Knives, collection knife, tactical knives, outdoor knives, pocket knives and tools
-
Fallkniven - H1 Zytel - Elmax & Thermorun - Swedish hunting knife
The Fallkniven H1 knife is a very handy knife with impressive strength. The H1 is our first true hunting knife and encapsulates the history of Nordic Scandinavian cutlery art. Because of this heritage, the H1 does not have a standard finger guard, but grip security is improved by the ergonomic thermorun plastic handle.
The special design of the H1 blade is used to work game while hunting. The H1 knife may look different, but it works very well. In many ways, the performance of a knife depends on the person holding it. Knowing where and how to properly carve game goes beyond the knife. Hunters must avoid wrong cuts, keep hair off the meat, avoid cutting organs, and minimize blood flowing onto the game and the hunter. The combination of an experienced hunter and a well-designed knife is unbeatable!
Intended use: huntingType of production: Industrial
Country of manufacture: Sweden
Blade: Elmax SuperClean stainless steel at 61/62HRC
Blade finish: Satin finish
Handle: Thermorun
Blade length: 100mm.
Blade thickness: 5mm.
Total length: 210mm.
Balance: backward
Weight: 175g.
Sheath: made of Zytel
Packaging: white cardboard case with Fallkniven logos
Notes: -F-H1zElmax -
Fallkniven - F1 Pro Knife Survival Kit - USED - PRIVATE COLLECTION - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously purchased and used in hiking phase.
* Condition: Used and resharpened, well maintained, with no particular damage or structural defects
* Commercially available: Discontinued and no longer commercially available.
* Sharpening: Re-sharpened
* Marks on blade: Signs of use.
* Marks on handle: Signs of use.
* Box: Present and complete, with DC4 sharpener used
* Scabbard: Present and in excellent condition.
* Manuals, Certificates and Warranties: -.
* Checked and Certified by our in-house laboratory
Intended Use: Hiking / All round utilityBlade: hidden tang, CoS rolled stainless steel at 60HRC
Handle: Thermorun, with stainless steel guard
Blade length: 100mm.
Blade thickness: 7mm.
Total length: 215mm.
Balance: advanced to 0.5cm. from the lower guard branch
Weight: 178g.
Sheath: zytel
Notes: discontinued knife, previously purchased and used - cardboard box with Fallkniven logos, watertight ABS case with Fallkniven logos, used Fallkniven DC4 sharpening stone, accompanied by leather caseF-F1PRO-CP -
Fallkniven - F1 Wolf - VG-10W Laminated and Leather Sheath - knife
New "Wolf" version using a steel enriched with 1.25% Tungsten (also known as Wolfram in chemistry) which makes the edge tougher, more resilient and provides greater sharpness retention.
Intended use: tactical/military/huntingBlade: full tang in San-Mai VG-10Wolf / 420J2 59HRC stainless steel
Handle: Thermorun E
Blade length: 105mm.
Blade thickness: 4.5mm.
Total length: 215mm.
Balance: set back 2.5cm from the lower guard branch.
Weight: 150g.
Sheath: leather
Notes: official knife of Swedish Air Force pilots since 1995.F-F1LW -
Fallkniven - F1xB Utility Knife - Elmax Steel - Tungsten Carbide Finish - knife
Intended use: Hiking / Hunting
Production type: industrial
Country of Production: Japan
Blade: full tang, stainless steel Elmax at 61/62HRC
Blade finishing: black coating (Tungsten Carbide)
Handle: Thermorun
Blade Length: 100mm.
Blade thickness: 5mm.
Total length: 220mm.
Balance: set back 2cm. from the guard branch
Weight: 222g.
Scabbard: in zytel, for vertical carrying, with additional safety.
Notes: -F-F1XBElmax -
Fallkniven - F1x Utility Knife - Elmax Steel - knife
Intended use: Hiking / Hunting
Production type: industrial
Country of production: Japan
Blade: full tang, made of Elmax stainless steel at 61/62HRC
Blade finishing: satin finish
Handle: Thermorun
Blade length: 100mm.
Blade thickness: 5mm.
Total length: 220mm.
Balance: set back 2cm. from the guard branch
Weight: 222g.
Scabbard: in zytel, for vertical carrying, with additional safety.
