Knives, collection knife, tactical knives, outdoor knives, pocket knives and tools
-
Lame d'autore - N° 70 - 04/2016 - magazine
Rivista a colori, Trimestrale, prodotta e distribuita in Italia dal 1998.
Specializzata in coltelli di tutti i tipi (collezione, artigianali, militari, sportivi e multiuso)In questo numero troverete:
PROFILI: Celso Fiocchi, Pasquale De Bartolomeo
TECNICA: Cucire il fodero
REPORTAGE: Il Cic attraverso le foto di Francesco Pachì, Shot show
TEST: Blackfox Bf-705b Sai, Fällkniven Pc, Prezioso Ferus desert, Spyderco Dogtag folder C188
PROFILO AZIENDA: Kunzi compie 80 anni
STORIA: Pugnali-coltelli da assaltatore, 1915-16; La rinascita della LeppaLame70 -
Lame d'autore - N° 68 - November 2015 - magazine
Rivista a colori, Trimestrale, prodotta e distribuita in Italia dal 1998.
Specializzata in coltelli di tutti i tipi (collezione, artigianali, militari, sportivi e multiuso)In questo numero troverete:
TECNICA: Costruiamo il fodero; Il restauro dei rasoi
REPORTAGE: Achi show, Coltello in festa; Feria de Albacete; Ficx 2015
STORIA: Pugnale da assaltatore 1960; Victorinox in orbita
TEST: Azero 211012; Fkmd Wilson combat Fx.307Cb Rapid response; Outdoor edge Brush demon; North arm knives Osprey; Spyderco Lil' LionSpy C181Gti; Wallet Ninja.lame68 -
Lame d'autore - N° 67 - July 2015 - magazine
Rivista a colori, Trimestrale, prodotta e distribuita in Italia dal 1998.
Specializzata in coltelli di tutti i tipi (collezione, artigianali, militari, sportivi e multiuso)In questo numero troverete:
- Speciale visita a Pattada
- Reportage IWA
- Storia: Pugnale 1936 Opera balilla
- Test:
* Azero 151233
* Black Fox Trackmaster
* Camillus Les Stroud
* Spyderco Brad Southard
lame67 -
Lame d'autore - N° 65 - January 2015 - magazine
Rivista a colori, Trimestrale, prodotta e distribuita in Italia dal 1998.
Specializzata in coltelli di tutti i tipi (collezione, artigianali, militari, sportivi e multiuso)Un grande fascicolo questo n°65 del trimestrale Lame d'autore. Ci sono reportage dal salone della Corporazione italiana coltellinai di Milano e quello di Culter expo, a Novegro (Mi).
Poi un excursus sui coltelli survival di Maurizio Ceracchi e il profilo del coltellinaio piemontese Luciano Ferraudo.
Per la storia, siamo andati a studiare il pugnale per assaltatori del Rei modello 1939 e il Victorinox Soldier.
La sezione della tecnica si occupa della temprabilità e struttura degli acciai.
Imperdibile il glossario dedicato alla lettera C con oltre 50 voci.
Questi i test: Atk Aquitania, Browning Non-typical stag, Crkt Drifter large, Extrema Ratio Resolza, Mitchell Tarlo, Muela 21733-G, Spyderco Domino pin
lame65 -
Lame d'autore - N° 62 - April 2014 - magazine
Color Magazine , Quarterly , produced and distributed in Italy since 1998.
Specializing in knives of all types ( collection , craft , military, sports and multi-purpose)
80 Pages
A number this explosive 62 which inaugurates the 15th year of the magazine Lame author , the first and most important part of the landscape .
Victorinox , however, it turns 130 years old : we went to visit the factory where they produce 120 thousand knives a day. Reporting from the guild hall Italian knife , custom knives with the most interesting of the moment and pictures of Francesco Pachì and shot by American show in Las Vegas. The profile is dedicated to Michael " Cormoran " Sferragatta .
The magazine continues with the technique of sharpening of the razor with the use of very traditional strop ...
These tests : 110 Buck Hunter anniversary , Condor Kukri machete , P3G Fallkniven , Fox knives - Golok Hitam , Great eastern cutlery lockable Maserin GTO , Viper Carnera , Woodlore 25th anniversary .
Of course, much more to be the best survival knife and knives created by readers of the Facebook group .lame63 -
Lame d'autore - N° 62 - April 2014 - magazine
Color Magazine , Quarterly , produced and distributed in Italy since 1998.
Specializing in knives of all types ( collection , craft , military, sports and multi-purpose)
80 Pages
A number this explosive 62 which inaugurates the 15th year of the magazine Lame author , the first and most important part of the landscape .
Victorinox , however, it turns 130 years old : we went to visit the factory where they produce 120 thousand knives a day. Reporting from the guild hall Italian knife , custom knives with the most interesting of the moment and pictures of Francesco Pachì and shot by American show in Las Vegas. The profile is dedicated to Michael " Cormoran " Sferragatta .
The magazine continues with the technique of sharpening of the razor with the use of very traditional strop ...
These tests : 110 Buck Hunter anniversary , Condor Kukri machete , P3G Fallkniven , Fox knives - Golok Hitam , Great eastern cutlery lockable Maserin GTO , Viper Carnera , Woodlore 25th anniversary .
Of course, much more to be the best survival knife and knives created by readers of the Facebook group .LAME62 -
Lame d'autore - Numero 61 - Dicembre - Anno 2013 - rivista
Rivista a colori, Trimestrale, prodotta e distribuita in Italia dal 1998.
Specializzata in coltelli di tutti i tipi (collezione, artigianali, militari, sportivi e multiuso)
80 Pagine
Storia: Coltelli ed ex voto
Tecnica: Teoria dei trattamenti termici degli acciai
Reportage: Culter Expo 2013
Legge: Perché la cassazione ci è ostile?
Profilo: Marcello Garau
Test coltelli: Brusletto Villmann, Condor Koukri, Extrema Ratio Dicok, Fkmd Exagon range, Morris Knives Friction folder, Stuart Mitchell knives Secare, Spyderco Brad Southard Pin, Viper Mathusalemlame61 -
Lame d'autore - Numero 60 - Ottobre - Anno 2013 - rivista
Rivista a colori, Trimestrale, prodotta e distribuita in Italia dal 1998.
