Knives, collection knife, tactical knives, outdoor knives, pocket knives and tools
-
Zero Tolerance - ZT0006BLK - Limited Edition Sprint Run - CPM-3V & Black G10 - knife
Intended Use: Tactical / Sporting
Production type: Industrial
Country of Production: USA
Blade: full tang in carbon steel CPM-3V
Blade treatment: Black Cerakote
Handle: G10 Black with stainless steel through-guard
Blade length: 152mm.
Blade thickness: 4.8mm.
Total length: 272mm.
Handle thickness: 17.8mm.
Weight: 292g.
Sheath: kydex, with Nylon belt attachment system, removable
Packaging: cardboard box with Zero Tolerance logos
Notes: limited edition Sprint Run edition (not numbered) designed for the international market onlyZT0006BLK -
Zero Tolerance - SpeedSafe Flipper - BlackWash - ZT0357BW - knife
Intended use: Sports
Type of production: Industrial
Country of production: USA
Blade: CPM-20CV 60 / 62HRC stainless steel
Blade finish: BlackWash
Handle: G-10
Blade length: 82.5mm.
Blade thickness: 3.1mm.
Length closed: 112mm.
Total length: 194mm.
Thick when closed: 11.2mm.
Weight: 122g.
Closing: Liner Lock
Clip: Removable and reversible in stainless steel
Packaging: cardboard box with Zero Tolerance logos
Notes: SpeedSafe quick opening via Carson Flipper systemZT0357BW -
Chris Reeve - Sable III Integral Knife - PRIVATE COLLECTION - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Like new, never used
* Commercially available Discontinued
* Sharpening: Factory
* Marks on blade: No
* Marks on handle: No
* Box: Absent
* Scabbard: Present, original, like new
* Manuals, Certificates and Warranties: No
* Checked and Certified by our in-house laboratoryIntended Use: Collecting/Hunting/Sporting
Production type: Midtech
Country of Production: USA
Blade: A2 55/57HRC steel
Blade Treatment: gunkote
Handle: A2 55/57HRC steel with alluminium screwed cap
Blade length: 108mm.
Blade thickness: 4mm.
Total length: 205mm.
Weight: 203g.
Sheath: Black leather
Packaging: -
Notes: knife withdrawn from private collection like new, lacks packaging and certificatesCR-SA3-CP -
Zero Tolerance - Sinkevich - S35VN Red Blackwash - Factory Special Series - ZT0452RDBW - knife
Intended Use: Tactical/Military
Production type: Industrial
Country of Production: USA
Blade: Stainless steel CPM-S35VN
Blade treatment: Blackwash
Handle: Titanium Blackwash and Carbon Fiber Red and Black
Blade Length: 104mm.
Blade thickness: 4mm.
Length closed: 131mm.
Total length: 235mm.
Thickness when closed: 13mm.
Weight: 125g.
Closure: Frame Lock
Clip: stainless steel, removable and multi-position
Packaging: cardboard box with Zero Tolerance logos
Notes: Design by Dmitry Sinkevich - KVT opening on ball bearings - Opening via Carson Flipper system - Limited Edition "Factory Special Series"ZT0452RDBW -
Zero Tolerance - Sinkevich - 20CV Red Blackwash - Factory Special Series - ZT0460RDBW - knife
Intended Use: Sporting/Tactical
Production type: Industrial
Country of Production: USA
Blade: Stainless steel CPM-20CV
Blade treatment: Blackwash
Handle: Carbon fiber and Titanium Blackwash
Blade length: 83mm.
Blade thickness: 3mm.
Length closed: 112mm.
Total length: 191mm.
Weight: 65g.
Closure: Framelock
Clip: Removable, stainless steel
Notes: KVT opening on ball bearings - Carson Flipper opening system - Design by Sinkevich - Limited Edition "Factory Special Series"ZT0460RDBW -
Zero Tolerance - ZT0223 - Tim Galyean - Military Flipper - knife
Intended use: Tactical / Sports / Collection
Type of production: Industrial
Country of production: USA
Blade: CPM-20CV stainless steel
Blade treatment: Black DLC
Handle: Titanium Black DLC and G10
Blade length: 89mm.
Blade thickness: 4mm.
Length closed: 128mm.
Total length: 218mm.
Thick when closed: 14mm
Weight: 134g.
Closure: Framelock
Clip: Removable, reversible, in stainless steel
Packaging: cardboard box with Zero Tolerance logos
Notes: Design by Tim Galyean - KVT opening on ball bearings - Carson Flipper opening systemZT0223 -
Zero Tolerance - ZT0055BLK - Gus T. Cecchini - Black DLC - Limited Edition Sprint Run - knife
Intended use: Sports / Collection
Type of production: Industrial
Country of production: USA
Blade: CPM-20CV stainless steel
Blade treatment: Black DLC
Handle: Black DLC Titanium
Blade length: 95mm.
Blade thickness: 4mm.
Length closed: 127mm.
Total length: 222mm.
Thick when closed: 14mm
Weight: 141g.
Closure: Framelock
Clip: Removable, reversible, in titanium
Packaging: cardboard box with Zero Tolerance logos
Notes: "Sprint Run" Limited Edition available while stocks last - Design by Gustavo T. Cecchini by GTC Knives - KVT opening on ball bearings - SLT Spring Loaded Tab opening systemZT0055BLK -
Zero Tolerance - Hinderer Slicer Frame Lock Tiger Stripe - Black Sprint Run - ZT0562TS - knife
Intended use: Tactical / Military
Type of production: Industrial
Lama production: USA
Blade: CPM-20CV stainless steel
Blade treatment: Black DLC
Handle: Titanium with Black DLC and G-10 treatment
Blade length: 90mm.
