Knives, collection knife, tactical knives, outdoor knives, pocket knives and tools
-
Spyderco - Lil' Matriarch - Serrated Black FRN - PRIVATE COLLECTION - C162SBK - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased.
* Condition: Like new, packaging slightly damaged
* Commercially available: Discontinued
* Sharpening: Factory sharpened
* Marks on blade: None
* Marks on handle: None
* Box: Present
* Scabbard: /
* Manuals, Certificates and Warranties: Present
* Checked and Certified by our in-house laboratory
Intended Use: EDC / RescueProduction Type: Industrial
Country of Production: Japan
Blade: Stainless steel VG-10
Blade Treatment: Satin finish
Handle: FRN
Blade length: 75mm.
Blade thickness: 2mm.
Length closed: 107mm.
Total length: 180mm.
Weight: 70g.
Closure: Back Lock
Clip: stainless steel
Packaging: Cardboard box with Spyderco logos
Notes: -C126SBK-CP -
Spyderco - Salt I - H1FRN Yellow Knife - C88SYL - knife
A myth in the knife world is that out there somewhere there is a steel with high cutting capabilities that cannot rust.
A Japanese foundry recently turned this myth into reality with the introduction of a steel called H1. H1 is a PH steel, which is a precipitation-processed, hard-rolled alloy with no heat treatment and 0.1 percent nitrogen that acts like carbon in the steel matrix but does not react with chlorine to create rust.
Surprisingly, it maintains a sharp edge comparable to that of the higher quality knife steels used in the industry by most knife manufacturers.
Intended use: sub/sporting
Type of production: industrial
Country of manufacture: Japan
Blade: nitrogen steel H1
Blade finish: satin-finished
Handle: FRN
Blade length: 75mm.
Blade thickness: 3mm.
Length closed: 100mm.
Total length: 175mm.
Thickness when closed: 15mm.
Weight: 54g.
Closure: Back Lock
Clip: removable, stainless steel
Packaging: cardboard box with Spyderco logos
Notes: -SC88SYL -
Spyderco - Endura 4 Serrated Knife - K390 Blue FRN - C10FPK390 - knife
Intended Use: Sporting
Type of production: industrial
Blade: Bohler K390 carbon steel at 64/65HRC - SERRATED
Blade treatment: satin finish
Country of manufacture: Japan
Handle: FRN with embedded stainless steel liners
Blade length: 96mm.
Blade thickness: 3mm.
Length closed: 127mm.
Total length: 222mm.
Weight: 105g.
Closure: Back Lock
Clip: removable, multi-position, stainless steel
Packaging: cardboard case with Spyderco logos
Notes: variant in FRN Blue made from Bohler K390 carbon steelC10FSK390 -
Spyderco - Delica 4 SpyderEdge - C11SBK - knife
Intended use: Sporting
Type of manufacture: industrial
Blade: Stainless steel VG-10 58HRC
Blade treatment: -
Blade production: Japan
Handle: Black FRN with embedded stainless steel liners
Blade length: 75mm.
Blade thickness: 2.5mm.
Length closed: 107mm.
Total length: 180mm.
Balance: -
Weight: 72g.
Closure: Back Lock
Clip: Removable, multi-position, stainless steel
Sheath: -
Notes: -C11SBK -
Spyderco - Endura 4 Black FRN SpyderEdge - C10SBK - knife
Intended use: Sporting
Type of manufacture: industrial
Blade: VG-10 stainless steel
Blade treatment: -
Blade production: Japan
Handle: Black FRN with embedded stainless steel liners
Blade length: 95mm.
Blade thickness: 3mm.
Length closed: 125mm.
Total length: 220mm.
Balance: -
Weight: 104g.
Closure: Back Lock
Clip: Removable, multi-position, stainless steel
Sheath: -
Notes: -C10SBK -
Spyderco - Dragonfly - 2008 Integral FRN Clip - C28S - PRIVATE COLLECTION - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Overall in very good condition.
