Knives, collection knife, tactical knives, outdoor knives, pocket knives and tools

Intended Use: Collection / Heavy Duty

Production type: Handcrafted
Country of Production: Italy
Blade: D2 steel at 59/61HRC with cryogenic hardening
Blade treatment: Black Blood
Handle: 2mm titanium folders with micarta handle
Blade length: 93mm.
Blade thickness: 5mm.
Length closed: 124mm.
Total length: 214mm.
Thickness when closed: 21mm.
Weight: 186g.
Opening: Carson Flipper system / Ambidextrous opening pins on blade.
Closure: Rockers Arm 8.11
Clip: stone washed titanium, removable and reversible
Packaging: plastic pouch with Wander Tactical logos
Notes: Limited Edition, produced entirely by hand, each example differs from the previous one in aesthetic finishes

KNIFE WITHDRAWAL FROM A PRIVATE COLLECTION
* Type: Previously purchased
* Conditions: Like new
* Commercially available: Discontinued, model dating back to 2019
* Sharpening: Factory
* Marks on blade: No
* Marks on the handle: No
* Box: WT original packaging
* Sheath: -
* Manuals, Certificates and Warranties: WT certificate
* Checked and certified by our internal laboratory

Intended use: Collection / Heavy Duty

Type of production: Artisan
Country of production: Italy
Blade: in D2 steel at 59 / 61HRC with cryogenic hardening
Blade treatment: Raw
Handle: 2mm titanium folders with micarta handle
Blade length: 93mm.
Blade thickness: 5mm.
Closed length: 124mm.
Total length: 214mm.
Thick when closed: 21mm.
Weight: 186g.
Opening: Carson Flipper system / Ambidextrous opening pins on the blade
Closing: Rockers Arm 8.11
Clip: in stone washed titanium, removable and reversible
Packaging: Plastic case with Wander Tactical logos
Notes: Limited Edition, produced entirely by hand, each piece differs from the previous one in aesthetic finishes

Intended use: sports / collection

Type of production: Artisan
Production Lama: Cambodia
Blade: in DNH7 carbon steel with 40 / 60HRC selective hardening
Blade treatment: -
Handle: Water Buffalo Horn
Blade length: 95mm.
Blade thickness: 4mm.
Closed length: 137mm.
Total length: 205mm.
Thick when closed: 23mm.
Balancing: -
Weight: 146 g.
Closure: folding with friction
Clip: -
Sheath: Cordura bag
Packaging: -
Note: -

NOTE - "one of a kind" knife, featuring an entirely handcrafted blade with dual finish: Raw and Satin

Intended Use: Heavy Duty / Hiking / Tactical / Collection

Type of production: Midtech (handcrafted blade and handle - industrial folders)
Country of Production: Italy
Blade: D2 steel at 59/61HRC with cryogenic hardening
Blade treatment: Raw and Satin
Handle: titanium folders with micarta handle
Blade length: 90mm.
Blade thickness: 5mm.
Length closed: 120mm.
Total length: 210mm.
Weight: 150g.
Opening: Carson Flipper system / ambidextrous opening pins on the blade
Washers: steel, with ball bearings made in Japan
Closure: Rockers Arm 8.11
Clip: stainless steel, removable and reversible
Packaging: plastic case with Wander Tactical logos
Notes: "one of a kind" knife

Intended use: Heavy Duty / Hiking / Tactical / Collection

Production type: industrial
Country of production: Italy
Blade: D2 steel at 59/61HRC with cryogenic hardening
Blade treatment: Black DLC
Handle: Titanium folders with micarta grip
Blade length: 90mm.
Blade thickness: 5mm.
Length closed: 120mm.
Total lenght: 210mm.
Thickness when closed: 13,6mm.
Weight: 164g.
Closure: Rockers Arm 8.11 with additional screw safety pin, removable
Clip: Titanium, removable and reversible
Package: Plastic box with Wander Tactical logos, warranty certificate, safety pin
Notes: 4th generation, production 2021 

Intended Use: Collection / Heavy Duty

Kind of production: Handmade
Country of Production: Italy
Blade: D2 steel at 59/61HRC with cryogenic hardening
Blade treatment: Raw
Handle: 2mm titanium folder with micarta handle
Blade length: 95mm.
Blade thickness: 5mm.
Length closed: 124mm.
Total lenght: 214mm.
Thickness when closed: 24mm.
Weight: 193g.
Opening: Carson Flipper system / Ambidextrous opening pins on the blade.
Closure: Rockers Arm 8.11
Clip: titanium stone washed, removable and reversible
Package: Plastic case with Wander Tactical logos
Notes: Limited Edition, entirely hand made, each piece is different from the previous one for aesthetic finishing.

