Knives, collection knife, tactical knives, outdoor knives, pocket knives and tools
-
Livio Montagna - 2014 Hunting Knife - RWL34 & Sambar Amber - PRIVATE COLLECTION - handcrafted knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Very Good
* Commercially available No.
* Sharpening: original
* Marks on blade: none
* Marks on handle: a few small hairlines on heads.
* Packaging: none
* Scabbard: Leather, handcrafted, original with a few marks due to age.
* Manuals, Certificates and Warranties: certificate of authenticity signed and dated by the craftsman.
* Checked and Certified by our in-house laboratoryIntended use: hunting / collection
Type of production: handcrafted
Country of production: Italy
Blade: stainless steel RWL34 hardened to 59/60 HRC
Blade finish: satin finish
Handle: amber Sambar stag with 416 stainless steel guard and pommel
Blade length: 107mm.
Blade thickness: 3.5mm.
Total length: 220mm.
Weight: 181g.
Sheath: handcrafted, leather, hand-stitched
Packaging: -
Notes: previously purchased knife, from private collection, handcrafted by Master C.IC. (Italian Knifemakers Guild) Livio Montagna.AP-MONT-CPSA -
Tops - Wolf Pup knife - knife
Tops - Wolf Pup knife - knife
Intended Use: Tactical/Military
Type of production: semi-industrial
Blade: full-tang 1095 carbon steel
Lama USA production
Handle: Gray micarta with white spacers
Blade length: 55mm.
Blade thickness: 3.5mm.
Closed length: -mm.
Total length: 130mm.
Balancing: -
Weight: 106g.
Closure: -
Clips: -
Sheath: Kydex with multi-position clip
Note:TOPS-5737 -
Fantoni - Hide Fixed Premium by T. Rumici - 20Pcs. Limited Edition - PRIVATE COLLECTION - knife
Knife collected from a private collection - Never used, never taken out of its box, like new - Rare model produced by Fantoni in 2009 in a limited edition of only 20 pieces based on a design by Tommaso Rumici, one of his most famous and successful knives, still very modern and with an incredibly attractive design - Supplied with box, warranty certificate, sheath and replacement Ebony grips - Checked and certified by our in-house laboratory.
Intended Use: Collection / SportingCountry of manufacture: Italy
Type of production: industrial
Blade: stainless steel CPM-S30V 61-62HRC
Blade finish: satin-finished
Handle: made of micarta or ebony wood, interchangeable as desired (cheeks included in package)
Blade length: 80mm.
Blade thickness: 3.5mm.
Total length: 170mm.
Balance: set back 1cm. from the lower guard branch
Weight: 68g.
Sheath: Made of kydex, with clip
Notes: Design by T. Rumici - Limited and numbered edition of only 20 pieces - Collected from private collection, like new.Link to the HIDE project page directly on the website of Designer Tommaso Rumici
FA-HIDE-CP20 -
Ontario - RAT 3 Randall's Adventure Training D2 - Full Set - PRIVATE COLLECTION - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased.
* Condition: Like new
* Commercially available: Discontinued - the company has permanently ceased operations.
* Sharpening: Factory
* Marks on blade: No
* Marks on handle: No
* Box: Present, new and perfect
* Scabbard: Present, like new.
* Manuals, Certificates and Warranties: No
* Checked and Certified by our in-house laboratory
Intended Use: hiking / utility
Production type: Industrial
Country of manufacture: USA
Blade: Fulltang, D2 steel with powder finish
Handle: Micarta
Blade length: 99mm.
Blade thickness: 3.5mm.
Total length: 200mm.
Balance: backward
Weight: 157g.
Sheath: thermoplastic, with TEK-LOK attachment
Notes: knife like new, withdrawn from private collectionONRAT3-CP -
Tops - Silent Hero 4 by Anton Du Plessis - knife
The original purpose of the Silent Hero knife was to provide a medium-sized tool for use by an interdiction unit specializing in fighting rhino poachers in Africa. It is an excellent design that has served many people on different continents. Over time, Anton (the designer) realized that he did not always need such a large knife strapped to his hip.
