Knives, collection knife, tactical knives, outdoor knives, pocket knives and tools

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased.
* Condition: Overall in very good condition.
* Commercially available: still in production.
* Sharpening: Professionally re-sharpened.
* Marks on blade: None
* Marks on handle: a few small marks on clip, hardware, and aluminum spacer
* Box: Absent
* Scabbard: /
* Manuals, Certificates and Warranties: Absent
* Checked and Certified by our in-house laboratory

Intended Use: Tactical

Production type: Industrial
Country of Production: Italy
Blade: N690Co 58HRC steel with Grade 5 titanium back (49-50HRC)
Blade finish: stonewashed
Handle: G10
Blade length: 91mm.
Blade thickness: 5mm.
Length closed 127mm.
Total length: 216mm.
Thickness when closed: 25mm.
Balance: Backward, 3cm from the top of the guard.
Weight: 186g.
Latch: Liner Lock, with manual insertion safety
Clip: Stainless steel, reversible
Notes: previously purchased knife, withdrawn from private collection

Exclusive limited edition series in collaboration with INSTRUCTOR ZERO (Team Zero International Training Security Company), renowned firearms training specialist, risk analyst and strategic consultant working worldwide for both military and law enforcement specialized units and government agencies.

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Provenance: withdrawn from private collection, previously purchased.
* Condition: New, never used
* Commercially available: Discontinued, limited run of only 33 numbered pieces
* Sharpening: Factory sharpened
* Marks on blade: None
* Marks on handle: None
* Box: Present
* Scabbard: /
* Manuals, Certificates and Warranties: Present
* Checked and Certified by our in-house laboratory

Intended Use: Tactical / Collection

Production type: Industrial
Country of Production: Italy
Blade: Stainless steel N690Co 58HRC
Blade Treatment: Testudo MIL-C-13924
Handle: Anticorodal
Blade Length: 68mm.
Blade thickness: 4mm.
Length closed: 110mm.
Total length: 181mm.
Thickness when closed: 23mm. (15mm without clip)
Weight: 139g.
Closure: Liner Lock with additional safety catch
Clip: Stainless Steel
Packaging: watertight plastic box with Extrema Ratio and Team Zero logos, Warranty Certificate, Velcro Patch, Limited edition made in only 33 pieces

The GLAUCA B1 folding knife was born from the collaboration with the GIGN (special unit of the French National Gendarmerie). It has a tip designed to allow maximum penetration. On the back of the handle it features a stop strap cutting system.

It is equipped with a rear glass breaker, a clip that can be applied in three positions and a side safety device.

The rigid sheath is made of ABS applied to a Cordura base and allows you to store the knife with the blade open.

Allows multiple attachment options: MOLLE system for tactical vests, belt attachment and thigh attachment.

KNIFE RETIRED FROM PRIVATE COLLECTION

* Type: Previously Purchased
* Condition: Excellent condition
* Commercially available No
* Sharpness: Original
* Marks on blade: small scratches on the blade
* Marks on handle: NO
* Packaging: YES
* Sheath: YES
* Manuals, Certificates and Warranties: YES
* Checked and Certified by our internal laboratory

Type of production: Industrial
Country of production: Italy
Blade: N690Co stainless steel
Blade finish: Burnished
Handle: Rough Anticorodal
Blade length: 115mm.
Blade thickness: 4mm.
Closed length: 158mm
Total length: 268mm.
Closed thickness: 15mm.
Weight: 197g.
Closure: Liner Lock with Additional Safety
Clip: Removable and multi-position, in stainless steel
Sheath: Cordura and Kydex with magnetic blade retention
Packaging: Cardboard box with Extrema Ratio logos
Notes: supplied with the G.I.G.N. (National Gendarmerie Intervention Group) French, specialized in operations against terrorism and emergency response in the event of hostages

"The Italico was born almost on its own... Following the market novelties, which are always numerous, I thought of designing a folder that was very compact and that expressed solidity from the very first impact, once gripped. The salient features that had to be present were: an excellent grip, a prerogative I try to apply in all my designs, and a type of blade that was very usable even for heavy work, despite its small size. After the first sketches were made, the ITALICO was born." - ADG - Antonio Di Gennaro  

Intended Use: Sporting

Type of production: Industrial
Country of Production: Italy
Blade: stainless steel N690Co 59/61HRC
Blade finish: Black Top Shield
Handle: FNR (Fiberglass Reinforced Nylon)
Blade length: 60mm.
Blade thickness: 3mm.
Length closed: 90m.
Total length: 150mm.
Weight: 78g.
Closure: LinerLock
Clip: flush, AISI 302 stainless steel with PVD treatment, removable and reversible
Packaging: cardboard box with Fox Knives logos 
Notes: Design by ADG Antonio Di Gennaro - Ball bearing opening movement - Carson Flipper opening system

"The Italico was born almost on its own... Following the market novelties, which are always numerous, I thought of designing a folder that was very compact and that expressed solidity from the very first impact, once gripped. The salient features that had to be present were: an excellent grip, a prerogative I try to apply in all my designs, and a type of blade that was very usable even for heavy work, despite its small size. After the first sketches were made, the ITALICO was born." - ADG - Antonio Di Gennaro  

Intended Use: Sporting

Type of production: Industrial
Country of Production: Italy
Blade: stainless steel N690Co 59/61HRC
Blade finish: Black Top Shield
Handle: FNR (Fiberglass Reinforced Nylon)
Blade length: 60mm.
Blade thickness: 3mm.
Length closed: 90m.
Total length: 150mm.
Weight: 78g.
Closure: LinerLock
Clip: flush, AISI 302 stainless steel with PVD treatment, removable and reversible
Packaging: cardboard box with Fox Knives logos 
Notes: Design by ADG Antonio Di Gennaro - Ball bearing opening movement - Carson Flipper opening system

Extrema Ratio Caimano Nero N.A. Ranger XXV Anniversarium Limited Edition is a limited series version of only 250 pieces that preserves intact all the features of the famous Caimano Nero N.A. model, a non-automatic version of the tactical knife that Extrema Ratio delivered to the G.O.I. (Gruppo Operativo Incursori) of the Italian Navy.

The Extrema Ratio Caimano Nero N.A. Ranger XXV Anniversarium Limited Edition comes in an IP67-certified watertight Polypropylene technical case, with pressurization valve, weatherproof, dustproof and shockproof, inside of which is also an Extrema Ratio 25th Anniversary commemorative coin and metal plaque with the progressive number of the limited series.