Notes: -F-F1XElmax -
Fallkniven - Taiga Forester - TF1 - SanMai CoS Steel - Desert Ironwood - knife
Intended Use: Hiking / Hunting / Collection
Production type: industrial
Country of production: Japan
Blade: Japanese rolled stainless steel CoS at 60HRC
Blade Treatment: Satin finish
Handle: Desert Ironwood
Blade Length: 120mm.
Blade thickness: 5mm.
Total length: 235mm.
Balance: backward
Weight: 230g.
Sheath: zytel
Notes: -F-TF1Z -
Fallkniven - Taiga Forester - TF2 - SanMai CoS Steel - thermorun - knife
Intended use: Hiking / Hunting
Type of production: industrial
Country of production: Japan
Blade: Japanese rolled stainless steel CoS at 60HRC
Blade treatment: Satin finish
Handle: Thermorun
Blade length: 120mm.
Blade thickness: 5mm.
Total length: 235mm.
Balance: backward
Weight: 185g.
Scabbard: zytel
Notes: -F-TF2Z -
Fallkniven - Taiga Hunter knife - TH - SanMai CoS Steel - thermorun - knife
The taiga knives are distinctive hunting and all-round knives for the demanding user. A strong blade in laminated cobalt steel does not only mean a stable function, you notice quite quickly that the edge holds the sharpness really well without being brittle. The reason is the fine, well heat treated and tempered steel but also the convex shaped edge that is not only strong but also wood-sharp. The ergonomic shape of the handle provides a secure grip regardless of weather and wind.If you look at function and most value for money, the rubber-handle Taiga blades should be preferred. Regardless of the weather and wind, the rubber handle gives a really good grip and when it comes to the steel properties they are of course as good as the knives with wooden handles.Intended use: Hiking / Hunting / Collection
Type of production: industrial
Provenance Lama: Japan
Blade: Japanese CoS laminated stainless steel at 60HRC
Blade treatment: -
Handle: Thermorun
Blade length: 84mm.
Blade thickness: 4.5mm.
Total length: 188mm.
Balancing: backward to 2cm. from the guard branch
Weight: 116g.
Sheath: zytel
Note: -F-TH2Z -
Fallkniven - Taiga knife SK2L - SanMai CoS Steel - ironwood - knife
The taiga knives are distinctive hunting and all-round knives for the demanding user. A strong blade in laminated cobalt steel does not only mean a stable function, you notice quite quickly that the edge holds the sharpness really well without being brittle. The reason is the fine, well heat treated and tempered steel but also the convex shaped edge that is not only strong but also wood-sharp. The ergonomic shape of the handle provides a secure grip regardless of weather and wind.As shown in the design, TH1 is a handmade knife with a handle in the very exclusive desert ironwood (lat. Olneya tesota). This species is not listed in CITES Annexes or the IUCN Red List of Endangered Species and is therefore legal to use. Like all natural materials, it varies in texture and color, making each knife an individual creation. A beautifully veined pattern may look attractive but a straight, patterned handle is actually stronger. Desert ironwood, which grows in the southwestern United States, has a somewhat peculiar quality – it is heavier than water, its density is 1.2 kg/dm³ which means it will sink. If you want to maintain or even increase the luster in the wood, treat it with log oil, furniture oil, bench oil or other type of wood oil containing linseed oil. The fact that the blade goes full width through the handle (so-called full tang blade) results in a very strong and reliable construction and gives a comfortable weight to the knife.Intended use: Hiking / Hunting / Collection
Type of production: industrial
Provenance Lama: Japan
Blade: Japanese CoS laminated stainless steel at 60HRC
Blade treatment: -
Handle: ironwood
Blade length: 84mm.
Blade thickness: 4.5mm.
Total length: 188mm.
Balancing: backward to 2cm. from the guard branch
Weight: 149g.
Sheath: zytel
Note: -F-TH1Z -
Fallkniven - Embla knife SK2L - SanMai CoS Steel - ironwood - knife
Intended use: Hiking / Hunting / Collection
Type of production: industrial
Origin: Lama: Japan
Blade: in CoS 60HRC laminated stainless steel
Blade treatment: -
Handle: ironwood
Blade length: 9.5mm.
Blade thickness: 4.5mm.