Specializzata in coltelli di tutti i tipi (collezione, artigianali, militari, sportivi e multiuso)
80 Pagine
STORIA
Coltellate risorgimentali nello Stato Pontificio
TECNICA
I rasoi con lame sinterizzate
REPORTAGE
Maniago campione d'Europa
PROFILO
Giuseppe Galante
TEST
Brustello Trillemarka
Camillus Les Stroud Sk Arctic
Crkt Ken Onion Foresight
Fantoni Contrast utility tactical
Fox Zero
Gerber Bear Grylls Ultimate pro fixed blade
Lion Steel TiSpine
Victorinox Hunter pro
Viper Rhinolame60 -
Lame d'autore - Numero 59 - Maggio - Anno 2013 - rivista
Rivista a colori Trimestrale prodotta e distribuita in Italia dal 1998, specializzata in coltelli di tutti i tipi (collezione, artigianali, militari, sportivi, multiuso…). 80 Pagine STORIA Gli accoltellatori "tirannicidi" TECNICA Il maglio di Scordia Forgiatura e tempra di Yoshindo Yoshihara L'affilatura “serrated” REPORTAGE Shot Show Iwa Exa TEST Condor Nessmuk Crkt Eraser 8900K Cudeman 123M Cesar Bozal Extrema Ratio Rao Avio Fox Parang Nilte Quiete Viper Freelame59 -
Lame d'autore - Numero 58 - Febbraio - Anno 2013 - rivista
Rivista a colori Trimestrale prodotta e distribuita in Italia dal 1998, specializzata in coltelli di tutti i tipi (collezione, artigianali, militari, sportivi, multiuso…). 80 Pagine PROFILI Pekka Tuominen Marco Selis STORIA Coltelli Toscani TEST Fallkniven GP Fox Tracker Meskwaki Morris Friction Folder Kallioniemi Puukko Maserin Atti Mtech Mini Rockstead Higo-J Spyderco Pingo Viper David e Golia FAI DA TE Picchetto e tensionatore d'emergenza REPORTAGE Cic Show e Culter Expolame58 -
Lame d'autore - Numero 1 - Anno 2003 - rivista
Rivista a colori Trimestrale prodotta e distribuita in Italia dal 1998, specializzata in coltelli di tutti i tipi (collezione, artigianali, militari, sportivi, multiuso…). Ottima qualità grafica, contenuti discretamente documentati, precisi e aggiornati. Alta qualità illustrativa - Pag 80L2003-1 -
Lame d'autore - Numero 2 - Anno 2003 - rivista
Rivista a colori Trimestrale prodotta e distribuita in Italia dal 1998, specializzata in coltelli di tutti i tipi (collezione, artigianali, militari, sportivi, multiuso…). Ottima qualità grafica, contenuti discretamente documentati, precisi e aggiornati. Alta qualità illustrativa - Pag 80L2003-2 -
Lame d'autore - Numero 24 - Ottobre/Novembre/Dicembre 2004 - rivista
Lame d'autore - Numero 24 - Ottobre/Novembre/Dicembre 2004
TEST:
* Conaz - Gobbi
* Surefire - Alpha e Bravo
* Multi Tool Militari
* Fox - Sheridan - vedi la scheda prodotto
* Viper - Serie Caccia - vedi la scheda prodotto
PERSONAGGI:
* Mick Penfold
* Angelo Scotti
ED INOLTRE:
* Lame orientali Citadel
* Le Roncole
* Come nasce un grande coltelloL2004-24 -
Lame d'autore - Numero 25 - Gennaio/Febbraio/Marzo 2005 - rivista
TEST:
* Boker - Voros Neck Knife
* Thiers Issard Sabatier - Regionali francesi
* Fallkniven - TK3 - vedi la scheda prodotto
* Fox - Karambit - vedi la scheda prodotto
PERSONAGGI:
* Rick Bowles
* Ettore Gianferrari
* Fabrizio "Silvester" Silvestrelli
ED INOLTRE:
* I Maestri del Knife Fighting
* Culter Expo
* Show di MilanoL2005-25 -
Lame d'autore - Numero 4 - Anno 2003 - rivista
Rivista a colori Trimestrale prodotta e distribuita in Italia dal 1998, specializzata in coltelli di tutti i tipi (collezione, artigianali, militari, sportivi, multiuso…). Ottima qualità grafica, contenuti discretamente documentati, precisi e aggiornati. Alta qualità illustrativa - Pag 80L2003-4 -
Lame d'autore - Numero 42 - Dicembre Anno 2008 - rivista
Rivista a colori Trimestrale prodotta e distribuita in Italia dal 1998, specializzata in coltelli di tutti i tipi (collezione, artigianali, militari, sportivi, multiuso…). 82 Pagine
INDICE:
* Mostre Show: Arresojas 2008
* Mostre Show: Novegro Culter Expo 2008
* Test: Maserin 995 Aikuchi Ballestra
* Test: Eickhorn CSAR II by Dietmar Pohl
* Tecnica: Materiali Per Coltelli da LC Coltelleria
* Test: Spyderco Jerry Hossom
* Profilo: Jurgen Schanz
* Vintage: Coltellate D'amore
* Test: Fox Intervention UNIFIL
* Intervista: Sandro Mariani
* Test: Steel Tac Commando
* Profilo: Carlo Cavedon
* Test: Viper Maremmano by Silvestrelli
* Storia: Alle origini dello stiletto
* Negozio: Coltelleria Riccadonna
* Test: Wenger New Ranger
* Test: Laguole en AubracL2008-42 -
Lame d'autore - Numero 44 - Aprile - Anno 2009 - rivista
Rivista a colori Trimestrale prodotta e distribuita in Italia dal 1998, specializzata in coltelli di tutti i tipi (collezione, artigianali, militari, sportivi, multiuso…).
Ottima qualità grafica, contenuti discretamente documentati, precisi e aggiornati.