Intended Use: Tactical/Military

Type of manufacture: industrial
Blade: stainless steel N690Co 58HRC
Country of Production: Italy
Handle: Anticorodal
Blade length: 93mm.
Blade thickness: 4mm.
Length closed: 140mm.
Total length: 231mm.
Weight: 180g.
Closure: Liner Lock with additional safety catch, when knife is open
Clip: deep pocket, reversible and removable, stainless steel
Notes: Limited edition made of only 250 pieces accompanied by polypropylene case and commemorative coin

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Overall in good condition.
* Commercially Available Available.
* Sharpening: Factory.
* Marks on blade: A couple of light marks on burnishing.
* Marks on handle: Slight signs of wear on hardware and clip.
* Box: Present, but not in perfect condition
* Scabbard: -
* Manuals, Certificates and Warranties: Present
* Checked and Certified by our in-house laboratory


Intended Use: Tactical/Sporting

Production Type: Industrial
Country of Production: Italy
Blade: Stainless steel N690Co 58HRC
Blade Finish: Burnishing MIL-C-13924
Handle: Anticorodal (aluminum)
Blade length: 68mm.
Blade thickness: 4mm.
Length closed: 110mm.
Total length: 181mm.
Thickness when closed: 15mm.
Weight: 139g.
Closure: Liner Lock, with additional safety catch
Clip: stainless steel removable and reversible
Packaging: cardboard box with Extrema Ratio logos

KNIFE RETIRED FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: In very good condition
* Commercially available NO
* Sharpness: Original
* Marks on blade: NO
* Marks on handle: NO
* Packaging: YES
* Checked and Certified by our internal laboratory

Type of production: Industrial
Country of production: Italy
Blade: in N690Co stainless steel
Finish: Testudo burnishing
Handle: Anodized aeronautical aluminum anticorodal
Blade length: 85mm.
Blade thickness: 2.5mm.
Total length: 210mm.
Weight: 152g.
Sheath: -
Packaging: Cardboard box with Extrema Ratio logos and manufacturer's certificates
Notes: emergency blade with snap opening (length. 8 cm) - glass breaker - model from 2013 now out of production

Ferrum T is a folding knife with a clear tactical connotation equipped with a spear point blade with lightening slot. It has a slim and compact shape, the two anodized anticorodal aluminum grips make up a light, slender and at the same time very resistant handle. It can be housed in a breast pocket, in small flashlight holsters or inside a single loop of the M.O.L.L.E. system.

Equipped with a flipper assisted opening system, the blade rotates on ball bearings which allow a smooth and uncertain movement of the blade. This mechanism allows the user to open the blade quickly and easily, even with just one hand. The locking system adopted is the well-tested liner lock. The reversible clip is positioned on the back.

Ferrum T is available in 2 versions: the first, FERRUM T Black Warfare, equipped with a black handle and Geotech Camo blade, the innovative and original Extrema Ratio camouflage pattern, created by laser engraving. The second, FERRUM T TACTICAL MUD, with anodized handle in the new gray-green color and blade with MIL-C-13924 bluing.

The reversible clip is positioned on the back.

Intended use: Tactical / EDC

Type of production: Industrial
Country of production: Italy
Blade: N690Co 58HRC stainless steel
Blade Finish: Black
Handle: Rough Anticorodal
Blade length: 73mm.
Blade thickness: 3mm.
Closed length: 90mm.
Total length: 184mm.
Weight: 86g.
Closure: Liner Lock
Clip: Removable and reversible, in stainless steel
Packaging: Cardboard box with Extrema Ratio logos
Note: -

Ferrum T is a folding knife with a clear tactical connotation equipped with a spear point blade with lightening slot. It has a slim and compact shape, the two anodized anticorodal aluminum grips make up a light, slender and at the same time very resistant handle. It can be housed in a breast pocket, in small flashlight holsters or inside a single loop of the M.O.L.L.E. system.

Equipped with a flipper assisted opening system, the blade rotates on ball bearings which allow a smooth and uncertain movement of the blade. This mechanism allows the user to open the blade quickly and easily, even with just one hand. The locking system adopted is the well-tested liner lock. The reversible clip is positioned on the back.

Ferrum T is available in 2 versions: the first, FERRUM T Black Warfare, equipped with a black handle and Geotech Camo blade, the innovative and original Extrema Ratio camouflage pattern, created by laser engraving. The second, FERRUM T TACTICAL MUD, with anodized handle in the new gray-green color and blade with MIL-C-13924 bluing.

The reversible clip is positioned on the back.

Intended use: Tactical / EDC

Type of production: Industrial
Country of production: Italy
Blade: N690Co 58HRC stainless steel
Blade Finish: Black
Handle: Rough Anticorodal
Blade length: 73mm.
Blade thickness: 3mm.
Closed length: 90mm.
Total length: 184mm.
Weight: 86g.
Closure: Liner Lock
Clip: Removable and reversible, in stainless steel
Packaging: Cardboard box with Extrema Ratio logos
Note: -

Ferrum Rescue is a tool designed for rescue operations, developed in collaboration with my friend Andrea Micheli, military and law enforcement expert, journalist and shooting instructor. Made with a very compact handle, this rescue tool is equipped with 3 blades, each of which has a specific function:

The first and main blade has a thickness of 3 millimeters and is designed to be used for more demanding purposes and to protect the cutting edge of the other two from premature wear. The teeth allow it to cut larger ropes or textile materials, the remaining smooth part has the classic function of a knife. The second blade is a scalpel, which can be used for extremely precise cuts and for emergency first aid interventions. The third blade, on the back of the first, is the smallest of the 3, it has the function of cutting lines, capable of cutting paracord and aramid material.

The interaction of the main blade with the scalpel allows the operator to make a quick emergency cut to free any injured person from his or her clothing.

The line cutter blade and the scalpel are both interchangeable.

Ferrum Rescue has a slim and compact shape, the two anodized anticorodal aluminum grips make up a light, slender and at the same time very resistant handle. It can be housed in a breast pocket, in small flashlight holsters or inside a single loop of the M.O.L.L.E. system. On the back there is also a hard metal glass breaker.

Equipped with a flipper assisted opening system, the blade rotates on ball bearings which allow a smooth and uncertain movement of the blade. This mechanism allows the operator to open the blade quickly and easily, even with just one hand. The locking system adopted is the well-tested liner lock. The reversible clip is positioned on the back.

The reversible clip is positioned on the back.