Blade thickness: 4mm.
Length closed: 113mm.
Total length: 206mm.
Thick when closed: 12mm.
Weight: 160g.
Closure: Frame Lock
Clip: Removable, Multiposition, made of stainless steel
Packaging: cardboard box with Zero Tolerance logos
Notes: Design by Rick Hinderer - Ball bearing opening KVT Ball Bearing System - Opening by Carson Flipper systemZT0562TS -
Zero Tolerance - ZT0055BRZ - Bronze Titanium - Sprint Run - knife
Intended use: Sports / Collection
Type of production: Industrial
Country of production: USA
Blade: CPM-20CV stainless steel
Blade treatment: blackwash
Handle: Titanium
Blade length: 95mm.
Blade thickness: 4mm.
Length closed: 127mm.
Total length: 222mm.
Thickness when closed: -
Weight: 141g.
Closure: Framelock
Clip: Removable, reversible, in titanium
Packaging: cardboard box with Zero Tolerance logos
Notes: Sprint Run Edition available while stocks last - Design by Gustavo T. GTC Knives Coppers - KVT opening on ball bearings - SLT opening system Spring Loaded TabZT0055BRZ -
Zero Tolerance - Sinkevich Flipper Blackwash White Carbon Fiber - Sprint Run - ZT0452WBW - knife
Intended use: Tactical / Military
Type of production: Industrial
Country of production: USA
Blade: CPM-S35VN stainless steel
Blade treatment: Blackwash
Handle: Blackwash Titanium and White and Black Carbon Fiber
Blade length: 104mm.
Blade thickness: 4mm.
Length closed: 131mm.
Total length: 235mm.
Thick when closed: 13mm.
Weight: 132g.
Closure: FrameLock
Clip: stainless steel, removable and multiposition
Packaging: cardboard box with Zero Tolerance logos
Notes: Design by Dmitry Sinkevich - KVT opening on ball bearings - Opening by Carson Flipper system - Limited edition of Sprint RunZT0452WBW -
Zero Tolerance - Rexford Folder Black Titanium DLC Sprint Run - ZT0808BLK - knife
Intended use: Sports / Collection
Type of production: Industrial
Country of production: USA
Blade: Stainless steel CPM-S35VN 59 / 61HRC
Blade treatment: Black DLC
Handle: Titanium with DLC treatment
Blade length: 80mm.
Blade thickness: 4mm.
Length closed: 111mm.
Total length: 190mm.
Weight: 126g.
Closing: FrameLock with stainless steel knocker
Clip: stainless steel, removable and multiposition
Packaging: cardboard box with Zero Tolerance logos
Notes: Design by Todd Rexford - KVT opening on ball bearings - Limited edition Sprint RunZT0808BLK -
Chris Reeve - Green Beret 7" knife by W. Harsey - 2017 Version - knife
Purpose: Collection / Fighter
Type of production: semi-industrial
Country of production: Boise - Idaho - USA
Blade: Stainless steel CPM-S35VN at 55 / 57HRC
Surface treatment: Black PVD
Handle: Black Canvas Micarta
Blade Length: 180mm.
Blade thickness: 5.58mm.
Total Length: 315mm.
Balance: on the lower guard branch
Weight: 363g.
Sheath: Nylon thongs, compatible M.O.L.L.E.
Notes: New Version 2017 - Warranty and Authenticity Certificates - Design by William W. HarseyGB7-1000 -
Zero Tolerance - Rick Hinderer - Blue Titanium Flipper - ZT0393 - knife
Intended use: Sports / Collection
Type of production: Industrial
Country of production: USA
Blade: CPM-20CV stainless steel
Blade treatment: Dual Tone: satin finishing and Black DLC
Handle: Titanium anodized and G10
Blade length: 89mm.
Blade thickness: 4mm.
Length closed: 119mm.
Total length: 209mm.
Thick when closed: 14mm.
Weight: 142g.
Closure: Frame Lock
Clip: stainless steel with Black DLC treatment, removable and reversible
Packaging: cardboard box with Zero Tolerance logos
Notes: Design by Rick Hinderer - KVT opening system on ball bearings with engagement by Carson Flipper systemZT0393 -
Zero Tolerance - Flipper Folder Gray Sprint Run - 0770GRYBW - knife
Intended use: Tactical / Military
Type of production: Industrial
Lama production: USA
Blade: CPM-S35VN 59 / 61HRC stainless steel
Lama treatment: Black
Handle: Aluminum Gray
Blade length: 83mm.
Blade thickness: 3mm.
Length closed: 108mm.
Total length: 190mm.
Thick when closed: 13mm.
Balancing: -
Weight: 110g.
Closure: Liner Lock
Clip: Removable and multiposition, in stainless steel
Packaging: cardboard box with Zero Tolerance logos
Notes: SpeedSafe opening systemZT0770GRYBW -
Zero Tolerance - Flipper Folder Sprint Run - ZT0770DBLK - knife
Intended use: Tactical / Military
Type of production: Industrial
Lama production: USA
Blade: CPM-S35VN 59 / 61HRC stainless steel
Lama treatment: Black
Handle: Aluminum Green
Blade length: 83mm.
Blade thickness: 3mm.
Length closed: 108mm.
Total length: 190mm.
Thick when closed: 13mm.
