Knives, collection knife, tactical knives, outdoor knives, pocket knives and tools
-
Spartan Blades - Talos Liner Lock knife - Black - Harsey Design - SFBL7BK - kitchen knife
The TALOS Folder is a lightweight folding knife with a liner lock, designed by our friend and collaborator William W. Harsey Jr. Its slim and lightweight design makes it the perfect companion for everyday carry and daily tasks. Despite its small size, thanks to its thoughtful design, high-quality CTS-XHP blade, and deep pocket clip, it handles most daily tasks with ease. Whether you're wading through a trout-rich stream or on your way to work, this little knife is ideal.
All our Bronze (Field) grade folding knives incorporate our new "Oil Infused Bronze Bearing System" or "OIBBS". Our sintered bronze bearings are oil-infused, thus reducing friction on the blade, giving you a tight but smooth blade opening. This system is particularly useful for slow speeds, intermittent use, and irregular loads like those found on folding knives.
Intended use: Collection / Sports
Type of production: MidTech
Country of production: Taiwan
Blade: in CTS-XHP steel
Blade treatment: stone wash
Handle: G-10
Blade length: 80mm.
Blade thickness: 3.2mm.
Closed length: 100mm
Total length: 183mm.
Weight: 66g.
Closure: Liner Lock
Clip: in steel
Packaging: cardboard box with Spartan Blades logos
Notes: Design by William HarseySFBL7BK -
Spartan Blades - Poros knife - G10 Green - 154CM - SFL11GR - knife
The POROS flipper was designed by Curtis Iovito as a robust and large-sized flipper. The high grind lines of this blade, combined with a sharp and penetrating tip, make it a reliable companion for everyday carry.
Its quick flipper action is assisted by IKBS bearings for that "Snap" you're looking for! Its distinctive scallops are not only beautiful to look at but also ensure a secure grip. The deep pocket clip maintains a low profile while keeping your blade ready for use when needed. The blade is made of 154CM stainless steel with a black titanium nitride coating; the SS hardware and liner have a black electroplated powder coating.
Intended use: Sports
Type of production: Industrial
Country of production: Taiwan
Blade: in 154CM stainless steel 58/60 HRC
Blade treatment: Black Titanium Nitride Coating
Handle: OD Green G10
Blade length: 89mm.
Blade thickness: 4mm.
Closed length: 97mm
Total length: 230mm.
Weight: 147g.
Closure: Liner Lock
Clip: in stainless steel, removable and reversible
Packaging: cardboard box with Spartan Blades logos. Design: Curtis Iovito
Notes: The Field Grade series with Bronze-colored box identifies the Asian production of Spartan Blades entrusted to Pineland Cutlery (a company formed by Spartan Blades and Ka-Bar). In this series, you can find the most iconic designs of Spartan Blades offered at very aggressive and competitive prices.SFL11GR -
Spartan Blades - Astor by Les George - Carbon FIber & CTS-XHP - SFBL8CF - knife
The ASTOR is our first folding knife in collaboration with prolific knife maker Les George, winner of Blade Show 2021 as "Imported Knife of the Year."
The ASTOR was built as a sturdy working knife! With its sturdy G-10 grips, thick liner-lock and high-strength CTS-XHP steel blade, the ASTOR is the perfect knife for those jobs that require a little extra toughness.
All of our Bronze Field Grade productions incorporate our new "Oil Infused Bronze Bushing System" or "OIBBS"! Our sintered bronze bushings are impregnated with oil, which reduces friction on the blade, thus ensuring that the blade opens smoothly, even when firmly held. This system is especially useful for low speeds, intermittent use and irregular loads such as those found on folding knives.
Intended Use: Sporting
Production type: Industrial
Country of manufacture: Taiwan
Blade: CTS-XHP 58/60 HRC stainless steel
Blade treatment: Stonewashed
Handle: Composite made of G10 and Carbon Fiber
Blade Length: 89mm.
Blade thickness: 4mm.
Length closed: 118mm.
Total length: 209mm.
Weight: 145g.
Closure: Liner Lock
Clip: stainless steel, removable and reversible
Packaging: cardboard box with Spartan Blades logos
Notes: The Field Grade series with Bronze-colored box, identifies the Asian production of Spartan Blades entrusted to Pineland Cutlery (a company formed by Spartan Blades and Ka-Bar). In this series one can find the most iconic designs of Spartan Blades offered at very aggressive and competitive prices.SFBL8CF -
Spartan Blades - Astor by Les George - Green G10 & CTS-XHP - SFBL8GR - knife
The ASTOR is our first folding knife in collaboration with prolific knife maker Les George, winner of Blade Show 2021 as "Imported Knife of the Year."
The ASTOR was built as a sturdy working knife! With its sturdy G-10 grips, thick liner-lock and high-strength CTS-XHP steel blade, the ASTOR is the perfect knife for those jobs that require a little extra toughness.
All of our Bronze Field Grade productions incorporate our new "Oil Infused Bronze Bushing System" or "OIBBS"! Our sintered bronze bushings are impregnated with oil, which reduces friction on the blade, thus ensuring that the blade opens smoothly, even when firmly held. This system is especially useful for low speeds, intermittent use and irregular loads such as those found on folding knives.
Intended Use: Sporting
Production type: Industrial
Country of manufacture: Taiwan
Blade: CTS-XHP 58/60 HRC stainless steel
Blade treatment: Stonewashed
Handle: G10
Blade length: 89mm.
Blade thickness: 4mm.
Length closed: 118mm.
Total length: 209mm.
Weight: 145g.
Closure: Liner Lock
Clip: stainless steel, removable and reversible
Packaging: cardboard box with Spartan Blades logos
Notes: The Field Grade series with Bronze-colored box, identifies the Asian production of Spartan Blades entrusted to Pineland Cutlery (a company formed by Spartan Blades and Ka-Bar). In this series one can find the most iconic designs of Spartan Blades offered at very aggressive and competitive prices.SFBL8GR -
Spartan Blades - Talos Liner Lock knife - Green - Harsey Design - SFBL7GR - kitchen knife
The TALOS Folder is a lightweight folding knife with a liner lock, designed by our friend and collaborator William W. Harsey Jr. Its slim and lightweight design makes it the perfect companion for everyday carry and daily tasks. Despite its small size, thanks to its thoughtful design, high-quality CTS-XHP blade, and deep pocket clip, it handles most daily tasks with ease. Whether you're wading through a trout-rich stream or on your way to work, this little knife is ideal.
All our Bronze (Field) grade folding knives incorporate our new "Oil Infused Bronze Bearing System" or "OIBBS". Our sintered bronze bearings are oil-infused, thus reducing friction on the blade, giving you a tight but smooth blade opening. This system is particularly useful for slow speeds, intermittent use, and irregular loads like those found on folding knives.
Intended use: Collection / Sports
Type of production: MidTech
Country of production: Taiwan
Blade: in CTS-XHP steel
Blade treatment: stone wash
Handle: G-10
Blade length: 80mm.
Blade thickness: 3.2mm.
Closed length: 100mm
Total length: 183mm.
Weight: 66g.
