Knives, collection knife, tactical knives, outdoor knives, pocket knives and tools
-
Horl - 2 PRO - diamond and ceramic disc sharpener - Made in Germany
With HORL ® 2 Pro, Otmar and Timo Horl are making a very personal dream come true. With a high precision internal planetary gear, it triples the grinding motion generated by a simple rolling motion. Therefore, HORL ® 2 Pro sharpens at triple speed. The solid components made of stainless steel and aluminum give it a particularly noble appearance.
TWO DISCS
DIAMOND ABRASIVE The industrial diamonds used are suitable for effectively sharpening all steel for knives of any degree of hardness without water. When used correctly, the HORL ® Diamond Standard never needs to be replaced. The 46 μm grain size sharpens efficiently and precisely. In a short time, a high-quality sharpening result is achieved. The discs of the HORL ® 2 CRUISE are not replaceable
CERAMIC SANDING WHEEL After processing with HORL ® Diamond Standard, the ceramic sanding disc noticeably improves the sanding result. Only a few movements are needed for this. The result is a smooth, clean and filigree sharp knife edge.
SUPERIOR EFFICIENCY
Industrial diamonds are considered to be one of the most durable and effective abrasives on the market. Monocrystalline diamonds are harder than any knife steel. Using a galvanic process, the diamonds in the HORL ® Diamond Standard are set at approx. 55% in a nickel bed. After the first grinding processes, the initially rough surface becomes finer and HORL® Diamond Standard achieves the ideal sanding surface.
HOR-2PRO -
Horl - 2 OAK - sharpener with diamond and ceramic disc - Made in Germany
HORL ® 2 is the latest technological benchmark in the HORL ® family of sharpeners. Two sharpening angles and interchangeable grinding discs ensure greater flexibility. A completely new, play-free rolling sensation is created by the integrated ball bearings. The ceramic coating on the smoothing side guarantees impressive finishing results.
TWO DISCS
DIAMOND ABRASIVE The industrial diamonds used are suitable for effectively sharpening all steel for knives of any degree of hardness without water. When used correctly, the HORL ® Diamond Standard never needs to be replaced. The 46 μm grain size sharpens efficiently and precisely. In a short time, a high-quality sharpening result is achieved. The discs of the HORL ® 2 CRUISE are not replaceable
CERAMIC SANDING WHEEL After processing with HORL ® Diamond Standard, the ceramic sanding disc noticeably improves the sanding result. Only a few movements are needed for this. The result is a smooth, clean and filigree sharp knife edge.
SUPERIOR EFFICIENCY
Industrial diamonds are considered to be one of the most durable and effective abrasives on the market. Monocrystalline diamonds are harder than any knife steel. Using a galvanic process, the diamonds in the HORL ® Diamond Standard are set at approx. 55% in a nickel bed. After the first grinding processes, the initially rough surface becomes finer and HORL® Diamond Standard achieves the ideal sanding surface.
HOR-2QUERCIA -
Horl - 2 WALNUT - sharpener with diamond and ceramic disc - Made in Germany
HORL ® 2 is the latest technological benchmark in the HORL ® family of sharpeners. Two sharpening angles and interchangeable grinding discs ensure greater flexibility. A completely new, play-free rolling sensation is created by the integrated ball bearings. The ceramic coating on the smoothing side guarantees impressive finishing results.
TWO DISCS
DIAMOND ABRASIVE The industrial diamonds used are suitable for effectively sharpening all steel for knives of any degree of hardness without water. When used correctly, the HORL ® Diamond Standard never needs to be replaced. The 46 μm grain size sharpens efficiently and precisely. In a short time, a high-quality sharpening result is achieved. The discs of the HORL ® 2 CRUISE are not replaceable
CERAMIC SANDING WHEEL After processing with HORL ® Diamond Standard, the ceramic sanding disc noticeably improves the sanding result. Only a few movements are needed for this. The result is a smooth, clean and filigree sharp knife edge.
SUPERIOR EFFICIENCY
Industrial diamonds are considered to be one of the most durable and effective abrasives on the market. Monocrystalline diamonds are harder than any knife steel. Using a galvanic process, the diamonds in the HORL ® Diamond Standard are set at approx. 55% in a nickel bed. After the first grinding processes, the initially rough surface becomes finer and HORL® Diamond Standard achieves the ideal sanding surface.
HOR-2NOCE -
Horl - 2 CRUISE - sharpener with diamond and steel disc - Made in Germany
The HORL ® 2 CRUISE incorporates our state of the art development with a focus on the essential. A constant sharpening angle, our durable diamond coating and a beautiful "chalk" color make HORL ® 2 CRUISE an all-round talent for sharpness in any kitchen. The 20 ° sharpening angle produces fast sharpening results and a stable cutting edge with long-lasting sharpening.
