Knives, collection knife, tactical knives, outdoor knives, pocket knives and tools
-
Helle Norway - Utvaer knife by Vox - PRIVATE COLLECTION - No.600 - knife
KNIFE RETIRED FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: In good condition
* Commercially available: YES
* Sharpening: re-sharpened by our in-house laboratory
* Marks on blade: YES, has a number of scratches on the blade
* Marks on handle: None
* Box: Present and complete
* Sheath: Leather sheath
* Manuals, Certificates and Warranties: Present
* Checked and Certified by our internal laboratoryIntended use: hunting/hiking
Type of production: semi-artisanal
Blade: 12C27 stainless steel
Handle: Birch
Blade length: 102mm.
Blade thickness: 3mm.
Total length: 221mm.
Balancing: set back 2.5cm
Weight: 151g.
Sheath: leather
Notes: Design by Jesper VoxnaesAP-HE-600 -
Horl - 2 PRO - diamond and ceramic disc sharpener - Made in Germany
With HORL ® 2 Pro, Otmar and Timo Horl are making a very personal dream come true. With a high precision internal planetary gear, it triples the grinding motion generated by a simple rolling motion. Therefore, HORL ® 2 Pro sharpens at triple speed. The solid components made of stainless steel and aluminum give it a particularly noble appearance.
TWO DISCS
DIAMOND ABRASIVE The industrial diamonds used are suitable for effectively sharpening all steel for knives of any degree of hardness without water. When used correctly, the HORL ® Diamond Standard never needs to be replaced. The 46 μm grain size sharpens efficiently and precisely. In a short time, a high-quality sharpening result is achieved. The discs of the HORL ® 2 CRUISE are not replaceable
CERAMIC SANDING WHEEL After processing with HORL ® Diamond Standard, the ceramic sanding disc noticeably improves the sanding result. Only a few movements are needed for this. The result is a smooth, clean and filigree sharp knife edge.
SUPERIOR EFFICIENCY
Industrial diamonds are considered to be one of the most durable and effective abrasives on the market. Monocrystalline diamonds are harder than any knife steel. Using a galvanic process, the diamonds in the HORL ® Diamond Standard are set at approx. 55% in a nickel bed. After the first grinding processes, the initially rough surface becomes finer and HORL® Diamond Standard achieves the ideal sanding surface.
HOR-2PRO -
Horl - 2 OAK - sharpener with diamond and ceramic disc - Made in Germany
HORL ® 2 is the latest technological benchmark in the HORL ® family of sharpeners. Two sharpening angles and interchangeable grinding discs ensure greater flexibility. A completely new, play-free rolling sensation is created by the integrated ball bearings. The ceramic coating on the smoothing side guarantees impressive finishing results.
TWO DISCS
DIAMOND ABRASIVE The industrial diamonds used are suitable for effectively sharpening all steel for knives of any degree of hardness without water. When used correctly, the HORL ® Diamond Standard never needs to be replaced. The 46 μm grain size sharpens efficiently and precisely. In a short time, a high-quality sharpening result is achieved. The discs of the HORL ® 2 CRUISE are not replaceable
CERAMIC SANDING WHEEL After processing with HORL ® Diamond Standard, the ceramic sanding disc noticeably improves the sanding result. Only a few movements are needed for this. The result is a smooth, clean and filigree sharp knife edge.
SUPERIOR EFFICIENCY
Industrial diamonds are considered to be one of the most durable and effective abrasives on the market. Monocrystalline diamonds are harder than any knife steel. Using a galvanic process, the diamonds in the HORL ® Diamond Standard are set at approx. 55% in a nickel bed. After the first grinding processes, the initially rough surface becomes finer and HORL® Diamond Standard achieves the ideal sanding surface.
HOR-2QUERCIA -
Horl - 2 WALNUT - sharpener with diamond and ceramic disc - Made in Germany
HORL ® 2 is the latest technological benchmark in the HORL ® family of sharpeners. Two sharpening angles and interchangeable grinding discs ensure greater flexibility. A completely new, play-free rolling sensation is created by the integrated ball bearings. The ceramic coating on the smoothing side guarantees impressive finishing results.