Alta qualità illustrativa
- Pag 80L2009-44 -
Lame d'autore - Numero 45 - Luglio - Anno 2009 - rivista
Rivista a colori Trimestrale prodotta e distribuita in Italia dal 1998, specializzata in coltelli di tutti i tipi (collezione, artigianali, militari, sportivi, multiuso…). 82 Pagine
INDICE:
* Reportage: XIV Espolama di Locarno
* Profilo: Chris Reeve
* Profilo: Francesco Casula
* Legge: Il coltello nel nostro diritto - parte 2
* Storia: Kukuri
* Test: Spyderco ParaMiliary
* Reportage: EXA 2009
* Test: Fox Profili Fixed
* Vintage: Il coltello e le danze popolari dell'800
* Storia: Frosolonesi D'america
* Profilo: Bruno Bruna "Graciùt"
* Test: Coltelli Case
* Test: Wenger Black Out
* Arte: Federica Montaldo
* Aziende: Helle
* Test: Mercury Pianure
* Negozio: Coltelleria Gasperi
* Test: Maserin BirdlandL2009-45 -
Lame d'autore - Numero 48 - Maggio - Anno 2010 - rivista
Rivista a colori Trimestrale prodotta e distribuita in Italia dal 1998, specializzata in coltelli di tutti i tipi (collezione, artigianali, militari, sportivi, multiuso…). 82 Pagine
INDICE:
* Reportage: XII Mostra di Roccagiovine
* Tecnica: Come realizzare un fodero in Kydex
* Test: Fox UTK 635T
* Test: Extrema Ratio MF1 ed Extrema Ratio MF2
* Profilo: Giorgio e Jarno Movilli
* Reportage: Shot Show
* Test: Mac San Marco
* Reportage: IWA 2010
* Test: Viper Venator
* Storia: Roncole
* Profilo: Roberto Bruci
* Test: Maserin Ram 501/OL
* Test: Spyderco Gayle BradleyL2010-48 -
Lame d'autore - Numero 49 - Settembre - Anno 2010 - rivista
Rivista a colori Trimestrale prodotta e distribuita in Italia dal 1998, specializzata in coltelli di tutti i tipi (collezione, artigianali, militari, sportivi, multiuso…). 82 Pagine
INDICE:
* Reportage: XII Mostra di Roccagiovine
* Tecnica: Come realizzare un fodero in Kydex
* Test: Fox UTK 635T
* Test: Extrema Ratio MF1 ed Extrema Ratio MF2
* Profilo: Giorgio e Jarno Movilli
* Reportage: Shot Show
* Test: Mac San Marco
* Reportage: IWA 2010
* Test: Viper Venator
* Storia: Roncole
* Profilo: Roberto Bruci
* Test: Maserin Ram 501/OL
* Test: Spyderco Gayle BradleyL2010-49 -
Lame d'autore - Numero 50 - Dicembre - Anno 2010 - rivista
Rivista a colori Trimestrale prodotta e distribuita in Italia dal 1998, specializzata in coltelli di tutti i tipi (collezione, artigianali, militari, sportivi, multiuso…). 82 Pagine
INDICE:
* Reportage: XII Mostra di Roccagiovine
* Tecnica: Come realizzare un fodero in Kydex
* Test: Fox UTK 635T
* Test: Extrema Ratio MF1 ed Extrema Ratio MF2
* Profilo: Giorgio e Jarno Movilli
* Reportage: Shot Show
* Test: Mac San Marco
* Reportage: IWA 2010
* Test: Viper Venator
* Storia: Roncole
* Profilo: Roberto Bruci
* Test: Maserin Ram 501/OL
* Test: Spyderco Gayle BradleyL2010-50 -
Lame d'autore - Numero 51 - Marzo - Anno 2011 - rivista
Rivista a colori Trimestrale prodotta e distribuita in Italia dal 1998, specializzata in coltelli di tutti i tipi (collezione, artigianali, militari, sportivi, multiuso…). 82 Pagine
INDICE:
* Reportage: XII Mostra di Roccagiovine
* Tecnica: Come realizzare un fodero in Kydex
* Test: Fox UTK 635T
* Test: Extrema Ratio MF1 ed Extrema Ratio MF2
* Profilo: Giorgio e Jarno Movilli
* Reportage: Shot Show
* Test: Mac San Marco
* Reportage: IWA 2010
* Test: Viper Venator
* Storia: Roncole
* Profilo: Roberto Bruci
* Test: Maserin Ram 501/OL
* Test: Spyderco Gayle BradleyL2011-51 -
Lame d'autore - Numero 53 - Ottobre - Anno 2011 - rivista
Rivista a colori Trimestrale prodotta e distribuita in Italia dal 1998, specializzata in coltelli di tutti i tipi (collezione, artigianali, militari, sportivi, multiuso…). 82 Pagine
Ti manca un numero della tua rivista preferita? CLICCA QUI per vedere tutte le riviste disponibili nei nostri magazzini.L2011-53 -
Lame d'autore - Numero 54 - Ottobre - Anno 2012 - rivista
Rivista a colori Trimestrale prodotta e distribuita in Italia dal 1998, specializzata in coltelli di tutti i tipi (collezione, artigianali, militari, sportivi, multiuso…). 88 Pagine
Ti manca un numero della tua rivista preferita? CLICCA QUI per vedere tutte le riviste disponibili nei nostri magazzini.L2012-54 -
Lame d'autore - Numero 55 - Aprile - Anno 2012 - rivista
Rivista a colori Trimestrale prodotta e distribuita in Italia dal 1998, specializzata in coltelli di tutti i tipi (collezione, artigianali, militari, sportivi, multiuso…). 80 Pagine
INDICE:
* Reportage: 34esima edizione Shot Show Las Vegas
* Reportage: CIC 2011
* Test: Spyderco - Des Horn - C153G
* Test: Maserin - Combat Ready
* Test: Lionsteel SR-1
* Test: Viper Tank
Ti manca un numero della tua rivista preferita? CLICCA QUI per vedere tutte le riviste disponibili nei nostri magazzini.L2012-55 -
Lame d'autore - Numero 56 - Luglio - Anno 2012 - rivista
Rivista a colori Trimestrale prodotta e distribuita in Italia dal 1998, specializzata in coltelli di tutti i tipi (collezione, artigianali, militari, sportivi, multiuso…). 80 Pagine
INDICE:
* Reportage: Coutellia
* Reportage: Exa
* Reportage: Sant'Oreste
* Test: Maserin - Diabolik
* Test: Opinel - Outdoor
* Test: Viper - Keeper
* Test: CRKT - Ripple
Ti manca un numero della tua rivista preferita? CLICCA QUI per vedere tutte le riviste disponibili nei nostri magazzini.L2012-56 -
Pacchetto 3 riviste "Lame D'Autore" 2008
Pacchetto anno 2008
3 numeri: dal n. 38 al n.40.
Raccolte della rivista trimestrale Lame D'Autore.
Notizie e cuoriosità dal mondo delle lame:
- presentazioni e monografie dedicate ai più conosciuti ed apprezzati coltellinai italiani ed internazionali;
- novità dalle aziende;
- reportage da mostre e saloni;
- collezionismo;
- prove e recensioni;
- tecnica e cultura del coltello
e molto altro ancora, proposto da una delle più importanti ed autorevoli riviste dedicate agli appassionati di coltelli.