Closure: Liner Lock
Clip: in steel
Packaging: cardboard box with Spartan Blades logos
Notes: Design by William HarseySFBL7GR -
Spartan Blades - Ronin Shoto Folder Karambit - CTS-XHP - SFBL9BK - knife
The Spartan-Ronin Shōtō is a folding karambit knife with a liner lock. This blade is the result of a collaborative effort between Spartan Blades and TU Lam of Ronin Tactics, our former Special Forces colleague and dear friend.
Having worked throughout Asia and in Indonesia, both Tu Lam and Spartan hold a great respect for the Karambit style. This blade was designed to be incorporated into various martial arts systems.
It features a blade made of CTS-XHP, "Emerson Wave" function for easy opening, and a reversible pocket clip for left-hand carry; the black and red G10 grips ensure a secure grip. Please check this link to Ronin Tactics HERE.
All our Bronze (Field) grade folding knives incorporate our new "Oil Infused Bronze Bearing System" or “OIBBS”. Our sintered bronze bearings are oil-impregnated, thereby reducing friction on the blade, offering you a tight but smooth blade opening.
Intended use: Collection / Sports
Type of production: Industrial
Country of production: Taiwan
Blade: in stainless steel CTS-XHP
Blade treatment: Satin Black Ti/Nitride Finish
Handle: G10
Blade length: 75mm.
Blade thickness: 3.2mm.
Closed length: 135mm
Total length: 200mm.
Weight: 179g.
Lock: Liner Lock
Clip: in steel
Packaging: cardboard box with Spartan Blades logos
Notes: The Field Grade series with Bronze-colored box, identifies the Asian production of Spartan Blades entrusted to Pineland Cutlery (a company formed by Spartan Blades and Ka-Bar). In this series one can find the most iconic designs of Spartan Blades offered at very aggressive and competitive prices.SFBL9BK -
Spartan Blades - Harsey Folder - 3.25" Chad Nichols Damascus Blue Anodization - knife
This is the latest knife produced in terms of time by Spartan Blades in collaboration with legendary knife maker William "Bill" Harsey Jr.
The SHF 3.25 is the knife many of you have been waiting for! A reliable 6AL4V titanium frame-lock pocket knife with a handcrafted 3.25" damascus steel blade made by Chad Nichols. Easy to carry and comfortable in the hand, this is a truly exceptional knife. Constructed like its award-winning big brother the SHF 3.25 is made entirely of 6AL-4V titanium, except for the pivot, blade and arbor.
This medium-sized folding knife features a reversible pocket clip and two thumb studs that allow it to be carried in either the right or left hand. If you are looking for a high-quality, well-designed folding knife, this is one you should consider!
Intended Use: Collector/Sportsman
Type of manufacture: MidTech
Country of manufacture: USA
Blade: handcrafted stainless damascus steel, by Chad Nichols
Blade treatment: -
Handle: titanium 6AL4V
Blade length: 82.5mm.
Blade thickness: 3.2mm.
Length closed: 98.5mm.
Total length: 181mm.
Weight: 82g.
Closure: FrameLock
Clip: anodized titanium
Packaging: cardboard box with Spartan Blades logos
Notes: Design by William HarseySF10CNBL -
Mcusta - Bamboo knife brown pakka wood - SPG2 Powder Steel - MC-0145G - knife
Collini Cutlery is the official distributor for Italy of MCUSTA Japanese knives
Intended use: sports / collection
Type of production: industrial cutting - handcrafted assembly and finishing
Blade: SPG2 61 / 62HRC
Blade treatment: -
Production Lama: Japan
Handle: Damascus steel and pakka wood
Blade length: 70mm.
Blade thickness: 3mm.
Closed length: 96mm.
Total length: 166mm.
Balancing: -
Weight: 96g.
Closure: Liner Lock
Clip: -
Sheath: cordura
Note: -MC-0145G -
Mcusta - Take knife VG10 Damascus - Shinra Series - Stamina Wood - MC-0075D - knife
Collini Cutlery is the official distributor of MCUSTA Japanese knives for Italy
Intended use: sports / collection / gentlemen
Type of production: industrial cutting - craft assembly and finishing
Blade: in SanMai steel with VG-10 stainless steel cutting edge at 59 / 60HRC and outer cheeks in 33-layer nickel damask
Production Lama: Japan
Handle: Stamina Wood
Blade length: 65mm.
Blade thickness: 3mm.
Length closed: 95mm.
Total length: 164mm.
Balancing: -
Weight: 58g.
Closure: Liner Lock
Clip: -
Sheath: in fabric
Note: -MC-0075D -
Mcusta - Tsuchi Damascus knife - Shinra Stamina Wood - MC-0078D - knife
Collini Cutlery is the official distributor of MCUSTA Japanese knives for Italy
Intended use: sports / collection
Type of production: industrial cutting - craft assembly and finishing
Blade: in SanMai steel with VG-10 stainless steel cutting edge at 59 / 60HRC and outer cheeks in 33-layer nickel damask
Production Lama: Japan
Handle: Stamina Wood
Blade length: 70mm.
Blade thickness: 3mm.
Length closed: 95mm.
Total length: 167mm.
Balancing: -
Weight: 66g.
Closure: Liner Lock
Clip: -
Sheath: fabric bag
Note: -MC-0078D -
Mcusta - Katana knife series - MC-0044C - Black / Green - knife
Mcusta - Series Katana - MC-0041C - knife
Intended use: sports / collection
Type of production: industrial cutting - assembly and handcrafted finishes
Production Lama: Japan
Blade: laminated steel with sharp VG-10 to 59/60 HRC
Handle: Aluminum
Blade length: 80mm.
Blade thickness: 3mm.
Closed Length: 110mm.
Overall length: 194mm.
Thick when closed: 14mm.
Weight: 96g.
Lock: Liner Lock
Clip: Stainless Steel
Packaging: cardboard box with logos Mcusta
Notes: -MC-0044C -
Mcusta - Katana knife series - MC-0042C - Blue / Orange - knife
Mcusta - Series Katana - MC-0041C - knife
Intended use: sports / collection
Type of production: industrial cutting - assembly and handcrafted finishes
Production Lama: Japan
Blade: laminated steel with VG-10 edge hardened to 59/60 HRC
Handle: Aluminum
Blade length: 80mm.
Blade thickness: 3mm.
Closed Length: 110mm.
Overall length: 194mm.
Thick when closed: 14mm.
Weight: 96g.
Lock: Liner Lock
Clip: Stainless Steel
Packaging: cardboard box with logos Mcusta
Notes: -MC-0042C -
Mcusta - Masamune Dates MC-0186D knife - VG10 Damascus SanMai - Sengoku Series - knife
Collini Cutlery is the official distributor of MCUSTA Japanese knives for Italy
Intended use: sports / collection
Type of production: industrial cutting - craft assembly and finishing
Production Lama: Japan
Blade: in SanMai steel with VG-10 stainless steel cutting edge at 59 / 60HRC and outer cheeks in 33-layer nickel damask
Handle: Micarta
Blade length: 93mm.
Blade thickness: 3mm.
Length closed: 117mm.
Total length: 210mm.
Thick when closed: 17.5mm.
Weight: 120g.
Closure: Liner Lock
Clip: in stainless steel
Packaging: cardboard box with Mcusta logos
Notes: -MC-0186D -
Mcusta - MC-0191C Slip Joint Knife Black / Red Wood - knife
Destination of use: sport / collection
Type of production: industrial cutting - assembly and artisan finishes
Lama production: Japan
Blade: in laminated stainless steel damascus with cutting edge in VG-10 at 59 / 60HRC
Handle: wood
Blade length: 85mm.