Intended Use: Collection / Heavy Duty

Kind of production: Handmade
Country of Production: Italy
Blade: D2 steel at 59/61HRC with cryogenic hardening
Blade treatment: Raw
Handle: 2mm titanium folder with micarta handle
Blade length: 95mm.
Blade thickness: 5mm.
Length closed: 124mm.
Total lenght: 214mm.
Thickness when closed: 24mm.
Weight: 193g.
Opening: Carson Flipper system / Ambidextrous opening pins on the blade.
Closure: Rockers Arm 8.11
Clip: titanium stone washed, removable and reversible
Package: Plastic case with Wander Tactical logos
Notes: Limited Edition, entirely hand made, each piece is different from the previous one for aesthetic finishing.

Intended use: Heavy Duty / Hiking / Tactical / Collection

Type of production: industrial
Country of production: Italy
Blade: in D2 steel at 59 / 61HRC with cryogenic tempering
Blade treatment: Black
Handle: titanium folders with aluminum handle
Blade length: 90mm.
Blade thickness: 5mm.
Closed length: 120mm.
Total length: 210mm.
Thick when closed: 13.6mm.
Balancing: -
Weight: 160g.
Opening: Carson Flipper system / ambidextrous opening pins on the blade
Washers: in steel, with ball bearings made in Japan
Closing: Rockers Arm 8.11
Clip: titanium, removable and reversible
Sheath: -
Packaging: Plastic case with Wander Tactical logos
Notes: 3rd generation 2019 production

Type of production: Artisan
Production Lama: Italy
Blade: in D2 steel at 59 / 60HRC
Blade treatment: Black Blood
Handle: Green Paracord
Head Size: 90mm (cutting edge) x 208mm
Thickness: 6.5mm.
Total length: 370mm.
Balancing: advanced
Weight: 943g. (1.080g. With scabbard)
Sheath: in Kydex, thermoformed
Packaging: -
Note:

Japanese steel blends with Italian excellence

For this 2019/2020 collaboration, exclusive of Collini Cutlery, we have decided to propose a series of best sellers produced by Wander Tactical. Knives made with the famous San Mai steel produced by the Japanese Takefu Steel. Specifically, we used V-Toku2 carbonaceous at 62 / 63HRC for the central plate and SUS410 stainless steel for the two external plates, in order to guarantee a very high cutting capacity, penetration and sealing of the wire together with an easy regrinding and maintenance but at the same time the blade has a remarkable resistance to corrosion and an important increase in resilience given by the type of external steel and by the laminated structure.

RAPTOR model:

Use: Tactical / Utility

Type of production: Artisan
Production Lama: Italy
Blade: integral, laminated Japanese steel (San Mai) with V-Toku2 (carbonaceous) cutting edge at 62 / 63HRC and SUS410 (stainless steel) external scales
Blade finish: satin finish
Handle: Paracord
Blade length: 75mm.
Blade thickness: 6.5mm.
Total length: 178mm.
Balancing: set back
Weight: 149g.
Sheath: in brown kydex
Packaging: -
Notes: Each knife is unique and handcrafted - Wander Tactical certified

As in the ancient Japanese Samurai swords.

The rolled steel - imported into Italy by Collini Steel directly from the Japanese Takefu Steel - is based on the ancient Japanese tradition in the creation of the famous Samurai swords. In fact, as early as 1100 the expert Japanese blacksmiths combined different materials together to give the Katana swords incredible cutting abilities combined with a resistance and flexibility previously unknown. It is thanks to this revolutionary construction technique that Samurai swords have been preserved to this day, becoming one of the most fascinating objects made by man. Following this tradition applied to modern metallurgy, today we are able to have technologically advanced steels already tested and used in cutlery also by famous brands such as Fallkniven, Cold Steel, Mcusta, Kai, Sog, Zwilling, Rockstead, etc.

Characteristics of San Mai steel: These are different types of metals bonded together to create a composite that encloses and intensifies the strengths of the metals individually taken:

- Longer life of the cutting edge

thanks to the use of very high quality steels with high carbon content (VG10, CoS, Shiro) or sintered (SPG2), in the heart of the sheet (Core Steel), the blade, once hardened, achieves decidedly hardness and cutting performance higher than those achieved with the use of traditional steels.

- Greater resilience
built on the principle of Japanese swords, multilayer steel is difficult to break thanks to the toughness of the central steel (Core Steel) and the elasticity of the steel used for the side facing (Stainless Steel).

- Better corrosion resistance
the steel used for the external layers (Stainless Steel) guarantees the blade a high resistance to corrosion. The combination of the two or more materials used by Takefu Steel generates, on a galvanic level, a structure that improves corrosion resistance even on the wire.