Balancing: -
Weight: 110g.
Closure: Liner Lock
Clip: Removable and multiposition, in stainless steel
Packaging: cardboard box with Zero Tolerance logos
Notes: SpeedSafe opening systemZT0770DBLK -
Zero Tolerance - Hinderer Slicer Frame Lock - Black Sprint Run - ZT0562BLK - knife
Intended Use: Tactical/Military
Production Type: Industrial
Blade Manufacturing: USA
Blade: Stainless steel CPM-20CV
Blade Treatment: Black DLC
Handle: Titanium with Black DLC and G-10 treatment
Blade Length: 90mm.
Blade thickness: 4mm.
Length closed: 113mm.
Total length: 206mm.
Thickness when closed: 12mm.
Weight: 160g.
Closure: Frame Lock
Clip: Removable, Multiposition, Stainless Steel
Packaging: Cardboard box with Zero Tolerance logos
Notes: Design by Rick Hinderer - Opening on KVT Ball Bearing System - Opening by Carson Flipper SystemZT0562BLK -
Chris Reeve - Professional Soldier by W. Harsey - Tanto - 2017 Version - knife
Use target: Neck Knife / Sportsman / Tactical
Type of production: semi-industrial
Country of production: Boise - Idaho - USA
Blade: Stainless steel CPM-S35VN 55 / 57HRC
Surface treatment: PVD
Handle: Stainless steel CPM-S35VN 58 / 59HRC
Blade Length: 86mm.
Blade thickness: 4.2mm.
Total length: 184mm.
Weight: 85g.
Sheath: in Kydex, ultra-thin
Packing: white cardboard box with Chris Reeve logos, Warranty Certificates
Notes: Design by William W. HarseyPRO-1002 -
Chris Reeve - Professional Soldier by W. Harsey - Insingo - 2017 Version - knife
Use target: Neck Knife / Sportsman / Tactical
Type of production: semi-industrial
Country of production: Boise - Idaho - USA
Blade: Stainless steel CPM-S35VN 55 / 57HRC
Surface treatment: PVD
Handle: Stainless steel CPM-S35VN 58 / 59HRC
Blade Length: 86mm.
Blade thickness: 4.2mm.
Total length: 184mm.
Weight: 85g.
Sheath: in Kydex, ultra-thin
Packing: white cardboard box with Chris Reeve logos, Warranty Certificates
Notes: Design by William W. HarseyPRO-1001 -
Chris Reeve - Professional Soldier by W. Harsey - Drop - 2017 Version
Use target: Neck Knife / Sportsman / Tactical
Type of production: semi-industrial
Country of production: Boise - Idaho - USA
Blade: Stainless steel CPM-S35VN 55 / 57HRC
Surface treatment: PVD
Handle: Stainless steel CPM-S35VN 58 / 59HRC
Blade Length: 86mm.
Blade thickness: 4.2mm.
Total length: 184mm.
Weight: 85g.
Sheath: in Kydex, ultra-thin
Packing: white cardboard box with Chris Reeve logos, Warranty Certificates
Notes: Design by William W. HarseyPRO-1000 -
Chris Reeve - Pacific Plain by W. Harsey - 2017 Version - knife
Purpose of use: Collection / Utility
Type of production: semi-industrial
Country of production: Boise - Idaho - USA
Blade: Stainless steel CPM-S35VN at 55 / 57HRC
Surface treatment: PVD
Handle: Black Canvas Micarta
Blade Length: 150mm.
Blade thickness: 5.58mm.
Total length: 292mm.
Balance: on the lower guard branch
Weight: 329g.
Sheath: Nylon thongs, compatible M.O.L.L.E.
Notes: New Version 2017 - Warranty and Authenticity Certificates - Design by William W. HarseyPAC-1000 -
Chris Reeve - Pacific by W. Harsey - 2017 Version - knife
Purpose of use: Collection / Utility
Type of production: semi-industrial
Country of production: Boise - Idaho - USA
Blade: Stainless steel CPM-S35VN at 55 / 57HRC
Surface treatment: PVD
Handle: Black Canvas Micarta
Blade Length: 150mm.
Blade thickness: 5.58mm.
Total length: 292mm.
Balance: on the lower guard branch
Weight: 329g.
Sheath: Nylon thongs, compatible M.O.L.L.E.
Notes: New Version 2017 - Warranty and Authenticity Certificates - Design by William W. HarseyPAC-1001 -
Chris Reeve - Green Beret 7" by W. Harsey - 2017 Version - knife
Purpose: Collection / Fighter
Type of production: semi-industrial
Country of production: Boise - Idaho - USA
Blade: Stainless steel CPM-S35VN at 55 / 57HRC
Surface treatment: Black PVD
Handle: Black Canvas Micarta
Blade Length: 180mm.
Blade thickness: 5.58mm.
Total Length: 315mm.
Balance: on the lower guard branch
Weight: 363g.
Sheath: Nylon thongs, compatible M.O.L.L.E.
Notes: New Version 2017 - Warranty and Authenticity Certificates - Design by William W. HarseyGB7-1001 -
Zero Tolerance - Blackwash Sinkevich Titanium Flipper - ZT0456BW - Knife
Purpose: Sportsman / Collectibles
Type of production: Industrial
Blade Production: U.S.A.
Blade: Stainless steel CPM 20CV
Blade Treatment: Blackwash
Manicure: Titanium with anodized spacers
Blade Length: 87mm.
Blade thickness: 4mm.
Closed length: 112mm.