Blade thickness: 3mm.
Length closed: 110mm.
Total length: 195mm.
Thick when closed: 12mm.
Weight: 78g.
Closure: Joint Slip
Clip: -
Packaging: cardboard box with Mcusta logos with fabric sheath
Note: -MC-0191C -
Mcusta - MC-193C Slip Joint Knife Black / Green - knife
Collini Cutlery is the official distributor for Italy of MCUSTA Japanese knives
Destination of use: sport / collection
Type of production: industrial cutting - assembly and artisan finishes
Lama production: Japan
Blade: in laminated stainless steel damascus with cutting edge in VG-10 at 59 / 60HRC
Handle: wood
Blade length: 85mm.
Blade thickness: 3mm.
Length closed: 110mm.
Total length: 195mm.
Thick when closed: 12mm.
Weight: 78g.
Closure: Joint Slip
Clip: -
Packaging: cardboard box with Mcusta logos with fabric sheath
Note: -MC-193C -
Mcusta - Rikyu Tea Ceremony Damascus - MC-0184D - knife
Cutlery Collini is the official distributor for Italy of Japanese knives Mcusta
Intended use: sports / collection
Type of production: industrial cutting - assembly and handcrafted finishes
Production Lama: Japan
Blade: Stainless sanmai with sharp steel VG-10 to 59/60 HRC and cheeks outside Damascus nickel to 33 layers
Handle: Micarta
Blade length: 93mm.
Blade thickness: 3mm.
Closed Length: 117mm.
Overall length: 210mm.
Thick when closed: 17.5mm.
Weight: 120g.
Lock: Liner Lock
Clip: Stainless Steel
Packaging: cardboard box with logos Mcusta
Note: Cordura sheath and leather12016 -
Mcusta - Nami Small Damascus Japan - MC-0111D - knife
Mcusta - Nami Small Damascus Japan - MC-0111D - knife
Collini Cutlery is the official distributor for Italy of Japanese knives Mcusta
Intended Use: Sport / collection
Type of production: industrial cutting - assembly and handcrafted finishes
Blade: Stainless steel sanmai with sharp VG-10 to 59/60HRC cheeks and external nickel damascus 33 layers
Blade Production: Japan
Handle: steel hammered
Blade length: 65mm.
Blade Thickness: 3mm.
Closed Length: 95mm.
Overall length: 160mm.
Balancing: -
Weight: 74g.
Lock: Liner Lock
Clip: -
Sheath: -
Notes: -MC-0111D -
Mcusta - Take VG10 Damascus - Shinra Series - Black PakkaWood - MC-0076DP - knife
Intended use: sport / collection / gentlemen
Type of production: industrial cutting - craft assembly and finishing
Blade: in SanMai steel with VG-10 stainless steel cutting edge at 59 / 60HRC and outer cheeks in 33-layer nickel damask
Production Lama: Japan
Handle: Pakkawood wood, worked bamboo style
Blade length: 65mm.
Blade thickness: 3mm.
Length closed: 95mm.
Total length: 164mm.
Balancing: -
Weight: 58g.
Closure: Liner Lock
Clip: -
Sheath: in fabric
Note: -MC-0076DP -
Mcusta - Shadow - MC-114BD - knife
Intended use: sports / collection
Type of production: industrial cutting - craft assembly and finishing
Production Lama: Japan
Blade: in damask laminated and hammered stainless steel with cutting edge in VG-10 at 59 / 60HRC
Handle: Stainless Steel
Blade length: 85mm.
Blade thickness: 3mm.
Length closed: 112mm.
Total length: 192mm.
Thick when closed: 8mm.
Weight: 114g.
Closure: Frame Lock
Clip: in stainless steel
Packaging: cardboard box with Mcusta logos
Note: -MC-0114BD -
Mcusta - Elite Tactility Micarta knife VG10 - MC-00121 knife
Collini Cutlery is the official distributor of MCUSTA Japanese knives for Italy
Intended use: sports / collection
Type of production: industrial cutting - craft assembly and finishing
Production Lama: Japan
Blade: VG-10 stainless steel at 59 / 60HRC
Handle: Micarta
Blade length: 95mm.
Blade thickness: 3mm.
Length closed: 115mm.
Total length: 207mm.
Thick when closed: 17.5mm.
Weight: 100g.
Closure: Liner Lock
Clip: in stainless steel
Packaging: cardboard box with Mcusta logos
Note: -MC-00121 -
Mcusta - Yoroi Damasco - 37D - knife
Intended Use: sporivo / collection
Type of production: industrial cutting - assembly and handcrafted finishes
Blade: Stainless steel sanmai with sharp VG-10 59/60HRC cheeks and stainless steel external
Treatment Lama: -
Blade Production: Japan
Handle: damascus steel
Blade length: 70mm.
Blade Thickness: 3mm.
Closed Length: 90mm.
Total length: 162mm.
Balance: -
Weight: 86g.
Lock: Liner Lock
Clip: -
Sheath: -
Notes: -3984 -
Spartan Blades - Harsey Folder - 3.25" Chad Nichols Damascus Bronze Anodization - knife
This is the latest knife produced in terms of time by Spartan Blades in collaboration with legendary knife maker William "Bill" Harsey Jr.
The SHF 3.25 is the knife many of you have been waiting for! A reliable 6AL4V titanium frame-lock pocket knife with a handcrafted 3.25" damascus steel blade made by Chad Nichols. Easy to carry and comfortable in the hand, this is a truly exceptional knife. Constructed like its award-winning big brother the SHF 3.25 is made entirely of 6AL-4V titanium, except for the pivot, blade and arbor.
This medium-sized folding knife features a reversible pocket clip and two thumb studs that allow it to be carried in either the right or left hand. If you are looking for a high-quality, well-designed folding knife, this is one you should consider!
Intended Use: Collector/Sportsman
Type of manufacture: MidTech
Country of manufacture: USA
Blade: handcrafted stainless damascus steel, by Chad Nichols
Blade treatment: -
Handle: titanium 6AL4V
Blade length: 82.5mm.
Blade thickness: 3.2mm.
Length closed: 98.5mm.
Total length: 181mm.
Weight: 82g.
Closure: FrameLock
Clip: anodized titanium
Packaging: cardboard box with Spartan Blades logos
Notes: Design by William HarseySF10DMBZ -
Mcusta - Platinum Label Blade Show 2022 Limited Edition - MCPLBS-22 - knife
Extremely limited edition Platinum Label series folding knife with Mokume damascus blade and heads produced in only 20 examples each with a different coloration of the wood briar. Each specimen is therefore unique and differs from the previous one.
Intended use: collectionType of production: industrial cutting - craftsmanship, assembly and finishing
Country of production: Seki - Japan
Blade: made of Mokume stainless steel with VG-10 cutting edge, forged with rainbow damascus rolling, achieved through layers of stainless steel, copper and brass and hammered through Tsuchime technique
Handle: made of Mokume stainless damask steel and wood briar
Blade length: 80mm.
Blade thickness: 3mm.
Length closed: 110mm.
Total length: 195mm.
Thickness when closed: 14mm.
Weight: 208g.