Intended use: Tactical / EDC

Type of production: Industrial
Country of production: Italy
Blade: N690Co 58HRC stainless steel
Blade finish: Satin
Handle: Rough Anticorodal
Blade length: 56mm.
Blade thickness: 3mm.
Closed length: 90mm.
Total length: 170mm. (18mm. INCLUDING SCALPEL BLADE)
Weight: 85g.
Closure: Liner Lock
Clip: Removable and reversible, in stainless steel
Packaging: Cardboard box with Extrema Ratio logos
Note: -

Ferrum E is a simple, essential and functional EDC (Every Day Carry) folding knife. Equipped with a drop blade, it has a slim and compact shape, the two anodised anticorodal aluminium sheaths make up a light, slender and at the same time very durable handle. It can be housed in a breast pocket, in small torch holsters or inside a single M.O.L.E. loop.

Equipped with a flipper-assisted opening system, the blade rotates on ball bearings that allow for smooth and uncertainty-free blade movement. This mechanism allows the operator to open the blade quickly and easily, even with one hand. The locking system adopted is the tried and tested liner lock.

The reversible clip is positioned at the rear.

Intended use: Tactical / EDC

Production type: Industrial
Country of Production: Italy
Blade: Stainless steel N690Co 58HRC
Blade finish: Satin
Handle: Rough Anticorodal
Blade length: 75mm.
Blade thickness: 3mm.
Length closed: 90mm.
Total length: 186mm.
Weight: 87g.
Closure: Liner Lock
Clip: Removable and reversible, stainless steel
Packaging: Cardboard box with Extrema Ratio logos
Notes: -

Ferrum E is a simple, essential and functional EDC (Every Day Carry) folding knife. Equipped with a drop blade, it has a slim and compact shape, the two anodised anticorodal aluminium sheaths make up a light, slender and at the same time very durable handle. It can be housed in a breast pocket, in small torch holsters or inside a single M.O.L.E. loop.

Equipped with a flipper-assisted opening system, the blade rotates on ball bearings that allow for smooth and uncertainty-free blade movement. This mechanism allows the operator to open the blade quickly and easily, even with one hand. The locking system adopted is the tried and tested liner lock.

The reversible clip is positioned at the rear.

Intended use: Tactical / EDC

Production type: Industrial
Country of Production: Italy
Blade: Stainless steel N690Co 58HRC
Blade finish: Satin
Handle: Rough Anticorodal
Blade length: 75mm.
Blade thickness: 3mm.
Length closed: 90mm.
Total length: 186mm.
Weight: 87g.
Closure: Liner Lock
Clip: Removable and reversible, stainless steel
Packaging: Cardboard box with Extrema Ratio logos
Notes: -

Intended Use: Tactical / EDC

Production type: Industrial
Country of Production: Italy
Blade: stainless steel N690Co 58HRC
Blade Finish: Burnishing MIL-C-13924
Handle: Rough Anticorodal
Blade Length: 70mm.
Blade thickness: 3mm.
Length closed: 99mm.
Total length: 168mm.
Weight: 85g.
Closure: Liner Lock
Clip: Removable and reversible, stainless steel
Packaging: Cardboard box with Extrema Ratio logos
Notes: -

Intended use: Sport

Type of production: Industrial
Country of production: Italy
Blade: N690Co stainless steel
Blade finish: black Idroglider stone washed
Handle: black G10
Blade length: 64mm.
Blade thickness: 4mm.
Closed length: 90mm.
Total length: 157mm.
Closed thickness: 12mm
Weight: 90g.
Closure: Liner Lock
Clip: removable and reversible, in stainless steel
Packaging: Cardboard box with Fox Knives logos, zip pouch
Note: -

Intended use: Sport

Type of production: Industrial
Country of production: Italy
Blade: Elmax 59/60HRC stainless steel
Blade finish: stone washed
Handle: Aluminum
Blade length: 75mm.
Blade thickness: 4mm.
Closed length: 103m.
Total length: 188mm.
Closed thickness: 18mm
Weight: 154g.
Closure: Liner Lock
Clip: removable and reversible, in stainless steel
Packaging: Cardboard box with Fox Knives logos, zipped case
Notes: Flipper type opening on ball bearings - Design by Jesper Voxnaes

Intended use: Sport

Type of production: Industrial
Country of production: Italy
Blade: Elmax 59/60HRC stainless steel
Blade Finish: Top Shield® black
Handle: Brown aluminum
Blade length: 75mm.
Blade thickness: 4mm.
Closed length: 103m.
Total length: 188mm.
Closed thickness: 18mm
Weight: 153g.
Closure: Liner Lock
Clip: removable and reversible, in stainless steel
Packaging: Cardboard box with Fox Knives logos, zipped case
Notes: Flipper type opening on ball bearings - Design by Jesper Voxnaes

The Fox Pikal is a folding tactical knife specifically designed for martial arts practitioners. It was created with the collaboration of the personal defense instructor Giuliano Ron who, after two years of severe tests, combined the advantages of the Pikal style (handle with blade pointing down and edge facing the person) with the Karambit (rear ring for the index)

Intended use: Tactical / Military

Type of production: Industrial
Country of production: Italy
Blade: N690Co stainless steel
Blade finish: Black Idroglider
Handle: G10
Blade length: 60mm.
Blade thickness: 3mm.
Total length: 182mm.
Weight: 113g.
Clip: reversible and removable, in painted stainless steel
Packaging: Cardboard box with Fox logos
Notes: Design by Giuliano Ron

Intended use: Tactical / Collection

Production type: Industrial
Country of production: Italy
Blade: N690Co stainless steel
Blade finish: Black Idroglider
Handle: G10
Blade length: 50mm of cutting edge and 70mm of blade
Blade thickness: 3mm
Overall length: 150mm
Weight: 105g
Clip: Steel
Packaging: Cardboard box with Fox logos
Notes: Design by Doug Marcaida

The Core Tanto series is designed with knives in mind that can be relied on in any environment, thanks to a solid, sturdy blade equipped with a strong point to penetrate and a sharp main bevel.
The Core Tanto is the perfect tool for days outdoors.

Intended Use: Sporting/Tactical

Production Type: Industrial
Country of manufacture: Italy
Blade: N690 59/60HRC stainless steel
Blade finish: Top Shield® black
Handle: FRN
Blade length: 97mm.
Blade thickness: 4mm.
Length closed: 103m.
Total length: 190mm.
Thickness when closed: 18mm.
Weight: 135g.
Closure: Liner Lock
Clip: removable and reversible, stainless steel
Packaging: Cardboard box with Fox Knives logos
Notes: Flipper-type opening on ball bearings - Design by Jesper Voxnaes

The Core Tanto series is designed with knives in mind that can be relied on in any environment, thanks to a solid, sturdy blade equipped with a strong point to penetrate and a sharp main bevel.
The Core Tanto is the perfect tool for days outdoors.