Stampa a colori, su carta patinata.lame2008 -
Pacchetto 4 riviste "Lame D'Autore" collezione 2005
Pacchetto completo anno 2005
4 numeri: dal n. 25 al n. 28.
Raccolte della rivista trimestrale Lame D'Autore.
Notizie e cuoriosità dal mondo delle lame:
- presentazioni e monografie dedicate ai più conosciuti ed apprezzati coltellinai italiani ed internazionali;
- novità dalle aziende;
- reportage da mostre e saloni;
- collezionismo;
- prove e recensioni;
- tecnica e cultura del coltello
e molto altro ancora, proposto da una delle più importanti ed autorevoli riviste dedicate agli appassionati di coltelli.
Stampa a colori, su carta patinata.lame2005 -
Pacchetto 4 riviste "Lame D'Autore" collezione 2006
Pacchetto completo anno 2006
4 numeri: dal n. 29 al n. 32.
Raccolte della rivista trimestrale Lame D'Autore.
Notizie e cuoriosità dal mondo delle lame:
- presentazioni e monografie dedicate ai più conosciuti ed apprezzati coltellinai italiani ed internazionali;
- novità dalle aziende;
- reportage da mostre e saloni;
- collezionismo;
- prove e recensioni;
- tecnica e cultura del coltello
e molto altro ancora, proposto da una delle più importanti ed autorevoli riviste dedicate agli appassionati di coltelli.
Stampa a colori, su carta patinata.lame2006 -
Rockstead - HIGO II X-FCF - ZDP-189 & Dark Matter Gold Carbon Fiber - folding knife
Higo is one of the most beloved models for Rockstead Knives fans around the world, and HIGOⅡX, with a custom Dark Matter Gold (DMG) carbon fiber coating and a titanium back layer, is one more step in the pursuit of perfection. The blade is made of ZDP189 super stainless steel and features a unique convexity with gradually reduced angle (30 degrees at the middle and 24 degrees at the tip). The variable blade angle is the result of Rockstead's long quest for superior sharpness and cutting ability.
Blade: ZDP-189 stainless steel at 66.7HRC
Handle: anodized titanium and Dark Matter Gold carbon fiber
Blade length: 89mm.
Blade thickness: 3.2mm.
Total length: 216mm.
Weight: 138g.
Closure: Frame Lock with SKD11 casement at 61HRC
Clip: made of 402J2 steel at 48HRC
Notes: Accompanied by warranty certificate with full technical specificationsRO-HIGIIX-ZDPDMG -
Rockstead - Shin - Clad ZDP189 & Aluminum and Samekawa - folding knife
With Rockstead brand of Ishida Co. Sakai, Japan, they are currently marketed with the best industrial knives currently in production.
Created by Katsumi Kitano, who for 20 years has been producing quality knives so much to have been awarded the highest award among the knife craftsmen in Japan, you demonstrate exceptional both in cutting capacity, penetration and tightness of the wire both in terms of innovation for and materials used for the construction techniques.
Blade: ZDP189 rolled stainless steel at 66.6 HRC inside and VG10 at 60.8 HRC outside
Handle: Same (real ray skin) and aircraft aluminum with black alumite treatment to HV400
Blade length: 95 mm.
Blade thickness: 4 mm.
Overall length: 210 mm.
Weight: 145 g.
Lock: Liner Lock steel in 52HRC 402J2
Clip: Steel 402J2 to 52HRC
Notes: Accompanied by a certificate of guarantee with the technical specifications.RO-SHIN-ZDP -
Rockstead - Hizen - DLC YXR7 & Duralumin - Folding Knife
With the Rockstead brand of Ishida Co. of Sakai, Japan, the best industrial knives currently in production are currently marketed.
Created by Katsumi Kitano, who for over 20 years has been producing quality knives so as to have been awarded the highest recognition among artisan knives in Japan, they are exceptional both in cutting capacity, penetration and hold of the thread and in innovation for the materials used and for construction techniques.
Intended use: Collection / SportsType of production: Midtech
Country of production: Sakai - Japan
Blade: in Hitachi YXR7 steel at 64HRC
Blade treatment: Black DLC mirror
Handle: A7075 Duralumin with Hv400 hardness anodizing
Blade length: 70mm.
Blade thickness: 3.3mm.
Length closed: 104mm.
Total length: 176mm.
Thick when closed: 11.4mm.
Weight: 74g.
Opening: through ambidextrous pin
Washers: in steel
Closure: FrameLock with wing in SKD11 at 61HRC
Clip: removable, in 420J2 stainless steel of 1mm. with PVD treatment
Packaging: Wooden box with Rockstead logos, certified with serial number and steel hardness test
Notes: -RO-HIZ-DLC -
Rockstead - Hizen - ZDP-189 & Duralumin - Folding Knife made in Japan
Blade: stainless steel ZDP-189 to 67.2HRC
Handle: Duralumin A2024 with anodized surface to HV400
Blade length: 73 mm.
Blade Thickness: 3.5 mm.
Overall length: 176 mm.
Weight: 172 g.
Lock: Frame Lock with a swing in SKD11 61HRC
Clip: Steel 402J2 to 48HRC
Notes: Accompanied by a certificate of guarantee with the technical specifications.RO-HIZ-ZDP189 -
Rockstead - 2010 Higo-MH-DLC Serial #303 - YXR7 HPC & Micarta - PRIVATE COLLECTION - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: In very good condition
* Commercially available Discontinued
* Sharpening: Factory
* Marks on blade: -
* Marks on handle: - -
* Box: marketed in silk pouch.
* Scabbard: Leather, belt, original, with a few small marks given by time.
* Manuals, Certificates and Warranties: present.
* Checked and Certified by our in-house laboratory
The HIGO-MH-DLC folder features a 3.5-inch YXR7 blade with DLC coating and Micarta handle. The incredible mirror finish is achieved by heat treating the blade and gradually grinding by hand with wet and dry sandpaper of 400, 600, 800, 1,200 and 2,000. The HIGO-MH-DLC comes with a black leather belt case with a slot to hold the included torx wrench.
Country of manufacture: Japan
Type of manufacture: midtech
Blade: DLT571 steel (Hitachi YXR7 at 64.1HRC with 3micron HPC coating and hardness of Hv1300)
Handle: 2mm stainless steel sus402J2 at 52HRC with micarta handles
Blade length: 90mm.