Total length: 210mm.
Balancing: set back to 2cm. from the guard branch
Weight: 148g.
Sheath: black leather
Note: -F-SK2L -
Fallkniven - S1x Survival Knife - SanMai CoS Steel - knife
Intended use: Hiking / Hunting
Type of production: industrial
Origin: Lama: Japan
Blade: full tang, in CoS 60HRC laminated stainless steel
Blade treatment: -
Handle: Thermorun
Blade length: 132mm.
Blade thickness: 6mm.
Total length: 249mm.
Balancing: advanced to 1cm. from the guard branch
Weight: 290g.
Closing: -
Sheath: in zytel
Note: -
Send feedback
History
Saved
CommunityF-S1X -
Fallkniven - S1xb Survival Knife Black - SanMai CoS Steel - knife
Intended use: Hiking / Hunting
Type of production: industrial
Origin: Lama: Japan
Blade: full tang, in CoS 60HRC laminated stainless steel
Blade treatment: Tungsten Carbide
Handle: Thermorun
Blade length: 132mm.
Blade thickness: 6mm.
Total length: 249mm.
Balancing: advanced to 1cm. from the guard branch
Weight: 290g.
Closing: -
Sheath: in zytel
Note: -
Send feedback
History
Saved
CommunityF-S1XB -
Fallkniven - MB - Modern Bowie - Satin SanMai CoS - knife
Destination of use: Hiking / Hunting
Blade: hidden tang, in CoS 60mm stainless steel
Country of production: Japan
Handle: Thermorun, with stainless steel guard
Blade Length: 254mm.
Blade thickness: 7.41mm.
Overall length: 387mm.
Balance: advanced to 0.5cm. from the lower guard branch
Weight: 565g.
Sheath: black leather
Notes: Fallkniven cardboard box, ABS sealed cushion with fallkniven logos, Fallkniven DC4 sharpening stone with leather caseF-MB -
Fallkniven - A1 BLK - knife
Intended Use: Tactical / Military
Blade: full tang stainless steel San-Mai VG-10/420J2 59HRC coated black Ceracoat 8H
Handle: Kraton
Blade length: 160mm.
Blade thickness: 6mm.
Length closed:-mm.
Total length: 280mm.
Balance: advanced to 0.5cm. the branch of lower guard
Weight: 305g.
Closing: -
Clip: -
Sheath: Zytel tactical
Notes:F-A1BLZ -
Fallkniven - A1 Zytel knife - coltello
Destinazione d'uso: sportivo/caccia/militare
Lama: full tang in acciaio inox San-Mai VG-10/420J2 59HRC
Manicatura: Kraton
Lunghezza lama: 160mm.
Spessore della lama: 6mm.
Lunghezza chiuso: -mm.
Lunghezza totale: 280mm.
Bilanciatura: avanzata a 0.5cm. dal ramo di guardia inferiore
Peso: 305g.
Chiusura: -
Clip: -
Fodero: in zytel
Note:F-A1Z -
Fallkniven - A2 - knife
Survival knife - News from the Swedish company larger than the A1 model.
Thanks to its extreme solidity, strength and hardness, it lends itself easily to the most extreme and hard.
- Steel blade VG10 from 200 mm to a thickness of 6 mm
- Total length 330 mm
- Weight 380 grams
- Black leather sheathF-A2 -
Fallkniven - F1 BLK - knife
Intended Use: Tactical / Military / Hunting
Blade: full tang stainless steel 59HRC San-Mai VG-10/420J2 with black Teflon coating
Handle: It Thermorun
Blade length: 105mm.
Blade Thickness: 4.5mm.
Closed Length: - mm.
Total length: 215mm.
Balance: back to 2.5 cm from the lower branch of the guard
Weight: 150g.
Closing: -
Clip: -
Sheath: Kydex
Notes: knife official Swedish Air Force pilots since 1995F-F1BL -
Fallkniven - NL1 - Thor - knife
Intended Use: hunting / sporting
Blade: full tang stainless steel 59HRC San-Mai VG-10/420J2
Handle: rings Ox-Hide (cowhide) E
Blade length: 254mm.
Blade Thickness: 7mm.
Length closed:-mm.
Total length: 385mm.