Intended Use: Sporting/Tactical

Production Type: Industrial
Country of manufacture: Italy
Blade: N690 59/60HRC stainless steel
Blade finish: Top Shield® black
Handle: FRN
Blade length: 97mm.
Blade thickness: 4mm.
Length closed: 103m.
Total length: 190mm.
Thickness when closed: 18mm.
Weight: 135g.
Closure: Liner Lock
Clip: removable and reversible, stainless steel
Packaging: Cardboard box with Fox Knives logos
Notes: Flipper-type opening on ball bearings - Design by Jesper Voxnaes

The Core Tanto series is designed with knives in mind that can be relied on in any environment, thanks to a solid, sturdy blade equipped with a strong point to penetrate and a sharp main bevel.
The Core Tanto is the perfect tool for days outdoors.

Intended Use: Sporting/Tactical

Production Type: Industrial
Country of manufacture: Italy
Blade: N690 59/60HRC stainless steel
Blade finish: Top Shield® black
Handle: FRN
Blade length: 97mm.
Blade thickness: 4mm.
Length closed: 103m.
Total length: 190mm.
Thickness when closed: 18mm.
Weight: 135g.
Closure: Liner Lock
Clip: removable and reversible, stainless steel
Packaging: Cardboard box with Fox Knives logos
Notes: Flipper-type opening on ball bearings - Design by Jesper Voxnaes

Translated with www.DeepL.com/Translator (free version)

Intended Use: Sporting / Tactical

Production type: Industrial
Country of Production: Italy
Blade: Stainless steel N690 59/60HRC
Blade finish: Acid Stonewashed
Handle: FRN
Blade Length: 97mm.
Blade thickness: 4mm.
Length closed: 103m.
Total length: 190mm.
Thickness when closed: 18mm.
Weight: 135g.
Closure: Liner Lock
Clip: removable and reversible, stainless steel
Packaging: Cardboard box with Fox Knives logos 
Notes: Flipper-type opening on ball bearings - Design by Jesper Voxnaes - Acid etching on the blade restores an already "worn" aesthetic appearance and each individual knife may have different finishes/colors/shades than the product in the pictures.

Intended Use: Tactical/Emergency

Production type: Industrial
Country of Production: Italy
Blade: Stainless steel N690Co 58HRC
Blade Finish: Desert Warfare
Handle: Anodized Anticorodal Aluminum
Blade Length: 95mm.
Blade thickness: 4mm.
Length closed: 134mm.
Total length: 225mm.
Thickness when closed: 24mm.
Weight: 162g.
Closure: Liner Lock
Clip: Stainless Steel
Packaging: cardboard box with Extrema Ratio logos
Notes: belt cutter, glass breaker, optics screwdriver

Intended Use: Tactical / Military 

Type of production: Industrial
Country of Production: Italy
Blade: Stainless steel N690Co
Blade finish: Stone Washed Black Idroglider
Handle: G10
Blade length: 70mm.
Blade thickness: 4mm.
Total length: 190mm.
Weight: 120g.
Locking system: Liner Lock, with additional safety.
Clip: removable and reversible, painted stainless steel
Packaging: Cardboard box with Fox-Wihongi logos
Notes: Design by Jared Wihongi (Special Forces CQC Instructor and SWAT Operator)

Intended use: sports/collection

Production type: Industrial
Country of Production: Italy
Blade: stainless steel M390 60/62HRC
Blade finish: Black PVD
Handle: Carbon Fiber
Blade length: 70mm.
Blade thickness: 3mm.
Length closed: 102m.
Total length: 180mm.
Sleeve thickness: 12mm
Weight: 78g.
Lock mechanism: liner lock
Clip: removable and reversible, bronze oxidized titanium
Packaging: Cardboard box with Fox Knives logos and faux leather zippered case
Notes: Design by Riccardo Gobbato

Intended use: sporting/collection

Production type: Industrial
Country of Production: Italy
Blade: Becut 56/58HRC stainless steel
Blade finish: Black Top Shield
Handle: Anodized aluminum
Blade Length: 70mm.
Blade thickness: 3mm.
Length closed: 102m.
Total length: 180mm.
Sleeve thickness: 12mm
Weight: 78g.
Lock mechanism: liner lock
Clip: removable and reversible, stainless steel
Packaging: Cardboard box with Fox Knives logos
Notes: Design by Riccardo Gobbato

Intended use: sporting/collection

Production type: Industrial
Country of Production: Italy
Blade: Becut 56/58HRC stainless steel
Blade finish: Black Top Shield
Handle: Anodized aluminum
Blade Length: 70mm.
Blade thickness: 3mm.
Length closed: 102m.
Total length: 180mm.
Sleeve thickness: 12mm
Weight: 78g.
Lock mechanism: liner lock
Clip: removable and reversible, stainless steel
Packaging: Cardboard box with Fox Knives logos
Notes: Design by Riccardo Gobbato

Destinazione d'uso: sportivo/collezione

Tipo di produzione: Industriale
Paese di produzione: Italia
Lama: in acciaio inox Becut 56/58HRC
Finitura lama: Black Top Shield
Manicatura:  Alluminio Anodizzato
Lunghezza lama: 70mm.
Spessore lama: 3mm.
Lunghezza chiuso: 102m.
Lunghezza totale: 180mm.
Spessore manicatura: 12mm
Peso: 78g.
Meccanismo di chiusura: Liner Lock
Clip: amovibile e reversibile, in acciaio inox
Confezione: Scatola di cartone con loghi Fox Knives
Note: Design by Riccardo Gobbato

Intended use: sports/collection

Type of production: Industrial
Country of production: Italy
Blade: M398 61/62 HRC stainless steel
Blade finish: PVD stone washed
Handle: titanium
Blade length: 80mm.
Blade thickness: 4mm.
Length closed: 113m.
Total length: 193mm.
Handle thickness: 16mm
Weight: 145g.
Locking mechanism: Liner Lock
Clip: removable and reversible, in stainless steel
Packaging: Cardboard box with Fox Knives logos - Zip case
Notes: Design by Jesper Voxnaes