TWO DISCS
DIAMOND ABRASIVE The industrial diamonds used are suitable for effectively sharpening all steel for knives of any degree of hardness without water. When used correctly, the HORL ® Diamond Standard never needs to be replaced. The 46 μm grain size sharpens efficiently and precisely. In a short time, a high-quality sharpening result is achieved. The discs of the HORL ® 2 CRUISE are not replaceable
CERAMIC SANDING WHEEL After processing with HORL ® Diamond Standard, the ceramic sanding disc noticeably improves the sanding result. Only a few movements are needed for this. The result is a smooth, clean and filigree sharp knife edge.
SUPERIOR EFFICIENCY
Industrial diamonds are considered to be one of the most durable and effective abrasives on the market. Monocrystalline diamonds are harder than any knife steel. Using a galvanic process, the diamonds in the HORL ® Diamond Standard are set at approx. 55% in a nickel bed. After the first grinding processes, the initially rough surface becomes finer and HORL® Diamond Standard achieves the ideal sanding surface.
HOR-2NOCE -
Horl - 2 CRUISE - sharpener with diamond and steel disc - Made in Germany
The HORL ® 2 CRUISE incorporates our state of the art development with a focus on the essential. A constant sharpening angle, our durable diamond coating and a beautiful "chalk" color make HORL ® 2 CRUISE an all-round talent for sharpness in any kitchen. The 20 ° sharpening angle produces fast sharpening results and a stable cutting edge with long-lasting sharpening.
TWO DISCS
DIAMOND ABRASIVE The industrial diamonds used are suitable for effectively sharpening all steel for knives of any degree of hardness without water. When used correctly, the HORL ® Diamond Standard never needs to be replaced. The 46 μm grain size sharpens efficiently and precisely. In a short time, a high-quality sharpening result is achieved. The discs of the HORL ® 2 CRUISE are not replaceable
FOR STAINLESS STEEL SANDING After the sharpening process with the diamond disc, the stainless steel sanding disc smoothes the blade and removes any burrs with the help of its integrated grooves. Only a few movements are needed. The discs of the HORL ® 2 CRUISE are not editable
SUPERIOR EFFICIENCY
Industrial diamonds are considered to be one of the most durable and effective abrasives on the market. Monocrystalline diamonds are harder than any knife steel. Using a galvanic process, the diamonds in the HORL ® Diamond Standard are set at approx. 55% in a nickel bed. After the first grinding processes, the initially rough surface becomes finer and HORL® Diamond Standard achieves the ideal sanding surface.
20 ° SHARPENING ANGLE FOR STABLE SHARPNESS
The 20 ° sharpening angle offers a new sharpness in the shortest possible time. The knife also maintains its sharpness for a long time thanks to the stable cutting edge and is suitable for the widest range of cuts in everyday life in the kitchen. Also excellent for sharpening knives for sports and outdoor use.
THE HORL ® S-PAD FOR CONTINUOUS FLEXIBILITY IN GRINDING
The combination of powerful neodymium magnets and the HORL ® S-Pad ensure that the knife is firmly fixed when sharpening. Reinforced by the non-slip effect of the S-Pad, even small blades can be sharpened correctly by adapting them to the desired height.
HOR-2CRUISE -
Horl - premium sharpening set - 3000 and 6000 stones - strop - SET - Made in Germany
Set consisting of two discs of sharpening stones with # 3000 and # 6000 grit and a leather strop to be used at the end to free the blade of all grinding residues and provide the final sharpening.
The set is designed to further refine the result of the sharpening process after using the diamond and ceramic discs, which are standard in HORL ® sharpeners.
The two discs are simply screwed onto the sharpener instead of the stock ones and are intended to refine the edge of the blade of your high-level knives. The stones can be used without water.
Compatible with HORL ® Sharpener 1. Gen, HORL ® 2 and HORL ® 2 PRO.
This item is not compatible with HORL ® 2 CRUISE.
Strop: Measurements: 25 x 5 cm - Thickness: 5mm
HOR-SET -
Helle Norway - Utvaer by Vox - No.600 - knife
Destination: hunting / hiking
Type of production: semi-handicraft
Country of production: Norway
Blade: 12C27 stainless steel
Finishing: mirror polishing
Handle: Birch wood
Blade Length: 102mm.
Blade thickness: 3mm.
Total length: 221mm.
Balance: back to 2.5cm
Weight: 151g.
Sheath: leather
Notes: Design by Jesper VoxnaesHE-600 -
Helle Norway - Les Stroud Temagami Knife - Knife - No.301
Helle Norway - Les Stroud Temagami Knife - Knife - No.301
Intended use: huntingType of production: semi-artisan
Blade: carbon steel laminate shirogami with sharp steel 62HRC
Handle: Birch
Blade length: 110mm.
