Knives, collection knife, tactical knives, outdoor knives, pocket knives and tools

Collini Cutlery is the official distributor for Italy of MCUSTA Japanese knives

Intended use: sports / collection

Type of production: industrial cutting - handcrafted assembly and finishing
Blade: SPG2 61 / 62HRC
Blade treatment: -
Production Lama: Japan
Handle: Damascus steel and pakka wood
Blade length: 70mm.
Blade thickness: 3mm.
Closed length: 96mm.
Total length: 166mm.
Balancing: -
Weight: 96g.
Closure: Liner Lock
Clip: -
Sheath: cordura
Note: -

Collini Cutlery is the official distributor of MCUSTA Japanese knives for Italy

Intended use: sports / collection

Type of production: industrial cutting - craft assembly and finishing
Production Lama: Japan
Blade: VG-10 stainless steel at 59 / 60HRC
Handle: Micarta
Blade length: 95mm.
Blade thickness: 3mm.
Length closed: 115mm.
Total length: 207mm.
Thick when closed: 17.5mm.
Weight: 100g.
Closure: Liner Lock
Clip: in stainless steel
Packaging: cardboard box with Mcusta logos
Note: -

Who could have imagined that the Praetorian would conquer the knife world and become a design icon? That was the predetermined size of the design, but someone still wasn't okay with it...so here is the Praetorian Genesis, designed for the for the middle-of-the-road fanatics The Praetorian Genesis is a little smaller than the original, but retains more of a tough-guy look than ever before not scaring off the fearful, but still big enough for any task!

Intended Use: Sporty / EDC

Type of production: Mid-Tech
Country of manufacture: USA
Blade: CPM-S45VN steel
Blade finish: Dual Tone Tumbled & Satin
Handle: Blue Anodized Titanium with "Silver Peaks Warp Speed" artwork
Blade Length: 92mm.
Blade thickness: 5.5mm.
Length closed: 118mm.
Total length: 202mm.
Thickness when closed: 13mm.
Weight: 190g.
Closure system: Frame Lock
Clip: satin-finished titanium, removable
Packaging: cardboard box with Medford logos, plastic box with Medford logos, stickers and morale patch
Notes: "Loyalty" discounts are not active on this item.

The Medford Micro Praetorian T is the smallest of Medford's knife line, but no less capable. Although in Ancient Rome they were primarily charged with the defense of the Emperor, the Praetorian Guard was entrusted with a wide range of responsibilities, from fighting fires to protecting imperial interests. The Medford Micro Praetorian T, like its modern cousins and its ancient namesake, can be used for a myriad of tasks, from self-defense to everyday cutting tasks. With its titanium handle and wide, super-strong blade, the Micro Praetorian T is an EDC option that will last a lifetime without taking up too much pocket space.

Intended Use: Sporting / EDC

Production Type: Mid-Tech
Country of manufacture: USA
Blade: CPM-S45VN steel
Blade finish: Vulcan DP PVD
Handle: Bronze Anodized Titanium with "Stained Glass" artwork and bronzed hardware
Blade length: 75mm.
Blade thickness: 5.5mm.
Length closed: 98mm.
Total length: 172mm.
Thickness when closed: 13mm.
Weight: 134g.
Locking system: frame lock
Clip: titanium, removable
Packaging: cardboard box with Medford logos, plastic box with Medford logos, stickers and morale patch
Notes: "Loyalty" discounts are not active on this item.

With a blade just over 3mm thick and a titanium handle that is 11mm thick overall, this turns out to be one of our most pocket-friendly EDC knives, opening up a whole new market segment for us: the business class. These are customers who want to carry a Medford in their dress pants, lingerie, holster or purse, but when opened have the same familiarity as the sturdier Medfords. These are true EDC knives, highly portable and reliable!

Intended Use: Sporting / EDC

Type of production: Mid-Tech
Country of manufacture: USA
Blade: CPM-MagnaCut steel
Blade finish: Tumbled & Satin
Handle: handcrafted flamed titanium
Blade length: 93mm.
Blade thickness: 3mm.
Length closed: 110mm.
Total length: 201mm.
Thickness when closed: 11mm.
Weight: 115g.
Locking system: frame lock
Clip: titanium, removable
Packaging: cardboard box with Medford logos, plastic box with Medford logos, stickers and morale patch
Notes: "Loyalty" discounts are not active on this item.

The Theseus, named after the hero who defeated the Minotaur in ancient Greek mythology, is constructed in true Medford style. It features a tumbled D2 steel blade with stepped thumb groove and extended tang to facilitate quick one-handed use. A massive titanium handle with stainless steel spacer with lanyard hole and a unique pocket clip machined from billet complete the job.