Balance: advanced to 3.5 cm. the branch of lower guard
Weight: 520g.
Closing: -
Clip: -
Sheath: leather high quality
Notes: 420J2 stainless guard and aluminum endcapsF-NL1 -
Fallkniven - NL2 - Odin - knife
The Fallkniven Odin (first in importance among the Celtic gods) is the second model after Thor in order of size, the beautiful Northern Light series.
The knife is handmade using only top quality materials.Intended Use: collection / Survival
Type of production: Industrial
Production Blade: Japan
Blade: VG10 (HRC 59)
Treatment Lama: -
Handle material: Polymer
Blade length: 200mm.
Blade thickness: 6.5 mm.
Length closed: -
Total length: 325mm.
Thick when closed: -
Balance: -
Weight: 380g.
Closing: -
Clip: -
Sheath: leather, exquisite workmanship and robustness.
Packaging: cardboard box
Notes:F-NL2 -
Fallkniven - NL3 - Njord - knife
Intended Use: hunting / sporting
Blade: full tang stainless steel 59HRC San-Mai VG-10/420J2
Handle: rings Ox-Hide (cowhide) E
Blade length: 150mm.
Blade Thickness: 5mm.
Length closed:-mm.
Total length: 268mm.
Balance: advanced to 0.5 cm. the branch of lower guard
Weight: 280g.
Closing: -
Clip: -
Sheath: leather high quality
Notes: 420J2 stainless guard and aluminum endcapsF-NL3 -
Fallkniven - NL4 - Frey - knife
Intended Use: hunting / sporting
Blade: full tang stainless steel 59HRC San-Mai VG-10/420J2
Handle: rings Ox-Hide (cowhide) E
Blade length: 130mm.
Blade Thickness: 5mm.
Length closed:-mm.
Total length: 244mm.
Balance: backward to 1 cm. the branch of lower guard
Weight: 190g.
Closing: -
Clip: -
Sheath: leather high quality
Notes: 420J2 stainless guard and aluminum endcapsF-NL4 -
Fallkniven - NL5 - Idun - knife
Fallkniven Sweden - Idun (Celtic god of fertility and youth) is a very compact with excellent finishes, perfect for use of hunting - The knife is handmade using only top quality materials
Intended Use: collection / Survival
Type of production: Industrial
Production Blade: Japan
Blade: full tang stainless steel 59HRC San-Mai VG-10/420J2
Handle: rings Ox-Hide (cowhide) E
Blade length: 100mm.
Blade thickness: 5mm.
Length closed: -
Overall Length: 220mm.
Thick when closed: -
Balance: -
Weight: 170g.
Closing: -
Clip: -
Sheath: leather, exquisite workmanship and robustness.
Packaging: cardboard box
Notes:F-NL5 -
Fallkniven - NL5cx - Idun Damasco - coltello
Destinazione d'uso: collezione/caccia
Tipo di produzione: industriale
Lama: in acciaio damasco "Cowry-X" 64HRC
(3%C 20%Cr 1%Mo 0.3%V)
Trattamento Lama: -
Manicatura: anelli di cuoio con guardia e cap in nickel silver
Lunghezza lama: 100mm.
Spessore della lama: 5mm.
Lunghezza chiuso: -
Lunghezza totale: 215mm.
Bilanciatura: -
Peso: 180g.
Chiusura: -
Clip: -
Fodero: cucito a mano, in cuoio
Note: -F-NL5CX -
Fallkniven - PHK - knife
Intended Use: Sport / Hunting
Type of production: Industrial
Production Blade: Japan
Blade: 3G stainless steel, three-layer laminate (VG2 and SGPS "Super Gold Powder Stainless Steel" to 62 HRC)
Treatment Blade:
Handle: Thermorun And with stainless guard
Blade length: 127mm.
Blade thickness: 5mm.
Length closed -
Total length: 240mm.
Thick when closed: -
Balance: backward, to 1.5cm from the guard
Weight: 194g.
closing time:
Clip: -
Sheath: Zytel
Packaging: cardboard box with logos Fallkniven
Note: Each piece is numberedF-PHK -
Fallkniven - S1 knife Black Zytel - coltello
Destinazione d'uso: sportivo/caccia/militare
Lama: full tang in acciaio inox San-Mai VG-10/420J2 59HRC con rivestimento nero CeraCoat 8H
Manicatura: Thermorun E
Lunghezza lama: 130mm.