Blade Thickness: 3mm.
Overall length: 230mm.
Balancing: back to 2.5cm
Weight: 154g.
Sheath: Leather
More information: http://www.lesstroud.ca/HE-301 -
Kai Japan - Shun Higonokami Personal Steak - DM5900 - Pocket steak knife
This beautiful folding knife is an extremely sought-after accessory, whether used as a gentleman's knife or as a personal steak knife.
The Higonokami style of knives was the very first produced in Japan, in fact it could already be found in 1896, during the Meiji period. One of the main features of the traditional Higo Nokami design is the protruding opening pin when the blade is closed, which allows the blade to be opened smoothly even with one hand.
Shun's Higo Nokami not only includes the traditional opening pin, but also makes improvements to the original design by also going to incorporate a Liner Lock type blade locking system to make the user experience more secure. A modern, thin and sharp VG10 stainless steel was also chosen, making the Higo Nokami perfect for use as a personal steak knife. The Pakkawood handle is enhanced by a central inlaid mosaic pin.
Series: SHUN
Usage: Steak knife, designed for use outside the home
Country of manufacture: Japan
Blade Length: 90mm
Total Length: 200mm
Handle Length: 120mm
Weight: 45g
Blade: VGMAX (VG-10) stainless steel at 61HRC, sharpened to 16° on each side
Handle: Packawood with inlaid mosaic pin and equipped with integrated Liner Lock type security systemDM-5900 -
Helle Norway - Jegermester - No.42 knife
Intended Use: Hunting
Type of production: industrial
Blade: stainless steel Sandvik 12C27
Treatment Lama: -
Handle: Birch
Blade length: 135mm.
Blade Thickness: 2.5mm.
Length closed: -
Total length: 250mm.
Balance: back to 2.5cm
Weight: 128g.
Closing: -
Clip: -
Sheath: Leather
Notes: -HE-42 -
Helle Norway - Temagami Les Stroud Knife - coltello - No. 1300
Les Stroud was born in Mimico - Ontario in 1961.
Canadian musician, filmmaker and survival expert, Les Stroud is best known as the creator, writer, producer, director, cameraman and star of the television series 'SurvivorMan'.This knife is a collaboration between Les and the famous Norwegian company Helle.
Intended use: hunting
Type of production: semi-crafted
Blade: Sandvik 14C28N steel
Handle: Birch
Blade length: 110mm.
Blade thickness: 3mm.
Total length: 230mm.
Balance: set back 2.5cm
Weight: 143g.
Sheath: leather
More information: http://www.lesstroud.ca/HE-1300 -
Kai - Sharpening stone AP-0305 - Grit 400-1000 - knives accessories
Synthetic stone for sharpening with water. Double grain (400 and 1000).
Equipped with plastic support with liquid recovery tray and non-slip rubber feet.
Dimensions:
- only stone length 180 x width 60 x height 30 mm;
- with support length 250 x width 95 x height 55 mm.Quality level: high
AP-0305 -
Kai - Whetstone AP-0304 - Grain 3000 - accessories knives
Pietra giapponese sintetica per affilare ad acqua. Grana fine (3000). Dotata di supporto in plastica con vaschetta di recupero liquidi e piedini antiscivolo in gomma.
Dimensioni:
- solo pietra lunghezza 180 x larghezza 60 x altezza 15 mm;
- con supporto lunghezza 250 x larghezza 95 x altezza 40 mm.
Livello qualitativo: elevatoAP-0304 -
Helle Norway - Vintage Fabrikker Norway knife - PRIVATE COLLECTION - knife
KNIFE WITHDRAWAL FROM A PRIVATE COLLECTION
* Type: Previously purchased
* Condition: Overall in excellent condition, it has some marks on the blade from the years
* Available on the market: no longer in production, difficult to find, dating back to the 90s
* Sharpening: Original
* Marks on the blade: small scratches
* Marks on the handle: no
* Box: without box
* Sheath: in brown leather
* Manuals, Certificates and Warranties: absent
* Checked and certified by our internal laboratoryIntended use: hunting
Type of production: industrial
Blade: Sandvik 12C27 stainless steel
Blade treatment: -
Handle: leather discs
Blade length: 150mm.
Blade thickness: 2.5mm.
Closed Length: -
Total length: 270mm.
Balance: set back to 2.5cm
Weight: 220g.