Closure: Liner Lock
Clip: handcrafted, removable and reversible, hammered stainless steel
Packaging: wooden box with Mcusta logos
Notes: Special and Limited Edition made in only 20 pieces for the Blade Show in Atlanta 2022MC-PLBS22 -
Mcusta - Shinari Shinra Maxima knife - SPG2 - PRIVATE COLLECTION - Green Pakka Wood - MC-0203G - knife
Knife withdrawn from a private collection in excellent condition, uniquely has a small imperfection on the wood at the base of the handle (visible in the close up of the photos) - Complete with original box - Checked and certified by our in-house Coltelleria Collini laboratory.
The SHINRA MAXIMA series uses the sintered and cryogenically hardened Japanese steel SPG2 in 3-layer laminate, one of the best ever produced in Japan
Intended use: sports / collection
Type of production: industrial cutting - handcrafted assembly and finishing
Production Lama: Japan
Blade: 61 / 62HRC SPG-2 stainless steel in three-layer San Mai laminate
Handle: Pakka Wood
Blade length: 95mm.
Blade thickness: 3mm.
Closed length: 115mm.
Total length: 207mm.
Thick when closed: 17.5mm.
Weight: 100g.
Closure: Liner Lock
Clip: in stainless steel
Packaging: cardboard box with Mcusta logos
Note: -For more information on the steel used, you can visit the website: www.collinisteel.com
AP-MC-0203G -
Mcusta - Petit Damascus knife - VG10 steel - Micarta Blue and Black - MC-0212D - knife
Coltelleria Collini is the official distributor for Italy of MCUSTA Japanese knives
Intended use: sports / collection
Type of production: industrial cutting - handcrafted assembly and finishing
Blade: SanMai steel with VG-10 stainless steel edge at 59 / 60HRC and external cheeks in 33-layer nickel damascus
Production Lama: Japan
Handle: Micarta
Blade length: 45mm.
Blade thickness: 3mm.
Closed length: 70mm.
Total length: 118mm.
Balancing: -
Weight: 44g.
Closure: Liner Lock
Clip: in deep pocket steel
Sheath:
Note: -MC-0212D -
Mcusta - Petit Damascus knife - VG10 steel - Micarta Orange and Black - MC-0211D - knife
Coltelleria Collini is the official distributor for Italy of MCUSTA Japanese knives
Intended use: sports / collection
Type of production: industrial cutting - handcrafted assembly and finishing
Blade: SanMai steel with VG-10 stainless steel edge at 59 / 60HRC and external cheeks in 33-layer nickel damascus
Production Lama: Japan
Handle: Micarta
Blade length: 45mm.
Blade thickness: 3mm.
Closed length: 70mm.
Total length: 118mm.
Balancing: -
Weight: 44g.
Closure: Liner Lock
Clip: in deep pocket steel
Sheath:
Note: -MC-0211D -
Mcusta - Yatagarasu collection knife - Limited Edition - MCSY-001 - knife
Extremely limited edition Yatagarasu MCUSTA folding knife of the Shinwa series, with Mokume blade and produced in only 100 pieces.
Yatagarasu, in Japanese culture, is a three-legged crow symbol of driving owned by the Sun goddess Amaterasu. Yatagarasu appears in ancient Japanese documents, such as Kojiki (古 事 記), in which it is also said that he fought and killed a beast intending to devour the Sun, and that he is also the protector of the emperor Jimmu.
On many occasions, in Japanese art this creature is represented with three legs, although in Kojiki it is never said that the Yatagarasu has more than two. Today, the three-legged version of the Yatagarasu is used as a symbol of the football federation of Japan.Intended use: collection
Type of production: industrial cutting - craftsmanship, assembly and finishes
Lama production: Japan
Blade: stainless steel Mokume Damascus - Aogami (blue steel) forged with lamination of rainbow Damascus, obtained thanks to layers of stainless steel, copper and brass and with black hammering through the Tsuchime technique
Handle: in stainless damask with dark purple corian insert and copper and gold inlays
Blade length: 80mm.
Blade thickness: 3mm.
Length closed: 110mm.
Total length: 195mm.
Thick when closed: 14mm.
Weight: 141g.
Closure: Liner Lock
Clip: -
Packaging: wooden box with Mcusta logos
Notes: limited edition 100 piecesFor more information on the steel used you can view the site: www.collinisteel.com
MCSY-001 -
Mcusta - Takeri Shinra Maxima knife - SPG2 Powder Steel - Damascius - MC-0202G - knife
Collini Cutlery is the official distributor for Italy of the Japanese MCUSTA knives
The SHINRA MAXIMA series uses Japanese sintered and cryogenically hardened SPG2 in 3-layer laminate, one of the best ever produced in Japan
Intended use: sports / collection
Type of production: industrial cut - assembly and handmade finishes
Lama production: Japan
Blade: 61 / 62HRC SPG-2 stainless steel in three-layer San Mai laminate
Handle: Damascus
Blade length: 90mm.
Blade thickness: 3mm.
Length closed: 117mm.
Total length: 211mm.
Thick when closed: 17.5mm.
Weight: 170g.
Closure: Liner Lock
Clip: stainless steel
Packaging: cardboard box with Mcusta logos
Note: -For more information on the steel used you can view the site: www.collinisteel.com
MC-0202G -
Mcusta - Shinari Shinra Maxima knife - SPG2 Powder Steel - Green Pakka Wood - MC-0203G - knife
Collini Cutlery is the official distributor for Italy of the Japanese MCUSTA knives
The SHINRA MAXIMA series uses Japanese sintered and cryogenically hardened SPG2 in 3-layer laminate, one of the best ever produced in Japan
Intended use: sports / collection
Type of production: industrial cut - assembly and handmade finishes
Lama production: Japan
Blade: 61 / 62HRC SPG-2 stainless steel in three-layer San Mai laminate
Handle: Pakka wood
Blade length: 95mm.
Blade thickness: 3mm.
Length closed: 115mm.
Total length: 207mm.
Thick when closed: 17.5mm.
Weight: 100g
Closure: Liner Lock
Clip: stainless steel
Packaging: cardboard box with Mcusta logos
Note: -For more information on the steel used you can view the site: www.collinisteel.com
MC-0203G -
Mcusta - Minagi Shinra Maxima knife - SPG2 Powder Steel - Blue Micarta - MC-0201G - knife
Collini Cutlery is the official distributor for Italy of the Japanese MCUSTA knives
The SHINRA MAXIMA series uses Japanese sintered and cryogenically hardened SPG2 in 3-layer laminate, one of the best ever produced in Japan
Intended use: sports / collection
Type of production: industrial cut - assembly and handmade finishes
Lama production: Japan
Blade: 61 / 62HRC SPG-2 stainless steel in three-layer San Mai laminate
Handle: Micarta
Blade length: 90mm.
Blade thickness: 3mm.
Length closed: 117mm.
Total length: 211mm.
Thick when closed: 17.5mm.
Weight: 105g.
Closure: Liner Lock
Clip: stainless steel
Packaging: cardboard box with Mcusta logos
Note: -For more information on the steel used you can view the site: www.collinisteel.com
MC-0201G -
Mcusta - Bamboo knife black pakka wood - SPG2 Powder Steel - MC-0146G - knife
Collini Cutlery is the official distributor for Italy of the Japanese MCUSTA knives
Intended use: dirty / collection
Type of production: industrial cut - assembly and handmade finishes
Blade: SPG2 61 / 62HRC
Blade treatment: -
Lama production: Japan
Handle: damask steel and pakka wood
Blade length: 70mm.