Spessore della lama: 5mm.
Lunghezza chiuso: -mm.
Lunghezza totale: 247mm.
Bilanciatura: in corrispondenza del ramo di guardia inferiore
Peso: 190g.
Chiusura: -
Clip: -
Fodero: Zytel
Note:F-S1BLZ -
Fallkniven - S1 Zytel - knife
Intended Use: Sport / Hunting / Military
Blade: full tang stainless steel 59HRC San-Mai VG-10/420J2
Handle: It Thermorun
Blade length: 130mm.
Blade Thickness: 5mm.
Length closed:-mm.
Total length: 247mm.
Balance: at the lower branch of the guard
Weight: 190g.
Closing: -
Clip: -
Sheath: Zytel
Notes:F-S1Z -
Fallkniven - SK1 Jarl Betulla - fodero in cuoio - coltello
Destinazione d'uso: Caccia
Tipo di produzione: industriale
Lama: Acciaio 3G laminato a tre strati (VG2 e SGPS "Super Gold Powder Stainless Steel" a 62 HRC)
Trattamento Lama: -
Produzione Lama: Giappone
Manicatura: Legno di Betulla
Lunghezza lama: 100mm.
Spessore della lama: 4,5mm.
Lunghezza totale: 210mm.
Bilanciatura: arretrato di 1 cm dal ramo di guardia
Peso: 134g.
Fodero: Cuoio
Note: -F-SK1 -
Fallkniven - SK3 Juni Birch - leather sheath - knife
Intended Use: Hunting
Type of production: industrial
Blade: Stainless 3G three-layer laminate (VG2 and SGPS "Super Gold Powder Stainless Steel" to 62 HRC)
Treatment Lama: -
Production Blade: Japan
Handle: Birch Wood
Blade length: 69mm.
Blade Thickness: 3mm.
Total length: 145mm.
Balance: backlog of 1 cm from the branch guard
Weight: 54g.
Sheath: Leather
Notes: -F-SK3 -
Fallkniven - TK3ic knife - Cocobolo - coltello
Fallkniven Tre Kronor TK3
La linea "Tre Kronor" fonde le più moderne tecnologie martensitiche con le antiche radici della famiglia reale svedese.
Questi coltelli, infatti, sono gli unici a potersi fregiare del simbolo reale delle tre corone poste sulla lama e sulla splendida confezione in legno che contiene il coltello ed il fodero.
L'acciaio laminato utilizzato è attualmente uno dei migliori acciai industriali in commercio ed è composto da una lamina interna in SGPS da polvere, acciaio già utilizzato per il modello U2, a 62HRC accopiato a due guancette esterne in VG2. I coltelli rivelano così eccezionali doti di taglio, penetrazione e tenuta del filo.
Lama: Acciaio 3G laminato a tre strati (VG2 e SGPS "Super Gold Powder Stainless Steel" a 62 HRC)
Manicatura: Legno di Cocobolo
Lunghezza lama: 70 mm.
Spessore della lama: 2.5 mm.
Lunghezza totale: 165 mm.
Peso: 100 g.
Chiusura: Backlock
Fodero: Nero, in corduraF-TK3ic -
Sanelli - American Olive Scimitar BBQ Knife 26cm - 1186.26 - Kitchen Knife
The Sanelli Olive American Scimitar BBQ Knife with a length of 26 cm is a kitchen knife designed specifically for grilling meat. Its curved, sharp shape is reminiscent of a scimitar blade, which allows for precise and clean cutting through larger pieces of meat.
This knife is made by Sanelli, a renowned Italian brand specializing in the production of high-quality kitchen knives. The blade is made of durable and sharp stainless steel, ensuring long-lasting performance.
The ergonomic handle provides a secure and comfortable grip during use, allowing the knife to be handled with precision and control. This makes the knife suitable for slicing, cutting and mincing different types of meat.
It is an excellent choice for grilling enthusiasts and those who like to prepare barbecued meat. It is a sturdy and reliable kitchen knife designed to meet the needs of both professional and amateur chefs.
