Knives, collection knife, tactical knives, outdoor knives, pocket knives and tools
-
Horl - 2 PRO - diamond and ceramic disc sharpener - Made in Germany
With HORL ® 2 Pro, Otmar and Timo Horl are making a very personal dream come true. With a high precision internal planetary gear, it triples the grinding motion generated by a simple rolling motion. Therefore, HORL ® 2 Pro sharpens at triple speed. The solid components made of stainless steel and aluminum give it a particularly noble appearance.
TWO DISCS
DIAMOND ABRASIVE The industrial diamonds used are suitable for effectively sharpening all steel for knives of any degree of hardness without water. When used correctly, the HORL ® Diamond Standard never needs to be replaced. The 46 μm grain size sharpens efficiently and precisely. In a short time, a high-quality sharpening result is achieved. The discs of the HORL ® 2 CRUISE are not replaceable
CERAMIC SANDING WHEEL After processing with HORL ® Diamond Standard, the ceramic sanding disc noticeably improves the sanding result. Only a few movements are needed for this. The result is a smooth, clean and filigree sharp knife edge.
SUPERIOR EFFICIENCY
Industrial diamonds are considered to be one of the most durable and effective abrasives on the market. Monocrystalline diamonds are harder than any knife steel. Using a galvanic process, the diamonds in the HORL ® Diamond Standard are set at approx. 55% in a nickel bed. After the first grinding processes, the initially rough surface becomes finer and HORL® Diamond Standard achieves the ideal sanding surface.
HOR-2PRO -
Horl - 2 OAK - sharpener with diamond and ceramic disc - Made in Germany
HORL ® 2 is the latest technological benchmark in the HORL ® family of sharpeners. Two sharpening angles and interchangeable grinding discs ensure greater flexibility. A completely new, play-free rolling sensation is created by the integrated ball bearings. The ceramic coating on the smoothing side guarantees impressive finishing results.
TWO DISCS
DIAMOND ABRASIVE The industrial diamonds used are suitable for effectively sharpening all steel for knives of any degree of hardness without water. When used correctly, the HORL ® Diamond Standard never needs to be replaced. The 46 μm grain size sharpens efficiently and precisely. In a short time, a high-quality sharpening result is achieved. The discs of the HORL ® 2 CRUISE are not replaceable
CERAMIC SANDING WHEEL After processing with HORL ® Diamond Standard, the ceramic sanding disc noticeably improves the sanding result. Only a few movements are needed for this. The result is a smooth, clean and filigree sharp knife edge.
SUPERIOR EFFICIENCY
Industrial diamonds are considered to be one of the most durable and effective abrasives on the market. Monocrystalline diamonds are harder than any knife steel. Using a galvanic process, the diamonds in the HORL ® Diamond Standard are set at approx. 55% in a nickel bed. After the first grinding processes, the initially rough surface becomes finer and HORL® Diamond Standard achieves the ideal sanding surface.
HOR-2QUERCIA -
Horl - 2 WALNUT - sharpener with diamond and ceramic disc - Made in Germany
HORL ® 2 is the latest technological benchmark in the HORL ® family of sharpeners. Two sharpening angles and interchangeable grinding discs ensure greater flexibility. A completely new, play-free rolling sensation is created by the integrated ball bearings. The ceramic coating on the smoothing side guarantees impressive finishing results.
TWO DISCS
DIAMOND ABRASIVE The industrial diamonds used are suitable for effectively sharpening all steel for knives of any degree of hardness without water. When used correctly, the HORL ® Diamond Standard never needs to be replaced. The 46 μm grain size sharpens efficiently and precisely. In a short time, a high-quality sharpening result is achieved. The discs of the HORL ® 2 CRUISE are not replaceable
CERAMIC SANDING WHEEL After processing with HORL ® Diamond Standard, the ceramic sanding disc noticeably improves the sanding result. Only a few movements are needed for this. The result is a smooth, clean and filigree sharp knife edge.