Overall length: 193mm.
Closed thickness: 14mm.
Weight: 176g.
Closure: Framelock
Clip: Removable, reversible, stainless steel
Packing: cardboard box with Zero Tolerance logos
Notes: Design by Dmirty Sinkevich - KVT opening on ball bearingsZT0456BW -
Zero Tolerance - Hinderer Slicer Frame Lock - Orange Sprint Run - ZT0562ORBLK - knife
Intended use: Tactical / Military
Type of production: Industrial
Production Lama USA
Blade: Stainless steel CTS-204P
Blade treatment: Black DLC
Handle: Titanium with Black DLC and G-10 Orange
Blade length: 90mm.
Blade thickness: 4mm.
Closed Length: 113mm.
Overall length: 206mm.
Thick when closed: 12mm.
Weight: 160g.
Lock: Frame Lock
Clip: Removable, Multi position, stainless steel
Packaging: cardboard box with Zero Tolerance logos
Notes: Design by Rick Hinderer - Opening of ball bearings Ball Bearing System KVT - opening via Carson Flipper systemZT0562ORBLK -
Chris Reeve - Mk IV 28 Year Commemorative knife
Chris Reeve - Mk IV 28 Year Commemorative knife
For 28 years, (the A2 round handled) One Piece Range of knives has been an essential part of Chris Reeve Knives. From Chris first designing the concept while serving in the South African Army in Namibia to today, these knives have been used, carried, admired and collected in all corners of the world.
An integral part of the success of this range has been Eddie Myers. Eddie was Chris's foreman when Chris was an apprentice tool and die maker. They have known each other more years than they care to count and Chris has always regarded Eddie as mentor, teacher, friend and consultant! For 25 years, Eddie has machined the blanks for our One Piece Knives. Still living in South Africa, Eddie and his wife Caroline, have provided fine service to deliver the best blanks at the best price. (There is no question that the volatility of the South African currency has helped over the years!)
Eddie and Caroline want to retire. Ed wants to buy a boat again and go fishing whenever he feels like it! This brought us to a cross-roads--do we try to source a vendor in the USA or should we simply retire a - Classic. We have decided to take the second choice--to discontinue the One Piece Range.
To celebrate the end of this era, Chris Reeve Knives offered a limited edition of 250 Commemorative Mk IVs. The Mk IV was the first iteration of the one piece concept to become known there is still call for this model which we initially discontinued in 1995. It has a 7 inch blade with a clip point and sawback. For this commemorative edition, the butt cap is engraved and polished and the sheath has a commemorative logo embossed.
Specifications
Blade Material: A2 tool steel
Blade Hardness: 55-57 RC
Blade Coating: KG Gun-Kote
Blade Length: 7" sawback blade
Blade Thickness: 0.187"
Overall Length: 12"
Handle Material: A2 Tool Steel
But Cap Material: D65S aluminum
Sheath: Leather with horizontal carry belt loop, Snap
Weight: 12.90 oz. (365 grams)
Limited Edition, only 250 pieces produced!
Handmade in the USA
One Piece Knife ConceptThe idea of the one piece knife was born while Chris was serving time in the South African Army on the Namibia/Angola border in 1979. The experiences of military service have contributed substantially to the features in these knives.
Chris realized that the ideal working knife was a tool which was strong, reliable and impervious to temperature and humidity. Extensive time has been devoted to design, and research and development to improve both the blade designs and the methods used in making the knives.
Each knife is made from a solid billet of A2 tool steel. The stock removal method results in two distinct advantages--the strength/weight ratio is exceptional and there is no handle/blade join. This means that there is no area where the blade and handle could come apart--a weakness in the design of other hollow handle knives. The handle cavity is larger than that of any similar knife. The hollow handle is closed with a butt cap made of 6061 aluminum which screws into the handle against a Neoprene "O" ring, ensuring the cavity is sealed from dust and moisture. All the one piece knives are hardened to 55-57 RC and random checks are made to ensure accuracy. This hardness gives superb toughness, good edge retention and allows for efficient sharpening in the field. Each knife is coated with super hi-tech KG Gun-Koteä originally developed for use in the aerospace industry. This coating offers a durable, long-lasting, non-reflective covering. Included in the price of each knife is a hand-made leather sheath. A lifelong guarantee, signed by Chris accompanies each knife.
The one piece design offers the highest possible weight/strength ratio
A2 Tool Steel offers excellent edge retention and good shock resistance
Hardness at between 55 and 57 Rockwell C is not brittle but gives good edge retention along with ease of sharpening
An 8" hollow grind is used with a full thickness back edge. All designs are ground to allow the full thickness of the back edge to come as close to the point as possible, affording a very strong front tip but not restricting the knife's ability to pierce
The hollow handle, which is created to reduce weight, is larger than any similar sized knife because there is no join between handle and blade
The aluminum butt cap provides an airtight closure for the hollow handle and is designed so that it can be used for hammering. Because using the knife as a hammer can be dangerous to one's knuckles and fingers, we do not recommend that this be done unless in an emergency situation. It is preferable to use a hammer
Full depth precision machined knurling affords maximum non-slip grip
Non-reflective KG Gun-Koteä coating gives lasting protection
All knives carry a lifetime guarantee and a damaged knife will be replaced or repaired at Chris' discretion. This guarantee does not cover damage to a knife that has been thrown or used for heavy levering
These knives are used by hunters, backpackers, SWAT teams, military personnel, firefighters and police all over the world. They are also to be found in many knife collections and most of our customers own more than one of our knives
Each hand made leather sheath is designed to fit the knife well, to give maximum protection to the carrier and the knife when being carried. Because we continue to improve our design, sheaths supplied might not be exactly as shown in the brochure
Replacement butt caps and sheaths are available at reasonable prices
Many customers feel that once their knives have been used, they lose collector's value. This is not so as the knife can be returned to Chris Reeve Knives, where it will be sandblasted, re-coated with KG Gun-Kotea, sharpened and returned to it's original condition. Contact Chris Reeve Knives for cost. Please return knife in sheathCR-MkIV -
Zero Tolerance - Rexford Flipper Carbon Fiber - ZT0804CF - knife
Intended use: Tactical / Sports / Collection
Type of production: Industrial
Country of Origin: USA
Blade: Stainless steel CTS-204P 60 / 61HRC
Blade treatment: DLC
Handle: Carbon fiber and titanium
Blade length: 98mm.