Blade thickness: 3.5mm.
Total length: 216mm.
Weight: 139g.
Closure: Liner Lock
Clip: stainless steel
Notes: Serial number 303 - 2010 knife accompanied by warranty certificate with technical specifications - Model discontinued and no longer commercially availableRO-HIMHDLC-CP -
Andre De Villiers ADV - 2018 Ronin - S35VN & Integral Blackwashed Titanium - PRIVATE COLLECTION - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased.
* Condition: Like New
* Commercially available 2018 Exemplar; currently offering other variants in other configurations.
* Sharpening: Factory.
* Marks on blade: None
* Marks on handle: None
* Box: Present
* Scabbard: -
* Manuals, Certificates and Warranties: -
* Checked and Certified by our in-house laboratory
Intended use: collectible/sporting/military
Production type: Midtech
Country of manufacture: South Africa
Blade: stainless steel CPM-S35VN
Blade treatment: blackwash
Handle: integral, machined titanium from solid, blackwash finish
Blade length: 103mm.
Blade thickness: 4.5mm.
Length closed: 132mm.
Total length: 234mm.
Thickness when closed: 16mm.
Weight: 191g.
Opening: Carson Flipper type, on ball bearings
Closure: FrameLock
Clip: titanium, machined from billet
Packaging: plastic case with ADV Tactical logos
Notes: entirely designed and built by Andre De Villiers in his own workshopADV-RBTI-CP -
Rockstead - 2010 Higo-ST Serial #005 - YR7 HPC & Duralumin - PRIVATE COLLECTION - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Like new
* Commercially available Discontinued
* Sharpening: Factory
* Marks on blade: None
* Marks on handle: None
* Box: Present
* Scabbard: -
* Manuals, Certificates and Warranties: Present
* Checked and Certified by our in-house laboratory.
The best industrial knives currently in production are marketed under the Rockstead brand. Created by Katsumi Kitano, who has been making quality knives for more than 20 years to the extent that he has been awarded the highest distinction among artisan knife makers in Japan, they prove to be exceptional both in cutting ability, penetration and edge-holding and in the level of innovation for the materials used and construction techniques.
Country of production: Japan
Type of production: midtech
Blade: Hitachi YXR7 steel at 64.8HRC with 3micron HPC coverage and hardness of Hv1800
Handle: Duralumin A2024 with surface anodizing and hardness of Hv400
Blade length: 90mm.
Blade thickness: 3.5mm.
Total length: 215mm.
Weight: 130g.
Closure: Frame Lock with SKD11 casement at 61HRC
Clip: made of 402J2 steel at 48HRC
Notes: Serial number 005 - 2010 knife accompanied by warranty certificate with technical specifications - Model discontinued and no longer commercially availableRO-HISTHPC-CP -
Andre De Villiers ADV - Alpha-S Flipper Knife Laser Engraved - S35VN & G10 - knife
Intended use: collection/sporting
Type of production: MidTech (partially mechanized craft production)
Country of manufacture: South Africa
Blade: stainless steel CPM-S35VN
Blade finish: satin-finished
Handle: PVD titanium with G10 insert
Blade length: 92mm.
Blade thickness: 4mm.
Length closed: 114mm.
Total length: 206mm.
Thickness when closed: 14mm.
Weight: 150g.
Opening: Carson Flipper system on ball bearings
Closure: Button Lock with additional safety
Clip: titanium, laser engraved
Packaging: Nylon pouch with ADV Tactical logos
Notes: Designed and built by Andre De VilliersADV-AS-G10E -
Andre De Villiers ADV - Badlands Bowie - Dual Tone S35VN, Titanium & Fat Carbon - knife
Intended use: collection/sporting
Type of production: MidTech (partially mechanized craft production)
Country of manufacture: South Africa
Blade: stainless steel CPM SW35VN
Blade finish: Dual Tone - Sandblasted and Satin finish
Handle: Titanium Dual Tone with Fat Carbon Snake Skin insert
Blade Length: 105mm.
Blade thickness: 4.8mm.
Length closed: 130mm.
Total length: 230mm.
Thickness when closed: 17mm.
Balance: backward
Weight: 248g.
Opening: carson Flipper system on ball bearings
Closure: Frame Lock with removable stainless steel clapper
Clip: Titanium Dual Tone, machined from billet, removable and reversible
Packaging: Nylon pouch with ADV Tactical logos
Notes: Designed and built by Andre De VilliersADV-BB-TF -
Rockstead - CHI ZDP - Shinogi Zukuri Clad Steel SanMai ZDP189 - knife made in Japan
Under the brand name Rockstead, from Ishida Co. in Sakai, Japan, the best industrial knives currently in production are currently marketed: created by Katsumi Kitano, who has been making quality knives for over 30 years to the extent that he has been awarded the highest distinction among artisan knife makers in Japan, they prove to be exceptional both in cutting ability, penetration and edge-holding and in innovation in the materials used and construction techniques.
Intended Use: Collection/Sportsman
Type of production: Midtech
Country of manufacture: Sakai - Japan
Blade: rolled stainless steel ZDP189 at 66.4 HRC on the inside and VG10 at 61.3 HRC on the outer cheeks
Blade treatment: mirror polish
Handle: Aluminum A6063S with anodization to Hv400 hardness and genuine Breed leather inserts
Blade length: 82mm.
Blade thickness: 3.7mm.
Length closed: 111mm.
Total length: 189mm.
Thickness when closed: 16.2mm.
Weight: 133g.
Opening: via ambidextrous pin
Washers: steel
Closure: Sub FrameLock of 2mm. made of SUS402J2 stainless steel at 50HRC
Clip: deep pocket, 1mm. 420J2 stainless steel with PVD treatment
Packaging: Wooden box with Rockstead logos, certificate with serial number and steel hardness test
Notes: Shinogi Zukuri type blade sharpeningR-CHIZDP -
Andre De Villiers ADV - Kudu Hunter Fixed - M390 & Black G10 - knife
The Kudu Hunter fixed-blade knife offers an excellent balance between form and function: the wide drop point blade is reminiscent of its predecessor model Harpoon, but without the dedicated thumb rest. The handle is extremely comfortable for different types of grips, and its shape does not cause fatigue during long periods of use. The Kydex scabbard has a Kydex belt loop that allows you to switch between normal belt carry and scout carry, right or left handed, with ease. This is truly an excellent "all-around" design by Andre.