Intended Use: Sporty

Type of production: Mid-Tech
Country of manufacture: USA
Blade: D2 steel
Blade finish: Tumbled & Satin
Handle: anodized titanium with flamed hardware
Blade length: 95mm.
Blade thickness: 5.5mm.
Length closed: 120mm.
Total length: 210mm.
Thickness when closed: 17mm.
Weight: 237g.
Closure system: Frame Lock
Clip: flamed titanium, removable
Packaging: cardboard box with Medford logos, plastic box with Medford logos, stickers and morale patch
Notes: "Loyalty" discounts are not active on this item.

Smooth Criminal... our first aluminum-framed, anodized, button-lock knife with a CPM-S35VN blade, at a price that changed our minds. All this while maintaining our high standards: 100% American made with all the Medford Knife & Tool attributes you expect!

Intended Use: Sporting

Type of production: Mid-Tech
Country of manufacture: USA
Blade: Stainless steel CPM-S35VN
Blade finish: Tumbled / Stonewashed
Handle: PVD aluminum
Blade length: 80mm.
Blade thickness: 4mm.
Length closed: 102mm.
Total length: 179mm.
Thickness when closed: 14mm.
Weight: 106g.
Closure system: button lock
Clip: titanium, removable and reversible
Packaging: cardboard box with Medford logos, zipper pouch, stickers and morale patch
Notes: "Loyalty" discounts are not active on this item.

Smooth Criminal... our first aluminum-framed, anodized, button-lock knife with CPM-S35VN blade, at a price that changed our minds. All this while maintaining our high standards: 100% American made with all the Medford Knife & Tool attributes you expect!

Intended Use: Sporting/Tactical

Production Type: Mid-Tech
Country of Production: USA
Blade: stainless steel CPM-S35VN
Blade finish: PVD
Handle: PVD aluminum
Blade length: 80mm.
Blade thickness: 4mm.
Length closed: 102mm.
Total length: 179mm.
Thickness when closed: 14mm.
Weight: 106g.
Closure system: button lock
Clip: PVD titanium, removable and reversible
Packaging: cardboard box with Medford logos, zipper pouch, stickers and morale patch
Notes: "Loyalty" discounts are not active on this item.

Extremely limited edition Platinum Label series folding knife with Mokume damascus blade and heads produced in only 20 examples each with a different coloration of the wood briar. Each specimen is therefore unique and differs from the previous one.

Intended use: collection

Type of production: industrial cutting - craftsmanship, assembly and finishing
Country of production: Seki - Japan
Blade: made of Mokume stainless steel with VG-10 cutting edge, forged with rainbow damascus rolling, achieved through layers of stainless steel, copper and brass and hammered through Tsuchime technique
Handle: made of Mokume stainless damask steel and wood briar
Blade length: 80mm.
Blade thickness: 3mm.
Length closed: 110mm.
Total length: 195mm.
Thickness when closed: 14mm.
Weight: 208g.
Closure: Liner Lock
Clip: handcrafted, removable and reversible, hammered stainless steel
Packaging: wooden box with Mcusta logos
Notes: Special and Limited Edition made in only 20 pieces for the Blade Show in Atlanta 2022

Intended Use: Tactical/Collection

Type of Production: Midtech
Country of Production: USA
Blade: D2 steel
Blade Finish: Black PVD
Handle: G10 and Titanium with Custom Bronze Finish anodizing
Blade Length: 90mm.
Blade thickness: 5mm.
Total Length: 190mm.
Thickness when closed: 12.5mm.
Balance: on the guard branch
Weight: 168g.
Locking mechanism: frame lock
Clip: titanium
Packaging: polymer tactical case with Medford logos
Notes: designed and built by Greg Medford

Knife withdrawn from a private collection in excellent condition, uniquely has a small imperfection on the wood at the base of the handle (visible in the close up of the photos) - Complete with original box - Checked and certified by our in-house Coltelleria Collini laboratory.

The SHINRA MAXIMA series uses the sintered and cryogenically hardened Japanese steel SPG2 in 3-layer laminate, one of the best ever produced in Japan

Intended use: sports / collection

Type of production: industrial cutting - handcrafted assembly and finishing
Production Lama: Japan
Blade: 61 / 62HRC SPG-2 stainless steel in three-layer San Mai laminate
Handle: Pakka Wood
Blade length: 95mm.
Blade thickness: 3mm.
Closed length: 115mm.
Total length: 207mm.
Thick when closed: 17.5mm.
Weight: 100g.
Closure: Liner Lock
Clip: in stainless steel
Packaging: cardboard box with Mcusta logos
Note: -

For more information on the steel used, you can visit the website: www.collinisteel.com

Intended use: Tactical / EDC

Type of production: semi artisanal
Country of production: USA
Blade: CPM-S35V steel
Blade treatment: Black PVD
Handle: anodized titanium with a thickness of 3.5mm per folder
Blade length: 75mm.
Blade thickness: 4.5mm.
Closed length: 97mm.
Total length: 170mm.
Thick when closed: 12.5mm.
Balancing: backward
Weight: 142g.
Opening: Ambidextrous thumbstood on the blade
Washers: in brass
Closure: Framelock
Clip: in titanium, removable
Packaging: tactical case in polymer with Medford logos
Notes: Skull Crasher on Shank - Designed and built by Greg Medford

Extremely limited edition Yatagarasu MCUSTA folding knife of the Shinwa series, with Mokume blade and produced in only 100 pieces.