Blade thickness: 4mm.
Closed Length: 124mm.
Overall length: 225mm.
Weight: 145g.
Lock: Frame Lock
Clip: Removable, reversible, stainless steel
Packaging: cardboard box with Zero Tolerance logos
Notes: Design by Todd Rexford - Opening KVT on ball bearingsZT0804CF -
Zero Tolerance - Sinkevich Carbon Fiber - ZT0450CF - knife
Intended use: EDC / Sports / Collection
Type of production: Industrial
Country of Origin: USA
Blade: Stainless steel CPMS35 59 / 61HRC
Blade treatment: DLC
Handle: Carbon fiber and titanium
Blade length: 82mm.
Blade thickness: 3mm.
Closed Length: 111mm.
Overall length: 187mm.
Weight: 68g.
Lock: Frame Lock
Clip: Removable, multi-position, stainless steel
Packaging: cardboard box with Zero Tolerance logos
Notes: Design by Dmitry Sinkevich - Opening KVT on ball bearingsZT0450CF -
Chris Reeve - Ubejane Skinner - coltello
Raro coltello fuori serie realizzato nel 2009 da Chris Reeve.
Il nome Ubejane significa Rinoceronte nella lingua Zulu in South Africa.
Destinazione d'uso: Collezione/Caccia/Sportivo
Tipo di produzione: Semi-Artigianale
Produzione Lama: USA
Lama: In acciaio A2 55/57HRC
Trattamento Lama: black
Manicatura: Brown canvas Micarta
Lunghezza lama: 100mm.
Spessore lama: 5mm.
Lunghezza chiuso: -
Lunghezza totale: 230mm.
Spessore da chiuso: -
Bilanciatura: -
Peso: 312g.
Chiusura: -
Clip: -
Fodero: Cuoio nero
Confezione: Scatola di cartone bianca con loghi Chris Reeve; certificati di garanzia
Note: coltello fuori produzione dal 2011CR-SKINNER -
Zero Tolerance - Todd Rexford Flipper Folder Titanium Blackwash - ZT0801BW - knife
Intended use: Sport / Collection
Type of production: Industrial
Production Country: USA
Blade: Stainless steel Elmax 59 / 61HRC
Treatment blade: Blackwashwash
Handle: Titanium
Blade length: 89mm.
Blade thickness: 4mm.
Closed Length: 96mm.
Overall length: 119mm.
Thick when closed: 13mm.
Weight: 165g.
Closure: Frame Lock
Clip: Removable, multi-position, stainless steel
Packaging: cardboard box with logos Zero Tolerance
Notes: Design by Todd Rexford - Opening KVT ball-bearingZT801BW -
Zero Tolerance - Hinderer Folder Titanium Blackwash - ZT560BW - knife
Intended use: Tactical / Military
Type of production: Industrial
Production Country: USA
Blade: stainless steel Elmax 59 / 61HRC
Treatment blade: Blackwash
Handle: Titanium and G-10 finish 3D
Blade length: 98mm.
Blade thickness: 4mm.
Length closed: 127mm.
Overall length: 224mm.
Weight: 168g.
Closure: Frame Lock
Clip: Removable and multi-position, stainless steel
Packaging: cardboard box with logos Zero Tolerance
Notes: Design by Rick Hinderer - Opening KVT ball-bearing - Hinderer Lockback StabilizerZT560BW -
Zero Tolerance - Emerson Tanto - ZT0620 - knife
Intended use: Tactical / Military
Type of production: Industrial
Production Lama USA
Blade: stainless steel Elmax
Treatment Lama: Black DLC Coating
Handle: G-10 and titanium stonewashed
Blade length: 91mm.
Blade thickness: 3.6mm.
Length closed: 124mm.
Overall length: 216mm.
Thick when closed: 13mm.
Balancing: -
Weight: 182g.
Closure: Frame Lock
Clip: Removable and multi-position, stainless steel
Sheath: -
Packaging: cardboard box with logos Zero Tolerance
Note: in collaboration with Emerson Knives - opening system patented WaveZT0620 -
Zero Tolerance - Strider Onion Folder Blackwash G10 - ZT350BW - knife
Intended use: Tactical / Military
Type of production: Industrial
Production blade USA
Lama: In steel CPM-S30V
Blade treatment: Coating Blackwash
Handle: G-10 folder with stainless steel
Blade length: 90mm.
Blade thickness: 3mm.
Length closed: 115mm.
Overall length: 195mm.
Thick when closed: 13mm.
Balancing: -
Weight: 162g.