- Easy processing even after heat treatment
although the steel normally becomes harder after hardening, the side steel used in multilayer processing does not lose its softness and allows easy processing, drilling or welding even after heat treatment. For an optimal performance of the blade, cryogenic treatment is recommended.

- Improvement of the aesthetic result
The knives made with multi-state steel or damascus pattern at the end of the processing are aesthetically elegant, refined and highly appreciated by collectors all over the world.

For more information: collinisteel

Japanese steel blends with Italian excellence

For this 2019/2020 collaboration, exclusive of Collini Cutlery, we have decided to propose a series of best sellers produced by Wander Tactical. Knives made with the famous San Mai steel produced by the Japanese Takefu Steel. Specifically, we used V-Toku2 carbonaceous at 62 / 63HRC for the central plate and SUS410 stainless steel for the two external plates, in order to guarantee a very high cutting capacity, penetration and sealing of the wire together with an easy regrinding. and maintenance but at the same time the blade has a remarkable resistance to corrosion and an important increase in resilience given by the type of extrene steel and by the laminated structure.

RAPTOR model:

Use: Tactical / Utility

Type of production: Artisan
Production Lama: Italy
Blade: integral, laminated Japanese steel (San Mai) with V-Toku2 (carbonaceous) cutting edge at 62 / 63HRC and SUS410 (stainless steel) external scales
Blade finish: satin finish
Handle: Paracord
Blade length: 75mm.
Blade thickness: 6.5mm.
Total length: 178mm.
Balancing: set back
Weight: 149g.
Sheath: in green kydex
Packaging: -
Notes: Each knife is unique and handcrafted - Wander Tactical certified

As in the ancient Japanese Samurai swords.

The rolled steel - imported into Italy by Collini Steel directly from the Japanese Takefu Steel - is based on the ancient Japanese tradition in the creation of the famous Samurai swords. In fact, as early as 1100 the expert Japanese blacksmiths combined different materials together to give the Katana swords incredible cutting abilities combined with a resistance and flexibility previously unknown. It is thanks to this revolutionary construction technique that Samurai swords have been preserved to this day, becoming one of the most fascinating objects made by man. Following this tradition applied to modern metallurgy, today we are able to have technologically advanced steels already tested and used in cutlery also by famous brands such as Fallkniven, Cold Steel, Mcusta, Kai, Sog, Zwilling, Rockstead, etc.

Characteristics of San Mai steel: These are different types of metals bonded together to create a composite that encloses and intensifies the strengths of the metals individually taken:

- Longer tool life

thanks to the use of very high quality steels with high carbon content (VG10, CoS, Shiro) or sintered (SPG2), in the heart of the sheet (Core Steel), the blade, once hardened, achieves decidedly hardness and cutting performance higher than those achieved with the use of traditional steels.

- Greater resilience
built on the principle of Japanese swords, multilayer steel is difficult to break thanks to the toughness of the central steel (Core Steel) and the elasticity of the steel used for the side facing (Stainless Steel).

- Better corrosion resistance
the steel used for the external layers (Stainless Steel) guarantees the blade a high resistance to corrosion. The combination of the two or more materials used by Takefu Steel generates, on a galvanic level, a structure that improves corrosion resistance even on the wire.

- Easy processing even after heat treatment
although the steel normally becomes harder after hardening, the side steel used in multilayer processing does not lose its softness and allows easy processing, drilling or welding even after heat treatment. For an optimal performance of the blade, cryogenic treatment is recommended.

- Improvement of the aesthetic result
The knives made with multi-state steel or with a damask pattern at the end of the processing are aesthetically elegant, refined and highly appreciated by collectors all over the world.

For more information: collinisteel

Japanese steel merges with Italian excellence

For this 2019/2020 collaboration, exclusive to Collini Cutlery, we have decided to offer a series of best sellers produced by Wander Tactical. Knives made with the famous San Mai steel produced by the Japanese Takefu Steel. Specifically, for the central sheet we used the carbonaceous V-Toku2 at 62 / 63HRC and the stainless SUS410 for the two external sheets, in order to guarantee a very high cutting, penetration and sealing capacity of the wire together with an ease of regrinding and maintenance but at the same time the blade has a remarkable resistance to corrosion and an important increase in resilience given by the type of foreign steel and the laminated structure.