Intended use: collection/sporting
Type of manufacture: midtech
Country of manufacture: South Africa
Blade: full tang, stainless steel M390
Blade treatment: Satin finish
Handle: Black G10
Blade length: 115mm.
Blade thickness: 4.8mm.
Total length: 228mm.
Balance: backward
Weight: 205g.
Sheath: carbon fiber-effect kydex with multi-position belt attachment
Packaging: -
Notes: designed and made entirely by Andre De VilliersADV-KH -
Rockstead - Higo II F-HTI-ZDP - Titanium ZDP-189 - knife
With the Rockstead brand of Ishida Co. of Sakai, Japan, the best industrial knives currently in production are currently marketed.
Created by Katsumi Kitano, who for over 20 years has been producing quality knives so as to have been awarded the highest recognition among artisan knives in Japan, they are exceptional both in cutting capacity, penetration and tightness of the thread and in innovation for the materials used and for construction techniques.
Intended use: Collection / SportsType of production: Midtech
Country of production: Sakai - Japan
Blade: ZDP189 stainless steel hardened to 66.5HRC
Blade treatment: mirror polished
Handle: titanium
Blade length: 90mm.
Blade thickness: 3mm.
Closed length: 120mm.
Total length: 216mm.
Thick when closed: 12.2mm.
Weight: 136g.
Opening: through ambidextrous pin
Washers: in brass
Closure: FrameLock with wing in SKD11 at 61HRC
Clip: removable, in 420J2 stainless steel with PVD treatment
Packaging: Wooden box with Rockstead logos, certified with serial number and steel hardness test
Notes: Serial number # 096 - Date of production 05 July 2019HIGOIIHTIZ -
Rockstead - Shin knife DLC - YXR7 - knife
This knife blade is convex on both sides in the tradition of the highly praised Japanese sword. This shape is both sharp and strong, and can still slice cleanly through a sheet of paper even after the punishment of chopping and cutting through dried bamboo. Using this special blade shape is an excellent way of allowing an edge to be thick without sacrificing any of its sharpness. This knife is of preeminent sharpness. This is a durable knife with strong cutting capabilities that will last for a long time. Even when used for rigorous cutting, the blade will not bite or catch thanks to its convex shape. Other knives will often bite or catch, and may acquire nicks if pulled out suddenly.
Blade: XR-7 steel at 64.3 HRC with DLC treatment
Handle: Same (real breed leather) and aeronautical aluminum with Hv400 black alumite treatment
Blade length: 95 mm.
Blade thickness: 4 mm.
Total length: 210 mm.
Weight: 145 g.
Closing: Liner Lock in 402J2 steel at 52HRC
Clip: in 402J2 steel at 52HRC
Notes: Accompanied by a warranty certificate with technical specifications.RS-SHIN-B -
Andre De Villiers ADV - Double Flipper Pathfinder Knife - Bronze Titanium
Intended use: collection / sport / military
Type of production: artisan
Country of production: South Africa
Blade: stainless steel N690Co
Blade treatment: dual tone satin
Handle: titanium anodized
Blade length: 100mm.
Blade thickness: 4.7mm.
Length closed: 130mm.
Total length: 226mm.
Thick when closed: 13.2mm.
Balancing: 2cm back from the guard branch
Weight: 212g.
Opening: Flipper type on ball bearings
Closure: FrameLock
Clip: titanium anodized, machined from solid
Packaging: cordura case with ADV Tactical logos
Notes: Designed and built by Andre De VilliersADV-DF-P -
Andre De Villiers ADV - Double Flipper Frag Frame Knife - Black Titanium - knife
Intended use: collection / sports / militaryType of production: artisan seeds
Country of production: South Africa
Blade: N690Co stainless steel
Blade treatment: Black
Handle: Black titanium
Blade length: 100mm.
Blade thickness: 4.7mm.
Closed length: 130mm.
Total length: 226mm.
Thick when closed: 13.2mm.
Balance: 2cm set back from the guard branch
Weight: 212g.
Opening: Flipper on ball bearings
Closure: FrameLock
Clip: anodised titanium, machined from solid
Packaging: cordura case with ADV Tactical logos
Notes: Designed and built by Andre De VilliersADV-DF-B -
Andre De Villiers ADV - Harpoon Fixed knife - Black G10
Intended use: collection / sport / military
Type of production: semi-handmade
Country of production: South Africa
Blade: full tang, in N690Co stainless steel
Blade treatment: satin finish
Handle: G10
Blade length: 106mm.
Blade thickness: 4.7mm.
Total length: 228mm.
Balancing: set back, at 2cm. from the guard branch
Weight: 216g.
Sheath: in kydex, acon Tek-Lok attacks
Packaging: cordura case with ADV Tactical logos
Notes: designed and built by Andre De VilliersADV-HF-CB -
Andre De Villiers ADV - Harpoon Fixed knife - Green G10 - knife
Intended use: collection / sports / military
Type of production: artisan seeds
Country of production: South Africa
Blade: full tang, in N690Co stainless steel
Blade treatment: satin finish
Handle: G10
Blade length: 106mm.
Blade thickness: 4.7mm.
Total length: 228mm.
Balancing: set back, at 2cm. from the guard branch
Weight: 216g.
Sheath: in kydex, with Tek-Lok type attacks
Packaging: -
Notes: designed and built by Andre De VilliersADV-HF-SG -
Andre De Villiers ADV - Impi - jaracanda burl - knife
Intended use: collection / sport
Type of production: artisan
Country of production: South Africa
Blade: in steel D2
Blade treatment: satin
Handle: in steel, with inserts in Jaracanda briarwood
Blade length: 80mm.
Blade thickness: 4mm.
Length closed: 110mm.
Total length: 190mm.
Thick when closed: 14mm.
Balancing: set back to 2cm from the guard branch
Weight: 164g.
Opening: Nail Nick
Closure: BackLock
Clip: absent
Packaging: cordura case with ADV Tactical logos
Notes: designed and built by Andre De VilliersADV-IM-RSJ -
Rockstead - Higo II X-CF-ZDP - Carbon Fiber ZDP-189 - knife
With the Rockstead brand of Ishida Co. of Sakai, Japan, the best industrial knives currently in production are currently marketed.
Created by Katsumi Kitano, who for over 20 years has been producing quality knives so as to have been awarded the highest recognition among artisan knives in Japan, they are exceptional both in cutting capacity, penetration and hold of the thread and in innovation for the materials used and for construction techniques.