Lock: Liner Lock
Clip: Removable and multi-position, stainless steel
Sheath: -
Packaging: cardboard box with logos Zero Tolerance
Notes: Design by Mick Strider and Ken Onion - opening system SpeedsafeZT350BW -
Chris Reeve - Impofu 10" Limited Edition - knife
Collini Cutlery is the official distributor for Italy of tactical knives / collection made in the USA Chris Reeve
Made at the Blade Show in 2014 in a limited edition of only 500 pieces worldwide, the impofu (eland antelope, Lungu in Zulu) is a fixed blade knife largest and most impressive ever produced by Chris Reeve.
Use: Collection / Heavy Utility
Type of production: semi-homemade
Blade: Stainless Steel Tool CPM-3V 58 / 60HRC
Production Lama USA
Handle: Black Canvas Micarta
Blade length: 254mm.
Blade Thickness: 6.8mm.
Length closed: -
Overall length: 413mm.
Balancing: Advanced
Weight: 573g.
Closed: -
Sheath: Black Leather by Gfeller Casemakers
Notes: Production limited to 500 pieces worldwide - Certificate of Authenticity and warranty0038 -
Zero Tolerance - Hinderer 566 Frame Lock - Blackwash - ZT0566BW - knife
Use: Tactical / Military
Type of production: Industrial
Production Lama USA
Blade: CPM-S35VN Stainless steel
Treatment Blade: Bladewash Tungsten DLC Coating
Handle: Stainless Steel and Black G-10
Blade length: 82mm.
Blade thickness: 3mm.
Closed Length: 113mm.
Overall length: 196mm.
Thickness when folded: 12mm.
Balancing: -
Weight: 150g.
Lock: Frame Lock
Clip: Removable, Multi position, stainless steel
Sheath: -
Packaging: cardboard box with logos Zero Tolerance
Notes: Design by Rick Hinderer - Opening system SpeedsafeZT566BW -
Zero Tolerance - Strider Onion Black Washed - ZT300BW
Intended Use: Tactical / Military
Type of production: Industrial
Production Lama USA
Blade: steel CPM-S30V
Treatment Blade: Washed Tungsten DLC Coating
Handle: Titanium and G-10 Washed with 3D finish
Blade length: 95mm.
Blade thickness: 4mm.
Length closed: 133mm.
Total length: 218mm.
Thick when closed: 17mm.
Balance: -
Weight: 232g.
Closure: Frame Lock
Clip: Removable, Multi position, stainless steel
Sheath: -
Packaging: cardboard box with logos Zero Tolerance
Notes: Design by Mick Strider and Ken Onion - SpeedSafe opening system10121 -
Hollywood Collectibles Group - Rambo IV knife - Standard Edition - knife
Intended use: Survival / Collection
Blade: stainless steel
Lama Lama production
Handle: Dark brown leather
Blade length: 290mm.
Blade thickness: 7mm.
Length closed: -
Total length: 460mm.
Balancing: advanced to 4 cm.
Weight: 1.098g.
Closure: -
Clip: -
Sheath: in leather
Notes: Official reproduction with movie license6513N€0.00Only -99 leftOut of stock -
Master Cutlery - Green Hornet - Set Coltelli da Lancio di Kato - MC-GH01 - coltello
Direttamente dal remake cinematografico firmato da Michel Gondry, il set di coltelli da lancio utilizzato da Kato, il fido compagno di Green Hornet (il calabrone verde). Tre pezzi, da esporre su un elegante display laccato nero. Edizione ufficiale (su licenza Columbia Pictures), limitata a 2000 pezzi e numerata progressivamente.
Lama: Acciaio 420
Lunghezza totale: 152 mm.
Larghezza lama: 73 mm.
Spessore lama: 2.5 mm.
Peso: 52 g.
Bilanciatura: centrale
Note: -11029€73.77Out of stock -
Chris Reeve - Green Beret 5.5 "- knife
Chris Reeve - Green Beret 5.5 "- knife
Intended use: Collection / Allround / Fighter
Type of production: handmade
Blade: Stainless CPM-S30V 55/57HRC
Production Lama USA
Handle: Black Canvas Micarta
Blade length: 140mm.
Blade Thickness: 5.8mm.
Length closed: -
Total length: 275mm.
Balance: on the branch of lower guard
Weight: 320g.
Closing: -
Clip: -
Sheath: Nylon SpecOps
Note: Certificates of authenticity and warranty0013 -
Chris Reeve - Neil Roberts 6 "knife - knife
The Collini Cutlery is official distributor for Italy of the tactical knives / collection made in USA Chris Reeve
Intended use: Fighter / Tactical
Type of production: Artisan
Blade: stainless steel CPM-S35VN 55 / 57HRC
Lama production: USA
Handle: Black Canvas Micarta
Blade length: 170mm.
Blade thickness: 5.8mm.
Length closed: -
Total length: 290mm.
Balancing: set back to 1cm. from the lower guard branch
Weight: 356g.
Closure: -
Clip: -
Sheath: by SpecOps, in cordura
Notes: single-piece knife from 2007 - production ranksCR0014 -
Chris Reeve - Pacific by W. Harsey - black canvas micarta - knife
Winner of "American year knife" to Blade Show 2007.
The Pacific, born of the fruitful collaboration between Reeve and HARSEY is the civilian version of the model Green Beret created to celebrate the 50th Anniversary of "the 1st Special Forces Group" department that has operated in Asia and the Pacific; the name of the knife derives the operating environment of the department.