Recommended Use: cutting cooked meats, roasts, barbecues, trimming
Country of manufacture: Italy
Blade: surgical stainless steel with hardness of 54-56 HRC
Handle: made of sterilizable anti-corrosion polymer, with Biomaster antibacterial additive
Blade length: 260mm.
Total length: 400mm.
Packaging: cardboard blade cover with Sanelli logos
s118626 -
Sanelli - BBQ - Scimitar Knife 26cm - Kitchen Knife - s1196.26
Recommended Use: cutting cooked meats, roasts, barbecues, trimming
Country of manufacture: Italy
Blade: made of surgical stainless steel with a hardness of 54-56 HRC
Handle: made of sterilizable anti-corrosion polymer, with Biomaster antibacterial additive
Blade length: 260mm.
Total length: 400mm.
Packaging: cardboard blade cover with Sanelli logosFORM AND FUNCTION
The Premana Professional line was created by analyzing and solving, in every detail, the problems faced by the most attentive professional who uses these working tools on a daily basis. By making the green knives of the Premana Professional line, Coltellerie Sanelli S.r.l. has significantly improved the concept of safety, reliability, and hygiene in a decisive way, paying attention not only to the hardness, flexibility and shearing power of the blades, but also to the ergonomic shape of the handle.THE BLADES.
The convex shape of the blade provides effective support when considerable effort is required on the part of the user and is also characterized by: high hardness (54-56 HRC), good flexibility, high shearing power, long edge life, edge shape especially designed for professional use, and excellent ease of resharpening.HANDLES.
Exclusive ergonomic design of the handle resulting from special studies carried out at qualified University Institutes (research unit called EPM: Ergonomics of Posture and Movement at the Polytechnic University of Milan) and validated by computerized experimental tests.ANTIBACTERIAL PROTECTION
Sanelli and Biomaster have developed permanent antibacterial protection for the handles of Premana line knives through the use of silver ions.
Biomaster is a silver ion-based, inorganic additive suitable for imparting antibacterial characteristics to plastics that safely inhibits microbial growth from the first few minutes, reaching almost total inhibition within 24 hours. Once incorporated into a product, Biomaster becomes an integral part of it providing safe, effective and inexhaustible antimicrobial protection.
Laboratory tests have shown that Biomaster, incorporated into the handles of Sanelli Premana Professional Line knives, is effective in the permanent microbiological eradication of Escherichia Coli and Staphylococcus Aureus (MRSA) to the extent of 99.7 percent, obtaining ISO22196:20111 certification.s1196.26 -
Sanelli - BBQ - scimitar knife 30cm - s1196.30 - Kitchen knives
The Sanelli BBQ Scimitar Knife with a length of 30 cm is a kitchen knife designed specifically for cutting meat. Its curved, sharp shape is reminiscent of a scimitar blade, allowing clean and precise cutting through larger pieces of meat, such as steaks, chops or roasts.
This knife is made by Sanelli, an Italian brand that specializes in producing high-quality kitchen knives. The blade is made of durable stainless steel and sharpened to ensure long-lasting performance. The 30 cm scimitar offers sufficient length to handle large pieces of meat with ease.
The knife handle is ergonomic and made of durable material to provide a secure and comfortable grip during use. This makes the knife stable and easy to handle, allowing it to make precise cuts effortlessly and without fatiguing the hand.
It is an ideal choice for grilling enthusiasts and chefs who often work with large pieces of meat. It is a sturdy, high-quality tool designed to deliver reliable performance in the kitchen.
Recommended Use: cutting cooked meats, roasts, barbecues, trimming
Country of manufacture: Italy
Blade: surgical stainless steel with hardness of 54-56 HRC
Handle: made of sterilizable anti-corrosion polymer, with Biomaster antibacterial additive
Blade length: 300mm.
Total length: 440mm.
Packaging: cardboard blade cover with Sanelli logos
s119630 -
Fallkniven - F1 Elmax - 40th Anniversary Set - Limited Edition - knife
Fällkniven AB celebrates its 40th anniversary in the international knife market with a special version of its bestseller, the F1 Pilot survival knife, now made of high-quality Swedish steel (Elmax). This special model originates from 1987, when the Swedish Air Force commissioned Fällkniven to develop a new survival knife for the technical environment of the JAS 39 Griffin system.
