795