SCRAMBLER Model .:

Occupation: Tactical / Utility

Type of production: Artisan
Lama production: Italy
Blade: integral, in Japanese laminated steel (San Mai) with cutting edge in V-Toku2 (carbon) at 62 / 63HRC and external cheeks in SUS410 (stainless steel)
Blade finish: satin finish
Handle: Micarta
Blade length: 95mm.
Blade thickness: 6.5mm.
Total length: 210mm.
Balancing: backward
Weight: 212g.
Sheath: brown kydex
Packaging: -
Notes: Each knife is unique and handcrafted - Wander Tactical certified

As in the ancient swords of the Japanese Samurai.

Rolled steel - imported into Italy from Collini Steel directly from the Japanese Takefu Steel - is based on the ancient Japanese tradition in the creation of the famous Samurai swords. Already in 1100 the expert Japanese blacksmiths in fact combined different materials to give the Katana swords incredible cutting capabilities combined with a resistance and flexibility previously unknown. It is thanks to this revolutionary construction technique that the swords from Samurai have been preserved to the present day becoming one of the most fascinating objects made by man. Following this tradition applied to modern metallurgy, we are now able to have technologically advanced steels already tested and used in cutlery also by famous brands such as Fallkniven, Cold Steel, Mcusta, Kai, Sog, Zwilling, Rockstead, etc.

Characteristics of San Mai steel: These are different types of metals bonded together to create a composite that encloses and intensifies the strengths of the metals taken individually:

- Longer tool life
thanks to the use of high quality steel with a high carbon content (VG10, CoS, Shiro) or sintered (SPG2), in the heart of the sheet (Core Steel), the blade once hardened, achieves hardness and cutting performance decidedly higher than those achieved with the use of traditional steels.

- Greater resilience
built with the principle of Japanese swords, multilayer steel is difficult to break thanks to the toughness of the central steel (Core Steel) and the elasticity of the steel used for the lateral coating (Stainless Steel).

- Better corrosion resistance
the steel used for the external layers (Stainless Steel) guarantees the blade a high resistance to corrosion. The combination of the two or more materials used by Takefu Steel generates, at the galvanic level, a structure that improves the corrosion resistance also on the wire.

- Easy processing even after heat treatment
although normally the steel becomes harder after hardening, the lateral steel used in multi-layer processing does not lose its softness and allows easy processing, drilling or welding even after heat treatment. For optimum performance of the blade, cryogenic treatment is recommended.

- Improvement of the aesthetic result
The knives made with multistate steel or with a damask pattern at the end of the processing are aesthetically elegant, refined and highly appreciated by collectors all over the world.

For more information: collinisteel

Japanese steel merges with Italian excellence

For this 2019/2020 collaboration, exclusive to Collini Cutlery, we have decided to offer a series of best sellers produced by Wander Tactical. Knives made with the famous San Mai steel produced by the Japanese Takefu Steel. Specifically, for the central sheet we used the carbonaceous V-Toku2 at 62 / 63HRC and the stainless SUS410 for the two external sheets, in order to guarantee a very high cutting, penetration and sealing capacity of the wire together with an ease of regrinding and maintenance but at the same time the blade has a remarkable resistance to corrosion and an important increase in resilience given by the type of foreign steel and the laminated structure.

RAPTOR model:

Occupation: Tactical / Utility

Type of production: Artisan
Lama production: Italy
Blade: integral, in Japanese laminated steel (San Mai) with cutting edge in V-Toku2 (carbon) at 62 / 63HRC and external cheeks in SUS410 (stainless steel)
Blade finish: satin finish
Handle: Paracord
Blade length: 75mm.
Blade thickness: 6.5mm.
Total length: 178mm.
Balancing: backward
Weight: 136g.
Sheath: black kydex
Packaging: -
Notes: Each knife is unique and handcrafted - Wander Tactical certified

As in the ancient swords of the Japanese Samurai.

Rolled steel - imported into Italy from Collini Steel directly from the Japanese Takefu Steel - is based on the ancient Japanese tradition in the creation of the famous Samurai swords. Already in 1100 the expert Japanese blacksmiths in fact combined different materials to give the Katana swords incredible cutting capabilities combined with a resistance and flexibility previously unknown. It is thanks to this revolutionary construction technique that the swords from Samurai have been preserved to the present day becoming one of the most fascinating objects made by man. Following this tradition applied to modern metallurgy, we are now able to have technologically advanced steels already tested and used in cutlery also by famous brands such as Fallkniven, Cold Steel, Mcusta, Kai, Sog, Zwilling, Rockstead, etc.

Characteristics of San Mai steel: These are different types of metals bonded together to create a composite that encloses and intensifies the strengths of the metals taken individually:

- Longer tool life
thanks to the use of high quality steel with a high carbon content (VG10, CoS, Shiro) or sintered (SPG2), in the heart of the sheet (Core Steel), the blade once hardened, achieves hardness and cutting performance decidedly higher than those achieved with the use of traditional steels.

