Knives, collection knife, tactical knives, outdoor knives, pocket knives and tools
-
Museum Replicas Windlass - Bonny Highland Scottish Dirk 400806 - craft dagger
The Scottish dirk (also called highland dirk, in Scottish Gaelic, biodag) is a traditional and ceremonial side dagger of Scottish Highland regiment officials and possibly derived from the sixteenth century ballock.
The traditional Scottish dirk spread particularly in the second half of the seventeenth century, when it was used among the military during the Jacobite insurrection.
Production: artisan
Blade: carbon steel
Handle: wood
Knob: steel
Guard: steel
Sheath: leather and steel
Blade length: 29cm.
Total Length: 42.5cm.
Blade width: 35mm.
Blade thickness: 4mm.
Weight: 328g.
Balancing: -400806 -
Museum Replicas Windlass - Sgian Dubh 400910 Scottish knife - knife collection
The Sgian Dubh is a ceremonial dagger knife (in sgian Gaelic) worn as part of the modern Scottish Highland dress, along with the kilt.
It is worn tucked into socks, with only the knob visible.Intended use: sports / collection
Type of production: artisanal
Country of production: India
Blade: 1055 carbon steel
Blade treatment: -
Handle: in engraved wood with fittings
Blade length: 82mm.
Blade thickness: 2.5mm.
Total length: 170mm.
Weight: 46g.
Sheath: in wood and leather
Packaging: -
Note: -400910 -
Museum Replicass Windlass - Primitive Bowie Knife - 400884 - knife
Intended use: sports / collection / hunting
Type of production: Semi-Industrial
Lama production: India
Blade: 1065 carbon steel
Handle: brown wood
Blade length: 300mm.
Blade thickness: 4.5mm.
Total length: 465mm.
Balancing: 5 cm advanced
Weight: 542g.
Sheath: in brown leather
Packaging: cardboard box400884 -
Mercury - Logan Orange by Moreno Franzin - knife
Logan is not a common liner, but hides an epic revolution in the constructive concept!
Unlike traditional liners, Logan has no moving pins, but is born from a 5th titanium monolith. The accurate CNC milling machines produce Logan's body: solid, lightweight, slim and highly functional where the blade rotates on the pin, one With the base, to ensure a high strength and sturdiness. The retractable screws in the body give Logan the ultimate touch of clean elegance.
Purpose: Sportsman / EDC
Type of production: Industrial
Country of production: Maniago - Italy
Blade: D2 Steel at 61HRC hardened vacuum
Blade treatment: beaded blast
Handle: Titanium monolithic 6AL4V and G10
Blade Length: 95mm.
Blade thickness: 3mm.
Closed length: 113mm.
Total length: 205mm.
Closed thickness: 9mm.
Weight: 96g.
Opening: In one hand, with removable T-pin, on the back of the blade
Washers: Teflon
Closure: Liner Lock
Clip: Stainless steel, removable and reversible
Sheath: Upholstered zip pocket
Packing: Cardboard box with Mercury logos
Notes: Design by Moreno FranzinME-LOGOR€188.52Out of stock -
Azero - Machete Micarta - 204221 - knife
Use: Heavy Utility / Hiking
Type of production: industry
Blade: full tang, stainless steel ACX-380 (Krupp 1.4116) to 58HRC
Treatment Blade: satin
Production Lama: spain
Handle: Canvas Micarta
Blade length: 160mm.
Blade Thickness: 5mm.
Overall length: 280mm.
Balance: the branch guard
Weight: 360g.
Sheath: Brown leather
Packaging: cardboard box with logos Azero SpainAZ204221 -
Azero - Hunting Teak - 210091 - knife
Intended Use: Hiking / Hunting
Type of production: industry
Blade: full tang, stainless steel ACX-380 (Krupp 1.4116) to 58HRC
Treatment Blade: satin
Production Lama: spain
Handle material: teak wood
Blade length: 90mm.
Blade Thickness: 5mm.