Intended use: sports/collection

Type of production: Industrial
Country of production: Italy
Blade: N690Co 58HRC stainless steel
Blade finish: stone washed
Handle: Blue anodized aluminum
Blade length: 80mm.
Blade thickness: 4mm.
Length closed: 113m.
Total length: 193mm.
Handle thickness: 16mm
Weight: 116g.
Locking mechanism: Liner Lock
Clip: removable and reversible, in stainless steel
Packaging: Cardboard box with Fox Knives logos - Zip case
Notes: Design by Jesper Voxnaes

Intended use: sports/collection

Type of production: Industrial
Country of production: Italy
Blade: N690Co 58HRC stainless steel
Blade finish: Black PTFE
Handle: OD green anodized aluminum
Blade length: 80mm.
Blade thickness: 4mm.
Length closed: 113m.
Total length: 193mm.
Handle thickness: 16mm
Weight: 117g.
Locking mechanism: Liner Lock
Clip: removable and reversible, in stainless steel
Packaging: Cardboard box with Fox Knives logos - Zip case
Notes: Design by Jesper Voxnaes

Intended use: sporting/collection

Production type: Industrial
Country of manufacture: Italy
Blade: stainless steel N690Co 58HRC
Blade finish: Stone Washed
Handle: G10
Blade length: 80mm.
Blade thickness: 4mm.
Length closed: 113m.
Total length: 193mm.
Sleeve thickness: 16mm
Weight: 110g.
Lock mechanism: liner lock
Clip: removable and reversible, stainless steel
Packaging: Cardboard box with Fox Knives logos - Zip pouch
Notes: Design by Jesper Voxnaes

Intended use: sports/collection

Production type: Industrial
Country of Production: Italy
Blade: Stainless steel M398 61HRC
Blade finish: Satin
Handle: HDL carbon fiber
Blade length: 80mm.
Blade thickness: 4mm.
Length closed: 113m.
Total length: 193mm.
Sleeve thickness: 16mm
Weight: 106g.
Lock mechanism: liner lock
Clip: removable and reversible, stainless steel
Packaging: Cardboard box with Fox Knives logos - Zip pouch
Notes: Design by Jesper Voxnaes

Intended use: sports / collection

Type of production: Industrial
Country of production: Italy
Blade: Elmax 59 / 60HRC stainless steel
Blade finish: PVD
Handle: HDL carbon fiber
Blade length: 75mm.
Blade thickness: 4mm.
Closed length: 103m.
Total length: 188mm.
Sleeve thickness: 18mm
Weight: 135g.
Closing mechanism: Liner Lock
Clip: removable and reversible, in stainless steel
Packaging: Cardboard box with Fox Knives logos
Notes: Flipper type opening on ball bearings - Design by Jesper Voxnaes

Intended use: Mushroom knife

Blade: 12C27 stainless steel
Handle: Eucalyptus wood
Blade length: 65mm.
Blade thickness: 3mm.
Closed length: 110mm.
Total length: 175mm.
Balancing: -
Weight: 98g.
Closure: Liner Lock
Clip: in stainless steel
Sheath: -
Notes: Resealable Nylon Brush - Design by Riccardo Gobbato

Intended Use: Sporting

Production type: Industrial
Blade production: Italy
Blade: Becut stainless steel
Surface Treatment: Beadblasted
Handle: Green Micarta
Blade length: 8.9mm.
Blade thickness: 3mm.
Length closed: 112mm.
Total length: 200mm.
Thickness when closed: 14.5mm
Weight: 105g.
Closure: Liner Lock
Clip: Steel wireclip
Packaging: Cardboard box with Fox Knives logos
Notes: Design by Bob Terzuola

NON-automatic version of the Caimano Nero model

The Black Caiman is a tactical knife that Extrema Ratio, official supplier of Comsubin, has developed and delivered to the G.O.I. (Gruppo Operativo Incursori) of the Italian Navy. Its name recalls and pays homage to the heroic Caimani Neri del Piave, a department of Arditi of the Regia Marina and other components on a voluntary basis, which during the First World War crossed the Piave River by swimming to carry out raids in enemy territory.

Spear Point" 4 mm blade with asymmetrical rounding and partial sharpening of the counterbore to increase the penetration coefficient. The toothing on the blade allows you to cut cables and fabrics with high resistance preserving the sharpness.

It is a medium folder with a robust structure. The thick aluminum cheeks, thanks to the many processes of removal make the knife light and balanced. The end of the handle, which recalls the shape of the Helix/Timon group of the slow running torpedo (S.L.C.), serves to improve the grip for the rapid extraction of the knife from the pocket.

The DLC-coated titanium clip can be positioned at three different angles on either side to allow for maximum customization of the carry. Its shape is designed to minimize the bulk of the handle outside the pocket.

Among its endowments, besides the carbide glass breaker, there is also a safety, that when inserted, preserves from a dangerous accidental closing of the blade.

Destination of use: Tactical/Military

Type of production: industrial
Blade: stainless steel N690Co 58HRC
Country of production: Italy
Handle: Anticorodal
Blade length: 93mm.
Blade thickness: 4mm.
Length closed: 140mm.
Total lenght: 231mm.
Weight: 180g.
Closure: Liner Lock
Clip: deep pocket, reversible and removable, in stainless steel
Notes: Additional safety stop, when knife is open

The BF2 is a "full size" lockable particularly suitable for professional use by military and police operators in the field. The handle is firm and comfortable; the clip, reversible and enveloping, becomes a useful and comfortable support for the thumb in "reverse grip". The grip is full with the characteristic lowered surfaces to engage the opening "pins" without protruding from the profile of the closed knife. The blade, available in a drop or a lot version, has a flat edge and, as in the BF1, a particularly thick and resistant tip. The blade locking mechanism is the tested LINER-LOCK, assisted by a safety mechanism to be operated manually protected by a casing.

Intended use: Tactical / Military

Type of production: industrial
Blade: N690Co 58HRC stainless steel
Country of production: Italy
Handle: Anticorodal
Blade length: 90mm.
Blade thickness: 3mm.
Closed length: 124mm.
Total length: 210mm.
Balancing: -
Weight: 142g.
Closure: Liner Lock
Clip: reversible and removable in stainless steel
Sheath: -
Notes: Safety stop with open knife

Il BF2 è un chiudibile “full size” particolarmente indicato per l’impiego professionale da parte di operatori militari e di polizia sul campo. L’impugnatura è salda e confortevole; la clip, reversibile ed avvolgente, diventa un utile e comodo appoggio per il pollice in “reverse grip”. La guancetta è piena con i caratteristici piani ribassati per impegnare i “pin” d’apertura senza che sporgano dal profilo del coltello chiuso. La lama, disponibile in versione drop o tanto, ha l’arrotatura piatta e, come nel BF1, la punta particolarmente spessa e resistente. Il meccanismo di blocco della lama è il collaudato LINER-LOCK, coadiuvato da un meccanismo di sicura da azionare manualmente protetto da un carter. 