TWO DISCS
DIAMOND ABRASIVE The industrial diamonds used are suitable for effectively sharpening all steel for knives of any degree of hardness without water. When used correctly, the HORL ® Diamond Standard never needs to be replaced. The 46 μm grain size sharpens efficiently and precisely. In a short time, a high-quality sharpening result is achieved. The discs of the HORL ® 2 CRUISE are not replaceable
FOR STAINLESS STEEL SANDING After the sharpening process with the diamond disc, the stainless steel sanding disc smoothes the blade and removes any burrs with the help of its integrated grooves. Only a few movements are needed. The discs of the HORL ® 2 CRUISE are not editable
SUPERIOR EFFICIENCY
Industrial diamonds are considered to be one of the most durable and effective abrasives on the market. Monocrystalline diamonds are harder than any knife steel. Using a galvanic process, the diamonds in the HORL ® Diamond Standard are set at approx. 55% in a nickel bed. After the first grinding processes, the initially rough surface becomes finer and HORL® Diamond Standard achieves the ideal sanding surface.
20 ° SHARPENING ANGLE FOR STABLE SHARPNESS
The 20 ° sharpening angle offers a new sharpness in the shortest possible time. The knife also maintains its sharpness for a long time thanks to the stable cutting edge and is suitable for the widest range of cuts in everyday life in the kitchen. Also excellent for sharpening knives for sports and outdoor use.
THE HORL ® S-PAD FOR CONTINUOUS FLEXIBILITY IN GRINDING
The combination of powerful neodymium magnets and the HORL ® S-Pad ensure that the knife is firmly fixed when sharpening. Reinforced by the non-slip effect of the S-Pad, even small blades can be sharpened correctly by adapting them to the desired height.
HOR-2CRUISE -
Horl - premium sharpening set - 3000 and 6000 stones - strop - SET - Made in Germany
Set consisting of two discs of sharpening stones with # 3000 and # 6000 grit and a leather strop to be used at the end to free the blade of all grinding residues and provide the final sharpening.
The set is designed to further refine the result of the sharpening process after using the diamond and ceramic discs, which are standard in HORL ® sharpeners.
The two discs are simply screwed onto the sharpener instead of the stock ones and are intended to refine the edge of the blade of your high-level knives. The stones can be used without water.
Compatible with HORL ® Sharpener 1. Gen, HORL ® 2 and HORL ® 2 PRO.
This item is not compatible with HORL ® 2 CRUISE.
Strop: Measurements: 25 x 5 cm - Thickness: 5mm
HOR-SET -
Horl - strip of cowhide for sharpening - strop - AL-P - Made in Germany
Original HORL ® leather made from vegetable tanned cowhide for a professional finish after sharpening. Thanks to its fine-pored surface, the blade is perfectly freed from even the finest residues on the edge after sharpening on stone.
Measurements: 25 x 5 cm - Thickness: 5mm
HOR-AL-P -
Mission - MPK10-Ti Half Serrated - Coltello
Destinazione d'uso: Tattico/Sub
Tipo di Produzione: industriale
Lama: in Titanio Beta con finitura micropallinata
Produzione Lama USA
Manicatura: Hytrel
Lunghezza lama: 140mm.
Spessore della lama: 6.3mm.
Lunghezza totale: 267mm.
Bilanciatura: -
Peso: 240g.
Chiusura: -
Clip: -
Fodero: in Hytrel
Confezione: scatola di cartone con loghi Mission
Note: -10857€409.02Only -99 leftOut of stock -
Hollywood Collectibles Group - Rambo IV knife - Standard Edition - knife
Intended use: Survival / Collection
Blade: stainless steel
Lama Lama production
Handle: Dark brown leather
Blade length: 290mm.
Blade thickness: 7mm.
Length closed: -
Total length: 460mm.
Balancing: advanced to 4 cm.
Weight: 1.098g.
Closure: -
Clip: -
Sheath: in leather
Notes: Official reproduction with movie license6513N€0.00Only -99 leftOut of stock -
Master Cutlery - Green Hornet - Set Coltelli da Lancio di Kato - MC-GH01 - coltello
Direttamente dal remake cinematografico firmato da Michel Gondry, il set di coltelli da lancio utilizzato da Kato, il fido compagno di Green Hornet (il calabrone verde). Tre pezzi, da esporre su un elegante display laccato nero. Edizione ufficiale (su licenza Columbia Pictures), limitata a 2000 pezzi e numerata progressivamente.
Lama: Acciaio 420
Lunghezza totale: 152 mm.
Larghezza lama: 73 mm.
Spessore lama: 2.5 mm.
Peso: 52 g.
Bilanciatura: centrale
Note: -11029€73.77Out of stock -
Francesco Pachì - L'arte Nel Coltello - Libro
Editore: Saviolo
Pubblicazione: 12/2007
Pagine: 167
EAN: 9788895125084
Uno splendido libro fotografico ed al tempo stesso guida,dove trovano spazio le stupende immagini di oltre 100 coltellinai Italiani ed esteri,collezionisti, coltellerie e fornitori di materiali, con indirizzi e dati tecnici.