Blade thickness: 3mm.
Length closed: 96mm.
Total length: 166mm.
Balancing: -
Weight: 96g.
Closure: Liner Lock
Clip: -
Sheath: cordura
Note: -MC-0146G -
Mcusta - Tsuchi Damascus knife - Shinra Iron Wood - MC-0077DI - knife
Collini Cutlery is the official distributor of MCUSTA Japanese knives for Italy
Intended use: sports / collection
Type of production: industrial cutting - craft assembly and finishing
Blade: in SanMai steel with VG-10 stainless steel cutting edge at 59 / 60HRC and outer cheeks in 33-layer nickel damask
Production Lama: Japan
Handle: Iron Wood
Blade length: 70mm.
Blade thickness: 3mm.
Length closed: 95mm.
Total length: 167mm.
Balancing: -
Weight: 66g.
Closure: Liner Lock
Clip: -
Sheath: fabric bag
Note: -MC-0077DI -
Mcusta - Tsuchi Damascus knife - MC-0114D - Forge Series - knife
Collini Cutlery is the official distributor of MCUSTA Japanese knives for Italy
Intended use: sports / collection
Type of production: industrial cutting - craft assembly and finishing
Production Lama: Japan
Blade: in damask laminated and hammered stainless steel with cutting edge in VG-10 at 59 / 60HRC
Handle: Stainless Steel
Blade length: 85mm.
Blade thickness: 3mm.
Length closed: 112mm.
Total length: 192mm.
Thick when closed: 8mm.
Weight: 114g.
Closure: Frame Lock
Clip: in stainless steel
Packaging: cardboard box with Mcusta logos
Note: -MC-0114D -
Mcusta - Elite Tactility knife - SPG2 Powder Steel - Iron Wood - MC-0125G - knife
Collini Cutlery is the official distributor of MCUSTA Japanese knives for Italy
The Sengoku series uses 3-layer SPG2 sintered and cryogenically hardened Japanese steel, one of the best ever produced in Japan
Intended use: sports / collection
Type of production: industrial cutting - craft assembly and finishing
Production Lama: Japan
Blade: in SPG-2 stainless steel at 61 / 62HRC in San Mai three-layer laminate
Handle: Iron Wood
Blade length: 95mm.
Blade thickness: 3mm.
Length closed: 115mm.
Total length: 207mm.
Thick when closed: 17.5mm.
Weight: 100g.
Closure: Liner Lock
Clip: in stainless steel
Packaging: cardboard box with Mcusta logos
Note: -For more information on the steel used, you can view the site: www.collinisteel.com
MC-0125G -
Mcusta - Elite Tactility knife - SPG2 Powder Steel - Corian - MC-0126G - knife
Collini Cutlery is the official distributor of MCUSTA Japanese knives for Italy
The Sengoku series uses 3-layer SPG2 sintered and cryogenically hardened Japanese steel, one of the best ever produced in Japan
Intended use: sports / collection
Type of production: industrial cutting - craft assembly and finishing
Production Lama: Japan
Blade: in SPG-2 stainless steel at 61 / 62HRC in San Mai three-layer laminate
Handle: Corian
Blade length: 95mm.
Blade thickness: 3mm.
Length closed: 115mm.
Total length: 207mm.
Thick when closed: 17.5mm.
Weight: 100g.
Closure: Liner Lock
Clip: in stainless steel
Packaging: cardboard box with Mcusta logos
Note: -For more information on the steel used, you can view the site: www.collinisteel.com
MC-0126G -
Mcusta - Elite Tactility knife - SPG2 Steel Powder - Micarta Series - MC-0121G - knife
Collini Cutlery is the official distributor of MCUSTA Japanese knives for Italy
The Sengoku series uses 3-layer SPG2 sintered and cryogenically hardened Japanese steel, one of the best ever produced in Japan
Intended use: sports / collection
Type of production: industrial cutting - craft assembly and finishing
Production Lama: Japan
Blade: in SPG-2 stainless steel at 61 / 62HRC in San Mai three-layer laminate
Handle: Micarta
Blade length: 95mm.
Blade thickness: 3mm.
Length closed: 115mm.
Total length: 207mm.
Thick when closed: 17.5mm.
Weight: 100g.
Closure: Liner Lock
Clip: in stainless steel
Packaging: cardboard box with Mcusta logos
Note: -For more information on the steel used, you can view the site: www.collinisteel.com
MC-0121G -
Mcusta - Toyotomi Hideyoshi MC-0182G knife - SPG2 Powder Steel - Sengoku Series - knife
Collini Cutlery is the official distributor of MCUSTA Japanese knives for Italy
The Sengoku series uses 3-layer SPG2 powder steel and cryogenically hardened Japanese steel, one of the best ever produced in Japan
Intended use: sports / collection
Type of production: industrial cutting - craft assembly and finishing
Production Lama: Japan
Blade: stainless steel SPG-2 at 61 / 62HRC
Handle: Pakka Wood
Blade length: 93mm.
Blade thickness: 3mm.
Length closed: 117mm.
Total length: 210mm.
Thick when closed: 17.5mm.
Weight: 120g.
Closure: Liner Lock
Clip: -
Packaging: cardboard box with Mcusta logos
Notes: cordura sheath and leatherMC-0182G -
Mcusta - Oda Nobunaga MC-0181G - SPG2 Powder Steel - Sengoku Series - knife
Intended use: sporting/collection
Type of production: industrial cut - handcrafted assembling and finishing
Blade production: Japan
Blade: SPG-2 stainless steel at 61/62HRC in three layers San Mai laminate
Handle: Micarta
Blade length: 93mm.
Blade thickness: 3mm.
Length closed: 117mm.
Total length: 210mm.
Thickness when closed: 17.5mm.
Weight: 120g.
Closure: Liner Lock
Clip: -
Package: cardboard box with Mcusta logos
Notes: Cordura and leather sheathMC-0181G -
Mcusta - MC-192C Slip Joint Knife Black / Yellow - knife
Collini Cutlery is the official distributor for Italy of MCUSTA Japanese knives
Destination of use: sport / collection
Type of production: industrial cutting - assembly and artisan finishes
Lama production: Japan
Blade: in laminated stainless steel damascus with cutting edge in VG-10 at 59 / 60HRC
Handle: wood
Blade length: 85mm.
Blade thickness: 3mm.
Length closed: 110mm.
Total length: 195mm.
Thick when closed: 12mm.
Weight: 78g.
Closure: Joint Slip
Clip: -
Packaging: cardboard box with Mcusta logos with fabric sheath
Note: -MC-192C -
Mcusta - Sengoku Damascus - MC-0182D Toyotomi Hideyoshi - knife
Intended Use: sport / collection
Type of production: Industrial cutting - assembly and handcrafted finishes
Production Lama: Japan
Blade: stainless steel sanmai with sharp VG-10 to 59 / 60HRC and External cheeks damask nickel to 33 layers
Handle: Micarta
Blade length: 93mm.
Blade thickness: 3mm.
Closed Length: 117mm.
Overall length: 210mm.
Thick when closed: 17.5mm.
Weight: 120g.
