Knives, collection knife, tactical knives, outdoor knives, pocket knives and tools

Intended use: collection / sports

Type of production: Artisan
Production Lama: Cambodia
Blade: DNH7 carbon steel
Blade treatment: -
Handle: Water Buffalo Horn
Blade length: about 76mm.
Blade thickness: about 3mm.
Closed length: about 103mm.
Total length: about 180mm.
Thick when closed: about 15mm.
Balancing: -
Weight: about 120g.
Closure: without blade lock
Clip: -
Sheath: cordura bag
Packaging: -
Note: -

This small titanium folder is the result of a desire by Spartan Blade to produce a high quality slip joint folder using as few small moving parts as possible. While attending the 2012 IWA Show in Germany, we spoke with several people who simply couldn’t own one of our larger folders due to the restrictions of knives with locks, one handed opening, and long blades. During the show, Mark and Curtis were visiting the Nuremburg Toy Museum and were impressed by some of the very small high-tech mechanisms used to make toys. It was then the idea hit them to make a slip joint that didn’t require several small fine blanked parts, allowing for a more modern look and function than the classic slipjoint. Now they had a great idea but not the full mechanism to make it work.

Later, Spartan met with Les Halpern of Halpern Titanium and explained their idea for a small modern slip joint. He became very excited as he had an idea for a similar knife using what he called “A good idea” for a mechanism. Les did some drawings explaining his idea for eliminating the traditional back spring. Normally, slip joint blades are held in position by a strong "back spring" which assists them with bias to the open or closed position. Les’ idea was to make the frame the spring with the same bias in open or closed position.

This folder eliminates the need for a back spring by using what we call an “Integral Frame Slipjoint”, the dorsal side of the frame is cut to work as a spring and holds a pin that creates a bias to close and open. The blade is opened by pushing on the tab on the blade (it is not a flipper tab!) with one hand and pulling with the thumb and forefinger on the triangle cut-out of the opposite side and hand. Additionally, the pin "locks" into the blade when held firmly by the users thumb and forefinger in in position of use but is free to rotate upon release of the frame handle.

Intended use: Sport / Collection
Production Type: Semi-Industrial
Production Lama USA
Blade: stainless steel CPM-S35VN
Treatment Lama: stonewash
Handle: titanio
Blade length: 48mm.
Blade thickness: 2 mm.
Closed Length: 74mm
Overall length: 121mm.
Thick when closed: 7mm
Balancing: -
Weight: 36g.
Closing: Integral Frame Slipjoint (opening and closing two-handed block blade)
Clip: Titanium
Sheath: -
Packaging: Cardboard box with logos Spartan Blades
Notes: WINNER - BLADE 2014 Most Innovative American Made Knife of the Year

WARNING: technical data of the knife are approximate and vary from knife to knife these are handmade products.

Intended Use: collection / sports

Production Type: Handmade
Production Blade: Cambodia
Blade: carbon steel DNH7
Treatment Lama: -
Handle material: wood
Blade length: about 65mm.
Blade thickness: about 2mm.
Closed Length: about 154mm.
Total length: about 185mm.
Thick when closed: about 13mm.
Balance: -
Weight: about 68g.
Closing: -
Clip: -
Sheath: -
Packaging: bag Cordura
Notes: -

WARNING: technical data of the knife are approximate and vary from knife to knife these are handmade products.

Intended Use: collection / sports

Production Type: Handmade
Production Blade: Cambodia
Blade: carbon steel DNH7
Treatment Lama: -
Handle material: wood
Blade length: about 65mm.
Blade thickness: about 2mm.
Closed Length: about 154mm.
Total length: about 185mm.
Thick when closed: about 13mm.
Balance: -
Weight: about 68g.
Closing: -
Clip: -
Sheath: -
Packaging: bag Cordura
Notes: -