- Greater resilience
built with the principle of Japanese swords, multilayer steel is difficult to break thanks to the toughness of the central steel (Core Steel) and the elasticity of the steel used for the lateral coating (Stainless Steel).

- Better corrosion resistance
the steel used for the external layers (Stainless Steel) guarantees the blade a high resistance to corrosion. The combination of the two or more materials used by Takefu Steel generates, at the galvanic level, a structure that improves the corrosion resistance also on the wire.

- Easy processing even after heat treatment
although normally the steel becomes harder after hardening, the lateral steel used in multi-layer processing does not lose its softness and allows easy processing, drilling or welding even after heat treatment. For optimum performance of the blade, cryogenic treatment is recommended.

- Improvement of the aesthetic result
The knives made with multistate steel or with a damask pattern at the end of the processing are aesthetically elegant, refined and highly appreciated by collectors all over the world.

For more information: collinisteel

Japanese steel merges with Italian excellence

For this 2019/2020 collaboration, exclusive to Collini Cutlery, we have decided to offer a series of best sellers produced by Wander Tactical. Knives made with the famous San Mai steel produced by the Japanese Takefu Steel. Specifically, for the central sheet we used the carbonaceous V-Toku2 at 62 / 63HRC and the stainless SUS410 for the two external sheets, in order to guarantee a very high cutting, penetration and sealing capacity of the wire together with an ease of regrinding and maintenance but at the same time the blade has a remarkable resistance to corrosion and an important increase in resilience given by the type of foreign steel and the laminated structure.

RAPTOR model:

Occupation: Tactical / Utility

Type of production: Artisan
Lama production: Italy
Blade: integral, in Japanese laminated steel (San Mai) with cutting edge in V-Toku2 (carbon) at 62 / 63HRC and external cheeks in SUS410 (stainless steel)
Blade finish: satin finish
Handle: Paracord
Blade length: 75mm.
Blade thickness: 6.5mm.
Total length: 178mm.
Balancing: backward
Weight: 136g.
Sheath: black kydex
Packaging: -
Notes: Each knife is unique and handcrafted - Wander Tactical certified

As in the ancient swords of the Japanese Samurai.

Rolled steel - imported into Italy from Collini Steel directly from the Japanese Takefu Steel - is based on the ancient Japanese tradition in the creation of the famous Samurai swords. Already in 1100 the expert Japanese blacksmiths in fact combined different materials to give the Katana swords incredible cutting capabilities combined with a resistance and flexibility previously unknown. It is thanks to this revolutionary construction technique that the swords from Samurai have been preserved to the present day becoming one of the most fascinating objects made by man. Following this tradition applied to modern metallurgy, we are now able to have technologically advanced steels already tested and used in cutlery also by famous brands such as Fallkniven, Cold Steel, Mcusta, Kai, Sog, Zwilling, Rockstead, etc.

Characteristics of San Mai steel: These are different types of metals bonded together to create a composite that encloses and intensifies the strengths of the metals taken individually:

- Longer tool life
thanks to the use of high quality steel with a high carbon content (VG10, CoS, Shiro) or sintered (SPG2), in the heart of the sheet (Core Steel), the blade once hardened, achieves hardness and cutting performance decidedly higher than those achieved with the use of traditional steels.

- Greater resilience
built with the principle of Japanese swords, multilayer steel is difficult to break thanks to the toughness of the central steel (Core Steel) and the elasticity of the steel used for the lateral coating (Stainless Steel).

- Better corrosion resistance
the steel used for the external layers (Stainless Steel) guarantees the blade a high resistance to corrosion. The combination of the two or more materials used by Takefu Steel generates, at the galvanic level, a structure that improves the corrosion resistance also on the wire.

- Easy processing even after heat treatment
although normally the steel becomes harder after hardening, the lateral steel used in multi-layer processing does not lose its softness and allows easy processing, drilling or welding even after heat treatment. For optimum performance of the blade, cryogenic treatment is recommended.

- Improvement of the aesthetic result
The knives made with multistate steel or with a damask pattern at the end of the processing are aesthetically elegant, refined and highly appreciated by collectors all over the world.

For more information: collinisteel

Japanese steel merges with Italian excellence

For this 2019/2020 collaboration, exclusive to Collini Cutlery, we have decided to offer a series of best sellers produced by Wander Tactical. Knives made with the famous San Mai steel produced by the Japanese Takefu Steel. Specifically, for the central sheet we used the carbonaceous V-Toku2 at 62 / 63HRC and the stainless SUS410 for the two external sheets, in order to guarantee a very high cutting, penetration and sealing capacity of the wire together with an ease of regrinding and maintenance but at the same time the blade has a remarkable resistance to corrosion and an important increase in resilience given by the type of foreign steel and the laminated structure.