Intended use: Fighter / Utility Light
Type of production: semi-industrial
Blade: full tang CPM-S35VN Steel 55 / 57HRC with GunKote finish
Country of production: Idaho - USA
Handle: Black Canvas Micarta
Blade length: 150mm.
Blade Thickness: 5.8mm.
Overall length: 315mm.
Balance: on the lower part of the guard
Weight: 336g.
Sheath: Nylon, made in USA, with leg attacks and Type M.O.L.L.E.
Notes: Certificate of guarantee and authenticity0026 -
Chris Reeve - Professional Soldier - coltello
La Coltelleria Collini è distributore ufficiale per l’Italia dei coltelli tattici/collezione made in USA Chris Reeve
Destinazione d'uso: Sportivo / Tattico
Tipo di produzione: Semi-Artigianale
Produzione Lama: USA
Lama: In acciaio inox CPM-S35VN 55/57HRC
Trattamento Lama: KG Gun-Kote
Manicatura: In acciaio inox CPM-S35VN 55/57HRC
Lunghezza lama: 86mm.
Spessore lama: 4.1mm.
Lunghezza chiuso: -
Lunghezza totale: 184mm.
Spessore da chiuso: -
Bilanciatura: -
Peso: 85g.
Chiusura: -
Clip: -
Fodero: in Kydex by Blade Tech
Confezione: scatola in cartone bianco con loghi Chris Reeve, Certificati di garanzia
Note: Design by Bill Harsey0030 -
Master Cutlery - Rambo IV - John Rambo Limited Edition - knife
Destinazione d'uso: Survival/Collezione
Lama: in acciaio al carbonio 1060
Produzione Lama Cina
Manicatura: Cuoio nero
Lunghezza lama: 290mm.
Spessore della lama: 7mm.
Lunghezza chiuso: -
Lunghezza totale: 460mm.
Bilanciatura: avanzata a 4 cm.
Peso: 820g.
Chiusura: -
Clip: -
Fodero: in cuoio
Note: edizione a tiratura limitata con firma di "Sylvester Stallone" su lama e fodero.6513€0.00Only -99 leftOut of stock -
Zero Tolerance - Combat Black G10 - ZT170 knife
Zero Tolerance - Combat Black G10 - ZT170 knife
Intended Use: Tactical
Type of production: Industrial
Production Lama USA
Blade: stainless steel 14C28N
Treatment Blade: Tungsten DLC
Handle: Black G10 with 3D machining
Blade length: 160mm.
Blade thickness: 4mm.
Length closed: -
Total length: 294mm.
Thick when closed: -
Balance: -
Weight: 370g.
Closing: -
Clip: -
Sheath: Kydex
Packaging: Cardboard box with logos Zero Tolerance
Notes:4348 -
Zero Tolerance - G10 Shifter Black - ZT160 knife
Zero Tolerance - G10 Shifter Black - ZT160 knife
Intended Use: Tactical / Sports
Type of production: Industrial
Production Lama USA
Blade: stainless steel 14C28N
Treatment Blade: Tungsten DLC
Handle: Black G10 with 3D machining
Blade length: 127mm.
Blade thickness: 4mm.
Length closed: -
Total length: 254mm.
Thick when closed: -
Balance: -
Weight: 240g.
Closing: -
Clip: -
Sheath: Kydex
Packaging: Cardboard box with logos Zero Tolerance
Notes:4347 -
Zero Tolerance - Military Blade Matte Black - ZT100
Coltello fuori produzione - ultimo esemplare a nostra disposizione - articolo privo di scatola
Destinazione d'uso: Tattico
Tipo di produzione: Industriale
Produzione Lama: USA
Lama: full tang in acciaio CPM3V
Trattamento Lama: DLC al tungsteno
Manicatura: G-10 con lavorazione a 3D
Lunghezza lama: 150mm.
Spessore lama: 5mm.
Lunghezza chiuso: -
Lunghezza totale: 265mm.
Spessore da chiuso: -
Bilanciatura: arretrata ad 1.5cm
Peso: 320g.
Chiusura: -
Clip: -
Fodero: Nylon e Kydex
Confezione: scatola in cartone con loghi Zero Tolerance
Note: design by Ken Onion4308 -
Zero Tolerance - Military Folder Matte Black - ZT200
Destinazione d'uso: Tattico
Tipo di produzione: Industriale
Produzione Lama: USA
Lama: in acciaio 154CM
Trattamento Lama: DLC al tungsteno
Manicatura: G-10 con lavorazione a 3D e liners in acciaio inox
Lunghezza lama: 105mm.
Spessore lama: 3.5mm.
Lunghezza chiuso: 132mm.
Lunghezza totale: 223mm.
Spessore da chiuso: 23mm.
Bilanciatura: -
Peso: 224g.
Chiusura: Liner Lock
Clip: amovibile, multiposizione, in acciaio inox
Fodero: -
Confezione: scatola in cartone con loghi Zero Tolerance
Note: design by Ken Onion4312 -
Zero Tolerance - Military Folder Matte Black Combo - ZT200ST
Destinazione d'uso: Tattico
Tipo di produzione: Industriale
Produzione Lama: USA
Lama: in acciaio 154CM
Trattamento Lama: DLC al tungsteno
Manicatura: G-10 con lavorazione a 3D e liners in acciaio inox
Lunghezza lama: 105mm, di cui 25mm. del primo tratto con filo serrated
Spessore lama: 3.5mm.
Lunghezza chiuso: 132mm.
Lunghezza totale: 223mm.
Spessore da chiuso: 23mm.