* Commercially available Discontinued since 2010.
* Sharpening: Factory.
* Marks on blade: slight marks near the handle, due to blade opening.
* Marks on handle: No.
* Box: Present and original
* Scabbard: not provided
* Manuals, Certificates and Warranties: no.
* Checked and Certified by our in-house laboratory
Intended Use: Sporting
Type of production: industrial
Blade: stainless steel VG-10 58HRC
Blade finish: satin finish
Country of manufacture: Japan
Handle: FRN (fiberglass reinforced nylon)
Blade length: 57mm.
Blade thickness: 2.5mm.
Length closed: 84mm.
Total length: 141mm.
Weight: 34g.
Closure: Back Lock
Clip: made of FRN, integrated into the handle
Notes: Third series made by Spyderco for the Dragonfly model, version remained in production only from 2008 to 2010 - specimen withdrawn from private collection, overall in very good conditionAP-C28S -
Spyderco - Dragonfly 2 - Black Serrated - C28SBK2 - knife
Intended use: Sports
Type of production: Industrial
Country of production: Japan
Blade: VG-10 stainless steel
Blade treatment: Satin finish
Handle: FRN - Fiberglass Reinforced Nylon
Blade length: 57mm.
Blade thickness: 2.5mm.
Length closed: 84mm.
Total length: 141mm.
Weight: 34g.
Closing: Back Lock
Clip: stainless steel, removable and reversible
Packaging: Cardboard box with Spyderco logos
Note: -C28SBK2 -
Spyderco - Matriarch 2 - C12SBK2 - knife
Spyderco - Matriarch 2 - C12SBK2 - knife
Intended Use: EDC / Sports / Collection
Type of production: Industrial
Production Lama: Japan
Blade: stainless steel VG-10
Treatment Lama: -
Handle: FRN Black
Blade length: 90mm.
Blade thickness: 2mm.
Closed Length: 125mm.
Overall length: 210mm.
Thick when closed: -
Balancing: -
Weight: 98g.
Closure: Back Lock
Clips: stainless steel
Sheath: -
Packaging: Cardboard box with logos Spyderco
Notes: -C12SBK2 -
Spyderco - Delica 4 Madreperla e Marmo Picasso by SantaFe Stoneworks - C11S
Destinazione d'uso: Collezione
Tipo di produzione: industriale (lama) ed artigianale (impugnatura)
Lama: in acciaio inox VG-10 58HRC
Trattamento Lama: -
Produzione Lama: Japan
Manicatura: interamente realizzata a mano da SantaFe Stoneworks, in Marmo Picasso e Madreperla
Lunghezza lama: 75mm.
Spessore della lama: 2.5mm.
Lunghezza chiuso: 107mm.
Lunghezza totale: 180mm.
Bilanciatura: -
Peso: 145g.
Chiusura: Back Lock
Clip: amovibile, in acciaio inox
Fodero: -
Note: impugnatura artigianale in pietra dura realizzata con la tecnica del mosaico10847 -
Spyderco - Lil Matriarch coltello - C162SBK - coltello
Spyderco - Lil Matriarch knife - C162SBK - knife
Intended use: EDC / Sports
Type of production: Industrial
Blade Production: Japan
Blade: stainless steel VG-10
Treatment Lama: -
Handle: FRN
Blade length: 75mm.
Blade thickness: 2mm.
Length closed: 107mm.
Total length: 180mm.
Thick when closed: -
Balance: -
Weight: 70g.
Closure: Back Lock
Clip: Stainless Steel
Sheath: -
package:
Cardboard box with logos Spyderco
Notes: -11000 -
Fantoni - RRK - Race Rescue Knife - PC001 - coltelli
Il coltello RRK (Race Rescue Knife) è stato sviluppato in collaborazione con l'RYA (Royal Yachting Association) allo scopo di servire da attrezzo multiruolo nell'ambito della sicurezza personale in una vasta gamma di applicazioni dinamiche.