Closure: -
Clip: -
Sheath: leather
Note: -HE-FAB -
Horl - strip of cowhide for sharpening - strop - AL-P - Made in Germany
Original HORL ® leather made from vegetable tanned cowhide for a professional finish after sharpening. Thanks to its fine-pored surface, the blade is perfectly freed from even the finest residues on the edge after sharpening on stone.
Measurements: 25 x 5 cm - Thickness: 5mm
HOR-AL-P -
Kai - Stone for grinding AP-2455 - grit 80 - accessories for knives
The stone for grinding AP-2455 is equipped with a grain 80, the best tool to smooth depressions or protuberances on the surface of the stones, of the compact choruses and to round off the irregular edges.
Country of production: Japan
Dimensions: 17 x 6 x 1.7 cm
Grain: # 80AP-2455 -
Mercury - Logan Orange by Moreno Franzin - knife
Logan is not a common liner, but hides an epic revolution in the constructive concept!
Unlike traditional liners, Logan has no moving pins, but is born from a 5th titanium monolith. The accurate CNC milling machines produce Logan's body: solid, lightweight, slim and highly functional where the blade rotates on the pin, one With the base, to ensure a high strength and sturdiness. The retractable screws in the body give Logan the ultimate touch of clean elegance.
Purpose: Sportsman / EDC
Type of production: Industrial
Country of production: Maniago - Italy
Blade: D2 Steel at 61HRC hardened vacuum
Blade treatment: beaded blast
Handle: Titanium monolithic 6AL4V and G10
Blade Length: 95mm.
Blade thickness: 3mm.
Closed length: 113mm.
Total length: 205mm.
Closed thickness: 9mm.
Weight: 96g.
Opening: In one hand, with removable T-pin, on the back of the blade
Washers: Teflon
Closure: Liner Lock
Clip: Stainless steel, removable and reversible
Sheath: Upholstered zip pocket
Packing: Cardboard box with Mercury logos
Notes: Design by Moreno FranzinME-LOGOR€188.52Out of stock -
Kai - Polishing Strop Set - 45035020 - leather strop and polishing paste
High quality set for maintenance of razors, knives and gouges.
Composed by:
- Strop, wooden support covered with leather (thickness 2.5 mm) on both sides, size: 340x40x17 mm, weight 138 gr .;
- Polishing paste.
Especially recommended for Kai Shun and Magoroku Composite kitchen knives.
CORAM-215 -
Helle Norway - Skala Foldekniv knife - No.212
Intended use: hunting
Type of production: Industrial
blade production: Norway
Blade: 12C27 stainless steel 59HRC
Blade treatment: -
manicatura: cocobolo wood
Blade length: 85mm.
blade thickness: 3mm.
Closed length: 115
Total length: 200mm.
thick when closed: 1.8 cm
Weight: 117g.
Closing: back lock
Clip: -
Sheath: Brown leather
Packaging: cylindrical cardboard box more cloth cotton branded Helle
Notes: -HE-212 -
Kai - multipurpose keychain - K-7003 - 70s vintage knife
Intended use: key chain / collection
Type of Industrial Production
Blade: stainless steel 420
Production Country: Japan
Handle: Steel plated gold and Chinese lacquer red cinnabar
Blade length: 37mm.
Blade Thickness: 1.5mm.
Overall length: 91mm.
Closed Length: 54mm.
Closing system: -
Weight: 36g.
Chain and key ring: Brass
Packaging: in brown velvet box with logos Kai Cutlery
Notes: very rare product in the late '70s, brand new, in perfect condition12577 -
Helle Norway - Dokka 3L - No.200 knife
Intended Use: Hunting
Type of production: industrial
Production Blade: Norway
Blade: rolled steel cheeks with 18/8 stainless steel 59HRC and sharp
Treatment Lama: -
Handle: Birch wood
Blade length: 85mm.
Blade thickness: 3mm.
Length closed: 115
Total length: 200mm.
Thick when closed: 1.8 cm
Weight: 130g.
Closure: back lock
Clip: -
Sheath: Brown leather
Packaging: cylindrical cardboard case more cotton cloth marked Helle
Notes: -HE-200 -
Helle Norway - Dovre - No.170 coltello
Destinazione d'uso: caccia
Tipo di produzione: industriale
Lama: in acciaio laminato con guance inox 18/8 e tagliente inox 59HRC
Trattamento Lama: -
Manicatura: Betulla e Corian
Lunghezza lama: 70mm.