Yatagarasu, in Japanese culture, is a three-legged crow symbol of driving owned by the Sun goddess Amaterasu. Yatagarasu appears in ancient Japanese documents, such as Kojiki (古 事 記), in which it is also said that he fought and killed a beast intending to devour the Sun, and that he is also the protector of the emperor Jimmu.
On many occasions, in Japanese art this creature is represented with three legs, although in Kojiki it is never said that the Yatagarasu has more than two. Today, the three-legged version of the Yatagarasu is used as a symbol of the football federation of Japan.

Intended use: collection

Type of production: industrial cutting - craftsmanship, assembly and finishes
Lama production: Japan
Blade: stainless steel Mokume Damascus - Aogami (blue steel) forged with lamination of rainbow Damascus, obtained thanks to layers of stainless steel, copper and brass and with black hammering through the Tsuchime technique
Handle: in stainless damask with dark purple corian insert and copper and gold inlays
Blade length: 80mm.
Blade thickness: 3mm.
Length closed: 110mm.
Total length: 195mm.
Thick when closed: 14mm.
Weight: 141g.
Closure: Liner Lock
Clip: -
Packaging: wooden box with Mcusta logos
Notes: limited edition 100 pieces

For more information on the steel used you can view the site: www.collinisteel.com

Collini Cutlery is the official distributor for Italy of the Japanese MCUSTA knives

The SHINRA MAXIMA series uses Japanese sintered and cryogenically hardened SPG2 in 3-layer laminate, one of the best ever produced in Japan

Intended use: sports / collection

Type of production: industrial cut - assembly and handmade finishes
Lama production: Japan
Blade: 61 / 62HRC SPG-2 stainless steel in three-layer San Mai laminate
Handle: Damascus
Blade length: 90mm.
Blade thickness: 3mm.
Length closed: 117mm.
Total length: 211mm.
Thick when closed: 17.5mm.
Weight: 170g.
Closure: Liner Lock
Clip: stainless steel
Packaging: cardboard box with Mcusta logos
Note: -

For more information on the steel used you can view the site: www.collinisteel.com

Collini Cutlery is the official distributor for Italy of the Japanese MCUSTA knives

The SHINRA MAXIMA series uses Japanese sintered and cryogenically hardened SPG2 in 3-layer laminate, one of the best ever produced in Japan

Intended use: sports / collection

Type of production: industrial cut - assembly and handmade finishes
Lama production: Japan
Blade: 61 / 62HRC SPG-2 stainless steel in three-layer San Mai laminate
Handle: Pakka wood
Blade length: 95mm.
Blade thickness: 3mm.
Length closed: 115mm.
Total length: 207mm.
Thick when closed: 17.5mm.
Weight: 100g
Closure: Liner Lock
Clip: stainless steel
Packaging: cardboard box with Mcusta logos
Note: -

For more information on the steel used you can view the site: www.collinisteel.com

Collini Cutlery is the official distributor for Italy of the Japanese MCUSTA knives

The SHINRA MAXIMA series uses Japanese sintered and cryogenically hardened SPG2 in 3-layer laminate, one of the best ever produced in Japan

Intended use: sports / collection

Type of production: industrial cut - assembly and handmade finishes
Lama production: Japan
Blade: 61 / 62HRC SPG-2 stainless steel in three-layer San Mai laminate
Handle: Micarta
Blade length: 90mm.
Blade thickness: 3mm.
Length closed: 117mm.
Total length: 211mm.
Thick when closed: 17.5mm.
Weight: 105g.
Closure: Liner Lock
Clip: stainless steel
Packaging: cardboard box with Mcusta logos
Note: -

For more information on the steel used you can view the site: www.collinisteel.com

Collini Cutlery is the official distributor for Italy of the Japanese MCUSTA knives

Intended use: dirty / collection

Type of production: industrial cut - assembly and handmade finishes
Blade: SPG2 61 / 62HRC
Blade treatment: -
Lama production: Japan
Handle: damask steel and pakka wood
Blade length: 70mm.
Blade thickness: 3mm.
Length closed: 96mm.
Total length: 166mm.
Balancing: -
Weight: 96g.
Closure: Liner Lock
Clip: -
Sheath: cordura
Note: -

Intended use: Tactical / EDC

Type of production: Midtech
Country of production: USA
Blade: CPM-S35VN stainless steel
Blade treatment: Black PVD
Handle: anodized aluminum
Blade thickness: 4mm.
Length closed: 100mm.
Total length: 175mm.
Thick when closed: 14mm.
Weight: 104g.
Opening: through Carson Flipper system
Closure: Button Lock
Clip: titanium, removable, with Black PVD treatment
Packaging: cardboard box with Medford logos
Note: -