Destinazione d'uso: Tattico/Militare

Tipo di produzione: industriale
Lama: in acciaio inox N690Co 58HRC
Paese di produzione: Italia
Impugnatura: Anticorodal
Lunghezza lama: 90mm.
Spessore lama: 3mm.
Lunghezza chiuso: 124mm.
Lunghezza totale: 210mm.
Bilanciatura: -
Peso: 142g.
Chiusura: Liner Lock
Clip: reversibile ed amovibile in acciaio inox
Fodero: -
Note: Fermo di sicurezza a coltello aperto

Intended use: sporting

Production type: Industrial
Country of production: Italy
Blade: Stainless steel N690 59/60HRC
Blade finishing: Black Cerakote
Handle: FRN (fiberglass reinforced nylon) with internal stainless steel folders
Blade length: 75mm.
Blade thickness: 4mm.
Length closed: 103m.
Total length: 188mm.
Sleeve thickness: 18mm
Weight: 135g.
Locking mechanism: Liner Lock
Clip: Removable and reversible, in stainless steel
Package: Cardboard box with Fox Knives logos 
Notes: Flipper type opening on ball bearings - Design by Jesper Voxnaes

Intended use: sporting

Production type: Industrial
Country of Production: Italy
Blade: Stainless steel N690 59/60HRC
Blade finish: stonewashed
Handle: FRN (fiberglass reinforced nylon) with internal stainless steel folders
Blade length: 75mm.
Blade thickness: 4mm.
Length closed: 103m.
Total length: 188mm.
Sleeve thickness: 18mm
Weight: 135g.
Locking mechanism: Liner Lock
Clip: Removable and reversible, in stainless steel
Package: Cardboard box with Fox Knives logos 
Notes: Flipper type opening on ball bearings - Design by Jesper Voxnaes

Intended Use: Sporting / Tactical

Production type: Industrial
Country of Production: Italy
Blade: Steel D2 59/61HRC
Blade finish: Black Idroglider
Handle: G10 with aluminum spacer
Blade length: 95mm.
Blade thickness: 4mm.
Length closed: 132mm.
Total length: 227mm.
Thickness when closed: 14mm.
Weight: 175g.
Closure: Liner Lock
Clip: removable, in stainless steel AISI 420J2B with Black Idroglider treatment
Sheath: leather, felt and nylon pouch, with zipper
Package: Cardboard box with Fox Knives logos 
Notes: Design by Gudy Van Poppel - Opening movement on ball bearings - Carson Flipper opening system

Intended Use: Sporting

Production type: Industrial
Country of Production: Italy
Blade: Stainless steel M390 59/61HRC
Blade finishing: Satin finish
Handle: G10 with AISI 303 stainless steel bolts and screws
Blade length: 60mm.
Blade thickness: 3mm.
Length closed: 90m.
Total length: 150mm.
Thickness when closed: 11mm
Weight: 95g.
Closure: Liner Lock
Clip: wire, in stainless steel AISI 302, removable and reversible
Sheath: pouch with zipper, in cordura
Package: Cardboard box with Fox Knives logos
Notes: Design by Antonio Di Gennaro - Opening movement on ball bearings - Carson Flipper opening system

Intended Use: Sporting / Collection

Production type: Industrial
Country of Production: Italy
Blade: Stainless steel M390 59/61HRC
Blade Finish: Acid Stone Washed
Handle: Acid Stone Washed Titanium with AISI 303 stainless steel screws
Blade length: 65mm.
Blade thickness: 3mm.
Length closed: 85m.
Total length: 144mm.
Thickness when closed: 14mm
Weight: 110g.
Closure: Liner Lock in AISI 420 stainless steel
Clip: wire, AISI 302 stainless steel, removable and reversible
Scabbard: leather
Package: Cardboard box with Fox Knives logos
Notes: Design by Jesper Voxnaes - Opening movement on ball bearings - Carson Flipper opening system

Intended Use: Sporting / Collection

Production type: Industrial
Country of Production: Italy
Blade: Stainless steel M390 59/61HRC
Blade Finish: Satin
Handle: Carbon Fiber with AISI 303 stainless steel screws
Blade length: 65mm.
Blade thickness: 3mm.
Length closed: 85m.
Total length: 144mm.
Thickness when closed: 14mm
Weight: 60g.
Closure: Liner Lock in AISI 420 stainless steel
Clip: wire, AISI 302 stainless steel, removable and reversible
Scabbard: leather
Package: Cardboard box with Fox Knives logos
Notes: Design by Jesper Voxnaes - Opening movement on ball bearings - Carson Flipper opening system

Intended use: Sports / Tactical

Type of production: Industrial
Country of production: Italy
Blade: N690 59 / 60HRC stainless steel
Blade finish: Dark Stonewashed
Handle: FRN
Blade length: 65mm.
Blade thickness: 3mm.
Length closed: 85m.
Total length: 144mm.
Thick when closed: 14mm
Weight: 79g.
Closure: Liner Lock
Clip: flush, stainless steel, removable and reversible
Packaging: Cardboard box with Fox Knives logos
Notes: Design by Jesper Voxnaes

Intended use: Sports / Tactical

Type of production: Industrial
Country of production: Italy
Blade: N690 59 / 60HRC stainless steel
Blade finish: Stonewashed
Handle: FRN
Blade length: 65mm.
Blade thickness: 3mm.
Length closed: 85m.
Total length: 144mm.
Thick when closed: 14mm
Weight: 79g.
Closure: Liner Lock
Clip: flush, stainless steel, removable and reversible
Packaging: Cardboard box with Fox Knives logos
Notes: Design by Jesper Voxnaes

Intended use: Sports / Tactical

Type of production: Industrial
Country of production: Italy
Blade: N690 59 / 60HRC stainless steel
Blade finish: Stonewashed
Handle: FRN
Blade length: 65mm.
Blade thickness: 3mm.
Length closed: 85m.
Total length: 144mm.
Thick when closed: 14mm
Weight: 79g.
Closure: Liner Lock
Clip: flush, stainless steel, removable and reversible
Packaging: Cardboard box with Fox Knives logos
Notes: Design by Jesper Voxnaes

Intended use: Sports / Tactical

Type of production: Industrial
Country of production: Italy
Blade: N690 59 / 60HRC stainless steel
Blade finish: Dark Stonewashed
Handle: FRN
Blade length: 65mm.
Blade thickness: 3mm.
Length closed: 85m.
Total length: 144mm.
Thick when closed: 14mm
Weight: 79g.
Closure: Liner Lock
Clip: flush, stainless steel, removable and reversible
Packaging: Cardboard box with Fox Knives logos
Notes: Design by Jesper Voxnaes

RESOLZA, a term of ancient origin, is today one of the most famous traditional knives of our country. The name suggests the razor by chance.