SUPERIOR EFFICIENCY
Industrial diamonds are considered to be one of the most durable and effective abrasives on the market. Monocrystalline diamonds are harder than any knife steel. Using a galvanic process, the diamonds in the HORL ® Diamond Standard are set at approx. 55% in a nickel bed. After the first grinding processes, the initially rough surface becomes finer and HORL® Diamond Standard achieves the ideal sanding surface.
HOR-2NOCE -
Horl - 2 CRUISE - sharpener with diamond and steel disc - Made in Germany
The HORL ® 2 CRUISE incorporates our state of the art development with a focus on the essential. A constant sharpening angle, our durable diamond coating and a beautiful "chalk" color make HORL ® 2 CRUISE an all-round talent for sharpness in any kitchen. The 20 ° sharpening angle produces fast sharpening results and a stable cutting edge with long-lasting sharpening.
TWO DISCS
DIAMOND ABRASIVE The industrial diamonds used are suitable for effectively sharpening all steel for knives of any degree of hardness without water. When used correctly, the HORL ® Diamond Standard never needs to be replaced. The 46 μm grain size sharpens efficiently and precisely. In a short time, a high-quality sharpening result is achieved. The discs of the HORL ® 2 CRUISE are not replaceable
FOR STAINLESS STEEL SANDING After the sharpening process with the diamond disc, the stainless steel sanding disc smoothes the blade and removes any burrs with the help of its integrated grooves. Only a few movements are needed. The discs of the HORL ® 2 CRUISE are not editable
SUPERIOR EFFICIENCY
Industrial diamonds are considered to be one of the most durable and effective abrasives on the market. Monocrystalline diamonds are harder than any knife steel. Using a galvanic process, the diamonds in the HORL ® Diamond Standard are set at approx. 55% in a nickel bed. After the first grinding processes, the initially rough surface becomes finer and HORL® Diamond Standard achieves the ideal sanding surface.
20 ° SHARPENING ANGLE FOR STABLE SHARPNESS
The 20 ° sharpening angle offers a new sharpness in the shortest possible time. The knife also maintains its sharpness for a long time thanks to the stable cutting edge and is suitable for the widest range of cuts in everyday life in the kitchen. Also excellent for sharpening knives for sports and outdoor use.
THE HORL ® S-PAD FOR CONTINUOUS FLEXIBILITY IN GRINDING
The combination of powerful neodymium magnets and the HORL ® S-Pad ensure that the knife is firmly fixed when sharpening. Reinforced by the non-slip effect of the S-Pad, even small blades can be sharpened correctly by adapting them to the desired height.
HOR-2CRUISE -
Horl - premium sharpening set - 3000 and 6000 stones - strop - SET - Made in Germany
Set consisting of two discs of sharpening stones with # 3000 and # 6000 grit and a leather strop to be used at the end to free the blade of all grinding residues and provide the final sharpening.
The set is designed to further refine the result of the sharpening process after using the diamond and ceramic discs, which are standard in HORL ® sharpeners.
The two discs are simply screwed onto the sharpener instead of the stock ones and are intended to refine the edge of the blade of your high-level knives. The stones can be used without water.
Compatible with HORL ® Sharpener 1. Gen, HORL ® 2 and HORL ® 2 PRO.
This item is not compatible with HORL ® 2 CRUISE.
Strop: Measurements: 25 x 5 cm - Thickness: 5mm
HOR-SET -
Horl - strip of cowhide for sharpening - strop - AL-P - Made in Germany
Original HORL ® leather made from vegetable tanned cowhide for a professional finish after sharpening. Thanks to its fine-pored surface, the blade is perfectly freed from even the finest residues on the edge after sharpening on stone.
Measurements: 25 x 5 cm - Thickness: 5mm
HOR-AL-P -
Jaguar - Set knives - 3 pieces vintage 90s knives
Year of production: 1990s
Type of production: industrial
Blade: 440A stainless steel
Country of production: Italy - Maniago
Handle: Rosewood - buffalo horn - deer - with mirror polished brass heads
Blade length: 69mm.