Lock: Liner Lock
Clips: stainless steel
Packaging: cardboard box with logos Mcusta
Notes: Cordura sheath and leatherMC-0182D -
Mcusta - Sengoku VG10 knife - MC-0181 Oda Nobunaga - knife
Mcusta - Sengoku VG10 knife - MC-0181 Oda Nobunaga - knife
Intended Use: sport / collection
Type of production: Industrial cutting - assembly and handcrafted finishes
Production Lama: Japan
Blade: Stainless Steel VG-10 to 59 / 60HRC
Handle: Black Micarta
Blade length: 93mm.
Blade thickness: 3mm.
Closed Length: 117mm.
Overall length: 210mm.
Thick when closed: 17.5mm.
Weight: 120g.
Lock: Liner Lock
Clips: stainless steel
Packaging: cardboard box with logos Mcusta
Notes: Cordura sheath and leatherMC-0181 -
Mcusta - Sengoku Damascus knife - MC-0181D Oda Nobunaga - knife
Mcusta - Sengoku Damascus knife - MC-0181D Oda Nobunaga - knife
Intended Use: sport / collection
Type of production: Industrial cutting - assembly and handcrafted finishes
Production Lama: Japan
Blade: stainless steel sanmai with sharp VG-10 to 59 / 60HRC and External cheeks damask nickel to 33 layers
Handle: Black Micarta
Blade length: 93mm.
Blade thickness: 3mm.
Closed Length: 117mm.
Overall length: 210mm.
Thick when closed: 17.5mm.
Weight: 120g.
Lock: Liner Lock
Clips: stainless steel
Packaging: cardboard box with logos Mcusta
Notes: Cordura sheath and leatherMC-0181D -
Mcusta - Basic White Series Damascus - MC0025D - knife
Intended use: Sports / Collection
Type of production: Industrial cutting - assembly and handcrafted finishes
Production Lama: Japan
Blade: sanmai sharp stainless steel with VG-10 59 / 60HRC and External cheeks damask nickel to 33 layers
Blade treatment: -
Handle: Corian
Blade length: 87mm.
Blade Thickness: 3mm.
Closed Length: 110mm.
Overall length: 193mm.
Balancing: -
Weight: 98g.
Lock: Liner Lock
Clip: Steel
Sheath: -
Notes: -MC0025D -
Mcusta - Series Katana - MC-0041C - knife
Mcusta - Series Katana - MC-0041C - knife
Intended use: sports / collection
Type of production: industrial cutting - assembly and handcrafted finishes
Production Lama: Japan
Blade: laminated steel with sharp VG-10 to 59/60 HRC
Handle: Aluminum
Blade length: 80mm.
Blade thickness: 3mm.
Closed Length: 110mm.
Overall length: 194mm.
Thick when closed: 14mm.
Weight: 96g.
Lock: Liner Lock
Clip: Stainless Steel
Packaging: cardboard box with logos Mcusta
Notes: -MC-0041C -
Mcusta - Date Masamune MC-0186G knife - SPG2 Powder Steel - Sengoku Series - knife
Collini Cutlery is the official distributor of MCUSTA Japanese knives for Italy
The Sengoku series uses 3-layer SPG2 powder steel and cryogenically hardened Japanese steel, one of the best ever produced in Japan
Intended use: sports / collection
Type of production: industrial cutting - craft assembly and finishing
Production Lama: Japan
Blade: stainless steel SPG-2 at 61 / 62HRC
Handle: Pakka Wood
Blade length: 93mm.
Blade thickness: 3mm.
Length closed: 117mm.
Total length: 210mm.
Thick when closed: 17.5mm.
Weight: 120g.
Closure: Liner Lock
Clip: -
Packaging: cardboard box with Mcusta logos
Notes: -MC-0186G -
Mcusta - Basic Series Rosewood - MC-0014R - knife
Mcusta - Basic Series Rosewood - MC-0014R - knife
Intended use: Sport
Type of production: Industrial
Production Lama: Japan
Blade: Stainless VG-10
Treatment Lama: Satin
Handle: Rosewood wood
Blade length: 85mm.
Blade thickness: 3mm.
Closed Length: 110mm.
Overall length: 190mm.
Thick when closed: 15mm.
Balancing: -
Weight: 96g.
Lock: Liner Lock
Clip: Stainless Steel
Sheath: -
Packing: brown cardboard box with logos Mcusta
Notes: -MC-0014R -
Mcusta - Tsuchi Green - MC-163D - knife
Mcusta - Tsuchi Green - MC-163D - knife
Type of production: industrial cutting - assembly and handcrafted finishes
Production Lama: Japan
Blade: Damascus steel rolled and hammered with sharp VG-10 to 59/60 HRC
Handle: Aluminum
Blade length: 85mm.
Blade thickness: 3mm.
Closed Length: 110mm.
Overall length: 190mm.
Thick when closed: 14mm.
Weight: 94g.
Lock: Liner Lock
Clip: Stainless Steel
Packaging: cardboard box with logos Mcusta
Notes: -MC-0163D -
Mcusta - Fuji Kamon Crest - Japan Damascus - MC-0094D - knife
Cutlery Collini is the official distributor for Italy of Japanese knives Mcusta
Intended use: sports / collection
Type of production: industrial cutting - assembly and handcrafted finishes
Blade: Stainless sanmai with sharp steel VG-10 to 59/60 HRC and cheeks outside Damascus nickel to 33 layers
Production Lama: Japan
Handle material: stainless steel
Blade length: 70mm.
Blade Thickness: 3mm.
Closed Length: 95mm.
Overall length: 164mm.
Balancing: -
Weight: 90g.
Lock: Liner Lock
Clip: -
Sheath: Belt, Nylon, with traditional motifs
Notes: -12015 -
Mcusta - Aoi Kamon Crest - Japan Damascus - MC-0091D - knife
Cutlery Collini is the official distributor for Italy of Japanese knives Mcusta
Intended use: sports / collection
Type of production: industrial cutting - assembly and handcrafted finishes
Blade: Stainless sanmai with sharp steel VG-10 to 59/60 HRC and cheeks outside Damascus nickel to 33 layers
Production Lama: Japan
Handle material: stainless steel
Blade length: 70mm.
Blade Thickness: 3mm.
Closed Length: 95mm.
Overall length: 164mm.
Balancing: -
Weight: 90g.
Lock: Liner Lock
Clip: -
Sheath: Belt, Nylon, with traditional motifs
Notes: -12014 -
Mcusta - Jazz Knife Damascus Cocobolo Ebony African MC-0171D - knife
Mcusta - Jazz Knife Damascus Cocobolo Ebony African MC-0171D - knife
Collini Cutlery is the official distributor for Italy of Japanese knives Mcusta
Intended use: sporivo / collection
Type of production: industrial cutting - assembly and handcrafted finishes
Blade: VG-10 59/60HRC
Treatment Blade: -
Blade Production: Japan
Handle: wood cocobolo and ebony wood african with steel insert
Blade length: 80mm.
Blade Thickness: 3mm.
Closed Length: 110mm.
Overall length: 193mm.
Balancing: -
Weight: 90g.