Intended use: Tactical / Heavy Duty

Type of production: Midtech
Country of production: USA
Blade: CPM-S35VN stainless steel
Blade treatment: Black PVD
Handle: Titanium with bronze anodizing and black PVD shank
Blade length: 106mm.
Blade thickness: 5mm.
Length closed: 132mm.
Total length: 238mm.
Thick when closed: 15mm.
Weight: 172g.
Opening: through the Karst pinball system
Closing: Framelock in titanium
Clip: titanium, removable, flamed
Packaging: polymer tactical case with Medford logos
Notes: Designed and built by Greg Medford

Collini Cutlery is the official distributor of MCUSTA Japanese knives for Italy

Intended use: sports / collection

Type of production: industrial cutting - craft assembly and finishing
Blade: in SanMai steel with VG-10 stainless steel cutting edge at 59 / 60HRC and outer cheeks in 33-layer nickel damask
Production Lama: Japan
Handle: Iron Wood
Blade length: 70mm.
Blade thickness: 3mm.
Length closed: 95mm.
Total length: 167mm.
Balancing: -
Weight: 66g.
Closure: Liner Lock
Clip: -
Sheath: fabric bag
Note: -

Collini Cutlery is the official distributor of MCUSTA Japanese knives for Italy

Intended use: sports / collection

Type of production: industrial cutting - craft assembly and finishing
Production Lama: Japan
Blade: in damask laminated and hammered stainless steel with cutting edge in VG-10 at 59 / 60HRC
Handle: Stainless Steel
Blade length: 85mm.
Blade thickness: 3mm.
Length closed: 112mm.
Total length: 192mm.
Thick when closed: 8mm.
Weight: 114g.
Closure: Frame Lock
Clip: in stainless steel
Packaging: cardboard box with Mcusta logos
Note: -

Collini Cutlery is the official distributor of MCUSTA Japanese knives for Italy

The Sengoku series uses 3-layer SPG2 sintered and cryogenically hardened Japanese steel, one of the best ever produced in Japan

Intended use: sports / collection

Type of production: industrial cutting - craft assembly and finishing
Production Lama: Japan
Blade: in SPG-2 stainless steel at 61 / 62HRC in San Mai three-layer laminate
Handle: Iron Wood
Blade length: 95mm.
Blade thickness: 3mm.
Length closed: 115mm.
Total length: 207mm.
Thick when closed: 17.5mm.
Weight: 100g.
Closure: Liner Lock
Clip: in stainless steel
Packaging: cardboard box with Mcusta logos
Note: -

For more information on the steel used, you can view the site: www.collinisteel.com

Collini Cutlery is the official distributor of MCUSTA Japanese knives for Italy

The Sengoku series uses 3-layer SPG2 sintered and cryogenically hardened Japanese steel, one of the best ever produced in Japan

Intended use: sports / collection

Type of production: industrial cutting - craft assembly and finishing
Production Lama: Japan
Blade: in SPG-2 stainless steel at 61 / 62HRC in San Mai three-layer laminate
Handle: Corian
Blade length: 95mm.
Blade thickness: 3mm.
Length closed: 115mm.
Total length: 207mm.
Thick when closed: 17.5mm.
Weight: 100g.
Closure: Liner Lock
Clip: in stainless steel
Packaging: cardboard box with Mcusta logos
Note: -

For more information on the steel used, you can view the site: www.collinisteel.com

Collini Cutlery is the official distributor of MCUSTA Japanese knives for Italy

The Sengoku series uses 3-layer SPG2 sintered and cryogenically hardened Japanese steel, one of the best ever produced in Japan

Intended use: sports / collection

Type of production: industrial cutting - craft assembly and finishing
Production Lama: Japan
Blade: in SPG-2 stainless steel at 61 / 62HRC in San Mai three-layer laminate
Handle: Micarta
Blade length: 95mm.
Blade thickness: 3mm.
Length closed: 115mm.
Total length: 207mm.
Thick when closed: 17.5mm.
Weight: 100g.
Closure: Liner Lock
Clip: in stainless steel
Packaging: cardboard box with Mcusta logos
Note: -

For more information on the steel used, you can view the site: www.collinisteel.com

Collini Cutlery is the official distributor of MCUSTA Japanese knives for Italy

The Sengoku series uses 3-layer SPG2 powder steel and cryogenically hardened Japanese steel, one of the best ever produced in Japan

Intended use: sports / collection

Type of production: industrial cutting - craft assembly and finishing
Production Lama: Japan
Blade: stainless steel SPG-2 at 61 / 62HRC
Handle: Pakka Wood
Blade length: 93mm.
Blade thickness: 3mm.
Length closed: 117mm.
Total length: 210mm.
Thick when closed: 17.5mm.
Weight: 120g.
Closure: Liner Lock
Clip: -
Packaging: cardboard box with Mcusta logos
Notes: cordura sheath and leather