Blade thickness: 2.5mm.
Length closed: 82mm.
Total length: 146mm.
Weight: 70g.
Closure: Back Lock
Sheath:
Note: Jaguar is the trade name under which Maserin produced knives until the 90sJA-SET-3€110.66Out of stock -
Hardcore Hardware Australia - MFK-04 GEN II - Desert - knife
Intended use: Tactical / Military
Type of production: Industrial
Country of production: Australia
Blade: full tang in steel D2 at 58 / 60HRC
Blade treatment: Teflon coating
Handle: G10
Blade length: 130mm.
Blade thickness: 6mm.
Total length: 267mm.
Balancing: Advanced
Weight: 319g.
Sheath: in Kydex, with Tek-Lok attacks
Packaging: cardboard box
Note: -HH-MFK04D€220.49Out of stock -
Hardcore Hardware Australia - MFK-02 GEN II - Desert - knife
Intended use: Tactical / Military
Type of production: Industrial
Country of production: Australia
Blade: full tang in steel D2 at 58 / 60HRC
Blade treatment: Teflon coating
Handle: G10
Blade length: 128mm.
Blade thickness: 6mm.
Total length: 265mm.
Balancing: Advanced
Weight: 347g.
Sheath: in Kydex, with Tek-Lok attacks
Packaging: cardboard box
Note: -HH-MFK02D€220.49Out of stock -
Jaguar - machete handle with deer - Vintage knife
Year of production: 90 Years
Type of production: Industrial
Blade: 440A Stainless steel
Country of production: Italy - Maniago
Handle: Stag
Blade length: 370mm.
Blade Thickness: 4mm.
Overall length: 570mm.
Weight: 994g.
Sheath:
Notes: Jaguar is the brand name under which Maserin produced knives until the 90Ja-fisso€311.48Out of stock -
Jaguar - lockable brass with wooden insert 411 - Knife
Year of production: 90s
Type of production: Industrial
Blade: 440A Stainless steel
Country of production: Italy - Maniago
Handle: brass and wood
Blade length: 48mm.
Blade Thickness: 2.5mm.
Closed Length: 66mm.
Overall length: 110mm.
Weight: 38g.
Lock: Back Lock
Sheath:
Notes: Jaguar is the brand name under which Maserin produced knives until the 90ja-411€22.13Out of stock -
Jaguar - Pocket lockable wooden 710 - Knife
Year of production: 90s
Type of production: Industrial
Blade: 440A Stainless steel
Country of production: Italy - Maniago
Handle: Wood with polished brass heads mirrorBlade length: 40 mm.
Blade Thickness: 2mm.
Closed Length: 57mm.
Overall length: 130mm.
Weight: 32g.
Lock: Back Lock
Sheath:
Notes: Jaguar is the brand name under which Maserin produced knives until the 90ja-710€20.49Out of stock -
Jaguar - Pocket lockable wooden 708 - Knife
Year of production: 90s
Type of production: Industrial
Blade: 440A Stainless steel
Country of production: Italy - Maniago
Handle: Rosewood with polished brass heads mirrorBlade length: 40 mm.
Blade Thickness: 2mm.
Closed Length: 57mm.
Overall length: 130mm.
Weight: 32g.
Lock: Back Lock
Sheath:
Notes: Jaguar is the brand name under which Maserin produced knives until the 90ja-708€20.49Out of stock -
Jaguar - Pocket lockable wooden 709 - knife
Year of production: 90'
Type of production: Industrial
Blade: 440A Stainless steel
Country of production: Italy - Maniago
Handle: Rosewood with heads in Nickel silver polishedBlade length: 40 mm.
Blade Thickness: 2mm.
Closed Length: 57mm.
Overall length: 130mm.
Weight: 34g.
