Knives, collection knife, tactical knives, outdoor knives, pocket knives and tools
-
Fox - Sherpa Bushman - D2 Green Micarta - FX-610 - Knife
Intended use: Tactical / Utility
Type of production: Industrial
Country of production: Italy
Blade: full tang in Bohler K110 (D2) steel at 60 / 61HRC
Blade treatment: Blackwashed
Handle: Micarta
Blade length: 165mm.
Blade thickness: 5mm.
Total length: 287mm.
Balancing: Advanced at 1cm. from the guard branch
Weight: 351g.
Sheath: leather, belt, ambidextrous, for horizontal or vertical port
Packaging: cardboard box with Fox logos
Notes: flat chamfering with scandi-like sharpening, convex, in the rear part of the bladeFX-610 -
Strider Knives - 2010 Tiger Stripe BG Gunner Grip Black G10 - PRIVATE COLLECTION - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Overall in very good condition.
* Commercially available Discontinued; Company no longer in operation as of 2017.
* Sharpening: Factory.
* Marks on blade: Normal marks, found on all Strider models with Tiger Stripe finish.
* Marks on handle: None
* Box: Originally sold unboxed
* Scabbard: Original, in Khaki-colored Cordura, by Eagle USA.
* Manuals, Certificates and Warranties:Originally sold without certificates or warranties.
* Checked and Certified by our in-house laboratory
Intended Use: Tactical / Collection
Type of manufacture:Midtech
Country of Production: USA
Blade: Stainless steel CPM-S30V
Blade Finish: Tiger Stripe
Handle: Black G-10 with GG (Gunner Grip) pattern
Blade length: 160mm.
Blade thickness: 6.3mm.
Total length: 298mm.
Weight: 353g.
Sheath: Khaki, cordura, by Eagle USA
Packaging: -
Notes: 2010 specimen in very good condition - Shows small scuff marks on the Tiger Stripe finish, which is common with any Strider model made with this matte blade finish - Strider knives have always been offered by the company without any box, packaging, manual or certificate - This historic company ceased operations in 2017, after a 25-year career - Mick Strider, the company's previous founding partner, is still in business and dedicated solely to making custom knives.AP-ST-BG-GG -
Puma - Back Packer 465 knife - PRIVATE COLLECTION - knife
KNIFE WITHDRAWAL FROM A PRIVATE COLLECTION
* Type: Previously purchased
* Conditions: Like new
* Commercially available: Out of production, model dating back to the 90s
* Sharpening: Factory
* Marks on blade: No
* Marks on the handle: No
* Box: without box
* Sheath: -
* Manuals, Certificates and Warranties: -
* Checked and certified by our internal laboratory
Intended use: Collection / VintageType of production: artisanal
Country of production: Germany
Blade: stainless steel
Blade finish: satin finish
Handle: ABS with metal parts
Blade length: 80mm.
Blade thickness: 2.5mm.
Total length: 185mm.
Balancing: backward
Weight: 130g.
Sheath: -
Packaging: -
Notes: Vintage 90s knifePU-BP465 -
Buck - 124 Frontiersman Pakkawood 1984 - PRIVATE COLLECTION - knife
The Buck 124 was originally designed in 1966 as a dive combat knife called the Nemo. The model then went into production in 1967 and was offered with either a dive sheath (NEMO) or a leather sheath (FRONTIERSMAN). The knife was the same and has remained so to this day.
In the 1960s about 300 examples were produced and they had black phenolic handles with white Teflon spacers. Then in the 1970s it had a fluctuating production, with very poor sales numbers, until in '73 it was offered with a "Buckarta" (Micarta) handle and began to find favor with the public, with over 10000 examples sold until the early 1980s. Until 1983 model production remained high, and in 1984 a version of the FRONTIERSMAN with a Pakkawood handle was introduced; the 1984 version did not have the patent logos engraved, the 1985 version had the patent engravings, and from 1986 the knife began to have the production date engraved on the blade.
Therefore, our proposed model is from 1984.
Knife withdrawn from private collection - Classic Buck model dating from 1984, first series with wooden handle - Overall in very good condition, with no particular noticeable marks, with a few small scratches on aluminum guard and pommel - Scabbard in excellent condition - Original factory sharpening, but underperforming - Lacking box and certificates - Checked and certified by our in-house laboratory.
Intended Use: Hunting / Utility / Multirole / CollectionType of production: Industrial
Country of manufacture: USA
Blade: full tang, 425M stainless steel
Blade finish: satin-finished
Handle: Pakkawood
Blade length: 159mm.
Blade thickness: 4.5mm.
Total length: 300mm.
Balance: backward
Weight: 377g.