This is where the Silent Hero 4 was born. The handle and blade shape of the full-sized knife were perfect for a variety of tasks. By reducing them, you get a knife that is much easier to carry as an EDC, but still long enough to handle most cutting tasks. The appearance of this smaller version is basically the same, but there are some differences. The blade is a bit thinner, the finish is Sniper Gray Cerakote (instead of Black River Wash) and it comes with a Kydex sheath instead of leather. So if you are looking for a blade to match your Silent Hero or simply prefer a blade length of about 4" instead of 6", the new Silent Hero 4 will be an excellent addition to your collection!
Intended Use: UtilityType of production: Semi-Industrial
Country of manufacture: USA
Blade: full tang in 1095 58/60HRC steel
Blade treatment: Cerakote Sniper Gray
Handle: Canvas Micarta
Blade length: 108mm.
Blade thickness: 3.4mm.
Total length: 225mm.
Balance: on the guard branch
Weight: 170g.
Sheath: kydex
Packaging: transparent plastic bag
Notes: Emergency whistle - Design by Anton Du PlessisHERO4-01 -
Tops - Baja 3.0 - Small Outdoor Knife - Green Canvas Micarta - Knife
The Baja 3.0 knife is a synthesis of simple design and excellent execution. The 3.0-inch blade can adequately handle a wide variety of tasks, such as building wooden tools, building a fire and shelter, or felling an animal. The 1/8-inch thick 1095 high-carbon steel provides excellent cutting, penetration and edge-holding qualities. The simple handle design, with its Micarta grooves, provides the user with excellent traction in most circumstances.
Intended Use: Utility
Production Type: Semi-Industrial
Country of Production: USA
Blade: full tang in 1095 58/60HRC steel
Blade Finish: Coyote Tan Coatung
Handle: Canvas Micarta
Blade Length: 76mm.
Blade thickness: 3.5mm.
Total length: 158mm.
Weight: 85g.
Sheath: leather, belt
Packaging: transparent plastic bag
Notes: Emergency whistle - Each piece is numbered and accompanied by certificate of guarantee and authenticityTPBAJA03 -
Tops - C.U.B. Compact Utility Blade - Tan Micarta - Knife
The C.U.B. (Compact Utility Blade) is designed to serve as a compact and lightweight sidekick to a machete/bolo/parang in a tropical environment or of a tomahawk/axe in a forest environment. It is capable of performing all the important utility functions for camp and food preparation, leaving the heavy lifting to the other cutting tools. With an emphasis on compactness, the C.U.B. was designed with two styles of knives in mind: the Finish Puukko (with scandi sharpening) and the Kephart. Put them in a blender and you get the C.U.B. TOPS: robust simplicity!
Intended Use: Utility
Type of Production: Semi-Industrial
Country of Production: USA
Blade: full tang in 1095 58/60HRC steel
Blade Finish: Stonewashed
Handle: Canvas Micarta
Blade Length: 95mm.
Blade thickness: 3.5mm.
Total length: 203mm.
Weight: 148g.
Scabbard: Nylon, belt-mounted, M.O.L.L.E. compatible.
Packaging: transparent plastic bag
Notes: Emergency whistle - Small Survival Kit with tinder box, compass, rubber bands etc. - Each piece is numbered and accompanied by certificate of guarantee and authenticityTPCUB01 -
Tops - Mini Tom Brown Tracker knife # 4 - Camo 1095 - TBT-040-CAMO - knife
Intended use: Collection / Survival
Type of production: semi industrial
Production Lama: USA
Blade: 1095 58HRC carbon steel
Blade treatment: BTC - Camo Traction Coating
Handle: micarta with red spacers
Blade length: 85mm.
Blade thickness: 3.5mm.
Closed Length: -
Total length: 168mm.
Thick when closed: -
Balancing: on the guard branch
Weight: 92g.
Closure: -
Clip: -
Sheath: in kydex, tactical with multi-position clip
Packaging: -
Notes: Design by Tom Brown, extra small version of the knife used in the film The Hunted with Benicio Del Toro, each piece is numbered and accompanied by a certificate of guarantee and authenticity.TBT-040-CAMO