Lock: Liner Lock
Clip this
Sheath: Cordura
Notes: -MC-0171D -
Mcusta - Teana knife - Shinra Mixture - SPG2 Powder Steel - MC-0143G - knife
Coltelleria Collini is the official distributor for Italy of the Japanese MCUSTA knives
Intended use: dirty / collection
Type of production: industrial cut - assembly and handmade finishes
Blade: SPG2 61 / 62HRC
Blade treatment: -
Lama production: Japan
Handle: satin steel and wooden insert
Blade length: 70mm.
Blade thickness: 3mm.
Length closed: 96mm.
Total length: 168mm.
Balancing: -
Weight: 82g.
Closure: Liner Lock
Clip: present
Sheath: cordura
Note: -MC-0143G -
Mcusta - Riple knife - MC-0142 - knife
Mcusta - Riple knife - MC-0142 - knife
Collini Cutlery is the official distributor for Italy of Japanese knives Mcusta
Intended use: sporivo / collection
Type of production: industrial cutting - assembly and handcrafted finishes
Blade: VG-10 59/60HRC
Treatment Blade: -
Blade Production: Japan
Handle material: stainless steel satin and ebony inlay
Blade length: 70mm.
Blade Thickness: 3mm.
Closed Length: 96mm.
Overall length: 166mm.
Balancing: -
Weight: 86g.
Lock: Liner Lock
Clip: -
Sheath: Cordura
Notes: -MC-0142 -
Mcusta - Mari Damascus Japan - MC-0036D - knife
Mcusta - Mari Damascus Japan - MC-0036D - knife
Collini Cutlery is the official distributor for Italy of Japanese knives Mcusta
Intended Use: Sport / collection
Type of production: industrial cutting - assembly and handcrafted finishes
Blade: Stainless steel sanmai with sharp VG-10 to 59/60HRC cheeks and external nickel damascus 33 layers
Blade Production: Japan
Handle: damascus steel
Blade length: 70mm.
Blade Thickness: 3mm.
Closed Length: 95mm.
Overall length: 164mm.
Balancing: -
Weight: 84g.
Lock: Liner Lock
Clip: -
Sheath: -
Notes: -MC-0036 -
Mcusta - Gentleman Folder Damascus Japan - MC-0052D - knife
Mcusta - Gentleman Folder Damascus Japan - MC-0052D - knife
Intended Use: Sport / collection
Type of production: industrial cutting - assembly and handcrafted finishes
Blade: Stainless steel sanmai with sharp VG-10 to 59/60HRC cheeks and external nickel damascus 33 layers
Blade Production: Japan
Handle material: G10
Blade length: 70mm.
Blade Thickness: 3mm.
Closed Length: 95mm.
Overall length: 167mm.
Balancing: -
Weight: 66g.
Lock: Liner Lock
Clip: -
Sheath: -
Notes: -MC-0052D -
Mcusta - Elite Tactility Cocobolo knife - MC-0122DR - knife
Collini Cutlery is the official distributor of MCUSTA Japanese knives for Italy
Intended use: sports / collection
Type of production: industrial cutting - craft assembly and finishing
Production Lama: Japan
Blade: in SanMai steel with VG-10 stainless steel cutting edge at 59 / 60HRC and outer cheeks in 33-layer nickel damask
Handle: cocobolo wood
Blade length: 95mm.
Blade thickness: 3mm.
Length closed: 115mm.
Total length: 207mm.
Thick when closed: 17.5mm.
Weight: 100g.
Closure: Liner Lock
Clip: in stainless steel
Packaging: cardboard box with Mcusta logos
Note: -10895 -
Mcusta - Nami Large - MC-112D - knife
Intended use: sports / collection
Type of production: industrial cutting - craft assembly and finishing
Production Lama: Japan
Blade: in damask laminated and hammered stainless steel with cutting edge in VG-10 at 59 / 60HRC
Handle: Stainless Steel
Blade length: 85mm.
Blade thickness: 3mm.
Length closed: 112mm.
Total length: 192mm.
Thick when closed: 8mm.
Weight: 114g.
Closure: Frame Lock
Clip: in stainless steel
Packaging: cardboard box with Mcusta logos
Note: -MC-0112D -
Mcusta - Fusion Tsuchi Pink knife - MC-0162D - knife
Intended Use: Sport / collection
Type of production: industrial cutting - assembly and handcrafted finishes
Blade Production: Japan
Blade: damascus steel laminate and hammered with sharp VG-10 to 59/60HRC
Handle: Aluminum
Blade length: 85mm.
Blade thickness: 3mm.
Closed Length: 110mm.
Overall length: 190mm.
Thick when closed: 14mm.
Weight: 94g.
Lock: Liner Lock
Clip: Stainless Steel
Packaging: cardboard box with logos Mcusta
Notes: -MC-0162D -
Mcusta - Tsuchi Black - MC-161D - knife
Intended Use: Sport / collection
Type of production: industrial cutting - assembly and handcrafted finishes
Blade Production: Japan
Blade: damascus steel laminate and hammered with sharp VG-10 to 59/60HRC
Handle: Aluminum
Blade length: 85mm.
Blade thickness: 3mm.
Closed Length: 110mm.
Overall length: 190mm.
Thick when closed: 14mm.
Weight: 94g.
Lock: Liner Lock
Clip: Stainless Steel
Packaging: cardboard box with logos Mcusta
Notes: -MC-0161D -
Mcusta - Gentleman Folder Damascus Japan - MCU79DP - knife
Mcusta - Gentleman Folder Damascus Japan - MCU79D - knife
Intended use: sports / collection
Type of production: industrial cutting - craft assembly and finishing
Blade: in SanMai steel with VG-10 stainless steel cutting edge at 59 / 60HRC and outer cheeks in 33-layer nickel damask
Production Lama: Japan
Handle: Pakkawood wood
Blade length: 70mm.
Blade thickness: 3mm.
Length closed: 95mm.
Total length: 167mm.
Balancing: -
Weight: 66g.
Closure: Liner Lock
Clip: -
Sheath: fabric bag
Note: -MC-0079DP -
Mcusta - Damascus Tsuchi Small Japan - MC-0113D - knife
Intended use: sports / collection
Type of production: industrial cutting - craft assembly and finishing
Blade: in SanMai steel with VG-10 stainless steel cutting edge at 59 / 60HRC and outer cheeks in 33-layer nickel damask
Production Lama: Japan
Handle: hammered steel
Blade length: 65mm.
Blade thickness: 3mm.
Length closed: 95mm.
Total length: 160mm.
Balancing: -
Weight: 74g.
Closure: Liner Lock
Clip: -
Sheath: -
Note: -MC-0113D -
Mcusta - Gentleman Folder Damascus Japan - MC-0078D - knife
Intended Use: Sport / collection
Type of production: industrial cutting - assembly and handcrafted finishes
Blade: Stainless sanmai with sharp steel VG-10 to 59/60HRC cheeks and external nickel damascus 33 layers
Blade Production: Japan
Handle material: wood
Blade length: 70mm.
Blade Thickness: 3mm.
Closed Length: 95mm.
Total length: 167mm.
Balance: -
Weight: 66g.
Lock: Liner Lock
Clip: -
Sheath: -
Notes: -MCU54D -
Mcusta - Take knife VG10 Damascus - Shinra Series - Iron Wood - MC-0074DI - knife
Collini Cutlery is the official distributor of MCUSTA Japanese knives for Italy
Intended use: sports / collection / gentlemen
Type of production: industrial cutting - craft assembly and finishing
Blade: in SanMai steel with VG-10 stainless steel cutting edge at 59 / 60HRC and outer cheeks in 33-layer nickel damask
Production Lama: Japan
Handle: Iron Wood
Blade length: 65mm.