Sheath: black leather
Packaging: absent
Notes: knife withdrawn from private collection, 1984 specimen, overall in very good conditionBU-124PW-CP -
Puma - Defender LM - 154CM Limited Edition - 14 6481 - PRIVATE COLLECTION - knife
Iconic knife produced by Puma and dating back to the late 1980s, characterized by a then very modern line and a very advanced steel for the time (154CM). Knife withdrawn from private collection - Overall in very good condition - Never used, never sharpened, still with factory sharpening - A few small marks on the right side handle, in concomitance with the sheath that goes to hook the knife through a pin that tends to irreparably rub the handle itself - Supplied with original wooden case and leather sheath - Checked and certified by our internal laboratory Coltelleria Collini
Intended use: Collection / Vintage / Tactical
Type of production: handcrafted
Country of manufacture: Germany
Blade: stainless steel 154CM
Blade finish: satin-finished
Handle: Integral, stainless steel and Micarta
Blade length: 160mm.
Blade thickness: 5.5mm.
Total length: 290mm.
Balance: backward
Weight: 285g.
Sheath: leather
Packaging: wooden case
Notes: 1980s Vintage knife - Limited edition of only 500 pieces, numbered on the blade, specimen 170 of 550 - Knife withdrawn from private collection globally in excellent conditionPU-DEFLM-CP -
Medford Knife and Tools - USMC Fighter tactical knife MK103 - knife
modern version of the classic USMC produced by Medford
Intended use: Tactical / Collection
Type of production: Custom
Lama production: U.s.a
Blade: S35VN steel
Blade treatment: S35VN
Handle: G10 3-D surfaced multi-colored
Blade length: 165mm.
Blade thickness: 6.5mm.
Total length: 290mm.
Balancing: set back 1.5 cm on the guard branch
Weight: 488g.
Sheath: custom in leather
Packaging: nylon case, with zip closure and Medford logos
Notes: Designed and built by Greg MedfordMK103 -
Fox - Coyote G10 Modras Dagger - Single Wire - FX-508 - knife
Fox - Coyote G10 Modras Dagger - Single Wire - FX-508 - knife
Intended use: Tactical / Military / Collectibles
Type of production: Industrial
Production Blade: Italy
Blade: Stainless steel N690Co
Treatment Blade: PVD
Handle: G-10 Coyote
Blade length: 160mm.
Blade thickness: 6.3mm.
Length closed: -
Overall length: 330mm.
Thick when closed: -
Balance: Set back
Weight: 342g.
Closure: -
Clip: -
Sheath: leather, with attacks M.O.L.L.E.
Packaging: Cardboard box with logos FKMD
Notes: single-wire versionFX-508 -
Fox - Modras G10 Black Dagger - Single Wire - FX-507 - knife
Fox - Modras G10 Black Dagger - Single Wire - FX-507 - knife
Intended use: Tactical / Military / Collectibles
Type of production: Industrial
Production Blade: Italy
Blade: Stainless steel N690Co
Treatment Blade: PVD
Handle: G-10
Blade length: 160mm.
Blade thickness: 6.3mm.
Length closed: -
Overall length: 330mm.
Thick when closed: -
Balance: Set back
Weight: 342g.
Closure: -
Clip: -
Sheath: leather, with attacks M.O.L.L.E.
Packaging: Cardboard box with logos FKMD
Notes: single-wire versionFX-507 -
Fox - Stealth Tanto - Titanio e Carbonio - FX-SCT01B - coltello
Destinazione d'uso: tattico/militare
Tipo di produzione: industriale
Lama: Titanio Beta 45HRC antiriflesso e Fibra di Carbonio
Produzione Lama: Italia
Manicatura: smontabile in Foprprene
Lunghezza lama: 160mm.
Spessore della lama: 6mm.
Lunghezza chiuso: -
Lunghezza totale: 296mm.
Bilanciatura: sul ramo di guardia
Peso: 158g.
Chiusura: -
Clip: -
Fodero: Kydex con attacco multiposizione in polimeri
Note: attacco multiposizione in acciaio sostituibile compreso nella confezione5758 -
Fox - Trapper - FX-132MGT - knife
Fox - Trapper - FX-132MGT - knife
Intended usage: Utility
Type of production: Industrial
Production Blade: Italy
Blade: Stainless steel N609Co 58/60HRC
Treatment Blade: Black Teflon
Handle: Green Canvas Micarta
Blade length: 165mm.
Blade thickness: 6mm.
Length closed: -
Total length: 295mm.
Thick when closed: -
Balance: advanced to 0.5cm.
Weight: 358g.
Closing: -
Clip: -
Sheath: Cordura
Packaging: cardboard box with Fox logos
Notes: -FX-132MGT