Il fodero RRK, unico nel suo genere, è stato progettatto per il fissaggio permanente a canotto, yacht, gommone o imbarcazioni di salvataggio.
Destinazione d'uso: sportivo/rescue
Tipo di produzione: Industriale
Produzione Lama: Italia
Trattamento lama : HBC + Teflon Lama: in acciaio AISI 425
Manicatura: EPTR Thermorubber
Lunghezza lama: 105mm.
Spessore lama: 3mm.
Lunghezza Totale: 215mm
Peso: 223g.
Fodero: Nylon 666 + Fiberglass
Confezione: scatola in cartone con loghi1382 -
Spyderco - C08S Harpy - knife - coltello
Spyderco - C08S Harpy - knife
Intended use: Sport
Type of production: Industrial
Blade Production: Japan
Blade: Stainless steel VG-10 (suitable for cut tops - ropes - networks - the machine belts etc.).
Treatment Lama: -
Handle material: steel
Blade length: 70mm.
Blade thickness: 3mm.
Closed Length: 95mm.
Total length: 164mm.
Thick when closed: 8mm
Balance: -
Weight: 104g.
Closure: Back Lock
Clip: Stainless Steel
Sheath: -
Packaging: cardboard box with logos Spyderco
Notes:0223 -
Spyderco - Civilian knife - C12GS knife
Intended use: tactical
Type of production: industrial
Blade production: Japan
Blade: VG-10 stainless steel
Blade treatment: -
Handle: G-10 carrier with stainless steel right liner
Blade length: 106mm.
Blade thickness: 3mm.
Closed length: 132mm.
Total length: 234mm.
Balancing: -
Weight: 234g.
Closure: Back Lock
Clip: in stainless steel, reversible and removable
Scabbard: -
Note:C12GS -
Spyderco - Delica 4 Stainless Steel SpyderEdge - C11S coltelli
Destinazione d'uso: Sportivo
Tipo di produzione: industriale
Lama: in acciaio inox VG-10 58HRC
Trattamento Lama: -
Produzione Lama: Japan
Manicatura: in acciaio inox
Lunghezza lama: 75mm.
Spessore della lama: 2.5mm.
Lunghezza chiuso: 107mm.
Lunghezza totale: 180mm.
Bilanciatura: -
Peso: 115g.
Chiusura: Back Lock
Clip: amovibile, multiposizione, in acciaio inox
Fodero: -
Note: -SP-C11S -
Spyderco - Dragonfly Stainless Steel Serrated - SC28S - coltello
Destinazione d'uso: EDC/Sportivo
Tipo di produzione: Industriale
Produzione Lama: Japan
Lama: in acciaio inox VG-10
Trattamento Lama: -
Manicatura: acciaio inox
Lunghezza lama: 58mm.
Spessore lama: 2mm.
Lunghezza chiuso: 80mm.
Lunghezza totale: 140mm.
Spessore da chiuso: -
Bilanciatura: -
Peso: 74g.
Chiusura: Back Lock
Clip: in acciaio inox, amovibile
Fodero: -
Confezione: Scatola di cartone con loghi Spyderco
Note: -2265 -
Spyderco - Endura 4 Stainless Steel SpyderEdge - C10S - coltello
Destinazione d'uso: Sportivo
Tipo di produzione: industriale
Lama: in acciaio inox VG-10
Trattamento Lama: -
Produzione Lama: Japan
Manicatura: Acciaio Inox
Lunghezza lama: 95mm.
Spessore della lama: 3mm.
Lunghezza chiuso: 125mm.
Lunghezza totale: 220mm.
Bilanciatura: -
Peso: 161g.
Chiusura: Back Lock
Clip: amovibile, multiposizione, in acciaio inox
Fodero: -
Note: -3669 -
Spyderco - Ladybug Stainless Steel - LSSP3
Destinazione d'uso: Sportivo/EDC
Tipo di produzione: Industriale
Produzione Lama: Japan
Lama: in acciaio inox VG-10
Trattamento Lama: -
Manicatura: acciaio inox
Lunghezza lama: 49mm.