SCRAMBLER Model .:

Occupation: Tactical / Utility

Type of production: Artisan
Lama production: Italy
Blade: integral, in Japanese laminated steel (San Mai) with cutting edge in V-Toku2 (carbon) at 62 / 63HRC and external cheeks in SUS410 (stainless steel)
Blade finish: satin finish
Handle: Micarta
Blade length: 95mm.
Blade thickness: 6.5mm.
Total length: 210mm.
Balancing: backward
Weight: 212g.
Sheath: brown kydex
Packaging: -
Notes: Each knife is unique and handcrafted - Wander Tactical certified

As in the ancient swords of the Japanese Samurai.

Rolled steel - imported into Italy from Collini Steel directly from the Japanese Takefu Steel - is based on the ancient Japanese tradition in the creation of the famous Samurai swords. Already in 1100 the expert Japanese blacksmiths in fact combined different materials to give the Katana swords incredible cutting capabilities combined with a resistance and flexibility previously unknown. It is thanks to this revolutionary construction technique that the swords from Samurai have been preserved to the present day becoming one of the most fascinating objects made by man. Following this tradition applied to modern metallurgy, we are now able to have technologically advanced steels already tested and used in cutlery also by famous brands such as Fallkniven, Cold Steel, Mcusta, Kai, Sog, Zwilling, Rockstead, etc.

Characteristics of San Mai steel: These are different types of metals bonded together to create a composite that encloses and intensifies the strengths of the metals taken individually:

- Longer tool life
thanks to the use of high quality steel with a high carbon content (VG10, CoS, Shiro) or sintered (SPG2), in the heart of the sheet (Core Steel), the blade once hardened, achieves hardness and cutting performance decidedly higher than those achieved with the use of traditional steels.

- Greater resilience
built with the principle of Japanese swords, multilayer steel is difficult to break thanks to the toughness of the central steel (Core Steel) and the elasticity of the steel used for the lateral coating (Stainless Steel).

- Better corrosion resistance
the steel used for the external layers (Stainless Steel) guarantees the blade a high resistance to corrosion. The combination of the two or more materials used by Takefu Steel generates, at the galvanic level, a structure that improves the corrosion resistance also on the wire.

- Easy processing even after heat treatment
although normally the steel becomes harder after hardening, the lateral steel used in multi-layer processing does not lose its softness and allows easy processing, drilling or welding even after heat treatment. For optimum performance of the blade, cryogenic treatment is recommended.

- Improvement of the aesthetic result
The knives made with multistate steel or with a damask pattern at the end of the processing are aesthetically elegant, refined and highly appreciated by collectors all over the world.

For more information: collinisteel

Limited and exclusive edition for the civilian market of the Hurricane Folder model made in only 10 numbered pieces and with the Logo of the amphibious fight instructors of the Lagunari (to whom it was supplied directly by the Wander Tactical). The model also features a partially serrated blade and DLC surface treatment.

Intended use: Heavy Duty / Hiking / Tactical / Collection

Type of production: industrial
Country of production: Italy
Blade: D2 steel at 59 / 61HRC with cryogenic hardening
Blade treatment: DLC Black
Handle: titanium briefcases with aluminum handle
Blade length: 90mm.
Blade thickness: 5mm.
Length closed: 120mm.
Total length: 210mm.
Thick when closed: 13.6mm.
Balancing: -
Weight: 160g.
Opening: Carson Flipper system / ambidextrous opening pins on the blade
Washers: in steel, with ball bearings made in Japan
Closing time: Rockers Arm 8.11
Clip: titanium, removable and reversible
Sheath: -
Packaging: Plastic packaging with Wander Tactical and Lagunari logos
Notes: Limited Edition with logo of the amphibious fight instructors of the Lagunari and number III generation production 2019

Citadel - Nordic

These handmade knives are distinguished by their original but functional line, which is well matched to the traditional manufacturing techniques and the materials used.
The blades are in fact carbon-hardened to a hardness of around 40 HRC after which, after being hammered by hand, the back and sides are covered with clay and the wire tempered at 60 HRC to have excellent cutting capacity, penetration and flexibility. The knife is then polished and sharpened by hand on stone and finished in every single detail.

Blade: DNH7 "Bruit de forge" selective hardening 40/60 HRC steel with file-worked spine
handle: In wood with brass guard
Blade length: 70 mm.
Handle length: 115 mm.
Blade thickness: 3.5 mm.
Total length: 195 mm.
Sheath: Handmade brown leather
Weight: 154 g.