Lock: Back Lock
Sheath:
Notes: Jaguar is the brand name under which Maserin produced knives until the 90'ja-709€20.49Out of stock -
Jaguar - Chiudibile in legno con testine in alpacca - Coltello Vintage Anni '90
Anno di produzione: Anni '90
Tipo di produzione: industriale
Lama: in acciaio inox 440A
Paese di produzione: Italia - Maniago
Manicatura: Legno di palissandro con testine in Alpacca lucidato a specchio
Lunghezza lama: 73mm.
Spessore della lama: 2.5mm.
Lunghezza chiuso: 107mm.
Lunghezza totale: 180mm.
Peso: 72g.
Chiusura: Back Lock
Fodero: In nylon nero, con chiusura in Velcro
Note: Jaguar è il nome commerciale con cui Maserin produceva coltelli fino agli anni '9012572€31.97Only -99 leftOut of stock -
Jaguar - campeggio 522 - coltello
Tipo di produzione: Industriale
Produzione Lama: Italia
Lama: 420
Trattamento Lama: Satinata
Manicatura: legno
Lunghezza lama: 100mm.
Spessore lama: 2.5mm.
Lunghezza totale: 200mm.
Peso: 65g.
Chiusura: back lock
Clip: -
Confezione: -
Note: -jaguar€24.59Out of stock -
Hollywood Collectibles Group - Rambo IV knife - Standard Edition - knife
Intended use: Survival / Collection
Blade: stainless steel
Lama Lama production
Handle: Dark brown leather
Blade length: 290mm.
Blade thickness: 7mm.
Length closed: -
Total length: 460mm.
Balancing: advanced to 4 cm.
Weight: 1.098g.
Closure: -
Clip: -
Sheath: in leather
Notes: Official reproduction with movie license6513N€0.00Only -99 leftOut of stock -
Master Cutlery - Green Hornet - Set Coltelli da Lancio di Kato - MC-GH01 - coltello
Direttamente dal remake cinematografico firmato da Michel Gondry, il set di coltelli da lancio utilizzato da Kato, il fido compagno di Green Hornet (il calabrone verde). Tre pezzi, da esporre su un elegante display laccato nero. Edizione ufficiale (su licenza Columbia Pictures), limitata a 2000 pezzi e numerata progressivamente.
Lama: Acciaio 420
Lunghezza totale: 152 mm.
Larghezza lama: 73 mm.
Spessore lama: 2.5 mm.
Peso: 52 g.
Bilanciatura: centrale
Note: -11029€73.77Out of stock -
Master Cutlery - Predator Machete - knife
Fedele riproduzione del machete utilizzato nel film Predator dal Maggiore Dutch (Arnold Schwarzenegger) e dal resto della sua squadra speciale. Realizzato, su licenza ufficiale, da Master Cutlery per Hollywood Collectibles Group.
Destinazione d'uso: Survival/Collezione
Lama: in acciaio inox 420J2
Produzione Lama Cina
Manicatura: micarta
Lunghezza lama: 370mm.
Spessore della lama: 6mm.
Lunghezza totale: 520mm.
Bilanciatura: -
Peso: 1128g.
Supporto: in legno da applicare al muro
Note: ogni coltello e' accompagnato da un certificato di garanzia e autenticità.
Edizione Standard6514S€143.44Out of stock -
Master Cutlery - Rambo IV - John Rambo Limited Edition - knife
Destinazione d'uso: Survival/Collezione
Lama: in acciaio al carbonio 1060
Produzione Lama Cina
Manicatura: Cuoio nero
Lunghezza lama: 290mm.
Spessore della lama: 7mm.
Lunghezza chiuso: -
Lunghezza totale: 460mm.
Bilanciatura: avanzata a 4 cm.
Peso: 820g.
Chiusura: -
Clip: -
Fodero: in cuoio
Note: edizione a tiratura limitata con firma di "Sylvester Stallone" su lama e fodero.6513€0.00Only -99 leftOut of stock