The first delivery of thousands of F1 knives to the Swedish Armed Forces took place in August 1995, and sales to the civilian market began the following year. The success was remarkable: Fällkniven introduced an innovative philosophy for survival knives, in stark contrast to the outdated technologies that had dominated the development of combat and survival knives since World War II.
Intended use: allrounder utilityBlade: Elmax stainless steel at 61/62HRC, satin-finished, with convex sharpening
Handle: Thermorun E
Blade length: 105mm.
Blade thickness: 4.5mm.
Total length: 215mm.
Balance: backward
Weight: 149g.
Sheath: zytel, with anti-extraction safety
Notes: limited edition to celebrate 40 years of the company's business sold in cardboard box with DC4 diamond sharpenerF-F1anniv -
Fallkniven - R2 Scout Survival - Elmax - knife
Intended use: Hiking / Utility
Production type: industrial
Country of production: Japan
Blade: hidden tang, Elmax stainless steel at 62HRC
Blade finish: Satin finish
Handle: Thermorun
Blade length: 80mm.
Blade thickness: 4.8mm.
Total length: 181mm.
Balance: set back 2cm. from the guard branch
Weight: 132g.
Scabbard: zytel
Notes: Sharpening convex typeF-R2Z-Scout -
Fallkniven - A1xb Expedition Knife Black - SanMai CoS Steel - knife
Intended use: Hiking / Hunting
Type of production: industrial
Origin: Lama: Japan
Blade: full tang, in CoS 60HRC laminated stainless steel
Blade treatment: Tungsten Carbide
Handle: Thermorun
Blade length: 160mm.
Blade thickness: 7mm.
Total length: 280mm.
Balancing: advanced at 0.5cm. from the lower guard branch
Weight: 400g.
Closing: -
Sheath: in zytel
Note: -F-A1XB -
Fallkniven - A1x Expedition Knife - outdoor knife - knife
Intended use: Hiking / Hunting
Type of production: industrial
Origin: Lama: Japan
Blade: full tang, in CoS 60HRC laminated stainless steel
Blade treatment: -
Handle: Thermorun
Blade length: 160mm.
Blade thickness: 7mm.
Total length: 280mm.
Balancing: advanced at 0.5cm. from the lower guard branch
Weight: 400g.
Closing: -
Sheath: in kydex
Note: -F-A1X -
Forge de Laguiole - Philippe Starck - Jojo long legs - coltello formaggio - fuori produzione
Laguiole en Aubrac - Philippe Starck - Jojo long legs - coltello formaggio All'inizio degli anni '80, nel villaggio di Laguiole in Aubrac, l'arte della coltelleria di Laguiole era scomparsa... Nel 1987 la fabbrica Forge de Laguiole rilancia la produzione di mitici coltelli nel suo villaggio d'origine, rispettando l'eredità dell'arte della tradizione. È la rinascita di un coltello cult, referenza del design, sinonimo di qualità e arte di vivere. Ogni coltello è un pezzo unico che può richiedere diversi giorni di produzione! Un solo coltellinaio altamente qualificato realizza, in più di 40 fasi, un coltello d'eccezione, che durerà una vita. Tra tradizione e creazione, Forge de Laguiole apporta un tocco di innovazione, rivolgendosi ai più grandi designer. Questo splendido coltello da formaggio firmato Philippe Starck ha un elegante manico in bachelite nera Presentato all'esposizione universale di Siviglia nel 1992, ha permesso a Forge de Laguiole di ricevere il premio del Design Europeo.
Elegante, le sue linee inimitabili ed essenziali ne fanno un vero capolavoro d'equilibrio ed estetica. La forma del manico è stata semplicemente studiata perchè il coltello possa rimanere in equilibrio sul suo bordo. Philipe Starck, architetto e designer francese ha partecipato al progetto della Forge de Laguiole fin dall'inizio delle sue avvenure. Dopo aver ideato nel 1987 l'edificio della Forge de Laguiole ha ideato i primi negozi del marchio; così, sarà dunque anche il primo a ripensare il coltello di Laguiole. Caratteristiche:
Colore : nero Materiale : Acciaio inossidabile - Bachelite Dimensioni : Lunghezza totale: 30 cm - Lama: lunghezza 15 cm Origini: Coltello originale Laguiole interamente prodotto a Laguiole in Aveyron (più di 40 fasi successive sono necessarie alla sua realizzazione)5551S -
Forge de Laguiole - Munoz Caballero Corno con blocco lama - coltello collezione
Coltello realizzato dal famoso Virgilio Munoz Caballero. Questo artigiano è stato insignito nel 1986 del titolo di Migliore Operario Francese nella categoria dei coltelli da collezione.