It was born in Sardinia centuries ago and has accompanied its inhabitants until today in the daily work of a peasant and pastoral life, following them even when its men were called to war. The chronicles of the Sassari Brigade during the First World War cite this knife among its soldiers' equipment.

We wanted to make a tribute by revisiting it according to our canons, without wanting to hurt any of the prestigious Sardinian artisans who still today pass on the tradition and wisdom of their ancestors. The dimensions and proportions are the original ones of a 10 cm blade, but the materials and technologies are those of our production. The handle revised in our style, the blade most faithful to tradition. In addition to the original, it has the blade lock open.

Intended use: sports

Type of production: industrial
Country of production: Italy
Blade: stainless steel N690Co 58HRC
Handle: Anticorodal
Blade length: 100mm.
Blade thickness: 3mm.
Total length: 220mm.
Weight: 65g.
Closure: Liner Lock
Clip: -
Sheath: -
Notes: blade with MIL-C 13924 burnishing

RESOLZA, a term of ancient origin, is today one of the most famous traditional knives of our country. The name suggests the razor by chance.

It was born in Sardinia centuries ago and has accompanied its inhabitants until today in the daily work of a peasant and pastoral life, following them even when its men were called to war. The chronicles of the Sassari Brigade during the First World War cite this knife among its soldiers' equipment.

We wanted to make a tribute by revisiting it according to our canons, without wanting to hurt any of the prestigious Sardinian artisans who still today pass on the tradition and wisdom of their ancestors. The dimensions and proportions are the original ones of a 10 cm blade, but the materials and technologies are those of our production. The handle revised in our style, the blade most faithful to tradition. In addition to the original, it has the blade lock open.

Intended use: sports

Type of production: industrial
Country of production: Italy
Blade: stainless steel N690Co 58HRC
Handle: Anticorodal
Blade length: 100mm.
Blade thickness: 3mm.
Total length: 220mm.
Weight: 65g.
Closure: Liner Lock
Clip: -
Sheath: -
Notes: blade with stonewashed treatment

Intended use: Sports / Tactical

Type of production: Industrial
Country of production: Italy
Blade: stainless steel 1.4116
Blade treatment: Sandblasted
Handle: Nylon
Blade length: 25mm.
Blade thickness: 2.5mm.
Length closed: 61mm.
Total length: 8mm.
Thick when closed: 11mm.
Weight: 30g.
Opening: manual, two-handed or extraction from the pocket using a wave-like system
Closure: Liner Lock
Clip: stainless steel, removable
Packaging: cardboard box with Fox logos and embroidered fabric key ring

Intended use: Sports / Tactical

Type of production: Industrial
Country of production: Italy
Blade: stainless steel 1.4116
Blade treatment: Sandblasted
Handle: Nylon
Blade length: 25mm.
Blade thickness: 2.5mm.
Length closed: 61mm.
Total length: 8mm.
Thick when closed: 11mm.
Weight: 30g.
Opening: manual, two-handed or extraction from the pocket using a wave-like system
Closure: Liner Lock
Clip: stainless steel, removable
Packaging: cardboard box with Fox logos and embroidered fabric key ring

Intended use: Sports / Tactical

Type of production: Industrial
Country of production: Italy
Blade: stainless steel 1.4116
Blade treatment: Sandblasted
Handle: Nylon
Blade length: 25mm.
Blade thickness: 2.5mm.
Length closed: 61mm.
Total length: 8mm.
Thick when closed: 11mm.
Weight: 30g.
Opening: manual, two-handed or extraction from the pocket using a wave-like system
Closure: Liner Lock
Clip: stainless steel, removable
Packaging: cardboard box with Fox logos and embroidered fabric key ring

Intended use: Tactical

Type of production: Industrial
Lama production: Italy
Blade: N690Co 58HRC stainless steel
Lama treatment: Satin
Handle: Anticorodal
Blade length: 95mm.
Blade thickness: 3mm.
Length closed: 128mm.
Total length: 224mm.
Thick when closed: 17mm.
Balancing: -
Weight: 104g.
Closure: Liner Lock
Clip: removable in stainless steel
Sheath: -
Packaging: cardboard box with Extrema Ratio logos
Note: -

It is a small basic folder, produced with a technopolymer handle that enhances its resistance and lightness, thanks also to the steel frame. The blade locking mechanism is the tried and tested LINER-LOCK. The model maintains all the features of the previous BF0 model, updated with the new High Speed Razor Opening opening system and with a Sear Point blade.

Type of production: industrial
Blade: stainless steel N690Co 58HRC
Country of production: Italy
Handle: Nylon with stainless steel folders
Blade length: 60mm.
Blade thickness: 2.5mm.
Length closed: 95mm.
Total length: 145mm.
Weight: 52g.
Closure: Liner Lock
Clip: reversible and removable, in stainless steel

It is a small basic folder, produced with a technopolymer handle that enhances its resistance and lightness, thanks also to the steel frame. The blade locking mechanism is the tried and tested LINER-LOCK. The model maintains all the features of the previous BF0 model, updated with the new High Speed Razor Opening opening system and with a Sear Point blade.

Type of production: industrial
Blade: stainless steel N690Co 58HRC
Country of production: Italy
Handle: Nylon with stainless steel folders
Blade length: 60mm.
Blade thickness: 2.5mm.
Length closed: 95mm.
Total length: 145mm.
Weight: 52g.
Closure: Liner Lock
Clip: reversible and removable, in stainless steel

It is a small basic folder, produced with a technopolymer handle that enhances its resistance and lightness, thanks also to the steel frame. The blade locking mechanism is the tried and tested LINER-LOCK. The model maintains all the features of the previous BF0 model, updated with the new High Speed Razor Opening opening system and with a Sear Point blade.