Intended use: Heavy Duty / Hiking / Tactical / Collection

Type of production: industrial
Country of production: Italy
Blade: in D2 steel at 59 / 61HRC with cryogenic tempering
Blade treatment: Black
Handle: titanium folders with aluminum handle
Blade length: 90mm.
Blade thickness: 5mm.
Closed length: 120mm.
Total length: 210mm.
Thick when closed: 13.6mm.
Balancing: -
Weight: 160g.
Opening: Carson Flipper system / ambidextrous opening pins on the blade
Washers: in steel, with ball bearings made in Japan
Closing: Rockers Arm 8.11
Clip: titanium, removable and reversible
Sheath: -
Packaging: Plastic case with Wander Tactical logos
Notes: 3rd generation 2019 production

Intended use: Heavy Duty / Hiking / Tactical / Collection

Type of production: industrial
Country of production: Italy
Blade: in D2 steel at 59 / 61HRC with cryogenic tempering
Blade treatment: Stonwash
Handle: titanium folders with aluminum handle
Blade length: 90mm.
Blade thickness: 5mm.
Closed length: 120mm.
Total length: 210mm.
Thick when closed: 13.6mm.
Balancing: -
Weight: 160g.
Opening: Carson Flipper system / ambidextrous opening pins on the blade
Washers: in steel, with ball bearings made in Japan
Closing: Rockers Arm 8.11
Clip: titanium, removable and reversible
Sheath: -
Packaging: Plastic case with Wander Tactical logos
Notes: 3rd generation 2019 production

Intended use: Heavy Duty / Hiking / Tactical / Collection

Type of production: industrial
Country of production: Italy
Blade: in D2 steel at 59 / 61HRC with cryogenic tempering
Blade treatment: Stonwash
Handle: titanium folders with aluminum handle
Blade length: 90mm.
Blade thickness: 5mm.
Closed length: 120mm.
Total length: 210mm.
Thick when closed: 13.6mm.
Balancing: -
Weight: 160g.
Opening: Carson Flipper system / ambidextrous opening pins on the blade
Washers: in steel, with ball bearings made in Japan
Closing: Rockers Arm 8.11
Clip: titanium, removable and reversible
Sheath: -
Packaging: Plastic case with Wander Tactical logos
Notes: 3rd generation 2019 production

Custom version of the standard Hurricane model - blade, folders, clips and screws modified by hand by the Wander Tactical knife designer Dino Picco

Type of production: semi-industrial
Lama production: Italy
Blade: in steel D2 at 59 / 60HRC
Lama treatment: Black Blood
Handle: Aluminum available in alluminium
Blade length: 90mm.
Blade thickness: 5mm.
Total length: 215mm.
Balancing: set back
Weight: 238g.
Package: -
Notes: clip, blade lock Rockers Arm 8.11 - safety pin

Single piece custom version of the standard Hurricane model - blade, folders, clips and screws modified by hand by the Wander Tactical knife designer Dino Picco - The finish of the "Bronze" blade is obtained through a natural oxidation process that takes place at the end of the hardening phase cryogenic.

Type of production: semi-industrial
Lama production: Italy
Blade: in steel D2 at 59 / 60HRC
Lama treatment: Bronze flow
Manicure: Aluminum (alluminium)
Blade length: 90mm.
Blade thickness: 5mm.
Total length: 215mm.
Balancing: set back
Weight: 187g.
Package: -
Notes: clip, blade lock Rockers Arm 8.11 - safety pin

Intended use: Heavy Duty / Hiking / Tactical / Collection

Type of production: artisan blade and handle - industrial folders
Country of production: Italy
Blade: in D2 steel at 59 / 61HRC with cryogenic tempering
Blade treatment: Raw
Handle: titanium folders with micarta handle
Blade length: 90mm.
Blade thickness: 5mm.
Closed length: 120mm.
Total length: 214mm.
Thick when closed: -mm.
Balancing: -
Weight: 182g.
Opening: Carson Flipper system / ambidextrous opening pins on the blade
Washers: in steel, with ball bearings made in Japan
Closing: Rockers Arm 8.11
Clip: stainless steel, removable and reversible
Sheath: -
Packaging: Plastic case with Wander Tactical logos
Notes: Custom Edition unique piece

Article on reservation - available from December 15, 2017
 
Intended use: heavy duty / hiking / tactical / collection
Type of production: hand-made blade and handle - industrial titanium folders
Country of production: Italy
Blade: D2 steel at 59 / 61HRC with cryogenic hardening
Blade Treatment: Raw
Handle: titanium folding handles with micarta handle
Blade Length: 90mm.
Blade thickness: 5mm.
Closed length: 120mm.
Total length: 210mm.
Weight: 150g.
Opening: Carson Flipper system / bobbin opening pins on the blade
Washers: Steel, with ball bearings made in Japan
Closure: Rockers Arm 8.11
Clip: Stainless steel removable and reversible
Packing: Plastic case with Wander Tactical logos