Intended use: Collection / SportsType of production: Midtech
Country of production: Sakai - Japan
Blade: ZDP189 stainless steel hardened to 66.4HRC
Blade treatment: mirror polished
Handle: anodised titanium and carbon fiber
Blade length: 89mm.
Blade thickness: 3mm.
Closed length: 120mm.
Total length: 216mm.
Thick when closed: 15.8mm.
Weight: 133g.
Opening: through ambidextrous pin
Washers: in steel
Closure: FrameLock with wing in SKD11 at 61HRC
Clip: removable, in 420J2 stainless steel with PVD treatment
Packaging: Wooden box with Rockstead logos, certified with serial number and steel hardness test
Notes: Serial number # 028 - Date of production April 23, 2019HIGOIIXCF -
Andre De Villiers ADV - Mini Butcher Back Lock Knife - Ebony Wood
Intended use: collection / sport
Type of production: semi-handmade
Country of production: South Africa
Blade: N690Co Stainless Steel
Blade treatment: Satin
Handle: in steel, with ebony wood inserts
Blade length: 52mm.
Blade thickness: 2.2mm.
Length closed: 72mm.
Total length: 124mm.
Thick when closed: 8.5mm.
Balancing: set back
Weight: 44g.
Opening: Nail Nick
Closure: BackLock
Clip: Absent
Packaging: cordura case with ADV Tactical logos
Notes: designed and built by Andre De VilliersADV-MB-E -
Andre De Villiers ADV - Mini Impi Slipjoint Knife - Abalone
Intended use: collection / sport
Type of production: semi-handmade
Country of production: South Africa
Blade: in steel N690Co
Blade treatment: Satin
Handle: in steel, with abalone inserts
Blade length: 52mm.
Blade thickness: 2.2mm.
Length closed: 72mm.
Total length: 124mm.
Thick when closed: 8.5mm.
Balancing: set back
Weight: 44g.
Opening: Nail Nick
Closure: Slipjoint
Clip: Absent
Packaging: cordura case with ADV Tactical logos
Notes: designed and built by Andre De VilliersADV-MI-A -
Andre De Villiers ADV - Harpoon Black Fixed knife - Black G10 - knife
Intended use: collection / sport
Type of production: artisan seeds
Country of production: South Africa
Blade: in D2 steel
Blade treatment: satin finish
Handle: steel with Jaracanda briar inserts
Blade length: 75mm.
Blade thickness: 4 mm.
Length closed: 100mm.
Total length: 175mm.
Thick when closed: 14mm.
Balance: 2 cm set back from the guard branch
Weight: 120 g.
Opening: Nail Nick
Closure: Slip Joint (without blade lock)
Clip: -
Packaging: cordura case with ADV tactical logos
Notes: Designed and manufactured by Andre De VilliersADV-HF-B -
Andre De Villiers ADV - Mini Harpoon Black - Prototype - folding knife
Intended use: collection / sport / military
Type of production: semi-handmade
Country of production: South Africa
Blade: N690Co steel
Blade treatment: PVD blackwash
Handle: titanium blackwash PVD
Blade length: 77mm.
Blade thickness: 4mm.
Length closed: 102mm.
Total length: 177mm.
Thick when closed: 11.7mm.
Balancing: set back, at 2cm. from the guard branch
Weight: 108g.
Opening: Carson Flipper type on ball bearings
Closure: FrameLock
Clip: titanium, machined from solid
Packaging: cordura case with ADV Tactical logos
Notes: marked as "prototype" - designed and built by Andre De VilliersADV-MH-B -
Andre De Villiers ADV - Impi Back Lock Knife Rosewood - knife
Purpose: collection / sport
Type of production: artisanal seed
Country of Origin: South Africa
Blade: D2 steel
Blade treatment: Satin
Handle: Steel with Rosewood wood inserts
Blade Length: 80mm.
Blade thickness: 4mm.
Closed length: 110mm.
Total length: 190mm.
Closed thickness: 14mm.
Balance: 2cm back from the guard branch
Weight: 164g.
Opening: Nail Nick
Closing: Back Lock
Clip: -
Packing: Cordura case with ADV Tactical logos
Notes: Designed and built by Andre De VilliersADV-IM-RW -
Andre De Villiers ADV - Ronin Hybrid Folding Flipper Knife - Tan G10
Intended use: collection / sport / military
Type of production: artisan
Country of production: South Africa
Blade: CPM S35VN steel
Blade treatment: satin
Handle: titanium and G10
Blade length: 103mm.
Blade thickness: 4.5mm.
Length closed: 132mm.
Total length: 234mm.
Thick when closed: 14mm.
Balancing: on the guard branch
Weight: 168g.
Opening: Carson Flipper type, on ball bearings
Closing: FrameLock with additional cursor lock
Clip: titanium, machined from solid
Packaging: cordura case with ADV Tactical logos
Notes: Designed and built by Andre De VilliersADV-RH-T -
Andre De Villiers ADV - Double Flipper DF Frame Lock Knife - Grey/Bronze Titanium
Intended use: collection / sports / military
Type of production: artisan seeds
Country of production: South Africa
Blade: N690Co stainless steel
Blade treatment: Satin
Handle: Dual Tone titanium anodized
Blade length: 100mm.
Blade thickness: 4.7mm.
Closed length: 130mm.
Total length: 226mm.
Thick when closed: 13.2mm.
Balance: 2cm set back from the guard branch
Weight: 212g.
Opening: Flipper on ball bearings
Closure: FrameLock
Clip: anodised titanium, machined from solid
Packaging: cordura case with ADV Tactical logos
Notes: Designed and built by Andre De VilliersADV-DF-BP -
Rockstead - Chou HPC - Black Silk - neck knife
With the Rockstead brand, of Ishida Co. in Sakai, Japan, the best industrial knives currently in production are currently being marketed.
Created by Katsumi Kitano, who has been producing quality knives for over 20 years, to the extent that they have been awarded the highest recognition among the artisanal cutlers in Japan, they prove to be exceptional both in cutting, penetration and thread strength and in terms of innovation for the materials used and for construction techniques.
Blade: Hitachi YXR7 65HRC steel with HPC titanium cover
Handle: interweaving in silk tied by hand
Blade length: 45 mm.
Blade thickness: 4 mm.
Total length: 120 mm.
Weight: 60 g.
Sheath: neck, in Kydex
Notes: Accompanied by silk bag and certificate of guarantee with technical specifications.4069BLACK -
Andre De Villiers ADV - Harpoon F17 Black knife - knife
Purpose: collection / sport / military
Type of production: artisanal seed
Country of Origin: South Africa
Blade: N690Co stainless steel
Blade treatment: black
Handle: black titanium
Blade Length: 95mm.