Blade thickness: 3mm.
Length closed: 95mm.
Total length: 164mm.
Balancing: -
Weight: 58g.
Closure: Liner Lock
Clip: -
Sheath: in fabric
Note: -MC-0074DI -
Spartan Blades - Akribis Tungsten Flat Black - SF1 - knife
Purpose: Tactical / Sports
Type of production: Semi-Industrial
Country of Production: USA
Blade: Stainless Steel CPM-S35VN
Blade Treatment: Tungsten DLC PVD Flat Black
Handle: Titanium and G10
Blade length: 89mm.
Blade thickness: 3.2mm.
Total length: 216mm.
Weight: 149g.
Blocking System: Frame Lock with Lock Bar Stabilizer system by Rick Hinderer
Clip: Stainless Steel
Package : carton box with Spartan Blades logos
Notes: : Design by Iovito / Carey10762 -
Mcusta - Bamboo knife - MC-0145 - coltello
La Coltelleria Collini è distributore ufficiale per l’Italia dei coltelli giapponesi MCUSTA
Destinazione d'uso: sporivo/collezione
Tipo di produzione: taglio industriale - montaggio e finiture artigianali
Lama: VG-10 59/60HRC e guance esterne in acciaio inox
Trattamento Lama: -
Produzione Lama: Japan
Manicatura: acciaio damasco e cocobolo
Lunghezza lama: 70mm.
Spessore della lama: 3mm.
Lunghezza chiuso: 96mm.
Lunghezza totale: 166mm.
Bilanciatura: -
Peso: 96g.
Chiusura: Liner Lock
Clip: -
Fodero: cordura
Note: -4004 -
Mcusta - Basic knife Ebano Series - MC-0023 - knife
Intended use: sports
Type of production: Industrial
Production Lama: Japan
Blade: VG-10 steel
Blade treatment: Satin finish
Handle: Ebony wood
Blade length: 85mm.
Blade thickness: 3mm.
Length closed: 110mm.
Total length: 190mm.
Thick when closed: 15mm.
Balancing: -
Weight: 96g.
Closure: Liner Lock
Clip: -
Sheath: in cordura, attention may vary from what is shown in the photo
Packaging: brown cardboard box with Mcusta logos
Note: -3990 -
Mcusta - Basic knife Series Damasco - MC-0012D - coltello
La Coltelleria Collini è distributore ufficiale per l’Italia dei coltelli giapponesi MCUSTA
Destinazione d'uso: Sportivo/Collezione
Tipo di produzione: taglio industriale - montaggio e finiture artigianali
Produzione Lama: Japan
Lama: in acciaio SanMai con tagliente inox VG-10 59/60HRC e guance esterne in damasco al nickel a 33 strati
Trattamento Lama: -
Manicatura: Micarta
Lunghezza lama: 87mm.
Spessore della lama: 3mm.
Lunghezza chiuso: 110mm.
Lunghezza totale: 193mm.
Bilanciatura: -
Peso: 98g.
Chiusura: Liner Lock
Clip: in acciaio
Fodero: -
Note: -MC0012D -
Mcusta - Basic knife Series Damasco - MC-0018D - knife
Collini Cutlery is the official distributor of MCUSTA Japanese knives for Italy
Intended use: sports / collection
Type of production: industrial cutting - craft assembly and finishing
Production Lama: Japan
Blade: in SanMai steel with VG-10 stainless steel cutting edge at 59 / 60HRC and outer cheeks in 33-layer nickel damask
Blade treatment: -
Handle: Iron Wood
Blade length: 87mm.
Blade thickness: 3mm.
Length closed: 110mm.
Total length: 194mm.
Thick when closed: 17.5mm.
Balancing: -
Weight: 92g.
Closure: Liner Lock
Clip: in stainless steel
Sheath: -
Packaging: cardboard box with Mcusta logos
Note: -MC-0018D -
Mcusta - Tactility knife Series Micarta - MC-00121D - knife
Collini Cutlery is the official distributor for Italy of MCUSTA Japanese knives
Destination of use: sport / collection
Type of production: industrial cutting - assembly and artisan finishes
Lama production: Japan
Blade: SanMai steel with sharp stainless steel VG-10 at 59 / 60HRC and external chevron damask with 33 layers nickel
Handle: Micarta
Blade length: 95mm.
Blade thickness: 3mm.
Length closed: 115mm.
Total length: 207mm.
Thick when closed: 17.5mm.
Weight: 100g.
Closure: Liner Lock
Clip: stainless steel
Packaging: cardboard box with Mcusta logos
Note: -MC-0121D -
Mcusta - Tactility Quince Burl - MC-0124D - knife
Intended Use: Sport / collection
Type of production: industrial cutting - assembly and handcrafted finishes
Blade Production: Japan
Blade: Stainless steel sanmai with sharp VG-10 to 59/60HRC cheeks and external nickel damascus 33 layers
Handle material: Burl quince (apple quince)
Blade length: 95mm.
Blade thickness: 3mm.
Closed Length: 115mm.
Overall length: 207mm.
Thick when closed: 17.5mm.
Weight: 100g.
Lock: Liner Lock
Clip: Stainless Steel
Packaging: cardboard box with logos Mcusta
Notes: -3992 -
Mcusta - Take Damasco Japan - MC-0033D - knife
Intended use: sports / collection
Type of production: industrial cutting - craft assembly and finishing
Blade: in SanMai steel with VG-10 stainless steel cutting edge at 59 / 60HRC and outer cheeks in 33-layer nickel damask
Country of production: Japan
Handle: damask steel
Blade length: 70mm.
Blade thickness: 3mm.
Length closed: 95mm.
Total length: 164mm.
Balancing: -
Weight: 88g.
Closure: Liner Lock
Clip: -
Sheath: -
Note: -MC-0033D -
Mcusta - Tannbo Damasco Japan - MC-0035D - coltello
La Coltelleria Collini è distributore ufficiale per l’Italia dei coltelli giapponesi MCUSTA
Destinazione d'uso: sporivo/collezione
Tipo di produzione: taglio industriale - montaggio e finiture artigianali
Lama: in acciaio SanMai con tagliente inox VG-10 59/60HRC e guance esterne in damasco al nickel a 33 strati
Trattamento Lama: -
Produzione Lama: Japan
Manicatura: acciaio damasco
Lunghezza lama: 65mm.
Spessore della lama: 3mm.
Lunghezza chiuso: 92mm.
Lunghezza totale: 163mm.
Bilanciatura: -
Peso: 86g.
Chiusura: Liner Lock
Clip: -
Fodero: -
Note: -3983 -
Mcusta - Tsuchi Damasco Japan - MC-0034D - knife
Intended use: sports / collection
Type of production: industrial cutting - craft assembly and finishing
Blade: in SanMai steel with VG-10 stainless steel cutting edge at 59 / 60HRC and outer cheeks in 33-layer nickel damask
Country of production: Japan
Handle: damask steel
Blade length: 70mm.
Blade thickness: 3mm.
Length closed: 95mm.
Total length: 164mm.
Balancing: -
Weight: 88g.
Closure: Liner Lock
Clip: -
Sheath: -
Note: -MC-0034D