Bilanciatura: -
Peso: 220g.
Chiusura: Liner Lock
Clip: amovibile, multiposizione, in acciaio inox
Fodero: -
Confezione: scatola in cartone con loghi Zero Tolerance
Note: design by Ken Onion4312S -
Zero Tolerance - Scavenger Matte Black - ZT400 coltello
Destinazione d'uso: Tattico/Militare
Tipo di produzione: Industriale
Produzione Lama: USA
Lama: In acciaio CPM-S30V
Trattamento Lama: Tungsten DLC Coating
Manicatura: Alluminio anodizzato nero con inserti Trac-Tec antiscivolo
Lunghezza lama: 925mm.
Spessore lama: 4mm.
Lunghezza chiuso: 126mm.
Lunghezza totale: 215mm.
Spessore da chiuso: 17mm.
Bilanciatura: -
Peso: 146g.
Chiusura: Liner Lock
Clip: Amovibile, Multiposizione, in acciaio inox
Fodero: -
Confezione: scatola in cartone con loghi Zero Tolerance
Note: Design by Ken Onion - Sistema di apertura SpeedSafe4342 -
Zero Tolerance - Shroud Cutter - JB2 - rescue
Il JB2 è realizzato in acciaio Sandvik 13C26 con copertura DLC al tungsteno.
La parte finale ha un foro con un angolo tagliente di 270° ed uno spessore di 2mm. specificatamente studiato per tagliare cinture di sicurezza e paracord garantendo la massima sicurezza.
Al termine dell'impugnatura trovano invece posto un pratico skull-crasher ed una chiave esagonale adatta ad aprire bombole di ossigeno.
Il tutto è corredato da un pratico fodero in Nylon adatto anche per aviolanci.4343 -
Zero Tolerance - Strider Fixed Blade Ranger Green - ZT121
Destinazione d'uso: Tattico
Tipo di produzione: Industriale
Produzione Lama: USA
Lama: full tang in acciaio CPM-S30V
Trattamento Lama: DLC al tungsteno
Manicatura: G-10 con lavorazione a 3D
Lunghezza lama: 105mm.
Spessore lama: 4.5mm.
Lunghezza chiuso: -
Lunghezza totale: 205mm.
Spessore da chiuso: -
Bilanciatura: arretrata ad 1.5cm
Peso: 264g.
Chiusura: -
Clip: -
Fodero: Kydex
Confezione: scatola in cartone con loghi Zero Tolerance
Note: design by Mick Strider4309 -
Zero Tolerance - Strider Onion Black - ZT300 coltello
Destinazione d'uso: Tattico/Militare
Tipo di produzione: Industriale
Produzione Lama: USA
Lama: In acciaio CPM-S30V
Trattamento Lama: Tungsten DLC Coating
Manicatura: Titanio e G-10 con finitura 3D
Lunghezza lama: 95mm.
Spessore lama: 4mm.
Lunghezza chiuso: 133mm.
Lunghezza totale: 218mm.
Spessore da chiuso: 17mm.
Bilanciatura: -
Peso: 232g.
Chiusura: Frame Lock
Clip: Amovibile, Multiposizione, in acciaio inox
Fodero: -
Confezione: scatola in cartone con loghi Zero Tolerance
Note: Design by Mick Strider and Ken Onion - Sistema di apertura SpeedSafe4341B -
Zero Tolerance - Strider Onion Folder Black G10 - ZT350 - knife
Zero Tolerance - Strider Onion Folder Black G10 - ZT350 - knife
Intended Use: Tactical / Military
Type of production: Industrial
Production Lama USA
Blade: steel CPM-S30V
Treatment Blade: Tungsten DLC Coating
Handle: G-10 with 3D finish
Blade length: 90mm.
Blade thickness: 3mm.
Length closed: 115mm.
Total length: 195mm.
Thick when closed: 13mm.
Balance: -
Weight: 162g.
Lock: Liner Lock
Clip: Removable, Multi position, stainless steel
Sheath: -
Packaging: cardboard box with logos Zero Tolerance
Notes: Design by Mick Strider and Ken Onion - SpeedSafe opening systemZT0350 -
Zero Tolerance - Strider Onion Folder Black G10 Serrated - ZT0350ST coltello
Destinazione d'uso: Tattico/Militare
Tipo di produzione: Industriale
Produzione Lama: USA
Lama: In acciaio CPM-S30V
Trattamento Lama: Tungsten DLC Coating
Manicatura: Titanio e G-10 con finitura 3D
Lunghezza lama: 90mm.
Spessore lama: 3mm.
Lunghezza chiuso: 115mm.
Lunghezza totale: 195mm.
Spessore da chiuso: 13mm.
Bilanciatura: -
Peso: 162g.
Chiusura: Liner Lock
Clip: Amovibile, Multiposizione, in acciaio inox
Fodero: -
Confezione: scatola in cartone con loghi Zero Tolerance
Note: Design by Mick Strider and Ken Onion - Sistema di apertura SpeedSafe4344S -
Chris Reeve - Green Beret 7 "- knife
Intended use: Collection / Allround / Fighter
Type of production: handmade
Blade: Stainless CPM-S35VN 55/57HRC
Production Lama USA
Handle: Black Canvas Micarta
Blade length: 180mm.
Blade Thickness: 5.8mm.
Length closed: -
Total length: 315mm.
Balance: on the branch of lower guard
Weight: 364g.
Closing: -
Clip: -
Sheath: Nylon SpecOps
Note: Certificates of authenticity and warranty0012