Dal 1984 collabora con Forge de Laguiole realizzando pezzi d'eccezione con uno stile personale che associa precisione e tecnica alla finezza delle decorazioni e incisioni.
Lama: in acciaio inox 12C27
Manicatura: corno
Lunghezza lama: 90 mm.
Spessore della lama: 3 mm.
Lunghezza totale: 220 mm.
Peso: 108 g.
Cartelle: Acciaio Inox lucido
Testine: Acciaio Inox lucido
Chiusura: Molla di ritenzione in acciaio Inox lucido
note: uno dei pochi Laguiole con il blocco lama2891 -
Forge de Laguiole - Radica di Ginepro - coltello collezione
Destinazione d'uso: Collezione
Lama: in acciaio inox 12C27
Produzione Lama Laguiole, Francia
Manicatura: Radica
Lunghezza lama: 85mm.
Spessore della lama: 3mm.
Lunghezza chiuso: 110mm.
Lunghezza totale: 205mm.
Bilanciatura: -
Peso: 56g.
Chiusura: Molla di ritenzione
Clip: -
Fodero: -
Note: -2491 -
Forge de Laguiole - Yan Pennor collection - corian bianco - coltello
Creato dal disegnatore Yan Pennor questo coltello ha ottenuto il premio "French Grand Prize"
Lama: in acciaio inox 12C27
Manicatura: corian bianco
Lunghezza lama: 90 mm.
Spessore della lama: 3 mm.
Lunghezza totale: 205 mm.
Peso: 80 g.
Cartelle: Acciaio Inox lucido
Chiusura: Molla di ritenzione in acciaio Inox lucido
Clip: Assente
Fodero: Assente
scatola regalo2892 -
Forge de Laguiole - Yan Pennor collection - fibra di carbonio - coltello
Creato dal disegnatore Yan Pennor questo coltello ha ottenuto il premio "French Grand Prize"
Lama: in acciaio inox 12C27
Manicatura: fibre di carbonio
Lunghezza lama: 90 mm.
Spessore della lama: 3 mm.
Lunghezza totale: 205 mm.
Peso: 80 g.
Cartelle: Acciaio Inox lucido
Chiusura: Molla di ritenzione in acciaio Inox lucido
Clip: Assente
Fodero: Assente
scatola regaloserie numerata2894 -
Forge de Laguiole - Yan Pennor collection knife - corno - coltello collezione
Creato dal disegnatore Yan Pennor questo coltello ha ottenuto il premio "French Grand Prize"
Lama: in acciaio inox 12C27
Manicatura: corno
Lunghezza lama: 90 mm.
Spessore della lama: 3 mm.
Lunghezza totale: 205 mm.
Peso: 80 g.
Cartelle: Acciaio Inox lucido
Chiusura: Molla di ritenzione in acciaio Inox lucido
Clip: Assente
Fodero: Assente
scatola regaloserie numerata2893 -
Mil-Tac & Fox - Breeden Bali - FX-MTF4 knife
Mil-Tac & Fox - Breeden Bali - FX-MTF4 knife
Intended use: Tactical / Sport
Type of production: Industrial
Production Blade: Italy
Blade: Stainless steel N690Co
Treatment Blade: Titanium Nitride
Handle: Stainless steel, G10 and Micarta spacers
Blade length: 95mm.
Blade thickness: 3.5mm.
Closed Length: 134mm.
Overall length: 227mm.
Thick when closed: 19mm.
Balancing: -
Weight: 202g.
Closure: Magnetic
Clip: -
Sheath: -
Packaging: Box of aluminum with Fox logos
Note: When closed, it can be used as a sturdy crowbar - the magnets do not allow opening and closing smooth and fast as on common balisong - deign by Jason Breeden7722€72.95Out of stock