Intended use: sporting/collection

Type of production: industrial cut - handcrafted assembling and finishing
Blade production: Japan
Blade: SPG-2 stainless steel at 61/62HRC in three layers San Mai laminate
Handle: Micarta
Blade length: 93mm.
Blade thickness: 3mm.
Length closed: 117mm.
Total length: 210mm.
Thickness when closed: 17.5mm.
Weight: 120g.
Closure: Liner Lock
Clip: -
Package: cardboard box with Mcusta logos
Notes: Cordura and leather sheath

Intended use: Tactical / EDC

Type of production: artisan seeds
Country of production: U.S.A.
Blade: in S35VN steel
Blade treatment: satin finish
Handle: lighting
Blade thickness: 4mm.
Length closed: 100mm.
Total length: 175mm.
Thick when closed: 14mm.
Balancing: set back
Weight: 104g.
Opening: pinball
Washers: in brass
Closure: button lock
Clip: titanium, removable
Packaging: in cardboard with Medford logos
Note: -

modern version of the classic USMC produced by Medford

Intended use: Tactical / Collection

Type of production: Custom
Lama production: U.s.a
Blade: S35VN steel
Blade treatment: S35VN
Handle: G10 3-D surfaced multi-colored
Blade length: 165mm.
Blade thickness: 6.5mm.
Total length: 290mm.
Balancing: set back 1.5 cm on the guard branch
Weight: 488g.
Sheath: custom in leather
Packaging: nylon case, with zip closure and Medford logos
Notes: Designed and built by Greg Medford

Intended use: Tactical / Collection

Type of production: Custom
Lama production: U.s.a
Blade: CPM-S35VN steel
Blade treatment: Tumbled
Handle: titanium
Blade length: 55mm.
Blade thickness: 5mm.
Total length: 135mm.
Thick when closed: 10mm.
Balancing: on the guard branch
Weight: 86g.
Closure: Frame Lock
Clip: in titanium
Sheath: -
Packaging: polymer tactical case with Medford logos
Notes: Designed and built by Greg Medford

Intended use: EDC

Type of production: artisan seeds
Country of production: U.S.A.
Blade: CPM-S35VN steel
Blade treatment: Satin finish
Handle: anodised titanium with PVD treatment
Blade length: 90mm.
Blade thickness: 3mm.
Closed length: 108mm.
Total length: 200mm.
Thick when closed: 10.2mm.
Balancing: set back
Weight: 114g.
Opening: ambidextrous thumbstood on the blade
Washers: in brass
Closure: Framelock
Clip: titanium, removable
Packaging: polymer tactical case with Medford logos
Notes: Skull Crasher on the shank - Designed and built by Greg Medford

Collini Cutlery is the official distributor for Italy of MCUSTA Japanese knives

Destination of use: sport / collection

Type of production: industrial cutting - assembly and artisan finishes
Lama production: Japan
Blade: in laminated stainless steel damascus with cutting edge in VG-10 at 59 / 60HRC
Handle: wood
Blade length: 85mm.
Blade thickness: 3mm.
Length closed: 110mm.
Total length: 195mm.
Thick when closed: 12mm.
Weight: 78g.
Closure: Joint Slip
Clip: -
Packaging: cardboard box with Mcusta logos with fabric sheath
Note: -

Purpose: EDC

Type of production: artisanal seed
Country of Origin: USA
Blade: D2 steel
Blade Treatment: Dual Tone - Stone Washed and Satin
Handle: Anodized titanium with a thickness of 3mm per folder
Blade Length: 65mm.
Blade thickness: 3mm.
Closed length: 78mm.
Total length: 142mm.
Closed thickness: 9.5mm.
Balancing: backward
Weight: 62g.
Opening: thumbstood ambidextrous on the blade
Washers: Brass
Closure: Framelock
Clip: Titanium, Removable
Packing: Tactical Polycarbonate Case with Medford logos
Notes: Skull Crasher on the Tail - Drawn and built by Greg Medford - free cartoon

Intended use: Tactical / EDC

Type of production: artisanal seed
Country of Origin: USA
Blade: D2 steel
Blade Treatment: Black PVD
Handle: Anodized titanium
Blade Length: 75mm.
Blade thickness: 4.5mm.
Closed length: 97mm.
Total Length: 170mm.
Closed thickness: 12.5mm.
Balancing: backward
Weight: 142g.
Opening: thumbstood ambidextrous on the blade
Washers: Brass
Closure: Framelock
Clip: Titanium, Removable
Packing: Tactical Polycarbonate Case with Medford logos
Notes: Skull Crasher on the Tail - Designed and built by Greg Medford - Free Comic Book