Blade thickness: 4.5mm.
Closed length: 130mm.
Overall length: 226mm.
Closed thickness: 14mm.
Balance: 2cm back from the guard branch
Weight: 210g.
Opening: Pinballs on bearings
Closure: Frame Lock
Clip: titanium
Packing: Cordura case with ADV Tactical logos
Notes: Designed and built by Andre De VilliersADV-HA-B -
Andre De Villiers ADV - Tac Butcher Black knife
Purpose: collection / sport / military
Type of production: artisanal seed
Country of Origin: South Africa
Blade: D2 steel
Blade treatment: black stonewash
Handle: Titanium stonewash
Blade Length: 95mm.
Blade thickness: 4.5mm.
Closed length: 130mm.
Overall length: 226mm.
Closed thickness: 14mm.
Balance: 2cm back from the guard branch
Weight: 222g.
Opening: Pinballs on bearings
Closure: Frame Lock
Clip: titanium
Packing: Cordura case with ADV Tactical logos
Notes: Designed and built by Andre De VilliersADV-TB-BW -
Andre De Villiers ADV - Pathfinder Knife OD Green
Purpose: collection / sport / military
Type of production: artisanal seed
Country of Origin: South Africa
Blade: CPM SW35VN steel
Blade treatment: black
Handle: green titanium
Blade Length: 95mm.
Blade thickness: 4.5mm.
Closed length: 130mm.
Overall length: 226mm.
Closed thickness: 14mm.
Balance: 2cm back from the guard branch
Weight: 210g.
Opening: Pinballs on bearings
Closure: Frame Lock
Clip: titanium
Packing: Cordura case with ADV Tactical logos
Notes: Designed and built by Andre De VilliersADV-PA-GR -
Andre De Villiers ADV - Pathfinder Knife G2 Black knife
Purpose: collection / sport / military
Type of production: artisanal seed
Country of Origin: South Africa
Blade: CPM SW35VN steel
Blade treatment: black
Handle: black titanium
Blade Length: 95mm.
Blade thickness: 4.5mm.
Closed length: 130mm.
Overall length: 226mm.
Closed thickness: 14mm.
Balance: 2cm back from the guard branch
Weight: 210g.
Opening: Pinballs on bearings
Closure: Frame Lock
Clip: titanium
Packing: Cordura case with ADV Tactical logos
Notes: Designed and built by Andre De VilliersADV-PA-B -
Andre De Villiers ADV - Trailboss S Barret Brown Knife
Purpose: collection / sport
Type of production: artisanal seed
Country of Origin: South Africa
Blade: CPM SW35VN steel
Blade Treatment: Sandblasted
Handle: Titanium Desert
Blade Length: 95mm.
Blade thickness: 4.5mm.
Closed length: 130mm.
Overall length: 223mm.
Closed thickness: 14mm.
Balance: 2cm back from the guard branch
Weight: 216g.
Opening: Pinballs on bearings
Closure: Frame Lock
Clip: titanium
Packing: Cordura case with ADV Tactical logos
Notes: Designed and built by Andre De VilliersADV-TR-B -
Andre De Villiers ADV - Mini Pathfinder Knife LSCF Ti - knife
Purpose: collection / sport
Type of production: artisanal seed
Country of Origin: South Africa
Blade: CPM SW35VN steel
Blade treatment: Satin
Handle: Titanium bronze with carbon fiber insert
Blade Length: 80mm.
Blade thickness: 4mm.
Closed length: 110mm.
Total length: 190mm.
Closed thickness: 14mm.
Balance: 2cm back from the guard branch
Weight: 142g.
Opening: Pinballs on bearings
Closure: Frame Lock
Clip: titanium
Packing: Cordura case with ADV Tactical logos
Notes: Designed and built by Andre De VilliersADV-MP-CF -
Andre De Villiers ADV - Mini Pathfinder Knife 3D Blue Ti - knife
Purpose: collection / sport
Type of production: artisanal seed
Country of Origin: South Africa
Blade: CPM SW35VN steel
Blade treatment: Satin
Handle: blue titanium
Blade Length: 80mm.
Blade thickness: 4mm.
Closed length: 110mm.
Total length: 190mm.
Closed thickness: 14mm.
Balance: 2cm back from the guard branch
Weight: 144g.
Opening: Pinballs on bearings
Closure: Frame Lock
Clip: titanium
Packing: Cordura case with ADV Tactical logos
Notes: Designed and built by Andre De VilliersADV-MP-B -
Andre De Villiers ADV - Impi Slip Joint Knife - Jaracanda briar - knife
Intended use: collection / sport
Type of production: artisan seeds
Country of production: South Africa
Blade: in D2 steel
Blade treatment: satin finish
Handle: steel with Jaracanda briar inserts
Blade length: 75mm.
Blade thickness: 4 mm.
Length closed: 100mm.
Total length: 175mm.
Thick when closed: 14mm.
Balance: 2 cm set back from the guard branch
Weight: 120 g.
Opening: Nail Nick
Closure: Slip Joint (without blade lock)
Clip: -
Packaging: cordura case with ADV tactical logos
Notes: Designed and manufactured by Andre De VilliersADV-IM-RS -
Mercury - Logan Orange by Moreno Franzin - knife
Logan is not a common liner, but hides an epic revolution in the constructive concept!
Unlike traditional liners, Logan has no moving pins, but is born from a 5th titanium monolith. The accurate CNC milling machines produce Logan's body: solid, lightweight, slim and highly functional where the blade rotates on the pin, one With the base, to ensure a high strength and sturdiness. The retractable screws in the body give Logan the ultimate touch of clean elegance.
Purpose: Sportsman / EDC
Type of production: Industrial
Country of production: Maniago - Italy
Blade: D2 Steel at 61HRC hardened vacuum
Blade treatment: beaded blast
Handle: Titanium monolithic 6AL4V and G10
Blade Length: 95mm.
Blade thickness: 3mm.
Closed length: 113mm.
Total length: 205mm.
Closed thickness: 9mm.
Weight: 96g.
Opening: In one hand, with removable T-pin, on the back of the blade
Washers: Teflon
Closure: Liner Lock
Clip: Stainless steel, removable and reversible
Sheath: Upholstered zip pocket
Packing: Cardboard box with Mercury logos
Notes: Design by Moreno FranzinME-LOGOR€188.52Out of stock