Formato orizzontale con dimensioni di 21 per 30 cm, copertina rigida e custodia stampata,plastificazione, verniciatura anti UV, ed un numero di 167 pagine in lingua italiana ed inglese con stampa di altissima qualità per una tiratura limitata di 1500 copie.L-PACHI€28.69Out of stock -
Master Cutlery - Predator Machete - knife
Fedele riproduzione del machete utilizzato nel film Predator dal Maggiore Dutch (Arnold Schwarzenegger) e dal resto della sua squadra speciale. Realizzato, su licenza ufficiale, da Master Cutlery per Hollywood Collectibles Group.
Destinazione d'uso: Survival/Collezione
Lama: in acciaio inox 420J2
Produzione Lama Cina
Manicatura: micarta
Lunghezza lama: 370mm.
Spessore della lama: 6mm.
Lunghezza totale: 520mm.
Bilanciatura: -
Peso: 1128g.
Supporto: in legno da applicare al muro
Note: ogni coltello e' accompagnato da un certificato di garanzia e autenticità.
Edizione Standard6514S€143.44Out of stock -
Master Cutlery - Rambo IV - John Rambo Limited Edition - knife
Destinazione d'uso: Survival/Collezione
Lama: in acciaio al carbonio 1060
Produzione Lama Cina
Manicatura: Cuoio nero
Lunghezza lama: 290mm.
Spessore della lama: 7mm.
Lunghezza chiuso: -
Lunghezza totale: 460mm.
Bilanciatura: avanzata a 4 cm.
Peso: 820g.
Chiusura: -
Clip: -
Fodero: in cuoio
Note: edizione a tiratura limitata con firma di "Sylvester Stallone" su lama e fodero.6513€0.00Only -99 leftOut of stock -
Mission - MPU-Ti Paracord coltello
Destinazione d'uso: Tattico / Sportivo
Tipo di produzione: Semi-Industriale
Produzione Lama: USA
Lama: In titanio beta
Trattamento Lama: -
Manicatura: in Paracord
Lunghezza lama: 75mm.
Spessore lama: 4mm.
Lunghezza chiuso: -
Lunghezza totale: 178mm.
Spessore da chiuso: -
Bilanciatura: -
Peso: 78g.
Chiusura: -
Clip: -
Fodero: in Cordura
Confezione: scatola in cartone con loghi Mission Knives
Note: -5821€162.30Out of stock -
Mission - MPU7-TI - coltello
ATTENZIONE: DISPONIBILE SOLO CON FILO SEGHETTATO
Mission Knives and Tool è una piccola compagnia americana nata con lo scopo di proporre sul mercato coltelli non tanto famosi per il loro design ricercato quanto per gli innovativi materiali utilizzati.
I loro prodotti sono subito risultati estremamente resistenti tanto da meritare un U.S. Government National Stock Number (NSN 1386-01-417-1263)per il coltello MPK12-Ti e destare l'immediato interesse di reparti speciali militari quali SEAL, SWAT,USMC, USAF, US Coast Guard, FBI e Bomb squads che ne hanno immediatamente richiesto una dotazione.
Vincente è risultato l'utilizzo di Titanio-Beta per le lame che offre vantaggi innegabili rispetto all'acciaio: completa resistenza a ruggine e a corrosione, leggerezza del 40%, totale amagneticità, superiore duttilità, maggiordurezza e flessibilità, biologicamente inerte. Ottima anche la scelta delle manicature in Hytrel caricato con Kevlar che conferiscono leggerezza, ergonomicità e resistenza agli acidi ed alle altissime temperature. Esistono ancheversioni più economiche in acciaio A2 con elevate capacità di taglio e resistenza.
L'MPU è stato realizzato inizialmente per i reparti speciali e per le forze SWAT che avevano necessità di un coltello piccolo, di backup, da legare all'avambraccio o da utilizzare in uno stivale.
Destinazione d'uso: Tattico/Militare/Sub
Lama: full tang in Titanio Beta 45HRC antiriflesso
Manicatura: -
Lunghezza lama: 77mm.
Spessore della lama: 4mm.
Lunghezza chiuso: -
Lunghezza totale: 180mm.
Bilanciatura: arretrata a 2.5 cm dal ramo di guardia inferiore
Peso: 60g.
Chiusura: -
Clip: -
Fodero: in kydex con agganci Tek-Lok
Note: amagnetico, 40% più leggero dell'acciaio, immune alla corrosione. L'Hytrel è resistente al calore, agliacidi e non conduce elettricità5704€245.08Out of stock -
Mission - MTK-Ti Paracord coltello
Destinazione d'uso: Tattico / Sportivo
Tipo di produzione: Semi-Industriale
Produzione Lama: USA
Lama: In titanio beta
Trattamento Lama: -
Manicatura: in Paracord
Lunghezza lama: 135mm.
Spessore lama: 6mm.
Lunghezza chiuso: -
Lunghezza totale: 255mm.
Spessore da chiuso: -
Bilanciatura: -
Peso: 198g.
Chiusura: -
Clip: -
Fodero: in Hytrel e Kevlar
Confezione: scatola in cartone con loghi Mission Knives
Note: -5820€266.39Out of stock