Intended use: Tactical / Heavy Duty

Type of production: semi custom
Country of Origin: USA
Blade: D2 steel
Blade Treatment: Black PVD
Handle: G10 and anodized titanium
Blade Length: 90mm.
Blade thickness: 5mm.
Closed length: 115mm.
Total length: 200mm.
Closed thickness: 12.5mm.
Balancing: on guard branch
Weight: 168g.
Opening: thumbstood ambidextrous on the blade
Washers: Brass
Closure: Framelock
Clip: Titanium, Removable
Packing: Tactical Polycarbonate Case with Medford logos
Notes: Skull Crasher on the Tail - Designed and built by Greg Medford - Free Comic Book

Intended Use: sport / collection

Type of production: Industrial cutting - assembly and handcrafted finishes
Production Lama: Japan
Blade: stainless steel sanmai with sharp VG-10 to 59 / 60HRC and External cheeks damask nickel to 33 layers
Handle: Micarta
Blade length: 93mm.
Blade thickness: 3mm.
Closed Length: 117mm.
Overall length: 210mm.
Thick when closed: 17.5mm.
Weight: 120g.
Lock: Liner Lock
Clips: stainless steel
Packaging: cardboard box with logos Mcusta
Notes: Cordura sheath and leather

Mcusta - Sengoku VG10 knife - MC-0181 Oda Nobunaga - knife

Intended Use: sport / collection

Type of production: Industrial cutting - assembly and handcrafted finishes
Production Lama: Japan
Blade: Stainless Steel VG-10 to 59 / 60HRC
Handle: Black Micarta
Blade length: 93mm.
Blade thickness: 3mm.
Closed Length: 117mm.
Overall length: 210mm.
Thick when closed: 17.5mm.
Weight: 120g.
Lock: Liner Lock
Clips: stainless steel
Packaging: cardboard box with logos Mcusta
Notes: Cordura sheath and leather

Mcusta - Sengoku Damascus knife - MC-0181D Oda Nobunaga - knife

Intended Use: sport / collection

Type of production: Industrial cutting - assembly and handcrafted finishes
Production Lama: Japan
Blade: stainless steel sanmai with sharp VG-10 to 59 / 60HRC and External cheeks damask nickel to 33 layers
Handle: Black Micarta
Blade length: 93mm.
Blade thickness: 3mm.
Closed Length: 117mm.
Overall length: 210mm.
Thick when closed: 17.5mm.
Weight: 120g.
Lock: Liner Lock
Clips: stainless steel
Packaging: cardboard box with logos Mcusta
Notes: Cordura sheath and leather

Intended use: Sports / Collection

Type of production: Industrial cutting - assembly and handcrafted finishes
Production Lama: Japan
Blade: sanmai sharp stainless steel with VG-10 59 / 60HRC and External cheeks damask nickel to 33 layers
Blade treatment: -
Handle: Corian
Blade length: 87mm.
Blade Thickness: 3mm.
Closed Length: 110mm.
Overall length: 193mm.
Balancing: -
Weight: 98g.
Lock: Liner Lock
Clip: Steel
Sheath: -
Notes: -

Micro Praetorian G / T Desert D2 - knife

Intended use: Tactical / Collection

Production Type: Custom
Production Lama: US
Blade: Stainless Vulcan D2
Blade treatment: -
Handle: Titanium and G10 Desert
Blade length: 70mm.
Blade thickness: 5mm.
Overall length: 170mm.
Thick when closed: 12.5mm.
Balance: the branch guard
Weight: 120g.
Closure: Frame Lock
Clip: Titanium
Sheath: -
Packaging: case tactic polymers with logos Medford
Notes: Designed and built by Greg Medford

Mcusta - Series Katana - MC-0041C - knife

Intended use: sports / collection

Type of production: industrial cutting - assembly and handcrafted finishes
Production Lama: Japan
Blade: laminated steel with sharp VG-10 to 59/60 HRC
Handle: Aluminum
Blade length: 80mm.
Blade thickness: 3mm.
Closed Length: 110mm.
Overall length: 194mm.
Thick when closed: 14mm.
Weight: 96g.
Lock: Liner Lock
Clip: Stainless Steel
Packaging: cardboard box with logos Mcusta
Notes: -

Collini Cutlery is the official distributor of MCUSTA Japanese knives for Italy

The Sengoku series uses 3-layer SPG2 powder steel and cryogenically hardened Japanese steel, one of the best ever produced in Japan

Intended use: sports / collection

Type of production: industrial cutting - craft assembly and finishing
Production Lama: Japan
Blade: stainless steel SPG-2 at 61 / 62HRC
Handle: Pakka Wood
Blade length: 93mm.
Blade thickness: 3mm.
Length closed: 117mm.
Total length: 210mm.
Thick when closed: 17.5mm.
Weight: 120g.
Closure: Liner Lock
Clip: -
Packaging: cardboard box with Mcusta logos
Notes: -