Spessore lama: 2mm.
Lunghezza chiuso: 62mm.
Lunghezza totale: 111mm.
Spessore da chiuso: 8mm.
Bilanciatura: -
Peso: 36g.
Chiusura: Back Lock
Clip: -
Fodero: -
Confezione: astuccio di cartone con loghi Spyderco
Note: -3759 -
Spyderco - Manix 2 G10 - C101GS2 knife
Intended Use: Sport / EDC
Type of production: Industrial
Production Lama USA
Blade: Stainless steel 154CM
Treatment Lama: -
Handle: G-10 with stainless steel liners
Blade length: 86mm.
Blade thickness: 3mm.
Length closed: 117mm.
Total length: 203mm.
Thick when closed: 19mm.
Balance: -
Weight: 152g.
Closure: Ball Bearing Lock
Clip: Stainless Steel
Sheath: -
Packaging: cardboard box with logos Spyderco
Notes: -3745 -
Spyderco - Pacific Salt Black - C91SBK2 - coltello
Destinazione d'uso: sub/sportivo
Tipo di produzione: Industriale
Produzione Lama: Japan
Lama: in acciaio all'azoto H1
Trattamento Lama: -
Manicatura: FRN
Lunghezza lama: 95mm.
Spessore lama: 3mm.
Lunghezza chiuso: 123mm.
Lunghezza totale: 220mm.
Spessore da chiuso: 15mm.
Bilanciatura: -
Peso: 82g.
Chiusura: Back Lock
Clip: amovibile, in acciaio inox
Fodero: -
Confezione: scatola in cartone nera e rossa con loghi Spyderco
Note: Questo coltello ha una lama in acciaio PH (precipitation hardened) che non arrugginisce in quanto contiene solo lo 0.15% di carbonio e circa lo 0.10% di azoto risultando particolarmente adatto ad usi subacquei e marini. I voti prodotto sono quindi dati tenendo conto di questo utilizzo primario.3699B -
Spyderco - Pacific Salt Yellow - C91SYL - coltello
Destinazione d'uso: sub/sportivo
Tipo di produzione: Industriale
Produzione Lama: Japan
Lama: in acciaio all'azoto H1
Trattamento Lama: -
Manicatura: FRN
Lunghezza lama: 95mm.
Spessore lama: 3mm.
Lunghezza chiuso: 123mm.
Lunghezza totale: 220mm.
Spessore da chiuso: 15mm.
Bilanciatura: -
Peso: 82g.
Chiusura: Back Lock
Clip: amovibile, in acciaio inox
Fodero: -
Confezione: scatola in cartone nera e rossa con loghi Spyderco
Note: Questo coltello ha una lama in acciaio PH (precipitation hardened) che non arrugginisce in quanto contiene solo lo 0.15% di carbonio e circa lo 0.10% di azoto risultando particolarmente adatto ad usi subacquei e marini. I voti prodotto sono quindi dati tenendo conto di questo utilizzo primario.3699 -
Spyderco - Rescue Wave - C14SGYW coltello
Destinazione d'uso: Sportivo/soccorso
Tipo di produzione: industriale
Lama: in acciaio inox VG-10 58HRC
Trattamento Lama: -
Produzione Lama: Japan
Manicatura: gray FNR con liners annegati in acciaio inox
Lunghezza lama: 94mm.
Spessore della lama: 3mm.
Lunghezza chiuso: 115mm.
Lunghezza totale: 207mm.
Bilanciatura: -
Peso: 78g.
Chiusura: Back Lock
Clip: in acciaio teflonata
Fodero: -
Note: gancio Wave per apertura facilitata patented by Emerson Knives sviluppato originariamente per le unità speciali U.S. Navy SEALs3697