Article on reservation - available from December 15, 2017
 
Intended use: heavy duty / hiking / tactical / collection
Type of production: hand-made blade and handle - industrial titanium folders
Country of production: Italy
Blade: D2 steel at 59 / 61HRC with cryogenic hardening
Blade Treatment: Raw
Handle: titanium folding handles with micarta handle
Blade Length: 90mm.
Blade thickness: 5mm.
Closed length: 120mm.
Total length: 210mm.
Weight: 150g.
Opening: Carson Flipper system / bobbin opening pins on the blade
Washers: Steel, with ball bearings made in Japan
Closure: Rockers Arm 8.11
Clip: Stainless steel removable and reversible
Packing: Plastic case with Wander Tactical logos

Article on reservation - available from December 15, 2017
 
Intended use: heavy duty / hiking / tactical / collection
Type of production: hand-made blade and handle - industrial titanium folders
Country of production: Italy
Blade: D2 steel at 59 / 61HRC with cryogenic hardening
Blade Treatment: Raw
Handle: titanium folding handles with micarta handle
Blade Length: 109mm.
Blade thickness: 5mm.
Closed length: 145mm.
Total length: 250mm.
Weight: 150g.
Opening: Carson Flipper system / bobbin opening pins on the blade
Washers: Steel, with ball bearings made in Japan
Closure: Rockers Arm 8.11
Clip: Stainless steel removable and reversible
Packing: Plastic case with Wander Tactical logos

Type of production: Artisan
Production Country: Italy
Blade: D2 steel at 59 / 60HRC
Blade Treatment: Black Blood
Manicure: Black Micarta
Head Size: 90mm (sharp) x 208mm
Thickness: 6.5mm.
Total Length: 370mm.
Balancing: advanced
Weight: 982g. (1.114g with sheath)
Sheath: in Kydex, thermoformed
Packing: -
Notes:

Use: EDC / Light Utility / All Round

Type of production: Artisan
Country of production: Italy
Blade: integral, D2 steel to 59 / 61HRC
Blade Treatment: Black Blood
Manicure: paracord woodland
Blade Length: 90mm.
Blade thickness: 6.5mm.
Total length: 200mm.
Balance: backward
Weight: 220g.
Sheath: in Kydex, thermoformed, compatible with tek-lok attachments (not supplied) or usable as neck knife
Packing: -
Notes: Each knife is unique and handcrafted; There may be differences in finishes, colors and materials compared to the photographed product

Unique piece custom version of the standard Hurricane model - blade, folders, clips and hardware modified by hand by the Wander Tactical knife designer Dino Picco

Type of production: semi-industrial
Lama production: Italy
Blade: in steel D2 at 59 / 60HRC
Lama treatment: Black Blood
Manicure: Aluminum (alluminium)
Blade length: 90mm.
Blade thickness: 5mm.
Total length: 215mm.
Balancing: set back
Weight: 187g.
Package: -
Notes: clip, blade lock Rockers Arm 8.11 - safety pin

First folder presented by Wander Tactical

Type of production: semi-industrial
Country of production: Italy
Blade: D2 Steel 59 / 60HRC
Blade treatment: Black MIL-C 13924
Handle: aluminum
Blade length: 90mm.
Blade thickness: 5mm.
Overall length: 215mm.
Balancing: backward
Weight: 187g.
Sheath: -
Packaging: -
Notes: clip - blade lock Arm Rockers 8:11 - safety pin

First folder presented by Wander Tactical

Type of production: semi-industrial
Production Lama: Italy
Blade: D2 Steel 59 / 60HRC
Blade treatment: Black MIL-C 13924
Handle: aluminum available in three colors (black, green, alluminium)
Blade length: 90mm.
Blade thickness: 5mm.
Overall length: 215mm.
Balancing: backward
Weight: 187g.
Sheath: -
Packaging: -
Notes: clip - blade lock Arm Rockers 8:11 - safety pin

First folder presented by Wander Tactical

Type of production: semi-industrial
Country of production: Italy
Blade: D2 Steel 59 / 60HRC
Blade treatment: Black MIL-C 13924
Handle: aluminum
Blade length: 90mm.
Blade thickness: 5mm.
Overall length: 215mm.
Balancing: backward
Weight: 187g.
Sheath: -
Packaging: -
Notes: clip - blade lock Arm Rockers 8:11 - safety pin