Mcusta - Basic Series Rosewood - MC-0014R - knife

Intended use: Sport

Type of production: Industrial
Production Lama: Japan
Blade: Stainless VG-10
Treatment Lama: Satin
Handle: Rosewood wood
Blade length: 85mm.
Blade thickness: 3mm.
Closed Length: 110mm.
Overall length: 190mm.
Thick when closed: 15mm.
Balancing: -
Weight: 96g.
Lock: Liner Lock
Clip: Stainless Steel
Sheath: -
Packing: brown cardboard box with logos Mcusta
Notes: -

Mcusta - Turo Take Dark Wood Money Clip MC-0151 Japan - knife

Intended use: sports / collection / money clip

Type of production: industrial cutting - assembly and handcrafted finishes
Blade: AUS-8 stainless
Production Lama: Japan
Handle material: steel and ebony
Blade length: 55mm.
Blade Thickness: 2mm.
Closed Length: 76mm.
Overall length: 135mm.
Balancing: -
Weight: 34g.
Closure: Slip joint
Clip: present
Sheath: -
Notes: -

Mcusta - Susu-Take Money Clip MC-0152 Japan - knife

Intended use: sports / collection / money clip

Type of production: industrial cutting - assembly and handcrafted finishes
Blade: AUS-8 stainless
Production Lama: Japan
Handle: Steel and Red pakkawood
Blade length: 55mm.
Blade Thickness: 2mm.
Closed Length: 76mm.
Overall length: 135mm.
Balancing: -
Weight: 34g.
Closure: Slip joint
Clip: present
Sheath: -
Notes: -

Mcusta - Tsuchi Green - MC-163D - knife

Type of production: industrial cutting - assembly and handcrafted finishes 

Production Lama: Japan
Blade: Damascus steel rolled and hammered with sharp VG-10 to 59/60 HRC
Handle: Aluminum
Blade length: 85mm.
Blade thickness: 3mm.
Closed Length: 110mm.
Overall length: 190mm.
Thick when closed: 14mm.
Weight: 94g.
Lock: Liner Lock
Clip: Stainless Steel
Packaging: cardboard box with logos Mcusta
Notes: -

Cutlery Collini is the official distributor for Italy of Japanese knives Mcusta

Intended use: sports / collection

Type of production: industrial cutting - assembly and handcrafted finishes
Blade: Stainless sanmai with sharp steel VG-10 to 59/60 HRC and cheeks outside Damascus nickel to 33 layers
Production Lama: Japan
Handle material: stainless steel
Blade length: 70mm.
Blade Thickness: 3mm.
Closed Length: 95mm.
Overall length: 164mm.
Balancing: -
Weight: 90g.
Lock: Liner Lock
Clip: -
Sheath: Belt, Nylon, with traditional motifs
Notes: -

Cutlery Collini is the official distributor for Italy of Japanese knives Mcusta

Intended use: sports / collection

Type of production: industrial cutting - assembly and handcrafted finishes
Blade: Stainless sanmai with sharp steel VG-10 to 59/60 HRC and cheeks outside Damascus nickel to 33 layers
Production Lama: Japan
Handle material: stainless steel
Blade length: 70mm.
Blade Thickness: 3mm.
Closed Length: 95mm.
Overall length: 164mm.
Balancing: -
Weight: 90g.
Lock: Liner Lock
Clip: -
Sheath: Belt, Nylon, with traditional motifs
Notes: -

Medford Knife and Tools - NAV-T Tactical Coyote - knife

Intended use: Tactical / Collection

Type of production: Custom
Production Lama: Use
Blade: Stainless D2
Treatment Lama: -
Handle material: paracord woodland
Blade length: 95mm.
Blade thickness: 6.5mm.
Overall length: 230mm.
Balancing: on the branch of guard
Weight: 330g.
Sheath: kydex coyote
Packing: Nylon pouch with zipper and logos Medford
Notes: Designed and built by Greg Medford

Intended use: Tactical / Collection

Type of production: Custom
Lama production: Use
Blade: CPM-S35VN steel
Blade treatment: -
Handle: titanium and G10 Digital Green
Blade length: 70mm.
Blade thickness: 5mm.
Total length: 170mm.
Thick when closed: 12.5mm.
Balancing: on the guard branch
Weight: 120g.
Closure: Frame Lock
Clip: in titanium
Sheath: -
Packaging: polymer tactical case with Medford logos
Notes: Designed and built by Greg Medford

Mcusta - Ao-Take Money Clip MC-0154 - knife

Collini Cutlery is the official distributor for Italy of Japanese knives Mcusta

Intended Use: Sport / collection / money clip

Type of production: industrial cutting - assembly and handcrafted finishes
Blade: steel AUS-8
Blade Production: Japan
Handle material: stainless steel and green micarta
Blade length: 55mm.
Blade Thickness: 2mm.
Closed Length: 76mm.
Overall length: 135mm.
Balancing: -
Weight: 34g.
Closure: Slip joint
Clip this
Sheath: -
Notes: -