Overall length: 203mm.
Balancing: backward to 2.5cm from the branch guard
Weight: 180g ..
Sheath: Brown leather with built-in sharpener
Packaging: cardboard box with logos Azero SpainAZ210091 -
Azero - D2 Cocobolo - 214022 - knife
Intended Use: hiking / hunting
Type of production: industry
Blade: full tang, steel D2 58 / 60HRC
Treatment Blade: satin
Production Lama: spain
Handle: cocobolo wood
Blade length: 100mm.
Blade Thickness: 5mm.
Overall length: 225mm.
Balancing: backward to 2.5cm from the branch guard
Weight: 260g.
Sheath: Brown leather
Packaging: cardboard box with logos Azero SpainAZ214022 -
Gatco - Edgemate Diamond Knife Sharpening System - 10004 - accessories knives
Gatco Sharpening Kit professional American company that enables even the less experienced of affiare perfectly smooth or serrated blades in a very short time without the possibility of error.
The kit includes a chuck T thanks to which you can safely block the blade to be sharpened and keep under control the angle of the wire using the various holes at different distances depending on the angle to maintain (patented Gatco). The three stones are of three diamond grits: fine (pink), medium (green) and large (orange). There is also a special ceramic stone triangular (medium blue) to sharpen serrated blades or partially serrated and a vial of 60ml of synthetic oil formulated for the task of sharpening. Everything is contained in a box of ABS with the following sizes: 24x16, 5x4 cm.
6404-10004 -
Gatco - Edgemate Professional Knife Sharpening System - accessori coltelli
Kit di affilatura professionale dell'americana Gatco che permette, anche ai meno esperti, di affiare perfettamente lame seghettate o lisce in brevissimo tempo senza possibilità di errore.
Il kit è composto da una morsa per coltelli che permette di tenere sempre sotto controllo l'angolazione del filo, uno specifico olio sintetico per affilatura, quattro pietre grana estra gross, grossa, media e fine ed una speciale pietra ceramica triangolare per affilare le lame seghettate o parzialmente seghettate.6404 -
Mercury - Combat Black - knife
Mercury - Combat Black - knife
Blade: Integral stainless steel Z50CD15
Total length: 22.5 cm.
Blade length: 12 cm.
Blade thickness: 4 mm.
Handle thickness: 12 mm
Handle Length: 9 cm.
Weight: 160 gr.
Sheath: Black leather2368€72.95Out of stock -
Mercury - Dragon - Knife
Mercury - Dragon - Knife
Integral stainless steel blade Z50CD15
Total length: 22.5 cm.
Blade length: 12 cm.
Blade thickness: 4 mm.Handle thickness: 12 mm
Handle Length: 9 mm
Sheath: Black leatherProduction: Italy
2369€61.48Out of stock -
Museum Replicas Windlass - Italian Bastard Sword 500890 - PRIVATE COLLECTION - Artisan Sword
sword withdrawn from a private collection - In excellent condition, only the blade has a scratch following the removal of an engraving (visible in the attached photos)
Checked and certified by our internal Coltelleria Collini laboratory.
KNIFE RETIRED FROM PRIVATE COLLECTION
* Type: Previously Purchased and Used
* Condition: Excellent condition
* Marks on blade: YES
* Marks on handle: NO
* Box: Present
* Scabbard: Scabbard
* Manuals, Certificates and Warranties: Yes
* Checked and Certified by our internal laboratoryThis splendid battle ready sword stands out for the black finishes of the blade, pommel and guard and is a perfect example of a bastard sword: compact blade and elongated handle so you can use a second hand as support while still being able to use the sword with one hand thanks to its weight and small dimensions.
Blade: carbon steel
Handle: leather
Knob: carbon steel
Guard: carbon steel
Sheath: leather and steel
Blade length: 86cm.
Total Length: 105cm.
Blade Width: 45mm.
Blade thickness: 5mm.
Weight: 1580g.
Balancing: -AP8687