Spessore della lama: 3mm.
Lunghezza chiuso: -
Lunghezza totale: 170mm.
Bilanciatura: arretrata a 2.5cm
Peso: 58g.
Chiusura: -
Clip: -
Fodero: cuoio
Note: -HE-170 -
Helle Norway - Fjellkniven knife - No.4 knife
Destination of use: hunting
Type of production: industrial
Blade: iin rolled steel with 18/8 stainless steel cheeks and 59HRC stainless steel cutting edge
Blade treatment: -
Handle: Birch
Blade length: 100mm.
Blade thickness: 3mm.
Length closed: -
Total length: 210mm.
Balancing: set back to 2.5cm
Weight: 108g.
Closure: -
Clip: -
Sheath: leather
Note: -HE-4 -
Helle Norway - Harding - No.99 coltello
Destinazione d'uso: caccia/sportivo
Tipo di produzione: industriale
Produzione Lama: Norvegia
Lama: in acciaio laminato con guance inox 18/8 e tagliente inox 59HRC
Trattamento Lama: -
Manicatura: legno di betulla, palissandro ed anelli di cuoio
Lunghezza lama: 99mm.
Spessore lama: 2.5mm.
Lunghezza chiuso: -
Lunghezza totale: 215mm.
Spessore da chiuso: -
Bilanciatura: arretrata, a 1cm.
Peso: 102g.
Chiusura: -
Clip: -
Fodero: in cuoio marrone
Confezione: astuccio cilindrico di cartone più panno in cotone marchiato Helle
Note: -HE-99 -
Helle Norway - Nying - No.55 coltello
Destinazione d'uso: caccia
Tipo di produzione: industriale
Lama: in acciaio laminato con guance inox 18/8 e tagliente inox 59HRC
Trattamento Lama: -
Manicatura: Betulla
Lunghezza lama: 70mm.
Spessore della lama: 2.5mm.
Lunghezza chiuso: -
Lunghezza totale: 165mm.
Bilanciatura: arretrata a 2.5cm
Peso: 82g.
Chiusura: -
Clip: -
Fodero: cuoio
Note: -HE-55 -
Helle Norway - Veidemann - No.53 knife
Intended Use: Hunting
Type of production: industrial
Production Blade: Norway
Blade: rolled steel cheeks with 18/8 stainless steel 59HRC and sharp
Treatment Lama: -
Handle: Birch wood
Blade length: 90mm.
Blade thickness: 3mm.
Length closed: -
Total length: 193mm.
Thick when closed: -
Balance: backward, to 1.5cm.
Weight: 98g.
Closing: -
Clip: -
Sheath: Brown leather
Packaging: cylindrical cardboard case more cotton cloth marked Helle
Notes: -HE-53 -
Helle Norway - Wind knife - No.180 knife
Destination of use: hunting
Type of production: industrial
Blade: in stainless steel with 18/8 stainless steel and 59HRC stainless steel edge
Blade treatment: -
Handle: Birch
Blade length: 80mm.
Blade thickness: 2.5mm.
Length closed: -
Total length: 220mm.
Balancing: set back to 2.5cm
Weight: 96g.
Closure: -
Clip: -
Sheath: leather
Note: -HE-180 -
Kai - Whetstone DM-0600 - Grain 6000/1000 - knives accessories
Kai - Whetstone DM-0600 - Grain 6000/1000 - knives accessories
Japanese synthetic stone for sharpening water. Double Grain: fine (6000) and medium / fine (1000).
Stone Size: 185 (length) x 65 (width) x 30 (height) mm.
Dimensions rubber backing: 198 (length) x 70 (Width) mm
Weight: 752 gr. (812 gr. With stand)Quality level: high
DM-0600 -
Mercury - Combat Black - knife
Mercury - Combat Black - knife
Blade: Integral stainless steel Z50CD15
Total length: 22.5 cm.
Blade length: 12 cm.
Blade thickness: 4 mm.
Handle thickness: 12 mm
Handle Length: 9 cm.
Weight: 160 gr.
Sheath: Black leather2368€72.95Out of stock -
Mercury - Dragon - Knife
Mercury - Dragon - Knife
Integral stainless steel blade Z50CD15
Total length: 22.5 cm.
Blade length: 12 cm.
Blade thickness: 4 mm.Handle thickness: 12 mm
Handle Length: 9 mm
Sheath: Black leatherProduction: Italy
2369€61.48Out of stock