Mcusta - Jazz Knife Damascus Cocobolo Ebony African MC-0171D - knife

Collini Cutlery is the official distributor for Italy of Japanese knives Mcusta

Intended use: sporivo / collection

Type of production: industrial cutting - assembly and handcrafted finishes
Blade: VG-10 59/60HRC
Treatment Blade: -
Blade Production: Japan
Handle: wood cocobolo and ebony wood african with steel insert
Blade length: 80mm.
Blade Thickness: 3mm.
Closed Length: 110mm.
Overall length: 193mm.
Balancing: -
Weight: 90g.
Lock: Liner Lock
Clip this
Sheath: Cordura
Notes: -

Coltelleria Collini is the official distributor for Italy of the Japanese MCUSTA knives

Intended use: dirty / collection

Type of production: industrial cut - assembly and handmade finishes
Blade: SPG2 61 / 62HRC
Blade treatment: -
Lama production: Japan
Handle: satin steel and wooden insert
Blade length: 70mm.
Blade thickness: 3mm.
Length closed: 96mm.
Total length: 168mm.
Balancing: -
Weight: 82g.
Closure: Liner Lock
Clip: present
Sheath: cordura
Note: -

Mcusta - Riple knife - MC-0142 - knife

Collini Cutlery is the official distributor for Italy of Japanese knives Mcusta

Intended use: sporivo / collection

Type of production: industrial cutting - assembly and handcrafted finishes
Blade: VG-10 59/60HRC
Treatment Blade: -
Blade Production: Japan
Handle material: stainless steel satin and ebony inlay
Blade length: 70mm.
Blade Thickness: 3mm.
Closed Length: 96mm.
Overall length: 166mm.
Balancing: -
Weight: 86g.
Lock: Liner Lock
Clip: -
Sheath: Cordura
Notes: -

Mcusta - Mari Damascus Japan - MC-0036D - knife

Collini Cutlery is the official distributor for Italy of Japanese knives Mcusta

Intended Use: Sport / collection

Type of production: industrial cutting - assembly and handcrafted finishes
Blade: Stainless steel sanmai with sharp VG-10 to 59/60HRC cheeks and external nickel damascus 33 layers
Blade Production: Japan
Handle: damascus steel
Blade length: 70mm.
Blade Thickness: 3mm.
Closed Length: 95mm.
Overall length: 164mm.
Balancing: -
Weight: 84g.
Lock: Liner Lock
Clip: -
Sheath: -
Notes: -

Mcusta - Gentleman Folder Damascus Japan - MC-0052D - knife

Intended Use: Sport / collection

Type of production: industrial cutting - assembly and handcrafted finishes
Blade: Stainless steel sanmai with sharp VG-10 to 59/60HRC cheeks and external nickel damascus 33 layers
Blade Production: Japan
Handle material: G10
Blade length: 70mm.
Blade Thickness: 3mm.
Closed Length: 95mm.
Overall length: 167mm.
Balancing: -
Weight: 66g.
Lock: Liner Lock
Clip: -
Sheath: -
Notes: -

Collini Cutlery is the official distributor of MCUSTA Japanese knives for Italy

Intended use: sports / collection

Type of production: industrial cutting - craft assembly and finishing
Production Lama: Japan
Blade: in SanMai steel with VG-10 stainless steel cutting edge at 59 / 60HRC and outer cheeks in 33-layer nickel damask
Handle: cocobolo wood
Blade length: 95mm.
Blade thickness: 3mm.
Length closed: 115mm.
Total length: 207mm.
Thick when closed: 17.5mm.
Weight: 100g.
Closure: Liner Lock
Clip: in stainless steel
Packaging: cardboard box with Mcusta logos
Note: -

Intended use: sports / collection

Type of production: industrial cutting - craft assembly and finishing
Production Lama: Japan
Blade: in damask laminated and hammered stainless steel with cutting edge in VG-10 at 59 / 60HRC
Handle: Stainless Steel
Blade length: 85mm.
Blade thickness: 3mm.
Length closed: 112mm.
Total length: 192mm.
Thick when closed: 8mm.
Weight: 114g.
Closure: Frame Lock
Clip: in stainless steel
Packaging: cardboard box with Mcusta logos
Note: -

Intended Use: Sport / collection

Type of production: industrial cutting - assembly and handcrafted finishes
Blade Production: Japan
Blade: damascus steel laminate and hammered with sharp VG-10 to 59/60HRC
Handle: Aluminum
Blade length: 85mm.
Blade thickness: 3mm.
Closed Length: 110mm.
Overall length: 190mm.
Thick when closed: 14mm.
Weight: 94g.
Lock: Liner Lock
Clip: Stainless Steel
Packaging: cardboard box with logos Mcusta
Notes: -