Type of production: industrial
Blade: stainless steel N690Co 58HRC
Country of production: Italy
Handle: Nylon with stainless steel folders
Blade length: 60mm.
Blade thickness: 2.5mm.
Length closed: 95mm.
Total length: 145mm.
Weight: 52g.
Closure: Liner Lock
Clip: reversible and removable, in stainless steel

It is a small basic folder, produced with a technopolymer handle that enhances its resistance and lightness, thanks also to the steel frame. The blade locking mechanism is the tried and tested LINER-LOCK. The model maintains all the features of the previous BF0 model, updated with the new High Speed Razor Opening opening system and with a Sear Point blade.

Type of production: industrial
Blade: stainless steel N690Co 58HRC
Country of production: Italy
Handle: Nylon with stainless steel folders
Blade length: 60mm.
Blade thickness: 2.5mm.
Length closed: 95mm.
Total length: 145mm.
Weight: 52g.
Closure: Liner Lock
Clip: reversible and removable, in stainless steel

Destination of use: sports

Type of production: Industrial
Country of production: Italy
Blade: N690 59 / 60HRC stainless steel
Blade treatment: black idroglider
Handle: Carbon Fiber with stainless steel liners
Blade length: 90mm.
Blade thickness: 4mm.
Length closed: 123mm.
Total length: 210mm.
Thick when closed: 18mm
Weight: 160g.
Closure: LinerLock
Clip: stainless steel, removable and reversible
Sheath: nylon case with zip
Packaging: cardboard box with Fox Knives logos
Notes: Design by Kmrj Kmaxrom

Destination of use: sports

Type of production: Industrial
Country of production: Italy
Blade: N690 59 / 60HRC stainless steel
Blade treatment: black idroglider
Handle: G10 with stainless steel folders
Blade length: 90mm.
Blade thickness: 4mm.
Length closed: 123mm.
Total length: 210mm.
Thick when closed: 18mm
Weight: 160g.
Closure: LinerLock
Clip: stainless steel, removable and reversible
Sheath: nylon case with zip
Packaging: cardboard box with Fox Knives logos
Notes: Design by Kmrj Kmaxrom

Destination of use: sports

Type of production: Industrial
Country of production: Italy
Blade: N690 59 / 60HRC stainless steel
Blade treatment: stonewashed
Handle: G10 with stainless steel folders
Blade length: 90mm.
Blade thickness: 4mm.
Length closed: 123mm.
Total length: 210mm.
Thick when closed: 18mm
Weight: 160g.
Closure: LinerLock
Clip: stainless steel, removable and reversible
Sheath: nylon case with zip
Packaging: cardboard box with Fox Knives logos
Notes: Design by Kmrj Kmaxrom

Intended use: Tactical

Type of production: Industrial
Lama production: Italy
Blade: Stainless steel N690Co 58HRC
Lama treatment: Testudo
Handle: Anticorodal
Blade length: 122mm.
Blade thickness: 3mm.
Length closed: 150mm.
Total length: 277mm.
Thick when closed: 17mm.
Balancing: -
Weight: 137g.
Closure: Liner Lock
Clip: removable in stainless steel
Sheath: -
Packaging: cardboard box with Extrema Ratio logos
Note: -

Intended use: Tactical

Type of production: Industrial
Lama production: Italy
Blade: Stainless steel N690Co 58HRC
Lama treatment: Satin
Handle: Anticorodal
Blade length: 122mm.
Blade thickness: 3mm.
Length closed: 150mm.
Total length: 277mm.
Thick when closed: 17mm.
Balancing: -
Weight: 137g.
Closure: Liner Lock
Clip: removable in stainless steel
Sheath: -
Packaging: cardboard box with Extrema Ratio logos
Note: -

Intended use: Sports / Tactical

Type of production: Industrial
Country of production: Italy
Blade: stainless steel 1.4116
Blade treatment: Sandblasted
Handle: Nylon
Blade length: 25mm.
Blade thickness: 2.5mm.
Length closed: 61mm.
Total length: 8mm.
Thick when closed: 11mm.
Weight: 30g.
Opening: manual, two-handed or extraction from the pocket using a wave-like system
Closure: Liner Lock
Clip: stainless steel, removable
Packaging: Cardboard box with Fox logos and synthetic keychain with Fox and Mini-Ka logos

Intended use: Sports / Tactical

Type of production: Industrial
Country of production: Italy
Blade: stainless steel 1.4116
Blade treatment: Sandblasted
Handle: Nylon
Blade length: 25mm.
Blade thickness: 2.5mm.
Length closed: 61mm.
Total length: 8mm.
Thick when closed: 11mm.
Weight: 30g.
Opening: manual, two-handed or extraction from the pocket using a wave-like system
Closure: Liner Lock
Clip: stainless steel, removable
Packaging: Cardboard box with Fox logos and synthetic keychain with Fox and Mini-Ka logos

Intended use: Sports / Tactical

Type of production: Industrial
Country of production: Italy
Blade: stainless steel 1.4116
Blade treatment: Sandblasted
Handle: Nylon
Blade length: 25mm.
Blade thickness: 2.5mm.
Length closed: 61mm.
Total length: 8mm.
Thick when closed: 11mm.
Weight: 30g.
Opening: manual, two-handed or extraction from the pocket using a wave-like system
Closure: Liner Lock
Clip: stainless steel, removable
Packaging: Cardboard box with Fox logos and synthetic keychain with Fox and Mini-Ka logos

Intended use: Sports / Tactical

Type of production: Industrial
Country of production: Italy
Blade: stainless steel 1.4116
Blade treatment: Black Idroglider
Handle: Nylon
Blade length: 25mm.
Blade thickness: 2.5mm.
Length closed: 61mm.
Total length: 8mm.
Thick when closed: 11mm.
Weight: 30g.
Opening: manual, two-handed or extraction from the pocket using a wave-like system
Closure: Liner Lock
Clip: stainless steel, removable
Packaging: Cardboard box with Fox logos and synthetic keychain with Fox and Mini-Ka logos

Intended use: Sports / Tactical

Type of production: Industrial
Country of production: Italy
Blade: stainless steel 1.4116
Blade treatment: Black Idroglider
Handle: Nylon
Blade length: 25mm.
Blade thickness: 2.5mm.
Length closed: 61mm.
Total length: 8mm.
Thick when closed: 11mm.
Weight: 30g.
Opening: manual, two-handed or extraction from the pocket using a wave-like system
Closure: Liner Lock
Clip: stainless steel, removable
Packaging: Cardboard box with Fox logos and synthetic keychain with Fox and Mini-Ka logos